PULSE4000 TM

HI-FI BLUETOOTH SPEAKER

WITH POWER CHARGER

PLEASE READ BEFORE OPERATING

HALO PULSE 4000
Thank you for choosing HALO. Innovative, fashionable and easy to use,
the HALO PULSE 4000 provides a powerful sound bigger than its size.
The HALO PULSE 4000 was designed to bring people together for a
one of a kind shared listening experience.

Please read the operating instructions carefully before using the

HALO PULSE 4000.
CONTENTS
Package Contents
Operating Instructions
Maintenance and Care
Safety Precautions
Specifications
Troubleshooting Guide
Compliance with FCC Regulations
Warranty and Contact Information
PACKAGE CONTENTS
- HALO PULSE 4000
- Standard USB to Micro USB Cable
- AUX Audio Cable
- Operating Instructions

7 8 11

1 9

3 4 5 6

10 2

LOCATION OF CONTROLS
1 | Power/ LED Switch 6 | 5V/1.5A USB Output Port
2 | Play/Pause 7 | Line-in (Aux in) Connection Jack
3 | Prev/Volume Down 8 | Mic
4 | Next/Volume Up 9 | Micro USB Charge Port
5 | LED Mode 10 | Mode (Audio Input Mode Selection)
11 | Charging Indicator
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO PULSE 4000 prior to first
use.

CHARGING THE HALO PULSE 4000

The HALO PULSE 4000 operates on a rechargeable, Li-ion battery. First,
use the Standard USB to Micro USB Cable (included) and connect the
Micro USB tip into the Micro USB port on the HALO PULSE 4000. Next,
connect the Standard USB end into your computer’s USB port or a USB
adapter (not included).

While charging, the LED Indicator will illuminate red. When battery is
fully charged, the LED Indicator will illuminate green. Disconnect the
Standard USB to Micro USB Cable.

Note: The Micro USB Charging Port located on this unit is only used
for charging the internal battery of the HALO PULSE 4000.

TURNING THE HALO PULSE 4000 ON/OFF

Slide ON/OFF switch to LED position to use the HALO PULSE 4000 as a
bedside light. Slide the ON/OFF switch to the ON position to use the
HALO PULSE 4000 as a speaker.

Note:
Once the unit is powered on, the Bluetooth Pairing Mode Indicator
will flash to indicate that the unit is discoverable and ready to pair or
reconnect with a device.
HOW TO PAIR BLUETOOTH
1. Slide ON/OFF button to ON position, the speaker will go into
Bluetooth Pairing Mode automatically and blue LED will blink
continuously to show it is ready to pair.

2. Enable the Bluetooth function on your mobile device and search for
the Bluetooh speaker.

3. Select device named HALO PULSE 4000 that has been newly added
to pair, the device will emit an audio tone and the LED
light will flash briefly and become solid when paired successfully.
You can now use the HALO PULSE 4000 speaker.

Note:
Only one playback unit can be connected to the HALO PULSE 4000.
If the HALO PULSE 4000 is already connected to another playback
unit, the HALO PULSE 4000 will not appear in the Bluetooth
selection list. The HALO PULSE 4000 must be unpaired before it
can become discoverable by another Bluetooth enabled device.

After turning on the HALO PULSE 4000, it will automatically

search for the last paired device. The Bluetooth Pairing Mode
Indicator will flash. If the HALO PULSE 4000 finds the paired
Bluetooth device, an audible sound is heard and Bluetooth Pairing
Mode Indicator will stop flashing.
CONTROL BUTTONS AND PLAYBACK
PLAY/PAUSE (No. 2)
Short press the Play/Pause button to play music/audio on the HALO
PULSE 4000. When receiving an incoming call, you can use this button
to accept/reject.

PREVIOUS/VOLUME DOWN (No. 3)

Short press the Previous/Volume Down button to play previous of
next song.
Long press the Previous/Volume Down button to decrease the
volume.

NEXT/VOLUME UP (No. 4)
Short press the Next/Volume Up button to play previous of next song.
Long press the Next/Volume Up button to increase the volume.

MODE (No. 11)

Press Mode button to toggle audio source between Bluetooth/AUX.

LED MODE (No. 5)

Press LED Mode button to change the LED Color Display.

CHARGING ELECTRONIC DEVICES

The standard USB ports charge external devices, such as smart
phones, tablets and other USB powered devices.
1. Plug the USB power cable of your device into the USB port on
the HALO PULSE 4000.
2. Plug the other end of the USB cable into your electronic device,
and charging will commence.
Note:
You can continue to listen the HALO PULSE 4000 while charging.
AUXILIARY INPUT
If you are using an iPod, MP3/MP4 player or other mobile phone
which can not connect to the HALO PULSE 4000 via Bluetooth
directly, you can still play it on the HALO PULSE 4000 via an audio
connecting cable.

1. Plug one end of the 3.5mm audio cable (included) into the
headphone or line out jack on your player, plug the other end
of cable into the HALO PULSE 4000 AUX-IN Jack.
2. Turn on the external audio source and play your device.
3. The volume level can be controlled through the HALO PULSE 4000.
Use all other functions on the external device.

MAINTENANCE AND CARE

After prolonged use, the internal battery will become weak and the
operation may become intermittent. Once the battery is fully
discharged, immediately recharge (regardless of whether you plan to
use this unit or not) in order to maximize battery life. If you plan not to
use the battery for an extended period of time, one week or longer, we
recommend that you fully charge the battery. For longer periods of
storage, please recharge the battery at least every two months to
maintain the battery in optimum condition.

To clean the exterior surface, you can wipe it using a dry, soft cloth. Do
not use chemicals, solvents or sprays. Keep objects and liquids away
from any openings/vents of the HALO PULSE 4000.

SAFETY PRECAUTIONS
This HALO PULSE 4000 has been designed and manufactured to
ensure your personal safety when used in the directed manner.
Improper use can result in potential hazard.
Please read all safety and operating instructions carefully before
installation and use. Keep these instructions handy for future
reference.
- Warning: The product has a strobe light effect when played in certain
modes which has the ability to cause headaches and possible seizures.
- The HALO PULSE 4000 should not be used near water or wet areas
such as bathtubs, showers, bathrooms, sinks, swimming pools or
basements.
- To reduce the risk of fire or electric shock, do not expose the HALO
PULSE 4000 to rain or moisture. Keep the HALO PULSE 4000 away from
dripping, splashing, or any objects filled with liquids. Do not place
anything on HALO PULSE 4000.
- Keep away from heat sources, including but not limited to: open
flame sources, radiators, stoves, ovens, cars, and amplifiers that
produce heat.
- Do not expose HALO PULSE 4000 or batteries to fire or sunshine.
- Do not puncture, crush or subject to mechanical shock.
- Do not disassemble .
- Unplug the charger when batteries are fully charged or not in use.
- Li-ion batteries must be recycled. Do not dispose of in the trash.

SPECIFICATIONS
Battery Capacity: 4000mAh
Micro USB Input Charging: DC 5V, 2A
Battery Charging Time: 2-3 Hours (varies by charging current)
Max Play Time: 6 Hours (varies by volume level and audio content)
USB Output: DC 5V, 1.5A
Bluetooth Transmitter Frequency Range: 2.402-2.480GHz
Bluetooth Transmission Range: approx. 32 meters
Dimensions (W x D x H): 183 x 84 x 84mm
Weight: 603g
TROUBLESHOOTING GUIDE

Fault Cause Solution

The power adapter (not included) is not Plug the power adapter (not
plugged into a wall outlet or the USB included) into a wall outlet and plug
cable is not plugged into the micro USB the USB cable into the micro USB
port on the speaker port on the speaker

Internal battery Plug another device into the same

not charging Wall outlet is not functioning. outlet to confirm the outlet is
functioning correctly.

Make sure your computer power is

Computer USB port is not functioning. turned on and try another USB port.

The battery is too low. Recharge the battery.

The speaker is not linked with the cell Go through “Bluetooth Operation”
No sound phone. process to link the speaker.

Volume set too low. Increase the volume of your device.

Check whether a connection exists.

No audio signal via Speaker is not paired to the audio If necessary, pair the speaker again
source. to the audio source.
Bluetooth connection
Increase the volume on speaker/
Volume is too low.
audio source.

Audio source is switched off Switch on audio source

Speaker cannot be
Bluetooth is switched off at the audio Switch on Bluetooth function
connected source. in the audio source.

Bluetooth version is not supported. Use a different external device.

Poor sound quality

Bluetooth device is almost out of range Move your Bluetooth device closer
from Bluetooth® of speaker to speaker
device
COMPLIANCE WITH FCC REGULATIONS
“Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.”
“NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
LIMITED WARRANTY
HALO INTERNATIONAL SEZC LTD warrants its products to be free from
defects in material and workmanship under normal use. Conditions
are as follows:
- During the first 90 days from date of purchase, HALO INTERNATIONAL
SEZC LTD will repair or replace the defective product.
- HALO INTERNATIONAL SEZC LTD will, subject to inspection, repair the
defective product or replace it with a new or reconditioned unit. The
return must be accompanied by a Return Merchandise Authorization
(RMA) number to be issued upon request, and must be shipped
prepaid. We do not offer shipping rebates at this time. If this is
something you would like to add please give me a call to discuss.
- Warranty is void if the product has been improperly handled or
misused in any way, or if the label and/or bar-coded warranty label has
been removed or tampered with.
- Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
- The warranty does not extend to the electronic equipment that is
used or which incorporates with any of our products and accessories.
HALO INTERNATIONAL SEZC LTD shall not be held responsible for the
improper use of its products.
- For all questions or exchange requests, please call 888-907-6274, or
email us at [email protected].
 FOR TECHNICAL SUPPORT PLEASE
EMAIL US AT:

[email protected]
OR
CALL US AT: 888-907-6274

HALO INTERNATIONAL SEZC LTD

68 WEST BAY ROAD
GEORGETOWN, GRAND CAYMAN, KY1-1003

WWW.BESTHALO.COM