UNIT 2 MCQ-AWSN Obj
UNIT 2 MCQ-AWSN Obj
a.Actuators
b.Sensors
c.Motors
d.Microcontrollers
a.Power Consumption
b.Node mobility
c.Failure of nodes
a.Tracking
b.Periodic measurements
a.Power consumption
6.A transceiver that is ready to receive but is not currently receiving is called ________ state.
a.Transmit
b.Receive
c.Idle
d.Sleep
7.When the distance between source and sink is large ______ technique is used.
a.Single hop
b.Multi hop
c.Both A and B
8.The approach which changes the modulation scheme according to current situation is called
________
b.Time to partition
a.Temparature gradients
b.Vibrations
c.Photovoltaics
d.Battery
11.The device that contains both transmitter and receiver together is called
a.Sensor
b.Transducer
c.Diode
d.Transceiver
a.Collect data
b.Process data
c.Receive data
A.ROM
b.PROM
c.EEPROM
d.Flash Memory
a.Memory
b.Power supply
c.Communication device
15.A ________ is formed by grouping a number of sensor nodes together to play roles like
sensing, monitoring etc.,
a.Wireless Mesh Network
b.Wired Network
a.Seismic
b.Thermal
c.Visual
a.Bandwidth
b.Energy
c.Quality of service
d.Storage
18.The term which defines that the network has to maintain itself is
a.Adaptability
b.Flexibility
c.Maintainability
d.Mobility
19.The nodes that determine their geographical positions using other nodes of network is called
a.Self reconfiguration
b.Self programmable
c.Self location