Masterkure 128 Tds

MasterKure® 128
Polymeric emulsion based, concrete curing compound
DESCRIPTION spray equipment (knapsack sprayer) or a wide short nap

MASTERKURE 128 is a ready to use, clear membrane roller, or brush. With all methods, take adequate care to
curing compound based on selected polymeric emulsion, prevent marring of concrete surface. Apply the curing
which when applied on to freshly placed concrete compound evenly on all exposed concrete surfaces.
surfaces provides an efficient curing membrane with It is important to avoid leaving patches of untreated
excellent non yellowing properties. areas. Use MASTERKURE 128FD (with the fugitive dye)
The curing compound is also offered with a fugitive dye to identify areas treated, or ensure that there are no
as MASTERKURE 128FD for easier identification of breaks during application until a well marked area is
coated areas. completely treated.
FIELDS OF APPLICATION CLEANING

MASTERKURE 128 is suitable for curing all general Clean the tools and equipment using water.
purpose freshly placed or deshuttered concrete and
mortar, both indoors and outdoors, such as;
ESTIMATING DATA
▪ Concrete floors Actual coverage depends upon the method of application,
▪ Exposed architectural concrete the texture and porosity of the surface. As a guide,
coverage on a smooth dense surface will be
approximately 12 m2 /L, while for a porous, rough surface
FEATURES AND BENEFITS it will be approximately 6 m2 /L.
Greater moisture Facilitates more efficient hydration Therefore material requirement will be between 0.2 and
retention in of cement for greater strength and 0.08 L/m2
mortar and superior wear resistance.
concrete
PACKAGING
Non staining Suitable for exposed architectural MASTERKURE 128 is available in 20 L pails and 205 L
concrete
Drums.
Available with a Treated area easily identifiable.
fugitive dye No wasteful repetitive coatings or SHELF LIFE
risk of untreated areas.
MASTERKURE 128 can be stored in tightly sealed
original containers for 12 months from date of
PROPERTIES manufacture at constant moderate temperature.
Supply form : liquid
Colour : White (for MASTERKURE 128)
PRECAUTIONS
Coloured (for MASTERKURE 128FD)
Density : 1.01 kg/L Health : MASTERKURE 128 is non toxic but can
cause irritation to persons with sensitive skin if ex-
posed and respiratory reaction if inhaled.
APPLICATION
Safety : Wear eye protection, gloves and mask while
Use MASTERKURE 128 as supplied without dilution. It
should be applied after the final finishing operation as handling the product. Wash thoroughly after handling.
soon as the concrete or mortar surface has hardened In case of accidental eye contact wash with copious
sufficiently to prevent marring. amount of water and seek medical help.
The surface should be damp but with no free water on it. If ingested drink a glass of water and do not induce
In the case of formed concrete, apply immediately after vomiting. Consult doctor immediately.
striking the formwork. Delaying the application until the Fire : Not flammable.
next day will allow substantial loss of moisture reducing For detailed Health, Safety and Environmental
the effectiveness of the curing membrane. recommendations, please consult and follow all
For best results, apply an even coat by a low pressure instructions on the product Material Safety Data
Sheet.
Page 1 of 2
MasterKure® 128
Polymeric emulsion based, concrete curing compound
® = registered trademark of a MBCC Group member in many countries of the world MID#MasterKure128 - 02.2021
The technical information and application advice given in this Master Builders Solutions publication are based on
STATEMENT OF the present state of our best scientific and practical knowledge. As the information herein is of a general nature, no
RESPONSIBILITY assumption can be made as to a product's suitability for a particular use or application and no warranty as to its
accuracy, reliability or completeness either expressed or implied is given other than those required by law. The user
is responsible for checking the suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by Master Builders
NOTE Solutions either orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since
they, and not Master Builders Solutions, are responsible for carrying out procedures appropriate to a specific appli-
cation.
PT Master Builders Solutions Indonesia

Jl. Jababeka V Blok I No 1, Kawasan Industrial Estate
Jababeka 1, Pasirgombong, West Cikarang,
Bekasi, West Java 17530
www.master-builders-solutions.com/en-id
Page 2 of 2

Masterkure 128 Tds

Uploaded by

Copyright:

Available Formats

Masterkure 128 Tds

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Masterkure 128 Tds

Uploaded by

Copyright:

Available Formats

MasterKure® 128

Polymeric emulsion based, concrete curing compound

DESCRIPTION spray equipment (knapsack sprayer) or a wide short nap

FIELDS OF APPLICATION CLEANING

PT Master Builders Solutions Indonesia

You might also like