Scribd
Upload
339 views2 pages

15.2.2 Packet Tracer - Configure NAT For IPv4 - ILM

The document describes configuring dynamic and static NAT on router R2. Dynamic NAT with port address translation (PAT) will be used to translate addresses from three internal LANs to a single outside address. Static NAT will map an internal server to an outside address. The configuration creates an ACL to permit the internal addresses, a NAT pool using the first address of 209.165.202.128/30, and configures NAT with the ACL and pool. It also configures static NAT for the internal server address. Interface configurations specify which interfaces participate in NAT.

Uploaded by

fotcheping noubissi Flora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
339 views2 pages

15.2.2 Packet Tracer - Configure NAT For IPv4 - ILM

The document describes configuring dynamic and static NAT on router R2. Dynamic NAT with port address translation (PAT) will be used to translate addresses from three internal LANs to a single outside address. Static NAT will map an internal server to an outside address. The configuration creates an ACL to permit the internal addresses, a NAT pool using the first address of 209.165.202.128/30, and configures NAT with the ACL and pool. It also configures static NAT for the internal server address. Interface configurations specify which interfaces participate in NAT.

Uploaded by

fotcheping noubissi Flora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Packet Tracer - Configure NAT for IPv4 (Instructor Version)

Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only.

Addressing Table

Device Interface IP Address

R1 S0/0/0 10.1.1.1/30

R1
F0/0 192.168.10.1/24
R2 S0/0/0 10.1.1.2/30

R2
S0/0/1 10.2.2.1/30

R2
S0/1/0 209.165.200.225/27

R2
F0/0/0 192.168.20.1/24
R3 S0/0/1 10.2.2.2/30

R3
F0/0 192.168.30.1/24
PC1 NIC 192.168.10.10/24
PC2 NIC 192.168.30.10/24
local.pka NIC 192.168.20.254/24
Outside PC NIC 209.165.201.14/28
cisco.pka NIC 209.165.201.30/28

Objectives
 Configure Dynamic NAT with PAT
 Configure Static NAT

Background / Scenario
In this lab, you will configure a router with dynamic NAT with PAT. This will translate addresses from the three
internal LANs to a single outside address. In addition, you will configure static NAT to translate an internal
server address to an outside address.

Instructions
In this activity you will only configure router R2.
Open configuration window

 Use a named ACL to permit the addresses from LAN1, LAN2, and LAN3 to be translated. Specify the
LANs in this order. Use the name R2NAT. The name you use must match this name exactly.
 Create a NAT pool named R2POOL. The pool should use the first address from the 209.165.202.128/30
address space. The pool name you use must match this name exactly. All translated addresses must use
this address as their outside address.

 2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
Packet Tracer - Configure NAT for IPv4

 Configure NAT with the ACL and NAT pool that you have created.
 Configure static NAT to map the local.pka server inside address to the second address from the
209.165.202.128/30 address space.
 Configure the interfaces that will participate in NAT.
Close configuration window
End of document

Answer Configurations

Router R2
enable
configure terminal
interface FastEthernet0/0
ip nat inside
interface Serial0/0/0
ip nat inside
interface Serial0/0/1
ip nat inside
interface Serial0/1/0
ip nat outside
ip nat pool R2POOL 209.165.202.129 209.165.202.129 netmask 255.255.255.252
ip nat inside source list R2NAT pool R2POOL overload
ip nat inside source static 192.168.20.254 209.165.202.130
ip access-list standard R2NAT
permit 192.168.10.0 0.0.0.255
permit 192.168.20.0 0.0.0.255
permit 192.168.30.0 0.0.0.255
end

 2019 - 2020 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 2 www.netacad.com

You might also like