PA No.

0226
P50X901 / DW3-D
P50V701 / DW3-D
P50S601 / DW3-F
R/C: CLU-4372A p/n HL02402 P50X901
R/C: CLU-4374A p/n HL02404 P50V701
R/C: CLU-4373A p/n HL02403 P50S601
SERVICE MANUAL
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MAY 2007 HHEA-MANUFACTURING DIVISION
PLASMA DISPLAY PANEL
DATE REVISION # REASON
Oct, 08, 2007 SM00001 FIRST ISSUE OF MANUAL
Nov, 12, 2007 CH1 Added Remote Control Info. How to enter Service Menu (Page 31)
Nov, 12, 2007 CH1 Added In-Depth 50AF1 Panel Troubleshooting Flowchart (Page 32)
Nov, 27, 2007 CH2 Added additional adjustment details about power supply (Page 48)
Dec, 05, 2007 CH3 Added note about power supply adjustment (Page 4)
















SERVICE MANUAL REVISION HISTORY INFORMATION
PA No. 0226
P50X901 / DW3-D
P50V701 / DW3-D
P50S601 / DW3-F
R/C: CLU-4372A p/n HL02402 P50X901
R/C: CLU-4374A p/n HL02404 P50V701
R/C: CLU-4373A p/n HL02403 P50S601
SERVICE MANUAL
TO GO TO A CHAPTER, CLICK ON ITS HEADING BELOW
CONTENTS
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
Electric shock do not perform any servicing other than that contained in the operating instructions
Unless you are qualified to do so. Before servicing this chassis, it is important that the service
Technician read the IMPORTANT SAFETY INSTRUCTIONS in this service manual.
CAUTION:
SAFETY NOTICE
USE ISOLATION TRANSFORMER WHEN SERVICING
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MAY 2007 HHEA-MANUFACTURING DIVISION
PLASMA DISPLAY PANEL
SPECIFICATIONS ................................................................................................... 2
ADJUSTMENTS (See below for Power Supply Adjustment Info.) ........................... 4
BLOCK DIAGRAMS ................................................................................................. 5
CONNECTOR DIAGRAMS ...................................................................................... 7
FINAL WIRING DIAGRAM ....................................................................................... 9
QUICK DISASSEMBLY GUIDE ............................................................................... 11
CIRCUIT SCHEMATIC DIAGRAMS ........................................................................ 13~27
PARTS LIST ............................................................................................................ 28
PANEL PARTS ....................................................................................................... 29
PANEL CONNECTORS .......................................................................................... 30
REMOTE CONTROL HOW TO ENTER SERVICE MENU DW-1, 2 AND 3 ......... 31
IN DEPTH 55 INCH PANEL (50AF1) TROUBLESHOOTING FLOW CHARTS ...... 32
REPLACING THE POWER SUPPLY INFORMATION and ADJUSTMENTS ......... 48
Components having special safety characteristics are identified by a ! on the schematics and on the parts list in this
Service Data and its supplements and bulletins. Before servicing the chassis, it is important that the service technician
Read and follow the Important Safety Instructions in this Service Manual.
This ADDENDUM is made due to the new models P50X901 (DW3D), P50V701 (DW3D) and P50S601 (DW3F).
They are different to models P50H401 (DW3A), P50T501 (DW3A) and P50H4011 (DW3A). The Main difference is the panel,
the X/V/S models use "AF1" Plasma Panel and the H/T Models use "AE1" Plasma Panel. Software (Digital Main PWB) is also
different because of Plasma Panel difference.
Refer to Service Manual PA0224 when servicing X/V/S models in regards to other adjustments not covered in this addendum.
This ADDENDUM indicates only the differences and special considerations to be taken when servicing the X/V/S models.

2
DW3
TABLE OF CONTENTS
SPECIFICATIONS


APPEARANCE

Model name Series Name Cabinet Design
P50X901 Director's High Gloss Black/Frame, High Gloss Black/Bezel, High Gloss Hidden/SP
P50S601 UltraVision High Gloss Black/Frame, Black/Bezel, High Gloss Hidden/SP
P50V701 UltraVision High Gloss Black/Frame, Black/Bezel, High Gloss Hidden/SP


SYSTEM

Channel coverage band Reception system
No. Model name VHF(ch) UHF(ch) CATV(ch) NTSC ATSC 64QAM/
(8VSB) 256QAM
1 P50X901 213 1469 A-5A-1, A I,J W,W+1 W+94 X X X
2 P50S601 X X X
3 P50V701 X X X



STRUCTURAL DIMENSIONS

No. Model name WIDTH HEIGHT DEPTH WEIGHT
[mm] [mm] [mm] [kg] Note
1 P50X901 1250 885(817) 423(134) 50.9(44.8)
Without table
top stand.
2 P50S601 1241.4 884(820.2) 422.7(129) 49.8(43.7)
3 P50V701 1241.4 884(820.2) 422.7(129) 49.9(43.8)



EXTERNAL TERMINALS AND JACKS

Model Rear
name A/V S COMP. HDMI M A Subwoofer ANT OPT DV IN POD
IN IN IN OUT OUT OUT IN OUT IEEE 1394 CARD
P50X901 3 1 2 2 1 1 1 1 1
P50S601 3 1 2 2 1 1 1 1
P50V701 3 1 2 2 1 1 1 1 1

Model Front Rear
name A/V S COMP. HDMI Photo Upgrade DV IR OUT IR OUT SWIVEL RS232C
IN IN IN (SD) IN /G-LINK OUT
P50X901 1 1 1 Common 1 1 1 1
P50S601 1 1 1 Common (1: Service) 1 1
P50V701 1 1 1 Common 1 1 1 1















3
DW3
TABLE OF CONTENTS



MAIN FEATURES

No. Feature
P50
X901
P50
S601
P50
V701
1 Panel AF1 AF1 AF1
2 Resolution
1920x
1080i
1920x
1080i
1920x
1080i
3
Front Filter with ARF
(Transparency)
Mesh
(36%)
Mesh
(41%)
Mesh
(36%)
4 Seine2 X X X
5 FRC (FC8) X X
6 One NTSC/ATSC Tuner X X X
7 POD (Point Of Deployment) X X
8 PinP (Digital/External Analog SPLIT) X X
9 3 Picture Mode X X X
10 Color Temperature Mode 4 4 4
11 Color Decoding Adjustment X
12 Color Management Adjustment X
13 7 Mode Aspect Ratio Interchangeable X X X
14 EPG (G-GUIDE) Function X X
15 SD-card Photo Viewer X X
16 Audio Output 10W x2 10W x2 10W x2
17 Swivel Power Power Power
18 AV NET, AV NET Learning X X
19 IR Pass Through X X
20 OSD Design Direc. B C
21 Energy Star



POWER CONSUMPTION

MODEL INDICATED VALUE PST [W] CHASSIS
NAME Max. Rating Max. Rating (Average Rating) Without POD With POD
P50X901 605W 5.7A 364W 0.6W 14W DW3D
P50S601 587W 5.3A 350W 0.6W - DW3F
P50V701 605W 5.7A 364W 0.6W 14W DW3D


SAFETY KEY COMPONENTS

Symbol.No. / P/N / Spec. Model
F9A1 / P#FN00551 / Fuse
10A
P50X901, P50V701, P50S601



4
DW3
TABLE OF CONTENTS
ADJUSTMENTS
NOTE: The next adjustment procedure is only for the P50X901, P50V701 and the P50S601, refer to the service manual PA
no. 0224 for all the other adjustments.
VIDEO COLOR TEMPERATURE ADJUSTMENT - BLACK AND WHITE MODE.
-Preparation
(1) Set the output of signal generator to white raster (Ratio: 100%).
(2) Component signal (480i)
POWER SUPPLY Vs, Va VOLTAGE ADJUSTMENT
Since Power Supply P#HA02202 is already adjusted by Manufacturer is not necessary to adjust any voltage.
Video level: 0.7Vp-p
SYNC: 0.3Vp-p
Set-up level: 0V
(3) Input white raster signal into COMPONENT input terminal.
(4) Set user control to Day (Dynamic) mode (Picture mode).
(5) Confirm that the mode is set as Factory setting mode .
(6) Aspect: 4:3 Expanded.
-Adjustment
(1) Perform the following adjustment with the remote control.
(2) Set the CRT color analyzer (CA-100) at the center of the panel.
(3) Ensure that the adjustment parameters R/G/B DRIVE(B/W) are all set as FF.
(4) After receiving the PC signal, reduce the value of two (or only one) of the RGB adjustment
parameters step down two (or one) among adjustment R/G/B DRIVE(B/W) and adjust the value
shown below.
At least one of the data should be FF.
-Remarks
(1) Color temperature should be adjusted under the condition in which the screen is the brightest,
thus the initial value for adjustment is set at its maximum.
(2) Adjustment is made by reducing brightness only. Reduce the brightest color for adjustment.
(3) Video color temperature & Adjustment number are the same, but addresses in the memory are
different, thus there sno problem.
(4) When this adjustment item is done through MMC slot, Sniffer Jig must be inserted after the set is
switched to Sniffer Mode. (the PC would have trouble if this sequence is not kept.)
Specification
Video Color temperature (B/W)
x = 0.335 0.005
y = 0.343 0.005
( Color temp
?
5400K)
Impor tant Note: Please don t move any control (potenciometer) on power supply since is already adjusted.
See Page 48: Please see page 48 for additional Power Supply Adjustment Information.

5
DW3
TABLE OF CONTENTS
BLOCK DIAGRAM

For P50X901, P50V701 and P50S601.


























































X
-
S
U
S

Y

S
U
S

Driver Controller
LVDS Receiver Signal Controller
Data Controller
LOGIC
Address Driver
S
c
a
n

D
r
i
v
e
r

S
c
a
n

D
r
i
v
e
r

PDP
Panel
Module
Speaker L
Vcego
Vsago
Stand
Speaker R
Remote
Control


LED PWB
IR
Receiver
LED
RGB
(LVDS)

CPUgo
PDPgo

Power2
Power1


SD PWB
SD/MMC
Card I/F
HDMI
I/F
POD PWB
POD
Card I/F
DC-DC
(POD-Vcc)
PLD
(Oberon)
FAN FAN


Control PWB
Key
SW
A/V
Pin Jack
Filter PWB
Main
Power SW
Fuse
Power
Supply
Unit
AC
Inlet
FC8 PWB
DC-DC
Conv.
FC8

DDR2
Main-Digital PWB
Sub
Micro
Audio
DSP
Seine2
A-chip
Seine2
D-chip
VCXO
PLL
Audio
PWM
PLD
(Nereid)

DC-DC
Conv.

Audio
ADC
DDR2
Digital
Audio
Amplifier

Audio
DAC
HDMI
Demodulator
UEI
Terminal PWB
IR-Blaster
Driver
OPT-Audio
Output
RS-232C
Video
SW
A/V
Pin Jack
Audio
SW
Motor
Driver
Reg.
For FAN
Digital/
Analog
Tuner
AC-CLK
FAN FAN
P50X901, P50V701 only.

6
DW3
TABLE OF CONTENTS

Power system block diagram
































Digital
Audio Amp.
Sub
MICRO
Terminal PWB
Main-Digital PWB
+3.3V
DC-DC
Buffer
LED PWB
IR-receiver
LED
Swivel
Motor
Driver
IR-Blaster
Driver
OPT
Output
PLD
(Nereid)
+3.0V
Reg.
VCXO PLL
+2.5V
Reg.
FAN
Vari.
Reg.
+12V
Reg.
+9V
Reg.
LPF
+3.3V
Reg.
+3.3V
Reg.
Audio
ADC
+5V
Reg.
Swivel
Stand
FAN
SD PWB
I
2
C
Buffer
SD
MMC
+3.3V
Reg.
Clock
Buffer
AV-Control
I
2
C
Level shift
+9V
Reg.
AV SW
+5V
Reg.
+2.5V
Reg.
+1.5V
Reg.
+3.3V
Reg.
Seine2-A
+5V
Reg.
AGC OOB
+5V
Reg.
+30V
Reg.
+5V
Reg.
Tuner
+1.0V
DC-DC
+1.8V
Reg.
Demodulator
+3.3V
Reg.
+1.05V
DC-DC
FC8
+1.8V
DC-DC
FC8-
DDR2
FC8 PWB
+1.05V
Reg.
+3.3V
Reg.
LVDS
SW
+1.8V
Reg.
Vari.
Reg.
POD-
Vpp
+3.3V
DC-DC
POD-
Vcc
POD PWB
+2.5V
Reg.
+1.2V
Reg.
+3.3V
Reg.
Oberon2
+9V
Reg.
Buffer
+3.3V
Reg.
Key
ROM
Cable
Equalizer
+3.3V
Reg.
+5V
Reg.
Bus
SW
+1.8V
DC-DC
Seine2-D
+2.5V
Reg.
+1.3V
Reg.
+1.3V
DC-DC
Seine2-D
DDR2
+9V
Reg.
Audio
DSP
Audio
PWM
+3.3V
Reg.
Audio
DAC
+5V
Reg.
IR
Mod.
Flash Memory
(OneNand)
Filter PWB
AC120V
AC
SW
+5.6V
STBY+5V
+15V
Vcc
Va
Vs
+10.5V
Power Supply Unit
PDP Panel Module
+16V
Bus
SW
Control PWB
Buffer
x2 x2
x2 x2
P50X901, P50V701 only.
Va 1 1 Va
N.C. 2 2 N.C.
Vcc 3 3 Vcc
GND 4 4 GND
GND 5 5 GND
GND 6 6 GND
N.C. 7 7 N.C.
Vs 8 8 Vs
Vs 9 9 Vs
Vs 10 10 Vs
L 2 AC(L) AC(L) 1 1 AC(L)
AC IN N 1 AC(N) AC(N) 2 2 AC(N)
FG Vcc 1 1 Vcc
GND 2 2 GND
N.C. 3 3 N.C.
GND 4 4 GND
Vra 5 5 Vra
Vrs 6 6 Vrs
Vcego 7 7 Vcego
Vsago 8 8 Vsago
N.C. 9 9 N.C.
STBY+5V 1 1 STBY+5V GND 51 1 GND
GND 2 2 GND SDA 50 2 SDA
N.C. 3 3 N.C. SCL 49 3 SCL
PoWERoFF 4 4 PoWERoFF GND 48 4 N.C.
ACCLoCK 5 5 ACCLoCK PNL_RX 47 5 N.C.
PoWER1 6 6 PoWER1 iRQ 46 6 IRQOUT
PoWER2 7 7 PoWER2 PNL_TX 45 7 N.C.
N.C. 8 8 PNLoN PDWN 44 8 PDWN
PNLRST 43 9 CPUGO
PNLoN 42 10 PDPGO
GND 41 11 GND
TA1- 40 12 RA0-
+5.6V 1 1 +5.6V TA1+ 39 13 RA0+
+5.6V 2 2 +5.6V TB1- 38 14 RA1-
+5.6V 3 3 +5.6V TB1+ 37 15 RA1+
GND 4 4 GND TC1- 36 16 RA2-
GND 5 5 GND TC1+ 35 17 RA2+
GND 6 6 GND GND(LVDS) 34 18 GND
+10.5V 7 7 +10.5V TCLK1- 33 19 RACLK-
GND 8 8 GND TCLK1+ 32 20 RACLK+
+16V 9 9 +16V GND 31 21 GND
GND 10 10 GND TD1- 30 22 RA3-
GND 11 11 GND TD1+ 29 23 RA3+
GND 12 12 GND TE1- 28 24 RA4-
+15V 13 13 N.C. TE1+ 27 25 RA4+
+15V 14 14 N.C. GND 26 26 GND
+15V 15 15 N.C. GND 25 27 GND
TA2- 24 28 RB0-
TA2+ 23 29 RB0+
TB2- 22 30 RB1-
1 GND TB2+ 21 31 RB1+
2 GND TC2- 20 32 RB2-
3 GND TC2+ 19 33 RB2+
4 +15V GND(LVDS) 18 34 GND
5 +15V TCLK2- 17 35 RBCLK-
6 +15V TCLK2+ 16 36 RBCLK+
GND 15 37 GND
TD2- 14 38 RB3-
TD2+ 13 39 RB3+
TE2- 12 40 RB4-
TE2+ 11 41 RB4+
GND 10 42 GND
GND 9 43 GND
GND 8 44 GND
GND 7 45 GND
GND 6 46 GND
N.C. 5 47 N.C.
1 GND GND 2 PNL_MoDE 4 48 N.C.
3 +5.6V D+3.3V 4 PNL_P2 3 49 N.C.
5 +5.6V D+3.3V 6 PNL_P0 2 50 N.C.
7 +5.6V D+3.3V 8 PNL_CLK 1 51 N.C.
GND 1 1 GND 9 +5.6V GND 10
MoToR+ 2 2 MoToR+ 11 GND GND 12
MoToR- 3 3 MoToR- 13 SBY+5.0V SBY+3.3V 14
JoiNTDET 4 4 JoiNTDET 15 GND GND 16
SW_CoM 5 5 SW_CoM 17 +16V +10V 18
19 GND SWiVEL_G 20
21 N.C. MAiN_Y/V 22
23 iRoUT GND 24
25 N.C. MAiN_Y_E 26
27 N.C. GND 28
29 FiN MAiN_PB 30
31 RiN GND 32
33 CPDET MAiN_PR/C 34
VCC 1 1 VCC 35 SWVLDET GND 36
LoCK 2 2 LoCK 37 GND SUB_Y/V 38
GND 3 3 GND 39 AEP_R GND 40
41 AEP_L S/PDiT 42
43 GND GND 44
45 ASP_R SD_Yo 46
47 ASP_L GND 48
49 GND SD_Co 50
51 N.C. GND 52
53 GND FAN_EN 54
55 SEL_L_S N.C. 56
VCC 1 1 VCC 57 SEL_R_S GND 58
LoCK 2 2 LoCK 59 GND N.C. 60
GND 3 3 GND 61 SCL1_3V_100 N.C. 62
63 SDA1_3V_100 GND 64
65 GND N.C. 66
67 SCL_TU N.C. 68
69 SDA_TU GND 70
71 ANA/DIGI SEL_L_M 72 Lout-P 1
73 GND SEL_R_M 74 Lout-N 2
75 IF_AGC GND 76 Rout-P 3
77 GND UATXD3 78 Rout-N 4
VCC 1 1 VCC 79 FDC_AGC UARXD3 80
LoCK 2 2 LoCK 81 GND GND 82
GND 3 3 GND 83 FAT_INP SDA2_3V_100 84
4 N.C. 85 GND GND 86
87 GND SCL2_3V_100 88
89 FAT_INN GND 90
91 GND N.C. 92
93 FDC_INP N.C. 94
95 GND PoWER_2_Td 96
97 FDC_INN N.C. 98
99 GND GND 100
VCC 1 1 VCC 101 FS_OUTP FAN_CONT 102
LoCK 2 2 LoCK 103 GND N.C. 104
GND 3 3 GND 105 PoWERoFF GND 106
4 N.C. 107 GND N.C. 108
109 FS_OUTN N.C. 110
111 GND N.C. 112
113 GND N.C. 114
115 FAN_DET GND 116
117 GND N.C. 118
119 MTV_AFC GND 120
121 SIG_DET N.C. 122
123 N.C. GND 124
125 PNLoN N.C. 126
127 GND GND 128
129 REC_MUTE N.C. 130
131 GND GND 132
133 N.C. N.C. 134
135 N.C. GND 136
137 GND AVCTXD 138
139 N.C. AVCRXD 140
141 N.C. AVCCTS_N 142
143 N.C. AVCRTS_N 144
145 N.C. GND 146
147 N.C. N.C. 148 SDCLK 1 1 SDCLK
149 N.C. N.C. 150 SDCMD 2 2 SDCMD
151 N.C. N.C. 152 GND 3 3 GND
153 N.C. N.C. 154 SDDAT0 4 4 SDDAT0
155 GND N.C. 156 SDDAT1 5 5 SDDAT1
157 N.C. N.C. 158 SDDAT2 6 6 SDDAT2
159 GND N.C. 160 SDDAT3 7 7 SDDAT3
+5.6V 8 8 +5.6V
SDCD 9 9 SDCD
SDWP 10 10 SDWP
GND 11 11 GND
D+3.3V 12 12 D+3.3V
V4_CY 1 1 V4_CY
GND 2 2 GND
V4_Y 3 3 V4_Y
GND 4 4 GND
V4_C 5 5 V4_C VBUS 31 1 VBUS
GND 6 6 GND VBUS 30 2 VBUS
V4_L 7 7 V4_L VBUS 29 3 VBUS
V4_R 8 8 V4_R GND 28 4 GND
GND 9 9 GND D+ 27 5 D+
T+9V 10 10 T+9V D- 26 6 D-
PWRKEY 11 1 PWRKEY GND 25 7 GND
ADKEY0 12 2 ADKEY0 +3.3V 24 8 +3.3V
ADKEY1 13 3 ADKEY1 +5V 23 9 +5V
GND 14 4 GND WP 22 10 WP
HPD 21 11 HPD
DDCPOW 20 12 DDCPOW
GND 19 13 GND
SDA 18 14 SDA
SCL 17 15 SCL
ACK 16 16 ACK
GND 15 17 GND
Clock- 14 18 Clock-
Clock+ 13 19 Clock+
GND 12 20 GND
iR_iN 1 1 iR_iN Data0- 11 21 Data0-
STBY+3.3V 2 2 STBY+3.3V Data0+ 10 22 Data0+
iR_CAPiN 3 3 iR_CAPiN GND 9 23 GND
GND 4 4 GND Data1- 8 24 Data1-
+5.6V 5 5 +5.6V Data1+ 7 25 Data1+
STBY+5V 6 6 STBY+5V GND 6 26 GND
ALARMLED0 7 7 ALARMLED0 Data2- 5 27 Data2-
PWRLED0 8 8 PWRLED0 Data2+ 4 28 Data2+
PWRLED1 9 9 PWRLED1 GND 3 29 GND
MLEDG_N 10 10 MLEDG_N CEC 2 30 CEC
MLEDR_N 11 11 MLEDR_N GND 1 31 GND
CN23
VH-10P
CN64
VH-10P
Power Supply Unit PDP Module
CONNECTION DIAGRAM
Main Digital board
CN63
EH-8P
TERMINAL PWB
PPM1
ZH-08H
PSM
501497-160VS
PFA1
ZH-03H
FAN
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
PPM2
DF3D-15H
PPM2
DF3D-15H
PPM2
DF3D-15H
PPM3
PA-6V
PMS1
501493-160VP
CONTROL PWB
PCST
GH-14V
CONTROL PWB
PCST
GH-14V
PTF
ZH-13H
PSC
GH-04H
PTF
ZH-13H
PTC
GH-10V
LED PWB
PLS
501331-11V
LED PWB
PLS
501331-11V
PA01
501786-8011
PSL
501568-11H
CN61
VT-2P
PFAC
VT-2P
EC01
FI-RE51S
CN1
FI-RE51S
PH01
FIR-31V
P403
FIR-31H
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
PDS
501331-12V
PSD
501568-12H
P403
FI-RE31S
PH01
FI-RE31S
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
PSD
501568-12H
PDS
501331-12V
SD PWB SD PWB
PSPK
PA-04V
Speaker (L)
Speaker (R)
PPU1
VT-2P
FILTER PWB AC INLET
PTW
53290-05VP-D
PWT
52418-05HS-D
SWIVEL PWB
PTW
53290-05VP-D
PWT
52418-05HS-D
SWIVEL PWB
PFA2
ZH-03H
FAN
PFB1
ZH-04H
FAN
PFB2
ZH-04H
FAN
CN8
PH-9P
CN68
PH-9P

7
DW3
CONNECTIONS DIAGRAM

For P50S601.

TABLE OF CONTENTS

8
DW3
CONNECTIONS DIAGRAM

For P50V701 and P50X901

Va 1 1 Va
N.C. 2 2 N.C.
Vcc 3 3 Vcc
GND 4 4 GND
GND 5 5 GND
GND 6 6 GND
N.C. 7 7 N.C.
Vs 8 8 Vs
Vs 9 9 Vs
Vs 10 10 Vs
L 2 AC(L) AC(L) 1 1 AC(L)
AC IN N 1 AC(N) AC(N) 2 2 AC(N)
FG Vcc 1 1 Vcc
GND 2 2 GND
N.C. 3 3 N.C.
GND 4 4 GND
Vra 5 5 Vra
Vrs 6 6 Vrs
Vcego 7 7 Vcego
Vsago 8 8 Vsago
N.C. 9 9 N.C.
STBY+5V 1 1 STBY+5V GND 51 1 GND
GND 2 2 GND SDA 50 2 SDA
N.C. 3 3 N.C. SCL 49 3 SCL
PoWERoFF 4 4 PoWERoFF GND 48 4 N.C.
ACCLoCK 5 5 ACCLoCK PNL_RX 47 5 N.C.
PoWER1 6 6 PoWER1 iRQ 46 6 IRQOUT
PoWER2 7 7 PoWER2 PNL_TX 45 7 N.C.
N.C. 8 8 PNLoN PDWN 44 8 PDWN
PNLRST 43 9 CPUGO
PNLoN 42 10 PDPGO
GND 41 11 GND
TA1- 40 12 RA0-
+5.6V 1 1 +5.6V TA1+ 39 13 RA0+
+5.6V 2 2 +5.6V TB1- 38 14 RA1-
+5.6V 3 3 +5.6V TB1+ 37 15 RA1+
GND 4 4 GND TC1- 36 16 RA2-
GND 5 5 GND TC1+ 35 17 RA2+
GND 6 6 GND GND(LVDS) 34 18 GND
+10.5V 7 7 +10.5V TCLK1- 33 19 RACLK-
GND 8 8 GND TCLK1+ 32 20 RACLK+
+16V 9 9 +16V GND 31 21 GND
GND 10 10 GND TD1- 30 22 RA3-
GND 11 11 GND TD1+ 29 23 RA3+
GND 12 12 GND TE1- 28 24 RA4-
+15V 13 13 N.C. TE1+ 27 25 RA4+
+15V 14 14 N.C. GND 26 26 GND
+15V 15 15 N.C. GND 25 27 GND
TA2- 24 28 RB0-
TA2+ 23 29 RB0+
TB2- 22 30 RB1-
1 GND TB2+ 21 31 RB1+
2 GND TC2- 20 32 RB2-
3 GND TC2+ 19 33 RB2+
4 +15V GND(LVDS) 18 34 GND
5 +15V TCLK2- 17 35 RBCLK-
6 +15V TCLK2+ 16 36 RBCLK+
GND 15 37 GND
TD2- 14 38 RB3-
TD2+ 13 39 RB3+
TE2- 12 40 RB4-
TE2+ 11 41 RB4+
GND 10 42 GND
GND 9 43 GND
GND 8 44 GND
GND 7 45 GND
GND 6 46 GND
N.C. 5 47 N.C.
1 GND GND 2 PNL_MoDE 4 48 N.C.
3 +5.6V D+3.3V 4 PNL_P2 3 49 N.C.
5 +5.6V D+3.3V 6 PNL_P0 2 50 N.C.
7 +5.6V D+3.3V 8 PNL_CLK 1 51 N.C.
GND 1 1 GND 9 +5.6V GND 10
MoToR+ 2 2 MoToR+ 11 GND GND 12
MoToR- 3 3 MoToR- 13 SBY+5.0V SBY+3.3V 14
JoiNTDET 4 4 JoiNTDET 15 GND GND 16
SW_CoM 5 5 SW_CoM 17 +16V +10V 18
19 GND SWiVEL_G 20
21 N.C. MAiN_Y/V 22
23 iRoUT GND 24
25 N.C. MAiN_Y_E 26
27 N.C. GND 28
29 FiN MAiN_PB 30
31 RiN GND 32
33 CPDET MAiN_PR/C 34
VCC 1 1 VCC 35 SWVLDET GND 36
LoCK 2 2 LoCK 37 GND SUB_Y/V 38
GND 3 3 GND 39 AEP_R GND 40
41 AEP_L S/PDiT 42
43 GND GND 44
45 ASP_R SD_Yo 46
47 ASP_L GND 48
49 GND SD_Co 50
51 N.C. GND 52
53 GND FAN_EN 54
55 SEL_L_S N.C. 56
VCC 1 1 VCC 57 SEL_R_S GND 58
LoCK 2 2 LoCK 59 GND N.C. 60
GND 3 3 GND 61 SCL1_3V_100 N.C. 62
63 SDA1_3V_100 GND 64
65 GND N.C. 66
67 SCL_TU N.C. 68
69 SDA_TU GND 70
71 ANA/DIGI SEL_L_M 72 Lout-P 1
73 GND SEL_R_M 74 Lout-N 2
75 IF_AGC GND 76 Rout-P 3
77 GND UATXD3 78 Rout-N 4
VCC 1 1 VCC 79 FDC_AGC UARXD3 80
LoCK 2 2 LoCK 81 GND GND 82
GND 3 3 GND 83 FAT_INP SDA2_3V_100 84
4 N.C. 85 GND GND 86
87 GND SCL2_3V_100 88
89 FAT_INN GND 90
91 GND N.C. 92
93 FDC_INP N.C. 94
95 GND PoWER_2_Td 96
97 FDC_INN N.C. 98
99 GND GND 100
VCC 1 1 VCC 101 FS_OUTP FAN_CONT 102
LoCK 2 2 LoCK 103 GND N.C. 104
GND 3 3 GND 105 PoWERoFF GND 106
4 N.C. 107 GND N.C. 108
109 FS_OUTN N.C. 110
111 GND N.C. 112
113 GND N.C. 114
115 FAN_DET GND 116
117 GND N.C. 118
119 MTV_AFC GND 120
121 SIG_DET N.C. 122
123 N.C. GND 124
125 PNLoN N.C. 126
127 GND GND 128
129 REC_MUTE N.C. 130
131 GND GND 132
133 N.C. N.C. 134
135 N.C. GND 136
137 GND AVCTXD 138
139 N.C. AVCRXD 140
141 N.C. AVCCTS_N 142
143 N.C. AVCRTS_N 144
145 N.C. GND 146
147 N.C. N.C. 148 SDCLK 1 1 SDCLK
149 N.C. N.C. 150 SDCMD 2 2 SDCMD
151 N.C. N.C. 152 GND 3 3 GND
153 N.C. N.C. 154 SDDAT0 4 4 SDDAT0
155 GND N.C. 156 SDDAT1 5 5 SDDAT1
157 N.C. N.C. 158 SDDAT2 6 6 SDDAT2
159 GND N.C. 160 SDDAT3 7 7 SDDAT3
+5.6V 8 8 +5.6V
SDCD 9 9 SDCD
SDWP 10 10 SDWP
GND 11 11 GND
D+3.3V 12 12 D+3.3V
V4_CY 1 1 V4_CY
GND 2 2 GND
V4_Y 3 3 V4_Y
GND 4 4 GND
V4_C 5 5 V4_C VBUS 31 1 VBUS
GND 6 6 GND VBUS 30 2 VBUS
V4_L 7 7 V4_L VBUS 29 3 VBUS
V4_R 8 8 V4_R GND 28 4 GND
GND 9 9 GND D+ 27 5 D+
T+9V 10 10 T+9V D- 26 6 D-
PWRKEY 11 1 PWRKEY GND 25 7 GND
ADKEY0 12 2 ADKEY0 +3.3V 24 8 +3.3V
ADKEY1 13 3 ADKEY1 +5V 23 9 +5V
GND 14 4 GND WP 22 10 WP
HPD 21 11 HPD
DDCPOW 20 12 DDCPOW
GND 19 13 GND
SDA 18 14 SDA
SCL 17 15 SCL
ACK 16 16 ACK
GND 15 17 GND
Clock- 14 18 Clock-
Clock+ 13 19 Clock+
GND 12 20 GND
iR_iN 1 1 iR_iN Data0- 11 21 Data0-
STBY+3.3V 2 2 STBY+3.3V Data0+ 10 22 Data0+
iR_CAPiN 3 3 iR_CAPiN GND 9 23 GND
GND 4 4 GND Data1- 8 24 Data1-
+5.6V 5 5 +5.6V Data1+ 7 25 Data1+
STBY+5V 6 6 STBY+5V GND 6 26 GND
ALARMLED0 7 7 ALARMLED0 Data2- 5 27 Data2-
PWRLED0 8 8 PWRLED0 Data2+ 4 28 Data2+
PWRLED1 9 9 PWRLED1 GND 3 29 GND
MLEDG_N 10 10 MLEDG_N CEC 2 30 CEC
MLEDR_N 11 11 MLEDR_N GND 1 31 GND
D+3.3V 80 1 D+3.3V 1 GND GND 2
SBADD13 79 2 SBADD13 3 +5.6V +5.6V 4
SBADD12 78 3 SBADD12 5 +5.6V +5.6V 6
SBADD11 77 4 SBADD11 7 +5.6V +5.6V 8
SBADD10 76 5 SBADD10 9 +5.6V +5.6V 10
SBADD9 75 6 SBADD9 11 +5.6V +5.6V 12
GND 74 7 PoD_Ari 13 GND GND 14
SBADD8 73 8 SBADD8 15 D+3.3V D+3.3V 16
SBADD7 72 9 SBADD7 17 GND GND 18
SBADD6 71 10 SBADD6 19 GND GND 20
SBADD5 70 11 SBADD5 21 GND GND 22
SBADD4 69 12 SBADD4 23 GND GND 24
SBADD3 68 13 SBADD3 25 RA1- TA1- 26
SBADD2 67 14 SBADD2 27 RA1+ TA1+ 28
SBADD1 66 15 SBADD1 29 GND GND 30
GND 65 16 GND 31 RB1- TB1- 32
SBDAT7 64 17 SBDAT7 33 RB1+ TB1+ 34
SBDAT6 63 18 SBDAT6 35 GND GND 36
SBDAT5 62 19 SBDAT5 37 RC1- TC1- 38
SBDAT4 61 20 SBDAT4 39 RC1+ TC1+ 40
SBDAT3 60 21 SBDAT3 41 GND GND 42
SBDAT2 59 22 SBDAT2 43 RCLK1- TCLK1- 44
SBDAT1 58 23 SBDAT1 45 RCLK1+ TCLK1+ 46
SBDAT0 57 24 SBDAT0 47 GND GND 48
SBoE_N 56 25 SBoE11_N 49 RD1- TD1- 50
SBWE_N 55 26 SBWE11_N 51 RD1+ TD1+ 52
SBBE0_N 54 27 SBBE0_N 53 GND GND 54
SBACK_N 53 28 SBACK_N 55 RE1- TE1- 56
GND 52 29 GND 57 RE1+ TE1+ 58
SBCLK_3 51 30 SBCLK_3 59 GND GND 60
RESET1_N 50 31 RESET1_N 61 RA2- TA2- 62
CoNF_PRoG 49 32 CoNF_PRoG 63 RA2+ TA2+ 64
CoNF_iNiT 48 33 CoNF_iNiT 65 GND GND 66
CoNF_DoNE 47 34 CoNF_DoNE 67 RB2- TB2- 68
GND 46 35 GND 69 RB2+ TB2+ 70
MCLKo 45 36 MCLKo 71 GND GND 72
GND 44 37 GND 73 RC2- TC2- 74
MDoD 43 38 MDoD 75 RC2+ TC2+ 76
MoVAL 42 39 MoVAL 77 GND GND 78
MoSTRT 41 40 MoSTRT 79 RCLK2- TCLK2- 80
CRXiN 40 41 CRXiN 81 RCLK2+ TCLK2+ 82
DRXiN 39 42 DRXiN 83 GND GND 84
GND 38 43 GND 85 RD2- TD2- 86
MPEG_PCLK 37 44 PoD_PCLK 87 RD2+ TD2+ 88
GND 36 45 GND 89 GND GND 90
MPEG_PD7 35 46 MPEG_PD7 91 RE2- TE2- 92
MPEG_PD6 34 47 MPEG_PD6 93 RE2+ TE2+ 94
MPEG_PD5 33 48 MPEG_PD5 95 GND GND 96
MPEG_PD4 32 49 MPEG_PD4 97 GND CPUSEL 98
MPEG_PD3 31 50 MPEG_PD3 99 SBCLK_2 SBADD1 100
MPEG_PD2 30 51 MPEG_PD2 101 GND SBADD2 102
MPEG_PD1 29 52 MPEG_PD1 103 SBCE6c_N SBADD3 104
MPEG_PD0 28 53 PoD_PD0 105 SBWE_N SBADD4 106
MPEG_PEN 27 54 PoD_PEN 107 SBoE_N SBADD5 108
MPEG_PSYNC 26 55 PoD_PSYNC 109 SBDAT0 SBADD6 110
GND 25 56 GND 111 SBDAT1 SBADD7 112
PLL_66M 24 57 PLL_66M 113 SBDAT2 SBADD8 114
GND 23 58 GND 115 SBDAT3 SBADD9 116
SBCE6a_N 22 59 SBCE6a_N 117 SBDAT4 SBADD10 118
SBCE7_N 21 60 SBCE7_N 119 SBDAT5 SBADD11 120
PoD_CD_N 20 61 PoD_CD_N 121 SBDAT6 SBADD12 122
iREQ_N 19 62 iREQ_N 123 SBDAT7 SBADD13 124
PG_+5.6V 18 63 PG_+5.6V 125 RESET2_N EXTLD 126
PNLoN 17 64 PNLoN 127 FCoNT PBLK 128
SDDAT3 16 65 SDDAT3 129 FPHASE GND 130
SDDAT2 15 66 SDDAT2 131 PC_SEL SCL1_3V_100 132
SDDAT1 14 67 SDDAT1 133 PC_RST SDA1_3V_100 134
SDWP 13 68 SDWP 135 GND GND 136
SDDAT0 12 69 SDDAT0 137 PLL_27M_FC8 PoWER_2_Td 138
SDCD 11 70 SDCD 139 GND GND 140
SDCMD 10 71 SDCMD 141 TELEROCK VSYNC 142
GND 9 72 GND 143 AUDiooUT AUDioiN 144
SDCLK 8 73 SDCLK 145 LRCKoUT LRCKiN 146
GND 7 74 GND 147 BiToUT BiTiN 148
6 75 149 MoDE0 MODE1 150
+5.6V 5 76 +5.6V 151 FRC0 FRC1 152
+5.6V 4 77 +5.6V 153 FRC2 FRC3 154
+5.6V 3 78 +5.6V 155 FRC4 FRC5 156
+5.6V 2 79 +5.6V 157 FRC6 FRC7 158
+5.6V 1 80 +5.6V 159 FRC8 FRC9 160
CN23
VH-10P
CN64
VH-10P
Power Supply Unit PDP Module
CONNECTION DIAGRAM
Main Digital board
CN63
EH-8P
TERMINAL PWB
PPM1
ZH-08H
PSM
501497-160VS
PFA1
ZH-03H
FAN
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
PPM2
DF3D-15H
PPM2
DF3D-15H
PPM2
DF3D-15H
PPM3
PA-6V
PMS1
501493-160VP
CONTROL PWB
PCST
GH-14V
CONTROL PWB
PCST
GH-14V
PTF
ZH-13H
PSC
GH-04H
PTF
ZH-13H
PTC
GH-10V
LED PWB
PLS
501331-11V
LED PWB
PLS
501331-11V
PA01
501786-8011
PSL
501568-11H
CN61
VT-2P
PFAC
VT-2P
EC01
FI-RE51S
CN1
FI-RE51S
PH01
FIR-31V
P403
FIR-31H
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
PDS
501331-12V
PSD
501568-12H
P403
FI-RE31S
PH01
FI-RE31S
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
CNPPS
EH-15P
PPM2
DF3D-15H
PSD
501568-12H
PDS
501331-12V
SD PWB SD PWB
PSPK
PA-04V
Speaker (L)
Speaker (R)
PPU1
VT-2P
FILTER PWB AC INLET
PTW
53290-05VP-D
PWT
52418-05HS-D
SWIVEL PWB
PTW
53290-05VP-D
PWT
52418-05HS-D
SWIVEL PWB
PFA2
ZH-03H
FAN
PFB1
ZH-04H
FAN
PFB2
ZH-04H
FAN
CN8
PH-9P
CN68
PH-9P
PW01
501864-8090
PA01
501786-8090
POD PWB
PMF1
501497-160VS
P602
501493-160VP
FC8 PWB
TABLE OF CONTENTS
FINAL WIRING DIAGRAM
FOR P50V701 AND P50S601
DW3
9
TABLE OF CONTENTS
FINAL WIRING DIAGRAM
P50X901
DW3
10 TABLE OF CONTENTS
POWER UNIT, FAN ASSY(P50S601, P50V701, P50X901)
Remove Screw M3M 3*8 P#MJ03598( 4 pcs.) Remove Screw M3D 4*10 P#MJ03895( 2 pcs.)
Screw M3E 3*8 P#MJ03963( 2 pcs.) Screw M3D 4*10 P#MJ04067( 2 pcs.)
Panel fan Ass'y
Remove Power Unit P#HA02202
Remove Screw M3D 4*10 P#MJ04067( 2 pcs.)
Remove Screw M3M 3*8 P#MJ03598( 3 pcs.)
Power Fan Ass'y Remove Fan P#GS00697( 2 pcs.)

Remove Screw M3D 4*10 P#MJ03895( 2 pcs.)
Remove Fan P#GS00696( 2 pcs.)
TABLE OF CONTENTS
DW3D, DW3F
11
PANEL FAN ASS'Y DETAIL
METAL COVER
CUSHION
SUPPORT METAL
PANEL FAN ASS'Y
SUPPORT
METAL
POWER FAN ASS'Y
POWER FAN ASS'Y DETAIL
SUPPORT METAL
METAL COVER
FERRITE
CORE ASS'Y
QUICK DISASSEMBLE GUIDE(These two pages show diffrential points from H/T Models, other pages are common)
CHASSIS ASS'Y 2(P50V701, P50X901 ONLY)
Remove Screw M3E 3*8 P#MJ03467( 2 pcs.)
Remove Screw M3E 3*8 P#MJ03963( 2 pcs.)
Remove POD PWB ASS'Y P#JP55141
Remove Screw M3E 3*8 P#MJ03467( 2 pcs.)

Remove FC8 PWB ASS'Y P#JP56845
12
DW3D
TABLE OF CONTENTS
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
NOTES 1 of 1
NOTES
TABLE OF CONTENTS
13
NOTES ABOUT THE SCHEMATICS.

The schematic drawings included in this service manual addendum are:

Refer to the service manual PA no. 0224 for the next additional schematic drawings:
1. Control board (for P50X901, P50V701 and P50S601)
2. SD board (for P50X901, P50V701 and P50S601)
4. LED board for P50S601
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
SWIVEL 1 of 1
SWIVEL
NOTES ABOUT THE SCHEMATICS
14
For P50X901, P50V701 and P50S601
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
FILTER 1 of 1
FILTER
NOTES ABOUT THE SCHEMATICS
15
For P50X901, P50V701 and P50S601.
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 1 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
16
For P50S601 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 2 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
17
For P50S601 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 3 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
18
For P50S601 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 4 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
19
For P50S601 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 5 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
20
For P50S601 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 1 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
21
For P50X901 and P50V701 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 2 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
22
For P50X901 and P50V701 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 3 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
23
For P50X901 and P50V701 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 4 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
24
For P50X901 and P50V701 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
TERMINAL 5 of 5
TERMINAL
NOTES ABOUT THE SCHEMATICS
25
For P50X901 and P50V701 only
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
LED 1 of 1
LED
NOTES ABOUT THE SCHEMATICS
26
For P50X901 and P50V701 only. Refer to PA no. 0224 for the P50S601.
PRODUCT SAFETY NOTE: Components marked with a ! and shaded have special characteristics
important to safety. Before replacing any of these components, read carefully the PRODUCT SAFETY
NOTE of this Service Manual. Don't degrade the safety of the receiver through improper servicing.

Since this is a basic circuit diagram, the value of the parts is subject to be altered for improvement.
1 2 3 4 5 6
A
B
C
D
E
BASIC CIRCUIT DIAGRAM
DW3U
POD 1 of 1
POD
NOTES ABOUT THE SCHEMATICS
27
For P50X901 and P50V701 only
DD00941 FPF50C240135UA-55 DD00941 FPF50C240135UA-55 DD00941 FPF50C240135UA-55
EK01933 WIRE (PROCESSED) JF04R0R021970 EF27632 CONNECTOR CABLE CO-51C-C0R5S40 EK01901 80P FFC CABLE L=***MM UL20861
EV01841 POWER CORD 125V10A UL/CSA EK01901 80P FFC CABLE L=***MM UL20861 EP00411 AC INLET SK-1015(F1-0)
EW08433 8P PLUG CODE L=350MM EK01933 WIRE (PROCESSED) JF04R0R021970 EV01841 POWER CORD 125V10A UL/CSA
FPF38R-XBD54621 XBUS (D) EP00411 AC INLET SK-1015(F1-0) EW08433 8P PLUG CODE L=350MM
FPF38R-XBU54611 XBUS (U) EV01841 POWER CORD 125V10A UL/CSA FPF38R-XBD54621 XBUS (D)
FPF38RADM019F03 ADM EW08433 8P PLUG CODE L=350MM FPF38R-XBU54611 XBUS (U)
FPF41R-ABA56061 ABUS (A) EY01641 IR MOUSE CABLE FPF38RADM019F03 ADM
FPF41R-ABB56071 ABUS (B) FPF38R-XBD54621 XBUS (D) FPF41R-ABA56061 ABUS (A)
FPF41R-ABC56081 ABUS FPF38R-XBU54611 XBUS (U) FPF41R-ABB56071 ABUS (B)
FPF41R-CBL02381 SIGNAL CABLE FPF38RADM019F03 ADM FPF41R-ABC56081 ABUS
FPF41R-CBL02382 SIGNAL CABLE FPF41R-ABA56061 ABUS (A) FPF41R-CBL02381 SIGNAL CABLE
FPF41R-CBL02383 SIGNAL CABLE FPF41R-ABB56071 ABUS (B) FPF41R-CBL02382 SIGNAL CABLE
FPF41R-CBL02384 SIGNAL CABLE FPF41R-ABC56081 ABUS FPF41R-CBL02383 SIGNAL CABLE
FPF41R-CBL02385 SIGNAL CABLE FPF41R-CBL02381 SIGNAL CABLE FPF41R-CBL02384 SIGNAL CABLE
FPF41R-CBL02386 SIGNAL CABLE FPF41R-CBL02382 SIGNAL CABLE FPF41R-CBL02385 SIGNAL CABLE
FPF41R-CBL27301 POWER CABLE FPF41R-CBL02383 SIGNAL CABLE FPF41R-CBL02386 SIGNAL CABLE
FPF41R-CBL27311 POWER CABLE FPF41R-CBL02384 SIGNAL CABLE FPF41R-CBL27301 POWER CABLE
FPF41R-CBL27312 POWER CABLE FPF41R-CBL02385 SIGNAL CABLE FPF41R-CBL27311 POWER CABLE
FPF41R-CBL27313 POWER CABLE FPF41R-CBL02386 SIGNAL CABLE FPF41R-CBL27312 POWER CABLE
Not Replaceable LOGIC Board FPF41R-CBL27301 POWER CABLE FPF41R-CBL27313 POWER CABLE
FPF41R-XSS56421 XSUS Board FPF41R-CBL27311 POWER CABLE FPF41R-LGC54681 LOGIC Board
FPF41R-YSS56431 YSUS Board FPF41R-CBL27312 POWER CABLE FPF41R-XSS56421 XSUS Board
GK01652 SPEAKER-04X15D FPF41R-CBL27313 POWER CABLE FPF41R-YSS56431 YSUS Board
GS00697 DC MOTOR:DC2406KL-04W-B29-T0E FPF41R-XSS56421 XSUS Board GS00696 DC MOTOR:DC2406KL-04W-B29-T0E
HA02202 POW-MPF7726 FPF41R-YSS56431 YSUS Board GS00697 DC MOTOR:DC2406KL-04W-B29-T0E
HL02403 REMOTE CONTROL UNIT CLU-4373A GK01652 SPEAKER-04X15D HA02202 POW-MPF7726
JP55124 DW3F TERMINAL PWB (SUB-DIGI) GS00696 DC MOTOR:DC2406KL-04W-B29-T0E HL01864 RCT- CLU123S
JP55134 DW3 FILTER PWB GS00697 DC MOTOR:DC2406KL-04W-B29-T0E HL02402 REMOTE CONTROL UNIT CLU-4372A
UX28027 PSA DW3-C MAIN-DIG. GX00731 MAGNET K5CRC12X15X7-MG2 UX28029 PSA DW3-D MAIN-DIG.
KS22255 50SC01MRT_EM41%VE_F.FILTER HA02202 POW-MPF7726 JP56845 PSA FC8 (DW3 US)
PC07042 DW2 POWER BUTTON ASS Y HL02404 REMOTE CONTROL UNIT CLU-4374A KS22256 50SC01MRT_EM36%LVE_F.FILTER
PC07071 DW3 POW BTN-50 SHAFT JP55141 DW3 POD PWB MF02414 GASKET 10-2-40 J1G
PH40153 DW2 FR CONT KEY US UX28028 PSA DW3-D MAIN-DIG. NA88102 DW3 50US BEZEL FRAME BOTTOM
PH41211 DW3 CONT PLT 50U JP56845 PSA FC8 (DW3 US) NA90811 DW3 50US BEZEL FRAME R
PH41771 DW3 P50U SP GRILL R KS22254 50SC01MRT_EM36%VE_F.FILTER NA90812 DW3 50US BEZEL FRAME L
PH41772 DW3 P50U SP GRILL L PC07042 DW2 POWER BUTTON ASS Y NA91161 DW3 50US BEZEL FRAME TOP
PH41781 DW3 P50U CONTROL DOOR PH38111 DW2 PC CARD HOLDER NA91491 DW2 50 FAN COVER
PH43353 DW3 50TP2 DECO BEZEL PH38121 DW2 CARD COVER NA91961 DW2 50 KEY SUPPORT
PH43572 DW3_50US_SV_DOOR_SHEET PH40153 DW2 FR CONT KEY US NA93762 DW3 50XR MAIN FRAME
PH43771 DW3 50 SV SP-SHEET L PH41212 DW3 CONT PLT 50U 501 NA95813 DW3 50X-U FAN BS MTL
PH43772 DW3 50 SV SP-SHEET R PH41771 DW3 P50U SP GRILL R NA95852 DW3 50XR FAN BASE A2
PU00961 DW2 50 HITACHI BADGE PH41772 DW3 P50U SP GRILL L PC07042 DW2 POWER BUTTON ASS Y
QA03713 DW3 50US-X BACK COVER PH41781 DW3 P50U CONTROL DOOR PC07071 DW3 POW BTN-50 SHAFT
QD56864 P50S601 F-COSMETICS PH43353 DW3 50TP2 DECO BEZEL PH38111 DW2 PC CARD HOLDER
QJ03754 DW3 50 STAND ASSY U PU00961 DW2 50 HITACHI BADGE PH40153 DW2 FR CONT KEY US
QR71591 S601 INST. BOOK QA03713 DW3 50US-X BACK COVER PH41213 DW3 CONT PLT 50U 901
UE27036 DW3F CHASSIS ASSY QD56865 P50V701 F-COSMETICS PH43521 DW3 50 SIDE BEZEL R
QJ03754 DW3 50 STAND ASSY U PH43522 DW3 50 SIDE BEZEL L
QR71601 V701 INST. BOOK PM32521 DW3 50 AL DECO T (X)
UE27034 DW3D CHASSIS ASSY PM32531 DW3 50 AL DECO B (X)
QA03713 DW3 50US-X BACK COVER
QJ03754 DW3 50 STAND ASSY U
QR71581 X901 INST. BOOK
P50S601
Parts List
28
P50S601 / P50V701 / P50X901
P50V701 P50X901
GS00696 DC MOTOR: DC2406KL-04W-B29-T0E GK01652 SPEAKER-04X15D Not Replaceable LOGIC Board

29
DW3

FPF41R-ABC56081
ABUS-C PWB LOGIC PWB
NOT REPLACEABLE
FPF41R-ABB56071
ABUS-B PWB
FPF38R-XBD54621
XBUS-D PWB
FPF41R-XSS56421
X-SUS PWB
FPF38R-XBU54611
XBUS-U PWB
FPF41R-ABC56081
ABUS-C PWB
FPF41R-ABA56061
ABUS-A PWB
FPF38R-SDR54592
SDR-U PWB
FPF41R-YSS56431
Y-SUS PWB
FPF38R-SDR54602
SDR-L PWB
PART NUMBERS OF PANEL BOARDS
TABLE OF CONTENTS

30
DW3

Powercable
FPF41P-CBL27J11

FPF41P-CBLO2J84

FPF41P-CBL27J1J

FPF41P-CBLO2J8J

FPF41P-CBLO2J86

FPF41P-CBL27J12

FPF41P-CBLO2J86

FPF41P-CBL27J11

FPF41P-CBLO2J82

FPF41P-CBLO2J81

FPF41P-CBL27JO1
PART NUMBER OF PANEL CONNECTORS
TABLE OF CONTENTS
DW1
DW2
DW3 - T models
DW3 - H models
MENU + MENU + MENU + 8 + SELECT = Service Adj Mode (I2C Adjust)
MENU + MENU + MENU + 9 + SELECT = Panel Test Mode (see below)
Service Modes available to the technician (via remote only)
DW1 / DW2 / DW33
3. NAME and FUNCTION of each parts
3. 1 CONFIGURATION
3.1.1 Boards Configuration
FPF50C240135UA-55
3.1.2 CONNECTORS CONFIGURATION

CN27
CN23
CN22
CN21
CN26
CN65
CN64
CN66
CN63
CN62
CN61
CN01 CN02 CN03 CN04
CN05 CN06
CN07
CN01
CN02 CN03
CN04 CN05
CN08
CN06
CN07
CN07
CN01 CN02 CN03 CN04
CN05
CN06
CN06
CN05
CN01 CN02 CN03 CN04
CN31
CN32
CN35
CN34
CN831
CN832
CN833
CN821
CN822
CN823
CN06
CN04 CN03 CN02
CN05
ABUS- A ABUS- C
ABUS- C ABUS- B
XSUS
YSUS
LOGIC
XBUS- U
XBUS- D
SDR- U
SDR- D
TROUBLESHOOTING THE 50AF1 PANEL FOR THE FOLLOWING MODELS:
P50S601, P50V701, P50X901
32
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
3.2 Block Diagrams
3.2.1 Signal Diagrams

ADM ADM ADM ADM ADM ADM ADM ADM
ADM ADM ADM ADM ADM ADM ADM
ABUS-B B. ABUS-C B.
ABUS-B B. ABUS-C B.
X-SUS
EVEN SW
X-SCAN
EVEN SW
X-SUS
ODD SW
X-SCAN
ODD SW
POS
RESET
XSUS B.
XBUS B.
XBUS B.
S
D
R
-
U

B
.
S
D
R
-
D

B
.
Y-SUS
EVEN SW
Y-SCAN
EVEN SW
Y-SUS
ODD SW
Y-SCAN
ODD SW
POS/NEG
RESET
SW
YSUS B.
LVDS
DATA CONVERTER
Gamma
Gain
Error def.
Dither
Memory
Controller
Sub Field
Processor
SCAN CONTROLLER
MPU
TIMMING
ROM
EEPROM
D/A
Conv.
Vsync cont.
Serial comm.
Failure Det.
APC cont.
ANALOG
SW
PSU B.
LOGIC B.
Vcego
Vsago
Vrs
Vra
I
2
C
SIGNAL
INPUT
CN02 CN03 CN04 CN05
CN06
CN07
CN01
CN08
CN05 CN05
CN05 CN05
CN21
CN31
CN34
CN35
CN27
CN26
33
TROUBLESHOOTING THE 50AF1 PANEL
3.2.2 Power Supply Diagram
ADM ADM ADM ADM ADM ADM ADM ADM
ADM ADM ADM ADM ADM ADM ADM
ABUS-B B. ABUS-C B.
ABUS-B B. ABUS-C B.
X-SUS
EVEN SW
X-SCAN
EVEN SW
X-SUS
ODD SW
X-SCAN
ODD SW
POS
RESET
XSUS B.
S
D
R
-
U

B
.
S
D
R
-
D

B
.
Y-SUS
EVEN SW
Y-SCAN
EVEN SW
Y-SUS
ODD SW
Y-SCAN
ODD SW
POS/NEG
RESET SW
YSUS B.
MPU
Vcc
PFC
LOGIC B.
Vcego
Vsago
CN63/CN68
CN61
CN64
CN07 CN06
CN06 CN06
CN23
CN32
CN34
CN35
CN22
DC/DC
CONVERTER
Vs
89v
Va
65v
Vcc
5v
Vs 89v
Va 65v
Vcc 5v
DC/DC
CONVERTER
Vw
190v
Vey
16v
Vy
18v
Vex
16v
Vxx
16v
CN07
CN27
CN26
CN06
Va 65v
Vcc 5v
Va 65v
Vcc 5v
Va
Vs
CN08
Vcc 5v
D/A
Vrs,Vr
Vwgo
RESET
IC
YRST XRST
Vcego
Vsago Vra
Vsago Vrs
AC100-240v
PSU B.
Vs 89v
Va 65v
Vcc 5v
34
TROUBLESHOOTING THE 50AF1 PANEL
3.3 Function
3.3.1 Logic board Function
1) Data Processor
- Y adjustment
- NTSC/EBU format (Color Matrix) Switch
- RGB gain Control (White balance adjustment, Amplitude limitation)
- Error Diffusion Technology (Grayscale adjustment)
- Dither (Grayscale adjustment)
- Burn-in Pattern generation
- Streaking adjustment
2) Data Converter
3) Scan Controller - Address driver control signal generator (ADM)
- scan driver control signal generator (SDM)
- X / Y sustain control signal generator
4) Waveform ROM
5) MPU
- Synchronous detection
- System control
- Driving voltage(Va, Vs, Vw) minor adjustment
- Abnormal watch (breakdown detection)/abnormal processing
- Is(sustain) current control (sustain pulse control)
- Ia(address) current control (sub-field control / sustain pulse control)
- External communication control
- Flash memory (firmware)
6) EEPROM
- Control parameter memory
- The accumulation energizing time (Every hour).
- Abnormal status memory (16 careers)
Function of X-SUS Board
1) DC/DC power supply block - Va (+63V) -> Vx(-30V) / Vq (-55V)
- Vcc (+5V) -> Ve (+17V) / XFve (+18V, floating)
2) X switching block
- Switch circuit for address period
- Switch circuit for reset period
3) Current detector block - Isx (sustain) current detection
- Ia (address) current detection
4) Voltage detector block - Vs (sustain) voltage detection
- Va (address) voltage detection
FUNCTION OF Y-SUS BOARD
1) DC/DC power supply block - Vcc (+5V) -> Ve (+17V) / YFve (+18V, floating)
- Vs (+85V) -> Vw (200V)
2) Y switching block
- Switching for address period
- Switching for reset period
35
- Quasi out-line adjustment (luminous pattern control)
- Waveform Pattern for drive / Timing memory
- Switching for sustain period
- Switch circuit for sustain period
TROUBLESHOOTING THE 50AF1 PANEL
4.5 Fault Symptom (Note the Logic PWB is not replaceable, it is part of the Panel)
No Fault contents Fault status
Suspected fault
location
Analysis procedure
and measure
1
X-SUS, Y-SUS
PSU, Panel, LOGIC
ABUS-A, B, C
SDRU and SDRD
Replace defective PCB
2
LOGIC Panel Failure
3

PANEL
LOGIC
4
PANEL Panel Failure
5
multiplication width of screen.
PANEL
ABUS-A, B, C
LOGIC
And related connection
6
Vertical bar with 1/2
width of screen.
ABUS-A, B, C
LOGIC
And related connection
7
Single Horizontal line (Does not
light) or Single Horizontal line
does not light in entire screen
If connector OK, Panel
Panel Failure
8
Every other lines do not light in
entire screen
X-SUS
Y-SUS
9
Bar width of 1/8 of vertical size of
the screen does not light
SDR-U or D
10
Bar width of 1/2 vertical size of
the screen does not light.

Panel, SDRU and D
Y or X-SUS
And related
connections
11
12
13 The entire screen flickers continuously
14
15
16

LOGIC
Panel Failure
17
18 Luminance linearity is poor.
19
20
36
TROUBLESHOOTING THE 50AF1 PANEL
Make sure connector at
location from SDR
is correctly seated.
Make sure connector at
location from SDR
is correctly seated.
After momentarily lighting, the
light (No Picture)
screen becomes black
immediately or after a few
seconds.
(Main power is turned off.)
Screen does not show any
picture but lights dimly.
Entire screen does not
Single vertical line
Vertical line from middle of
Screen. Vertical line of
Different Color
Vertical Line
Vertical Bar
Horizontal Line
Horizontal Bar
Image sticking
(or Image retentions)
Twinkle
Flicker
Luminance is abnormal
Crominance is abnormal
Sync is disturbed
Picture is Distorted
PANEL
Panel Failure
Some steps of gradation
are skipped
Abnormal Sound
Control of external
communication is
abnormal.
It is unable to adjust Contrast, Chrominance
and gamma value.
LOGIC Panel Failure
LOGIC Panel Failure
POWER SUPPLY,
Find defective part by
watching and hearing, after
replace defective part.
X or Y-SUS, Cabinet
Luminance linearity is poor LOGIC
Panel Failure
Colors can not be displayed correctly LOGIC
Panel Failure
The entire screen momentarily becomes
brighter or darker.
Loose contact on
CN01 Connector
LOGIC PWB
Connector
Re-Connect cables
or replace defective cables
Judge after operation test
on full white display,
Replace Panel
PANEL
Text or Graphics
of any kind.
Fixed contents are always visible
Could be Top or Bottom. May be Bottom
May be Top
See Vertical Line
Troubleshooting Flowchart
See Vertical Line
Troubleshooting Flowchart
See "No Picture"
Troubleshooting Flowchart
There is an image, but it is not normal.
Syncronization is abnormal
Unusual Sound coming from inside the set.
Exchange SDR board
Vertical bar with 1/15 or its
Exchange X-SUS or Y-SUS
See Vertical Bar
Troubleshooting Flowchart
See Horizontal Bar
Troubleshooting Flowchart
4.5 FAILURE ANALYSIS PROCEDURE
4.5.1 "No Picture failure analysis procedure
The entire screen does not light.
PSU board STBY
(5V) exists?
Y
N
Y
Turn off the AC power.
Remove the following five power connectors
CN68, CN26 (X-SUS), CN32 (Y-SUS)
CNR3 (ABUSR), CNL 2 (ABUSL)
Turn off AC power.
Connect CN68 to LOGIC.
Turn on AC power
Remove CN68 and CN64
(on PSU Board)
PSU to LOGIC and X-SUS
N
Y
Turn off the AC Power,
End of analysis
STANDBY power supply
has abnormality
STANDBY power supply (MPU)
power supply system has
short-circuit.
Y
Switching circuit
(Power Supply) has a short-circuit.
X-SUS board
CN23 (3)-(4)

pins or
CN23 (8)-(6) pins or
CN22 (10)-(13)

pins
(1)
Turn on AC Power
X-SUS - Y-SUS X-SUS to PSU
Panel is
defective.
PSU board is
defective.
X-SUS board is
defective.
N
37
Main Power is turned Off
Pin 1 CN63
PSU board STBY
(5V) exists?
Pin 1 CN63
are shorted?
PANEL TROUBLESHOOTING FLOWCHARTS (50AF1) PANEL:
13
[XSUS - YSUS]
Vu
NC
Vcc
-Vs
-Vs
NC
GND
1
Vs
12
11
10
9
8
7
6
CN22
4
3
2
5
NC
GND
NC
Vs
NC
10
[XSUS - PSU]
2
5
GND
GND
Vcc
NC
GND
Vs
1
Va
9
8
7
6
4
3
CN23
Vs
NC
Vs
XSUS
A
N
A
L
Y
S
I
S
O
P
E
R
A
T
I
O
N
On Y-SUS board
CN32 (1)-(4)

pins or
CN32 (6)-(4) pins or
CN32 (8)-(10) pins or
CN32 (10)-(13) pins
shorted?
Y
Remove SDR from CN34
and CN35 on YSUS
Y
Y-SUS board is
defective.
N
Switching circuit (power
supply) has a short-circuit.
N
End of analysis
(2)
Y
N
Y
N
X-SUS board
is defective.
YSUS
CN32
4
3
2
5
NC
GND
NC
Vs
NC
1
Vs
13
12
11
10
9
8
7
6
[YSUS - XSUS]
Vcc
NC
Vx
-Vs
-Vs
NC
GND
Remove XBUS-U XBUS-D
Y
On X-BUS board
CN63 (1)-(9)
shorted?
(1)
SDR is defective.
On CN801 on SDRU,
or CN811 on SDRD,
check for short circuit in following pins?
(2)-(6), (20)-(24),
(28)-(30), (46)-(50)
On X-BUS board
CN63 (1)-(9)
shorted.
Remove the six XFPCs
(Disconnect CN61, CN62, CN63, CN64,
CN65 and CN66)
On X-BUS board
CN63 (1)-(9)
are shorted.
N
XBUS board is
defective.
Panel chassis
is defective
38
TROUBLESHOOTING THE 50AF1 PANEL
XFPCs (Ribbon connectos to Panel)
A
N
A
L
Y
S
I
S
O
P
E
R
A
T
I
O
N
Y
ABUSA board is defective.
N
Y
Power supply circuit
has short-circuit.
N
(2)
(3)
Y
ABUSB board is defective.
N
Y
ADM chip (COF) is defective
Power supply circuit has short-circuit.
N
Y
ABUS-C(U) board is defective.
N
N
End of analysis
Y
ABUS-C(D) board is defective.
N
Y
ABUSA board
CNL2 (14)-(19) pin or
CNL2 (14)-(15) pin are
shorted?
Remove ADM from connectors on
ABUSA, CN02, CN03 and CN04
ABUSA board
CN06 (1)-(3) pins or
CN06 (3)-(5) pins
are shorted?
ADM is defective
ABUSB board
CN06 (1)-(3) pins or
CN06 (3)-(5) pins
shorted?
Remove ADM from the
following four connectors.
CN02, CN03,CN04,CN05
ABUSB board
CN06 (1)-(3) pins or
CN06 (3)-(5) pins
are shorted?
ADM is defective
(Panel is defective)
ABUSC(U) board
CN06 (1)-(3) pins or
CN06 (3)-(5) pins
shorted?
Remove ADM from the following
four connectors on ABUSC(U),
CN02, CN03,CN04 and CN05
ABUSC(U) board
CN06 (1)-(3) pins or
CN06 (3)-(5) pins
shorted?
ABUSC(D) board
CN06 (1)-(3) pins or
CN06 (3)-(5) pins
shorted?
ABUSC(D) board
CN06 (1)-(3) pins or
CN06 (3)-(5) pins
shorted?
Remove ADM from the following
four connectors.
CN02, CN03,CN04 and CN05
39
TROUBLESHOOTING THE 50AF1 PANEL
ADM (Connector with COF attached)
COF COF
COF (Chip on Film)
Connector to ABUS PWB
(Panel is defective)
ADM chip (COF) is defective
ADM chip (COF) is defective
ADM is defective
(Panel is defective)
ADM chip (COF) is defective
ADM is defective
(Panel is defective)
Power supply circuit has short-circuit.
Power supply circuit has short-circuit.
A
N
A
L
Y
S
I
S
O
P
E
R
A
T
I
O
N
On PSU board
Vcc (5V), Vs(89V),
Va(65V) exists ?
N
Y
Connect CN23 (X-SUS), CN32 (Y-SUS),
and Turn on PDP
N
Y
(3)
N
On PSU board
Va (65V) exist?
Turn off AC power and remove ADMs from
following connectors CN01, CN02, CN03, CN04
ABUSC (D) board is defective.
Panel or X-SUS board or
Y-SUS board is defective.
In case that Vs Power system or Va Power system of
X-SUS or Y-SUS is defective, Vcc starts but goes down
in a few seconds.
Turn off AC power
Connect SDR U /D (with CN34 and CN35)
Turn on PDP
Turn off AC power.
Connect CN 26 (X-SUS).
Turn on Power
Turn off AC power.
Connect CN 06(ABUSB).
Turn on Power.
N
Y
(4)
Turn off AC power, End of analysis
N
On PSU board
Va (65V) exists ?
Y
Turn off AC power.
And remove ADMs from CN01, CN02, CN03,
and CN04. After that turn on PDP
N
Y
ABUSB board is defective.
Turn off AC power.
Connect CN 06(ABUSB).
Turn on Power.
Turn Off AC power and disconnect YFPC from
CN812, CN822, CN823, CN831, CN832, CN833,
and Turn on AC power
YFPC or Panel is defective
Panel Defective
SDR U or D board is
defective
On PSU board
Vcc (5V), Vs (89V),
Va (65V) exists ?
On PSU board
Vcc(5V), Vs (89V)
exists ?
On PSU board
Va(65V) exists ?
ADM is defective
(Panel is defective.)
On PSU board
Va (65V) exists ?
Y
40
TROUBLESHOOTING THE 50AF1 PANEL
N
Y
ADM is defective
(Panel is defective.)
Afterwards, turn on Power (Vsago)
A
N
A
L
Y
S
I
S
O
P
E
R
A
T
I
O
N
Turn off AC power, End of analysis
(4)
A
N
A
L
Y
S
I
S
O
P
E
R
A
T
I
O
N
N
On PSU board
Va (65V)
exists ?
Y
N
Y
ABUSC(U) board
is defective
ADM is defect ive
Turn off AC power.
Connect CN06 (ABUSA).
N
On PSU board
Va (65V)
exists ?
Y
Turn off AC power.
And remove ADMs from following connectors
CN02, CN03, CN04 (ABUSA)
N
Y
ABUSA board is
defective.
Turn off AC power.
Connect CNL2 (ABUSL).
(
No Recurrence )
On PSU board
Va (65V)
exists ?
Turn off AC power.
And remove ADMs from following connectors
CN01, CN02, CN03, CN04
On PSU board
Va (65V)
exists ?
ADM is defective
(Panel is defective.)
41
TROUBLESHOOTING THE 50AF1 PANEL
Afterwards, turn on Power (Vsago)
(Panel is defective.)
Turn on Power (Vsago)
Afterwards, turn on Power (Vsago)
Turn on Power (Vsago)
4.6.2"Vertical line/Vertical bar" failure analysis procedure
LOGIC board ABUS
board signal cable has
abnormal appearance?
Y
Y
N
N
Panel address has open circuit or
ADM IC chip is defective.
(Panel is defective.)
End of analysis
Y
Y
N
Vertical bar appears
like following figure
Panel, ABUSC (D) board or Signal
cable is defective.
Or loose contact of CN02 (LOGIC) or
CN05 (ABUSC)
Y
N
Heat-melted junction is defective
Tap lightly heat seal portion on ADM flexible cable
Any
changes?
Turn off AC power
Vertical line/Vertical bar
ADM is defective
(Panel is defective.)
ADM flexible cable
has abnormal
appearance?
Turn on PDP
Signal cable is defective
One vertical line ?
Analysis is over
a b c d e f g h i j k l m n o
42
TROUBLESHOOTING THE 50AF1 PANEL
ADM (Connector with COF attached)
COF COF
COF (Chip on Film)
Connector to ABUS PWB
COF COF
Ripped, torn, bent, unseated?
Ripped, torn, bent, unseated?
ADM contains (COF)
ADM IC is the (COF)
(Panel is defective.)
(1)
End of analysis
Turn off the AC
(1)
Y
N
Panel, ABUSB board,
or Signal cable is defective.
Or loose contact of CN03 (LOGIC) or
CN05 (ABUSB)
Y
N
Panel , ABUSA board,
or Signal cable is defective.
Or loose contact of CN05 (LOGIC) or
CN05 (ABUSB)
(3)
Vertical bar
appears like
Different Color
Of Vertical
Panel, ABUSC (U) board,
or Signal cable is defective.
Or loose contact of CN04 (LOGIC) or
CN05 (ABUSC)
a b c d e f g h i j k l m n o
Vertical bar
appears like
a b c d e f g h i j k l m n o
Y
N
a b c d e f g h i j k l m n o
Y
N
(2)
43
TROUBLESHOOTING THE 50AF1 PANEL
following figure ?
following figure ?
Vertical bar
appears like
following figure ?
line ?
(2)
Normal?
N
Y
Normal?
Turn off the main power.
Replace signal cables LOGIC ABUSC(D).
Turn on PDP.
Signal cable is defective
Normal?
Turn off the main power.
LOGIC PWB can not be replaced
Normal?
Panel may be defective
Turn off the main power.
Replace signal cables LOGIC ABUSC(D).
Turn on PDP
Normal? Signal cable is defective
ADM is defective.
(Panel is defective.)
Turn off the main power.
LOGIC pwb can not be replaced
Turn on PDP.
Panel may be
defective.
ADM is defective.
(Panel is defective.)
(3)
The vertical lines
are at the area of
a, e, e, or g?
Turn off the main power.
Replace ABUSC (D) board
Turn on PDP
ABUSC(D) board
is defective
N
Y
N
Y
(4)
(5)
Normal?
Turn off the main power.
Replace ABUSC (D) board
Turn on PDP
ABUSC(U) board
is defective
N
Y
N
Y
(6)
N
Y
N
Y
The vertical lines
are at the area of
b, d, f, or h?
a b c d e f g h i j k l m n o
44
TROUBLESHOOTING THE 50AF1 PANEL
a b c d e f g h i j k l m n o
ADM contains (COF)
ADM contains (COF)
Turn off the AC power and Analysis is over
Normal?
N
Y
Turn off the main power.
Panel Defective
Panel is
defective
Normal? Signal cable is defective
Turn off the main power.
Replace ABUSB board
Normal?
Normal?
Turn off the main power.
Replace ABUSB board
Turn on PDP.
Turn off the main power.
Replace signal cables LOGIC ABUSB.
Turn on PDP
Continue?
Turn off the main power.
Replace signal cables LOGIC ABUSA.
Turn off the main power.
Logic PWB can not be replaced
ABUSB board is defective
(Panel) may be defective
Signal cable is defective
(4) (5) (6)
The vertical lines
are at the area of
i, k, m or o?
N
Y
N
Y
ABUSB board is
defective
ADM is defective.
Panel is defective
N
Y
N
Y
N
Y
N
Y
ADM is defective.
(Panel is defective)
Panel is defective.
45
TROUBLESHOOTING THE 50AF1 PANEL
a b c d e f g h i j k l m n o
Turn PDP (Vcego available)
Normal ?
ADM contains (COF)
ADM contains (COF)
4.6.3 "Horizontal Bar" Problem analysis procedure
Normal?
Turn off the main power.
Replace X-SUS board
Turn on PDP
N
Normal?
Panel is
defective.
Y
End of analysis
Horizontal bar
Turn off the main power.
Replace X-SUS board
Replace Y-SUS board
Turn on the PDP
X-SUS board is
defective.
Y-SUS board is
defective.
Turn off the main power
N
Y
46
TROUBLESHOOTING THE 50AF1 PANEL
48
POWER SUPPLY REPLACEMENT INFORMATION HA02202
DW3D/F
If it becomes necessary to replace the Power Supply PWB HA02202, the Vs and Va voltage
pots MUST be placed in the CENTER of their rotation. Adjustments will be made Automatically.
CN99
Pin 1 Va
Pin 3 Gnd
Pin 2 Vs
Vs Adj
Va Adj
Heat Run Full White
1 Minute before Adjustment
The Logic PWB will make the
appropriate Vs/Va adjustments
shortly after power on.
Center the Pot
Center the Pot
VR380
VR580
VR251
VR151
DO NOT TOUCH
VR580 (Vs)
CNPPS
CN64
CN99
CN63 CN68
CN61
HA02202
VR380 (Va)
VR151 should be adjusted to the point when CNPPS connector Pin 1, 2 or 3 voltage is 5.65 V (+/-0.25V).
If the pots VR251 or VR151 are accidentally moved, please read below.
VR251 should be adjusted at the point when CNPPS connector Pin 13, 14 or 15 voltage is 15 V (+/- 0.5).