Remote escape release

for NG and NS series safety switches

 Remote escape release for NG and NS series safety switches

General data
The remote escape release is operated via a flexible cable and facilitates remote unlocking of the safety
switch in cases where conventional release devices (lock-type, by screwdriver, push button, etc.) are not
easily accessible due to the configuration of the machinery.
The remote escape release is particularly suitable in situations where the switch must be installed in a
difficult-to-reach position, for example on top of a guard or inside a shield in order to prevent tampering.
The remote escape release can be used with NG and NS series RFID safety switches with guard locks.

Self-monitoring of cable tension

Unlike other similar solutions on the market, the Pizzato
Elettrica remote escape release is equipped with an
innovative mechanical control system which safely stops
the machinery, if the cable is cut or loosened.
When the device is activated, the square control indica-
tor is positioned at the symbol; in the event of a fault
or anomaly, the square control indicator is positioned at
the symbol facilitating a quick diagnosis by the user.
Release activated Release not activated Cable cut or loosened

Orientable device

The remote escape release device can always be

oriented to one of the four sides of the switch
by simply unscrewing the four fixing screws of
the switch head. This feature of the NG and NS
switches facilitates a unique degree of flexibility in
the installation of this type of device.

The remote escape release device can also

be ordered with four different cable exit
orientations in order to choose the most sui-
table orientation for the application on the
machine.
Standard devices are configured with the
cable exit direction oriented downwards.

1 Remote escape release

 Flexible installation
The NG and NS safety switches with remote escape release are supplied with the respective device con-
nected to the switch head and with a heavy-duty, five-metre-long steel cable which runs inside a sheath
with a steel core.
The user can cut the cable and sheath to the required length in order to optimise the adaptation of the
installation to the operational requirements.
The remote release push button, with code VN RR-K4, which must be ordered separately and to which the
free end of the cable must be connected, is necessary for the completion of the assembly.
The push button has a sturdy internal metallic structure which is complemented by a small plastic hou-
sing, which creates a compact, aesthetically pleasing solution.
The housing can also be combined with a label displaying the VE TF ••H•••• series marking to better
indicate the function of the button.

Activation button for remote escape release

Article Description

VN RR-K4 Activation button for remote escape release on NG and NS series switches
Mushroom push button for activating the remote escape release by means of a metallic cable, complete with plastic
cover, with the option of affixing laser-marked labels from the Pizzato Elettrica Eround series.
Compact device with rugged internal metallic structure, ideal for flush installation on aluminium profiles starting from
30 mm.
Double mounting mode:
- fixed with screws to the outside of the guard chassis, closed by applying the cap (Figure A);
- fixed inside the guard chassis by means of the ring supplied, on a panel with a standard Ø 22 mm hole, leaving only
the mushroom push button visible (Figure B).

Note: the actuation cable is integrated in the remote release device connected to the safety switch.

38
65,6

30 42,2 47,5

A. Installation outside the chassis B. Installation inside the chassis,

on a perforated panel

Complete kit for installation on NS series switches

Article Description

VN RR-K1 Complete kit with connection block, cable and push button for mounting on NS series switches

The user can install the remote escape release directly into NS series
safety devices that are already equipped with a front or rear release device
(items฀฀NS฀••ST••••฀,NS฀••SE••••,฀NS฀••CE••••,฀and฀NS฀••CT••••)฀by฀
means of the disassembly procedure for the upper switch block.

Attention: The installation of the VN RR-K1 accessory on series NS devi-

ces with an energised electromagnet operating principle is prohibited
(items฀NS฀E•••••••,฀NS฀H•••••••,฀NS฀M•••••••).

All values in the drawings are in mm  The 2D and 3D files are available at www.pizzato.com

Remote escape release 2

 Remote escape release for NG and NS series safety switches

Selection table for NG switches with remote escape release

Locked actuator with de-energised Locked actuator with de-energised

solenoid. solenoid.
Operating principle With sealable auxiliary release device. With sealable auxiliary release device.
With actuator.

Mode 1 NG 2D9D411A-F31 NG 2D9D411A

Mode 2 NG 2D9D421A-F31 NG 2D9D421A

Mode 3 NG 2D9D431A-F31 NG 2D9D431A

Note: The codes above include the safety switch supplied with the remote release cable which has a standard length of 5 metres.
For other lengths, please contact our Technical Department.

The remote escape release switch must be supplemented with the push button with the code VN RR-K4.

Selection table for NS switch with remote escape release

Locked actuator with de-energised Locked actuator with de-energised Locked actuator with de-energised Locked actuator with de-energised
solenoid. solenoid. solenoid. solenoid.
Operating principle With auxiliary key release. With screwdriver release. With auxiliary key release. With screwdriver release.
With actuator. With actuator.

Mode 1 NS D4SR1SMK-F41 NS D4CR1SMK-F41 NS D4SR1SMK NS D4CR1SMK

Mode 2 NS G4SR1SMK-F41 NS G4CR1SMK-F41 NS G4SR1SMK NS G4CR1SMK

Mode 3 NS L4SR1SMK-F41 NS L4CR1SMK-F41 NS L4SR1SMK NS L4CR1SMK

Note: The codes above include the safety switch supplied with the remote release cable which has a standard length of 5 metres.
For other lengths, please contact our Technical Department.

The remote escape release switch must be supplemented with the push button with the code VN RR-K4.

 The 2D and 3D files are available at www.pizzato.com

3 Remote escape release

 Dimensional drawings
NG NS
Switch NG 2D9D••1A Switch NS ••SR•SMK Switch NS ••CR•SMK, NS ••TR•SMK

37 40 42.6 37 40
40 37 40 40 40 28 9
28 9
28 9
22.8

9.2
38.2
38.2

40
40
20.6

19
83,9

15
24
24

15
40

38,8
15

5,
4
Ø11,2 Ø11,2

191.2
233,5

191.2

128
128
Ø 11,2
144

5 2 5.3 5 2 5.3

10.8
10.8

25
25
24,1

30 18,3
5,6

40,4 2,4 49

Accessories

Adhesive labels for escape release button

Polycarbonate yellow adhesive, rectangular, 300 x 32 mm, red
inscription.
It has to be fixed on the internal part of the jamb and helps finding the
escape release button.
Article Description
VF AP-A1AGR01 PREMERE PER USCIRE ita
VF AP-A1AGR02 PUSH฀TO฀EXIT eng
VF AP-A1AGR04 ZUM ÖFFNEN DRÜCKEN deu
VF AP-A1AGR05 POUSSER POUR SORTIR fra
VF AP-A1AGR06 PULSAR PARA SALIR spa
VF AP-A1AGR07 НАЖАТЬ ДЛЯ ВЫХОДА rus
VF AP-A1AGR08 NACISNĄĆ ABY WYJŚĆ pol
VF AP-A1AGR09 PRESSIONAR PARA SAIR por

Labels with laser engraving

Labels for single EROUND line devices, adjustable by 90° in 90° increments. 29,6 2,5
Available in black, grey, and yellow; the engraving is via laser, directly on the label itself. This
avoids having to apply additional labels, and the command description remains permanent
30

and indelible, for the entire lifetime of the label.

Labels are customisable with various laser engraving types, according to customer
14,8

requirements.

Pieces/
Article Description
Pack

VE฀TF12H12GB80฀ Black label with inscription "UNLOCK" 1

VE฀TF12H12GB81 Black label with inscription "DOOR UNLOCK" 1

VE฀TF12H12L495 Black label with inscription "UNLOCK" rotated 180° 1

VE฀TF12H12L496 Black label with inscription "DOOR UNLOCK" rotated 180° 1

All values in the drawings are in mm  The 2D and 3D files are available at www.pizzato.com

Remote escape release 4

 Remote escape release for NG and NS series safety switches

Notes

5 Remote escape release

 Notes

Remote escape release 6

 General Catalogue General Catalogue General Catalogue Lift General Cata-
Detection HMI Safety logue

Website
www.pizzato.com

PA S S I O N FO R Q U A L I T Y
Pizzato Elettrica s.r.l. via฀Torino,฀1฀-฀36063฀Marostica฀(VI)฀Italy
Phone: +39 0424 470 930
E-mail: [email protected]
Website: www.pizzato.com

}<!l)sp"=f gj j<
ZE FGL31A21-ENG

Any information or application example, connection diagrams included, described in this document are to be intended as purely descriptive. The choice and application of
the products in conformity with the standards, in order to avoid damage to persons or goods, is the user’s responsibility. The drawings and data contained in this document
are not binding and we reserve the right, in order to improve the quality of our products, to modify them at any time without prior notice. All rights to the contents of this
publication are reserved in accordance with current legislation on the protection of intellectual property. The reproduction, publication, distribution and modification, total or
partial, of all or part of the original material contained therein (including, but not limited to, texts, images, graphics), whether on paper or in electronic form, are expressly
prohibited without written permission from Pizzato Elettrica Srl. All rights reserved. © 2021 Copyright Pizzato Elettrica.