ELLIS NO BOLTS CLEAT

Non-Metallic Short Circuit Tested Cable Cleat

Patent Pending

NON-METALLIC RAPID
INSTALLATION CABLE CLEAT

Ellis No Bolts Cleat is a fully polymeric cable

cleat designed for fast installation. The cleat
is manufactured from a high strength nylon
specifically formulated to meet the London
Underground 1-085 specification.

Due to its non-metallic design the cleat is

impervious to ‘bi-metallic corrosion’ and suitable
for use in the harshest of environments.

Stackable design for multiple cable runs.

No risk of damaging cable.
Range suits Ø18 - Ø55mm single cables.
Fast installation.

Part No. Cable Ø Range mm

NBC18-22 18 -22
NBC20-26 20 - 26
NBC24-30 24 - 30
NBC28-34 28 - 34
NBC32-39 32 - 39
NBC37-47 37 - 47
NBC45-55* 45- 55

For the twist fit foot feature add a ‘TF’ suffix

e.g. NBC 18-22TF.

* This size is not supplied with insert mouldings.

Note: Part No’s are preliminary and could be subject to change.

Orientation Peak Phase Spacing Cleat Spacing IEC61914

Stacked 71.7 kA 75mm 300mm Cat. 2 pass

Horizontal 101 kA 110mm 300mm Cat. 2 pass
www.ellispatents.co.uk
ELLIS NO BOLTS CLEAT
PUSH FIT LOCKING MECHANISM ON THE KEEPERS AND THE TOP CLAMP THE CLEAT CAN BE SUPPLIED WITH AN M8 THROUGH HOLE FIXING
PROVIDE FAST INSTALLATION. OPTION OR CHANNEL TWIST FIT FEATURE.

THE CLEATS CAN BE STACKED ON A QUARTER TURN FEAUTURE DESIGNED TO ACCOMMODATE 18-55MM SINGLE CABLE RANGE TAKE.
PROVIDED BY CHANNEL TWIST FIT VERSIONS.

Channel twist M8 through Insert version

fit version hole version (Covering OD’s <Ø45mm)
DIMENSIONS

90
85

A A

109 typ.

5
91 typ.

Ø5
5- Ø45
Ø4

Recess for quarter

turn stacking

Ø8.5
Channel
A-A
twist feature

Ellis Patents Ltd T. +44 (0)1944 758395

High Street, Rillington, Malton F. +44 (0)1944 758808
North Yorkshire YO17 8LA [email protected]
United Kingdom www.ellispatents.co.uk