Scribd
Upload
28 views3 pages

Homework 2.mcdx

This document contains the calculations to determine the shear reinforcement requirements for a concrete beam. It provides the beam dimensions, material properties, and applied shear force. It then calculates the maximum, critical, and minimum shear capacities of the beam. It determines that shear reinforcement is required since the applied shear exceeds half the critical shear capacity. It calculates the required amount, spacing, and number of shear reinforcement bars.

Uploaded by

Willy Sowath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views3 pages

Homework 2.mcdx

This document contains the calculations to determine the shear reinforcement requirements for a concrete beam. It provides the beam dimensions, material properties, and applied shear force. It then calculates the maximum, critical, and minimum shear capacities of the beam. It determines that shear reinforcement is required since the applied shear exceeds half the critical shear capacity. It calculates the required amount, spacing, and number of shear reinforcement bars.

Uploaded by

Willy Sowath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Name: Nong Sithai

ID: TSI210051

Homework 2

Given

- Cross section area b ≔ 300 mm h ≔ 700 mm

- Cover c ≔ 30 mm

- Diameter of tie bar dtb ≔ 12 mm

- Diameter of main bar Db ≔ 25 mm

- Number of main bar n≔8

- Number of tie bar ntb ≔ 4 legs

- Concrete strength f'c ≔ 32 MPa

- Yield strength of main bar fsy ≔ 420 MPa

- Yield strength of tie bar fsy.f ≔ 235 MPa

- External shear V*:= 200 kN

- Considered no axial force

- Find Vu.max Vuc and Vu.min

+ For Vu.max

Since bv ≔ b = 300 mm
⎛ Db ⎞
do ≔ h - ⎜c + dtb + ―⎟ = 645.5 mm
⎝ 2 ⎠
Pv ≔ 0 No prestress

We have Vu.max ≔ 0.2 ⋅ f'c ⋅ bv ⋅ do + Pv = 1239.36 kN

ϕVv.max ≔ 0.7 ⋅ Vu.max = 867.55 kN

+ For Vuc
⎛ do ⎞
Since β1 ＝ 1.1 ⎜1.6 - ――⎟ ≥ 1.1
⎝ 1000 ⎠
⎛ do ⎞
1.1 ⎜1.6 - ―――― ⎟ = 1.05
⎝ 1000 mm ⎠
β1 ≔ 1.1

β2 ≔ 1 No axial force

2 ⋅ do
1 ≤ ――≤ 2
av
β2 ≔ 1

2 ⋅ do
β3 : 1 ≤ ――≤ 2
av
2 ⋅ 645.5
―――= 0.65
2000
β3 ≔ 1
Db 2
Ast ≔ π ⋅ ―― ⋅ n = 3926.99 mm 2 1
4 ―
3 2
⎛ Ast ⋅ f'c ⎞ ―
3
We have Vuc ≔ β1 ⋅ β2 ⋅ β3 ⋅ bv ⋅ do ⋅ ⎜――― ⎟ ⋅ MPa = 184.42 kN
⎝ bv ⋅ do ⎠
ϕVuc ≔ 0.7 ⋅ Vuc = 129.09 kN

+ For Vu.min

Vu.min ≔ Vuc + 0.6 ⋅ bv ⋅ do ⋅ MPa = 300.61 kN

ϕVu.min ≔ 0.7 ⋅ Vu.min = 210.43 kN

- Compare V* with ϕVu.max

V* < ϕVu.max

- Compare V* with 0.5 ⋅ ϕVuc

0.5 ⋅ ϕVuc = 64.55 kN

V* > 0.5 ⋅ ϕVuc

- Compare V* andϕVu.min

V* < ϕVu.min

SinceV* > 0.5 ⋅ ϕVuc Shear reinforcement required


⎛ V*- ϕVumin ⎞
θv ＝ 30 ° + 15 ° ⎜―――――― ⎟
⎝ ϕVvmax - ϕVumin ⎠

⎛ 200 - 210.43 ⎞
θv ≔ 30 ° + 15 ° ⋅ ⎜―――――⎟ = 29.76 °
⎝ 867.55 - 210.43 ⎠
Asv bv
―― ＝0.35
. ⋅ ―― ⋅ MPa = 0.45 mm
s fsy.f
⎛ Ast ⎞
We have Vus ＝ ⎜―― ⋅ fsy.f ⋅ do⎟ ⋅ cot ⎛⎝θv⎞⎠
⎝ s ⎠
Vus ≔ ⎛⎝0.45 mm ⋅ fsy.f ⋅ do⎞⎠ ⋅ cot ⎛⎝θv⎞⎠ = 119.38 kN

ϕVus ≔ 0.7 ⋅ Vus = 83.56 kN

ϕVus < V*

Suppose ϕVus = V*

s ≤ min ((0.5 ⋅ h , 300))

min ((0.5 ⋅ h , 300 mm )) = 300 mm


min ((0.5 ⋅ h , 300 mm )) = 300 mm

s ≔ 300 mm
⎛ Asv ⎞
0.7 ⎜―― ⋅ fsy.f ⋅ do⎟ ⋅ cot ⎛⎝θv⎞⎠ ＝ 200 ⋅ 10 3 N
⎝ s ⎠
200 ⋅ 10 3 N ⋅ s
Asv ≔ ――――――― = 323.11 mm 2
0.7 ⋅ fsy.f ⋅ do ⋅ cot ⎛⎝θv⎞⎠

dtb 2
Av ≔ π ⋅ ―― ⋅ ntb = 452.39 mm 2
4
Asv
We have N ≔ ―― = 0.71=1
Av
Hence, shear reinforcement is 1RB12@300

You might also like