1712-1U-01G(09-19).

fm 1 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
09–19 WIPER/WASHER SYSTEM
LOCATION INDEX . . . . . . . . . . . . . . . . . 09–19–2 WINDSHIELD WASHER NOZZLE
Windshield Wiper and Washer System 09–19–2 ADJUSTMENT . . . . . . . . . . . . . . . . . . . . 09–19–10
Rear Wiper and Washer System . . . . . 09–19–3 WINDSHIELD WASHER NOZZLE
WIPER/WASHER SYSTEMS CLEANING . . . . . . . . . . . . . . . . . . . . . . . 09–19–11
WIRING DIAGRAM . . . . . . . . . . . . . . . . 09–19–4 WINDSHIELD WASHER NOZZLE
WINDSHIELD WIPER ARM AND BLADE REMOVAL . . . . . . . . . . . . . . . . . . . . . . . 09–19–11
ADJUSTMENT . . . . . . . . . . . . . . . . . . . 09–19–5 WINDSHIELD WASHER NOZZLE
WINDSHIELD WIPER ARM AND BLADE INSTALLATION . . . . . . . . . . . . . . . . . . . 09–19–11
REMOVAL/INSTALLATION . . . . . . . . . 09–19–5 WINDSHIELD WASHER HOSE
Windshield Wiper Arm REMOVAL/INSTALLATION . . . . . . . . . . 09–19–11
Installation Note . . . . . . . . . . . . . . . . . 09–19–5 REAR WIPER ARM AND BLADE
WINDSHIELD WIPER LINK ADJUSTMENT . . . . . . . . . . . . . . . . . . . . 09–19–12
REMOVAL/INSTALLATION . . . . . . . . . 09–19–5 REAR WIPER ARM AND BLADE
WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION . . . . . . . . . . 09–19–12
REMOVAL/INSTALLATION . . . . . . . . . 09–19–6 Rear Wiper Arm Installation Note . . . . . 09–19–12
WINDSHIELD WIPER MOTOR REAR WIPER MOTOR
INSPECTION . . . . . . . . . . . . . . . . . . . . . 09–19–6 REMOVAL/INSTALLATION . . . . . . . . . . 09–19–12
WASHER TANK REAR WIPER MOTOR INSPECTION . . . 09–19–13
REMOVAL/INSTALLATION . . . . . . . . . 09–19–7 REAR WASHER MOTOR
WINDSHIELD WASHER MOTOR REMOVAL/INSTALLATION . . . . . . . . . . 09–19–14
REMOVAL/INSTALLATION . . . . . . . . . 09–19–7 REAR WASHER MOTOR INSPECTION . 09–19–14
WINDSHIELD WASHER MOTOR REAR WASHER NOZZLE
INSPECTION . . . . . . . . . . . . . . . . . . . . . 09–19–8 REMOVAL/INSTALLATION . . . . . . . . . . 09–19–14
WASHER FLUID-LEVEL SENSOR REAR WASHER NOZZLE
REMOVAL/INSTALLATION . . . . . . . . . 09–19–8 ADJUSTMENT . . . . . . . . . . . . . . . . . . . . 09–19–15
WASHER FLUID-LEVEL SENSOR REAR WASHER NOZZLE CLEANING . . 09–19–15
09–19
INSPECTION . . . . . . . . . . . . . . . . . . . . . 09–19–8 REAR WASHER HOSE
WIPER AND WASHER SWITCH REMOVAL/INSTALLATION . . . . . . . . . . 09–19–15
REMOVAL/INSTALLATION . . . . . . . . . 09–19–9 INTERMITTENT REAR WIPER RELAY
WIPER AND WASHER SWITCH REMOVAL/INSTALLATION . . . . . . . . . . 09–19–16
INSPECTION . . . . . . . . . . . . . . . . . . . . . 09–19–9 INTERMITTENT REAR WIPER RELAY
Windshield Wiper and Washer. . . . . . . 09–19–9 INSPECTION . . . . . . . . . . . . . . . . . . . . . 09–19–16
Rear Wiper and Washer . . . . . . . . . . . 09–19–10 Terminal Voltage Table (Reference) . . 09–19–16

End of Toc

09–19–1
1712-1U-01G(09-19).fm 2 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
LOCATION INDEX
A3U091901063W01
Windshield Wiper and Washer System

Z3U0919W003

1 Windshield wiper arm and blade 6 Washer fluid-level sensor

(See 09–19–5 WINDSHIELD WIPER ARM AND (See 09–19–8 WASHER FLUID-LEVEL SENSOR
BLADE ADJUSTMENT) REMOVAL/INSTALLATION)
(See 09–19–5 WINDSHIELD WIPER ARM AND (See 09–19–8 WASHER FLUID-LEVEL SENSOR
BLADE REMOVAL/INSTALLATION) INSPECTION)
2 Windshield wiper link 7 Wiper and washer switch
(See 09–19–5 WINDSHIELD WIPER LINK (See 09–19–9 WIPER AND WASHER SWITCH
REMOVAL/INSTALLATION) REMOVAL/INSTALLATION)
3 Windshield wiper motor (See 09–19–9 WIPER AND WASHER SWITCH
(See 09–19–6 WINDSHIELD WIPER MOTOR INSPECTION)
REMOVAL/INSTALLATION) 8 Windshield washer nozzle
(See 09–19–6 WINDSHIELD WIPER MOTOR (See 09–19–10 WINDSHIELD WASHER NOZZLE
INSPECTION) ADJUSTMENT)
4 Washer tank (See 09–19–11 WINDSHIELD WASHER NOZZLE
(See 09–19–7 WASHER TANK REMOVAL/ CLEANING)
INSTALLATION) (See 09–19–11 WINDSHIELD WASHER NOZZLE
REMOVAL)
5 Windshield washer motor (See 09–19–11 WINDSHIELD WASHER NOZZLE
(See 09–19–7 WINDSHIELD WASHER MOTOR INSTALLATION)
REMOVAL/INSTALLATION)
(See 09–19–8 WINDSHIELD WASHER MOTOR 9 Windshield washer hose
INSPECTION) (See 09–19–11 WINDSHIELD WASHER HOSE
REMOVAL/INSTALLATION)

09–19–2
1712-1U-01G(09-19).fm 3 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
Rear Wiper and Washer System

A3U0919W109

1 Rear wiper arm and blade 6 Wiper and washer switch

(See 09–19–12 REAR WIPER ARM AND BLADE (See 09–19–9 WIPER AND WASHER SWITCH
ADJUSTMENT) REMOVAL/INSTALLATION)
(See 09–19–12 REAR WIPER ARM AND BLADE (See 09–19–9 WIPER AND WASHER SWITCH
REMOVAL/INSTALLATION) INSPECTION) 09–19
2 Rear wiper motor 7 Rear washer nozzle
(See 09–19–12 REAR WIPER MOTOR REMOVAL/ (See 09–19–15 REAR WASHER NOZZLE
INSTALLATION) ADJUSTMENT)
(See 09–19–13 REAR WIPER MOTOR (See 09–19–15 REAR WASHER NOZZLE
INSPECTION) CLEANING)
3 Windshield washer tank (See 09–19–14 REAR WASHER NOZZLE
(See 09–19–7 WASHER TANK REMOVAL/ REMOVAL/INSTALLATION)
INSTALLATION) 8 Rear washer hose
4 Rear washer motor (See 09–19–15 REAR WASHER HOSE REMOVAL/
(See 09–19–14 REAR WASHER MOTOR INSTALLATION)
REMOVAL/INSTALLATION) 9 Intermittent rear wiper relay
(See 09–19–14 REAR WASHER MOTOR (See 09–19–16 INTERMITTENT REAR WIPER
INSPECTION) RELAY REMOVAL/INSTALLATION)
5 Washer fluid-level sensor (See 09–19–16 INTERMITTENT REAR WIPER
(See 09–19–8 WASHER FLUID-LEVEL SENSOR RELAY INSPECTION)
REMOVAL/INSTALLATION)
(See 09–19–8 WASHER FLUID-LEVEL SENSOR
INSPECTION)

End Of Sie

09–19–3
1712-1U-01G(09-19).fm 4 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
WIPER/WASHER SYSTEMS WIRING DIAGRAM
A3U091901063W02

A3U0919W108

End Of Sie

09–19–4
1712-1U-01G(09-19).fm 5 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
WINDSHIELD WIPER ARM AND BLADE ADJUSTMENT
A3U091967320W01
1. Operate the windshield wiper motor to set the wipers in the park position.
2. Align the windshield wiper blades to the marks.
End Of Sie

X3U919WA4

WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION

A3U091967320W02
1. Remove in the order indicated in the table.
1 Cap
2 Nut
3 Windshield wiper arm
(See 09–19–5 Windshield Wiper Arm Installation
Note)
4 Windshield wiper blade
5 Rubber brush

2. Install in the reverse order of removal.

3. Adjust the windshield wiper arm and blade. (See 09–19
X3U919WA2
09–19–5 WINDSHIELD WIPER ARM AND
BLADE ADJUSTMENT.)

Windshield Wiper Arm Installation Note

1. Clean the windshield wiper arm connector shafts
using a wire brush before installing the windshield
wiper arms.
End Of Sie

X3U919WA3

WINDSHIELD WIPER LINK REMOVAL/INSTALLATION

A3U091967360W01
1. Remove the windshield wiper arm and blade. (See 09–19–5 WINDSHIELD WIPER ARM AND BLADE
REMOVAL/INSTALLATION.)
2. Remove the cowl grille. (See 09–16–1 COWL GRILLE REMOVAL/INSTALLATION.)
3. Pry off the connection between the windshield wiper motor and windshield wiper link.
4. Remove in the order indicated in the table.
1 Bolt
2 Windshield wiper link

5. Install in the reverse order of removal.

6. Adjust the windshield wiper arm and blade. (See
09–19–5 WINDSHIELD WIPER ARM AND
BLADE ADJUSTMENT.)
End Of Sie

X3U919WA5

09–19–5
1712-1U-01G(09-19).fm 6 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION
A3U091967340W01
1. Disconnect the negative battery cable.
2. Remove the windshield wiper arm and blade. (See 09–19–5 WINDSHIELD WIPER ARM AND BLADE
REMOVAL/INSTALLATION.)
3. Remove the cowl grille. (See 09–16–1 COWL GRILLE REMOVAL/INSTALLATION.)
4. Pry off the connection between the windshield wiper motor and windshield wiper link.
5. Remove in the order indicated in the table.
1 Connector
2 Bolt
3 Windshield wiper motor

6. Install in the reverse order of removal.

7. Adjust the windshield wiper arm and blade. (See
09–19–5 WINDSHIELD WIPER ARM AND
BLADE ADJUSTMENT.)
End Of Sie
X3U919WA0

WINDSHIELD WIPER MOTOR INSPECTION

A3U091967340W02
1. Disconnect the windshield wiper motor connector.
2. Connect battery positive voltage and inspect the
operation of the windshield wiper motor as
indicated below.
Terminal Operation
A High
C Low

3. Disconnect battery positive voltage from terminal

C of the motor while the wipers are operating.
4. Verify that the wipers do not stop in the park
position.
5. Short between terminal B and C of the motor and Z3U0919W001

connect battery positive voltage to terminal D of

the motor.
6. Verify that the wipers operate at low speed again, then stop in the park position.
• If not as specified, replace the windshield wiper motor.
End Of Sie

09–19–6
1712-1U-01G(09-19).fm 7 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
WASHER TANK REMOVAL/INSTALLATION
A3U091967480W01
1. Disconnect the negative battery cable.
2. Partially peel off the right side mud guard.
3. Partially remove the right side front bumper (if equipped with washer fluid-level sensor). (See 09–10–5 FRONT
BUMPER REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.

09–19

A3U0919W112

1 Bolt 4 Rear washer hose

2 Connector 5 Washer tank
3 Windshield washer hose

End Of Sie
WINDSHIELD WASHER MOTOR REMOVAL/INSTALLATION
A3U091976670W01
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See 09–19–7 WASHER TANK REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1 Windshield washer motor
2 Grommet

4. Install in the reverse order of removal.

End Of Sie

X3U919WA8

09–19–7
1712-1U-01G(09-19).fm 8 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
WINDSHIELD WASHER MOTOR INSPECTION
A3U091976670W02
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See 09–19–7 WASHER TANK REMOVAL/INSTALLATION.)
3. Connect battery positive voltage to the terminal B and ground to the terminal A of the motor.
4. Verify that the windshield washer motor operates.
• If the motor does not operate, replace the windshield washer motor.
End Of Sie

Y3U919WA3

WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION

A3U091967488W01
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See 09–19–7 WASHER TANK REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1 Washer fluid-level sensor
2 Grommet

4. Install in the reverse order of removal.

End Of Sie

X3U919WB0

WASHER FLUID-LEVEL SENSOR INSPECTION

A3U091967488W02
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See 09–19–7 WASHER TANK REMOVAL/INSTALLATION.)
3. Inspect for continuity between the washer fluid-level sensor terminals using an ohmmeter.
• If not as specified, replace the washer fluid-level sensor.

X3U919WB1

End Of Sie

Y3U919WA4

09–19–8
1712-1U-01G(09-19).fm 9 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
WIPER AND WASHER SWITCH REMOVAL/INSTALLATION
A3U091966122W01
1. Disconnect the negative battery cable.
2. Remove the column cover. (See 09–17–5 COLUMN COVER REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1 Connector
2 Screw
3 Wiper and washer switch

4. Install in the reverse order of removal.

End Of Sie

X3U919WB7

WIPER AND WASHER SWITCH INSPECTION

A3U091966122W02
Windshield Wiper and Washer
1. Disconnect the negative battery cable.
2. Remove the wiper and washer switch. (See 09–19–9 WIPER AND WASHER SWITCH REMOVAL/
INSTALLATION.)
3. Inspect for continuity between the wiper and
washer switch terminals using an ohmmeter.
• If not as specified, replace the wiper and
washer switch.

09–19

X3U919WB8

Y3U919WA5

09–19–9
1712-1U-01G(09-19).fm 10 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
Rear Wiper and Washer
1. Disconnect the negative battery cable.
2. Remove the wiper and washer switch. (See 09–19–9 WIPER AND WASHER SWITCH REMOVAL/
INSTALLATION.)
3. Inspect for continuity between the wiper and
washer switch terminals using an ohmmeter.
• If not as specified, replace the wiper and
washer switch.

A3U0919W017

End Of Sie

A3U0919W107

WINDSHIELD WASHER NOZZLE ADJUSTMENT

A3U091967510W01
1. Insert a needle or equivalent tool into the spray
hole of the windshield washer nozzle and adjust
the nozzle direction as shown.
End Of Sie

Y3U919WA6

09–19–10
1712-1U-01G(09-19).fm 11 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
WINDSHIELD WASHER NOZZLE CLEANING
A3U091967510W02
1. Clean the washer nozzle by inserting and moving
a needle or similar tool back and forth.
• If the nozzle becomes clogged again after
cleaning, remove the hose from washer
nozzle. Make sure there is enough washer
fluid. Then turn the washer switch on and
flush the inside of the hose.
End Of Sie

Y3U919WA7

WINDSHIELD WASHER NOZZLE REMOVAL

A3U091967510W03
1. Remove the bonnet insulator.
2. Disconnect the windshield washer hose to windshield washer nozzle.
3. Remove the windshield washer nozzle using a 10
mm {0.4 in} deep socket wrench from
underneath the bonnet.
End Of Sie

09–19
X3U919WB3

WINDSHIELD WASHER NOZZLE INSTALLATION

A3U091967510W04
1. Connect the windshield washer hose to windshield washer nozzle.
2. Push the windshield washer nozzle into the installation hole.
3. Adjust the windshield washer nozzle. (See 09–19–10 WINDSHIELD WASHER NOZZLE ADJUSTMENT.)
4. Install the bonnet insulator.
End Of Sie
WINDSHIELD WASHER HOSE REMOVAL/INSTALLATION
A3U091967500W01
1. Remove the bonnet insulator.
2. Partially peel off the right side mud guard.
3. Remove in the order indicated in the table.
1 Clip
2 Joint pipe
3 Windshield washer hose

4. Install in the reverse order of removal.

End Of Sie

X3U919WB6

09–19–11
1712-1U-01G(09-19).fm 12 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
REAR WIPER ARM AND BLADE ADJUSTMENT
A3U091967420W01
1. Operate the rear wiper motor to set the wiper in the park position.
2. Set the rear wiper arm height as shown.
End Of Sie

A3U0919W008

REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION

A3U091967420W02
1. Remove in the order indicated in the table.
1 Nut
2 Rear wiper arm
(See 09–19–12 Rear Wiper Arm Installation Note)
3 Rear wiper blade
4 Rubber brush

2. Install in the reverse order of removal.

3. Adjust the rear wiper arm and blade. (See 09–19–
12 REAR WIPER ARM AND BLADE
ADJUSTMENT.)
A3U0919W006

Rear Wiper Arm Installation Note

1. Clean the rear wiper arm connector shaft using a
wire brush before installing the rear wiper arm.
End Of Sie

YMU919WAR

REAR WIPER MOTOR REMOVAL/INSTALLATION

A3U091967450W01
1. Disconnect the negative battery cable.
2. Remove the rear wiper arm and blade. (See 09–19–12 REAR WIPER ARM AND BLADE REMOVAL/
INSTALLATION.)
3. Remove the liftgate trim. (See 09–17–16 LIFTGATE TRIM REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
1 Connector
2 Seal cap
3 Nut
4 Washer
5 Outer bushing
6 Bolt
7 Rear wiper motor
8 Washer

5. Install in the reverse order of removal. A3U0919W001

6. Adjust the rear wiper arm and blade. (See 09–19–
12 REAR WIPER ARM AND BLADE ADJUSTMENT.)
End Of Sie

09–19–12
1712-1U-01G(09-19).fm 13 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
REAR WIPER MOTOR INSPECTION
A3U091967450W02
1. Disconnect the negative battery cable.
2. Remove the liftgate trim. (Refer to 09–17–16 LIFTGATE TRIM REMOVAL/INSTALLATION.)
3. Disconnect the rear wiper motor connector.
4. Connect battery positive voltage to the rear wiper motor terminal A and the ground to a bare metal part of the
vehicle and the rear wiper motor terminal B.
5. Verify that the rear wiper motor operates.

09–19
A3U0919W101

6. Disconnect the ground to the terminal B while the

rear wiper is operating.
7. Verify that the rear wiper stops in the park
position.
• If not as specified, replace the rear wiper
motor.
End Of Sie

A3U0919W102

09–19–13
1712-1U-01G(09-19).fm 14 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
REAR WASHER MOTOR REMOVAL/INSTALLATION
A3U091976672W01
1. Disconnect the negative battery cable.
2. Partially peel off the right side mud guard.
3. Remove the washer tank. (See 09–19–7 WASHER TANK REMOVAL/INSTALLATION.)
4. Remove in the order indicated in the table.
1 Rear washer motor
2 Grommet

5. Install in the reverse order of removal.

End Of Sie

YMU919WAT

REAR WASHER MOTOR INSPECTION

A3U091976672W02
1. Remove the washer tank. (See 09–19–7 WASHER TANK REMOVAL/INSTALLATION.)
2. Connect battery positive voltage to the terminal B
and ground to the terminal A of the motor.
3. Verify that the rear washer motor operates.
• If the motor does not operate, replace the rear
washer motor.
End Of Sie

A3U0919W103

REAR WASHER NOZZLE REMOVAL/INSTALLATION

A3U091967511W01
1. Disconnect the negative battery cable.
2. Remove the rear spoiler. (See 09–16–8 REAR SPOILER REMOVAL/INSTALLATION.)
3. Remove the rear washer hose from the rear washer nozzle.
4. Compress the hooks of the rear washer nozzle.
5. Pull the rear washer nozzle out to remove it.
6. Install in the reverse order of removal.
7. Adjust the rear washer nozzle. (See 09–19–15
REAR WASHER NOZZLE ADJUSTMENT.)
End Of Sie

A3U0919W011

09–19–14
1712-1U-01G(09-19).fm 15 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
REAR WASHER NOZZLE ADJUSTMENT
A3U091967511W02
1. Insert a needle or equivalent tool into the spray
hole of the rear washer nozzle and adjust the
nozzle direction as shown.
End Of Sie

A3U0919W110

REAR WASHER NOZZLE CLEANING

A3U091967511W03
1. Clean the rear washer nozzle. (See 09–19–11 WINDSHIELD WASHER NOZZLE CLEANING.)
End Of Sie 09–19
REAR WASHER HOSE REMOVAL/INSTALLATION
A3U091967470W01
1. Disconnect the negative battery cable.
2. Remove the headliner. (See 09–17–16 HEADLINER REMOVAL/INSTALLATION.)
3. Remove the rear washer hose from the clips.
4. Partially peel off the right side mud guard and
remove the rear washer hose from the clip.

A3U0919W104

5. Remove the rear washer hose from the washer

tank.
6. Install in the reverse order of removal.
End Of Sie

A3U0919W105

09–19–15
1712-1U-01G(09-19).fm 16 ページ ２００１年６月２９日 金曜日 午前１０時３７分

WIPER/WASHER SYSTEM
INTERMITTENT REAR WIPER RELAY REMOVAL/INSTALLATION
A3U091966810W01
1. Disconnect the negative battery cable.
2. Remove the left side trunk side trim. (See 09–17–15 TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1 Nut
2 Connector
3 Intermittent rear wiper relay

4. Install in the reverse order of removal.

End Of Sie

A3U0919W111

INTERMITTENT REAR WIPER RELAY INSPECTION

A3U091966810W02
1. Measure the voltage at the intermittent rear wiper relay terminals as indicated below.
2. Disconnect the intermittent rear wiper relay connector before inspecting for continuity at the terminal H.
• If not as specified, inspect the parts listed under “Action”.
• If the parts and wiring harnesses are okay but the system still does not work properly, replace the
intermittent rear wiper relay.

Terminal Voltage Table (Reference)

A3U0919W106

Voltage (V)/
Terminal Signal Connected to Test condition Action
Continuity
A — — — — —
Ignition switch at ON position B+ • Inspect R. WIP 10 A fuse
B IG2 R. WIP 10 A fuse
Other Below 1.0 • Inspect related harness
C — — — — —
D — — — — —
Rear wiper • Inspect R. WIP 10 A fuse
switch at INT Below 1.0 • Inspect wiper and washer
position switch
Rear wiper Ignition switch at
F Rear wiper switch (See 09–19–9 WIPER
switch INT ON position Rear wiper AND WASHER SWITCH
switch at OFF B+ INSPECTION)
position • Inspect related harness
Under any condition: inspect for
H GND GND Yes • Inspect GND
continuity to ground
I — — — — —
Rear wiper is Alternates • Inspect R. WIP 10 A fuse
operating (INT below 1.0 • Inspect wiper and washer
position) and B+ switch
(See 09–19–9 WIPER
AND WASHER SWITCH
Ignition switch at
J Autostop Rear wiper motor INSPECTION)
ON position
• Inspect rear wiper motor
Other B+ (See 09–19–13 REAR
WIPER MOTOR
INSPECTION)
• Inspect related harness

End Of Sie

09–19–16