Product Specification

03225 (Rev. G)

L-Series
Integrated Engine
Speed Control
• Low cost engine
control
• Fully integrated
actuator and
speed control
• Small package–
greater design
DESCRIPTION flexibility
The Woodward L-Series Integrated configured for clockwise or counter- • Suitable for
Engine Control System is the first engine clockwise (standard) shaft rotation for gasoline,
speed control to deliver so much in a increasing fuel. gaseous, and
package this compact.
To learn more about the new L-Series diesel fueled
It can also deliver a big savings in integrated engine control, contact engines
production and field support. Since the Woodward today.
L-Series Control System is
L-Series control features:
• Microprocessor-
microprocessor-based, it can easily be based
programmed to match the operating • operates fuel or air control with 0.34
parameters of every engine you produce. Nxm (0.25 lb-ft) torque (60° travel • Tamper-resistant
The L-Series offers speed control with range)
software-selectable speed setpoints, • state-of-the-art speed sensing and • Easy setup and
dynamics, fuel limiting, and start/stop control algorithms tuning using
behavior. All it takes is a PC and a simple, • comprehensive diagnostics for easy PC-based Service
plug-in download on your production line. troubleshooting
• end-of-line programmability simplifies
Tool
With many built-in functions, this inventory • Discrete output
microprocessor-based speed control • optional transient smoke limiter for
allows a high-volume OEM or packager to driver for fault
turbocharged diesel engines
stock one part number, but implement a • customer configurable auxiliary inputs
indication
wide variety of engine control strategies
by configuring the four auxiliary inputs at
available on board to match your • Voltage output for
specific application throttle position
their factory. • optional mounting kits for Stanadyne
Besides the traditional bracket mount DB-series or Delphi DP200 & DP210 indication
using external linkage, the L-Series fuel injection pumps provides • Configurable I/O
Control System is available in a variety of integrated control solution
mechanical configurations, including one • speed setpoint adjustment using
integrated into a rotary diesel fuel pump Idle/Rated1/Rated2, Raise/Lower, and
and one integrated with a throttle body external analog settings
(product spec 03223) or a throttle body • dual sets of speed dynamics can be set
and mixer (product spec 03222). The by engine speed, discrete input, or
externally mounted systems can be even an external signal
 Flexible design. More intelligent engine control. Streamlines production process.
PO Box 1519 Specifications
Fort Collins CO, USA Power Supply 12/24 volt system, 10 to 32 Vdc
80522-1519 Power Consumption Reverse polarity protection, 32 W max
1000 East Drake Road
Torque 0.34 Nxm (0.25 lb-ft)
Fort Collins CO 80525
Tel.: +1 (970) 482-5811 Dimensions (WxHxL) 75.7 x 88.4 x 111.3 mm (2.98 x 3.48 x 4.38 in.)
Fax: +1 (970) 498-3058 Weight 425 g (15 oz)
Connector 12-pin Deutsch connector (DT06-12SA-P012)

Distributors & Service Control Characteristics

Woodward has an Speed Input and Range Magnetic pickup or ignition coil
international network of MPU input: 1–12 000 Hz, 1–720 teeth, 1 Vrms min.
distributors and service IGN input: 1–480 Hz, 1–20 cylinders with rated speed up to 4000 rpm
facilities. For your nearest Target speed: programmable
representative, call the
Fort Collins plant or see
Speed range: programmable
the Worldwide Directory Actuator Torque High-efficiency torque motor; delivers 0.34 Nxm (0.25 lb-ft)
on our website. (60° travel range) to operate fuel or air control
Steady State Speed
Regulation Fuel Type Gasoline Diesel Gaseous
www.woodward.com MPU input ±0.35% ±0.25% ±0.35%
Ignition input ±0.50% n/a ±0.50%

Functions/Auxiliary Inputs
Function Options Isochronous Speed (50 or 60 Hz); Two or Three Speed; Droop; Start
Fuel Limiter; Load Sharing; Dual Dynamics; Adjustable Max Fuel Stop;
Manifold Air Pressure Biased Fuel Limiter; Cold Start Timer
Programming Port Programmable with Windows GUI software (9927-1222) and harness
(8923-1061)
I/O 0–5 V throttle position indication
Discrete out for fault indication
4 aux inputs, configurable functions

Environment
Operating Temperature –40 to +105 °C (–40 to +221 °F)
Storage Temperature –40 to +125 °C (–40 to +257 °F)
EMC EN61000-6-2: Immunity for Industrial Environments
EN61000-6-4: Emissions for Industrial Environments
SAE J1113-21: Radiated Immunity (100 V/m)
SAE J1113-11: Conducted Transient Immunity – Pulse 5b, Suppressed
Load Dump (45 V)
Humidity US MIL-STD 810E, Method 507.3, Procedure III
Shock MS1-40G 11ms sawtooth
Vibration Random: 0.3 G²/Hz, 10–2000 Hz (22.1 Grms) 3 h/axis
Sine: 5 G 2.5 mm peak-to-peak, 5–2000 Hz, 3 h/axis, 90 min dwells,
1 octave/min
Thermal Shock SAE J1455, Paragraph 4.1.3.2
Fluid Resistance IP56 per EN60529

Compliance
CE Compliant with EMC Directive 89/336/EEC
Other Compliant as a component with Machinery Directive 98/37/EC
CSA Class I, Division 2, Groups A, B, C, D T3C
These listings are limited only to those units bearing the CSA agency
identification.
Technical Manual 26250

This document is distributed

for informational purposes
only. It is not to be construed For more information contact:
as creating or becoming part
of any Woodward Governor
Company contractual or
warranty obligation unless
expressly stated in a written
sales contract.

© Woodward 2000
All Rights Reserved

2007/1/Fort Collins