Scribd
Upload
68 views3 pages

Assignment 1

1) Determine the type of amplifier circuit, draw its small signal model, and calculate its gain (Av) using specified transistor parameters. 2) Calculate the gain (Vo/Vi) of a circuit, showing the steps. 3) Determine the gain of a given amplifier circuit. 4) Calculate the gain of a multi-transistor stage when all transistors have a specified W/L ratio and the biasing current is given. 5) For a given amplifier circuit, calculate the output voltage (VOV), drain current (ID), drain-source voltage (VDS), and voltage gain (Av) using specified transistor parameters and voltages.

Uploaded by

Zain Nadeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views3 pages

Assignment 1

1) Determine the type of amplifier circuit, draw its small signal model, and calculate its gain (Av) using specified transistor parameters. 2) Calculate the gain (Vo/Vi) of a circuit, showing the steps. 3) Determine the gain of a given amplifier circuit. 4) Calculate the gain of a multi-transistor stage when all transistors have a specified W/L ratio and the biasing current is given. 5) For a given amplifier circuit, calculate the output voltage (VOV), drain current (ID), drain-source voltage (VDS), and voltage gain (Av) using specified transistor parameters and voltages.

Uploaded by

Zain Nadeem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EE341 Microelectronic Design

Assignment 1
Deadline: 2nd Feb. 2022
50 points
Question 1:
Determine the type of following amplifier. Draw small signal model. Also determine gain (Av) of
this amplifier. Take λ = 0.1 /V, gm1= 12.14 mS, (W/L)1=20/0.18 , (W/L)2=40/0.14. (W/L)1=50.

Question 2:
Find the gain Vo/Vi. Show steps of your work.
Question 3:
Determine the gain of the following circuit:

Question 4:
All the transistors have W/L = 12/0.5 in the figure below and you can assume biasing current, I = 100 uA.
What is the gain of the stage?
Question 5:
Consider the amplifier circuit shown in Figure. The transistor is specified to have Vt=0.4 V, Kn’=0.4 mA/V2
, W/L = 10, and lambda=0. Also, let VDD=1.8V, RD =17.5kohms , and VGS=0.6 V. For vGS = 0V, vDS=0V, Find
VOV , ID , VDS and Av.

You might also like