Using kgdb and the kgdb Internals

Jason Wessel
[email protected]

Tom Rini
[email protected]

Amit S. Kale
[email protected]

Using kgdb and the kgdb Internals by Jason Wessel by Tom Rini by Amit S. Kale Copyright 2008 Wind River Systems, Inc. Copyright 2004-2005 MontaVista Software, Inc. Copyright 2004 Amit S. Kale
This le is licensed under the terms of the GNU General Public License version 2. This program is licensed "as is" without any warranty of any kind, whether express or implied.

Table of Contents
1. Introduction............................................................................................................................................1 2. Compiling a kernel.................................................................................................................................2 3. Enable kgdb for debugging ...................................................................................................................3 3.1. Kernel parameter: kgdbwait ........................................................................................................3 3.2. Kernel parameter: kgdboc ...........................................................................................................3 3.2.1. Using kgdboc..................................................................................................................3 3.3. Kernel parameter: kgdbcon .........................................................................................................4 4. Connecting gdb ......................................................................................................................................6 5. kgdb Test Suite .......................................................................................................................................7 6. KGDB Internals .....................................................................................................................................8 6.1. Architecture Specics .................................................................................................................8 kgdb_skipexception ..................................................................................................................9 kgdb_post_primary_code .......................................................................................................10 kgdb_disable_hw_debug ........................................................................................................11 kgdb_breakpoint .....................................................................................................................12 kgdb_arch_init........................................................................................................................12 kgdb_arch_exit .......................................................................................................................13 pt_regs_to_gdb_regs...............................................................................................................14 sleeping_thread_to_gdb_regs .................................................................................................15 gdb_regs_to_pt_regs...............................................................................................................15 kgdb_arch_handle_exception .................................................................................................16 kgdb_roundup_cpus ...............................................................................................................17 struct kgdb_arch .....................................................................................................................18 struct kgdb_io .........................................................................................................................19 6.2. kgdboc internals ........................................................................................................................21 7. Credits...................................................................................................................................................22

iii

Chapter 1. Introduction
kgdb is a source level debugger for linux kernel. It is used along with gdb to debug a linux kernel. The expectation is that gdb can be used to "break in" to the kernel to inspect memory, variables and look through call stack information similar to what an application developer would use gdb for. It is possible to place breakpoints in kernel code and perform some limited execution stepping. Two machines are required for using kgdb. One of these machines is a development machine and the other is a test machine. The kernel to be debugged runs on the test machine. The development machine runs an instance of gdb against the vmlinux le which contains the symbols (not boot image such as bzImage, zImage, uImage...). In gdb the developer species the connection parameters and connects to kgdb. The type of connection a developer makes with gdb depends on the availability of kgdb I/O modules compiled as builtins or kernel modules in the test machines kernel.

Chapter 2. Compiling a kernel

To enable CONFIG_KGDB you should rst turn on "Prompt for development and/or incomplete code/drivers" (CONFIG_EXPERIMENTAL) in "General setup", then under the "Kernel debugging" select "KGDB: kernel debugging with remote gdb". It is advised, but not required that you turn on the CONFIG_FRAME_POINTER kernel option. This option inserts code to into the compiled executable which saves the frame information in registers or on the stack at different points which will allow a debugger such as gdb to more accurately construct stack back traces while debugging the kernel. If the architecture that you are using supports the kernel option CONFIG_DEBUG_RODATA, you should consider turning it off. This option will prevent the use of software breakpoints because it marks certain regions of the kernels memory space as read-only. If kgdb supports it for the architecture you are using, you can use hardware breakpoints if you desire to run with the CONFIG_DEBUG_RODATA option turned on, else you need to turn off this option. Next you should choose one of more I/O drivers to interconnect debugging host and debugged target. Early boot debugging requires a KGDB I/O driver that supports early debugging and the driver must be built into the kernel directly. Kgdb I/O driver conguration takes place via kernel or module parameters, see following chapter. The kgdb test compile options are described in the kgdb test suite chapter.

Chapter 3. Enable kgdb for debugging

In order to use kgdb you must activate it by passing conguration information to one of the kgdb I/O drivers. If you do not pass any conguration information kgdb will not do anything at all. Kgdb will only actively hook up to the kernel trap hooks if a kgdb I/O driver is loaded and congured. If you uncongure a kgdb I/O driver, kgdb will unregister all the kernel hook points. All drivers can be recongured at run time, if CONFIG_SYSFS and CONFIG_MODULES are enabled, by echoing a new cong string to /sys/module/<driver>/parameter/<option>. The driver can be uncongured by passing an empty string. You cannot change the conguration while the debugger is attached. Make sure to detach the debugger with the detach command prior to trying uncongure a kgdb I/O driver.

3.1. Kernel parameter: kgdbwait

The Kernel command line option kgdbwait makes kgdb wait for a debugger connection during booting of a kernel. You can only use this option you compiled a kgdb I/O driver into the kernel and you specied the I/O driver conguration as a kernel command line option. The kgdbwait parameter should always follow the conguration parameter for the kgdb I/O driver in the kernel command line else the I/O driver will not be congured prior to asking the kernel to use it to wait. The kernel will stop and wait as early as the I/O driver and architecture will allow when you use this option. If you build the kgdb I/O driver as a kernel module kgdbwait will not do anything.

3.2. Kernel parameter: kgdboc

The kgdboc driver was originally an abbreviation meant to stand for "kgdb over console". Kgdboc is designed to work with a single serial port. It was meant to cover the circumstance where you wanted to use a serial console as your primary console as well as using it to perform kernel debugging. Of course you can also use kgdboc without assigning a console to the same port.

3.2.1. Using kgdboc

You can congure kgdboc via sysfs or a module or kernel boot line parameter depending on if you build with CONFIG_KGDBOC as a module or built-in. 1. From the module load or build-in

kgdboc=<tty-device>,[baud]

Chapter 3. Enable kgdb for debugging The example here would be if your console port was typically ttyS0, you would use something like kgdboc=ttyS0,115200 or on the ARM Versatile AB you would likely use
kgdboc=ttyAMA0,115200

2. From sysfs

echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc

NOTE: Kgdboc does not support interrupting the target via the gdb remote protocol. You must manually send a sysrq-g unless you have a proxy that splits console output to a terminal problem and has a separate port for the debugger to connect to that sends the sysrq-g for you. When using kgdboc with no debugger proxy, you can end up connecting the debugger for one of two entry points. If an exception occurs after you have loaded kgdboc a message should print on the console stating it is waiting for the debugger. In case you disconnect your terminal program and then connect the debugger in its place. If you want to interrupt the target system and forcibly enter a debug session you have to issue a Sysrq sequence and then type the letter g. Then you disconnect the terminal session and connect gdb. Your options if you dont like this are to hack gdb to send the sysrq-g for you as well as on the initial connect, or to use a debugger proxy that allows an unmodied gdb to do the debugging.

3.3. Kernel parameter: kgdbcon

Kgdb supports using the gdb serial protocol to send console messages to the debugger when the debugger is connected and running. There are two ways to activate this feature. 1. Activate with the kernel command line option:

kgdbcon

2. Use sysfs before conguring an io driver

echo 1 > /sys/module/kgdb/parameters/kgdb_use_con

NOTE: If you do this after you congure the kgdb I/O driver, the setting will not take effect until the next point the I/O is recongured.

Chapter 3. Enable kgdb for debugging IMPORTANT NOTE: Using this option with kgdb over the console (kgdboc) is not supported.

Chapter 4. Connecting gdb

If you are using kgdboc, you need to have used kgdbwait as a boot argument, issued a sysrq-g, or the system you are going to debug has already taken an exception and is waiting for the debugger to attach before you can connect gdb. If you are not using different kgdb I/O driver other than kgdboc, you should be able to connect and the target will automatically respond. Example (using a serial port):
% gdb ./vmlinux (gdb) set remotebaud 115200 (gdb) target remote /dev/ttyS0

Example (kgdb to a terminal server on tcp port 2012):

% gdb ./vmlinux (gdb) target remote 192.168.2.2:2012

Once connected, you can debug a kernel the way you would debug an application program. If you are having problems connecting or something is going seriously wrong while debugging, it will most often be the case that you want to enable gdb to be verbose about its target communications. You do this prior to issuing the target remote command by typing in: set remote debug 1

Chapter 5. kgdb Test Suite

When kgdb is enabled in the kernel cong you can also elect to enable the cong parameter KGDB_TESTS. Turning this on will enable a special kgdb I/O module which is designed to test the kgdb internal functions. The kgdb tests are mainly intended for developers to test the kgdb internals as well as a tool for developing a new kgdb architecture specic implementation. These tests are not really for end users of the Linux kernel. The primary source of documentation would be to look in the drivers/misc/kgdbts.c le. The kgdb test suite can also be congured at compile time to run the core set of tests by setting the kernel cong parameter KGDB_TESTS_ON_BOOT. This particular option is aimed at automated regression testing and does not require modifying the kernel boot cong arguments. If this is turned on, the kgdb test suite can be disabled by specifying "kgdbts=" as a kernel boot argument.

Chapter 6. KGDB Internals

6.1. Architecture Specics
Kgdb is organized into three basic components: 1. kgdb core The kgdb core is found in kernel/kgdb.c. It contains:

All the logic to implement the gdb serial protocol A generic OS exception handler which includes syncing the processors into a stopped state on an multi cpu system. The API to talk to the kgdb I/O drivers The API to make calls to the arch specic kgdb implementation The logic to perform safe memory reads and writes to memory while using the debugger A full implementation for software breakpoints unless overridden by the arch

2. kgdb arch specic implementation This implementation is generally found in arch/*/kernel/kgdb.c. As an example, arch/x86/kernel/kgdb.c contains the specics to implement HW breakpoint as well as the initialization to dynamically register and unregister for the trap handlers on this architecture. The arch specic portion implements:

contains an arch specic trap catcher which invokes kgdb_handle_exception() to start kgdb about doing its work translation to and from gdb specic packet format to pt_regs Registration and unregistration of architecture specic trap hooks Any special exception handling and cleanup NMI exception handling and cleanup (optional)HW breakpoints

3. kgdb I/O driver Each kgdb I/O driver has to provide an implemenation for the following:

conguration via builtin or module

Chapter 6. KGDB Internals

dynamic conguration and kgdb hook registration calls read and write character interface A cleanup handler for unconguring from the kgdb core (optional) Early debug methodology

Any given kgdb I/O driver has to operate very closely with the hardware and must do it in such a way that does not enable interrupts or change other parts of the system context without completely restoring them. The kgdb core will repeatedly "poll" a kgdb I/O driver for characters when it needs input. The I/O driver is expected to return immediately if there is no data available. Doing so allows for the future possibility to touch watch dog hardware in such a way as to have a target system not reset when these are enabled.

If you are intent on adding kgdb architecture specic support for a new architecture, the architecture should dene HAVE_ARCH_KGDB in the architecture specic Kcong le. This will enable kgdb for the architecture, and at that point you must create an architecture specic kgdb implementation. There are a few ags which must be set on every architecture in their <asm/kgdb.h> le. These are:

NUMREGBYTES: The size in bytes of all of the registers, so that we can ensure they will all t into a packet. BUFMAX: The size in bytes of the buffer GDB will read into. This must be larger than NUMREGBYTES. CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call ush_cache_range or ush_icache_range. On some architectures, these functions may not be safe to call on SMP since we keep other CPUs in a holding pattern.

There are also the following functions for the common backend, found in kernel/kgdb.c, that must be supplied by the architecture-specic backend unless marked as (optional), in which case a default function maybe used if the architecture does not need to provide a specic implementation.

kgdb_skipexception
LINUX

Chapter 6. KGDB Internals Kernel Hackers ManualApril 2009

Name
kgdb_skipexception (optional) exit kgdb_handle_exception early

Synopsis
int kgdb_skipexception (int exception, struct pt_regs * regs);

Arguments
exception

Exception vector number

regs

Current struct pt_regs.

Description
On some architectures it is required to skip a breakpoint exception when it occurs after a breakpoint has been removed. This can be implemented in the architecture specic portion of for kgdb.

kgdb_post_primary_code
LINUX
Kernel Hackers ManualApril 2009

Name
kgdb_post_primary_code (optional) Save error vector/code numbers.

Synopsis
void kgdb_post_primary_code (struct pt_regs * regs, int e_vector, int err_code);

10

Chapter 6. KGDB Internals

Arguments
regs

Original pt_regs.
e_vector

Original error vector.

err_code

Original error code.

Description
This is usually needed on architectures which support SMP and KGDB. This function is called after all the secondary cpus have been put to a know spin state and the primary CPU has control over KGDB.

kgdb_disable_hw_debug
LINUX
Kernel Hackers ManualApril 2009

Name
kgdb_disable_hw_debug (optional) Disable hardware debugging hook

Synopsis
void kgdb_disable_hw_debug (struct pt_regs * regs);

Arguments
regs

Current struct pt_regs.

11

Chapter 6. KGDB Internals

Description
This function will be called if the particular architecture must disable hardware debugging while it is processing gdb packets or handling exception.

kgdb_breakpoint
LINUX
Kernel Hackers ManualApril 2009

Name
kgdb_breakpoint compiled in breakpoint

Synopsis
void kgdb_breakpoint ( void);

Arguments
void

no arguments

Description

This will be impelmented a static inline per architecture. This function is called by the kgdb core to execute an architecture specic trap to cause kgdb to enter the exception processing.

kgdb_arch_init
LINUX

12

Chapter 6. KGDB Internals Kernel Hackers ManualApril 2009

Name
kgdb_arch_init Perform any architecture specic initalization.

Synopsis
int kgdb_arch_init ( void);

Arguments
void

no arguments

Description

This function will handle the initalization of any architecture specic callbacks.

kgdb_arch_exit
LINUX
Kernel Hackers ManualApril 2009

Name
kgdb_arch_exit Perform any architecture specic uninitalization.

Synopsis
void kgdb_arch_exit ( void);

13

Chapter 6. KGDB Internals

Arguments
void

no arguments

Description

This function will handle the uninitalization of any architecture specic callbacks, for dynamic registration and unregistration.

pt_regs_to_gdb_regs
LINUX
Kernel Hackers ManualApril 2009

Name
pt_regs_to_gdb_regs Convert ptrace regs to GDB regs

Synopsis
void pt_regs_to_gdb_regs (unsigned long * gdb_regs, struct pt_regs * regs);

Arguments
gdb_regs

A pointer to hold the registers in the order GDB wants.

regs

The struct pt_regs of the current process.

14

Chapter 6. KGDB Internals

Description
Convert the pt_regs in regs into the format for registers that GDB expects, stored in gdb_regs.

sleeping_thread_to_gdb_regs
LINUX
Kernel Hackers ManualApril 2009

Name
sleeping_thread_to_gdb_regs Convert ptrace regs to GDB regs

Synopsis
void sleeping_thread_to_gdb_regs (unsigned long * gdb_regs, struct task_struct * p);

Arguments
gdb_regs

A pointer to hold the registers in the order GDB wants.

p

The struct task_struct of the desired process.

Description
Convert the register values of the sleeping process in p to the format that GDB expects. This function is called when kgdb does not have access to the struct pt_regs and therefore it should ll the gdb registers gdb_regs with what has been saved in struct thread_struct thread eld during switch_to.

15

Chapter 6. KGDB Internals

gdb_regs_to_pt_regs
LINUX
Kernel Hackers ManualApril 2009

Name
gdb_regs_to_pt_regs Convert GDB regs to ptrace regs.

Synopsis
void gdb_regs_to_pt_regs (unsigned long * gdb_regs, struct pt_regs * regs);

Arguments
gdb_regs

A pointer to hold the registers weve received from GDB.

regs

A pointer to a struct pt_regs to hold these values in.

Description
Convert the GDB regs in gdb_regs into the pt_regs, and store them in regs.

kgdb_arch_handle_exception
LINUX
Kernel Hackers ManualApril 2009

Name
kgdb_arch_handle_exception Handle architecture specic GDB packets.

16

Chapter 6. KGDB Internals

Synopsis
int kgdb_arch_handle_exception (int vector, int signo, int err_code, char * remcom_in_buffer, char * remcom_out_buffer, struct pt_regs * regs);

Arguments
vector

The error vector of the exception that happened.

signo

The signal number of the exception that happened.

err_code

The error code of the exception that happened.

remcom_in_buffer

The buffer of the packet we have read.

remcom_out_buffer

The buffer of BUFMAX bytes to write a packet into.

regs

The struct pt_regs of the current process.

Description
This function MUST handle the c and s command packets, as well packets to set / remove a hardware breakpoint, if used. If there are additional packets which the hardware needs to handle, they are handled here. The code should return -1 if it wants to process more packets, and a 0 or 1 if it wants to exit from the kgdb callback.

kgdb_roundup_cpus
LINUX

17

Chapter 6. KGDB Internals Kernel Hackers ManualApril 2009

Name
kgdb_roundup_cpus Get other CPUs into a holding pattern

Synopsis
void kgdb_roundup_cpus (unsigned long flags);

Arguments
flags

Current IRQ state

Description
On SMP systems, we need to get the attention of the other CPUs and get them be in a known state. This should do what is needed to get the other CPUs to call kgdb_wait. Note that on some arches, the NMI approach is not used for rounding up all the CPUs. For example, in case of MIPS, smp_call_function is used to roundup CPUs. In this case, we have to make sure that interrupts are enabled before calling smp_call_function. The argument to this function is the ags that will be used when restoring the interrupts. There is local_irq_save call before kgdb_roundup_cpus. On non-SMP systems, this is not called.

struct kgdb_arch
LINUX
Kernel Hackers ManualApril 2009

Name
struct kgdb_arch Describe architecture specic values.

18

Chapter 6. KGDB Internals

Synopsis
struct kgdb_arch { unsigned char gdb_bpt_instr[BREAK_INSTR_SIZE]; unsigned long flags; int (* set_breakpoint) (unsigned long, char *); int (* remove_breakpoint) (unsigned long, char *); int (* set_hw_breakpoint) (unsigned long, int, enum kgdb_bptype); int (* remove_hw_breakpoint) (unsigned long, int, enum kgdb_bptype); void (* remove_all_hw_break) (void); void (* correct_hw_break) (void); };

Members
gdb_bpt_instr[BREAK_INSTR_SIZE] The instruction to trigger a breakpoint. ags Flags for the breakpoint, currently just KGDB_HW_BREAKPOINT. set_breakpoint Allow an architecture to specify how to set a software breakpoint. remove_breakpoint Allow an architecture to specify how to remove a software breakpoint. set_hw_breakpoint Allow an architecture to specify how to set a hardware breakpoint. remove_hw_breakpoint Allow an architecture to specify how to remove a hardware breakpoint. remove_all_hw_break Allow an architecture to specify how to remove all hardware breakpoints. correct_hw_break Allow an architecture to specify how to correct the hardware debug registers.

19

Chapter 6. KGDB Internals

struct kgdb_io
LINUX
Kernel Hackers ManualApril 2009

Name
struct kgdb_io Describe the interface for an I/O driver to talk with KGDB.

Synopsis
struct kgdb_io { const char * name; int (* read_char) (void); void (* write_char) (u8); void (* flush) (void); int (* init) (void); void (* pre_exception) (void); void (* post_exception) (void); };

Members
name Name of the I/O driver. read_char Pointer to a function that will return one char. write_char Pointer to a function that will write one char. ush Pointer to a function that will ush any pending writes. init Pointer to a function that will initialize the device. pre_exception Pointer to a function that will do any prep work for the I/O driver.

20

Chapter 6. KGDB Internals post_exception Pointer to a function that will do any cleanup work for the I/O driver.

6.2. kgdboc internals

The kgdboc driver is actually a very thin driver that relies on the underlying low level to the hardware driver having "polling hooks" which the to which the tty driver is attached. In the initial implementation of kgdboc it the serial_core was changed to expose a low level uart hook for doing polled mode reading and writing of a single character while in an atomic context. When kgdb makes an I/O request to the debugger, kgdboc invokes a call back in the serial core which in turn uses the call back in the uart driver. It is certainly possible to extend kgdboc to work with non-uart based consoles in the future. When using kgdboc with a uart, the uart driver must implement two callbacks in the struct uart_ops. Example from drivers/8250.c:
#ifdef CONFIG_CONSOLE_POLL .poll_get_char = serial8250_get_poll_char, .poll_put_char = serial8250_put_poll_char, #endif

Any implementation specics around creating a polling driver use the #ifdef CONFIG_CONSOLE_POLL, as shown above. Keep in mind that polling hooks have to be implemented in such a way that they can be called from an atomic context and have to restore the state of the uart chip on return such that the system can return to normal when the debugger detaches. You need to be very careful with any kind of lock you consider, because failing here is most going to mean pressing the reset button.

21

Chapter 7. Credits
The following people have contributed to this document: 1. Amit Kale<[email protected]> 2. Tom Rini<[email protected]> In March 2008 this document was completely rewritten by:

Jason Wessel<[email protected]>

22