Acrylic WaterProofing Liquide TDS

ACRYLIC ROOFKOTE
Elastic Acrylic Waterproof Coating
Product Description ACRYLIC ROOFKOTE is made of 100% pure acrylic

WATERPROOFING SYSTEM
emulsion paint coating designed primarily for used as a
roofing waterproof and general waterproof. It is UV
resistance. ACRYLIC ROOFKOTE adheres practically on
every surface. It is highly flexible and be able to fill hairline
cracks. This product penetrates deep into pores of
masonry and concrete.
Uses & Applications • Use as both functional coating and decorative coating.
• Concrete deck roofing.
• Coat on concrete surface of building before topcoat.
• Balcony membrane system.
• Masonry facade waterproofing.
• Coat over minor cracks on concrete surface.
Key Benefits • Monolithic membrane. Excellent waterproofing property.

• Water based. Easy to handle.
• Great elasticity, allow material to elongate and stay intact on the concrete surface of
building in case cracks occurred due to vibration or temperature.
• Good adhesion with most types of surface.
• Good UV Resistance and weather endurance.
• Crack bridging.
• Excellent stain resistance.
Technical Data CHARACTERISTICS RESULTS TEST METHOD

Solid Content 60 ± 2 % -
Density 1.30 ± 0.05 ASTM D1475
Viscosity 18,000 - 25,000 cps Brookfield Viscometer
Hardness 65 - 75 Shore A ASTM D2240
Elongation 500 % ASTM D412
Tensile Strength 2.5 N/mm2 ASTM D412
Bond Strength 1.2 MPa -
Water Absorption 0.05 liter/m2 (24h) -
Permeability 0 -
Drying Time 1-2 hours -
Full Cure Time 7 days -
CLEVCON (THAILAND) CO., LTD. 1 of 3 Acrylic Roofkote - TDS

All rights reserved. EN.3.16.01.2019
FM-RD-07/Rev.01
ACRYLIC ROOFKOTE
Application Instructions
SURFACE PREPARATION
• Newly poured concrete must be at least 7 days old.
• All surfaces must be clean, dry, free from surface contaminants and structurally sound.
Surface preparation may be carried out by the use of pressure water cleaning, power
buffing or scraping. Mold and fungus infested walls should have sodium hypochlorite
applied to the substrate prior to pressure washing.
• Any structural cracks should be saw cut and struck smooth with a cementations or
low shrink grouting compound.
PRIMING
• Add clean water 20-30% to mix for primer. Allow primer o dry.
PAINTING
• Thoroughly mix material well with low speed electric stirrer.
• Apply by brush, spray or roller. Apply ACRYLIC ROOFKOTE in multiple coats to
coverage of no more than 2 m2 per kg. Otherwise the film will spread too thin.
• Allow the product to dry between coats (usually 2 hrs.) Apply the later coat in the
perpendicular direction with the previous coat.
• ACRYLIC ROOFKOTE can be used in conjunction with reinforce fiberglass mesh to
improve resistance of wear and tear.
• To achieve smooth finish, 5-10% of clean water may be added to mix for topcoat.

FM-RD-07/Rev.01
ACRYLIC ROOFKOTE
Consumption Rate Coat Total DFT. Coverage per pail

0.5-0.7 kg/m2/coat 2-4 700-1000 micron 10-13 m2
* Coverage rate may vary due to porosity of surface including application method. Field trials are recommended.
CLEANING
• Tools and equipment should be cleaned whilst screed is still wet using clean water.
Hands and skin should be cleaned immediately with clean water.
Precaution: Avoid working on rainy day. Before using ACRYLIC ROOFKOTE, please ensure
you have received and read carefully both the hazard level applied on the container and
the relevant material safety datasheet.
Safety Instructions Wear appropriate protective equipment such as gloves, safety glasses or goggles,
protective clothing during use. In case of eye contact: promptly wash eyes with plenty of
water. Continue to rinse for at least 15 minutes and consult physician immediately.
Packing 20 kg. per pail.

Standard color available in white, grey and green.
* Colors may vary from actual product due to print quality.
Storage & Shelf Life Material must be kept in-door at room temperature, avoid expose of direct sunlight. Product
Shelf life is 12 months in unopened package and under suitable storage condition.
Disclaimer: The information provided in this document is based on our knowledge and experience of the product. In actual application results may vary
because of site conditions, application methods and other factors that beyond our control. Users are recommended to test out product performance
before actual use. Any data contained in this document, including our sale person or staff consultation is in no way constitutes a warranty relative to the
use of our products. Our general terms and conditions of sales shall prevail. The superseded version of this datasheet may be issued without prior
notice. Customers and users are encouraged to check with our staffs for the latest version of this document.
CLEVCON (THAILAND) CO., LTD.
14/12 Moo 5, Bung Kham Proi., Lam Luk Ka, Pathum Thani, Thailand 12150
Tel: +66-2-569-1540 • Fax: +66-2-569-1541
Email: [email protected] • Website: www.clevconthai.com
ISO 9001:2015 Certified

FM-RD-07/Rev.01

Acrylic WaterProofing Liquide TDS

Uploaded by

Copyright:

Available Formats

Acrylic WaterProofing Liquide TDS

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Acrylic WaterProofing Liquide TDS

Uploaded by

Copyright:

Available Formats

ACRYLIC ROOFKOTE

Elastic Acrylic Waterproof Coating

Product Description ACRYLIC ROOFKOTE is made of 100% pure acrylic

Key Benefits • Monolithic membrane. Excellent waterproofing property.

Technical Data CHARACTERISTICS RESULTS TEST METHOD

CLEVCON (THAILAND) CO., LTD. 1 of 3 Acrylic Roofkote - TDS

CLEVCON (THAILAND) CO., LTD. 2 of 3 Acrylic Roofkote - TDS

Consumption Rate Coat Total DFT. Coverage per pail

Packing 20 kg. per pail.

* Colors may vary from actual product due to print quality.

CLEVCON (THAILAND) CO., LTD. 3 of 3 Acrylic Roofkote - TDS

You might also like