Scribd
Upload
296 views2 pages

Information: G 6200 B 190 N 4 SP

This document provides a key for rapier weaving machines. It breaks down the code "G 6200 B 190 N 4 SP" which specifies a rapier weaving machine that uses cotton yarn, has a weaving width of 190 cm, is a low-built machine, can use 4 weft colors, and uses a positive dobby shedding motion with 16 or 24 heald shafts. The document also explains the different codes that can be used to specify the weaving method, yarn type, machine width, construction, number of weft colors, and shedding motion.

Uploaded by

muhammedasif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
296 views2 pages

Information: G 6200 B 190 N 4 SP

This document provides a key for rapier weaving machines. It breaks down the code "G 6200 B 190 N 4 SP" which specifies a rapier weaving machine that uses cotton yarn, has a weaving width of 190 cm, is a low-built machine, can use 4 weft colors, and uses a positive dobby shedding motion with 16 or 24 heald shafts. The document also explains the different codes that can be used to specify the weaving method, yarn type, machine width, construction, number of weft colors, and shedding motion.

Uploaded by

muhammedasif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Information

Type key for


rapier weaving machines
G 6200

G 6200 B 190 N 4 SP
Weaving method

Type series

Yarn

B = Cotton
W = Wool
S = Synthetics (filament yarns)
V = Glass fibre

Machine width (cm) = nominal weaving width (cm)

140
170
190
200
220
240
260
280

Machine construction

N = low-built WM
F = terry WM

Weft colours

2 Two-weft
4 Four-weft
6 Six-weft
8 Eight-weft

Shedding motion

SP Positive dobby (16 or 24 heald shafts)


J Jacquard machine
EP Positive tappet motion (10 heald shafts)

i 06.1

G 6200 e 17.07.2000 Page 1

You might also like