Fema577 Design Guide

Risk Management Series
Design Guide
for Improving Hospital Safety
in Earthquakes, Floods, and High Winds
FEMA 577 / June 2007
FEMA
About the Cover
Olive View Hospital Replacement Fares Well In 1994 Quake
The new Olive View hospital building shown on the cover performed well during the 1994
Northridge earthquake. This quake, of the same magnitude as the 1971 San Fernando Earthquake
that nearly collapsed the original building,
caused no serious damage. Built in 1970, the
Medical Treatment and Care Building of the
Olive View Hospital complex was designed to
meet the earthquake provisions of building
codes in place at that time. The hospital
incurred heavy damage (at left) during
the 1971 earthquake and was subsequently
rebuilt to stricter design and construction
standards.
Olive View Hospital After the 1971 Magnitude 6.7 San Fernando
Earthquake
Photo Credit: E.V. Leyendecker, U.S. Geological Survey
FEMA 577 / June 2007
Risk Management Series
Design Guide for

Improving Hospital Safety
in Earthquakes, Floods,
and High Winds
Providing Protection to People and Buildings
Any opinions, findings, conclusions, or recommendations
expressed in this publication do not necessarily reflect the views of
FEMA. Additionally, neither FEMA nor any of its employees makes
any warranty, expressed or implied, or assumes any legal liability
or responsibility for the accuracy, completeness, or usefulness of
any information, product, or process included in this publication.
Users of information from this publication assume all liability
arising from such use.
FOREWORD AND ACKNOWLEDGMENTS
BACKGROUND
T
he United States is currently in the middle of the biggest hospital
construction boom in more than 50 years. According to data from
the U.S. Census Bureau, spending for construction of new hospi-
tals and other medical facilities increased 65 percent between 2000 and
2006. New scientific and technological innovations, as well as advance-
ments in medical practice and the organization of health care, demand
a physical environment different from the hospitals of the past. This de-
mand is being met by the increasing use of evidence-based design, which
relies on a combination of scientifically proven research and the evalua-
tion of completed projects to make design and construction decisions that
improve the safety and functionality of hospital buildings.
Architects and engineers now look at credible research related not just
to structural and mechanical engineering, but also to clinical outcomes,
behavioral science, the environment, and technology. New building de-
signs are now seen as important components that can improve medical
outcomes, patient safety, employee satisfaction, and even financial perfor-
mance. The effective use of evidence-based design requires continuous
and timely updates of the information that affects hospital design. As part
of this effort, the Federal Emergency Management Agency (FEMA) has
developed this Design Guide to provide the designers of new hospitals
and retrofits to existing ones with the latest information and research re-
sults on the best practices to reduce the risks from natural hazards.
This publication is the latest addition to FEMA’s Risk Management Series,

which provides guidelines for mitigating the risks associated with mul-
tiple hazards. The series emphasizes mitigation best practices for specific
FOREWORD AND ACKNOWLEDGMENTS

building uses and occupancies, such as schools, critical facilities, commer-
cial buildings, and multi-family dwellings.
OBJECTIVE AND SCOPE
The objective of the “Design Guide for Improving Hospital Safety in

Earthquakes, Floods, and High Winds” is to inform and assist design profes-
sionals, hospital administrators, and facility managers in implementing
sound mitigation measures that will decrease the vulnerability of hospi-
tals to disruptions caused by natural hazard events. The intent of the
Design Guide is to provide its audience with state-of-the-art knowledge on
the variety of vulnerabilities faced by hospitals exposed to earthquakes,
flooding, and high-winds risks, as well as the best ways to mitigate the risk
of damage and disruption of hospital operations caused by these events.
The information presented in this publication provides an exhaustive re-

view of mitigation measures and design solutions that can improve the
safety of hospitals in natural hazard events. However, this publication is
not intended to be a comprehensive mitigation design manual that the
reader can use to develop actual plans and specifications. It is intended
as an introduction to the fundamental principles of natural hazard risk
reduction, with an emphasis on mitigation planning and the design of
hospital buildings. The information presented here is intended to help
design professionals, hospital administrators, and facility managers un-
derstand the broad aspects of risk reduction methods and strategies, and
integrate them into hospital designs.
ORGANIZATION AND CONTENT
The Design Guide is organized around three specific natural hazards:

earthquakes, floods, and high winds. It comprises four main chapters.
Chapter 1 presents an overview of the principal considerations deter-

mining hospital design, from standard industry requirements to new
developments that are transforming both hospital operations and organi-
zation of the physical environment. It highlights the known vulnerabilities
of hospitals and the repercussions of damage caused by natural hazard
events that frequently interfere with the operation of these facilities. The
chapter concludes with a look at the multi-hazard approach to hospital
design, and provides basic guidelines on the interaction between the re-
sponses of building components to various natural hazard risks.
Chapter 2 examines potential earthquake damage to hospitals, and how

these facilities can most efficiently improve their performance. The
ii FOREWORD AND ACKNOWLEDGMENTS

chapter opens with an introductory discussion on the nature and prob-
ability of earthquakes, and procedures for determining seismic risk to
specific locations. Typical seismic damages, and the possible resulting ef-
fects on building functions or risk to occupants, are described and related
to the standard damage states currently used in performance-based earth-
quake engineering design. The chapter ends with a review of the best
practices in seismic design and seismic retrofit of hospital facilities.
Chapter 3 discusses the nature of flood forces and their effects on build-
ings. It outlines the procedures for risk assessment and describes the
current mitigation measures for reducing flood damage. It emphasizes
the benefits of avoiding construction of new hospitals in high-risk areas,
describes regulatory design requirements that help reduce the exposure
of hospitals that must be located in flood hazard areas, and encourages
the application of appropriate mitigation measures to existing hospitals at
risk of flooding.
Chapter 4 discusses the effects of wind forces on hospitals’ structural and

nonstructural building components. By reviewing numerous examples of
wind-induced damage to these facilities, this chapter highlights the best
mitigation practices for new hospital design and construction, and for the
rehabilitation of existing facilities. It concentrates on the building compo-
nents that are the most critical for maintaining uninterrupted operation
of hospitals, and provides detailed guidelines for improving their design
and construction.
At the end are Appendix A, which contains a list of acronyms, and Ap-
pendix B, which contains a glossary of terms that appear in the Design
Guide.
ACKNOWLEDGMENTS
Principal Authors:
Christopher Arnold, Building Systems Development, Inc.
William B. Holmes, Rutherford and Chekene
Rebecca C. Quinn, RCQuinn Consulting, Inc.
Thomas L. Smith, TLSmith Consulting
Bogdan Srdanovic, URS Corporation
Wilbur Tussler, Consultant
FOREWORD AND ACKNOWLEDGMENTS iii

Contributors:
Milagros Nanita Kennett, FEMA, Project Officer, Risk Management Series

Publications
Eric Letvin, URS Corporation, Project Manager
Susan Patton, URS Corporation
Rob Fernandez, URS Corporation
Ivy Porpotage, URS Corporation
Wanda Rizer, design4impact
Project Advisory Panel:
Amar Chaker (AEI), American Society of Civil Engineers (ASCE)
Ken Dickerman, AIA Academy of Architecture and Health
Skip Gregory, Florida Agency for Health Care Administration
Mike Kuechenmeister, American Society of Healthcare Engineering
Jim Rossberg (SEI), American Society of Civil Engineers (ASCE)
John Sullivan, Portland Cement Association
This manual will be revised periodically, and FEMA welcomes com-

ments and suggestions for improvements in future editions. Please send
your comments and suggestions via e-mail to:
[email protected]
iv FOREWORD AND ACKNOWLEDGMENTS

TABLE OF CONTENTS
FOREWORD AND ACknowledgments....................................................................... i

Background................................................................................................................................. i
Objective and Scope................................................................................................................ii
Organization and Contents....................................................................................................ii
Acknowledgements................................................................................................................iii
1 HOSPITAL DESIGN CONSIDERATIONS. ........................................................... 1-1
1.1 Introduction......................................................................................................................... 1-1
1.2 Health Care Industry............................................................................................................. 1-3

1.2.1 Ambulatory Care..................................................................................................... 1-3
1.2.2 Patient Volume........................................................................................................ 1-4
1.2.3 Aging Facilities........................................................................................................ 1-5
1.2.4 Healing Environments........................................................................................... 1-5
1.2.5 Technological Advances......................................................................................... 1-6
1.3 Hazard Mitigation................................................................................................................. 1-8

1.3.1 Assessing Risk.......................................................................................................... 1-9
1.3.2 Evacuation Considerations................................................................................... 1-10
1.3.3 Potential Vulnerabilities....................................................................................... 1-11
TABLE OF CONTENTS
1.3.3.1 Structural Vulnerability..................................................................... 1-12
1.3.3.2 Nonstructural Vulnerability.............................................................. 1-12
1.3.3.3 Spatial and Other Organizational Vulnerabilities........................... 1-15
1.4 Hospital Design and Construction.......................................................................................... 1-17

1.4.1 Building Codes...................................................................................................... 1-18
1.5 Multi-Hazard Design Considerations...................................................................................... 1-20

1.5.1 The Need for a Multi-Hazard Approach . .......................................................... 1-21
1.5.2 Multi-Hazard Design Matrix................................................................................ 1-22
1.6 References......................................................................................................................... 1-32
2 MAKING HOSPITALS SAFE FROM EARTHQUAKES.................................. 2-1
2.1 Introduction......................................................................................................................... 2-1

2.1.1 The Nature and Probability of Earthquakes......................................................... 2-1
2.1.2 Earthquake Effects.................................................................................................. 2-2
2.1.3 Measuring Earthquake Effects............................................................................... 2-3
2.1.3.1 Measuring Seismic Ground Motion................................................... 2-5
2.1.3.2 Measuring Potential for Liquefaction................................................ 2-7
2.1.3.3 Measuring Potential for Landslide..................................................... 2-7
2.1.3.4 Measuring Potential for Tsunami and Seiche................................... 2-8
2.1.4 Earthquakes: A National Problem........................................................................ 2-8
2.2 Seismic Building Design . ..................................................................................................... 2-11

2.2.1 The Equivalent Lateral Force (ELF) Analysis Methodology............................. 2-12
2.2.1.1 Acceleration....................................................................................... 2-13
2.2.1.2 Amplification and Soil Type............................................................. 2-14
2.2.1.3 Building Period.................................................................................. 2-15
2.2.2 Critical Building Characteristics ......................................................................... 2-16
2.2.2.1 Period and Resonance...................................................................... 2-16
2.2.2.2 Damping............................................................................................. 2-16
2.2.2.3 Nonlinear Behavior........................................................................... 2-17
vi TABLE OF CONTENTS
2.2.2.4 Ductility.............................................................................................. 2-17
2.2.2.5 Strength and Stiffness....................................................................... 2-18
2.2.2.6 Drift.................................................................................................... 2-19
2.2.2.7 Configuration: Size and Shape........................................................ 2-20
2.2.2.8 Stress Concentrations........................................................................ 2-20
2.2.2.9 Torsional Forces................................................................................. 2-21
2.2.3 Specifications for Performance-Based Seismic Design...................................... 2-24
2.2.3.1 Performance Levels........................................................................... 2-24
2.2.3.2 New Developments in Performance-Based Design......................... 2-27
2.3 Earthquake Damage to Hospitals........................................................................................... 2-29

2.3.1 Types of Structural Damage................................................................................. 2-31
2.3.1.1 The Case of the Olive View Medical Center.................................... 2-32
2.3.2 Nonstructural Damage......................................................................................... 2-35
2.3.2.1 The Case of New Olive View Medical Center.................................. 2-39
2.3.2.2 The Case of Kona Community Hospital, Hawaii ........................... 2-42
2.3.3 Consequences of Building Damage ................................................................... 2-48
2.3.4 Seismic Vulnerability of Hospitals ...................................................................... 2-49
2.3.4.1 Seismic Vulnerability of Hospitals Based on .
Historical Performance in California.............................................. 2-50
2.3.4.2 Vulnerability Assessment of Hospital Buildings.............................. 2-52
2.3.4.3 Comparability of Hospital Buildings................................................ 2-53
2.4 Risk Reduction Measures..................................................................................................... 2-57

2.4.1 Site Selection Basics.............................................................................................. 2-57
2.4.2 Seismic Design Basics........................................................................................... 2-58
2.4.3 Structural Systems................................................................................................. 2-59
2.4.3.1 Basic Types of Lateral Force Resisting Systems............................... 2-59
2.4.3.2 Innovative Structural Systems........................................................... 2-62
2.4.3.3 Structural Systems Selection............................................................. 2-63
2.4.4 Nonstructural Components and Systems............................................................ 2-64
2.4.4.1 Code Regulated Nonstructural Systems........................................... 2-65
2.4.4.2 Interstitial Space for Utility Installations......................................... 2-67
TABLE OF CONTENTS vii

2.4.5 Mitigation Measures for New Buildings.............................................................. 2-68
2.4.5.1 The Case of Loma Linda Veterans Hospital.................................... 2-68
2.4.6 Mitigation Measures for Existing Buildings........................................................ 2-72
2.4.6.1 Procedures and Design Strategies for Rehabilitation .
of Structural Systems......................................................................... 2-72
2.4.6.2 The Case of Naval Hospital Bremerton........................................... 2-73
2.4.6.3 Procedures and Design Strategies for Rehabilitation .
of Nonstructural Systems.................................................................. 2-77
2.4.6.4 Summary of Risk Reduction Measures for Existing .
Buildings............................................................................................ 2-77
2.5 Checklist for Seismic Vulnerability of Hospitals........................................................................ 2-80
2.6 References and Sources of Additional Information.................................................................... 2-84
3 MAKING HOSPITALS SAFE FROM FLO0DING............................................ 3-1
3.1 General Design Considerations................................................................................................ 3-1

3.1.1 The Nature of Flooding......................................................................................... 3-1
3.1.2 Probability of Occurrence or Frequency.............................................................. 3-4
3.1.3 Flood Characteristics and Loads............................................................................ 3-7
3.1.3.1 Hydrostatic Loads................................................................................ 3-9
3.1.3.2 Hydrodynamic Loads........................................................................ 3-10
3.1.3.3 Debris Impact Loads......................................................................... 3-12
3.1.3.4 Erosion and Local Scour . ................................................................ 3-13
3.1.4 Design Parameters................................................................................................ 3-14
3.1.4.1 Flood Depth ...................................................................................... 3-14
3.1.4.2 Design Flood Elevation .................................................................... 3-17
3.1.4.3 Flood Velocity—Riverine.................................................................. 3-17
3.1.4.4 Flood Velocity—Coastal.................................................................... 3-18
3.1.5 Flood Hazard Maps and Zones............................................................................ 3-19
3.1.5.1 NFIP Flood Maps............................................................................... 3-20
3.1.5.2 NFIP Flood Zones.............................................................................. 3-21
3.1.5.3 Coastal A Zones ................................................................................ 3-24
viii TABLE OF CONTENTS

3.1.6 Floodplain Management Requirements and Building Codes . ........................ 3-26
3.1.6.1 Overview of the NFIP........................................................................ 3-26
3.1.6.2 Summary of the NFIP Minimum Requirements ............................ 3-28
3.1.6.3 Executive Order 11988 and Critical Facilities ................................ 3-29
3.1.6.4 Scope of Model Building Codes and Standards . ........................... 3-30
3.2 Hospitals Exposed to Flooding ............................................................................................. 3-33

3.2.1 Identifying Flood Hazards at Existing Hospitals................................................ 3-33
3.2.2 Vulnerability: What Flooding Can Do to Existing Hospitals............................ 3-33
3.2.2.1 Site Damage....................................................................................... 3-34
3.2.2.2 Structural Damage............................................................................. 3-36
3.2.2.3 Nonstructural Damage...................................................................... 3-38
3.2.2.4 Medical Equipment........................................................................... 3-41
3.2.2.5 Utility System Damage....................................................................... 3-41
3.2.2.6 Contents Damage.............................................................................. 3-44
3.3 Requirements and Best Practices in Flood Hazard Areas............................................................ 3-47

3.3.1 Evaluating Risk and Avoiding Flood Hazards..................................................... 3-47
3.3.2 Benefits and Costs: Determining Acceptable Risk............................................ 3-48
3.3.3 Site Modifications................................................................................................. 3-50
3.3.4 Elevation Considerations..................................................................................... 3-53
3.3.4.1 The Case of Boulder Community Foothills Hospital, .
Boulder, Colorado ............................................................................ 3-58
3.3.5 Dry Floodproofing Considerations .................................................................... 3-63
3.3.6 Flood-Resistant Materials .................................................................................... 3-66
3.3.7 Access Roads ........................................................................................................ 3-68
3.3.8 Utility Installations . ............................................................................................. 3-69
3.3.9 Potable Water and Wastewater Systems............................................................... 3-71
3.3.10 Storage Tank Installations ................................................................................... 3-71
3.3.11 Accessory Structures ............................................................................................ 3-72
3.4 Risk Reduction for Existing Hospitals..................................................................................... 3-73

3.4.1 Introduction.......................................................................................................... 3-73
TABLE OF CONTENTS ix
3.4.2 Site Modifications ................................................................................................ 3-73
3.4.3 Additions .............................................................................................................. 3-75
3.4.4 Repairs, Renovations, and Upgrades.................................................................. 3-77
3.4.5 Retrofit Dry Floodproofing . ............................................................................... 3-78
3.4.5.1 The Case of Pungo District Hospital, Belhaven, North .
Carolina.............................................................................................. 3-79
3.4.6 Utility Installations . ............................................................................................. 3-84
3.4.7 Potable Water and Wastewater Systems............................................................... 3-86
3.4.8 Other Damage Reduction Measures .................................................................. 3-87
3.4.9 Emergency Measures............................................................................................ 3-88
3.5 Checklist for Building Vulnerability of Flood-Prone Hospitals...................................................... 3-90
3.6 References and Sources of Additional Information.................................................................... 3-98
4 MAKING HOSPITALS SAFE FROM HIGH WIND................................ 4-1
4.1 General Design Considerations................................................................................................ 4-1

4.1.1 Nature of High Winds............................................................................................ 4-3
4.1.2 Probability of Occurrence...................................................................................... 4-3
4.1.3 Wind/Building Interactions.................................................................................. 4-5
4.1.4 Building Codes........................................................................................................ 4-9
4.1.4.1 Scope of Building Codes..................................................................... 4-9
4.1.4.2 Effectiveness and Limitations of Building Codes............................ 4-10
4.2 Hospitals Exposed to High Winds.......................................................................................... 4-13

4.2.1 Vulnerability: What High Winds Can Do to Hospitals...................................... 4-13
4.2.1.1 Types of Building Damage................................................................ 4-13
4.2.1.2 Ramifications of Damage.................................................................. 4-16
4.2.1.3 The Case of West Florida Hospital, Pensacola, Florida.................. 4-17
4.2.2 Evaluating Hospitals for Risk From High Winds................................................ 4-24
4.2.2.1 New Buildings.................................................................................... 4-24
4.2.2.2 Existing Buildings.............................................................................. 4-25
TABLE OF CONTENTS
4.3 Requirements and Best Practices In High-Wind Regions ........................................................... 4-26
4.3.1 General Hospital Design Considerations............................................................ 4-26
4.3.1.1 Site ..................................................................................................... 4-28
4.3.1.2 Building Design ................................................................................ 4-29
4.3.1.3 Construction Contract Administration............................................ 4-34
4.3.1.4 Post-Occupancy Inspections, Periodic .
Maintenance, Repair, and Replacement.......................................... 4-35
4.3.1.5 Site and General Design Considerations in .
Hurricane-Prone Regions................................................................. 4-36
4.3.2 Structural Systems ............................................................................................... 4-37
4.3.2.1 Structural Systems in Hurricane-Prone Regions............................. 4-41
4.3.3 Building Envelope ............................................................................................... 4-42
4.3.3.1 Exterior Doors................................................................................... 4-42
4.3.3.2 Exterior Doors in Hurricane-Prone Regions................................... 4-46
4.3.3.3 Windows and Skylights...................................................................... 4-47
4.3.3.4 Windows and Skylights in Hurricane-Prone Regions .................... 4-49
4.3.3.5 Non-Load-Bearing Walls, Wall Coverings, and Soffits.................... 4-52
4.3.3.6 Non-Load-Bearing Walls, Wall Coverings, and Soffits .
in Hurricane-Prone Regions . .......................................................... 4-64
4.3.3.7 Roof Systems...................................................................................... 4-65
4.3.3.8 Roof Systems in Hurricane-Prone Regions...................................... 4-74
4.3.3.9 The Case of DeSoto Memorial Hospital, Arcadia, Florida............. 4-81
4.3.4 Nonstructural Systems And Equipment.............................................................. 4-85
4.3.4.1 Exterior-Mounted Mechanical Equipment..................................... 4-86
4.3.4.2 Nonstructural Systems and Mechanical Equipment.
in Hurricane-Prone Regions............................................................ 4-94
4.3.4.3 Exterior-Mounted Electrical and Communications .
Equipment......................................................................................... 4-94
4.3.4.4 Lightning Protection Systems (LPS) in Hurricane-.
Prone Regions.................................................................................... 4-97
4.3.4.5 The Case of Martin Memorial Medical Center, Stuart, .
Florida.............................................................................................. 4-102
TABLE OF CONTENTS xi
4.3.5 Municipal Utilities in Hurricane-prone Regions.............................................. 4-104
4.3.5.1 Electrical Power .............................................................................. 4-104
4.3.5.2 Water Service .................................................................................. 4-105
4.3.5.3 Sewer Service .................................................................................. 4-106
4.3.6 Post-design Considerations In Hurricane-Prone Regions............................... 4-106
4.3.6.1 Construction Contract Administration . ....................................... 4-106
4.3.6.2 Periodic Inspections, Maintenance, and Repair .......................... 4-106
4.4 Remedial Work on Existing Facilities.................................................................................... 4-107

4.4.1 Structural Systems............................................................................................... 4-109
4.4.2 Building Envelope ............................................................................................. 4-111
4.4.2.1 Sectional and Rolling Doors........................................................... 4-111
4.4.2.2 Windows and Skylights.................................................................... 4-112
4.4.2.3 Roof Coverings................................................................................ 4-115
4.4.3 Exterior-Mounted Equipment........................................................................... 4-117
4.4.3.1 Antenna (Communications Mast)................................................. 4-117
4.4.3.2 Lightning Protection Systems......................................................... 4-118
4.4.4 The Case of Baptist Hospital, Pensacola, Florida............................................. 4-118
4.5 Best Practices in Tornado-Prone Regions............................................................................... 4-122

4.5.1 The case of Kiowa County Memorial Hospital, .
Greensburg, Kansas............................................................................................ 4-126
4.5.2 The case of Sumter Regional Hospital, Americus, Georgia............................ 4-135
4.6 Checklist for Building Vulnerability of Hospitals Exposed to High Winds ................................... 4-141
4.7 References and Sources of Additional Information.................................................................. 4-147
APPENDICES
Appendix A Acronyms................................................................................................................A-1
Appendix B Glossary of Terms....................................................................................................B-1
xii TABLE OF CONTENTS

HOSPITAL DESIGN CONSIDERATIONS 1
1.1 INTRODUCTION
M
ost Americans are accustomed to receiving sophisti-
cated and prompt medical attention after an injury or a
medical problem occurs, anytime and anywhere in the
country, without traveling great distances. Such expectations are even
greater during mass emergencies that require immediate care for a
large number of casualties. In circumstances in which hospital opera-
tions are disrupted or completely disabled, the adverse effects of such
disasters can be quickly compounded, frequently with catastrophic re-
sults. A recent report from the Congressional Research Service (CRS),
Hurricane Katrina: the Public Health and Medical Response, examined the
performance of the public health system during this devastating event.
According to the CRS report, Hurricane Katrina pushed some of the
most critical health care delivery systems to their limits, for the first time
in recent memory (Lister, 2005). Therefore, the importance of unin-
terrupted hospital operations and ready access to, and availability of,
immediate medical care cannot be exaggerated.
The intent of this publication is to provide guidelines for planning, de-

sign, and construction of new hospitals and rehabilitation of existing
ones, for the purpose of improving their performance during, and in the
immediate aftermath of, seismic, flooding, and high-wind events. It is im-
portant to acknowledge that there are no universal design guidelines
to protect buildings from all such events. Different natural phenomena
present different challenges, and each hazard requires a different ap-
proach and a different set of recommendations. When communities face
more than one of these hazards, the design team must select the mitiga-
tion measures most appropriate for achieving the desired performance
level, regardless of the immediate cause for the potential losses.
HOSPITAL DESIGN CONSIDERATIONS 1-1

For instance, flooding is a more site-specific hazard than others. The pre-
ferred approach for new facilities is to select a site that is not subject to
flooding. When that is not feasible, site modifications or other site-specific
building design features that mitigate anticipated flood hazard will reduce
the potential for damage. When it comes to seismic and high-wind events,
however, in addition to carefully selecting the site, it is necessary to design
the buildings to be resistant to the variety of forces associated with these
phenomena. The protection against seismic forces requires that both
structural and non-structural building components have sufficient resis-
tance. For high winds, protection efforts focus mainly on the exposed
building components and systems.
This chapter addresses the general issues that influence the operations
and hospital building designs. Typically, the design of hospital facilities is
driven by their function and the type of services they provide to the com-
munity. These services are constantly evolving in response to trends in the
health care industry and changing expectations of health care customers.
Some of these health care trends have been the logical result of advances
in medical science and technology, while the others, driven by social and
economic conditions, represent new approaches to management of med-
ical care. Additionally, hospital design has been greatly influenced by the
recognition that physical environment has a measurable influence on
human well-being. A growing body of evidence has been accumulated
that shows how appropriate hospital designs can create the healing envi-
ronments that improve patient treatment outcomes and patient care in
general. Increasingly, hospital designers are expected to use this new evi-
dence-based design approach when designing new hospitals.
In order to design effective medical facilities for the future, designers

must be familiar with the latest industry developments, building require-
ments stemming from these trends, and the latest research findings on
the impact of building designs on hospital operations, staff and patient
morale, and patient care. It is the purpose of this Design Guide to add
to these general considerations the issues of buildings’ resistance to nat-
ural hazards and recommended hazard mitigation measures for risk
reduction.
1-2 HOSPITAL DESIGN CONSIDERATIONS

1.2 HEALTH CARE INDUSTRY
1.2.1 Ambulatory Care
I
n the last 30 years or so, the health care industry has increasingly
been moving toward greater emphasis on ambulatory care. The in-
creasing availability of procedures that can be successfully completed
without an overnight stay in the hospital has led to a proliferation of free-
standing ambulatory care centers. Many of these centers are performing
sophisticated surgeries and complicated diagnostic procedures. Fre-
quently, these centers are not affiliated, or are only loosely affiliated with,
other hospitals in the community.
The emphasis on the ambulatory care had a profound effect on the

healthcare industry, leading to the reduction in the number of hospital
beds and, in many cases, closing of hospitals because of the reduced de-
mand for overnight stays. At the same time, hospitals had to increase their
own role in ambulatory care to remain competitive. As the freestanding
ambulatory facilities took an ever-increasing market share, many hospi-
tals had to downsize, and in some cases, scale back even their surgical
capacity. In many respects, this development has diminished the capacity
of medical facilities to care for the casualties in the event of a disaster, be-
cause most of the freestanding ambulatory care centers are not suitable
for post-disaster emergency care. There are several reasons for this:
m They do not have dedicated emergency departments or adequate

facilities and equipment to deal with trauma patients.
m They are not available or staffed on a 24-hour, 7 days-a-week basis.
m They are not adequately equipped with emergency communications

systems.
m The staff is not experienced or well trained to care for the types of
patients and injuries expected in post-disaster emergencies.

m These facilities are not considered essential and are sometimes built
to a lower building code standard than hospitals, which makes them
more vulnerable to disruption resulting from building damage.
On the other hand, hospital-based ambulatory care (outpatient) depart-

ments can easily be converted for post-disaster care during an emergency,
assuming the hospital itself remains operational. Hospital-based ambula-
tory surgeries are often contiguous to surgery for inpatients. Clinic space
can be used for triage or emergency treatment rooms, and the ambula-
tory diagnostic equipment is suitable for use in an emergency. The key to
having hospital-based ambulatory capacity available in the aftermath of
major disasters is thoughtful planning, so that the emergency department
can remain the command center, coordinating other areas of the hospital
where post-disaster patients might be transferred and treated.
1.2.2 Patient Volume
Hospital emergency rooms have become the primary source of medical

care for millions of people. Unlike other medical facilities, hospitals are
required to treat anyone who walks in, or is brought in, irrespective of
their insurance status or ability to pay. This trend puts an enormous pres-
sure on emergency departments, not only because it increases the patient
load, but also because it expands their functions beyond the treatment of
emergency and trauma cases.
As a result, many hospitals have enlarged and better equipped their emer-
gency departments to accommodate the ever-increasing patient load,
which had a positive influence on their capacity to deal with disaster-re-
lated emergencies. Additionally, hospital emergency departments are well
trained in triage that involves prioritization of cases according to the level
of medical urgency. Patients who are most in need of immediate treat-
ment are treated first, while the others who can wait without harm are
treated later. Emergency department staff members also go through ex-
tensive disaster drills, and in most cases are well trained to respond to
mass emergencies.
Despite current hospital construction boom, the trend towards reduced

inpatient capacity in the past decades has adversely affected hospitals’
readiness for emergencies. In 1990, the national average was 372 hospital
beds per 100,000 people, whereas in 2004 there were only 275 beds. The
number of hospitals in the country dropped from 5,384 in 1990 to 4,919
in 2004. This has reduced the number of hospital beds in many commu-
Data from Trendwatch Chartbook 2006, by the American Hospital Association and the Lewin Group.

nities to the point where some rural communities were left without any
acute inpatient capacity.
As a result of hospital closures and inpatient capacity reduction, occu-

pancy rates in the remaining hospitals have increased. The increase
means that most hospitals are operating at near-maximum inpatient ca-
pacity on a regular basis, making it difficult to accommodate a potential
influx of casualties in a disaster emergency. Some reports, especially those
that analyzed the response to Hurricane Katrina, singled out the limited
surge capacity for health care emergencies as one of the most pressing
problems of the Nation’s health care system (see Lister, 2005).
1.2.3 Aging Facilities
Renovation and replacement of health facilities have been at record

highs in recent years. Still, a majority of hospital buildings throughout the
country are of considerable age. A great many of them were built in the
1950s and 1960s, particularly in rural areas, with Federal funding assis-
tance provided by the Hill-Burton Act passed by Congress following World
War II. In the 1960s and 1970s, this grant program was also used for re-
placement and renovation of urban hospitals. As a consequence, a large
number of hospitals were built in a short period of time. Many of these
hospitals are now nearing the end of their useful life. Even with periodic
renovations, there are limits to the value of continued investment in older
facilities to be used for acute care.
Hospitals are constantly renovating, whether they are just adding elec-
trical outlets or communications cables, or engaging in more complex
projects that involve moving functions and building additions to the ex-
isting structures. This kind of change is a result of many factors: changing
personnel, new technologies, and competitive pressure. Some changes,
however, may affect the use of spaces or facilities originally planned and
built for emergency operations. For instance, renovation may inadver-
tently upset bracing for piping and communications conduits, making
them more vulnerable to hazards like earthquakes or high winds. Sim-
ilarly, functional reorganization of a hospital that makes some critical
functions and services more accessible by placing them on the ground
floor increases the risks from flooding to these facilities.
1.2.4 Healing Environments
Since the advent of the hospital “birthing unit” in the late 1970s, the
health industry has shown an increasing interest in the ability of the
physical environment to contribute to healing. The growing evidence in-

dicates that a pleasant and comfortable environment reduces stress and
provides a sense of well-being, both of which are important preconditions
for successful recovery. Additionally, patient satisfaction with hospital
services today extends beyond medical care and encompasses a whole hos-
pital experience. To be able to compete successfully with the increasing
number of outpatient and other alternative healthcare providers, hospi-
tals have started to pay greater attention to providing a “hospitable” and
“healing environment,” in addition to medical expertise, new technology,
and advanced procedures.
This trend manifests itself in building designs that introduce the spirit of
nature into the hospital environment: more natural light, views of nature
and direct access to the outdoors from many more areas of the hospital,
and increased use of courtyards and gardens. Hospital gardens have been
found to provide not only the restorative and calming nature views, but
also help reduce stress by providing opportunities for escape from clin-
ical settings, and by fostering greater social interaction among patients
and staff. The social aspect is particularly important for patients who
might feel isolated in a sterile hospital environment without the support
of their families and friends. Considering the significance of social sup-
port for patients’ successful recovery, hospitals are planning for greater
involvement of the family in the care of their patients by requiring single-
bed rooms for all newly built acute care hospitals. Additionally, hospitals
are providing more public spaces that facilitate social interaction, such as
lounges, atria, and interior streets with shops and restaurants that were
not part of the traditional hospital environment.
The advent of new hospital architecture, especially the new physical

arrangements designed to assist in healing have, in many respects, in-
creased the exposure of hospital buildings to natural hazards. The
emphasis on natural light, the use of single-patient rooms, and a greater
variety of public spaces usually produces complex building designs with
greater exterior perimeter and a greater number of doors and windows
that frequently increase building’s vulnerability to wind and windborne
debris damage.
1.2.5 Technological Advances
New and emerging technologies ranging from new electronic devices,

such as nanoscale sensors, to new wireless communication networks are
rapidly changing patient treatment practices as well as the organization of
hospitals. These innovative medical technologies help empower the phy-
sicians, nurses, and patients with tools that enable faster diagnosis and
better treatment of diseases. Most diagnostic practices and procedural
functions in clinics and surgeries are dependent on modern instruments,

tools, and laboratory equipment. Today’s hospitals are in the process of
replacing all analog-based instruments with digital ones. New hospital or-
ganization is now based on an IT architecture that maximizes the flow
of diagnostic and monitoring data from these instruments through new
communications networks and makes them available to hospital staff in
making treatment decisions.
Digitized X-rays and other images are being transmitted electronically

to all parts of the hospital and to doctors’ offices. Clinical laboratory
test results, prescriptions, and most forms of medical data are now in-
stantly available to medical practitioners. There is a national movement to
adopt a universal electronic medical record, which would make patient’s
medical history and other information almost instantly available to the
treating physician.
These technological innovations substantially changed not only the med-

ical practice, but also turned this new electronic and IT infrastructure
into an essential and indispensable backbone of all hospital operations.
Therein lays the grave vulnerability of hospitals in cases where this sensi-
tive infrastructure can be disrupted, as was seen in many hospitals
affected by Hurricane Katrina. When a disaster, such as Hurricane Ka-
trina, disables or impairs the functioning of electronic equipment and
data transmission systems, or even the hospital voice communications sys-
tems, the ability of the medical staff to care for their patients is
significantly reduced.
Emergency power systems, therefore, become

the critical component for maintaining hospi- A U.S. Department of Energy (DOE) 2002
tal’s functions. The dependence on electrical report ranked healthcare facilities second
power generators is increasing as the hospitals only to food-service facilities in the intensity
rely more and more on energy-intensive equip- of energy use, defined as the amount of
ment and procedures. Even if the hospital is energy consumed per square foot of space.
designed to continue to care for patients after
a disaster, its ability to function is limited by
the emergency power supply capacity, the extent of coverage by emer-
gency power systems, and the ability to remain operational for extended
periods of time.

1.3 HAZARD MITIGATION
M
itigation is defined as any sustained action taken to reduce
or eliminate long-term risk to life and property from hazard
events. The goal is to save lives and reduce property damage
in ways that are cost-effective and environmentally sound. Hazard
mitigation measures should be integrated into the process of planning
and design because they reduce casualties and damage resulting from
building failures during hazard events. The effects of a disaster on
a hospital, however, are never restricted to the physical damage or
the distress among the staff and patients as a result of such damage.
Consequences frequently include partial or total loss of the ability to
provide services and meet the demand for health care when it is most
needed. Incorporating mitigation measures in the design of hospitals is
therefore especially important because they minimize the disruption of
hospital operations and protect the uninterrupted provision of critical
health services.
Advances in building science and technology, and changes in design

philosophy and quality assurance techniques for the construction and
maintenance of medical infrastructure, now make it possible to limit the
damage during seismic, flooding, and high-wind events. The advent of
performance-based design allows the use of different levels of protection
for different types of infrastructure and operations that frequently ex-
ceed the minimum requirements of currently applicable codes. However,
it is not always possible to achieve the protection levels one might desire,
owing to a variety of factors. Natural or technical barriers may exist, or
the funding may be insufficient. Even though financial resources may be
limited, and other circumstances may impose technical barriers to the ful-
fillment of performance objectives, a detailed assessment is still required
in order to ensure the optimal utilization of available resources.
The starting point for such an assessment should be a general review of

the existing hospital network in the area—its operational characteristics,
geographical distribution, the degree to which it is able to meet health

care needs and expectations, the epidemiological and demographic pro-
file of the population served, and the natural hazards that threaten the
provision of medical services. The effective functional capacity of all ex-
isting hospitals should be taken into account, considering as fully as
possible all factual information on the natural hazards they face and their
current level of vulnerability. Once the actual characteristics of this net-
work and the potential hazards have been identified, and the need to
build a new hospital in a specific location has been established, it is still
necessary to define the role that the new facility will play, both in normal
times and during emergencies of various kinds and intensities. Based on
all this information, the level of overall functional performance should be
set for the new facility. The process of determination of the performance
level must address the questions of the importance of continued and
uninterrupted operation of the facility, as well as the feasibility and cost-ef-
fectiveness of such a performance objective.
All this will be influenced by the characteristics of the site, the specifics of
the infrastructure to be built, and the basic services it can realistically be
expected to provide based on different disaster scenarios. In considering
disaster mitigation, the goal should be to provide the community with ac-
cess to health care in a reasonable period of time, within reasonable travel
distances, and to have essential services available to treat patients who
sustained injuries as a result of the disaster. At the same time, a hospital
needs to continue to care for their pre-disaster patients and ensure that
no harm comes to them.
Much of the procedure for a new building described above can apply to
hazard mitigation in an existing building as well, with obvious limitations.
1.3.1 Assessing Risk
Beyond the building codes in existence at the time a hospital is designed

or slated for renovation, the leadership of the facility and the design
consultants must address key questions to establish the adequacy of the
building’s performance in the event of a disaster. Hospitals are under
enormous financial pressure. Any funds invested in making a hospital fa-
cility safer for patients and staff, more resistant to damage, or capable of
continued operations in a post-disaster situation must consider the fol-
lowing questions:
m What types and magnitudes of hazard events are anticipated at the site?
m What are the vulnerabilities of the site or existing building to natural

hazards?

m What are the anticipated frequencies of hazard events?
m What level of loss/damage/injury/death, if any, is acceptable?
m What might be the financial impact of extended downtime on the

institution?
m What is the impact to the community if the hospital cannot maintain

operations in the aftermath of a disaster?
It is not possible to protect against every conceivable event, or to be

100 percent safe and free of damage in a major disaster. The level of
acceptable risk must be decided on an individual facility basis by those re-
sponsible for the institution and its mission.
1.3.2 Evacuation Considerations
In anticipation of high winds or flooding, timely evacuation of some

or all of the hospital patients to facilities out of the disaster area may
sometimes be a prudent choice for patient welfare. The risks of trans-
ferring acutely ill patients must be taken into consideration, as pointed
out by the General Accounting Office (GAO) report to Congress dated
February 16, 2006, titled, Disaster Preparedness: Preliminary Observa-
tions on the Evacuation of Hospitals and Nursing Homes Due to Hurricanes.
It stated: “Administrators consider several issues when deciding to
evacuate or to shelter in place, including the availability of adequate
resources to shelter in place, the risks to patients in deciding when to
evacuate, the availability of transportation to move patients and of re-
ceiving facilities to accept patients, and the destruction of the facility’s
or community’s infrastructure.”
Many patients have limited mobility and some are on critical life sup-
port, oxygen or other medical gasses, ventilators, or IV pumps. Moving
these patients to evacuate the hospital is difficult and requires highly
trained staff.
In each geographical area, acute care facility managers must evaluate

the likely time that they would need to hold patients, how many addi-
tional patients might arrive seeking care, and what services would be
needed and for what period of time. In the case of Hurricane Katrina,
some hospitals evacuated their Neonatal Intensive Care Unit, bariatric
patients, and dialysis patients before the storm landfall, which proved
both prudent and beneficial. For hospitals planning to retain their di-
alysis patients, it is essential to assure a constant supply of electricity to
power the equipment needed for these patients.

Most hospitals plan to “shelter in place” and weather the storms, rather
than evacuate. In order to do this, they must take care of their existing
patients, many of whom are critically ill, and in addition, be prepared
to accommodate the casualties as well as the increased number of out-
patients. In order to accomplish this, there are a wide variety of services
that must remain functional. Often municipal utility services will be cut
off during a disaster, so alternative power, water, and waste disposal ser-
vices need to be provided onsite whenever possible. Communication
systems are often cut off, so redundancy is a key factor in maintaining
links to the outside world as well as internal communications within
the hospital. FEMA publications 361 and 543 both address the specific
needs of structures to be used as disaster shelters. Sheltering in place
can be challenging, but in most cases it is the preferred option for most
acutely ill patients.
If there is a plan to evacuate patients, or a probability that patients will

need to be evacuated, regional planning with other hospitals in the area
and coordination of resources is essential. Agreements and appropriate
provisions need to be put in place so that space and staff are available to
accommodate evacuated patients. The State of Florida has put in place
an evacuation tracking system for all evacuated patients. This might be
a useful model for other States to follow.
1.3.3 Potential Vulnerabilities
Hospitals provide services that are essential for protecting and safe-
guarding the health and well-being of a community. The continued
provision of these services is even more critical during and in the im-
mediate aftermath of disasters. Considering the complexity of hospital
operations, even the smallest breakdown in one of its building or equip-
ment systems can cause serious disruption of hospital functions. This
makes the hospitals extremely vulnerable to a variety of natural hazards.
Hospitals usually have high levels of occupancy, with patients, staff, and
many visitors present 24 hours a day. Many patients require constant at-
tention, and in many cases continuous specialized care and the use of
sophisticated medical instruments or other equipment. Hospital op-
erations also depend on a steady supply of medical and other types of
material, as well as public services or lifelines. In addition, hospital vulner-
ability is aggravated by the presence of hazardous substances that may be
spilled or released in a hazard event.
Given the importance of hospital services for response and recovery fol-
lowing emergencies, and the need for uninterrupted operation of these
facilities, hospital administrators and designers must consider all aspects

of their vulnerability. Three main aspects of hospital vulnerability must be
taken into account:
m Structural
m Nonstructural
m Organizational
1.3.3.1 Structural Vulnerability
Structural vulnerability is related to potential damage to structural com-

ponents of a building. They include foundations, bearing walls, columns
and beams, staircases, floors and roof decks, or other types of structural
components that help support the building. The level of vulnerability of
these components depends on the following factors:
m The level to which the design of the structural system has addressed
the hazard forces
m The quality of building materials, construction, and maintenance
m The architectural and structural form or configuration of a building
The aspects of adequate design and construction in most hazard-prone

areas are regulated by building codes and other regulations. The main
purpose of these regulations is to protect the safety of occupants. They
are usually prescriptive in nature, i.e. they establish minimum require-
ments that are occasionally updated based on newly acquired knowledge.
The building regulations alone, however, cannot guarantee uninter-
rupted operation of a hospital, because a great many other factors affect
hospital functions.
1.3.3.2 Nonstructural Vulnerability
The experience of hospital evacuations and other types of disruption

during recent hazard events (many of which are described in greater
detail in later chapters) has heightened the awareness that hospital func-
tions could be seriously impaired or interrupted, even when the facilities
did not sustain significant structural damage. The effects of damage to
nonstructural building components and equipment, as well as the effects
of breakdowns in public services (lifelines), transportation, re-supply, or
other organizational aspects of hospital operations, can be as disruptive,
and as dangerous for the safety of patients, as any structural damage.

Architectural Components
Nonstructural vulnerabilities that can affect hospital functions and the

safety of occupants include the potential failures of architectural compo-
nents, both on the exterior and the interior of buildings.
Damage to roof coverings, facades, or windows can make way for water
penetration that can damage sensitive equipment and shut down many
hospital functions. When roofing material is disturbed by wind, the
roof may start to leak and the moisture can knock out vital equipment,
disrupt patient care, and penetrate walls and other concealed spaces,
allowing mold to build up over time. Window breakage resulting from
high winds, earthquakes, and even flooding frequently requires patient
evacuation from affected areas. Patients in critical care and acute care
units are particularly vulnerable because the move separates them from
medical gas outlets, monitors, lighting, and other essential support
services.
Non-load bearing and partition walls and ceilings, for instance, are
rarely designed and constructed to the same standards of hazard re-
sistance as the structural elements. Collapse of these components has
caused a number of evacuations and closures of hospitals following a
hazard event.
Installations
Hospitals are extremely complex building systems that depend on an

extensive network of mechanical, electrical, and piping installations.
The air and ventilation system is one of the most important ones be-
cause it is responsible for maintaining an appropriate environment in
different parts of the hospital. Isolation rooms usually have negative
pressure so that harmful airborne organisms do not migrate outside the
patient’s room and infect others. Likewise, wards housing patients with
immune system deficiencies require a positive pressure differential,
so that harmful organisms do not enter the patient room and need-
lessly infect them. The malfunction in any one part of this ventilation
system could create a risk of infection to patients and staff. This system
is extremely vulnerable to disruption as a result of indirect building
damage. Winds habitually overturn improperly attached roof-mounted
ventilation and air-conditioning equipment, while the ductwork is very
susceptible to collapse in earthquakes. Additionally, strong winds may
change the airflow from ventilation exhaust outlets, potentially causing
harmful discharges from patient care areas and the clinical labora-
tory to be sucked back into the fresh air intakes. Airborne debris from
windstorms could quickly clog the air filtration systems, making them
inoperable or impaired.

Hospitals depend on several essential piping systems. Medical gasses are
among the most important, along with water, steam, and fire sprinkler sys-
tems. Physicians and nurses depend on oxygen and other gasses required
for patient care. Unless properly secured and braced, these installations
can be easily dislodged or broken, causing dangerous leakage and poten-
tial additional damage.
In floods and earthquakes particularly, sewers are apt to overflow, back

up, or break down. Waste disposal is essential for any hospital, because
when the toilets back up, or sterilizers, dishwashers, and other automated
cleaning equipment cannot be discharged, patient care is immediately
affected. Retention ponds or holding tanks coupled with backflow and di-
version valves can be employed to solve this problem; however, in many
hospitals, this issue has not been adequately addressed.
Elevator service is vulnerable not only to power outage, but also to

direct damage to elevator installations. Wind and windborne debris can
damage elevator penthouses, opening a path for water penetration that
can disable elevator motors and controls, as has happened in numerous
hurricanes in recent years. In the event of an earthquake, elevator shafts
and other equipment can be damaged or dislodged, effectively shutting
down the building. Flooding of elevator pits was a common problem
during Hurricane Katrina, and responsible for the loss of elevator service.
The emergency power supply system is probably the most critical element
in this group. Together with fuel supply and storage facilities, this system
enables all the other hospital installations and equipment that have not
sustained direct physical damage to function normally in any disaster.
However, uninterrupted operation of a hospital during a power outage is
possible only if adequate electrical wiring is installed in all the areas that
require uninterrupted power supply. Since extra wiring and additional cir-
cuits for emergency power increase the initial construction costs of the
building, the decision on the emergency power coverage requires a thor-
ough evaluation of the relative vulnerability of various functions to power
outage. As patients become more critically ill and the nature of diagnosis
and treatment becomes more dependent on computers, monitors, and
other electrical equipment, the need for emergency power will continue
to grow.
The experience of Hurricane Katrina has demonstrated the need for

emergency power coverage even for services that typically have not been
regarded as critical, such as climate control and air-conditioning systems.
Extreme heat caused a number of hospitals to evacuate their patients and
staff when the conditions became unbearable.

Equipment and Furnishings
There are many types of internal hazards that might occur as the re-
sult of a disaster. In the past, bottles in clinical laboratories have fallen
and started fires. Earthquakes have catapulted filing cabinet drawers and
ventilators across rooms at high speed, with the potential of causing con-
siderable injury to personnel. Any wheeled equipment is vulnerable to
displacement and has the potential to cause injury.
Electronic communication systems
Hospitals use and depend on many types of communication systems. For

communications with emergency vehicles or first response agencies, hos-
pitals depend on radio equipment that is frequently mounted on roofs
and exposed to high winds and windborne debris impact. Satellite dishes,
communication masts, antennae, and other equipment can be blown off
the roof or be severely damaged, leaving the hospital without this vital ser-
vice at a critical time.
1.3.3.3 Spatial and Other Organizational

Vulnerabilities
Most hospitals have disaster mitigation or emergency operation plans, but

not all of them provide organizational alternatives in the event of disrup-
tion of the normal movement of staff, patients, equipment, and supplies
that characterizes everyday hospital operations. The critical nature and
interdependence of these processes represent a separate category of vul-
nerabilities that need careful attention. Spatial distribution of hospital
functions and their inter-relationship determines the extent hospital op-
erations are affected when normal movement and communication of
people, materials, and waste are disrupted. The disruption by natural
hazard events of administrative services such as contracting, procurement,
maintenance, as well as allocation of resources, can impair hospital func-
tions almost as much as any physical damage.
Just-in-time delivery: Many hospitals have currently eliminated, or greatly

reduced, onsite storage for linen, supplies, food, and other materials es-
sential to normal operations. Any prolonged isolation or blockage of
streets serving the hospital could lead to a need to ration supplies and
triage patients for treatment, due to the limited supplies stored on site.
During Hurricane Katrina, many hospitals were isolated by floodwaters
for 5 or more days and, in many cases, could not replenish critical sup-
plies, which in some instances contributed to the decision to evacuate
the facility.

Evacuation: Evacuation of patients is a measure of last resort, but occasion-
ally necessary, especially in extreme situations. Many different conditions
or vulnerabilities mentioned above can cause the evacuation of a hospital,
but the process of evacuation itself can also be vulnerable to disruption
that can seriously aggravate the health and safety of patients. Frequently, a
flood, earthquake, or a windstorm can cause blockage of access roads, cut
ting off a hospital from normal evacuation routes, as happened during
Hurricane Katrina. Surface escape routes were under water and unus-
able, and even air evacuation was impaired because many ground level
helicopter landing pads were under water. Elevated helipads located on
roof tops or elevated parking structures proved invaluable features in this
type of an emergency. The spatial relationship to the hospital building
was another aspect that greatly influenced the evacuation and reduced
the risk of aggravating patients’ condition. Helipads physically connected
to the hospital were most useful, because patients could be transported di-
rectly and very rapidly from the upper levels of the hospital to the helipad
without interference from other hospital functions.

1.4 HOSPITAL DESIGN AND
CONSTRUCTION
P
ermanent high occupancy and the need for uninterrupted
operation are the most important characteristics of hospital
facilities. They determine most of the building design
requirements and pose the greatest challenge in the design of
mitigation measures. Contemporary hospitals must accommodate both
critically ill patients and a high volume of ambulatory patients. Length
of stay for inpatients may be as short as one day, but usually averages
around 5 to 6 days in most hospitals. Acute care patients often have
visitors on a daily basis, while emergency departments are routinely
crowded with patients and their families, particularly at peak times
during the day.
It is not uncommon that some building designs that are otherwise suit-
able for the complex requirements of hospital operations can impair
these operations in emergency conditions. This is particularly true of
many older hospitals that were not designed to maintain their per-
formance level in all conditions. Older emergency departments are
generally not large enough and are often overcrowded. Many of the
older hospitals would not have been designed to adjust their operations
and their physical space to the conditions of mass post-disaster care.
Similarly, larger hospitals typically have greater flexibility to cope with the
emergencies and large numbers of casualties than smaller hospitals. This,
however, can be a liability, especially in dense urban areas where hospitals
buildings are frequently 10 or more stories high. Large, tall hospital build-
ings, with greater than usual floor-to-floor height, are almost completely
dependent on elevators for vertical communication, which exposes them
to serious disruption in case of electrical or mechanical failures common
during hazard events. Such difficulties are further compounded if an
evacuation is necessary. When the elevators are rendered inoperable, the
patients must be carried up or down long stairwells, which can be an over-
whelming task for the staff of any large hospital.

Since the development of effective ventilation systems, most hospitals
were designed as “thick” buildings, where many areas do not have natural
light and depend on mechanical ventilation to be usable. Generally, the
larger the hospital, the more functions and areas depend on mechanical
ventilation and artificial light. This is another important aspect of hospital
vulnerability in situations where normal power supply is disrupted. Hos-
pital closures and evacuations caused by nonfunctioning air-conditioning
systems in the wake of Hurricane Katrina stand as stark examples of the
need to protect these systems much more effectively.
Hospitals usually do not occupy just one building. In most cases a hospital
is located on campus that comprises a number of different buildings, each
housing a separate function. In addition to an acute care hospital, which
might be composed of several wings of varying ages, there might also be
a separate power plant, medical office building, ambulatory surgery and
procedures building, behavioral health building, fitness center, dialysis
center, or cancer center. Since all of these buildings have a different type
and level of occupancy, from the perspective of patient safety and that of
uninterrupted hospital operations, they do not need the same level of di-
saster-resistant construction.
1.4.1 Building Codes
Most States have adopted one of the model building codes, frequently
with modifications and local additions. Building codes address minimum
requirements for building resistance to major hazards based on historical
experience. Recent disaster experience, however, indicates that current
code requirements are not always adequate, especially not for essential fa-
cilities such as hospitals. To make things worse, many existing hospitals
were built to older codes that frequently did not have any provisions for
protection against natural hazards.
Most essential facilities require special attention, in addition to compli-

ance with building code requirements, in order to be able to sustain their
operations after a major disaster. Some States, like Florida or California,
for example, have amended their codes to address the need for adequate
protection of hospitals and other critical facilities from prevailing local
hazards. California has adopted legislation for seismic design based on the
principle that hospitals should be able to function at least at a basic level
after an earthquake of moderate to large magnitude. This new standard
has resulted in the closure of many hospitals that could not comply with
the new requirements in a cost-effective manner. The implementation of
this standard was significant because it established the new criterion for
post-disaster functionality that should serve as a model for hazard-prone
regions. This and similar standards have expanded the narrow, prescrip-

tive nature of most building codes, by defining the performance goals
that hospitals must achieve. This Design Guide fully supports the trend to-
ward performance-based codes for design and construction of hospitals.
In addition to local building codes, various organizations and agencies,

like the U.S. Department of Veterans Affairs (VA), have developed their
internal building design and construction regulations to address the three
major hazards: flood, wind and earthquake. The VA standard “Natural Di-
sasters Non-Structural Resistive Design (formerly CD-54)” together with this
publication, is a valuable resource for information on new hospital con-
struction and renovation of existing hospitals.

1.5 MULTI-HAZARD DESIGN
CONSIDERATIONS
A
comprehensive hazard risk reduction design strategy that con-
siders all the risks to which a facility may be subject is an evolving
concept that is still in its infancy. Multi-hazard design is an ap-
proach that aims to integrate risk reduction with the building design
process, rather than pursuing a traditional tendency towards fragmented
risk reduction efforts.
Chapters 2, 3, and 4 outline the characteristics of the three natural haz-

ards that are the subject of this publication, in terms of their geographical
locations, intensity, and frequency. In addition, methods used to mitigate
the risks and issues relating to building codes and regulations are also dis-
cussed. However, each hazard is discussed separately, without reference
to the others. Many building locations are vulnerable to more than one
hazard, requiring the application of appropriate design solutions that
would mitigate each relevant hazard.
This section looks at the interaction between various building design fea-
tures and mitigation measures used to protect buildings against specific
hazards, by comparing their effects for each individual hazard. The simi-
larities and differences in the ways that hazards affect buildings, and how
to guard against them, demand an integrated approach to building de-
sign that would be resistant to natural hazards. This, in turn, must be
pursued as part of a larger, integrated approach to the whole building de-
sign process.
Of the many hazards that can endanger a hospital and impair the services
it provides to a community, fire is the most prevalent. Every hospital is at
risk from fire, which makes this hazard much more pervasive than any of
the natural hazards noted above. However, fire protection measures have
been present in building codes for a long time, in the form of approved
materials, fire-resistant assemblies, exiting requirements, the minimum
number and capacity of emergency exit routes, and many other specifica-
tions. For that reason, fire hazards are not addressed in this publication as

a stand-alone hazard. However, the mitigation measures used to protect
the buildings against high winds, floods, and earthquakes may interact fa-
vorably or unfavorably with the need for fire protection. For this reason,
fire is included as a hazard in the table of system interactions at the end of
this chapter.
1.5.1 The Need for a Multi-hazard

Approach
The need to embrace a multi-hazard approach when designing or ret-

rofitting a hospital is essential for their protection, especially when they
are located in areas that are exposed to a variety of natural and man-
made hazards. A multi-hazard approach can help identify potentially
conflicting effects of certain mitigation measures and help to avoid ag-
gravating the vulnerability of many hospital building components and
systems. A comprehensive evaluation and application of hazard mitiga-
tion in building design serves to improve the overall effectiveness of
mitigation measures that protect the continuity of hospital functions
and operations. The importance of this practice has become increas-
ingly evident following the catastrophic disasters that have occurred in
the recent past.
The aim should be to anticipate and coordi-

nate how the building and its systems interact, A multi-hazard risk reduction approach
how mitigation of the risk from one hazard can requires a multidisciplinary design team.
influence the building’s vulnerability to others, This ensures that the project design benefits
and how undesirable conditions and conflicts from an appropriate professional expertise
may be avoided or resolved. Through the appli- and a thorough discussion of project issues
cation of a multi-hazard and multi-disciplinary from start to finish.
approach, cost savings, efficiency, and better
performance can be achieved in programming and planning new build-
ings and retrofitting existing ones.
The design team should be able to take an all-hazard viewpoint, and

understand how the structure and systems interact under extreme con-
ditions imposed by natural hazards. Thus, an important aspect of
multi-hazard design should be to investigate the extent to which the
methods used for mitigation of one hazard may reinforce or conflict with
design elements necessary for protection against other possible hazards.
When the design methods reinforce one another, the costs of multi-
hazard design may be reduced and the performance improved, but where
they conflict, costs may be increased in order to satisfy the requirements
for resistance to all relevant hazards.

1.5.2 Multi-Hazard Design Matrix
The Multi-hazard Design System Interaction Matrix highlights the inter-

action between a particular hazard and a building design component or
system. Table 1-1 presents this system interaction matrix in a graphic form
by adding small illustrations for each site or building characteristic listed.
For each entry the matrix provides a description; a sample illustration;
positive, negative, or neutral characterization of the interaction; and an
explanation of the nature of interaction.
The explanations are general statements intended more to provoke

thought and further analysis towards design integration, rather than to
provide definite restrictions or recommendations. It is possible to over-
come conflicts by sound, coordinated design between the consultants,
starting at the inception of design. General cautions, such as the rela-
tionship between building weight and seismic forces, for example, are
intended only as reminders of basic physical facts.
In order to facilitate comparison between hazards, the following conven-

tion has been used in Table 1-1.
Indicates a desirable condition or beneficial interaction between the

4
designated component/system and a given hazard
Indicates an undesirable condition or the increased vulnerability of a

6
designated component/system to a given hazard
Indicates little or no significant interaction between the designated

0
component/system and a given hazard

Table 1-1: Multi-hazard Design Matrix
Stress Concentration
THE HAZARDS
System ID Site and
Examples of Site
Building
Seismic
Flood
Wind
and Building Characteristics
Fire
Characteristics Explanation of Interaction
1 SITE
Site-specific and
building specific Beneficial for all
1A 4 4 4 4
all-hazard hazards.
analysis.
Two or more
Beneficial for all
1B means of access 4 4 4 4
hazards.
to the site
Highly beneficial for

flood, needs very
Site modification careful site engineering
to elevate for earthquakes. Not
1C 6 4 0 0
building on significant for fire.
engineered fill. Probably not significant
for wind but depends
on topography.
2 ARCHITECTURAL
2A CONFIGURATION
May cause stress

concentrations and
2A-1
torsional forces in
Re-entrant corner 6 0 6 0
earthquakes, and
plan forms contribute to localized
high-wind pressures.
2A-2 May cause stress

Enclosed concentrations and
6 0 0 0
courtyard plan torsional forces in
forms earthquakes.

Table 1-1: Multi-hazard Design Matrix (continued)
THE HAZARDS
System ID
Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
2 ARCHITECTURAL (continued)
2A CONFIGURATION (continued)
May create indirect

load paths, stress
2A-3 concentrations, and
torsional forces in
Very irregular
earthquakes. May
three- 6 0 6 6
contribute to localized
dimensional high wind pressures,
building forms and aggravate
evacuation during fire
emergencies.
Vulnerable to vertical
2A-4
earthquake and wind
Large roof 6 0 6 0
forces, needs careful
overhangs engineering.
2B CEILINGS
If properly attached
2B-1 to structural
Hung ceilings components using
4 0 0 4
diagonal braces,
reduce damage from
earthquakes.
2C PARTITIONS
2C-1
Unreinforced High vulnerability
CMU or hollow to seismic and wind
forces, but desirable
clay tile, used
6 6 6 4 against fire if not
as partitions or in seismic zone. If
infill between exposed, vulnerable to
structural flood forces.
framing

THE HAZARDS
System ID Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
2 ARCHITECTURAL (continued)
2C PARTITIONS (continued)
2C-2
Non-rigid (ductile)
connections for Beneficial for
attachment of earthquakes but gaps
between components
interior non-load-
4 0 0 6 may threaten fire
bearing walls to
resistance. Not
structures including significant for flood
extra-high and and wind.
-heavy gypsum
board walls
Gypsum partitions
properly braced to
structure beneficial
2C-3 in seismic zones.
Gypsum wall 4 6 0 4 Susceptible to flood
board partitions damage, but good for
fire if proper resistance
is specified. Not
significant for wind.
2D OTHER ELEMENTS
Undesirable in seismic
zones unless properly
attached. On light
structures, may cause
poor seismic response.
2D-1
6 0 6 4 Good fire protection
Tile roofs against external
fire (wildfires) but
undesirable in hurricane-
and tornado-prone
regions.
Properly engineered
parapet beneficial
in seismic zones,
but unbraced URM
very dangerous in
2D-2
4 0 0 4 earthquake and wind.
Parapets High parapets ( >3 ft.)
beneficial for wind.
May assist in reducing
fire spread to adjacent
buildings.

THE HAZARDS
System ID
Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
3 STRUCTURAL SYSTEM
Beneficial for
earthquake, but
3-1 base isolation in
Base isolation basement should be
and/or energy 4 6 0 0 dry floodproofed to
dissipating reduce vulnerability
dampers to flood damage. Not
significant for wind
and fire.
Light weight beneficial

3-2 in seismic zones
Wood frame provided adequate
structure, used connections and shear
4 6 0 0 walls are used.
for small hospitals
and ancillary and Lightness and lack of
service buildings moisture resistance a
disadvantage in floods.
3-3 Although weight

Heavy structure increases seismic
with concrete floors, forces it is not a
design problem.
reinforced concrete
4 4 4 4 Requires special non-
moment frame, or ductile detailing for
frame with reinforced large building frames.
concrete or masonry Generally beneficial
shear walls. for all other hazards.
3-4
Reinforced Very beneficial
concrete or for wind, good
performance for
reinforced CMU
4 4 4 4 earthquake, flood,
structural walls and fire when
with concrete correctly designed
floors and roof and constructed.
deck
Lighter than concrete,
needs properly detailed
moment frame, steel
braces, or shear walls
3-5
in seismic and high-
Steel structural 4 4 4 6
wind zones. Good
frame in flood with proper
detailing, especially
for elevated structure.
Vulnerable to fire.

THE HAZARDS
System ID
Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
3 STRUCTURAL SYSTEM (continued)
Very poor
3-6 performance in
Unreinforced earthquakes and high
6 6 6 0
masonry load- winds. Undesirable for
bearing walls all hazards because of
possibility of collapse.
3-7
Very beneficial for
Steel or concrete
flood. Requires careful
frame structure 0 4 0 0
design for earthquake,
with open first wind, and fire.
floor
Undesirable for
seismic and wind
hazards because poor
3-8
structural integrity
Indirect vertical 6 0 6 6
increases likelihood
load path of collapse. Fire
may further weaken
structure.
Discontinuity at third floor
Improves seismic
response, but creates
possible path for
3-9 toxic gases during
Large seismic fire. (Cause of deaths
4 0 6 6
separation joints in Las Vegas MGM
in structure Grand fire.) Needs
careful protection
against wind-driven
rain.
3-10 Provides better

Ductile detailing nonlinear response
of steel and RC 4 0 4 0 and a structure that
structure and is more resistant to
connections collapse.

THE HAZARDS
System ID
Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
3 STRUCTURAL SYSTEM (continued)
Properly designed, will

preserve evacuation
3-11 routes in event of fire.
Reinforced May create torsional
concrete or response and stress
6 0 4 4
reinforced CMU concentrations in
around exit ways earthquakes unless
and exit stairs isolated. If fully encloses
staircases beneficial as
wind shelter.
4 BUILDING ENVELOPE
4A EXTERIOR WALL CLADDING
In earthquakes, winds,
and floods material
may detach and cause
4A-1
costly damage and
Brick veneer on 6 6 6 0
injury. Careful detailing
exterior walls and quality control
necessary for good
performance.
Light weight reduces

structural response
in earthquakes,
but needs very
4A-2 careful engineering
Lightweight and application to
4 0 6 0
insulated cladding prevent leakage
and EIFS and detachment in
winds. Vulnerable
to windborne debris
impact. Not significant
in floods or fire.
Requires special
detailing with ductile
connections to structure
4A-3 in high seismic zones.
Precast concrete 6 0 4 0
panels Good for winds if well
attached and joints are
protected against wind-
driven rain.

THE HAZARDS
System ID Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
4 BUILDING ENVELOPE (continued)

4B GLAZING
Light weight reduces

seismic forces, but needs
special design and
installation to prevent
4B-1
failure in earthquakes.
Metal/glass 4 0 6 6
Fire can spread upward
curtain wall behind curtain wall if
not properly fireproofed.
Vulnerable to windborne
debris.
Can cause problems

during fire rescue
operations, limiting
4B-2
smoke ventilation and
Impact-resistant 0 0 4 6
access. Good against
glazing wind-borne debris
but not significant for
earthquake or flood.
5 UTILITIES
Essential for
5-1 earthquake and wind
Anchorage/ (especially exterior
4 4 4 0
bracing of system mounted), beneficial
components for flood, not
significant for fire.
Chiller Support
Very beneficial for

5-2 flood, if in upper
floors may be subject
Location of system
6 4 0 0 to greater forces
components above in earthquake, not
flood level significant for wind
or fire.

THE HAZARDS
System ID
Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
6 MECHANICAL
6-1 Essential for

Anchorage/ earthquake and wind
4 4 4 0
bracing of system (exterior-mounted),
components beneficial for flood.
6-2
Vibration-isolated
equipment Very beneficial for
designed for earthquake, not
seismic and wind significant for flood or
4 0 0 0
forces: snubbers fire. If not designed to
prevent resist uplift inadequate
equipment for wind.
from falling off
isolators Isolators with “snubbers”
and provisions for wind
uplift
Very beneficial for

6-3 wind and earthquake
(with seismic designed
Anchorage
4 0 4 0 isolators where
of rooftop necessary), not
equipment significant for floods
and fire.
7 PLUMBING
7-1 Essential for

earthquake and wind
Anchorage/
4 0 4 4 (for exterior-mounted
bracing of system systems), beneficial
components for fire.

THE HAZARDS
System ID Site and
Examples of Site
Building
Seismic
Flood
Wind
Fire
8 ELECTRICAL AND COMMUNICATIONS SYSTEM
8-1 Essential for

earthquake and wind
Anchorage/
4 0 4 4 (for exterior-mounted
bracing of system systems), beneficial
components for fire.
Unbraced electrical
cabinets
8-2
Emergency
power supply
Essential for seismic,
adequate for 4 4 4 4
flood, wind, and fire.
essential services
and equipment
securely braced
Braced emergency
batteries

1.6 References
S. A. Lister, “Hurricane Katrina: The Public Health and Medical Response,”

Congressional Research Service, 21 September 2005.
US Department of Energy (DOE). 2002. Buildings for the 21st Century.

Office of Building Technology, State and Community Programs
Newsletter. Washington, DC. DOE/GO-102002-1518. Winter 2002.
World Health Organization. 2006. Health Facility Seismic Vulnerability

Evaluation. World Health Organization Regional Office of Europe,
Copenhagen, Denmark.

MAKING HOSPITALS SAFE FROM EARTHQUAKES 2
2.1 INTRODUCTION
T
his chapter examines potential earthquake damage to hospitals
and how these facilities can most efficiently improve their ex-
pected performance. An explanation of the nature and probability
of earthquakes is provided, together with procedures for determining
the approximate earthquake threat to specific locations. Typical seismic
damages and the possible resulting effects on building function or risk to
occupants are described and related to standard damage states currently
used in performance-based earthquake engineering design.
The enhanced performance normally expected from hospitals is dis-

cussed, specifically as it relates to protection of inpatients and provision
of care for the injured and other outpatients. Since many older buildings
may not have been designed for seismic forces, particularly for enhanced
performance, estimation of the actual expected performance is critical
for adequate emergency planning.
The case studies in this chapter illustrate the performance of hospital

buildings in earthquakes, and look at the enhancements made in the ex-
isting seismic protection of the structural and nonstructural systems to
improve performance. The chapter ends with a review of best practices in
seismic design and seismic retrofit of hospital facilities.
2.1.1 The Nature and Probability of

Earthquakes
Although earthquakes cannot be prevented, modern science and

engineering provide tools that can be used to reduce their effects.
MAKING HOSPITALS SAFE FROM EARTHQUAKES 2-1

Firstly, science can now identify where earthquakes are likely to occur,
at what magnitude, and determine the relative likelihood of a range of
ground shaking levels. This information is readily available to architects,
engineers, code writers, planners, and to the general public. Secondly,
seismic researchers and structural engineers with experience in seismic
design have sufficient understanding of the effects of earthquake shaking
on buildings to create designs that will be safe for various intensities of
shaking. Modern building codes incorporate all of this information and
require buildings to have seismic designs appropriate for each region.
However, earthquakes are complex phenomena, and the exact nature

of ground shaking, and a building’s response to that shaking, are still
shrouded in considerable uncertainty. The primary intent of the seismic
provisions of building codes is to provide buildings that will be safe in the
expected earthquake. Current buildings designed to modern codes are
extremely unlikely to sustain serious structural damage or partial collapse
in a design earthquake. However, subtle changes in shaking from site to
site, the wide range of building types and configurations, and the varia-
tion in skill and thoroughness with which any one building is designed
and constructed can result in a wide range of damage levels in any given
earthquake. Perhaps more importantly, many older hospital buildings
were designed and built without seismic design features, or at best out-
dated ones. These buildings cannot be expected to perform well enough
to serve their intended roles after an earthquake event. Lastly, it is now
well known that the nonstructural systems of essential buildings are ex-
tremely important in maintaining post-earthquake functionality. Until
very recently these systems, in general, have not been designed and in-
stalled with adequate seismic protection.
2.1.2 Earthquake Effects
Fractures and movements within the earth’s crust generate earthquake

ground motion by sending waves through the rocks and soil outward
from the source. Most commonly, these sources are known faults, defined
as cracks or weakened planes in the earth’s crust most likely to “break”
as a result of global tectonic movements. The propagation of the waves
through the crust produces movement of the earth’s surface. Any one lo-
cation on the surface will move in every direction simultaneously, back
and forth, side to side, and up and down, creating the shaking effect that
is both strange and frightening. The shaking effect, or seismic ground mo-
tion, is felt in all directions from the epicenter—the location where the
fracture started—and diminishes with distance from the epicenter. Build-
ings, bridges, transmission towers, and other structures supported by, and
attached to, the ground will also be shaken. If the intensity of shaking is
high, most structures will sustain some damage. The criteria used to de-
2-2 MAKING HOSPITALS SAFE FROM EARTHQUAKES

termine the capacity of the ground motion to inflict damage on the built
environment are somewhat intuitive: large displacements of the ground
(3 feet versus 3 inches), rapid changes in the movement (measured in
units of acceleration), or the duration of shaking.
Although seismic ground motion is most often identified with earth-

quakes, it is not the only phenomenon that causes damage. Earthquakes
involve movements of large portions of the earth’s crust, and the resulting
shaking can produce other geologic hazards:
Surface Fault Rupture affects a small strip at the ground when the move-
ment on a fault deep within the earth breaks through to the surface. The
relative displacement of the ground on each side of the rupture may be
several feet or more, and structures straddling this zone are likely to be se-
verely damaged.
Liquefaction occurs when the behavior of loose granular soils and sand in
the presence of water changes temporarily from that of a solid to that of a
liquid material when subjected to ground shaking. This condition occurs
mainly at sites located near rivers, lakes, and bays.
Landslides occur when the top layers of soil and rock slip on sloping
ground, triggered by earthquake ground motion.
Tsunamis are earthquake-caused wave movements in the ocean that travel

at high speed and may result in large coastal waves of 30 feet or more.
They are sometimes, and incorrectly, called tidal waves.
Seiches are waves similar to tsunamis. They can be triggered by earthquakes

and generated by sloshing in closed lakes or bays; they have the potential
to cause serious damage, although such occurrences are very rare.
2.1.3 Measuring Earthquake Effects
Earthquakes vary in many respects, but the resulting shaking depends

mainly on the magnitude of the earthquake and the distance from the
epicenter. The potential risk to manmade structures is determined on the
basis of frequency of occurrence of earthquakes at a given site, and mea-
surements of a number of physical characteristics of ground shaking. The
following section discusses the measurements used for this purpose, and
their role as damage parameters.
Perhaps the most familiar measure of earthquakes is the Richter Mag-

nitude, devised by Professor Charles Richter of the California Institute
of Technology in 1935. Richter’s scale is based on the maximum ampli-

tude of certain seismic waves recorded on a standard seismograph at
a distance of 100 kilometers (km) from the earthquake epicenter. Be-
cause the instruments are unlikely to be exactly 100 km from the source,
Richter devised a method to allow for the diminishing of wave amplitude
with increased distance. The Richter scale is logarithmic, and each unit
of magnitude indicates a ten-fold increase in wave amplitude. The en-
ergy level is multiplied approximately by 31 for a unit increase in Ritcher
magnitude scale. The scale is open-ended, but a magnitude of about 9.5
represents the largest earthquake scientists now expect within the cur-
rent understanding of movement in the earth’s crust.
Among scientists, Richter Magnitude has been replaced by Moment

Magnitude, a similar measure of energy that is based on the physical char-
acteristics of the fault rupture, which is a more useful measure for large
events. The Moment Magnitude scale has been set to produce values
similar to the Richter scale, and for damaging earthquakes, values are nor-
mally in the 5.5 to 8.0 range, although magnitudes over 9.0 also occur.
The level of damage is often measured by intensity scales, and the most
common scale used in the United States is the Modified Mercalli Inten-
sity (MMI) scale, reported in Roman Numerals from I to XII. MMI is
often incorrectly used to measure the size of an earthquake. In fact, the
MMI is assigned to small areas, like zip codes, based on the local damage
to structures or movements of soil. Many MMIs
can be associated with a single earthquake be-
It is important to understand that magnitude cause the shaking, and therefore the damage,
is not a measure of damage, but a physical diminishes as the distance to the epicenter in-
characteristic of an earthquake. An creases. Although the MMI is useful for the
earthquake with magnitude 6.7 that occurs purpose of comparing damage from one event
in a remote area may cause no damage to to another (particularly events for which little
manmade structures, but one with the same or no instrumental measurements are avail-
magnitude can cause considerable damage able), it is very subjective, and scientists and
if it occurs close to an urban area. engineers prefer instrumental measurements
of the ground shaking to measure intensity.
Scientists and engineers need measures of the damaging characteristics

of earthquakes to compare the inherent risk at different locations, and
to develop design solutions to limit damage to acceptable levels. The uni-
versal characteristic of earthquakes, and the one that can be measured
most precisely, is the ground motion. Extensive networks of instruments
are now employed on the ground and in manmade structures to record
continuously the motions during an earthquake. The ever-growing data-
base of earthquake recordings can be analyzed in various ways to develop
appropriate measures of intensity that best predict potential damage to
buildings and other structures, and the possibility of liquefaction and
landslides. Tsunamis and seiches are normally not caused by the traveling

seismic waves, but by large, single movements of land under water as part
of the fault movement or resulting large landslides.
2.1.3.1 Measuring Seismic Ground Motion
Acceleration is a measure of velocity changes over time, and is commonly

experienced when our heads snap back when a car starts off rapidly. Sim-
ilarly, acceleration causes a building to “snap back” as a result of sudden
large ground movement. This movement within the building or other
structure, which becomes very complex when caused by 20 seconds or
more of ongoing, rapidly changing accelerations, is what causes direct
shaking damage. Consequently, it is common to describe earthquake mo-
tion using the largest acceleration that occurred during the event, or peak
ground acceleration (PGA).
Although PGA is useful as a simple way to measure and compare ground

motions, it is not the most comprehensive one. From studies of ground
motions and structural responses to ground motions, engineers and re-
searchers have developed parameters that consider the characteristics
of the entire motion, rather than the one instant when the PGA occurs.
This characterization of the ground motion is called a response spectrum
and measures the extent of shaking different structures will experi-
ence, based on their natural period of vibration, when subjected to a
given ground motion (see section 2.2.2.1). The maximum response to
a specific ground motion of a structure with a given period is called the
spectral ordinate. The full response spectrum simply represents the suite of
spectral ordinates for a wide range of structures—from periods of about
0.2 seconds (short, very stiff buildings) to periods of about 4.0 seconds
(tall, very flexible buildings).
Response spectra can be calculated for the entire database of recorded

ground motions, and trends analyzed. For example, it has been deter-
mined that the response spectrum for most earthquake shaking has a
similar shape, and that this shape has subtle changes based on the soil on
which it was recorded. Figure 2-1 shows the typical shape of earthquake
ground motion spectra and the variations that will be caused, on average,
by different site soils. Like PGA, higher spectral ordinates typically mean
more intense and potentially damaging motions. By studying the location
of potential earthquake sources and the probability of them generating
an earthquake in any given time period, scientists can develop a response
spectrum for earthquake shaking likely to occur at that site. This has
been done by the U.S. Geological Survey (USGS) for the entire United
States, and is the basis for seismic design requirements in building codes.
This information is presented on maps. For simplicity, only two spectral
ordinates are mapped, for periods of 0.2 second and 1.0 second. Exam-

ples of these maps are shown in Figure 2-2. Rules in the building codes
allow engineers to calculate the appropriate spectral ordinate for all pe-
riods, as shown in Figure 2-1, based on the mapped values. Site classes
in the figure are also defined in the building codes, Class A being hard
rock, and Class E being a very soft site with potential soil failure.
Figure 2-1:
Representative shapes
of building code (or
design) response
spectra for different
soils
Figure 2-2: Example of national seismic hazard maps

2.1.3.2 Measuring Potential for Liquefaction
Soils that are loose, not well graded, and saturated with water are prone to
liquefaction. These conditions often occur near waterways, but not always.
In addition to the soil type, the probability of liquefaction also depends
on the depth from the surface to the layer, and the intensity of ground
motion. Further, the results of liquefaction can vary from a small, uni-
form settlement across a site, to loss of foundation bearing, resulting in
extreme settlement and horizontal movement of tens of feet (called lat-
eral spreading). Lastly, the risk of liquefaction is directly dependent on
the earthquake risk. Due to this complex set of conditions, damage poten-
tial from liquefaction is difficult to map. For all but the smallest projects,
many building jurisdictions in seismic areas require identification of lique-
faction potential in the geotechnical report, particularly in areas of known
potential vulnerability. On sites where liquefaction is more than a remote
possibility, the likely results of liquefaction at the ground surface or at the
building foundations will also be estimated. Small settlements may be tol-
erated without mitigation. Larger potential settlements can be prevented
by site remediation measures, if economically justified. In some cases of
potential massive liquefaction and lateral spreading, using the site for
structures may not be cost effective. Officials in some regions of high seis-
micity have developed maps of local areas that are potentially susceptible
to liquefaction and require site-specific investigation.
2.1.3.3 Measuring Potential for Landslide
The shaking from earthquakes can also cause landslides, depending on

the slope, type, and configuration of soil stratum. Landslides can cause
damage to improvements built within the slide area or near the top of
the slide, ranging from complete destruction to distortion from relatively
small vertical or lateral movements. Sites can also be threatened by land-
slides occurring uphill, sometimes completely offsite and quite a distance
away. Similar to liquefaction, accurate probability of land sliding is dif-
ficult to map on a regional or national scale, and this threat is normally
identified in site-specific geologic hazard studies. Also similar to lique-
faction, the largest portion of the risk may be a triggering event. In some
cases, it is possible and cost effective to stabilize small areas at risk of po-
tential landslides. Stabilizing larger areas at risk of landslides may not
be feasible. Some regions of high seismicity have developed maps of the
areas susceptible to landslides based on average slopes, geologic soil types,
and the past history of sliding. Sites within these susceptible zones require
site-specific investigation.

2.1.3.4 Measuring Potential for Tsunami and Seiche
Researchers have studied tsunamis and seiches for many years, but the
tragic tsunami in the Indian Ocean in December 2004 highlighted the
need for better measurement of the threat in terms of magnitude and lo-
cation. Obviously, only sites near large bodies of water are susceptible,
and normally at elevations 50 feet or less above the water surface, al-
though bays and narrow canyons can amplify the wave height. Although
similar to storm surge, the height and the potential velocity of a tsunami
wave represent a separate risk and must be mapped separately. In addi-
tion to dependence on local conditions, quantification of the risk from
tsunamis and seiches is made more difficult because not every earth-
quake generates such a wave. Studies are required that consider the
individual characteristics of the site and the facility, to establish the risk
and identify possible mitigating measures.
2.1.4 Earthquakes: A National Problem
Most people now know that although most frequent in California and
Alaska, earthquakes are not restricted to just a few areas in the United
States. In fact, two of the greatest earthquakes in U.S. history occurred not
in California, but near New Madrid, MO, in
1811 and 1812. In the International Building
The U.S. Congress recognized earthquakes Code (IBC), the most common model building
as a national problem by passing code in use in the United States and its territo-
legislation authorizing the National ries, buildings on sites with a low enough
Earthquake Hazards Reduction Program seismic risk that specific design for seismic
(NEHRP) in 1977. NEHRP has since forces is not required are classified as Seismic
supported numerous research and hazard Design Category (SDC) A. As shown in Figure
mitigation efforts. 2-3, 37 of 50 States have regions with sufficient
seismic risk to require designs more stringent
than SDC A. The likelihood of a damaging
earthquake occurring west of the Rocky Mountains—and particularly in
California, Alaska, Oregon, Washington, and Utah—is much greater than
it is in the East, Midwest, or South. However, the New Madrid and
Charleston, SC, regions are subject to potentially more severe earth-
quakes, although with a lower probability, than most regions of the
western United States. According to the IBC design maps and the USGS
hazard maps upon which they are based, other locations should also plan
for intermediate ground motions.

Figure 2-3: States with seismic risk
Records show that some seismic zones in the United States experience po-
tentially damaging earthquakes approximately every 50 to 70 years, while
other areas have “recurrence intervals” for the same size earthquake of
about 200 to 400 years. These frequencies of occurrence are simply statis-
tical probabilities, and one or several earthquakes could occur in a much
shorter than average period. With current knowledge, there is no prac-
tical alternative for those responsible for healthcare facilities located in
earthquake-prone regions but to assume that the design earthquake, spec-
ified in the building code for the local area, could occur at any time, and
that appropriate planning for that event should be undertaken.
Moderate and even very large earthquakes are inevitable, although very
infrequent, in some areas of normally low seismicity. Consequently, in
these regions, most buildings in the past were not designed to deal with
an earthquake threat; they are extremely vulnerable. In other places, how-
ever, the earthquake threat is quite familiar. Medical facilities in many
areas of California and Alaska will be shaken by an earthquake, perhaps
two or three times a year, and some level of “earthquake-resistant” design
has been accepted as a way of life since the early 20th century.
Nationally, the areas where earthquakes are likely to occur have been
identified, and scientists have a broad statistical knowledge of the po-

tential magnitude of these earthquakes and the likelihood of their
occurrence. However, it is not yet possible to predict the near-term oc-
currence of a damaging earthquake. Therefore, it makes sense to take
the minimum precautionary measures and conform to local seismic
building code requirements for new buildings. U.S. seismic building
code provisions focus on requiring the minimum measures necessary to
prevent building collapse, because most lives are lost in earthquakes as
a result of building collapse. The code provisions for essential buildings
intended to remain functional after a major earthquake have not yet
been thoroughly tested.
If a healthcare facility or community desires to obtain more detailed information on the seismic
hazard than is shown on the code maps, or if the location does not enforce a seismic code but
there is concern about seismicity, the USGS Web page at www.USGS.gov, Earthquake Hazards
Program, is an excellent resource. The USGS provides more detailed earthquake hazard maps
for general regions such as the Western, Central, and Eastern United States. Local building or
planning departments, fire departments, or other local emergency management agencies should
be consulted for the availability of mapping for liquefaction, landslide, tsunami, and seiche.
For even more localized information, the USGS provides seismicity information for any location
in the United States on the basis of latitude and longitude or zip code. This information
can be obtained by referring to the Seismic Hazard listings on the USGS Web page, and
opening “Hazards by Latitude and Longitude,” or “Hazards by Zip Code.” These listings show
information on the expected maximum shaking that is estimated for the location. The information
and terminology are quite technical, and may need to be interpreted by qualified staff at the
responsible local code office, a structural engineer, or other knowledgeable seismic professional.

2.2 SEISMIC BUILDING DESIGN
S
eismic design is highly developed, complex, and strictly regulated
by codes and standards. Seismic codes present criteria for the de-
sign and construction of new structures subject to earthquake
ground motions in order to minimize the hazard to life and to improve
the capability of essential facilities to function after an earthquake. To
these ends, current building codes provide the minimum requirements
necessary for reasonable and prudent life safety.
More basic information about seismic design of buildings can be found in

FEMA 454, Designing for Earthquakes (FEMA, 2007)
Building design codes for cities, States, or other jurisdictions throughout the United States
are typically based on the adoption, sometimes with more restrictive local modification, of
a model building code. Up until the mid-1990s, there were three primary model building
code organizations: Building Officials and Code Administrators International, Inc. (BOCA),
International Conference of Building Officials (ICBO), and Southern Building Code Congress
International, Inc. (SBCCI). In 1994, these three organizations united to found the International
Code Council (ICC), a nonprofit organization dedicated to developing a single set of
comprehensive and coordinated national model construction codes. The first code published by
ICC was the 2000 International Building Code (IBC; ICC, 2000) and was based on the NERHP
Provisions. The IBC now references ASCE 7, Minimum Design Loads for Buildings and Other
Structures (ASCE, 2005) for its seismic provisions. Some jurisdictions in the country may still be
using the Uniform Building Code (UBC) seismic provisions (its final update was in 1997), while
most have adopted or are preparing to adopt the IBC. In this document, code references are to
the IBC Code and to its seismic standard, ASCE 7.
Seismic code requirements cover:
m A methodology for establishing the design ground motion at any site

based on seismicity and soil type

m Procedures for the seismic analysis of the building structure and key
nonstructural components and systems
m Some detailed design requirements for materials, systems, and

components
m Definitions of irregular building configurations and limitations on

their use
m Building height limitations related to structural type and level of

seismicity
Current codes and seismic design practices have evolved rapidly as the
result of intensive research and development in the United States and
elsewhere during the second half of the twentieth century. The advances
in the development of the code during this period are illustrated by the
fact that the 1961 Earthquake Provisions of the Uniform Building Code
took seven pages, eight equations, and one map of the United States. The
current provisions in the IBC cover about 80 pages, 96 equations, and 22
maps of the United States.
2.2.1 The Equivalent Lateral Force (ELF)

Analysis Methodology
Of the 96 equations in the IBC, the Equivalent Lateral Force (ELF)

equation is the key element in the most-used code methodology for deter-
mining seismic forces. This force is termed the equivalent force because it
represents, in greatly simplified and reduced form, the complex to-and-
fro, multidirectional earthquake forces with a single static force applied at
the base of the building. Once this force is determined, all the structural
components of the building (walls, beams, columns, etc.) can be analyzed
through other code-prescribed procedures to determine what proportion
of this force must be assigned to each of them. This general methodology
is characteristic of all seismic codes throughout the world.
The ELF equation is derived from Newton’s Second Law of Motion, which
defines inertial force as the product of mass and acceleration. The ELF
equation replaces Newton’s acceleration with an acceleration coefficient
that incorporates some of the other factors necessary to represent more
accurately the acceleration of the mass of the building, which is gener-
ally higher than the ground acceleration. To determine this coefficient,
the code provides another equation and additional coefficients that en-
compass most of the characteristics that affect the building’s seismic
performance. The ELF procedure is used for the great majority of build-

ings. Buildings of unusual form, or with other special features or site con-
ditions, may be required to use more complex analytical methods.
Hospitals are classified in the building code as Occupancy Category IV—

“essential for post-earthquake response and recovery”—and therefore
have special design requirements intended to improve performance. De-
signers should use 50 percent greater earthquake forces for design of
Category IV buildings than for normal buildings, which will provide an
additional safety factor and reduce potential structural damage. In addi-
tion, design rules for Category IV buildings allow less movement between
floors during earthquake shaking, reducing nonstructural damage to win-
dows, walls, stairways, and elevators. Lastly, these buildings are required
to incorporate more complete and stronger anchorage and bracing of
nonstructural components and systems than normal buildings.
2.2.1.1 Acceleration
The most common and widespread cause of earthquake damage is

ground shaking caused by the seismic waves that radiate out from the
focus of the earthquake. The waves begin like ripples in a still pond when
a pebble is thrown into it, but rapidly become more complex. There are
four main wave types, of which “body” waves, within the earth, are most
important for seismic design purposes. First to arrive at a given site is the
P or Primary wave: this wave successively pushes and pulls the ground
along the wave front as it moves forward. The effect is felt as a sharp
punch—it feels as if a truck has hit the building. The P wave is followed
by S, the secondary or shear wave, which is a lateral motion, back and forth,
but perpendicular to the wave front.
The nature of the waves and their interactions are such that actual move-
ment of the ground will be random: predominantly horizontal, often with
considerable directional emphasis and sometimes with a considerable ver-
tical component. Because of the random nature of the shaking, structures
must be designed on the assumption that earthquake forces will come from
all directions in very rapid succession, often fractions of a second apart.
The inertial forces inside the building, generated by ground shaking, de-
pend on the building’s mass and acceleration. The seismic code provides
22 maps that provide values for spectral acceleration (the acceleration to be
experienced by structures of different periods). These values, with some
Acceleration is the change of velocity (or speed) in a certain direction over time, and is a function of the
earthquake characteristics: acceleration is measured in “g,” which is the acceleration of a falling body due to
gravity.

additional operations, are inserted into the ELF equation and provide the
acceleration value and eventually the base shear value for the structure.
Figure 2-4 shows an example of a portion of map from the IBC, showing
contour lines of spectral acceleration. The numbers are the acceleration
values to be used in the equation, based on the project location.
Figure 2-4:
Portion of an
earthquake ground
motion map used in
the seismic code
2.2.1.2 Amplification and Soil Type

As seismic vibrations propagate towards the earth’s surface, they may
be amplified depending on the intensity of the shaking, the nature of
the rock and, above all, by the surface soil type and depth. Earthquake
shaking tends to be more severe on soft ground than in stiff soil or rock,
which produces greater building damage in areas of soft soils. This am-
plification is most pronounced for shaking at longer periods and may not
be significant at short periods. Studies after the 1989 Loma Prieta Earth-
quake showed that shaking in the soft ground was 2.5 to 3.5 times that of
shaking in rock.

The ELF equation deals with soil amplification by introducing a soil type
coefficient in the process of determining the acceleration coefficient. The
code defines six soil types, ranging from hard rock to very soft soil, and
provides varying coefficients that relate soil type to building period, be-
cause the amplification is also modified by building period.
2.2.1.3 Building Period
All objects have a natural or fundamental period. This is the rate at which
they will vibrate if they are given a horizontal push. When a building be-
gins to vibrate as a result of ground motion, it will tend to sway back and
forth at its natural period (Figure 2-5).
Figure 2-5:
Natural period
More complex structures will oscillate at several different periods, the lon-
gest one (greatest amount of time to complete one cycle) often being
called the fundamental period. The fundamental periods of structures
vary from about 0.05 second for a piece of equipment anchored to the
ground to about 0.10 second for a one-story building. Taller buildings be-
tween 10 to 20 stories will oscillate in the fundamental mode at periods
of between 1 and 2 seconds. The building height is normally the main de-
terminant of building period (Figure 2-6), although more technically, the
period is based on the mass and stiffness characteristics of the structure.
Acceleration within the building is influenced by its period, and dimin-

ishes as the period increases (the motion changes from abrupt shocks to a
gentler swaying) as explained in Section 2.1.3.1.

Figure 2-6:
Period (in seconds)
and building height
2.2.2 Critical Building Characteristics
2.2.2.1 Period and Resonance
As described in Section 2.1.3.1, the natural period of a building mea-

sures the time it takes to vibrate one full cycle. This basic characteristic of
the structure will determine to a large degree how a building responds to
earthquake ground shaking. Short, stiff buildings will have a short period
and will shake with sharp, jerky movements (high accelerations), which
will tend to cause contents such as equipment or furniture to slide around
and possibly overturn. Taller, more flexible buildings will have longer
periods and “shake” slower and smoother, but with larger “to and fro”
movement than short buildings. The larger movements may create more
relative displacement between floors and cause damage to walls, stairs,
and elevators connected to multiple floors. In rare cases, buildings with
periods over about 1.5 seconds on soft sites may match the vibration pat-
terns of the site and resonate, causing large amplifications of the motions
within the buildings.
2.2.2.2 Damping
A pendulum—or a child’s swing—is a very effective oscillator, and will

continue to swing for many minutes after a push, although the extent of
the swinging, or amplitude, will gradually diminish. Buildings and other
objects do not oscillate as effectively because the vibration is damped, or
reduced. The extent of damping in a building depends on the structural
system, materials of construction; how the structural components are con-
nected; and on the type and quantity of architectural elements such as

partitions, ceilings, and exterior walls. A high level of damping, in which
the vibration of the building will rapidly diminish, is a desirable feature.
2.2.2.3 Nonlinear Behavior
It is generally not cost-effective to design buildings to be completely un-

damaged in strong earthquake motion. Building codes require designers
to base their designs on forces that are not as great as the shaking can
generate, on the assumption that the building’s structure will deform and
absorb part of the energy, thus limiting the forces that can be generated.
These severe deformations represent “nonlinear behavior” and structural
damage, ranging from minor (that can be left alone) to more serious
(that will require repair). The building code has been “tuned” over the
last 5 or 6 decades by adjusting code requirements according to the re-
sults of detailed observations of the behavior of buildings. Nonlinear
deformations are expected in hospitals and other critical buildings, but to
a lesser extent than normal buildings. The intent is to minimize structural
damage to enable the buildings to remain occupied after the shaking.
Some materials and structural systems can accept nonlinear behavior

better than others and are thus considered superior seismic systems.
2.2.2.4 Ductility
Ductility is the characteristic of certain materials—steel in particular—

that fail only after considerable distortion or deformation has occurred.
This is why it is more difficult to break a metal spoon by bending it than
one made of plastic. The metal object will remain whole, though dis-
torted, while the plastic spoon will break suddenly without warning
(Figure 2-7). This property of materials is used to ensure that a building
may adequately resist more than its design ground motion.
Figure 2-7:
Ductility

The deformation of metal, even in the spoon, absorbs energy and defers
absolute failure of the structure. Brittle materials, such as unreinforced
masonry or ceramic tile, fail suddenly with a minimum of distortion.
Ductility is an important characteristic of the structural system. Thus,
buildings with appropriate seismic designs are either designed so that
the materials and connections will distort but not break, in case they are
subjected to forces higher than those required by the code, or they are de-
signed for very large forces. Some structural materials, like masonry and
concrete, are brittle on their own, but when properly combined with steel
reinforcing bars, can exhibit high ductility. This characteristic of the struc-
tural system is also considered in the ELF methodology.
2.2.2.5 Strength and Stiffness
Strength and stiffness are the two of most important seismic characteris-
tics of any structure. Two structural beams may be equally strong (or safe)
in supporting a load, but may vary in their stiffness—the extent to which
they bend or deflect in doing so. Stiffness is a material property but is also
dependent on shape. For vertical forces this is usually the only aspect of
stiffness that is of concern. When floor joists are designed for a house, for
instance, their deflection rather than strength is what often dictates their
size. Typically, an unacceptable amount of deflection will occur well be-
fore the members are stressed to the point at which they break.
In seismic design, there is another very important aspect to stiffness. The

problem of determining the overall lateral force on the building by mul-
tiplying its weight by its acceleration has already been discussed. But how
is this force distributed among the various structural members so that the
engineer can design each one appropriately? Relative stiffness enters into
this issue because the applied forces are “attracted to” and concentrated
at the stiffer elements of the structure—in engineering terms, the forces
are distributed in proportion to the stiffness of the resisting elements. Math-
ematically, the stiffness of a structural member varies approximately as
the cube of its length: thus one column that is half the length of another
will be eight times stiffer (23) and will be subject to eight times the hor-
izontal load of the long column. This concept has serious implications
for structures with lateral members of varying lengths, and in designing
such a structure the engineer tries to equalize the stiffness of the resisting
elements so that no one member or small group of members takes a dis-
proportionate amount of the overall load (Figure 2-8).
Short columns represent a problem that emphasizes the need for good
structural seismic design. Columns in this category may not even be part
of the lateral force resisting system. Nevertheless, if the structural and
nonstructural components create such a condition, these columns are
likely to be severely damaged during strong ground shaking.

Figure 2-8:
The short column
problem
2.2.2.6 Drift
Drift is the term used in seismic design to describe the horizontal deflec-
tion of structural members in response to seismic forces. In the seismic
code, limits are set on the amount of drift permitted. This is done to en-
sure that the structure will not be designed to be so flexible, even if
structurally sound, that its nonstructural components will be unaccept-
ably damaged. Drift is limited on a story basis. The allowable story drift is
limited to floor-to-floor height times 0.010 (1 percent of the floor height)
for essential buildings and 0.015 (1.5 percent of the floor height) if the
nonstructural components have been designed to accommodate drift. A
story drift of 0.010 is equivalent to a deflection of 1-1/2 inches for a floor-
to-floor height of 12 feet 6 inches (Figure 2-9).
Figure 2-9:
Allowable story drift

2.2.2.7 Configuration: Size and Shape
Experience has shown that the architectural form of a building has a

major influence on its performance during ground motion. This influ-
ence is the result of the three-dimensional interaction of all the structural
systems and all architectural components when subjected to earthquake
forces. For certain architectural forms, the response of the building can be-
come very complex and the earthquake forces can become concentrated
and distributed in undesirable ways. The term building configuration is used
in seismic design to determine the architectural form of the building.
The kinds of unusual conditions that warrant concern are a result of early
architectural decisions that determine the configuration of the building.
In making these decisions, the architect plays a major role in determining
the seismic performance of the building and can make it easy or difficult
for an engineer to develop an efficient and cost-effective structural de-
sign. For seismic design purposes, configuration can be defined as building
size and shape; the size and location of the structural elements; and the nature, size,
and location of nonstructural elements that may affect structural performance. The
latter include such elements as heavy and/or stiff nonstructural walls, stair-
cases and elevator shafts, exterior wall panels, and heavy equipment items.
The seismic significance of the building configuration is that it deter-

mines both the way forces are distributed throughout the structure and
the relative magnitude of those forces. Seismic codes distinguish between
regular and irregular configurations, and it is the latter that may have a
detrimental influence on the effectiveness of the seismic engineering and
on building seismic performance. Configuration irregularity results in two
main undesirable conditions—stress concentrations and torsional forces.
2.2.2.8 Stress Concentrations
Irregularities tend to create abrupt changes in strength or stiffness that

may concentrate forces in an undesirable way. Stress concentration means
that an undue proportion of the overall forces is concentrated at one or
a few points of the structure, such as a particular set of beams, columns,
or walls. Those few members may fail, and by chain reaction bring down
the whole building. Stress concentration can also be created by vertical ir-
regularity. The most serious condition of vertical irregularity occurs when
a building has a soft or weak story, usually the ground floor, which is sig-
nificantly weaker or more flexible than those above. This design creates a
major stress concentration at the points of discontinuity, and in extreme
cases may lead to collapse unless adequate design is provided for such
points. Figure 2-10 shows some types of soft story design, and Figure 2-11
shows the collapse mechanism that is created.

Figure 2-10:
Types of soft and weak
story structures
Figure 2-11:
Soft story collapse
mechanism
The severe damage to Olive View Hospital in 1971, described in Section

2.3.1.1, was largely the result of a soft first story design. Such soft or weak
stories are not permitted in current seismic designs.
2.2.2.9 Torsional Forces
Irregularities in building configuration may

produce torsional forces, which complicates The IBC lists a dozen conditions of
the analysis of building resistance. Torsion irregularity (six horizontal and six vertical)
is created by a lack of balance between the for which special design requirements
location of the resisting elements and the ar- apply. These special requirements either
rangement of the building mass. Engineers restrict the level of irregularity, amplify
refer to this as eccentricity between the center forces to account for it, or require more
of mass and the center of resistance, which sophisticated analysis. A severe soft first
tends to make the building rotate around the story is specifically prohibited, although it
latter and create torsion within the resisting is often encountered in existing buildings.
elements.

As explained in Section 2.2.1.1, the weight of the floors, walls, and roof
contributes to the main lateral forces exerted on the structure through the
center of mass, usually the geometric center of the floor plan. If the resis-
tance provided by the building components is exerted through this same
point (the center of resistance), then there is no torsion and balance is
maintained. As shown in Figure 2-12, conditions of eccentricity—when the
centers of mass and resistance are offset—produce torsional forces.
Figure 2-12:
Torsion
One building configuration that is most likely to produce torsion features

re-entrant corners (buildings shaped in plan like an “L” or a “T,” for ex-
ample). The wings of such buildings tend to twist and result in torsion
and stress concentration at the “notch” where the wings meet, also called
a re-entrant corner (Figure 2-13).
Figure 2-13:
The re-entrant corner
building

Buildings that have large variations in their perimeter resistance on
different facades of the building also tend to produce torsion. Such varia-
tions often occur when some facades have large areas of glazing while the
others have solid walls.
Irregular configurations generally arise because of functional planning

and programming requirements, or sometimes because of the architect’s
or owner’s desire to create an original or striking architectural form.
Hospitals often have irregular and complicated configurations as a re-

sult of their functional complexity. Broadly speaking, smaller hospitals
are usually planned in one or two stories with horizontal-planned lay-
outs; large hospitals often have a vertical tower for patient rooms elevated
above horizontally planned floors for the diagnostic, treatment, and ad-
ministrative services. Emergency services are generally placed at the
ground floor level, with direct access for emergency vehicles. However,
new developments in hospital design (see Section 1.2.4) represent a rad-
ical departure from this traditional hospital morphology. The new designs
are based on decentralization of functions, and the introduction of nat-
ural environment into hospital buildings. New hospital buildings have
even more complex configurations consisting of fragmented blocks inter-
spersed with courtyards and gardens, where different blocks frequently
have not only different shapes, but different structural systems as well.
The structural design for a hospital, however, should still focus on re-
ducing configuration irregularities to the greatest extent possible and
ensuring direct load paths. Framing systems need careful design to
provide the great variety of spatial types necessary without introducing lo-
calized irregularities (Figure 2-14).
Figure 2-14:
Complex footprint of
a large community
hospital. Shaded
areas represent open
courtyards.

2.2.3 Specifications for Performance-
Based Seismic Design
Beginning with the 1989 Loma Prieta earthquake in the San Francisco Bay
Area, the importance of the consequences of damage, other than endan-
gering life safety, has been increasingly recognized, not only in hospitals
and other critical facilities, but in all buildings. A major effort to develop
guidelines for seismic rehabilitation of buildings was funded by FEMA in
1992, and published as FEMA 273 (1997). Subsequently, this guideline was
improved and republished as FEMA 356 (2000), and in 2007 was made a
standard by the American Society of Civil Engineers (ASCE 41).
2.2.3.1 Performance Levels
As a result of the high cost of retrofit and the growing interest in un-
derstanding the various performance levels of buildings in earthquakes,
FEMA 273 described a variety of seismic performances for both struc-
tural and nonstructural systems that could be targeted in design. These
performances were summarized in a matrix (see Table 2-1) that allowed
specification of a given performance level by combining the desired struc-
tural performance with a desired nonstructural performance. Four overall
performances levels from that table were highlighted as discussed below.
These performance levels were developed to be applicable to any building
with any occupancy, as appropriate.
Table 2-1: Combinations of Structural and Nonstructural Seismic Performance
Structural Performance Levels and Ranges

Nonstructural S-1 S-2 S-3 S-4 S-5 S-6
Performance Immediate Damage Control Life Limited Safety Collapse Not
Levels Occupancy Range Safety Range Prevention Considered
N-A Operational Not Not Not Not

2-A
Operational 1‑A recommended recommended recommended recommended
Immediate
N-B Not Not Not
Occupancy 2-B 3-B
Immediate Occupancy 1‑B
recommended recommended recommended
N-C Life Safety

1-C 2-C 4-C 5-C 6-C
Life Safety 3‑C
N-D Not
2-D 3-D 4-D 5-D 6-D
Hazards Reduced recommended
N-E Not Not Not Collapse No

4-E
Not Considered recommended recommended recommended Prevention 5‑E rehabilitation

Operational Building Performance Level (1-A)
Buildings meeting this target building performance level are expected to

sustain minimal or no damage to their structural and nonstructural com-
ponents. The building would be able to continue its normal operations,
possibly with only slight adjustments, mainly with respect to power, water,
and other utilities that may need to be provided from emergency sources.
Under low levels of earthquake ground motion, most hospitals should be

able to meet or exceed this target building performance level. However,
it would not be cost-effective to design buildings for this target building
performance level under very rare, intense ground shaking, except for
buildings that offer unique services or that contain exceptionally haz-
ardous material.
Full functionality is normally considered difficult to achieve in the imme-

diate aftermath of strong earthquake shaking. Offsite issues, such as staff
availability and potential loss of utilities that are not under the control
of the facility, may impair operations. In addition, relatively minor onsite
damage to key components can significantly affect overall functionality.
A single anchorage failure of the emergency generator, or a leak in one
of the many pressurized water systems, can significantly disrupt hospital
operations.
Immediate Occupancy Building Performance Level (1-B)
Buildings meeting this target building performance level are expected

to sustain minimal damage to their structural elements and only minor
damage to their nonstructural components. While it would be safe to
reoccupy a building meeting this target building performance level im-
mediately following a major earthquake, nonstructural systems may not
function, either because of the lack of electrical power or damage to
fragile equipment. Therefore, although immediate occupancy is pos-
sible, it may be necessary to perform some cleanup and repair and await
the restoration of utility services before the building can function in a
normal mode. The risk of casualties at this target building performance
level is very low.
Many building owners may wish to achieve this level of performance

when the building is subjected to moderate earthquake ground mo-
tion. In addition, some owners may desire such performance for very
important buildings under severe earthquake ground shaking. This
level provides most of the protection obtained under the Operational
Building Performance Level, without the cost of providing full standby
utilities and performing rigorous seismic qualification of equipment
performance.

Immediate Occupancy is more realistic than the Operational perfor-
mance level for most buildings, and at a minimum, should be the goal of
all new hospital buildings. However, since even the smallest disruption of
non-structural systems may be too detrimental for continued operation
of a hospital, the owners and designers should consider a higher level of
protection for critical hospital functions. For instance, it is recommended
that provisions be made for independent operation of critical utilities
for a minimum of 4 days. Critical utilities usually include electric power;
water; the sanitary sewer; and, depending on the local weather conditions,
fuel for heating and cooling.
Life Safety Building Performance Level (3-C)
Buildings meeting this performance level may experience extensive

damage to structural and nonstructural components. Repairs may be re-
quired before re-occupancy of the building is allowed, although in some
cases the repair may not be deemed cost-effective. The risk of casualties in
buildings meeting this target building performance level is low.
This target building performance level entails somewhat more extensive

damage than anticipated for new buildings that have been properly de-
signed and constructed for seismic resistance.
The Life Safety level should prevent significant casualties among able-
bodied hospital occupants, but may not protect bed-ridden patients. In
these circumstances, life safety level of protection is not appropriate for
new hospitals.
Collapse Prevention Building Performance Level (5-E)
Although buildings meeting this target building performance level

may pose a significant hazard to life safety resulting from failure of
nonstructural components, significant loss of life may be avoided by pre-
venting collapse of the entire building. Many buildings meeting this
performance level may, however, be complete economic losses.
This level has been sometimes selected as the basis for mandatory seismic
rehabilitation ordinances enacted by municipalities, as it results in mit-
igation of the most severe life-safety hazards at the lowest cost. Collapse
Prevention is intended to prevent only the most egregious structural
failures, and includes no consideration for continued occupancy and
functionality of a hospital, the economics of damage repair, or damage to
nonstructural components.

2.2.3.2 New Developments in Performance-Based
Design
Although developed for use in the process of seismic rehabilitation of

older buildings, the aforementioned damage descriptions have filled a
void and have become an interim standard for describing seismic perfor-
mance of both new and existing buildings.
The goal of performance-based earthquake engineering has thus become

the development of methods to predict the expected losses adequately,
measured by the risk of casualties, the cost of damage repair, and the
length of building downtime. These losses are to be calculated on a cumu-
lative and probabilistic basis, allowing communication with stakeholders
based on losses in a given scenario earthquake, the losses due to a prob-
abilistically determined event, or the average annual losses over a given
time period.
Since the publication of FEMA 273, performance-based earthquake

engineering has continued to develop, particularly through research per-
formed at the Pacific Earthquake Engineering Research Center, one of
three major earthquake research centers funded by the National Science
Foundation, and through the FEMA funded project, Next Generation Per-
formance-Based Seismic Design Guidelines, FEMA 445 (2006). When this
work is completed, the global performance states used by FEMA 356 will
be redefined better to reflect current knowledge and to communicate the
potential losses to stakeholders more effectively.
The example of California shows how earthquake damage affects legislation. The 1971 San
Fernando earthquake was particularly damaging to hospital buildings, most notably the Olive
View Medical Center, a brand new facility that was damaged so badly that it was eventually
demolished. Based on similar experiences with schools, the legislature passed the Hospital Seismic
Safety Act (HSSA) in 1972. The intent of the law was both to protect acute care patients and
to provide post-earthquake medical care. The law was patterned after the Field Act covering
schools in California, specifying the same State review agency, and stipulating design by specially
experienced and approved “Structural Engineers.” It covered new buildings only and provided for
a “Building Safety Board” of industry design professionals and facility experts, appointed by the
Director of Health Services, to advise the State on implementation of requirements.
The law and regulations included four main considerations:
m Geologic hazard studies for sites
m Structural design forces in excess of those used for “normal” buildings (initially a “K-factor” of
3.0; later, an importance factor, I, of 1.5)

Fema577 Design Guide

Uploaded by

Copyright:

Available Formats

Fema577 Design Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fema577 Design Guide

Uploaded by

Copyright:

Available Formats

Risk Management Series

Risk Management Series

Design Guide for

This publication is the latest addition to FEMA’s Risk Management Series,

FOREWORD AND ACKNOWLEDGMENTS 

OBJECTIVE AND SCOPE

The objective of the “Design Guide for Improving Hospital Safety in

The information presented in this publication provides an exhaustive re-

ORGANIZATION AND CONTENT

The Design Guide is organized around three specific natural hazards:

Chapter 1 presents an overview of the principal considerations deter-

Chapter 2 examines potential earthquake damage to hospitals, and how

ii FOREWORD AND ACKNOWLEDGMENTS

Chapter 4 discusses the effects of wind forces on hospitals’ structural and

Christopher Arnold, Building Systems Development, Inc.

William B. Holmes, Rutherford and Chekene

Rebecca C. Quinn, RCQuinn Consulting, Inc.

Thomas L. Smith, TLSmith Consulting

Bogdan Srdanovic, URS Corporation

Wilbur Tussler, Consultant

FOREWORD AND ACKNOWLEDGMENTS iii

Milagros Nanita Kennett, FEMA, Project Officer, Risk Management Series

Eric Letvin, URS Corporation, Project Manager

Susan Patton, URS Corporation

Rob Fernandez, URS Corporation

Ivy Porpotage, URS Corporation

Wanda Rizer, design4impact

Project Advisory Panel:

Amar Chaker (AEI), American Society of Civil Engineers (ASCE)

Ken Dickerman, AIA Academy of Architecture and Health

Skip Gregory, Florida Agency for Health Care Administration

Mike Kuechenmeister, American Society of Healthcare Engineering

Jim Rossberg (SEI), American Society of Civil Engineers (ASCE)

John Sullivan, Portland Cement Association

This manual will be revised periodically, and FEMA welcomes com-

iv FOREWORD AND ACKNOWLEDGMENTS

FOREWORD AND ACknowledgments....................................................................... i

1 HOSPITAL DESIGN CONSIDERATIONS. ........................................................... 1-1

1.1 Introduction......................................................................................................................... 1-1

1.2 Health Care Industry............................................................................................................. 1-3

1.3 Hazard Mitigation................................................................................................................. 1-8

1.4 Hospital Design and Construction.......................................................................................... 1-17

1.5 Multi-Hazard Design Considerations...................................................................................... 1-20

1.6 References......................................................................................................................... 1-32

2 MAKING HOSPITALS SAFE FROM EARTHQUAKES.................................. 2-1

2.1 Introduction......................................................................................................................... 2-1

2.2 Seismic Building Design . ..................................................................................................... 2-11

2.3 Earthquake Damage to Hospitals........................................................................................... 2-29

2.4 Risk Reduction Measures..................................................................................................... 2-57

TABLE OF CONTENTS vii

2.5 Checklist for Seismic Vulnerability of Hospitals........................................................................ 2-80

2.6 References and Sources of Additional Information.................................................................... 2-84

3 MAKING HOSPITALS SAFE FROM FLO0DING............................................ 3-1

3.1 General Design Considerations................................................................................................ 3-1

viii TABLE OF CONTENTS

3.2 Hospitals Exposed to Flooding ............................................................................................. 3-33

3.3 Requirements and Best Practices in Flood Hazard Areas............................................................ 3-47

3.4 Risk Reduction for Existing Hospitals..................................................................................... 3-73

3.5 Checklist for Building Vulnerability of Flood-Prone Hospitals...................................................... 3-90

3.6 References and Sources of Additional Information.................................................................... 3-98

FOREWORD AND ACKNOWLEDGMENTS