Scribd
Upload
99 views1 page

Forever Multi Trans Pro Instuctions 2022

This document provides settings and instructions for applying multi-color transfers to various hard surfaces using laser printers and a heat press. It lists recommended printer settings for white or 5-color toner, press temperatures, times, and pressures for different substrates. Substrates include wood, paper, card, aluminum, glass, leather, cork, mugs, mirrors, coasters, napkins and plastic tumblers. Tips are provided on cleaning surfaces, using a silicone pad, and removing excess particles.

Uploaded by

Emmanuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
99 views1 page

Forever Multi Trans Pro Instuctions 2022

This document provides settings and instructions for applying multi-color transfers to various hard surfaces using laser printers and a heat press. It lists recommended printer settings for white or 5-color toner, press temperatures, times, and pressures for different substrates. Substrates include wood, paper, card, aluminum, glass, leather, cork, mugs, mirrors, coasters, napkins and plastic tumblers. Tips are provided on cleaning surfaces, using a silicone pad, and removing excess particles.

Uploaded by

Emmanuel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1-PAPER-SYSTEM

MULTI-TRANS PRO
FOR HARD SURFACES

LASER PRINTER SETTINGS

WHITE TONER OKI PRO8432WT OKI PRO7411/711WT & PRO9420/920WT FOREVER TRANSFERRIP
(CMYW) • Mirror Image Mode • Mirror Image Mode • Mirror Image Mode
• Media Type: Standard Printer Settings • Media Type: Standard Printer Settings • Media Type: Ultra Heavy Paper 3
• Media Weight: Ultra Heavy Paper 3 • Media Weight: Ultra Heavy Paper 3 • Automatic Tray Detection
• Multi-Purpose Tray • Multi-Purpose Tray
• +2 Color Paper • +3 White Toner Density

5-COLOR (5C) OKI PRO9541WT FOREVER TRANSFERRIP


PRINTER • Mirror Image Mode • Mirror Image Mode
(CMYKW) • Media Type: FORVLDLT • Media Type: Ultra Heavy Paper 3
• Fill up White: max. 60% • Automatic Tray Detection
• Multi-Purpose Tray
• +3 White Density

CMYK OKI C834 (C8X4-SERIES) OTHER MODELS


• Mirror Image Mode • Transparency/Heavy Paper 3 or similar paper type.
• Media Type: UserType 8 • Contact your dealer to see if your CMYK laser printer is compatible.
• Multi-Purpose Tray

TRANSFER PROCESS
1. Pre-press your substrate/product with the recommended silicone pad and settings from the table below.
2. Place your design on your substrate/product (printed-side facing down) and if necessary,
fix it with heat-resistant tape.
3. Press your transfer with the parameters indicated below and cover it with the recommeded
silicone pad in the table below.
4. Peel the transfer paper by using the recommended settings from the table below.
ATTENTION: At this point, the substrate is very hot. Take precautions while handling it.
5. If indicated in the table below, re-press your substrate/product with the same temperature as in step 3 for about 2-5 sec.

SETTINGS

SUBSTRATES/PRODUCTS
PRE-PRESS TIME PEEL TEMP
SILICONE
TEMP + PRESSURE RE-PRESS
PAD
PRESS TIME CMYK CMYW

WOOD 135°C/275°F 20 + 30-35 sec. Medium - Warm Hot No


PAPER 135°C/275°F 2 + 5-10 sec. Medium / High - Warm Hot No
CARD 135°C/275°F 2 + 15-20 sec. Medium / High - Warm Hot No
ALUMINUM 135°C/275°F 0 + 90 sec. High Speedy Hot Hot No
GLASS 135°C/275°F 45 + 45-60 sec. High Speedy Warm Hot Yes
LEATHER 135°C/275°F 5 + 10-15 sec. Medium - Warm Hot No
CORK 135°C/275°F 30 + 35 sec. Medium / High Speedy Warm Hot Yes
MUGS 160°C/320°F 0 + 60 sec. High For Mug Press Warm Hot No
MIRRORS 135°C/275°F 45 + 45-60 sec. High Speedy Warm Hot Yes
COASTERS 135°C/275°F 2 + 15-20 sec. Medium / High - Warm Hot No
NAPKINS 135°C/275°F 2 + 5-10 sec. Medium - Warm Hot No
PLASTIC (PP) TUMBLERS 110°C/230°F 0 + 180 sec. Medium For Mug Press Warm Hot No

BOOK COVERS
(UNCOATED)
135°C/275°F 20 + 30-35 sec. Medium - Warm Hot No

TIPS & TRICKS


• Remove any dust, coatings, chemicals and greases from substrate/product-surfaces, prior to the transfer.
Metal and glass surfaces can be cleaned with alcohol.
• Using the Silicone Pad helps distribute the heat evenly across the transfer.
ATTENTION: The pressing parameters can vary when using a silicone pad.
• If you excess particles have been transferred, you can easily remove them by rubbing it with a cloth.

Southern Office: 400-450 Nest Business Park, Martin Road, Havant, Hampshire, PO9 5TL
Midlands Office: Unit 4A-C East Bridgford Business Park, Kneeton Road, East Bridgford, Nottingham, NG13 8PJ

You might also like