Vs 85hfrseries

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

VS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series

www.vishay.com
Vishay Semiconductors
Standard Recovery Diodes,
(Stud Version), 85 A
FEATURES
• High surge current capability
• Stud cathode and stud anode version
• Leaded version available
• Types up to 1600 V VRRM
• Designed and qualified for industrial level
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DO-5 (DO-203AB)
TYPICAL APPLICATIONS
• Battery chargers
PRIMARY CHARACTERISTICS • Converters
IF(AV) 85 A • Power supplies
Package DO-5 (DO-203AB) • Machine tool controls
Circuit configuration Single • Welding

MAJOR RATINGS AND CHARACTERISTICS


85HF(R)
PARAMETER TEST CONDITIONS UNITS
10 to 120 140 to 160
85 85 A
IF(AV)
TC 140 110 °C
IF(RMS) 133 133 A
50 Hz 1700 1700
IFSM A
60 Hz 1800 1800
50 Hz 14 500 14 500
I2t A2s
60 Hz 13 500 13 500
VRRM Range 100 to 1200 1400 to 1600 V
TJ -65 to +180 -65 to +150 °C

ELECTRICAL SPECIFICATIONS
VOLTAGE RATINGS
VRRM, MAXIMUM REPETITIVE VRSM, MAXIMUM NON-REPETITIVE IRRM MAXIMUM
VOLTAGE
TYPE NUMBER PEAK REVERSE VOLTAGE PEAK REVERSE VOLTAGE AT TJ = TJ MAXIMUM
CODE
V V mA
10 100 200
20 200 300
40 400 500
VS-85HF(R) 60 600 700 9
VS-86HF(R)
80 800 900
VS-87HF(R)
VS-88HF(R) 100 1000 1100
120 1200 1300
140 1400 1500
4.5
160 1600 1700

Revision: 25-Nov-2022 1 Document Number: 95802


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series
www.vishay.com
Vishay Semiconductors

FORWARD CONDUCTION
85HF(R)
PARAMETER SYMBOL TEST CONDITIONS UNITS
10 to 120 140/160
Maximum average forward current 85 A
IF(AV) 180° conduction, half sine wave
at case temperature 140 110 °C
Maximum RMS forward current IF(RMS) 133 A
t = 10 ms No voltage 1700
Maximum peak, one-cycle forward, t = 8.3 ms reapplied 1800
IFSM A
non-repetitive surge current t = 10 ms 100 % VRRM 1450
t = 8.3 ms reapplied Sinusoidal half wave, 1500
t = 10 ms No voltage initial TJ = TJ maximum 14 500
t = 8.3 ms reapplied 13 500
Maximum I2t for fusing I2t A2s
t = 10 ms 100 % VRRM 10 500
t = 8.3 ms reapplied 9400
Maximum I2√t for fusing I2√t t = 0.1 ms to 10 ms, no voltage reapplied 145 000 A2√s
Value of threshold voltage
0.68
(up to 1200 V)
VF(TO) TJ = TJ maximum V
Value of threshold voltage
0.69
(for 1400 V, 1600 V)
Value of forward slope resistance
1.62
(up to 1200 V)
rf TJ = TJ maximum mW
Value of forward slope resistance
1.75
(for 1400 V, 1600 V)
Maximum forward voltage drop VFM Ipk = 267 A, TJ = 25 °C, tp = 400 μs rectangular wave 1.2 1.4 V

THERMAL AND MECHANICAL SPECIFICATIONS


85HF(R)
PARAMETER SYMBOL TEST CONDITIONS UNITS
10 to 20 140 to 160
Maximum junction operating and
TJ, TStg -65 to +180 -65 to +150 °C
storage temperature range
Maximum thermal resistance,
RthJC DC operation 0.35
junction to case
K/W
Maximum thermal resistance,
RthCS Mounting surface, smooth, flat and greased 0.25
case to heatsink
Maximum shock (1) 1500
Maximum constant vibration (1) 50 Hz 20 g
Maximum constant acceleration (1) Stud outwards 5000
Not lubricated thread, tighting on nut 3.4 (30)
Maximum allowable mounting torque Lubricated thread, tighting on nut 2.3 (20) N·m
+ 0 %, - 10 % Not lubricated thread, tighting on hexagon 4.2 (37) (lbf · in)
Lubricated thread, tighting on hexagon 3.2 (28)
17 g
Approximate weight Unleaded device
0.6 oz.
Case style See dimensions - link at the end of datasheet DO-5 (DO-203AB)
Notes
(1) Available only for 88HF
(2) Recommended for pass-through holes
(3) Recommended for holed threaded heatsinks

Revision: 25-Nov-2022 2 Document Number: 95802


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series
www.vishay.com
Vishay Semiconductors

ΔRthJC CONDUCTION
CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS
180° 0.10 0.08
120° 0.11 0.11
90° 0.13 0.13 TJ = TJ maximum K/W
60° 0.17 0.17
30° 0.26 0.26
Note
• The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
Maximum Allowable Case Temperature (°C)

1 80 150
85HF(R) Series 100 V to 1200 V 85HF(R) Series (1400 V to 1600 V)
RthJC (DC) = 0.35 K/W RthJC (DC) = 0.35 K/W

Maximum Allowable Case


1 70 1 40

Temperature (°C)
Conduction Angle Conduction Angle
1 60 1 30

1 50 1 20

30° 30°
60° 1 10 60°
1 40 90° 90°
120° 120°
180°a 180°
1 30 1 00
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100

IF(AV) - Average Forward Current (A) Average Forward Current (A)

Fig. 1 - Current Ratings Characteristics Fig. 3 - Current Ratings Characteristics


Maximum Allowable Case Temperature (°C)

180 150
85HF(R) Series 100 V to 1200 V 85HF(R) Series (1400 V to 1600 V)
RthJC (DC) = 0.35 K/W RthJC (DC) = 0.35 K/W
Maximum Allowable Case

170 140
Temperature (°C)

Conduction Period Conduction Period


160 130

150 120
30° 30°
60° 60°
140 90° 110 90°
120° 120°
180° DC 180° DC
130 100
0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140

IF(AV) - Average Forward Current (A) Average Forward Current (A)

Fig. 2 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics

Revision: 25-Nov-2022 3 Document Number: 95802


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series
www.vishay.com
Vishay Semiconductors

90
180°

0.

Rt
1.

K/
120°

7
80 5

hS
W

K/
Maximum Average Forward
90° K/

A
W

=0
70 60° 2K
/W

.5
30°
Power Loss (W)

K/
60

W
RMS Limit 3K

-D
50 /W

elt
a
40

R
5 K/
Conduction Angle W
30

20 10 K/W
85HF(R) Series 100 V to 1200 V
10 Tj = 180˚C
0
0 10 20 30 40 50 60 70 80 90 20 40 60 80 100 120 140 160 180

IF(AV) - Average Forward Current (A) Maximum Allowable Ambient Temperature (°C)

Fig. 5 - Forward Power Loss Characteristics

120
DC

0.

Rt
180°

hS
Maximum Average Forward

K/
100 120° K

A
W
/W

=
90°

0.
1.5

5
60° K/
Power Loss (W)

K/
80 30° W

W
2K

-D
/W

elt
60 RMS Limit

a
3K

R
/W
40 Conduction Period 5 K/W

20 85HF(R) Series 100 V to 1200 V 10 K/W


Tj = 180˚C
0
0 20 40 60 80 100 120 140 20 40 60 80 100 120 140 160 180

IF(AV) - Average Forward Current (A) Maximum Allowable Ambient Temperature (°C)

Fig. 6 - Forward Power Loss Characteristics


Maximum Average Forward Power Loss (W)

100
180°
0.

90 120°
R th

1
7

K/
K/

90°
SA

W
W

80
=

60°
0.

1.5
5

70 30° K/
K/

W
W

2K
-D

60 RMS Limit /W
elt
a

50
R

3K
/W
40
Conduction Angle 5 K/W
30
20 10 K/W
85HF(R) Series (1400 V, 1600 V)
10 Tj = 150 ˚C
0
0 10 20 30 40 50 60 70 80 90 25 50 75 100 125 150

Average Forward Current (A) Maximum Allowable Ambient Temperature (°C)


Fig. 7 - Forward Power Loss Characteristics

Revision: 25-Nov-2022 4 Document Number: 95802


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series
www.vishay.com
Vishay Semiconductors

Maximum Average Forward Power Loss (W)


1 40
DC
180°
1 20

R th
120° 0.7

SA
90° K/

=
W

0.
1 00 60°

5
1K

K
/W
30° /W

-
80

D
el
1.5

ta
K/W

R
60 RMS Limit 2 K/
W
Conduction Period 3 K/W
40
5 K/W
85HF(R) Series
20 (1400 V, 1600 V) 10 K/W
Tj = 150 ˚C
0
0 20 40 60 80 100 120 140 25 50 75 100 125 150

Average Forward Current (A) Maximum Allowable Ambient Temperature (°C)


Fig. 8 - Forward Power Loss Characteristics
Peak Half Sine Wave Forward Current (A)

1600 10 000

Instantaneous Forward Current (A)


At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
1400 Initial Tj = Tj Max. Tj = 25°C
@ 60 Hz 0.0083 s
Tj = Tj Max.
@ 50 Hz 0.0100 s
1200 1000

1000

800 100
85HF(R) Series
600 85HF(R) Series up to 1200 V

400 10
1 10 100 0 1 2 3 4 5 6
Number Of Equal Amplitude
Half Cycle Current Pulses (N) Instantaneous Forward Voltage (V)

Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 11 - Forward Voltage Drop Characteristics
Peak Half Sine Wave Forward Current (A)

1800 1000
Instantaneous Forward Current (A)

Maximum Non Repetitive Surge Current


1600 Versus Pulse Train Duration.
Initial Tj = Tj Max. Tj = Tj Max.
No Voltage Reapplied
1400
Rated Vrrm Reapplied
100
1200

1000
Tj = 25 °C
800
10
600
85HF (R) Series
400 85HF(R) Series

200 1
0.01 0.1 1 0 0.5 1 1.5 2 2.5

Pulse Train Duration (s) Instantaneous Forward Voltage (V)

Fig. 10 - Maximum Non-Repetitive Surge Current Fig. 12 - Forward Voltage Drop Characteristics
(for 1400 V, 1600 V)

Revision: 25-Nov-2022 5 Document Number: 95802


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-85HF(R), VS-86HF(R), VS-87HF(R), VS-88HF(R) Series
www.vishay.com
Vishay Semiconductors

ZthJC - Transient Thermal Impedance (K/W)


10
Steady State Value
RthJC = 0.35 K/W
1 (DC Operation)

0.1

0.01

85HF(R) Series

0.001
0.0001 0.001 0.01 0.1 1 10

t - Square Wave Pulse Duration (s)

Fig. 13 - Thermal Impedance ZthJC Characteristics

ORDERING INFORMATION TABLE

Device code VS- 85 HF R 160 M

1 2 3 4 5 6

1 - Vishay Semiconductors product


2 - 85 = standard device
86 = not isolated lead
87 = isolated lead with silicone sleeve
(red = Reverse polarity)
(blue = Normal polarity)
88 = type for rotating application
3 - HF = standard diode
4 - None = stud normal polarity (cathode to stud)
R = stud reverse polarity (anode to stud)
5 - Voltage code x 10 = VRRM (see Voltage Ratings table)
6 - None = stud base DO-5 (DO-203AB) 1/4" 28UNF-2A
M = stud base DO-5 (DO-203AB) M6 x 1 (not available for 88HF)
M8 = stud base DO-5 (DO-203AB) M8 x 1.25 (not available for 88HF)

LINKS TO RELATED DOCUMENTS


Dimensions www.vishay.com/doc?95342

Revision: 25-Nov-2022 6 Document Number: 95802


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
DO-5 (DO-203AB) for 85HF(R), 86HF(R) and 88HF(R)Series
DIMENSIONS FOR 85HF(R) SERIES in millimeters (inches)

Ø 15.1 (0.59)

6.1/7
(0.24/0.27)

4 (0.16)

4 (0.16) MIN.

25.4 (1) MAX.

10.8 (0.42)
11.4 (0.45)

11.1 ± 0.4
(0.44 ± 0.02)

1/4" 28UNF-2A
For metric devices: M8 x 1.25
M6 x 1

1.20 (0.04) 17.35 (0.68)

Revision: 20-Nov-2018 1 Document Number: 95342


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
DIMENSIONS FOR 86HF(R) SERIES in millimeters (inches)

12.2 (0.48) MAX.

Ø 7 (0.28) MAX.

123 (4.84)
MAX.
134.4 (5.29)
MAX.

Revision: 20-Nov-2018 2 Document Number: 95342


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
DIMENSIONS 88HF(R) SERIES in millimeters (inches)

Ø 15 (0.59)

7 (0.27)

8.3 (0.33) max.


3.8 (0.15)

4 (0.16) min.
25.4 (1) max.

10.8 (0.42)
11.4 (0.45)
5 (0.20) max.
(0.44 ± 0.02)
11.1 ± 0.4

1/4" 28 UNr - 2A
17.35 (0.68)
2.15 (0.08)

Revision: 20-Nov-2018 3 Document Number: 95342


For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

Revision: 01-Jan-2023 1 Document Number: 91000

You might also like