0% found this document useful (0 votes)
26 views3 pages

Forklift Checklist

The document is a lifting machinery inspection report for a forklift. It lists the client and inspector details, describes the forklift, and provides a checklist of over 40 inspection points. It notes that the forklift passed its load test and lists the time and date of completion as 12:00 on 8 July 2008. The inspector signs off that all listed work was performed according to relevant acts and standards.

Uploaded by

Rodney Mario
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
26 views3 pages

Forklift Checklist

The document is a lifting machinery inspection report for a forklift. It lists the client and inspector details, describes the forklift, and provides a checklist of over 40 inspection points. It notes that the forklift passed its load test and lists the time and date of completion as 12:00 on 8 July 2008. The inspector signs off that all listed work was performed according to relevant acts and standards.

Uploaded by

Rodney Mario
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

PREDA LIFTING & INSPECTION SERVICES

Client name:……………………………… LMI’sandidate name R.SPRINGBOK or L.C.BAKER: …………………………………………

LMI’s Name (print) P. DELANGE or R.G. VON ZWEIGBERGK:……………………………

Address:…………………………………… Registration number:…………………………

Description of Lifting Machinery :……………….. S.N./Id number of item:………………………….


Date of last Inspection: …………………………….

Expiry date for LOAD TESTING: …………………….

Check list: Checked Remarks


Machine No. & SWL notification on machine
Bolts Nuts Crakes etc.
Work area around machine No obstacles, Clean, grass
etc.
Examine lockout systems & Bottom DB boards.
Examine uprights for: paint work, rust, damage etc.
Examined all bearings, rollers, chains.
Examine all hydraulic cylinders, pins, lock plates, etc.
Examine controls
Examine engine and gearbox and check no oil leaks
Examine all electrical cables for isolation, secure.
Examine checked all electrical lights work, safety and
head lights etc.
Examine catwalks and hand railings for damages,
deformation, paintwork, etc.
Examine End carriages for cracks & damages
Examine examine and test all forklift brakes as per
spec. etc.
Examine all forks,
hooks, bullnose, and attachments
Examine check all load cell or static weight calibration
certificates are still valid.
PREDA LIFTING & INSPECTION SERVICES

Examine drive shaft bearings, couplings drive gears


(lubrication) covers, bolts secured or missing etc.
Check load limiting devices: for electrical connections
screws missing, secure calibration certificates, etc.
The calibrated load tested weights tested through all
motions, calibrated load limiter, and reset and sealed.
Signed off all work performed on the log sheet no 9
The test performed in terms of the O.E.M. THE ACT
85 OF 1993, AND THE CODE OF PRACTICE 29.

THIS FORKLIFT HAS PASSED THE LOAD TEST YES JUST STEAMCLEAN BEFORE PLACE BACK IN SERVICE

Time on completions 12H00 Time: 12H00


Date: 8/07/2008 Date: 08/07/2008
PREDA LIFTING & INSPECTION SERVICES

Client signature: LMI Signature:

You might also like