R.M.K.

ENGINEERING COLLEGE
(An Autonomous Institution)
R.S.M Nagar, Kavaraipettai, Gummidipoondi Taluk, Thiruvallur District, Tamil Nadu- 601206
Affiliated to Anna University, Chennai / Approved by AICTE, New Delhi/Accredited by NAAC with A+ Grade
An ISO 9001:2015 Certified Institution / All the Eligible UG Programs are Accredited by NBA, New Delhi
B.E. / B.TECH- ELECTRICAL AND ELECTRONICS ENGINEERING
REGULATIONS – 2022
CHOICE BASED CREDIT SYSTEM
PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. The graduates of the program will have strong foundation in Mathematics, Basic
Sciences and Engineering fundamentals.
2. The graduates of the program will excel in profession through effective
communication, team work, leadership skills and ethical behavior.
3. The graduates of the program will have competency in providing optimal
solutions to societal problems with a global outlook.
PROGRAM OUTCOMES (POs)
After the successful completion of the program, the graduates will be able to:
1. Engineering knowledge: Apply the knowledge of mathematics, science, engineering
fundamentals, and an engineering specialization to the solution of complex engineering
problems.
2. Problem analysis: Identify, formulate, review research literature, and analyze complex
engineering problems reaching substantiated conclusions using first principles of mathematics,
natural sciences, and engineering sciences.
3. Design/development of solutions: Design solutions for complex engineering problems and
design system components or processes that meet the specified needs with appropriate
consideration for the public health and safety, and the cultural, societal, and environmental
considerations.
4. Conduct investigations of complex problems: Use research-based knowledge and research
methods including design of experiments, analysis and interpretation of data, and synthesis of
the information to provide valid conclusions.
5. Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern
engineering and IT tools including prediction and modeling to complex engineering activities
with an understanding of the limitations.
6. The engineer and society: Apply reasoning informed by the contextual knowledge to assess
societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to
the professional engineering practice.
7. Environment and sustainability: Understand the impact of the professional engineering
solutions in societal and environmental contexts, and demonstrate the knowledge of, and need
for sustainable development.
8. Ethics: Apply ethical principles and commit to professional ethics and responsibilities and
 norms of the engineering practice.
9. Individual and team work: Function effectively as an individual, and as a member or leader
in diverse teams, and in multidisciplinary settings.
10. Communication: Communicate effectively on complex engineering activities with the
engineering community and with society at large, such as, being able to comprehend and write
effective reports and design documentation, make effective presentations, and give and receive
clear instructions.
11. Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a member and
leader in a team, to manage projects andin multidisciplinary environments.
12. Life-long learning: Recognize the need for, and have the preparation and ability to engage
in independent and life-long learning in the broadest context of technological change.

PROGRAMME SPECIFIC OUTCOMES (PSOs)

After the successful completion of the program, the graduates will be able to:
1. Analyze the performance of complex interconnected Power system.
2. Implement latest technological developments in the field of Control and Automation.
3. Apply cutting edge technology to trouble shoot Electrical equipment.
4. Develop managerial skills to establish Start-up Company in the field of Engineering and
Technology.

MAPPING OF PROGRAMME EDUCATIONAL OBJECTIVES WITH PROGRAMME

OUTCOMES

A broad relation between the programme objective and the outcomes is given in the following
table

PROGRAMME PROGRAMME OUTCOMES

EDUCATIONAL 1 2 3 4 5 6 7 8 9 10 11 12
OBJECTIVES
I
√ √ √ √ √
II
√ √ √ √ √ √
III
√ √ √ √ √ √ √ √ √ √ √ √

MAPPING OF PROGRAM SPECIFIC OBJECTIVES WITH PROGRAMME

OUTCOMES

A broad relation between the Program Specific Objectives and the outcomes is given in the
following table
PROGRAMME SPECIFIC PROGRAMME OUTCOMES
OBJECTIVES 1 2 3 4 5 6 7 8 9 10 11 12
I
3 3 3 2 2
II
3 3 2 2 3
III
3 3 2 2 3

IV 3 3 3 3 3 3 3 3 3 3 3 3

Contribution 1: Reasonable 2: Significant 3: Strong

 R.M.K. ENGINEERING COLLEGE
(An Autonomous Institution)
R.S.M Nagar, Kavaraipettai, Gummidipoondi Taluk, Thiruvallur District, Tamil Nadu- 601206
Affiliated to Anna University, Chennai / Approved by AICTE, New Delhi/Accredited by NAAC with A+ Grade
An ISO 9001:2015 Certified Institution / All the Eligible UG Programs are Accredited by NBA, New Delhi

B.E. / B.TECH- ELECTRICAL AND ELECTRONICS ENGINEERING

REGULATIONS – 2022
CHOICE BASED CREDIT SYSTEM
I - II SEMESTER CURRICULUM AND SYLLABI

SEMESTER – I
Sl. Course Contact
Course Title Category L T P C
No. Code Periods
THEORY COURSES WITH LABORATORY COMPONENT

1 22MA101 Matrices and Calculus BSC 5 3 0 2 4

Physics for Electronics BSC 5 3 0 2 4

2 22PH102
Engineering

3 22CS101 Problem Solving using C++ ESC 5 3 0 2 4

Software Development ESC 5 3 0 2 4

4 22CS102
Practices
Basics of Electrical ESC 5 3 0 2 4
5 22EE103
Engineering

6 22HS101 Professional Communication HSMC 4 2 0 2 3

LABORATORY COURSES

7 22ME111 Product Development Lab - 1 EEC 2 0 0 2 1

MANDATORY COURSES

Environmental Sciences and

8 22CH104 MC 2 2 0 0 0
Sustainability (Non Credit)
Induction Program (Non
9 MC 3 Weeks
Credit)
TOTAL 33 19 0 14 24
 SEMESTER – II
Sl. Course Contact
Course Title Category L T P C
No. Code Periods
THEORY COURSES WITH LABORATORY COMPONENT

Transforms and Numerical

1 22MA201 BSC 5 3 0 2 4
Methods

2 22CS201 Data Structures ESC 5 3 0 2 4

3 22CH101 Engineering Chemistry BSC 5 3 0 2 4

Database Management
4 22IT202 ESC 5 3 0 2 4
System

5 22CS202 Java Programming ESC 5 3 0 2 4

LABORATORY COURSES WITH THEORY COMPONENT

Computer aided Engineering

6 22ME202 ESC 3 1 0 2 2
Graphics
LABORATORY COURSES

7 22ME211 Product Development Lab- 2 EEC 2 0 0 2 1

AUDIT COURSES

8 Yoga for Stress Management AC 1 1 0 0 0

TOTAL 31 17 0 14 23
 Proposed Curriculum for Semester-III to VIII

SEMESTER –III
Sl. Course Contact
No. Code Course Title Category Periods L T P C

THEORY COURSES

1 22MA301 Mathematics III BSC 3 3 0 0 3

THEORY COURSES WITH LABORATORY COMPONENT

2 22EE301 Circuit Theory PCC 5 3 0 2 4

3 22EE302 Electrical Machines I PCC 5 3 0 2 4

Microcontroller and ARM

4 22EE303 PCC 4 2 0 2 3
Processor

5 22EE304 Digital Electronics PCC 5 3 0 2 4

6 22EE305 Analog Electronics PCC 5 3 0 2 4

LABORATORY COURSES

7 Communication Lab HSMC 4 0 0 4 2

8 22ME311 Product Development Lab- 3 EEC 2 0 0 2 1

9 Aptitude and Coding Skills I EEC 2 0 0 2 1

Internship/Seminar EEC 1

AUDIT COURSES

Value Education (Non

AC 0
Credit)

TOTAL 35 17 0 18 27
 SEMESTER –IV
Sl. Course Contact
Course Title Category L T P C
No. Code Periods
THEORY COURSES

1 UHV II HSMC 3 3 0 0 3

2 Professional Elective I PEC 3 3 0 0 3

THEORY COURSES WITH LABORATORY COMPONENT

3 22EE401 Operating Systems ESC 4 2 0 2 3

4 22EE402 Transmission and Distribution PCC 4 2 0 2 3

5 22EE403 Electrical Machines II PCC 5 3 0 2 4

6 22EE404 Control System Engineering PCC 5 3 0 2 4

7 22EE405 Microprocessors PCC 4 2 0 2 3

8 Open Elective I OEE 3 3 0 0 3

LABORATORY COURSES

9 Aptitude and Coding Skills II EEC 2 0 0 2 1

10 22ME411 Product Development Lab- 4 EEC 2 0 0 2 1

AUDIT COURSES

Yoga / Personality AC 0

TOTAL 35 21 0 14 28
 SEMESTER –V
Sl. Course Contact
Course Title Category L T P C
No. Code Periods
THEORY COURSES

1 Digital Signal Processing PCC 4 4 0 0 4

2 Professional Elective II PEC 3 3 0 0 3

3 Professional Elective III PEC 3 3 0 0 3

4 Honors I* 3 3 0 0 3

5 Honors II* 3 3 0 0 3

THEORY COURSES WITH LABORATORY COMPONENT

6 22EE501 Fundamentals of Networking ESC 4 2 0 2 3

7 22EE503 Power System Analysis PCC 5 3 0 2 4

8 22EE504 Embedded Systems and IoT PCC 5 3 0 2 4

LABORATORY COURSES

Advanced Aptitude and

9 EEC 2 0 0 2 1
Coding Skills I

22EE511 Internship / Seminar** EEC 1

MANDATORY COURSES

Indian Constitution
10 (Non Credit) MC 0

*Honors TOTAL 26 18
0 8
23
+6* +6* +6*
 SEMESTER –VI
Sl. Course Contact
Course Title Category L T P C
No. Code Periods
THEORY COURSES

1 Management Elective HSMC 3 3 0 0 3

2 Professional Ethics HSMC 2 2 0 0 2

3 Professional Elective IV PEC 3 3 0 0 3

4 Professional Elective V PEC 3 3 0 0 3

5 Professional Elective VI PEC 3 3 0 0 3

6 Open Elective II OEC 3 3 0 0 3

7 Honors III* 3 3 0 0 3

THEORY COURSES WITH LABORATORY COMPONENT

Power System Protection and

8 22EE601 PCC 4 2 0 2 3
Control

9 22EE602 Power Electronics PCC 5 3 0 2 4

LABORATORY COURSES

Advanced Aptitude and

10 EEC 2 0 0 2 1
Coding Skills II
28 22+ 25+
*Honors TOTAL 0 6
+3* 3* 3*
 SEMESTER – VII
Sl. Course Contact
Course Title Category L T P C
No. Code Periods
THEORY COURSES

1 Honors IV* 3 3 0 0 3

2 Honors V* 3 3 0 0 3

LABORATORY COURSES

3 22EE711 Project Work - Phase I EEC 4 0 0 4 2

4 Honors VI* -Project 6 0 0 6 3

MANDATORY COURSES
Essence of Indian
5 Knowledge Tradition MC 0
(Non Credit)
*Honours 4 4 2
6* 0
TOTAL +12* +6* +9*

SEMESTER – VIII
Sl. Course Contact
Course Title Category L T P C
No. Code Periods
LABORATORY COURSES

1 20EE811 Project Work Phase-II EEC 16 0 0 16 8

TOTAL 16 0 0 16 8
 PROFESSIONAL ELECTIVES / HONORS

1 2 3 4 5 6

EMBEDDED
SYSTEM Theory of
AI Based Automotive Linux Kernel Project
Automata & Linux System
(HCL TECH- System Embedded and Device
Compiler Programming
Knowledge Design Systems Drivers
Design
partner)

DC Micro Hybrid Micro Micro grid

AC Micro
SMART GRID grid and grid IoT for Smart Project
grid and Dynamics and
TECHNOLOGY its and its Systems
its controllers Control
controllers. controllers.

Electric Drives Energy Storage Modeling and

ELECTRIC Fundamentals Project
EV and Controller and Battery simulation
VEHICLE of Electric
Architecture for Electric Management Electric
TECHNOLOGY Vehicle
Vehicle System Vehicle

Robotics System Fiber Optics

Advanced
CONTROL AND Biomedical Virtual Identification and Laser
Control And
AUTOMATION Instrumentation Instrumentation and Adaptive Instrumentati
Systems Automation Control on

Power
POWER Power Electronics
Special Electric
ELECTRONICS Analysis of Analysis of Converters for for
Electrical Drives and
Rectifiers Inverters Electric Renewable
AND DRIVES Machines Control
Vehicles Energy
Sources

Design, Grid
Modeling and Integrating
RENEWABLE
Wind Energy Solar Energy Restructured Hybrid Energy Fabrication of
ENERGY Techniques
Systems Systems Power System Technology Renewable
TECHNOLOGY and
Energy System
Components Challenges
 Credit Summary

S. Subject Credits Per Semester Credit

Percentage
No. Area I II III IV V VI VII VIII Total

1 HSMC 3 - 2 3 - 5 - - 13 8
2 BSC 8 8 3 - - - - - 19 12
3 ESC 12 14 - 3 3 - - - 32 20
4 PCC - - 19 14 12 7 - - 52 33
5 PEC - - - 3 6 9 - 18 11
6 OEC - - - 3 - 3 - - 6 4
7 EEC 1 1 3 2 2 1 2 8 20 12
8 MC/AC √ √ √ √ √ - √ - -
Total 24 23 27 28 23 25 2 8 160 100
Honors
6 3 9 18
Credits

HSMC - Humanities and Social Sciences including Management Course; BSC – Basic Science
Course; ESC – Engineering Science Course; PCC – Professional Core Course; PEC –
Professional Elective Course; OEC – Open Elective Course; EEC – Employability
Enhancement Course; MC – Mandatory Course; AC – Audit Course.
 SYLLABUS: SEMESTER – I
Theory Courses with Laboratory Component:
MATRICES AND CALCULUS L T P C
22MA101
(Common to all Branches except CSBS) 3 0 2 5
OBJECTIVES:
The Course will enable learners to:
 Explain the concepts of matrix algebra techniques needed for practical applications.
 Determine the curvature of the curves.
 Illustrate the simple applications of multivariable calculus and vector calculus.
 Elaborate the concept and application of multiple integrals.
UNIT I MATRICES 15
Eigenvalues and Eigenvectors of a real matrix – Properties of Eigenvalues and Eigenvectors –
Statement and applications of Cayley-Hamilton Theorem – Diagonalization of matrices by
orthogonal transformation – Reduction of a quadratic form to canonical form by orthogonal
transformation – Nature of quadratic forms.
Experiments using SCILAB:
1. Introduction to SCILAB through matrices and general syntax.
2. Finding the Eigenvalues and Eigenvectors.
3. Plotting the graph of a quadratic form.
UNIT II SINGLE VARIABLE CALCULUS 15
Curvature in Cartesian and Polar Co-ordinates – Centre and radius of curvature – Circle of
curvature–Evolutes.
Experiments using SCILAB:
1. Evaluating the radius of curvature.
2. Finding the coordinates of the center of curvature.
3. Tracing of Curves.
UNIT III MULTI VARIABLE CALCULUS 15
Partial derivatives (excluding Euler’s theorem) – Total derivative – Differentiation of implicit
functions – Jacobian and properties – Taylor’s series for functions of two variables – Maxima and
minima of functions of two variables.
Experiments using SCILAB:
1. Evaluating the maxima of functions of several variables.
2. Evaluating the minima of functions of several variables.
3. Evaluation of Jacobians
UNIT IV MULTIPLE INTEGRALS 15
Double integrals – Change of order of integration – Area enclosed by plane curves – Triple
integrals – Volume of solids.
Experiments using SCILAB:
1. Evaluating area under a curve.
2. Evaluating area using double integral.
3. Evaluation of volume by integrals.
UNIT V VECTOR CALCULUS 15
Gradient, divergence and curl (excluding vector identities) – Directional derivative – Irrotational
and Solenoidal vector fields – Vector integration – Green’s theorem in a plane and Gauss
divergence theorem (Statement only) – Simple applications involving cubes and rectangular
parallelopipeds.
Experiments using SCILAB:
1. Evaluating gradient.
2. Evaluating directional derivative.
3. Evaluating divergent and curl.\
TOTAL: 75 PERIODS
 OUTCOMES:
Upon completion of the course, the students will be able to:
CO1: Use the matrix algebra methods to diagonalize the matrix.
CO2: Determine the evolute of the curve
CO3: Apply differential calculus ideas on the function of several variables
CO4: Evaluate the area and volume by applying the concept of multiple integration.
CO5: Utilize the concept of vector calculus in evaluating integrals.
TEXT BOOKS:
1. Erwin Kreyszig, “Advanced Engineering Mathematics”, John Wiley and Sons, 10th
Edition, New Delhi, 2016.
2. B.S. Grewal, “Higher Engineering Mathematics”, Khanna Publishers, New Delhi, 43rd
Edition, 2014.

REFERENCES:
1. M. K. Venkataraman, “Engineering Mathematics”, Volume I, 4th Edition, The National
Publication Company, Chennai, 2003Author, Title, Publisher, Edition, Year
2. Sivaramakrishna Dass, C. Vijayakumari, “Engineering Mathematics”, Pearson Education
India, 4th Edition, 2019.
3. H. K. Dass, and Er. Rajnish Verma, “Higher Engineering Mathematics”, S. Chand Private
Limited, 3rd Edition, 2014.
4. B. V. Ramana, “Higher Engineering Mathematics”, Tata McGraw Hill Publishing
Company, 6th Edition, New Delhi, 2008.
5. S. S. Sastry, “Engineering Mathematics”, Vol. I & II, PHI Learning Private Limited, 4 th
Edition, New Delhi, 2014.
6. James Stewart, “Calculus: Early Transcendentals”, Cengage Learning, 7th Edition, New
Delhi, 2015.
LIST OF EQUIPMENTS:
1. SCILAB : Open Source.

PHYSICS FOR ELECTRONICS ENGINEERING L T P C

22PH102 (For First Year B.E. –Electrical and Electronics Engineering and
Electronics and Communication Engineering) 3 0 2 4

OBJECTIVES:
The course will enable the learners to:
Educate the fundamental important concepts in Physics and to apply the knowledge in
solving scientific and Engineering problems. Impart the basic concepts of light propagation in
waveguides, conducting materials, semiconducting materials, opto and nano electronic devices and
photovoltaic technology
UNIT I LASER AND FIBRE OPTICS 15
Population of energy levels – Einstein’s A and B coefficients derivation - Resonant cavity -
Optical amplification (qualitative) - Semiconductor lasers: homojunction and heterojunction-
Engineering applications of lasers in data storage (qualitative).

Fibre optics: Principle and propagation of light through optical fibre - V-number - Types of optical
fibres (Material, refractive index and mode) - Losses in optical fibre - Fibre optic communication -
Fibre optic sensors (pressure and displacement).
 1. Determination of divergence of laser beam
2. Determination of acceptance angle and numerical aperture of an optical fibre
UNIT II ELECTRON THEORIES OF MATERIALS
15
Introduction to Classical, Quantum and Zone theories - Classical free electron theory - Expressions
for electrical conductivity and thermal conductivity - Wiedemann-Franz law - Success and failures
of CFT- Effect of temperature on Fermi function- Density of energy states and average energy of
electron at 0 K - Energy bands in solids.
1. Determination of thermal conductivity of a bad conductor by Lee’s disc method.
2. Measurement of the internal resistance using potentiometer.

UNIT III SEMICONDUCTING MATERIALS 15

Intrinsic Semiconductors – E-k diagram -Direct and indirect band gap semiconductors - Carrier
concentration in intrinsic semiconductors- Band gap determination-Extrinsic semiconductors -
Carrier concentration in n-type and p-type semiconductors -Electrical conductivity of intrinsic and
extrinsic semiconductors -Variation of Fermi level with temperature and impurity concentration -
Hall effect and its applications.

1. Bandgap determination of intrinsic semiconductor.

2. Determination of wavelength of semiconductor laser

15
UNIT IV OPTO AND NANO ELECTRONIC DEVICES
Carrier generation and recombination processes in semiconductors (concepts only) –LED-Organic
LED- Photodetectors– Electron density in bulk material (qualitative) -Size dependence of Fermi
energy- Band gap of nanomaterial -Quantum confinement-Quantum Structures-Density of states in
quantum well, quantum wire and quantum dot structures - Quantum dot lasers.
1. Synthesis of nanoparticles by sol-gel method
2. Determination of particle size using laser source
3. Determination of bandgap of an LED

UNIT V PHOTOVOLTAICS 15
Photovoltaic effect- Solar Cell-Parameters of Solar Cells -Solar Cell Technology -Effect of
Conversion Efficiency-Input Light- Solar Cell Area, Angle of Light Falling on Solar Cell-Solar
Cell Operating Temperature, photovoltaic thermal collectors, organic solar cells-dye sensitized
solar cell.
1. Solar cell characteristics

TOTAL: 75 PERIODS
OUTCOMES:
On completion of this course, the students will be able to:
CO1: Discuss the basic principles of working of laser and their applications in fibre optic
communication
CO2: Summarize the classical and quantum electron theories and energy band structures
CO3: Describe the conductivity in intrinsic and extrinsic semiconductors and importance of Hall
effect measurements
CO4: Associate the properties of nanoscale materials and their applications in quantum computing
CO5: Explain the concepts of photovoltaic technology and its applications.

TEXTBOOKS:
1. M.N. Avadhanulu and P.G. Kshirsagar, A text book of Engineering Physics, S. Chand
and Company, New Delhi, 2014.
2. Kasap, S.O. Principles of Electronic Materials and Devices, McGraw-Hill Education,
2007.
 3. Wahab, M.A. Solid State Physics: Structure and Properties of Materials‖. Narosa
Publishing House, 2009.
4. Nelson, J, The physics of Solar Cells, Imperial College Press, 2003.
5. Jui Sheng Hsieh, Solar Energy Engineering, Prentice Hall, 2007.

REFERENCES:

1. R.K. Gaur and S.L. Gupta, Engineering Physics, Dhanpat Rai Publications (P) Ltd., Eighth Edition
New Delhi, 2001.
2. Hanson, G.W., Fundamentals of Nanoelectronics, Pearson Education, 2009
3. R. A. Serway and J.W. Jewett, Physics for Scientists and Engineers, Ninth Edition.
Cengage Learning, 2014.
4. Rogers, B., Adams, J. & Pennathur, S. Nanotechnology: Understanding Small Systems‖.
CRC Press, 2014
5. A. Marikani, Materials Science, PHI Learning Private Limited, Eastern Economy Edition,
2017.
6. R. Wolfson, Essential University Physics, Volume 1 and 2 with Mastering Physics, Global
Edition, 3rd Edition, Pearson 2017.
7. B.K. Pandey and S. Chaturvedi, Engineering Physics, Cengage Learning India, 2012.
8. J. Singh, Semiconductor Optoelectronics: Physics and Technology, McGraw-Hill Inc., 1995.
9. Garg, H.P., Treatise on Solar Energy, John Wiley & Sons, 2006.

LIST OF EQUIPMENTS:
1. Semiconductor Laser
2. Determination of optical fibre parameters
3. Lee’s disc apparatus
4. Potentiometer
5. Bandgap determination set up
6. Synthesis of Nanoparticles
7. Bandgap of an LED
8. Solar cell characteristics

PROBLEM SOLVING USING C++ L T P C

22CS101
(Common to All Branches) 3 0 2 4
OBJECTIVES:
The Course will enable learners to:
 To learn problem solving and programming fundamentals.
 To gain knowledge on pointers and functions.
 To apply the principles of object orientated programming.
 To understand operator overloading, inheritance and polymorphism.
 To use the functionalities of I/O operations, files build C++ programs using exceptions.
UNIT I PROBLEM SOLVING AND PROGRAMMING FUNDAMENTALS 15
Computational thinking for Problem solving – Algorithmic thinking for Problem solving -
Building Blocks - Problem Solving and Decomposition - Dealing with Error – Evaluation.

Overview of C – Data types – Identifiers – Variables – Storage Class Specifiers – Constants –

Operators - Expressions – Statements – Arrays and Strings – Single-Dimensional – Two-
Dimensional Arrays – Arrays of Strings – Multidimensional Arrays.
List of Exercise/Experiments:
1. Write C/C++ programs for the following:
a. Find the sum of individual digits of a positive integer.
b. Compute the GCD of two numbers.
c. Find the roots of a number (Newton‘s method)
2. Write C/C++ programs using arrays:
a. Find the maximum of an array of numbers.
b. Remove duplicates from an array of numbers.
c. Print the numbers in an array after removing even numbers.
3. Write C/C++ programs using strings:
a. Checking for palindrome.
b. Count the occurrences of each character in a given word.

UNIT II POINTERS AND FUNCTIONS 15

Pointers -Variables – Operators – Expressions – Pointers and Arrays – Functions - Scope Rules –
Function Arguments – return Statement – Recursion – Structures – Unions – Enumerations.

List of Exercise/Experiments:
1. Generate salary slip of employees using structures and pointers. Create a structure
Employee with the following members:
EID, Ename, Designation, DOB, DOJ, Basicpay
Note that DOB and DOJ should be implemented using structure within structure.
2. Compute internal marks of students for five different subjects using structures and
functions.

UNIT III CLASSES AND OBJECTS 15

Concepts of Object Oriented Programming – Benefits of OOP – Simple C++ program - Classes
and Objects - Member functions - Nesting of member functions - Private member functions -
Memory Allocation for Objects - Static Data Members - Static Member functions - Array of
Objects - Objects as function arguments - Returning objects - friend functions – Const Member
functions - Constructors – Destructors.

List of Exercise/Experiments:
1. Write a program Illustrating Class Declarations, Definition, and Accessing Class
Members.
2. Program to illustrate default constructor, parameterized constructor and copy constructors.

OPERATOR OVERLOADING, INHERITANCE AND 15

UNIT IV
POLYMORPHISM
Operator Overloading - Overloading Using Friend functions – Inheritance – Types of inheritance
– Virtual Base Class - Abstract Class – Constructors in Derived Classes - member class: nesting
of classes.
Pointer to objects – this pointer- Pointer to derived Class - Virtual functions – Pure Virtual
Functions – Polymorphism.

List of Exercise/Experiments:
1. Write a Program to Demonstrate the i) Operator Overloading. ii) Function Overloading.
2. Write a Program to Demonstrate Friend Function and Friend Class.
3. Program to demonstrate inline functions.
4. Program for Overriding of member functions.
5. Write C++ programs that illustrate how the following forms of inheritance are supported:
 a) Single inheritance b) Multiple inheritance c)Multi level inheritance d)Hierarchical
inheritance.

UNIT V I/O, FILES AND EXCEPTIONS 15

C++ Streams – Unformatted I/O - Formatted Console I/O – Opening and Closing File – File
modes - File pointers and their manipulations – Templates – Class Templates – Function
Templates - Exception handling.

List of Exercise/Experiments:
1. Program to demonstrate pure virtual function implementation.
2. Count the number of account holders whose balance is less than the minimum balance
using sequential access file.
3. Write a Program to Demonstrate the Catching of all Exceptions.
4. Mini project.

TOTAL: 45+30 = 75 PERIODS

OUTCOMES:
At the end of this course, the students will be able to:
CO1: Solve problems using basic constructs in C.
CO2: Implement C programs using pointers and functions.
CO3: Apply object-oriented concepts and solve real world problems.
CO4: Develop C++ programs using operator overloading and polymorphism.
CO5: Implement C++ programs using Files and exceptions.

TEXT BOOKS:
1. Herbert Schildt, “The Complete Reference C++”, 4th edition, MH, 2015.
2. E Balagurusamy,”Object Oriented Programming with C++”, 4th Edition, Tata McGraw-
Hill Education, 2008.

REFERENCES:
1. Karl Beecher,”Computational Thinking: A beginner's guide to problem-solving and
programming”, BCS Learning & Development Ltd, 2017. (Unit 1)
2. Nell Dale, Chip Weems, “Programming and Problem Solving with C++”, 5th Edition,
Jones and Barklett Publishers, 2010.
3. John Hubbard, “Schaum's Outline of Programming with C++”, MH, 2016.
4. Yashavant P. Kanetkar, “Let us C++”, BPB Publications, 2020
5. ISRD Group, “Introduction to Object-oriented Programming and C++”, Tata McGraw-
Hill Publishing Company Ltd., 2007.
6. D. S. Malik, “C++ Programming: From Problem Analysis to Program Design”, Third
Edition, Thomson Course Technology, 2007.
7. https://infyspringboard.onwingspan.com/web/en/app/toc/
lex_auth_01297200240671948837_shared/overview

LIST OF EQUIPMENTS:
1. Standalone desktops with C/C++ compiler (or) Server with C/C++ compiler.
 SOFTWARE DEVELOPMENT PRACTICES L T P C
22CS102
(Common to All Branches) 3 0 2 4
OBJECTIVES:
The Course will enable learners to:
 To discuss the essence of agile development methods.
 To set up and create a GitHub repository.
 To create interactive websites using HTML
 To design interactive websites using CSS.
 To develop dynamic web page using Java script.

UNIT I AGILE SOFTWARE DEVELOPMENT AND Git and GitHub 15

Software Engineering Practices – Waterfall Model - Agility – Agile Process – Extreme Programming -
Agile Process Models – Adaptive Software Development – Scrum – Dynamic Systems Development
Method – Crystal – Feature Driven Development – Lean Software Development – Agile Modeling –
Agile Unified Process – Tool set for Agile Process.
Introduction to Git –Setting up a Git Repository - Recording Changes to the Repository - Viewing the
Commit History - Undoing Things - Working with Remotes -Tagging - Git Aliases - Git Branching -
Branches in a Nutshell - Basic Branching and Merging - Branch Management - Branching Workflows -
Remote Branches - Rebasing.
Introduction to GitHub – Set up and Configuration - Contribution to Projects, Maintaining a Project –
Scripting GitHub.

List of Exercise/Experiments:
1. Form a Team, Decide on a project:
a) Create a repository in GitHub for the team.
b) Choose and follow a Git workflow
 Each team member can create a StudentName.txt file with contents about themselves
and the team project
 Each team member can create a branch, commit the file with a proper commit
message and push the branch to remote GitHub repository.
 Team members can now create a Pull request to merge the branch to master branch
or main development branch.
 The Pull request can have two reviewers, one peer team member and one faculty.
Reviewers can give at least one comment for Pull Request updating.
 Once pull request is reviewed and merged, the master or main development branch
will have files created by all team members.
2. Create a web page with at least three links to different web pages. Each of the web pages is to be
designed by a team member. Follow Git workflow, pull request and peer reviews.
3. Form a Team, Decide on a project:
c) Create a repository in GitHub for the team.
d) Choose and follow a Git workflow
 Each team member can create a StudentName.txt file with contents about
themselves and the team project
 Each team member can create a branch, commit the file with a proper commit
message and push the branch to remote GitHub repository.
 Team members can now create a Pull request to merge the branch to master branch
or main development branch.
 The Pull request can have two reviewers, one peer team member and one faculty.
Reviewers can give at least one comment for Pull Request updation.
 Once pull request is reviewed and merged, the master or main development branch
will have files created by all team members.
4. Create a web page with at least three links to different web pages. Each of the web pages is to be
designed by a team member. Follow Git workflow, pull request and peer reviews.
UNIT II HTML 15
Introduction – Web Basics – Multitier Application Architecture – Cline-Side Scripting versus Server-
side Scripting – HTML5 – Headings – Linking – Images – Special Characters and Horizontal Rules –
Lists – Tables – Forms – Internal Linking – meta Elements – Form input Types – input and datalist
Elements – Page-Structure Elements.
List of Exercise/Experiments:
1. Create web pages using the following:
 Tables and Lists
 Image map
 Forms and Form elements
 Frames
UNIT III CSS 15
Inline Styles – Embedded Style Sheets – Conflicting Styles – Linking External Style Sheets –
Positioning Elements – Backgrounds – Element Dimensions – Box Model and Text Flow – Media
Types and Media Queries – Drop-Down Menus – Text Shadows – Rounded Corners – Colour – Box
Shadows – Linear Gradients – Radial Gradients – Multiple Background Images – Image Borders –
Animations – Transitions and Transformations – Flexible Box Layout Module – Multicolumn Layout.
List of Exercise / Experiments:
1. Apply Cascading style sheets for the web pages created.
UNIT IV JAVASCRIPT BASICS 15
Introduction to Scripting – Obtaining user input – Memory Concepts – Arithmetic – Decision Making:
Equality and Relational Operators – JavaScript Control Statements – Functions – Program Modules –
Programmer-defined functions – Scope rules – functions – Recursion – Arrays – Declaring and
Allocating Arrays – References and Reference Parameters – Passing Arrays to Functions –
Multidimensional arrays.
List of Exercise/Experiments:
1. Form Validation (Date, Email, User name, Password and Number validation) using
JavaScript.
UNIT V JAVASCRIPT OBJECTS 15
Objects – Math, String, and Date, Boolean and Number, document Object – Using JSON to Represent
objects – DOM: Objects and Collections – Event Handling.

List of Exercise/Experiments:
1. Implement Event Handling in the web pages.
Mini Projects-Develop any one of the following web applications (not limited to one) using above
technologies.
a. Online assessment system
b. Ticket reservation system
c. Online shopping
d. Student management system
e. Student result management system
f. Library management
g. Hospital management
h. Attendance management system
i. Examination automation system
j. Web based chat application
TOTAL: 75 PERIODS
OUTCOMES:
At the end of this course, the students will be able to:
CO1: Apply agile development methods in software development practices.
CO2: Set up and create a GitHub repository.
CO3: Develop static and dynamic webpages using HTML.
CO4: Design interactive personal or professional webpages using CSS.
CO5: Develop web pages using Java script with event-handling mechanism.
TEXT BOOKS:
1. Roger S. Pressman, “Software Engineering: A Practitioner‘s Approach”, McGraw Hill
International Edition, Nineth Edition, 2020.
2. Scott Chacon, Ben Straub, “Pro GIT”, Apress Publisher, 3rd Edition, 2014.
3. Deitel and Deitel and Nieto, “Internet and World Wide Web - How to Program”, Pearson, 5th
Edition, 2018.
REFERENCES:
1. Roman Pichler, “Agile Product Management with Scrum Creating Products that Customers
Love”, Pearson Education, 1 st Edition, 2010.
2. Jeffrey C and Jackson, “Web Technologies A Computer Science Perspective”, Pearson
Education, 2011.
3. Stephen Wynkoop and John Burke, “Running a Perfect Website”, QUE, 2nd Edition, 1999.
4. Chris Bates, “Web Programming – Building Intranet Applications”, 3rd Edition, Wiley
Publications, 2009.
5. Gopalan N.P. and Akilandeswari J., “Web Technology”, Second Edition, Prentice Hall of India,
2014.
6. https://infyspringboard.onwingspan.com/web/en/app/toc/
lex_auth_013382690411003904735_shared/overview
7. https://infyspringboard.onwingspan.com/web/en/app/
toc/lex_auth_0130944214274703362099_shared/overview

LIST OF EQUIPMENTS:
Systems with either Netbeans or Eclipse
Java/JSP/ISP Webserver/Apache
Tomcat / MySQL / Dreamweaver or
Equivalent/ Eclipse, WAMP/XAMP

L T P C
22EE103 BASICS OF ELECTRICAL ENGINEERING
3 0 2 4
OBJECTIVES:
The Course will enable learners to:
 To understand basic circuits and domestic wiring
 To comprehend magnetic circuits
 To impart knowledge on the concepts of electromagnetics.
 To develop knowledge on working principle of measuring instruments.
• To study the structure of electric power generation and distribution systems.

UNIT I BASIC CIRCUITS AND DOMESTIC WIRING 15

Electrical circuit elements (R, L and C)- Ohm’s Law Kirchhoff’s laws - phasors – RMS-average
values-sinusoidal steady state response of simple RLC circuits. types of wiring system and
wiring accessories, domestic wiring, specification of wires, earthing, need and methods,
protective devices, fuses and circuit breakers, energy tariff calculation for domestic loads.
List of Exercise/Experiments:
1. Draw and demonstrate the layout for a residential house wiring using energy meter,
switches, fuse, indicator, LED lamp, fluorescent lamp with one of the lamps controlled
by 2 different switches.
2. Study of various power tools and troubleshooting of electric iron and fan.

UNIT II MAGNETIC CIRCUITS (Qualitative) 15

Magnetic materials-properties, magnetic field - H, B - Ampere's law, Biot Savart’s law, toroidal
core: flux density, flux linkage - magnetic circuit with air gap - reluctance in series and parallel
circuits- self and mutual inductance.

List of Exercise/Experiments:
1. Simulation of B-H characteristics.
2. Study of magnetic field in current carrying coil.
UNIT III ELECTROMAGNETICS (Qualitative) 15
Electromagnetic field –E, D, general wave equations, wave parameters, Poynting theorem and
Poynting vector, series and parallel magnetic circuits, singly excited and doubly excited circuits.
List of Exercise/Experiments:
1. Study of magnetic field distribution in electrical machines.
2. Study of open circuit characteristics of DC generator

UNIT IV MEASUREMENTS AND INSTRUMENTATION (Qualitative) 15

Characteristics and errors in measurement, standards and calibration, importance of digital
instruments, torque in indicating instruments moving coil and moving iron meters, induction
type energy meter and dynamometer wattmeter, transducers- thermocouple, RTD, strain gauge,
LVDT, LDR and piezoelectric, CRO, elements of data acquisition system, smart sensors,
applications like smart street light, traffic monitoring and control.

List of Exercise/Experiments:
1. Study of dynamics of sensors/ transducers: (a) Temperature (b) Pressure (c)
Displacement (d) Optical (e) Strain (f) Flow
2. Study of CRO and measurement of RMS voltage, frequency and power factor.

UNIT V BASICS OF POWER SYSTEM (Qualitative) 15

Power generation systems, thermal, hydro, nuclear, wind and solar: construction and working
principle, structure of power system, overhead and underground systems, introduction to
EHVAC, HVDC transmission and FACTS.

List of Exercise/Experiments:
1. Study of power generation in wind energy system.
2. Study and measurement of power in solar power system
TOTAL: 75 PERIODS
OUTCOMES:
At the end of this course, the students will be able to:
CO1: Apply the knowledge of basic circuits and domestic wiring
CO2: Understand magnetic circuits and its parameters
CO3: Apply the laws governing electromagnetic and wave equations
CO4: Describe the working principle of measuring instruments
CO5: Understand the power generation systems
CO6: Understand the structure of power system and various distribution systems
TEXT BOOKS:
1. William H. Hayt Jr, Jack E. Kemmerly and Steven M. Durbin, “Engineering
Circuits Analysis”, McGraw Hill publishers, edition, New Delhi, 2019.
2. J. B. Gupta, ‘A Course in Electronic and Electrical Measurements’, S. K. Kataria&
Sons, Delhi, 2016.
3. C.L.Wadhwa, ‘Electrical Power Systems’,New Academic Science Ltd, sixth edition
2016.

REFERENCES:
1. Chakrabarti A, “Circuits Theory (Analysis and synthesis), Dhanpath Rai & Sons,
New Delhi, seventh edition, 2017.
2. Joseph A. Edminister, Mahmood Nahri, “Electric circuits”, Schaum’s series,
McGraw- Hill, New Delhi, 2010.
3. I. J. Nagrath and D. P. Kothari, “Electric Machines”, McGraw Hill Education, 5th
Edition, 2017.
4. A.K. Sawhney, PuneetSawhney ‘A Course in Electrical & Electronic Measurements
& Instrumentation’, Dhanpat Rai and Co, New Delhi, 2019.
5. V K Mehta,” Principles of power system”, S .Chand and company limited.5th
Edition 2018.
6. The Electrical Engineering Handbook, Richard C. Dorf, CRC / IEEE, 1997.
7. Power Engineer’s Handbook, TNEBEA, sixth edition, 2011.

LIST OF EQUIPMENTS:
S. No Name of the Equipment Range Quantity
1 Single Phase Energy Meter 230 V/30A 2
2 DC Ammeters 0-5/10 2
3 DC Ammeters 0-1/2 2
4 DC Voltmeter 0-220 V 2
5 Regulated Power Supply 0-30 V 5
6 Function Generator 0-10 A MI 2
7 PV Panels 100W 24V 1
8 Micro Wind Energy Generator Module - 1
9 Cathode Ray Oscilloscope 30Mhz 2
10 Electric Heater - 1
11 Thermometer - 1
12 Thermistor RTD - 1
13 30 Psi Pressure Chamber with Air Foot Pump - 1
14 LVDT - 1
15 Optical Sensor - 1
16 Strain Gauge Kit - 1
17 100 Gm Weights - 10
18 Flow Measurement Trainer Kit - 1
19 Fan - 1
20 Iron Box - 1
21 Multimeter - 2
 L T P C
22HS101 PROFESSIONAL COMMUNICATION
2 0 2 3
OBJECTIVES:
The Course will enable learners to:
 Strengthen basic reading and writing skills.
 Comprehend listening contexts competently.
 Inculcate reading habit and develop effective reading skills.
 Improve active and passive vocabulary.
 Acquire speech clarity with right pronunciation.
 Develop vocabulary of a general kind and enhance grammatical accuracy.
 Imbibe Content and Language Integrated Learning (CLIL).
UNIT I FORMAL AND INFORMAL COMMUNICATION 12
Listening: Short Texts, Short Formal and Informal Conversations
Speaking: Self-Introduction, Exchanging Personal Information
Reading: Practice in Skimming, Scanning and Predicting, Reading Comprehension
Writing: Free Writing, Hints Development
Grammar: Parts of Speech, Prepositions.
Vocabulary: Compound Nouns, Technical Words.

List of Exercise/Experiments
1. Familiarization of Vowel Sounds-Monophthongs, Diphthongs and Consonant
Sounds
2. Listening to Formal Conversations in British and American Accents
3. Guided Writing

UNIT II GRAMMAR AND LANGUAGE DEVELOPMENT 12

Listening: Telephonic Conversations.
Speaking: Sharing information of a personal kind - Greetings – Taking leave.
Reading: Short comprehension passages - Pre-reading and Post-reading (multiple choice
questions, short questions / open and close ended questions)
Writing: Instructions, Recommendations, Checklists
Grammar: Tenses, Framing ‘Wh’ & ‘Yes’ or ‘No’ questions
Vocabulary: Numerical Adjectives, Collocations
List of Exercise/Experiments
1. Communication Etiquettes
2. Self -Introduction using SWOT Analysis
UNIT III BASIC TECHNICAL WRITING AND STUDY SKILLS 12
Listening: Listening to longer texts and filling up the tables
Speaking: Asking about routine actions and expressing opinions
Reading: Short texts (Cloze Test)
Writing: Formal letters, E-mail writing, Interpretation of Charts and Graphs
Grammar: Cause and Effect expressions, Conditional Clauses
Vocabulary: Often misspelled and confusing words

List of Exercise/Experiments
1. Mechanics of Reading Skills
2. News Reading–Cloze Tests
UNIT IV GROUP DISCUSSION AND JOB APPLICATIONS 12
Listening: Listening to recorded dialogues of conversations and completing exercises based
on them
Speaking: Discussion on Social issues.
Reading: Reading text from magazines
Writing: Purpose Expressions, Letter of Application, Minutes of Meeting.
Grammar: Modal Verbs, Subject-Verb agreement
Vocabulary : Sequence Words

List of Exercise/Experiments
1. Group Presentation, Group Discussion: Do’s and Don’ts of Group Discussion
2. Discussions on failure and success in interviews of famous personalities
3. Spotting Errors

UNIT V ART OF REPORTING 12

Listening: Listening to TED talks
Speaking: Debate & Presentations
Reading: Biographies
Writing: Definitions (Single line & Extended), Report Writing (Industrial visit, Accident and
Feasibility reports)
Grammar: Reported speech
Vocabulary : Verbal Analogies

List of Exercise/Experiments
1. Writing based on listening to academic lectures and discussions
2. Leadership skills, Negotiation skills
3. Mechanics of Report Writing

TOTAL: 60 PERIODS

OUTCOMES:
Upon completion of the course, the students will be able to:
CO1: Comprehend conversations and short talks delivered in English
CO2: Participate efficiently in informal conversations and develop an awareness of the self
and apply well-defined techniques
CO3: Read articles of a general kind in magazines and newspapers efficiently
CO4: Write short general essays, personal letters and E-mails in English
CO5: Develop vocabulary of a general kind by enriching reading skills

TEXT BOOKS:
1. Kumar, Suresh E, & Sreehari, P. Communicative English. Orient Black Swan,
2007.
2. Richards, Jack C. Interchange Students’ Book-2 New Delhi: CUP,2015
REFERENCES:
1. Bailey, Stephen. Academic Writing: A practical guide for students. New York:
Rutledge,2011.
2. Dhanavel, S P. English and Soft Skills, Volume Two, Orient Black Swan.
Author, Title, Publisher, Edition, Year
Laboratory Courses:
PRODUCT DEVELOPMENT LAB – 1 L T P C
22ME111
(Common to all Branches) 0 0 2 1
The students may be grouped into 3 to 4 and work under a project supervisor. The
device/system/component/prototype Idea to be developed by the students and a final
presentation to be done by the students about the idea generated at the end of the semester.

OBJECTIVES:
The Course will enable learners to:
 Understand the functionalities and limitation of various machine/equipment
 Demonstrate various operations that can be performed to machines
 Summarize the basic principles of machines to convert their ideas into products
LIST OF EXPERIMENTS:
I 1. Study of Manufacturing Processes (Carpentry, Plumbing, Machines and Welding).
2. Study of fundamental operations of 3D Printer and Scanner with Software.
3. Study of Smart Machining (CNC and Laser cutting) and Engraving
Techniques.
II 1. Study of Fundamental of Circuit Design.
2. Study of PCB Milling Machine.
3. Study of Soldering and Desoldering.
III 1. Study of Computer Peripheral Devices (Processing Information Devices)
IV 1. Present the Product Idea Presentation - Phase – I.
TOTAL: 30 PERIODS
Note:
The students can select the prototype to be made of their choice after learning the above
exercises.
OUTCOMES:
Upon completion of the course, the students will be able to:
CO1: Understand the concept of manufacturing processes.
CO2: Describe the working of the machine element.
CO3: Discuss the various applications of engineering materials.
CO4: Summarize the basics of core engineering concepts.
CO5: Describe the process for converting ideas into products.
LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS
S.No Equipment Name Quantity
1. CNC Router 1 No
2. 3D Printer 1 No
3. 3D Scanner 1 No
4. Laser cutting Machine 1 No
5. Centre lathe 2 Nos
6. Arc welding transformer with cables and holders 2 Nos
7. Plumbing tools 2 Sets
8. Carpentry tools 2 Sets
9. Multimeter 10 Nos
10. Drilling Machine 1 No
11. Solder Stations 5 Sets
12. Desoldering Machine 1 No
13. PCB Milling Machine 1 No
14. Variable Power Supply 1 No
Electronic Components like Resistors, Transistors, Diode, Inductor,
15. 10 Sets
Capacitor, etc.
16. Personal Desktop Computers 30 Nos
Mandatory Course:

ENVIRONMENTAL SCIENCE AND L T P C

22CH104 SUSTAINABILITY 2 0 0 MC
(Common to all the Branches)
OBJECTIVES:
The Course will enable learners to:
 To gain knowledge of the environment and various natural resources.
 To identify the Scientific and Technological solutions to pollution issues and
waste management.
 To understand the significance of the conservation of biodiversity.
 To recognize the needs and benefits of sustainability and its management.
 To comprehend the effects of human population on the environment.

UNIT I NATURAL RESOURCES 07

Definition, scope and importance of environment – need for public awareness. Introduction
to natural resources - Types - Forest resources: Use and over-exploitation, deforestation
and its impacts, Food resources: effects of modern agriculture, organic farming, Renewable
energy sources - Solar, Wind, Geothermal, Tidal, OTE and Biomass.
Field activity -Tree plantation

UNIT II POLLUTION AND WASTE MANAGEMENT 07

Pollution - Definition –causes, effects and control measures of (a) Air pollution (b) Water
pollution (c) Soil pollution (d) Noise pollution (e) Nuclear hazards - nuclear accidents and
holocaust - Role of an individual in prevention of pollution –Case studies.
Waste management- Municipal solid wastes, e- waste, plastic waste.
Field study – Solid waste management of the institution

UNIT III BIODIVERSITY AND ITS CONSERVATION 06

Biodiversity: types – values of biodiversity, India as a mega-diversity nation – hot-spots of
biodiversity – threats to biodiversity – endangered and endemic species, extinct, rare,
vulnerable species of India – conservation of biodiversity: In-situ and ex-situ method.
Field study – Biodiversity of the institution

UNIT IV SUSTAINABILITY AND MANAGEMENT 05

Sustainability-concept, needs and challenges- Circular economy - Sustainable

Development Goals- Concept of Carbon footprint, Environmental Impact Assessment,
Clean Development Mechanism, solutions.
Field study – Carbon footprint of the institution

UNIT V HUMAN POPULATION 05

Introduction - Population growth, variation among nations, population explosion,
Environment and human health – endemic/epidemic/pandemic – Role of information
technology in environment and human health.
Case Study – Pandemics of 21st century

TOTAL: 30 PERIODS
OUTCOMES:
Upon completion of the course, the students will be able to:
CO1: Investigate and use conservational practices to protect natural resources.
CO2: Identify the causes of pollutants and illustrate suitable methods for pollution
 abatement.
CO3: Adapt the values of biodiversity and its conservation methods.
CO4: Recognize suitable sustainable development practices and apply it in day-to-day
life.
CO5: Assess the impacts of human population and suggest suitable solutions.

TEXT BOOKS:

1. Anubha Kaushik and C.P. Kaushik, “Perspectives in environmental studies”, New

Age International Publishers,2nd edition, 2021.
2. Benny Joseph, Environmental Science and Engineering, Tata McGraw-Hill, New
Delhi, 1st edition, 2017.
3. Gilbert M. Masters, Introduction to Environmental Engineering and Science,
Pearson Education, 3rd edition, 2014.
4. Erach Bharuch, Textbook of Environmental Studies for Undergraduate Courses,
Universities Press(I) Pvt. Ltd., Hyderabad, 3rd Edition, 2021.

REFERENCES:
1. William P. Cunningham & Mary Ann Cunningham Environmental Science: A
Global Concern, McGraw Hill, 14th edition, 2017.
2. Rajagopalan, R, Environmental Studies-From Crisis to Cure, Oxford University
Press, 3rd edition, 2015.
3. G. Tyler Miller and Scott E. Spoolman, ―Environmental Science, Cengage
Learning India Pvt, Ltd., Delhi, 14th edition, 2014.
4. Allen, D. T. and Shonnard, D. R., Sustainability Engineering: Concepts, Design and
Case Studies, Prentice Hall, 1st edition, 2012.
5. Bradley. A.S; Adebayo, A.O., Maria, P. Engineering applications in sustainable
design and development, Cengage learning, 1st edition, 2015.
6. Environment Impact Assessment Guidelines, Notification of Government of India,
2006 and subsequent amendments, 2022
 SEMESTER – II
Theory Courses with Laboratory Component

Transforms and Numerical Methods L T P C

22MA201
(Common to All Branches except CSBS) 3 0 2 5
OBJECTIVES:
The Course will enable learners to:
 Introduce the concepts of Laplace transforms and Z-transforms.
 Illustrate the application of transforms in solving differential and difference
equations.
 Explain the Numerical methods for handling algebraic and transcendental
equations.
 Introduce the numerical techniques for interpolation, differentiation and
integration.

UNIT I LAPLACE TRANSFORMS 15

Laplace transforms – Sufficient condition for existence – Transform of elementary functions
– Basic properties – Transforms of derivatives and integrals of functions – Derivatives and
integrals of transforms –Transforms of unit step function and impulse functions – Transform
of periodic functions. Inverse Laplace transform – Convolution theorem (Statement only).
Experiments using SCILAB:
1. Finding Laplace transform of a function.
2. Finding inverse Laplace Transforms.
3. Determine the input for given output function of Laplace Transform.

UNIT II Z – TRANSFORMS 15
Z-transforms – Elementary properties – Inverse Z-transforms – partial fractions method –
residues method – Convolution theorem.

Experiments using SCILAB:

1. Finding Z –transform of a sequence.
2. Finding convolution of two sequences.
3. Plotting the input and output function of Z transform.

SOLUTION OF DIFFERENTIAL AND DIFFERENCE

UNIT III 15
EQUATIONS
Solution of linear ordinary differential equation of second order with constant coefficients
and first order simultaneous equations with constant coefficients using Laplace transform.
Formation of difference equations – Solution of first and second order difference equations
with constant coefficients using Z-transform.
Experiments using SCILAB:
1. Solving second order Ordinary Differential Equation.
2. Finding the Laplace transform and its inverse of a function numerically.
3. Finding the Z-transform numerically
SOLUTION OF EQUATIONS AND EIGENVALUE
UNIT IV 15
PROBLEMS
Solution of algebraic and transcendental equations by Newton Raphson method - Solution of
linear system of equations – Gauss elimination method – Gauss Jordan method – Gauss
Seidel Iterative method– Eigenvalues of a matrix by Power method.
Experiments using SCILAB:
1. Finding the real roots of algebraic and transcendental equations using Newton
Raphson method.
2. Finding the largest Eigenvalue by power method.
3. Solving system of linear equations using Gauss Seidel Method.

UNIT V NUMERICAL DIFFERENTIATION AND INTEGRATION 15

Finite differences – Forward and Backward differences – Interpolation – Newton’s forward
and backward interpolation formulae - Lagrange’s interpolation for unequal intervals -
Numerical Differentiation - Newton’s and Lagrange’s formulae - Numerical integration using
Trapezoidal and Simpson’s 1/3 rules – Evaluation of double integrals by Trapezoidal and
Simpson’s 1/3 rules.
Experiments using SCILAB:

1. Finding approximately the missing value using Lagrange interpolation.

2. Evaluating line integrals by trapezoidal rule.
3. Evaluating line integrals by Simpson’s rule.

TOTAL: 75 PERIODS

OUTCOMES:
Upon completion of the course, the students will be able to:
CO1: Determine Laplace transform and inverse transform of simple functions.
CO2: Determine Z-transform and inverse transform of simple functions.
CO3: Solve ordinary differential equations using Laplace transform and difference equation
using Z-transform.
CO4: Compute the solutions of algebraic, transcendental and the system of equations.
CO5: Appreciate the numerical techniques of interpolation in various intervals and apply
the numerical techniques of differentiation and integration for engineering problems.
TEXT BOOKS:
1. Bali N., Goyal M. and Watkins C., “Advanced Engineering Mathematics”, Firewall
Media (An imprint of Lakshmi Publications Pvt., Ltd.,), New Delhi, 7th Edition, 2009.
2. Grewal, B.S., and Grewal, J.S., “Numerical Methods in Engineering and Science”,
Khanna Publishers, 10th Edition, New Delhi, 2015.

REFERENCES:
1. Erwin. Kreyszig, “Advanced Engineering Mathematics”, John Wiley and Sons, 10th
Edition, New Delhi, 2016.
2. Jain R.K. and Iyengar S. R. K., “Advanced Engineering Mathematics”, Narosa
Publications, New Delhi, 3rd Edition, 2007.
3. Wylie, R.C. and Barrett, L.C., “Advanced Engineering Mathematics”, Tata McGraw
Hill Education Pvt. Ltd, 6th Edition, New Delhi, 2012.
4. Mathews, J.H. “Numerical Methods for Mathematics, Science and Engineering”, 2nd
Edition, Prentice Hall, 1992.
5. Sastry S.S, “Introductory Methods of Numerical Analysis”, PHI Learning Pvt. Ltd, 5 th
Edition, 2015.

LIST OF EQUIPMENTS:
1. SCILAB : Open Source
 DATA STRUCTURES L T P C
22CS201
(Common to CSE, CSD, EEE, ECE, IT and ADS) 3 0 2 4
OBJECTIVES:
The Course will enable learners to:
• To understand the concepts of List ADT.
• To learn linear data structures – stacks and queues ADTs.
• To understand and apply Tree data structures.
• To understand and apply Graph structures.
• To analyze sorting, searching and hashing algorithms.
UNIT I LINEAR DATA STRUCTURES – LIST 15
Algorithm analysis - running time calculations - Abstract Data Types (ADTs) – List ADT –
array-based implementation – linked list implementation – singly linked lists - circularly linked
lists - doubly-linked lists – applications of lists – Polynomial Manipulation – All operations
(Insertion, Deletion, Merge, Traversal).

List of Exercise/Experiments:
3. Array implementation of List, Stack and Queue ADTs.
4. Linked list implementation of List, Stack and Queue ADTs.
5. Applications of List – Polynomial manipulations
UNIT II LINEAR DATA STRUCTURES – STACKS, QUEUES 15
Stack ADT – Stack Model - Implementations: Array and Linked list - Applications - Balancing
symbols - Evaluating arithmetic expressions - Conversion of Infix to postfix expression - Queue
ADT – Queue Model - Implementations: Array and Linked list - applications of queues -
Priority Queues – Binary Heap – Applications of Priority Queues.

List of Exercise/Experiments:
3. Applications of Stack – Infix to postfix conversion and expression evaluation.
4. Implementation of Heaps using Priority Queues.
UNIT III NON-LINEAR DATA STRUCTURES – TREES 15
Tree ADT – tree traversals - Binary Tree ADT – expression trees – applications of trees – binary
search tree ADT– AVL Tree.

List of Exercise/Experiments:
3. Implementation of Binary Trees and operations of Binary Trees.
4. Implementation of Binary Search Trees.
UNIT IV NON-LINEAR DATA STRUCTURES - GRAPHS 15
Definition – Representation of Graph – Types of graph - Breadth-first traversal - Depth-first
traversal – Topological Sort – Applications of graphs – BiConnectivity – Euler circuits.

List of Exercise/Experiments:
3. Graph representation and Traversal algorithms.
UNIT V SEARCHING, SORTING AND HASHING TECHNIQUES 15
Searching- Linear Search - Binary Search - Sorting - Bubble sort - Selection sort - Insertion sort
– Hashing - Hash Functions – Separate Chaining – Open Addressing – Rehashing – Extendible
Hashing.

List of Exercise/Experiments:
1. Implement searching and sorting algorithms.
TOTAL: 75 PERIODS
OUTCOMES:
At the end of this course, the students will be able to:
CO1: Implement abstract data types for list.
CO2: Solve real world problems using appropriate linear data structures.
CO3: Apply appropriate tree data structures in problem solving.
CO4: Implement appropriate Graph representations and solve real-world applications.
CO5: Implement various searching and sorting algorithms.
TEXT BOOKS:
1. Mark Allen Weiss, “Data Structures and Algorithm Analysis in C++”, 4th Edition,
Pearson Education, 2014.
2. Sartaj Sahni, “Data Structures, Algorithms and Applications in C++”, Silicon paper
publications, 2004.
REFERENCES:
1. Rajesh K. Shukla, “Data Structures using C and C++”, Wiley India Publications, 2009.
2. Narasimha Karumanchi, “Data Structure and Algorithmic Thinking with Python: Data
Structure and Algorithmic Puzzles”, CareerMonk Publications, 2020.
3. Jean-Paul Tremblay and Paul Sorenson, “An Introduction to Data Structures with
Application”, McGraw-Hill, 2017.
4. Mark Allen Weiss, “Data Structures and Algorithm Analysis in Java”, Third Edition,
Pearson Education, 2012.
5. Ellis Horowitz, Sartaj Sahni, Susan Anderson-Freed, “Fundamentals of Data Structures
in C”, Second Edition, University Press, 2008.
6. Ellis Horowitz, Sartaj Sahni, Dinesh P Mehta, “Fundamentals of Data Structures in
C++”, Second Edition, Silicon Press, 2007.
7. https://infyspringboard.onwingspan.com/web/en/app/
toc/lex_auth_01350157816505139210584/overview
LIST OF EQUIPMENTS:
1. Standalone desktops with C/C++ compiler (or) Server with C/C++ compiler.

ENGINEERING CHEMISTRY L T P C
22CH101
(Common to all except CE, ME and CB) 3 0 2 4
OBJECTIVES:
The Course will enable learners to:
• To understand the water quality criteria and interpret its applications in water
purification.
• To gain insights into the basic concepts of electrochemistry and implement its
applications in chemical sensors.
• To acquire knowledge on the fundamental principle of energy storage devices and
relate it to electric vehicles.
• To identify the different types of smart materials and explore their applications in
Engineering and Technology.
• To assimilate the preparation, properties and applications of nanomaterials in various
fields.

UNIT I WATER TECHNOLOGY 15

Sources of water – Impurities - Drinking water quality parameters – Hardness and its types,
problems - Municipal water treatment and disinfection (chlorination - break-point chlorination,
UV, Ozonation). Boiler troubles - Scales and sludges, Boiler feed water: Requirements - Internal
treatment (phosphate, colloidal, sodium aluminate and Calgon conditioning). External treatment –
Ion exchange demineralization - Principle, process and fouling.
Desalination of brackish water: Reverse osmosis – principle -types of membranes, process and
fouling.

List of Experiments
1. Determination of total, temporary and permanent hardness of water by EDTA method.
2. Determination of chloride content of water sample by argentometric method.
3. Determination of alkalinity in water sample.
4. Estimation of iron content of the water sample using spectrophotometer (1,10-
phenanthroline/thiocyanate method)

UNIT II ELECTROCHEMISTRY AND SENSORS 15

Introduction- Conductance- factors affecting conductance – Electrodes – origin of electrode
potential – single electrode potential, standard electrode potential – measurement of single
electrode potential –over voltage - reference electrodes (standard hydrogen electrode, calomel
electrode)-ion selective electrode- glass electrode - Nernst equation (derivation), numerical
problems, Electrochemical series and its applications.
Chemical sensors – Principle of chemical sensors – Breath analyzer – Gas sensors – CO2
sensors- Sensor for health care – Glucose sensor.

List of Experiments
1. Determination of the amount of NaOH using a conductivity meter.
2. Determination of the amount of acids in a mixture using a conductivity meter.
3. Determination of the amount of given hydrochloric acid using a pH meter.

UNIT III ENERGY STORAGE DEVICES AND ENERGY SOURCES 15

Batteries – Primary alkaline battery - Secondary battery - Pb-acid battery, Fuel cell - H2 – O2
fuel cell.
Batteries used in E- vehicle: Ni-metal hydride battery, Li-ion Battery, Li-air Battery
Nuclear Energy – Nuclear fission, fusion, differences, characteristics – nuclear chain reactions –
light water nuclear reactor – breeder reactor.

List of Experiments
1. Determination of single electrode potential of the given electrode.
2. Estimation of the iron content of the given solution using a potentiometer.
3. Determination of electrochemical cell potential (using different electrodes/ different
concentrations of electrolytes)

UNIT IV SMART MATERIALS FOR ENGINEERING APPLICATIONS 15

Polymers – Definition – Classification – smart polymeric materials - Preparation, properties and
applications of Piezoelectric polymer - Polyvinylidene fluoride (PVDF), Electroactive polymer-
Polyaniline (PANI) and Biodegradable polymer - Polylactic acid (PLA).
Polymer composites: Definition, Classification – FRP’s – Kevlar.
Shape Memory Alloys: Introduction, Shape memory effect – Functional properties of SMAs –
Types of SMA - Nitinol (Ni-Ti) alloys - applications.
Chromogenic materials: Introduction – Types - applications.
List of Experiments
1. Determination of the molecular weight of polymer using Ostwald viscometer.
2. Application of polymeric fibers in 3D printing.

UNIT V NANOCHEMISTRY 15
Introduction – synthesis – top-down process (laser ablation, chemical vapor deposition), bottom-
up process (precipitation, electrochemical deposition) – properties of nanomaterials – types –
nanotubes -carbon nanotubes, applications of CNT - nanocomposites – General applications of
nanomaterials in electronics, information technology, medical and healthcare, energy,
environmental remediation, construction and transportation industries.

List of Experiments
1. Determination of concentration of BaSO4 nanoparticles by conductometric titrations.
2. Preparation of ZnO nanocrystal by precipitation method.
TOTAL: 75 PERIODS

OUTCOMES:
Upon completion of the course, the students will be able to:
CO1: Interpret the water quality parameters and explain the various water treatment methods.
CO2: Construct the electrochemical cells and sensors.
CO3: Compare different energy storage devices and predict their relevance in electric vehicles.
CO4: Classify different types of smart materials, their properties and applications in
Engineering and Technology.
CO5: Integrate the concepts of nano chemistry and enumerate its applications in various fields.

TEXT BOOKS:
1. P. C. Jain and Monika Jain, “Engineering Chemistry”, Dhanpat Rai Publishing Company
Pvt. Ltd., New Delhi, 17th Edition, 2022.
2. Sivasankar B., “Engineering Chemistry”, Tata McGraw-Hill Publishing Company Ltd.,
New Delhi, Second reprint, 2012

REFERENCES:
1. S.S. Dara and S.S. Umare, “A Textbook of Engineering Chemistry”, S. Chand & Company,
New Delhi, 12th Edition, 2013.
2. V.R. Gowarikar, Polymer Science, New Age International Publishers, 2nd edition, 2021.
3. J. C. Kuriacose and J. Rajaram, “Chemistry in Engineering and Technology”, Volume -1
& Volume -2, Tata McGraw-Hill Education Pvt. Ltd., 2010.
4. Geoffrey A. Ozin, Andre C. Arsenault and Ludovico Cademartiri, “Nanochemistry: A
Chemical Approach to Nanomaterials”, 2nd Edition, RSC publishers, 2015.
5. Prasanna Chandrasekhar, “Conducting polymers, fundamentals and applications–
Including Carbon Nanotubes and Graphene”, Springer Science &Business Media, New
York, 2nd Edition, 2019.
6. J. Mendham, R. C. Denney, J. D. Barnes, M. J. K. Thomas and B. Sivasankar, “Vogel’s
Quantitative Chemical Analysis”, Pearson Education Pvt. Ltd., 6th edition, 2019.

LIST OF EQUIPMENTS:
1. Conductivity meter
2. pH meter
3. Potentiometer
 JAVA PROGRAMMING L T P C
22CS202
(Common to CSE, CSD, EEE, ECE, ME, IT, ADS and CSBS) 3 0 2 4
OBJECTIVES:
The Course will enable learners to:
 To explain object oriented programming concepts and fundamentals of Java
 To apply the principles of packages, interfaces and exceptions
 To develop a Java application with I/O streams, threads and generic programming
 To build applications using strings and collections.
 To apply the JDBC concepts
UNIT I JAVA FUNDAMENTALS 15
An Overview of Java - Data Types, Variables, and Arrays – Operators - Control Statements –
Class Fundamentals – Declaring objects – Methods – Constructors – this keyword - Overloading
methods - Overloading constructors - Access Control – Static – Final.

List of Exercise/Experiments:
1. Develop a Java application to generate Electricity bill. You must use one super class called
EB Bill and must have two sub classes namely Domestic Bill and Commercial Bill. Create a
class with the following members: Consumer no., consumer name, previous month reading,
current month reading, type of EB connection (i.e domestic or commercial). Compute the
bill amount using the following tariff
If the type of the EB connection is domestic, calculate the amount to be paid as follows:
First 100 units - Rs. 1 per unit
101-200 units - Rs. 2.50 per unit
201 -500 units - Rs. 4 per unit
> 501 units - Rs. 6 per unit
If the type of the EB connection is commercial, calculate the amount to be paid as
follows:
First 100 units - Rs. 2 per unit
101-200 units - Rs. 4.50 per unit
201 -500 units - Rs. 6 per unit
> 501 units - Rs. 7 per unit
2. Arrays Manipulations: (Use Methods for implementing these in a Class)
a. Find kth smallest element in an unsorted array
b. Find the sub array with given sum
c. Matrix manipulations – Addition, Subtraction, Multiplication
d. Remove duplicate elements in an Array
e. Accept an integer value N and print the Nth digit in the integer sequence 1, 2, 3, 4, 5,
6, 7, 8, 9, 10, 11, 12, 13, 14, 15 and so on till infinity.
Example: The 11th digit in the sequence 12345678910111213…. is 0.
UNIT II INHERITANCE, INTERFACES AND EXCEPTION HANDLING 15
Inheritance: Inheritance basics, Using super, Method Overriding, Using Abstract Classes, Using
final with Inheritance - Package and Interfaces: Packages, Packages and member access,
Importing Packages, Interfaces, Static Methods in an Interface – Exception Handling:
Exception-Handling Fundamentals, Exception Types, Uncaught Exceptions, Using try and
catch, Multiple catch Clauses, Nested try Statements, throw, throws, finally, Java’s Built-in
Exceptions.

List of Exercise/Experiments:
1. Develop a Java application with Employee class with Emp_name, Emp_id, Address,
Mail_id, Mobile_no as members. Inherit the classes, Programmer, Assistant Professor,
Associate Professor and Professor from employee class. Add Basic Pay (BP) as the member
 of all the inherited classes with 97% of BP as DA, 10 % of BP as HRA, 12% of BP as PF,
0.1% of BP for staff club fund. Generate pay slips for the employees with their gross and net
salary.
2. Design a Java interface for ADT Stack. Implement this interface using array and built-in
classes. Provide necessary exception handling in both the implementations.
3. Write a Java Program to create an abstract class named Shape that contains two integers
and an empty method named print Area(). Provide three classes named Rectangle, Triangle
and Circle such that each one of the classes extends the class Shape. Each one of the
classes contains the methods print Area () that prints the area of the given shape and Number
of sides() that prints the number of sides of the given shape.
4. Write a Java program to apply built-in and user defined exceptions.
UNIT III MULTITHREADING, I/O AND GENERIC PROGRAMMING 15
Multithreaded Programming: Creating a Thread, Thread Priorities, Synchronization, Interthread
Communication – I/O: I/O Basics, Reading Console Input, Writing Console Output, Reading
and Writing Files – Generics: Introduction, Generic class, Bounded Types, Generic Methods,
Generic Interfaces, Generic Restrictions.

List of Exercise/Experiments:
1. Write a Java program that correctly implements producer consumer problem using the
concept of inters thread communication.
2. Write a Java program to read and copy the content of one file to other by handling
all file related exceptions.
UNIT IV STRING HANDLING AND COLLECTIONS 15
Lambda Expressions - String Handling – Collections: The Collection Interfaces, The Collection
Classes – Iterator – Map - Regular Expression Processing.

List of Exercise/Experiments:
1. String Manipulation:
a. Reversing a set of words and count the frequency of each letter in the string.
b. Pattern Recognition - Find the number of patterns of form 1[0]1 where [0] represents
any number of zeroes (minimum requirement is one 0) there should not be any other
character except 0 in the [0] sequence in a given binary string.
c. Remove all the occurrences of string S2 in string S1 and print the remaining.
d. Find the longest repeating sequence in a string
e. Print the number of unique string values that can be formed by rearranging the letters
in the string S.
2. Collections:
a. Write a program to perform string operations using ArrayList. Write functions for the
following
i. Append - add at end
ii. Insert – add at particular index
iii. Search
iv. List all string starts with given letter
b. Find the frequency of words in a given text.
UNIT V JDBC CONNECTIVITY 15
JDBC – DataSource, Configurations, Connection, Connection Pools, Driver Types, ResultSet,
Prepared Statement, Named Parameter, Embedded SQL (Insert, Update, Delete, Join, union etc),
ResultSet Navigation, Connection Close and Clean up.
List of Exercise/Experiments:
1. Mini Project (using JDBC)
TOTAL: 75 PERIODS
OUTCOMES:
Upon completion of the course, the students will be able to:

CO1: Understand the object oriented programming concepts and fundamentals of Java.
CO2: Develop Java programs with the packages, interfaces and exceptions.
CO3: Build Java applications with I/O streams, threads and generics programming.
CO4: Apply strings and collections in developing applications.
CO5: Implement the concepts of JDBC.
TEXT BOOK:
1. Herbert Schildt, “Java: The Complete Reference”, 11th Edition, McGraw Hill Education,
2019.
REFERENCES:
1. Cay S. Horstmann, Gary Cornell, “Core Java Volume – I Fundamentals”, 11th Edition,
Prentice Hall, 2019.
2. Paul Deitel, Harvey Deitel, Java SE 8 for programmers, 3rd Edition, Pearson, 2015.
3. Steven Holzner, Java 2 Black book, Dream tech press, 2011.
4. Timothy Budd, Understanding Object-oriented programming with Java, Third Edition,
Pearson Education, 2008.
5. https://infyspringboard.onwingspan.com/web/en/app/
toc/lex_29959473947367270000_shared/overview
LIST OF EQUIPMENTS:
1. Systems with either Netbeans or Eclipse, JDK 1.7 and above, Linux and MySQL

Laboratory Course with Theory Component:

L T P C
COMPUTER AIDED ENGINEERING GRAPHICS
22ME202 (Common to CE, CSE, CSD, ECE, EEE, ME, IT and ADS) 1 0 2 2

OBJECTIVES:
The Course will enable learners to:
 Help students understand universal technical drawing standards.
 Provide training on drafting software to draw part models.
 Demonstrate the concepts of orthographic and isometric projections.
 Use drawing skills for communicating concepts, ideas for engineering product design.
 Use pictorial views to visualize and draw the isometric view of the objects.
INTRODUCTION TO CONVENTIONS IN ENGINEERING DRAWING AND
UNIT I
CONIC SECTIONS (3+6)
Introduction to Engineering Drawing - Importance of graphics in engineering applications – Use
of drafting instruments – BIS conventions and specifications – Size, layout and folding of
drawing sheets – Lettering and dimensioning. Conic curves - Ellipse, Parabola and Hyperbola by
Eccentricity method.

List of Exercise/Experiments
1. Drawing of a title block with necessary text, projection symbol and lettering using drafting
software.
 2. Drafting of Conic curves - Ellipse, Parabola and Hyperbola.
UNIT II ORTHOGRAPHIC PROJECTION (3+6)
Visualization concepts and Orthographic Projection - Layout of views – Orthographic
Projection- Conversion of pictorial diagram into orthographic views.
List of Exercise/Experiments
1. Drawing orthographic view of simple solids like Prism, Pyramids, Cylinder, Cone, etc, and
dimensioning.
2. Drawing of orthographic views from the given pictorial diagram.
UNIT III PROJECTION OF PLANES (3+6)
Projection of planes (polygonal and circular surfaces) inclined to both the planes by rotating
object method.
List of Exercise/Experiments
1. Drawing of plane Surface inclined to HP.
2. Drawing of plane Surface inclined to VP.

UNIT IV PROJECTION OF SOLIDS (3+6)

Projection of simple solids like Prisms, Pyramids, Cylinder and Cone when the axis is inclined
to HP by rotating object method.
[

List of Exercise/Experiments
1. Drawing of simple solids like prism and pyramids when the axis is inclined to HP.
2. Drawing of simple solids like cylinder and cone when the axis is inclined to HP.
UNIT V ISOMETRIC DRAWING (3+6)
Principles of isometric view – Isometric view of simple solids – Prism, Pyramid, Cylinder and
Cone.
List of Exercise/Experiments
1. Drawing isometric projection of simple solids.
2. Modeling of 2D to 3D objects using drafting software.
TOTAL: 45 PERIODS
OUTCOMES:
Upon the completion of this course the students will be able to
CO1: Explain the various engineering standards required for drafting and explore
knowledge in conic sections.
CO2: Draw the orthographic views of 3Dprimitive objects.
CO3: Describe the projection of plane surfaces by the rotating plane method.
CO4: Apply the projection concepts and drafting tools to draw projections of solids.
CO5: Sketch the pictorial views of the objects using CAD tools.

TEXT BOOKS:

1. Natarajan K.V., “A text book of Engineering Graphics”, Dhanalakshmi Publishers,

Chennai, 33rd Edition, 2020.
2. Venugopal K. and Prabhu Raja V., “Engineering Graphics”, New Age International (P)
Limited, 15th Edition, 2019.
REFERENCES:
1. Bhatt N.D. “Engineering Drawing”, Charotar Publishing House, 53rd edition , 2019.
2. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill
Publishing Company Limited, New Delhi, 3rd Edition, 2019.
3. Engineering Drawing Practice for Schools and Colleges BIS SP46:2003 (R2008),
Published by Bureau of Indian Standards (BIS), 2008.
4. Parthasarathy. N.S and Vela Murali, “Engineering Graphics”, Oxford University, Press,
New Delhi, 2019.
5. Gopalakrishna. K.R., Engineering Drawing Vol. 1 & 2, Subhas Publications, 27th
Edition, 2017.
LIST OF EQUIPMENT FOR A BATCH OF 30 STUDENTS
S. No. Description of Equipment Quantity

1. Computer nodes or systems with suitable graphics facility 30 No

2. Software for Drafting and Modelling 30 No

3. Laser Printer or Plotter to print / plot drawings 1 No

Laboratory Course:
PRODUCT DEVELOPMENT LAB – 2 L T P C
22ME211
(Common to all Branches) 0 0 2 1
The students may be grouped into a batch of strength 3 or 4 to work under a project supervisor.
The student batches should study the device/system/component and will do literature review to
develop prototype idea. Further at the end of the semester they will make a final presentation to
exhibit the conceptual design skills and the process to develop a product.

OBJECTIVES:
The Course will enable learners to:
 Use the innovative design methodology to articulate the product concepts.
 Summarize the requisite Engineering Principles for transforming concepts into
products.
 Conduct basic tests to extract the qualitative and quantitative performance factors.
LIST OF EXPERIMENTS:
1. Study of Basic Engineering Design Concepts.
2. Conduct a literature survey on the implementation of the design concepts.
3. Prepare the design concepts for an identified literature gap.
4. Present the Product Idea Presentation – Phase II.
TOTAL: 30 PERIODS
OUTCOMES:
Upon completion of the course, the students will be able to:
CO1: Understand the working and capacity of various engineering systems.
CO2: Infer the outcomes in the product development process.
CO3: Perform basic engineering and material characterization tests.
CO4: Demonstrate the ability to provide conceptual design strategies for a product.
CO5: Implement the Science, Engineering, Technology and Mathematics (STEM) for product
design.