Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Yogesh Khandelwal

    Uploaded by

    Yogesh khandelwal
    The document summarizes several experiments on different rectifier circuits. It describes: 1) Testing a half-wave rectifier without a capacitor and calculating the required capacitor value to limit ripple voltage to 10%. 2) Performing mathematical analysis on the output voltage of a half-wave rectifier. 3) Examining the waveforms of a full-wave rectifier without and with a capacitor, and calculating the capacitor value to restrict ripple to 10%. 4) Conducting mathematical analysis of the full-wave rectifier output voltage. 5) Investigating the waveforms of a three-phase three-pulse rectifier without and with a capacitor, and determining the capacitor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Yogesh Khandelwal

    Uploaded by

    Yogesh khandelwal
    27 views8 pages
    The document summarizes several experiments on different rectifier circuits. It describes: 1) Testing a half-wave rectifier without a capacitor and calculating the required capacitor value to limit ripple voltage to 10%. 2) Performing mathematical analysis on the output voltage of a half-wave rectifier. 3) Examining the waveforms of a full-wave rectifier without and with a capacitor, and calculating the capacitor value to restrict ripple to 10%. 4) Conducting mathematical analysis of the full-wave rectifier output voltage. 5) Investigating the waveforms of a three-phase three-pulse rectifier without and with a capacitor, and determining the capacitor

    Original Description:

    3

    Original Title

    20110239 Yogesh Khandelwal (16)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes several experiments on different rectifier circuits. It describes: 1) Testing a half-wave rectifier without a capacitor and calculating the required capacitor value to limit ripple voltage to 10%. 2) Performing mathematical analysis on the output voltage of a half-wave rectifier. 3) Examining the waveforms of a full-wave rectifier without and with a capacitor, and calculating the capacitor value to restrict ripple to 10%. 4) Conducting mathematical analysis of the full-wave rectifier output voltage. 5) Investigating the waveforms of a three-phase three-pulse rectifier without and with a capacitor, and determining the capacitor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views8 pages

    Yogesh Khandelwal

    Uploaded by

    Yogesh khandelwal
    The document summarizes several experiments on different rectifier circuits. It describes: 1) Testing a half-wave rectifier without a capacitor and calculating the required capacitor value to limit ripple voltage to 10%. 2) Performing mathematical analysis on the output voltage of a half-wave rectifier. 3) Examining the waveforms of a full-wave rectifier without and with a capacitor, and calculating the capacitor value to restrict ripple to 10%. 4) Conducting mathematical analysis of the full-wave rectifier output voltage. 5) Investigating the waveforms of a three-phase three-pulse rectifier without and with a capacitor, and determining the capacitor

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    Q.1 first, we did the experiment of half wave uncontrolled rectifier without any capacitor.

    This is
    the waveform we get.

    waveform after we apply the capacitor


    To restrict the output voltage ripple voltage to 10% we decided the capacitor value with this
    formula

    C=t/(0.1*R) where t is the Time period of Half wave output which is 20 mili second (frequency is
    50hz) and R we have used is 500 ohm so capacitance is coming 400 micro farad and we have
    used 440 microfarad capacitor because we don’t have exact 400 microfarad capacitor.

    Mathematical analysis of half-wave rectifier


    After passing through supply voltage through a step-down transformer source voltage RMS
    value is coming 13.31 volts. peak value is (13.31*root(2)) and in half wave rectifier we get output
    dc voltage is (peak_value/pi) in our case it is come theoretically according to this formula 5.9916
    volts and in the experiment, we are getting 5.832volt.

    Full wave rectifier


    This is a waveform of a full wave rectifier without a capacitor we get

    after we apply the capacitor below the waveform we get (yellow denotes voltage and blue
    denotes current) through our resistive load.
    To restrict the output voltage ripple voltage to 10% we decided the capacitor value with this
    formula

    C=t/(0.1*R) where t is the Time period of Half wave output which is 10 millisecond (The time
    period is reduced to half compared to half wave rectifier), and R we have used is 500 ohm, so
    capacitance is coming to 200 microfarads and we have used 240 microfarad capacitor because
    we don’t have exact 200 microfarad capacitor.

    Mathematical analysis of full wave rectifier

    After passing through supply voltage through a step-down transformer source voltage RMS
    value is coming 13.31 volts. peak value is (13.31*root(2)) and in half wave rectifier we get output
    dc voltage is (2*peak_value/pi) in our case it is come theoretically according to this formula
    11.9832 volts and in the experiment, we are getting 10.3volt.

    For calculating ripple in output voltage we use (the delta voltage/ peak voltage ) method so delta
    v we are getting 1.28 volts and peak voltage is (13.31*root(2)) so this ratio is coming to 6.8
    percent)(which is lower than 10%) because we are using a higher capacitor that's why this ratio
    value is less.
    Three-phase controlled three pulse

    This is waveform without capacitor

    After applying capacitor we are getting such waveform


    To restrict the output voltage ripple voltage to 5% we decided the capacitor value with this
    formula

    C=t/(0.05*R) where t is the Time period of Half wave output which is (20/3) mili second
    (frequency is 50hz) and R we have used is 500 ohm so capacitance is coming 266.66
    microfarads.

    Three phase Six pulse rectifier


    Without capacitor waveform

    After capacitor waveform


    To restrict the output voltage ripple voltage to 5% we decided the capacitor value with this
    formula

    C=t/(0.05*R) where t is the Time period of Half wave output which is (20/6) mili second
    (frequency is 50hz) and R we have used is 500 ohm so capacitance is coming 133.33
    microfarad capacitor.

    You might also like