Digital Power Meter

www.itmikro.com

DPM 380
Features

MEASUREMENT PARAMETERS:
• Phase Voltage (L-N) & Line Voltage (L-L)
• Min & Max Phase and Line Voltage
• Phase Current and Neutral Current
• Min & Max Phase Current and Neutral Current

• kVA (per phase & total)

• Min & Max kW, kVAR and KVA
• Frequency
• True & Displacement Power Factor (per phase &
total)
• Energy kWh, kVARh and kVAh
• THD Phase Voltage ( L-N )
• THD Phase Current
• Power Demand (kW, kVAR & kVA)
• Maximum Power Demand (kW, kVAR & kVA)

Technical Data
DISPLAY TYPE POWER DEMAND ENVIRONMENTAL CONDITIONS
LCD display Interval : 1 ~ 30 mins Temperature : -10°C to 55°C
Humidity : 5% to 95%,
MEASUREMENTS POWER FACTOR MEASUREMENT non-condensing
3-phase 4-wire system Total and displacement
3-phase 3-wire system power factor accuracy : 1% MECHANICAL
:P
FREQUENCY MEASUREMENT Dimension (mm) : 96(w) x 96(h) x 105(d)
CT primary : 5 ~ 9995 A Measurement range : 45~65Hz Approximate weight : 0.48kg
CT secondary :5 A : 1s : IP54 at the panel
Minimum measurement : 5 mA IP20 at the body
Accuracy : 0.5% from 1A to Accuracy : 0.5%
6 A (secondary)
Burden : < 0.05 VA at 5 A ENERGY ACCURACY
Sustained overload :6 A : class 1
: class 2

Nominal phase voltage : 20 ~ 300 V AC AUXILIARY POWER SUPPLY

Minimum measurement :10 V AC voltage : 90 ~ 415 V AC
DPM 380

Accuracy : 0.5% at full scale Frequency : 50 / 60 Hz

Phase voltage via VT : 60 ~ 33,000 V DC voltage : 100 ~ 300 V DC
: <3 VA
POWER MEASUREMENT
COMMUNICATION
power Hardware interface : Isolated RS485
measurement Protocol : Modbus-RTU
:1s Baud rate : 2400, 4800, 9600,
19200, 38400
Accuracy : 1.0%
Digital Power Meter
www.itmikro.com

Typical Application Diagram Case Dimensions

3-PHASE 4-WIRE SYSTEM:4CTs, direct V input. 3-PHASE 4-WIRE SYSTEM:3CTs, direct V input.

19 19
20 20
1 1
2 2 Front
3 3
4 4
5 5
6 6
7 7
8 8
13
15 15 14
13
16 12
14 16

17 12
17
18 18

Rear
3-PHASE 3-WIRE SYSTEM:3CTs, 3VTs 3-PHASE 3-WIRE SYSTEM:2CTs, 3VTs

19 19
20 20
1 1
2 2
3 87.
3
4 4
5 5
6 6
7 7
8 8
13 13
15 15
14 14 1 2 3 4 5 6 7 8
16 12 12
16
17 17
18 18
9 10 11 12 13 14 Back
15 16 17 18 19 20

Cut-Out Recommendations

Electromagnetic Compatibility (EMC)

Part 6-2: Generic Standards IEC61000-6-2
Immunity for industrial environments.

Part 6-4: Generic Standards IEC61000-6-4

DPM 380

Emission standard for industrial environments.

Ordering Information
MODEL DESCRIPTION
DPM 380-415AD Auxiliary Voltage 90 ~ 415 V AC or 100 ~ 300 V DC