Scribd
Upload
24 views

BCCN

The test will be one hour long with a maximum of 30 marks. Questions will be from Unit 1, 2, and 3, with 10 marks for each unit. The performance on this test will be considered for assessing term work.

Uploaded by

Fungsūk Wangdú
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

BCCN

The test will be one hour long with a maximum of 30 marks. Questions will be from Unit 1, 2, and 3, with 10 marks for each unit. The performance on this test will be considered for assessing term work.

Uploaded by

Fungsūk Wangdú
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

SE-IT-IX - BCN - Unit Test - 1 - AY-2021-22 

(Copy)
SUBMIT THE TEST BEFORE THE DUE TIME

The duration of the test will be one hour & maximum marks will be 30.

The performance of the test will be considered while assessing the term work.

Questions asked are from UNIT - I, II, III (10 Marks each)

Hi, Anurag. When you submit this form, the owner will see your name and email address.

* Required

1. If a signal changes instantaneously, its frequency is *


(1 Point)

Zero

infinite

One

None of the above

2. Analog data are continuous and take discrete values *


(1 Point)

True

False

3. If a periodic signal is decomposed into five sine waves with frequencies of 100,
300, 500, 700, and 900 Hz, what is its bandwidth?
*
(1 Point)

500 Hz
800 Hz

600 Hz

300 Hz

4. Positive voltage for one symbol and negative for the other *
(1 Point)

NRZ-L

NRZ-I

None of the above

5. How many voltage values are used by Return to Zero (RZ) scheme? *
(1 Point)

Two

Three

Four

Five

6. According to the Nyquist theorem, the sampling rate must be *


at least 2 times the highest frequency contained in the signal
(1 Point)

True

False

7. The staircase maker is a block of *


(1 Point)
PCM

DM

DPCM

None of the above

8. Digital-to-analog conversion can be accomplished by *


(1 Point)

ASK

FSK

PSK

All of the above

9. When a signal travels through a medium it loses energy overcoming the


resistance of the medium. It is called as
*
(1 Point)

Attenuation

Distortion

Noise

10. Which layer translate, encrypt & compress data? *


(1 Point)

Network Layer

Transport Layer

Presentation Layer
Application Layer

11. To detect or correct errors, we need to send extra (redundant) bits with data *
(1 Point)

True

False

12. To guarantee the detection of up to s errors in all cases, the minimum Hamming
distance in a block code must be
*
(1 Point)

s-1

s+1

2s+1

13. In a cyclic code, *

If s(x) ≠ 0
(1 Point)

one bit is corrupted.

one or more bits is corrupted.

None of the above

14. In Checksum, the message is divided into *


(1 Point)

8-bit words
16-bit words

32-bit words

None of the above

15. The end of the frame and the beginning of the frame comes in *
(1 Point)

Fixed-size Framing

Variable-size Framing

16. Byte stuffing is the process of adding 1 extra byte whenever there is a flag or
escape character in the text
*
(1 Point)

True

False

17. DLL prepares a frame for transport across the local media by encapsulating it
with a header and trailer
*
(1 Point)

True

False

18. ________________ coordinates the amount of data that can be sent before
receiving acknowledgment.
*
(1 Point)

Flow control
Error control

None of the above

19. In which ARQ, we can send up to W frames before worrying about ACKs *
(1 Point)

Stop-and-Wait

Go-Back-N ARQ

Selective Repeat ARQ

20. Which among the following represents the objectives/requirements of the Data
Link Layer?
*
(1 Point)

Frame Synchronization

Error & Flow Control

Both a & b

None of the above

21. Which contention protocol is to wait a random time and try again when the
carrier is quiet. If still quiet, then transmit
*
(1 Point)

CSMA

CSMA/CD

CSMA/CA

None of the above


22. In the _________ method, after the station finds the line idle, it sends its frame
immediately. If the line is not idle, it continuously senses the line until it finds it
idle.
*
(1 Point)

nonpersistent

1-persistent

p-persistent

None of the above

23. In _______ methods, the stations consult one another to find which station has
the right to send.
*
(1 Point)

Random access

Controlled access

Channelization

None of the above

24. In the _______ method, the primary device controls the link; the secondary
devices follow its instructions.
*
(1 Point)

Reservation

Polling

Token passing

None of the above


25. _______ is based on coding theory and uses sequences of numbers called chips. *
(1 Point)

FDMA

TDMA

CDMA

None of the above

26. Each station on an Ethernet network has a unique _______ address imprinted on
its network interface card (NIC).
*
(1 Point)

5-byte

32-bit

48-bit

16-bit

27. _________ uses thick coaxial cable. *


(1 Point)

10Base5

10Base2

10Base-T

10Base-F

28. Which protocol is used in ETHERNET? *


(1 Point)
ALOHA

Binary Count down

CSMA/CD

Multiple Access Protocol

29. Fast Ethernet has a data rate of ________Mbps. *


(1 Point)

10

100

1000

10,000

30. _____ transmission technology (based on Ethernet) provides a data rate of 1


billion bits per second.
*
(1 Point)

10BASE-T Ethernet

Standard Ethernet

Fast Ethernet

Gigabit Ethernet

Send me an email receipt of my responses

Submit

This content is created by the owner of the form. The data you submit will be sent to the form owner. Microsoft is
not responsible for the privacy or security practices of its customers, including those of this form owner. Never
give out your password.

Powered by Microsoft Forms | Privacy and cookies | Terms of use

You might also like