Scribd
Upload
6 views

Arduino

This Arduino sketch implements a password-protected system using a keypad and LCD display. It takes password input from the keypad one character at a time, displays it on the LCD, and compares the input to a stored master password. If the password matches, it activates a motor and turns off a buzzer. If it does not match, it activates the buzzer and deactivates the motor.

Uploaded by

vieux ndao
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
6 views

Arduino

This Arduino sketch implements a password-protected system using a keypad and LCD display. It takes password input from the keypad one character at a time, displays it on the LCD, and compares the input to a stored master password. If the password matches, it activates a motor and turns off a buzzer. If it does not match, it activates the buzzer and deactivates the motor.

Uploaded by

vieux ndao
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

#include <LiquidCrystal.

h> // Include LiquidCrystal library


#include <Keypad.h> // Include Keypad library
LiquidCrystal movie(A5,A4,A3,A2,A1,A0);
#define Password_Length 8 // Length of password + 1 for null character
char Data[Password_Length]; // Character to hold password input
char Master[Password_Length] = "12A34B5"; // Password
char customKey; // Character to hold key input
int electric_motor = 10; // Pin connected to Electric Motor
int buzzer = 11; // Pin connected to Buzzer
int indicator_led = 12; // Pin connected to Green Indicator LED
int k ;
int i = 0;
int s = 0;
int g = 0;
int a = 0;
int wait = 300; // Delay time for LED
byte data_count = 0; // Counter for character entries
const byte ROWS = 4; // Constants for row sizes
const byte COLS = 4; // Constants for column sizes

char hexaKeys[ROWS][COLS] = { // Array to represent keys on keypad


{'1', '2', '3', 'A'},
{'4', '5', '6', 'B'},
{'7', '8', '9', 'C'},
{'*', '0', '#', 'D'}
};

byte rowPins[ROWS] = {9, 8, 7, 6}; // Connections to Arduino


byte colPins[COLS] = {5, 4, 3, 2};
Keypad customKeypad = Keypad(makeKeymap(hexaKeys), rowPins, colPins, ROWS,
COLS); // Create keypad object

void setup() {

pinMode(electric_motor, OUTPUT); // Set Electric Motor pin as an OUTPUT pin


pinMode(buzzer, OUTPUT); // Set Buzzer pin as an OUTPUT pin
pinMode(indicator_led, OUTPUT); // Set Green Indicator LED pin as an OUTPUT pin
Serial.begin(9600); // Initialize serial communications at 9600 baud rate
movie.begin(16,2); // Initialize LiquidCrystal display
Serial.print("Enter Password:");
movie.print("Enter Password:");
delay(1500);
movie.clear();

}
void loop() {

for(k=0;k<7 && g<1;k++) // "For loop" for taking Input


{
movie.setCursor(0,0);
movie.print("Enter Password:");
delay(100);

customKey = customKeypad.getKey(); // Look for keypress


if (customKey) { // Enter keypress into array and increment
counter
Data[data_count] = customKey;
Serial.print(Data[data_count]);
movie.setCursor(s,1); // LCD Command for changing the column of second
row
movie.print(Data[data_count]);

digitalWrite(indicator_led,HIGH); // Blink the green indicator LED with every


successful input
delay(wait);
digitalWrite(indicator_led,LOW);
delay(wait);

data_count++;
s++;
}
}

if (data_count == Password_Length - 1) { // See if we have reached the password


length
while(i<1)
{
Serial.println(""); // For sending the serial monitor's
cursor in next line
movie.print("");
i++;
}

if (!strcmp(Data, Master)) { // Password is correct

digitalWrite(electric_motor, HIGH);
digitalWrite(buzzer, LOW);
Serial.println("correct");
movie.clear();
movie.setCursor(0,0);
movie.print("The password is");
movie.setCursor(0,1);
movie.print("correct");
delay(1000);
movie.clear();
g=1;
}
else {

digitalWrite(electric_motor, LOW); // Password is incorrect


digitalWrite(buzzer,HIGH);
Serial.println("incorrect");
movie.clear();
movie.setCursor(0,0);
movie.print("The password is");
movie.setCursor(0,1);
movie.print("incorrect");
delay(1000);
movie.clear();
g=1;
}
}
a=1;
}
void clearData() {
while (data_count != 0) { // Go through array and clear data
Data[data_count--] = 0;
}
return;
}
https://boutiquepro.orange.fr/

You might also like