Scribd Logo
Upload

Welcome to Scribd!

  • 55 views

    Piston Pin and Bush Measurement July 2015

    Uploaded by

    Geraldo Gazeto
    This service report documents the measuring of piston pins and bushes for an engine. It records the diameter measurements for piston pins and bush inner diameters, as well as the clearance between them, for cylinders A1 through A9 and B1 through B9. The standard and maximum allowed clearances are also provided. The measurements will help determine if any parts need replacement due to wear.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Piston Pin and Bush Measurement July 2015

    Uploaded by

    Geraldo Gazeto
    55 views1 page
    This service report documents the measuring of piston pins and bushes for an engine. It records the diameter measurements for piston pins and bush inner diameters, as well as the clearance between them, for cylinders A1 through A9 and B1 through B9. The standard and maximum allowed clearances are also provided. The measurements will help determine if any parts need replacement due to wear.

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This service report documents the measuring of piston pins and bushes for an engine. It records the diameter measurements for piston pins and bush inner diameters, as well as the clearance between them, for cylinders A1 through A9 and B1 through B9. The standard and maximum allowed clearances are also provided. The measurements will help determine if any parts need replacement due to wear.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    55 views1 page

    Piston Pin and Bush Measurement July 2015

    Uploaded by

    Geraldo Gazeto
    This service report documents the measuring of piston pins and bushes for an engine. It records the diameter measurements for piston pins and bush inner diameters, as well as the clearance between them, for cylinders A1 through A9 and B1 through B9. The standard and maximum allowed clearances are also provided. The measurements will help determine if any parts need replacement due to wear.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    Service report STX Service Americas

    Measuring of piston pin and bush


    ENG Model Owner
    Plant/Vessel Date
    Insp. Item Unit 1/100mm

    Total Run Hours R/H after last Ovhl

    T Standard Max.
    Items ( New) Allowance
    X
    D Piston pin 145mm
    out dia( X ) -0.005 ~ 0.02 -
    E
    P S
    Bush 145mm -
    inner dia ( E ) +0.16 ~ 0.22

    Clearance ( D ) 0.17 ~ 0.24 0.31


    B

    Cyl. No. A1 A2 A3 A4 A5 A6 A7 A8 A9
    Items
    Piston pin TB
    out dia ( X ) PS
    TB
    Bush inner dia ( E )
    PS
    Clearance D TB - - - - - - - - -
    D=E-X PS - - - - - - - - -

    Cyl. No. B1 B2 B3 B4 B5 B6 B7 B8 B9
    Items
    Piston pin TB
    out dia ( X ) PS
    TB
    Bush inner dia ( E )
    PS
    Clearance D TB - - - - - - - - -
    D=E-X PS - - - - - - - - -
    Remarks:

    STX Service Americas


    Workshop / Offices
    11995 FM 529, Houston, TX 77041
    Tel: 713-934-0056 Fax: 713-637-4030

    You might also like