Scribd
Upload
21 views

Css 1 LP Final

The document outlines a lesson plan for a computer servicing class. It discusses learning competencies around installing and configuring computer systems. Students will learn to identify tools for computer assembly and disassembly. The lesson will involve students forming groups to answer questions, discussing steps in assembly and disassembly, and performing hands-on assembly and disassembly of computer hardware. Students will be evaluated through a quiz on identifying appropriate materials and safety equipment.

Uploaded by

Kevin Kregel Campollo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
21 views

Css 1 LP Final

The document outlines a lesson plan for a computer servicing class. It discusses learning competencies around installing and configuring computer systems. Students will learn to identify tools for computer assembly and disassembly. The lesson will involve students forming groups to answer questions, discussing steps in assembly and disassembly, and performing hands-on assembly and disassembly of computer hardware. Students will be evaluated through a quiz on identifying appropriate materials and safety equipment.

Uploaded by

Kevin Kregel Campollo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

NOTRE DAME OF MIDSAYAP COLLEGE

Lesson Plan for CSS1


Schedule: NOVEMBER 28, 2022 (1:00-4:00 W)

I. Content Standard
The learners demonstrate an understanding of concepts and principles in installing
configuring computer systems
II. Learning Competencies
 Obtain tools, equipment and testing devices needed to carry out installation work in
accordance with established procedures and check for correct operation and safety
 Assemble computer hardware in accordance with established procedures and system
requirements
III. Learning Outcomes:
The learners must:
 Identify the tools and equipment and steps in assembling and disassembling
 Discuss the tools and equipment and steps in assembling and disassembling
 Perform computer hardware disassembly and assembly.

IV. Learning Content

Computer Assembly and Diassembly

V. References
TVL – Computer Systems Servicing Quarter 7 – Module 3: Computer Hardware Disassembly
and Assembly

VI. Materials
Book, Laptop & TV
VII. Procedure (Activity, Analysis, Abstraction, Application)
1. Preliminary Activities (Prayer, Greetings, Literary Review, Motivation)
Review:
Anyone who can recall the topic last week?

Motivation:

ACTIVITY
The students will form a group of five and they will answer the Given Question?

ANALYSIS
1. How do you find the activity?
2. What words were formed when you connect the texts and pictures?
3. How did you solve the puzzle?

ABSTRACTION
Lesson 9
LAN Card – is a network interface card. This is a computer circuit board or card that is
installed in a computer so that it can be connected to a network.
Server – is a part of a network. It is a special computer that users on the network can
access to carry out a particular job.
Port hub /Port – is a connector on the back of a computer or other device. A port is either a
serial port or a parallel port.
Modem - (Modulator-Demodulator) The modem is a device that allows a given computer to
share data or otherwise a device which let computers exchange information
Scanner- it is an input device that read text or illustration printed on paper, translates the
information into a form that a computer can use.
Printer - is a piece of hardware that produces a paper copy (also known as „hardcopy‟) of
the information generated by the computer.
Pliers is a hand tool used to hold objects firmly, for bending, or physical compression.
Soldering gun is a tool for soldering metals using tin-based solder to achieve a highly
conductive contact. Desoldering tools are used for removing the molten solder so that the
joint may be separated.
Flat Screw Driver – is used to drive or fasten negative slotted screws. Philips Screw Driver-
is used to drive or fasten positive slotted screws.
Allen wrench (also known by various other synonyms) is a tool of hexagonal cross-section
used to drive bolts and screws that have a hexagonal socket in the head. Pliers and
tweezers - are used for picking small parts in the computer unit.
Crimping tool- is a device used to crimp the RJ45 connector to the UTP cable. Multi-meter or
a multi-tester, also known as a VOM (Volt-Ohm meter), is an electronic measuring
instrument that combines several measurement functions in one unit.
LAN Tester – is a device used for testing the network connection. Protective Eyewear -
enclose or protect the eye area in order to prevent particulates, infectious fluids, or
chemicals from striking the eyes. Face Mask - covering for the face to prevent the inhaling or
absorbing dust and other chemicals. Anti-static wrist strap, mat and spray- are used for
eliminating electrostatic discharge in the work area.

APPLICATION
Direction: Fill in the empty cabin with the missing steps of the computer hardware
assembly.

Arranging Steps in Chronological Order


Directions: Rearrange the following steps in chronological order
A. Computer Hardware Disassembly
____1. Detaching the Hard Drive ____6. Removing the CPU fan
____2. Detaching the power supply ____7. Removing the

Memory (RAM)
____3. Opening the outer shell / case ____8. Removing the system

fan
____4. Pull Out the Motherboard ____9. Removing the
Video
Card
____5. Removing the CD / DVD Drives ____10. Unplugging all the cables
And wires

VIII. Evaluation:
Quiz:
The student will answer the given question.
6. Why is it important to identify the appropriate materials, tools, equipment,
testing devices, and protective equipment in disassembling and assembling
computer hardware? __________________________

IX. Assignment

Prepared by:

KEVIN KREGEL L. CAMPOLLO, LPT


Subject Teacher

You might also like