Beitman 1960
Uploaded by
Dan Stefan ComanBeitman 1960
Uploaded by
Dan Stefan ComanMost - en Needed
1960 VOLUME R-20
RADIO
DIAGRAMS
and Servicing Information
"U"Y
Compiled by
M. N. BEITMAN
VOLUME R-20
SUPREME PUBLICATIONS
PRICR$29.
Most - en - Needed
1960 Volume R-20
RADIO
DIAGRAMS
and Servicing Information
THEORY
Compiled by
M. N. BEITMAN
SUPREME PUBLICATIONS
by Supreme Publications, 1g60. Material copyrighted, reproduction prohibited.
Supreme Publications 1760 Balsam Road, Highland Park, Illinois
(Warehouse and Branch Office in Chicago, Illinois)
RADIO DIAGRAM MANUALS SUPREME TELEVISION MANUALS
0 New 1959 VOLUME
$2.50 0 ADDITIONAL 1959 TV, Vol. TV -16, $3.
Repair quickly all new 1959 sets as This new ADDITIf 'NAL volume of
well as older radios. This big volume television factory data will give
contains clearly printed, large sche- you everything you need to repair
matics, needed alignment data, re- and adjust all present-day TV sets.
placement parts lists, voltage values, The television series manuals are
and information on stage gain, loca- amazing bargains and defy compe-
tion of trimmers, and dial stringing, tition. The 1959 volume contains
for all important new 1959 sets. In- circuit explanations, 192 pages of
cludes material on portables, clock alignment facts, test patterns, re-
radios, record changers, FM, and sponse curves, waveforms, voltage
auto sets. A worthy companion to charts, hints, and dozens of mam-
seventeen previous volumes used by moth double -page work -bends di-
over 143,000 shrewd radio service- agrams. Large sire 81i:2 x 11 inches.
men. Large size: 8% x 11 inches. Sturdy covers. Book binding opens
Manual style binding. flat. Amazing value.
Postpaid, only $25° Price postpaid, only.... $3
RADIO DIAGRAMS FOR PREVIOUS YEARS n I 959TV Manual, TV- 15, $3
Speed up and simplify all radio repairs. Service radios faster, better, EARLIER TV MANUALS FOR 1958 TO 1948
easier, save money and time, use these SUPREME Most -Often -Needed Supreme TV manuals cover all needed service material on every popular
diagram manuals to get ahead. At the low cost (only $2 for most vol- TV set of every important manufacturer. Here is helpful, practical,
umes) you are assured of having for every job needed diagrams and factory -prepared data that will really make TV servicing and adjustment
other essential repair data on 4 out of 5
Clearly printed circuits, parts lists, alignmentsets you will ever service.
data. and helpful service
easy for you. Supreme giant TV manuals have complete circuits, alignment
facts, test patterns, response curves, service hints, recommended changes,
hints are the facts you need. Average volume has 192 pages, large voltage charts, waveforms, and many double -page diagram blueprints.
size 8% x 11 inches. Manual style binding Here is your TV service material to help you do more expert work
quicker, and priced at only Si. Radio manuals described at left.
1958 n 1957 Li 1956 1955
Volume 18 Volume 17 Volume 1,6 Volume
15
EJ 1954
Volume 14
El 1953
Volume 13
LJ 1958 Television Manual, TV -14, $3.
$2.50 $2.50 $2.50 $2.00 El ADDITIONAL 1957 TV, Vol. TV -13, $3.
$2.50 $2.50
lij 1952 n 1951 0 El EARLY 1957 TV Manual, TV -12, $3.
1950 1=1 1949 1948 0 1947
Volume 12 Volume 11 Volume 10 Volume 9 Volume 8 Volume 7 [7] 1956 TV r 1955 TV 7 1955 TV j 1954 TV
$2.50 $2.50 $2.50 $2.50 $2.00 $2.00 Volume TV -11 Additional, TV -I0 Early, Vol, TV -9 Volume TV -8
$3.00 $3.00 $3.00
0 1946 0 1942 D 1941 1940 1926-1938 $3.00
Volume 6 Volume 5 Volume 4 Volume 3 Volume 1 0 1953 TV 0 1952 TV Ll 1951 1V
$2.00 $2.00 $2.nn $2.00 $2.50 Volume TV -7 Volume TV 6 Volume TV S
$3.00 $3.00 $3.00
0 INDEX for all Radio and TV Manuals 250 ri 1949 TV 1948 TV
Volume TV -3 Volume TV -2
1957-58 RCA
$3.00 Volume, $1.50
$3.00
RADIO SERVICING COURSE
Here is your practical radio course of 22 easy -to -follow Simplified Radio Servicing by
lessons. Review fundamentals, learn new servicing tricks. Simplified
Just like a $200.00 correspondence course. Everything in COMPARISON Method Radio
radio servicing. With self -testing questions. Servicing
New edition. Price only $250 Revolutionary different COMPARISON technique per- by
mits you to do expert work on all radio sets. Most repairs Comparison
can he made without test equipment or with only a volt Method
rl TELEVISION SERVICING COURSE ohmmeter. Many simple, point-to-point, cross-retetence,
circuit suggestions locate the faults instantly. Plan copyrighted. Covers
I.et this new course teach you TV servicing. Amazing bargain, every radio set - new and old models. This new servicing technique
complete only $3, full price for all lessons. Giant in size, mammoth presented in handy manual toms, size 8t x 11 inches, 48 pages. Over
in scope, topics just like a $200.00 correspondence course. Lessons 1,000 practical service hints. 26 large, trouble -shooting blueprints. Charts
on picture faults, circuits, adjustments, short-cuts, UHF, alignment for circuit analysis. 114 rests using a 5c resistor. Developed
hints, antenna problems, trouble -shooting, test equipment, picture by M. N. Beitman. New edition. Price only $150
analysis. Special, only 403
0 Practical Radio & Electronics Course
PPACTICAL
n RADIO MATHEMATICS Here is your complete home study course of 35 lessons designed to
RANO MATIMIATICS
now me. aoa
Explains arithmetic and simple algebra in connection with train any beginner to be an expert in radio and electronics. Covers every
units, color code, meter scales, Ohm's law, alternating cur- topic of radio, electronics, with lessons on test equipment, FM, TV, radio.
rents, ohmmeter testing, wattage rating, series and parallel etc. Giant 8% x 11 inches, 3 -in -1 volume, includes all lessons,
connections, capacity, inductance, mixed circuits, vacuum instructor's notes, test questions. New edition. Only... $395
tubes, curves, the decibel, etc., and has numerous
examples. Only 250 ANSWER BOOK to the above course 250
nCheck manuals wanted. Write address over. Return this sheet with your remittance. Books sent postpaid.
Supreme Publications books and manuals are also available at all leading Radio Parts Jobbers.
2
12AU6 12AV6 5005 M3
CONVERTER DETECTOR OUTPUT
VI TI V2 V3
4, SSY
3 LOOP 1400 Kc. *AIR
92Y
7
ANTENNA :115A 2i1:2111_ ±C9 LT2
35.-r 35
6 -.99 CT 14F
C3 .-.6i: OY 6 240E
-.69
5 51 1 - 95 Y
T 1(3 SSP 5 2 mall
5 2 R2
BOTTOM VIEW R3
2200
L1 _OA 29 Cil 68 I 69
410K
C4 MEG CS
L2 )E------4 R5
IF 455KC BOTTOM 1 3
22 *---i( 2200 I4TOK R6 C8A
VIEW 150
w410 ETCHED CIRCLIT GROUND 01
220
180 Ya
GIMMICK 5 tR4
IMP L2
e--
TO REMOVE CHASSIS FOR SERVICING 2MG
VOLUME
3 9.5Y
2 LOOSEN THESE SCREWS UNTIL 2
VOLUME CONTROL
RI
3300
C1B 0
HELD ONLY BA LAST THREADS MOUNTING BRACKET IW
THEN PUSH AGAINST SCREWS 6 CBB
WITH THUMBS. REMOVE SCREWS RI -u 30
2.2 ME
AFTER CHASSIS SUMS FORWARD
NEC
G8C
1 REMOVE THESE SCREWS
CI) 50 MF
RED
.047 NE
LI 35W4
111 7 it WY
RECTIFIER
BLUE V4
AUTO',
SWITCH
M2
RI ION-OEF 12 VAC 24 YAC 79
RB
11:32.0
Ell
L4_ 0
R6 R5 M4 CLOCK 000 C1
40.H_E_Cji MI 12AV6 t2AU6 2W 5005 OSC.
LI
1 1 R6 R8 RI L2 C11
E". 0 12AU6 C3
CII gRIF 0.,..#41 R5 C2
C2
SOW
0 V 1Ai0
TV3\ 000 00
C8A / /' lb
s 0v30
5 88
R71,
o 000
0:1[1±-
C8C
117
--t C4 1 0---110
R4
VOLUME I
1r-
1
000
\ 3
000
4O
C10
Si
cs5,,,,,.4r2:-1-7 (),/
111
R2 C6
C10 R2
A..\
5005 R3 35W4 C7 12AV6 VI/ 455 K C.
Rear View of Etched Circuit Board. Gray area represents etched wiring; Top View of Chassis Showing Location of Components and Alignment Points.
black symbols and lines represent components and connections on opposite side. Note: Alignment Point "D" is a Gimmick on Antenna Loop.
12BE6 12BA6 12AV6 5005
CONVERTER DETECTOR-AVG-4F AMP OUTPUT
vI v3
C) v0
50r M3 105Y SLUT
FERRITE ROD IN SAS CHASSIS 2SOY
TI MO
COUPLAU
LOOP ANT. IN 515 CHASSIS
CI CIO
YO Or
0 CII I
0 6
-MY
T .00511 .00smir
2
_CS SOY
CI 4/ ;
for T3 4PM
II _ J
.0111F
CIII NEC
TC2ISO MR
1(0
3
vow
RIO
II ISO
2 OM
I NEC
220
2 T1 T2 PAS III
CREFI .ti vOLUNI 1200
WI -20 CI
COUP ME RI
L -W- Cl)TA
ty , 66 11(C t417 -7 -V.005111
°c<0
4s,
z.f)0) .01 TON rill 101101 HE!
+ l CISA
_ JOIN
0I31
SORE
+
EA
ISOV ISV
CS N.
oINF
cA,c°
TO REMOVE CHASSIS FOR SERVICING TUBES co
it/ YOGIS
2 LOOSEN THESE SCREWS UNTIL 10 CPC< f
IC DISC cri
HELD ONLY BY LAST THREADS 35 W4
10IIIIIS Mt M2 ri
THEN PUSH AGAINST SCREWS RECTIFIER IVY CO C:79 C -n
y.
WITH THUMBS. REMOVE SCREWS v5 -3
0 410
AFTER CHASSIS SLIDES FORWARD
1 REMOVE THESE SCREWS 12AV6 129A6 1213E6 5005 6 CO 0
CO
L. 10.1MC IIYAC 1104C FP.
T M 9R0 0 o MAC 0o C..11
r- 1 Ilo pm, t;(4
RED NOTES: oo
CO
IF 4451C co CO
Cl2 -0- ETCHED CIRCUIT CROCK CO GO
ALL VOLTAGES TAKEN VA out GO
T i 10 SIGNAL INN?.
.s
ALL CAPACITORS VALUES IN IRE
R5 CO
ir-Anne-- All RESISTORS 112 NAT? ION. FC
0 V5 UNLESS OTHERLSE SPECIFIED. FP CO
CO CO
r- - - - 4C138
R3 ADJUSTMENTS *A' B -C. ACCESSIBLE
C11 R7
O FROM BOTTOM OF CHASSIS
000
{R9-IE- I f - RI 455 Irc
p
r
t
CI
cez 0 r. 1 12BE6
CT 00 I2BA6
0 1/4 0 0 V3 -c%
i
1 -'.111glil.1
ak CC1
--11
4
.4
0 V2 0 3* t2
- L2
0I
12 0 TI
vi 0 14 at/
R8 0 Ht
JR2
* FOR CHASSIS WITHOUT TRIMMER "F" ADJUST GIMMICK ON LOOP ANT.
M3 II? VAC INTERLOCK Top View of Chassis Showing Tube and
M2 Alignment Points Locations.
Bottom View of Etched Circuit Board. Gray area represents etched wiring; black symbols and
lines represents components and connections on opposite side.
1213E6 12BA6 12AV6 5005
CONVERTER DE TECTOR- AVC-AF AMP OUTPUT
v3 V4
LI 55, 1.43 1101 614
COURATE
FEIIITE
100
01E111 610
IS? 02
11-1 0111
.0051IF
T3 4.PM
It Cne IT
RED
6.0110 925 4101
CI
0 Cps
2 211E0 220 4101 T,25
M3
I
VOLUME 1
2 3 6306 - ci
CO uPLATE
4..
TNEN
2 14 56 1
Ya5111
-0- - - -0- 0134 104f1 j +
, 4 JON
001."
1504
L2 T1,T2 I III TOIIf a 504i
0
201104 4 01 101101 El,
-+
3
NOTES:
-1 IT 445 0 ;*
ETCNED CIRCUIT MOUND
/11 10.75
Movie
AC 06., ALL VOLTACES 14011114 VIII, 35W4
!DIAN MI NO POKE 9,
RECTIFIER
AllCAPACITORS VALUES II Ill,
VS
ALL RESISTORS la 110110%.
II UNLESS OTNE11152 SPECIFIED.
328E6 SOCS
'3
SI, 12 Av6 +2006
:k
0
city %7..sr4c crcr,^mc 0 0 JIM crc/frAC
TI RI C5 128E6 L2
fTl
C2
C)
cn
C3
Rear View of Etched Circuit Board. Gray area represents etched wiring;
black symbols and lines represent components and connections on opposite side.
12 M3 5005 R9 C7
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Admiral MODELS 691
CHASSIS 5E5
692
5E5A
.42; BUS
LI
W e L2T RS
T2 C-)
I
T 2k
ANTENNA I
2N411 f , l 2N409 2N410 T3
t2
CIA 1 CONVERTER
:$I 2ND IF -DRIVER
DET
.
01 15
-61V 03 tr. CR2 5
C.i, pit -5.16 RIS
\ -/.PA
21
g.T
4/
_J22.5K
vywe
-466 1
613 RR VOLUME
RI2
3 CIO
1N295 126
566 R0c 5%
C2
CR1
5%
CH R19
i3 1: 111
.47
9.2T
3
NOI SL C9w05 CIII 05 Ty/
R2 RI
MMF r- CI3 .02 1.1) 3V I
6800 156 N 5%
_ CI?
;R3 Ni R4
C4
R9 $R14 RIO RII
1
3900 560.05 uT 3Y 5IK
, 5% TS
160
5%
2.16 1 226 5.66 +I 3V 470
1
1-11/6 .5 BY
I S24fiI
535 kc. 4.55" Kc
2N406, C20 t
.01 C6 60
OUTPUT
04
IunINII lid RI7
6V
14 -0./,Y
16 20 Kc 2N409 2N410 T5 100
O CONVERTER
2N411
WI
;Th° 1ST IF 2ND IF
415A.'
2
rg
J3
C-71. 100
418
-0./16
06 IOng
IOn
CI9
FOUR
GA+
60
RV
J° IM -6.0Y
11/2V
CELLS
-
MI OFF ct a
1 N295 4S5 Kc. SI
R16
3.96
2N406* C2t - 0
AV Ci OUTPUT .01
1400 Kc. 05
1N295
2N406 DET -
3
MOUNTED ON REAR OF BOARD.
L2
4 SWITCH S2 USED ON 5E5A ONLY. BOTTOM 2 5
OUTPUT ALL RESISTORS 1/4 WATT 10% VIEM
UNLESS OTHERWISE SPECIFIED TOP CONNECTION
( MATCHED PAIR ) IF 4556C
COMMON GROUND 1134-1 YELLOW N.C.
Transistor and Alignment Locations. * MATCHED PAIR DOT OLOR CODE DOT
AVC BUS/
c6 , "M. R7
CAPACITOR VALUES IN NICROFARADS
UNLESS OTHERWISE SPECIFIED.
TOTAL CURRENT MN SIGNAL) 5.4 MA
ALL VOLTAGES TAKEN VTR Co:
5
4 TI CRAY
6 T2 WHITE
T3 BROWN
°ICI:. 411 -NOW -4116 02 2
MEN
1
Ci2iiteck3 R10
Ti. T2 113
I ..-. e BOTTOM VIEW
..A. R' c9
IR II T2
I ....24,..*
0.1114.,-.0 ICIO IF
L--
___.
__J LI BASE
- CO -LECTOR
TYPE (PIIN
0.____KSJ.§.
.-
r , +EMITTER
1'--16
RED
,00T
EMITTER
-COLLECTOR
vs -BASE
PNP TYPE TRANSISTOR
AMOUNTED ON REAR OF BOARD
B- BUS
View of Etched Wiring Board. Gray area
represents etched wiring; black symbols and lines
represent components on opposite side.
REMOVING CHASSIS FROM CABINET
To remove cabinet back. simply insert a small coin
into one of the slots on the bottom edge and twist
To remove chassis from cabinet. first remove the
r..,
LOAD BATTERIES WITH TOP OF CASE
tCENTER CAP
cARB0N-ZINC
tW. riA +
..-A.
CENTER CA
END CAP ON CHASSIS -N
C i1=P+
4' CENTER CAP(i+CENTER
CEN... TEFP?+
knobs by pulling them off. Remove the back cover
as instructed above. Remove the four screws at the
corners of the etched board. Lift entire chassis
(etched board with all components) out of the cabi-
FLANGE INDICATES BOTTOM OF CASE MERCURY CELLS
CELLS CENTER CAPS MUST FACE ONLY IN DIRECTIONS SHOWN ABOVE net front.
Later Production Battery Holder Showing
Ordinary and Mercury Type Batteries in Correct Positions. 6
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Admiral MODELS Y793
Pall/S
Y797
CHASSIS 5E5B
Y798
LI
S L20 TI©
IMO CLOCK
--,
OAR T y
T2 OD r
ANTENNA
2N411
.33 - <R21
2N409 4- 2N410 ,r
..,311129
LORE
1.53
wev+: 1°""F
CIA / CONVERTER _L 1ST El _t E41;3 290 IF -DRIVEN : Er 15 tiVOLT-+
.
74z CI
-57r 1
E
12 02 ...c n 05. _
j.ty _ 1 FA'
..g : C12 -1)-5 RIO BATTERY)
;
27r
x. .3
py -1., L.
4- iv- -'2 230.511101
-401 C5 Y RItts
3A CIO
11295 15MLAF i
S.6 see
CP
AsC Z 5%
sr, O
Ctl 1-5% C11 TERNCILIACL'BOARD
119
.41
C3 IE EGl 11
5
I -OFF
3A
.1.1T :21(.05 ..__.c2L1 .05 1.0 31
51
Th Ail AUTO SWITCH
CO .02
18100 :14
IMF
5% )I-
13
,3900 560
CA
OFF
;it
m
33
R6 .11 114
its
RIOt
5.6k
Ci2
90
33
III
410
'106
63
i? (Fi °L1314011
" T5 RATTERIES1
1- RIS
35- KC. ASS KC-.Vj 2N4061, J --0O2,°
OUTPUT
00
II 111111 111111111
-0.14
g 31409 - 2N410 TO
3
MI
2N411 1ST IF LA 2ND IF 475AFA1 -1153 111
11 tOn 100
CONVERTER Fir 2
162.0
O
KC. 1120t
$.OY
10
NADiO.
1/21
4SCue_ 616 2N4064 Ulf
1N295 3.91 OUTPUT .01
05 S2
1400 Kc.
ACC
1N295 Vol ages shown measure( w th n t signal. using fresh tatteries.
DET All readings made with VTVM between transistor terminals
2N406
Alignment Point Locations.
OUTPUT
and B plus I ground I . All voltages are negative.
010I CODE 001
( MATCHED PAIR) .401
RED - COLLECTOR 4 11 CRAY
BASE TYPE (MI 1 It WRITE
To remove cabinet back, simply insert a small coin EMITTER
s.4
COLLECTOR
0-11.
y.ElliTTER
2 1 T3 BROWN
into one of the slots on the bottom edge and twist. 0._11A5E
PIP TYPE TRANSISTOR
T1.12 113
BOTTOM 31EW
To remove chassis from cabinet front, first remove
the knobs by pulling them off. Remove the back cover t NOuNTED ON REAR OF 30360.
as instructed above. Remove the four screws at the ALL RESISTORS i/4 WATT 0/, TOP CONNECTION
corners of the etched board. Lift entire chassis I etched UNLESS OTHERWiSE SPEC1F1ED
IF .155 AC N.0
board with all components) out of the cabinet front. 414 C0111101 GROUND WI
YELLOW
DOT
AVC BUS
/ R7
*---1(-*C7
MATCHED PAIR
CAPACITOR VALUES II MICROFARADS
UNLESS 013E1115E SPECIFIED.
TOTAL CURRENT 111 SIGNAL, 51 NA
ALL vOLTACES 1ARE8 CH 313N
c.Q, - - - 11
02
.1310 , IP- -
CHI 1-
i Rt20/.1 T26 11C9 I
' 3 1 ±'110 '
R11
ut6 .
- ' :314*raCR14
-avyk,--
IC10
L_____J
2 i I : 2 31 ;
40-4(---40 C16
RtS
-Nyth----- 14"$416
ILlis
R9
li
.1 T i
T4. i! ___.'. ti LL:A:-1:7R13* I(
1 r i R14 *R 0 R4
:13T321:
R10
R19
I 1C14
S2
g -VMv-- R2 * MOUNTED ON REAR
OF BOARD
R17
fiCI'19 B-BUSN Rear View of Etched Circuit Board. Gray area represents
J
etched wiring; black symbols and lines represent components
-
:14 IS 31,'
and connections on opposite side.
View Show-
ing Clock Battery in
Correct Position.
3 2 6V 15V
RIET
S3 M2
R16 .-3: 11.1 r St- - -
, .4 .
C21
* L
Q5 ' -'
...._24,
I -
L ___ _J
7
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
CR I
114295
R7 R3
Admiral
MODEL 739
CHASSIS 5F5
00
CIA
C7 ,lr 0,
251108
If 4: FRONT
REAR
I b2 -o /4 I4-00 KC.
IN2951=K1
2N1108
AVC
CONVERTER
4
2N1110dh
.9 9V
1ST lfw 455 ke
NB B 0
(§)
2N11118
Q OUTPUT p2NDIFID 455.KC
RIB
7
MATCHED PAIR
0 I" 0
211680
°lig 144R
Transistor and Alenniont
Locations.
T3 IMPORTANT ALIGNMENT NOTES
.J21412 The holes in the tuning slugs in the IF cans are
square instead of the usual hexagon shape. Use align-
1:161" ment tool, Admiral part number 98A30-21. The slugs
R13
in some sets may be accessible only from the rear,
M MOUNTED ON REAR OF BOARD but are located near the top of the can. Use care, if
View of Etched Wiring Board. Gray area represents etched wiring, black symbols more than one turn is required, to prevent damage to
and lines represent components on opposite side. the slug against the top of the can.
LI
T3 OIN295 DETECTOR
T1 VOLUME
ROD
2N1108 2N1110 2N11116 R13
ANTENNA
CONVERTER ISI If 2ND IF -DRIVER CR2 CI3 2500
01 02 03
-/2Y -lir 115
Ld L JI
5
TII I
IN295
56Y IV R12
fR R19
3300
AVC 220
s
I I4 CR1
CPI
c3 I: RII
--1(14 .05 CO)1-.°5 CH .02 LOMED 1500
.005 --/S C 0
R2 5%
91(' si )1
396
R3 R4
CS
AS
C 7
R6 R7 RN 221900 1.71.-19°0 RIO if10
3300 560 5 39A .05 610 2200 156
3V ?" RI
B BUS
8.81,
COLOR CODE AVC BUS--/'
RED COLLECTOR C18, .0039
DOT
2 T1. VIOLET *2N680 CI6
EMITTER COLLECTOR
BASE TYPE (FIN
4
5 T2 -CRAY
3 T3-1/MITE
OUTPUT
04 :11t
=BY 1
si=f1- 4
+EMITTER V5 MO 12V
R16
T1,12 1T3
PIP TYPE TRANSISTOR _CIS 100
HIT
NOTION VIEW T4 j4 CI T
- AV A -1E6-.4
REMOVING CHASSIS FROM CABINET
3to
10
200:LEI ""A RIO 100 I2V
AI
96 5./1:
1. Remove the two knobs plus the two chassis mount- Nn SIX 9V
11/2V
ing screws at the bottom of the cabinet, if used. CELLS
to OFFo ?
2. Unsnap back cover and remove battery case. 02N680 SY
4' SPAR
SI \
3300 OUTPUT
3. Remove the two screws at the right corners of the 05 CI 9 0039
chassis. NOTES.
4. Keeping one hand on front escutcheon, slide chas- NO SIGNAL CURRENT 7.611A
sis to right to remove from cabinet. ALL RESISTORS I/2 WATT 104.
UNLESS OTHERWISE SPECIFIED
°Vo"A°
NOTE: The left side of the chassis (from rear) is IF 44556C
40 CONNOR GROUND CIO ALL VOLTAGES TAAEN WITH VTVM 2
held by two flanges on the escutcheon and the es- * MATCHED PAIR L2
CAPACITOR VALUES IN MICROFARADS RR RINIOT USED IN All SETS.
cutcheon is held only by the chassis under the flanges. UNLESS OTHERWISE SPECIFIED.
NOTION VIEW
8
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Chassis 7P1, Models 703 and 708
Admiral 5 NOTION
BAN
ANTENNA
2N411
MIXER
2 211409
1ST If 1 -II
4 ° T2 211410
211(1 IF
15 3 iN295
C..
V IC11
VOLUME
RIR ,
NEW 01 02 03
12
LI
ur 'V.: :DETECTOR 1°5
CHEER DOT
OSCILLATOR Irr 6 2
COIL Ci3 14 AID
CISA 3300 3000
OLOR CODE 002 \ nr re:1F JO 5.,.
IV295
TI -CRAY viNf
CAI
TO -WHITE
T3 -SHOWN
H.
IVC
1021011 VIEW
C6 .Oly415, CIO 05 Ai?
TOO
R6 R7 $R11 - C24 OFF -ON
ALL RESISTORS -
u4 WATT 104.
C21-7
.05"7 3v
3v
636 430 42100 qR 270 .05 410 no
L0i0 SW5I7CIF
CI 5% 5%
If 455 RC
-DA COMMON CIMINO OW
05 -5f, -IDS
* MATCHED PAIN R2 \ 44../. IYt IDS
6 FOUR
1
UNLESS OTHERWISE SPECIFIED. 1 'CELLS
1000
CAPACITORS IN MICIOTARROS
ALL VOLTAGES TAKEN WITH VTVII rs
2N412 *211406 sal 01
101AL WNW 30 Who TANA OSCILLATOR 74 OUTPUT 3 T5
t ROWED ON NEAR OF ETCHED BOARD 04 0156
6
211406 -Jr 06
1.1r DRIVER
3
C2I 22
-COLLECTOR 2 1.0 - 05 .03
U-411114 3v
BASE TYPE IPHP)
7./fr
47
NMI
5 or R26
0
+ FRITTER
CI6 001 100
Ail N23 ROOT 710
2
2400 225 ?5600 ,
HO V? Atl RIO 1120
5% 2 4
002 1511 2011 270 560 _RIR Ir
5%
EMITTER COLLECTOR C21
R24 I25
RASE `5 .
ISO 3900
PRP TYPE TRANSISTOR
C16
1.05 rf
IA
'211406
OUTPUT
07
C5
AVC BUSS R7 CI
Q3
RIO r
3
- - -4 C9 R2
--1(--41
C101
2
T2 C13
R9 ;
L2
IC13 2
IC C
`I
_J /
z
R16
liktit+V.tcs.:11
R8 4
L_1_114_4_1
C24 0
4 6 Q1
T3
Q4
2
r R22
R11
CR Q5
C14 R24 C2I
T2 T4 itiC221
R27
r
R23
r 4
isk
- I
3
R26 S2
- *cMOUNT-ED ON REAR OF BOARD 0
6V
View of Etched Wiring Board. Gray area represents etched wiring; black symbols
and lines represent components on opposite
Q7 L
INTERMEDIATE FREQUENCY: 455 KC.
O II
115
45'5 Kc,
2N409 2N410
REMOVING CHASSIS FROM CABINET
2N411 1ST IF L 2NDIF
To remove cabinet back, simply insert a small coin
into one of the slots on the bottom edge and twist. 161°".
MIXER fir 45
,f
1N295 2N406 pudA. 45-5 he
To remove chassis from cabinet, first remove the
2N412 AVC DRIVER `-7-1
knobs by pulling them off. Remove the back cover 1400,c
as instructed above. Remove the four screws at the OSC V 1N295 -
2N406
corners of the etched board. Lift entire chassis
(etched board with all components) out of the cabi- OUTPUT
net front. ( MATCHED PAII
Transistor and Alignment Locations.
9
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Admiral MODEL
Y2009
COLOR
Black
NAME
The
CHASSIS
7V1
Y2011 Gray
PUSH Comet 7V1A
AND
LIFT Y2012 Coral
MO. Y2013 White
Y2023 White The
7V1B
Y2027 Beige
Starliner
View Showing Method of Removing Battery
Holder From Chassis Board.
Y2028 Green
C4 AVC
8(1-6 R6
-won -- (Continued on
E - 0,2
/c,09,roll r 3 0 47- '. .,..1 page 11)
R111
I,...._,c5-1-- r -- 9 -- -1
R51 2 3
air
\
R12 u .-/4 I
2
CRI T
--- ---N. T2
r-
I 0
T3
- 1
1
1/
/ \---
\
syl..C.16 R L
SI
+4 11(
I i
I 000 CIA
I I
I 3 2 7
1;j11.
1
RI4
TC2 R3
Tci
- -IF\ 1 619 MI
...._442% L. 52
r
rT4 1,---11- 7
1
, _C11
VR16
F5 -`-'1w--;-,-;
,, c 8-
I
RI
F -I
ILC4 4.. ....:. - ". 0--W.,--5, BUS
I
I
4,..___R2
I CI' %I. )04
L
1
3 I
L 14
CR3/ Air -
E,
- MOUNTED ON REAR Rear View of Etched Circuit Board Used in 7V1A and 7V1B Chassis.
OF BOARD
Gray area represents etched wiring; black symbols and lines represent
4 components and connections on opposite side.
1g4;1"--1
- L_-
r-
2N411
CONVERTER
(c) 2N410
1ST IFAMP
0 2N410
END IF
1N295
DETECTOR-AVC
01 02 T2 03 T3 CR2
br
0F
09
LI,
OH' 00,0100N
Matt,. 001
00001 COM
ri
19 59
2N406 2N406 TA141 2N406
IASI AF AMP DRIVER BIAS REG. OUTP6UT
I (5,E. AT! 04 03 '4 CR3
91119
151 1110 111Ams,ro1 5.
u.
NOTES:
IF01.1.011 015, 0,0t. I 050050
.1,555 515910( S59,50 01
LAMC,IDO YCVES 1 5,050F4R0CS.
0
1195101 14,013 1 0511. 1.0,, IC 5.
500%5 ANC .0 5091 At A0,555 Im(4 1 5 1910.551111r f5
00 51550, 0000115 COITUS, 515.05.
'0'AL COMM, 00415.111 5.0510
It MOT MACE:
' IA.
I MIS
2N406
OUTPUT
5,40 4,01
07
Schematic of 7V1A and 7V1B Chassis.
10
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Admiral Chassis 7V1, 7V1A, 7V1B, Continued from page 10
ALIGNMENT PROCEDURE
a. Fresh batteries should be used. d. Use lowest output of signal generator that will
b. Set Volume control at maximum. produce adequate indication on lowest scale of
output meter. IMPORTANT: Output level should
c. Connect output meter across output trans- be held at 25 mw. or less. The voltage reading
former secondary. For best results, have at the 25 mw. level is approximately 1.8 volts
speaker disconnected, use 12 ohm load. across the 12 ohm load.
Connection of Signal Gen. Receiver Adjustment
Step Signal Generator Frequency Gang Setting Description Adjustment
Radiated Signal.
tLoop of several turns of wire, Gang fully 3rd IF 0 0 and ©
1 or place generator lead close
to receiver for adequate signal.
455 KC open
1stoutput.
2nd IF
IF
for maximum
Gang fully Oscillator g for
2 Same as "Step 1". 1620 KC open Trimmer maximum output.
3 Repeat "Step 1" several times until there is no further increase in the output.
4 Same as "Step 1". § 1400 KC
Tune in gen- Antenna p for
erator signal Trimmer maximum output.
NOTE: After completing "Step 4' the tuning range should be 535 KC to 1620 KC; ±5 KC.
If this range cannot be obtained, continue with Steps 5, 6 and 7.
5 Same as "Step 1". 535 KC
Gang fully Oscillator 0 for
closed Coil Core maximum output.
6 Repeat "Step 2"; then repeat Steps 5 and 2 several times until oscillator covers required range.
7 Repeat "Step 4".
t If signal generator does not produce sufficient output for usable reading, clip hot lead of generator to
RF stator plates terminal of gang; clip ground lead to frame of gang. Adjust ® ® and © for
usable output only. Then return to ''Step 1".
* If difficulty is experienced in obtaining signal output, first rotate IF slugs out several turns, then
slowly adjust slugs in until output is obtained. Caution: Rotating slugs too far inward will damage
ceramic capacitor contained in IF can.
§ Antenna trimmer OE should first be adjusted for maximum output with generator tuned to 1400 KC.
Then try to increase output by rocking gang or generator slightly while readjusting trimmer.
2N 410
2N410 1N295
2ND IF DETECTOR -AVC 1ST IF
03 T3 CR2
MAE
III
01.
-LC"
TO5
2500
5® re 2N410-0
2N411 IF
eA
CONVERTER2ND
1N295- 1N295
5000
J° 2N-406
'DET.
5%
DRIVER
C10
022
IOU
3 AVC 2N406
TA141
nc.660
0.0)50 Y AF AMP
.?'
BIAS REG.
.111,1,r
6V
2N406
IV (FOUR1 I/2V
CELLS)
OFF OR
CFA" " RIO) (it (NOT USED
OUTPUT
6.3
IN 7V1
( MATCHED PAIR)
2N406 -I
C14
.005 T5
CHASSIS)
OUTPUT Top View of Chassis Showing Transistor and
06
2 3/1,
Alignment Point Locations.
.11
REMOVING CHASSIS FROM CABINET
ISO
To remove cabinet back, simply insert a small coin
into one of the slots on the bottom edge and twist.
2N0OU4Tr.UT61 To remove chassis from cabinet, first remove the
5.90
I?
07 knobs by pulling them off. Remove the back cover as
instructed above. Remove the four screws at the cor-
ners of the etched board. Lift entire chassis (etched
Circuit differences of 7V1 Chassis board with all components) out of the cabinet front.
11
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ADMIRAL Chassis 7Q1, Models 742 and 743
ANT02
ENNA
.., 2N411
0 ;-i r,
2N410
T?
2N410
0 T3 X235
., 01.11102
MIXER 151a. 211c2IT. 012 IN 11.
Q1
DvEcn. 2500
MY
CI 3 4.04 3
5.6I
" 41110,11111111.13.:
ce 4
214
511.
C9
T3.611111
RtX
5.51
53900
SARI
CAI
101 CIF MIt
SNITCH
A205
CIH
a--
51
As: C5 C10 C12
15 ' -t-1 II 1-*
-T5%
155
.03 .05
610 t4 , :4 25 CI3
C3 5% 560
05
1001 CO 117.C6 :g022 110 -011 111
25 SIt
.05 430 00 2/00 T.05 1000 220 56 Ii VOLT
T.°5 5% +TIATTERIES
1-1111S-..
R2
1000
Mi
-02 2N4I2 023 [AIX
os CIL LATOR 6.32
04 5% 2N408
OUTPUT
06 1LUE
III
2N406 4" 1:.4 .1r 125
1st fir 304 + COO
Iat-", [0
0011112
C15
: 22 _
30 ..1151 226 II so
5% 12 34
Lir , 225 0 RED
100 22/ ,.,
--ovo.r-,-'-"_ 021
222 111511. 10 210
5600 III
Dn LACK
626
216 1119 -C19 rf 1021 5.12 2N408 Ir
IS' .01 1000 'OS 123 owe
5% 90 02111-0033
560
32
45510
4- GliASSIS POUND COLOR COO 1 COLOR COOLS
COMMON 060142DOT 11
T2
NATCNED PAIN
13 RED
C268 CAPACITOR VALUES IN INCIEMAES
4
-r.
UNLESS DTIERIIISE MIXES T1, T2. 513
et /11165 KADIN NAV It OY OA
,-461r--. .3 tcn
48 lc\ SLOW IIICATlyE
ALL VOLTAGES TAKEN MTN A VTVII
20(10m 115h
.4 -. 01
- 020 /.2
c,{
101
COLLECTOR
Z SOT TOM
"...f VIEW
04 I> r 'T USE° 1 TYPE (PNP )
EIMER
.2
Cfi ct 04 OSCILLATOR
:1111 11 COIL
-02 TOTAL CURRENT DIAIN WITH 10 510211
0- ANO VOLUME 001161101. SET AT 14111111UN-1 5112
455terz
1 4;
I 8 .S O
EEE1 FRONT
' 5 Itii---j .'. 2N412 1N295
rI
09
ACC
Cn 2N411 1400icc.
104=4 OSC MIXER 2N410ak
121 1ST IFw
REAR bgte.0.
C.
:,0. 5 MI
C24
n OUTPUT
\--IMATCHED PAIR
n2ND IF.
2W410
455 KC -
2N408
T3
T3 211408
IN
DRIVER DE SC)
C. DASHED LINE INDICATES ADJUSTMENT
FROM REAR ONLY
Transistor and Alignment Location:
I
View of Etched Wiring Board. Gray area represents etched wiring, black symbols
3. Remove the two nuts at the right corners of the
and lines represent components on opposite side. chassis.
4. Keeping one hand on front escutcheon, slide chas-
sis to right to remove from cabinet.
REMOVING CHASSIS FROM CABINET
NOTE: The left side of the chassis (from rear) is
1. Remove the two knobs plus the two chassis mount-
held only by two flanges on the escutcheon and the
ing screws at the bottom of the cabinet, if used. escutcheon, in some sets, is held only by the chassis
2. Unsnap back cover and remove battery case. under the flanges.
12
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ADMIRAL Chassis 8S1C used in Models 811B and 816B
UNDER-
TUNING DIAL
L2
0 01
040
FRONT CS
LI
Q5 020 6-11-R74
CR2
NOT USED
2 -I
®CR2 REAR
IN ALL
CHASSIS
Q8 034.
0 TI
52
070 Q6 CR1 T2
v. 8- BUS
NOTE DOTTED LINES INDICATE ADJUSTMENT
, "-L;
FROM REAR OF BOARD L _
R11 ICe
Transistor and Alignment Point /R20
C13 I Q3
Locations.
R20
--"%411. 15
lit Re Cl/
4-
T3I
ir.
I
la
Rear View of Etched Circuit Board, I
_
,
J
I
0
Used in 8S1C Chassis. 0
IL7511 61-7-6111 R22 2\ R29
e"
5/ T4 Q7
E'D 2N411 , Cc) 2N409 0 r2 2N409 ® 1N295 F m2 CLCCM
L.
41114X4 O MIEN r 1ST IF
02
sr 2ND
03
If sr DETECTOR *01113 '5 V
R21 ONE
,`
.."6"
1 °' CIl " tiRORT-
RATTERRLI
0.1
:11 er
112 :114
2N406 T113 5.61 3,00
5.66 AVC 5.61111r
04 115 _
.10 100
51 CFI
1710 $1154
_ ue 1.43
Cl? 15,1 z:-
RS C4 15 25 00
680 ^, 001 311 + 12V 11 woo +-7-
.05 5% ' 0.560 05 1ATTERIESI
1 -825
AI
NV, 1.111
1000
2N411 RID I00 2N406 *2N408 C26 ii.D(26,
411 N
OSCILLATOR 4,34 304 DRIVER OUTPUT
05 5% 5% 56 01 -1.1,
111E
14
I`
+ C20 LI, C25 C12
TA141
tr2,10 ,506* BIAS REC.
,045 .0031
SY CR2
015 385 14
410 NMI 1500 IIED DOT
121
1 =.V.1 5600
2 22
129 *2N408
ARON 01E,Ic. 504 13C
CZ1
- CIA A\ 52 r-ty0 1122 101If OUTPUT
116 1C14 114 c560 58 C21 .0039
156 ICI 1000 1.05
, PART + 3r
5% OF 1122I
NOTES:
11..4551C P011111 00 Calif 1,
k C4451,5 0110110 111 IWO 1411E11.1, 54141, CO201 COO 20,21 COOES
C011101 41 110401 002,10106 001 ,
KM;
41401111011 010210 E1CED FOR 2 11101111
v EN
0141SS 0111.11/51 S21C11111, P01111(5 141E1 1111 ,,,1. IAN
USE
.2111
F2 81011
T5 RED
04240.102 mats 4 NIC00141405; 117111101,001111011,ram. rtIl s
0(S/Slel 1411(5 14S, lit 1414 104. TOTAL CO21111 044 1.414.
EM
11.1.2 sT5 3 so
11.11AFCmED MR; Cif: 0+ IS 401 1144810.
4.11E4S1RFC I01055 1.111ENT.
13
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Admiral
0 T2
MODELS 751 757
CHASSIS 8V1
0 T3
2N4I2 2N4I1 2N410
IF IMP N1XER iStot
L3 02
°' -ery
C4
410
-.AAA,- 005 Ale
CII
61 3900
11113400
OFF Olt
oC" RI SNITCH
CII SI
--1
C9
220
CII CIS
III
AI P-4 I1
360 II .05 .05 DS .35 00 SIX
05
5%
680
_CT :04 CIO RIO _LCI1 III 1111
Ci6 iiVOL
25 120
__5%560 5%
.05 130 <2203 2700 1.05 1000 220 + IV 1211
129
129
5111211E51
:1-.05 5%
1-105
160 IDS-% e.6;)
12
t 16104(0 PAIN
1000 -05
".".05
2N412 \\ R22 * L26 121_4311'
441
0501156104 1.31
,f 45 AC 05 .
-4, 45% 2N4081 -
Cm 551 GROUND 1Y
OUTPUT
'SY
CONNOR GROUND 4 07
IESISTCRS I/2 wet 10%.
CAPACITot VALUES IN NICROFARADS
R23 2N406 141 CDI
120 101 SPIN
5% uC C75 -
UNLESS OTNERNISE SPECIFIED 155 06_15 139 13011 R26 p. 1I
#014,5 READING NAV RE ON OR 5% MeV
SLIVITI3 NECATITE
20%
.0,..,,,,. R27 10 RED
ALL vOLTACES TAIEN N1114 A VENN
COO
1,0
ITO
14041 5 -.---..
100
1500
0- -ANN--
129 YI11
10
OF
RIO
/1Y
ti
82 210
COLOR CODE COLOR CODES
001 0 RANGE 5 1011011
5600
It
6 f, T2 DR3v8 1 vIEN on.
73 RED 426
1021 021 C22 2*N408i 11
158 C24
TI T2, 81-3 1:01 COO .05 425
5%
111014 riEW GREEN 001
05C0.14101 90
560 "21 LTi-010039
COIL
COLLECTOR
vy.E IPNPI
(NI''ER
-,--
P4
i.
ICTAL ORIENT DRAIN WITH NC S:CNAL
a AND VOLUME CONTROL SET AT 44iNtllyM C MA
.0°
4 ..!"t 5
Q2 VOLTAGE DATA
E.- 1.0
- I Q5 Voltages shown measured with no
signal, using fresh batteries.
_034
E
tiy _39 Volume control at minimum; dial
set at low frequency end.
I CI >. v.-
All readings made with VTVM
_14 between transistor terminals and
B plus (ground).
Si (nu n '
(U) 455 KG.
L
2
r
_ 2N412 FRONT
21411
+, OSC
MIXER
14-00 Kc.
Q4 2N 410 142_0 kc.
E. 1ST !Fly
2N 412 REAR
RF0
2N410 O
(Th OUTPUT 0110
\--IMATCHED PAIR 455 KC.
2N408.1
2006
2N4011er r -N 1_14a
`®DRIIR
I \-10E1 Eal
DASHED LINE INDICATES ADJUSTMENT
View of Etched Wir ng Board. Gray area represents FROM REAR ONLY
etched wiring, black symbols and lines rep components on Transistor and Alignment Locations.
opposite side.
REMOVING CHASSIS FROM CABINET
4. Keeping one hand on front escutcheon, slide chas-
sis to right to remove from cabinet.
1. Remove the two knobs plus the two chassis mount-
ing screws at the bottom of the cabinet, if used. NOTE: The left side of the chassis (from rear) is
2. Unsnap back cover and remove battery case. held only by two flanges on the escutcheon and the
3. Remove the two nuts at the right corners of the escutcheon, in some sets, is held only by the chassis
chassis. under the flanges.
14
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Admiral Chassis 8T1, Models 711 and 717. Chassis 8T 1A used in
Models Y821 and Y822 is electrically the same plus clock.
11295
2N412 2N411 TIAj2 2N409 4 , 7 3
2N410 A 13 VOLUME
OALIR RE IMP MIXER _L 2 1ST IF :1: MIT CR1
T.05
L14 III
ANTENNA 01 02 T 211 03 -se I" 04 :DETECTS
E 367 L3- - CS 5.61 511 .1Y
IY
.L4005, 3
015* 19 C13
IRIS
410
1300 3000
Iv 5%,
3900
2014 821
R3 C4)1.05 CIO .05
220 61(.os 00
220 C5 -r1...ev- OFF -01
Re RI IN RII RIO( Icii 412 C 24
40
431 430 500 INK 2700 .05 410 120 T 10 SWITC/I
31, IV SI,
CI 57, 514
111/7--Q4,o-e
6-11/5-. -S.6Y
05 IV FOUR
12
BYO /OS 1 1/21
,n.nnos 11 -CELLS
1000
re, COTTON 2N412 42N406 T-14 .°1
VIEW
OSCILLATOR 1.4 OUTPUT Re
'111 L2 05 (f) 2N406 -s.fr
OSCILLATOR -11Y DRIVER 1 CI III
GREEN 001 020
COIL
L2
06 COO
1.0
3V
3 126 OY.
IF 455 IC 5
COMMON GROUND OW 100
* 4.1%.6Y
MATCHED PAIR
ALL VOLTAGES TAKEN WITH VTVM. y' 1121
2400
123
22K
122r
5400
UNLESS OTHERWISE SPECIFIED III
RIR 820
208
5.,,
CAPACITOR VALJES IN MICROFARADS 270 500 -CIS
ALL RESISTORS 184 MATTA*. 5%
-.05 .01
1124 1125
TOTAL COUNT MO SiCIIALI 1.111A
jell CII g 2330 3900
t ROOTED ON REAR OF BOARD l I
'2N406
OUTPUT
05
C5 Q3 C6(--01
AVC BUST gs-CF-6 R7 C
4111-AAN--111
CTVQ4 .R10
t
C9
Cigi_ R20
C16
i's 3
44--WV-40 14-1(-41 Ci8
Le I R6 r-- 5 -K--
R12
F214
' T2
2 Lt.
ce
...7,7spea t"T __I
2
L 6
CI7
C12 t f ' R4
110---g-- R16
41 Ti
R113
24 C15A
I_ _I_ _4_
14 Q2
SI
Q5
T3
13 2
R15 R11
111 -"AN---- MI
0-01-
CRS Q6
R22 C3
Q.1
11:
CODE DOT
14 -GRIT
r
L,(,
f r2 T4 IT C22
:4 iS 31,
)
C44 R24
J
O 14: R27
C21
8- BUS /
R21
R3 R5 & L3
C2
R1
-COLLECTOR
COTTON VIEW
r3 -BROWN
RED
IASE TYPE (PRP) DOT
ta 7 C2-5-9 751 (11111E4 EMITTER COLLECTOR
R26 Or-
14 250.-AN'l 4'--5
, 3 , 2
6V *MOUNTED ON REAR OF BOARD
NASA
PNP TYPE TRANSISTOR
View of Etched Wiring Board. Gray area represents etched wiring; black symbols
C26 I4,°_ ,__14,
and lines represent components on opposite side.
Q8 525 Kc0 0455 ti
111111111 111111111111
REMOVING CHASSIS FROM CABINET 2N409 2N410
To remove cabinet back, simply insert a small coin
into one of the slots on the bottom edge and twist. 1620K,
0 0 2N411*
MIXER
1ST IF 2NDIF
To remove chassis from cabinet, first remove the 2N412 1,41 455 KC.
knobs by pulling them off. Remove the back cover OSC .4V0E6R
as instructed above. Remove the four screws at the 14°1:"(e' 2N412 1N295
corners of the etched board. Lift entire chassis RF
2N406 GET -1(
(etched board with all components) out of the cabi-
OUTPUT
net front. MATCHED PAIR
Transistors and Alignment Locations.
15
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Admiral CHASSIS 2E1 2E1A
50EH5
LEFT CHANNEL
OUTPUT
VI
R5 ,334
7
T1 M7
MODELS 925 929 938 LOUDNESS
2-5
RECORD CHANGER NO. *2400-001-013 Rt
r -1
1NEC
R6
HITE
It .14
M3
RED g.
C20
21:IMF .150V
BLACK R3 M8
1 NEC T2 RED DOT
r
LOUDNESS M9
Agg .AAA., 2-5
117.330
M5
50EH5
RIGHT CHANNEL
CI
OUTPUT L
V2
AC INPUT CIRCUIT FOR 2E1 CHASSIS
/7777 .047/1'
RI RECTIFIER RN R9
M3 BLACK
M2
47 2200 WHITE
24 RED ENO M1 RED
02A C2B CC PHONO
GREEN
130 60/1F 404F 2011F SINGLE PLAY TYPE M4
I/O VOLTS, CO 11,417S 411 150V 150V 15011 ....11 YORE ARM
CO CfCLES 45,9110 ASSEMBLY
PARTS LIST
Sym
RESISTORS AND CONTROLS
Description Part No. Sym
MISCELLANEOUS PARTS
Description Part No.
17H70-1 M5
M6
RI 130 ohms. 4 watts 61B 20-34 01-04710
CR1 Rectifier. Silicon Diode
R2 1 megohm. Loudness control
left channel in 2E1 and
2EIA chassis 75D 1-127
Ml
200 ma)
Phono, 3 Speed, Motor and
Turntable Assembly
93B 16-1
h i/
R3 1 megohm, Loudness control ( less Tone Arm) 400D 710-1 M2 TO JCI.Of
right channel in 2E1 chassis 13/1V
R4
(incl. SI)
right channel in 2E1A
chassis
47 ohms. 2 watts
75D 1-128
75D 1-127
60B 21-470
M2
M3
PC Line Cord and Plug
Cartridge. Dual Needle Type
(includes needles)
Needle Assembly for above
cartridge
8913 1-1
409C 37-I -tn
ill YOU'S JO PIUS
t/370,4S
7- 0OfF /7F I/
70 COMMON
00010.
R5 33.000 ohms. watt........__60B 8-333 sapphire. .7 mil needle 98C 95-4 60 CYCLES, AC war
R6 82 ohms. 1 watt 60B 14-820 sapphire. 3 'nil needle 98C 95-5
R7 33,000 ohms. 1,1, watt 60B 8-333 M4 Tone Arm Assembly, complete
R8 100 ohms. 1 watt 60B 14-101 with cartridge and needles
R9 2.200 ohms. watt 60B 8-222 models 925 and 929 400C 707-1
Model 938 See Service Manual M8 Speaker
CAPACITORS No. 5800 Rev. 1 4" PM. all models except
Tone Arm Rest model 938 78C 160-1
Cl .047 mf. 400 volts 64B 8-28 all models except model 938 401A 468 5" PM, model 938 78C 161-1
C2A 60 mf, 150 volts M9 Socket, right channel speaker
C2B 40 mf. 150 volt= electrolytic M5 Loc-plug. AC Line (does not
C2C 20 mf, 150 volts 67B 42-1 include connector pins) 33B 287-2 connector 88B 11-3
C2D 20 mf. 150 volts. pin for above plug 9B 35-12 MOO 12 foot length, Twin Speaker
M6 Loc-socket. AC Line (does not Cable and Plug 89B 92-2
include connector pins) 33B 287-1 CABINET PARTS
TRANSFORMERS pin for above socket 9B 35-12 Cabinet
Ti Transformer. Output 79D 88-1 M7 Speaker model 925 (Coral and Silver)
T2 Transformer, Output 79D 88-1 4" PM. all models except 35E 550-1
model 938 78C 160-1 model 929 (Blue and White) 35E 550-2
5" PM. model 938 78C 161-1 model 938 (Blue and Aqua) 35E 551-1
ADMIRAL Chassis 1F used in Models 329 and Y949
CRAY-. CI .01
25L6GT CHASSIS AND CHANGER REMOVAL
AMPL FIER
VOLUME BLUE
RI
L5 NEC
The amplifier tube may be reached for servicing
-- .5n 5/
by removing three screws that secure the metal
,:1MASSISI
/15Y 4
GROUND
N3
grille to the top front edge of changer compartment
SELENIUM and lifting the grille up, out of the way.
rmi
RECTIFIER
65 NA
47 Tube socket voltages may be measured by using
an octal "cheater" socket. If further servicing is
RUN CHANGES
0 Part of prod. trt necessary, remove the six Phillips screws that
L_ OR3 was (004. Changed to hntlf hold the motor board. Remove the control knobs
25160T plots current.
REJ-ON-OFF and the 3/8" hex nuts that hold the controls to the
Ill VOLTS
60 CYCLES ONLY
NOTES -
ALL RESISTOR VALUES IN OHMS AND CAPACITORS
cabinet.
CHASSIS GROUND
45 WATTS
CONNOR GROUND
VALUES IN MICROfARADS UNLESS OTHERWISE
SHOWN. ALL VOLTAGES TAKEN WITH A VACUUM
Lift the changer up and turn the chassis over
TUBE VOLTMETER. for servicing circuit components.
16
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
CHASSIS 4L2 4L2A
Admiral 12AU6
MODELS 4L20A
12AV6
4L25 4L25A
4L21 4L21A
4L26
4L24
4L26A
5005
4L24A
4L28 4L28A
Mt
CONVERTER
(1) Ti
, t
DETECTOR
SSv
OUTPUT
//SY
E
VI g2y V2 V3
LOOP
23A :a re, 71i ;
C 9 T2
AMNIA
5
- *i8/ -35: DI
240.
C3
35T 4: 9Y
OY
M
32
CIA
3 ssr 31- - - - 2 2200
1-5 SSY
LI 1Y R3
C11 88 I 6Y
0
._44( MEG CS
47011
145
C2
22 2200 -C6 V17011
150 220
OUTSIDE
TURN Of NF L2 3 R4
LOOP
:1 2 1."Airrff---.
VOLUME
3; A
2
9SY
N-0~ R7
VOLUMt CONTROL 3300
CIB 4: fi MOUNTING BRACKET 1W
1 CNBl
J30
RI
CI
2.2 eA ME
NEC CRC
BROWN
SOME
DOT
L2
<3,11113.
INTERLOCK CONNECTORS MI AND M! 35W4 047 MI
NC 6 7 NOT USER II SETS OWN MOOR RECTIFIER
NUMBERS ENDING WITH 'N V4 7 IV /1.4Y
4
2
4 3
T1 M2 M3 ALL VOLTAGES WEI //TM
A -J I1YAC 14YAC 79 VAC A VACUUM ILLIE VOLTMETER
117 row. 60 CYCLES.
AC OR OC (.40 WATTS)
0000
12AV6 12AU6
33
2W
0
5005
2
I' IN SOME CHASSIS
CI1 IS TRIMMER ON CI WC
All readings made between tube socket terminals z ASS IC
and common ground. - COMMON GROUND
Dial turned to low frequency end; volume con - - CHASSIS MVO
trol at minimum.
RED
+ EARL,' PROD. ( PART Of CIA )
Cl2IATER PROD. ( NTO. ON CABINET BACK)
BLUE
LI
T1/' \000
OV 1 0
0 0
OV30
a
O
.0
V
I+ 8A /er 3 R8 000 a
'GE
Y.
0,
a
ao
-.2 O O
ro e'4 0
C8C
U
0 s
/
0
*X C4' 0----=40 a .0 I-,
R4
VOLUME; s' 0--- 000 I
0V2 0 -r-7
0°0
0 V4 0
CI0 0
0
.0 0 00 t
s.
C
'72
C5 4'.
C6 -3 to 'E
R2 E
o
-
.4 0
(CHASSIS 412, lad (PART OF R11
7.1
OWASSIS 4C,4411,4 ( PART Of N41
Cti
Sto 0 0 JD 0 0
LI .0 5 -0 0
Rear View of Etched Wiring Board. Gray area represents etched wiring;
1-1
black symbols and lines ,epresent components on opposite side. 7.6 9 VI c 2" c.
17
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ARVIN Industries Model 1586, Chassis 1.46500
TUNER PHONO
INPUT INPUT R12
4700 4 5_
f
R2 240 R13 T2
V RI5 470K R6 100K
BASS G8 J1
I MEG
RI6 RI7 VIA C4 2.2 MEG V2 CONT. .05 *11 2 3
470K 470 6AQ5 SIDE VIEW
470K
/27199 II
012 2 5
FLAT LP 20V 47
00CC 1.024.,f 3V
R8
TUNER RIAA ii 470K 1-7
BROWN T 5.S-1 Al
CY _1-J1 6.4
SW -3 05
22,uf
a
RI 0.6 V r -1 EXTERNAL
3 MEG RIO
VOL R
180 SPEAKER
FUNCTION- SWITCH 03N T' 750
' TREB. 2W L -,J TERMINAL
_L C 10%
CONT.
T3'1
.33
SW -2
'PHASING -
DOT
2.5V
R4 R7
4700 68 K
10 % R11
V 9 R9 1
I -7 2200
I ME
VIB
1/27199 50V V3
I
II 6AQ5
R5 C7
470K .0047 C9 B
40.4f (1,713-. CHASSIS
300 110EXTERNAL CONNECTIONS TO PRINTED BOARD.
I VOLTAGES MEASURED WITH V.T.V.M.
RESISTANCES MEASURED IN OHMS; K1,000'
MEG, 1,000, 000.
RESISTANCES TOLERANCES IS 20% UNLESS OTHER-
V4 WISE INDICATED.
TI 66W4 CAPACITANCE VALUES LESS THAN ONE (1)ARE IN
C9A MICROFARADS I.F),AND VALUES OF ONE (II OR
9
260 V
50
3001
GREATER ARE IN MIGROMICROFARADES
SWITCH -1 72 MA r...r 0 UNLESS OTHERWISE INDICATED.
NTER OFF -ON
A CAUTION-. WHEN REPLACING T2 CONNECT AS
LOCK INDICATED FOR CORRECT OPERATION OF
6S6R FEEDBACK.
PILOT 6.3 V 2.25A CAUTION' THIS AMPLIFIER IS SET UP SUCH,THAT
LIGHT El 4 5 WHEN A--1- VOLTAGE IS APPLIED TO THE MAO
INPUT THE SPEAKERS MOVE AWAY FROM THE
L.__ J SPEAKER BASKET SO THAT SPEAKERS ARE IN
ID 3
3 4 4 PHASE WITH COMPANION STERO UNIT. WHEN
6405 6405 6BW4 719 9 REPLACING SPEAKERS OR ANY OTHER PART OF
THE CIRCUIT DO NOT ALTER THIS.
FUNCTION
OFF -ON BASS TREBLE SWITCH VOLUME
PILOT -
LIGHT
R13 R3 6S6R
SW- I
INTER-
LOCK SW. -3
®® EMI @
EXTERNAL SW. -2 PHONO- TUNER -
SPEAKER INPUT INPUT
SPEAKERS
S-1 _ P.M. Type
5" x 7" 6.4 ohms voice coil
S-2 ____ 4" P.M. Type _ 6.4 ohms voice coil
Impedance for external speaker 6.4 ohms.
18
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
we
CI
a
-0.96V
I.F. TRANS.
I KITTON
5
rrtn -METAL CHASSIS FRAME
s//
2y
LI
a OSC COILS
R.F.CUL
VIES)
128116
/
,.
`pp
.
/
in)
185 1
j-#
'
ARVIN Industries Model 3582, Chassis 1.44700
Ti
4 I A6 I
GIG
4.8
Q
PI
5 L __J 1
-7V
a_ 1
401
R1
22K
0 -AA.,-
Ei
L2
i
: 2
I 2BE6
y AmEn
IA41,
,,,Tte
1 ZAV6
3
4
T2
11
12AV6 12886 125E6 12886
RH%
4
831
- C3
R
,1
.05
.
R2
2.2
MEG
4
5
4
ma
I2BA6
CDI-6-
PHONO
SWITCH
IA
51K
RADIO
PHONO
JACK
MP,
:
2
,,,a.1
" I 31606
25F5
1
CII
4
4
3
..
R3
47K
.4040
25F5
7
R5
270
OUTR/r
1A
.,
i
_I
,
;,I50
VOLUME
V'
C4
-,
C5
180
CONTROL
R4
/2 MEG
C6
.0047
7
12AV6
41V
1..
I\RAEF.
6.811E6
470
47K
A 47
0
6
-
80v
PC -I
'
68K
330K
F
.01
k10
25F5
9
-1
5
_I
25F5
7 102 V
612
100
IV/
7 102V
TONE
CON
C7
I
RED
S
tI7
SPEAKERS
T4
C12
2.2 MED
-1
.1
.0, -e- /
5 -EXTERNAL CONNECTXINS TO PRINTED BOARD 5, Rii
300
VOLTAGE MEASURED TO B- WITH A V. T. V. M. ..! 20k , NO SIGNAL. GREEN
RESISTANCE VALUES ARE IN OHMS K 1000 , MEG 1,000,000 CAPACITANCE VALUES LESS 4 96 V CA 8
THAN (II ARE IN MICROFARADS (uf ) AND VALUES OF OR GREATER ARE IN , 1 1
I
MICRONIcRoFAFACS (.....f I , UNLESS OTHERWISE INDICATED. 12 AV6 680 330
APPROXIMATE SENSITIVITIES V 00 L c88
CIRCUIT DUMMY 'NPUT 1 -OR .05 WATT OUTPUT INPUT FOR .5 WATT OUTPUT
POINT TO GENERATOR (0.57 VOLTS AcROV, v CI (1.78 VOLTS ACROSS VC I AUXILIARY
I .05uf AT 455 KC 2800 . V 6 300.,/ OUTLET ,,, 47
P L IOW FUSING
2 .05..! AT 455 KG 80 A, V 20(,..V
120._ R7
_
AC -DC
3 °S.,. AT 1000 40 A. U 100,V - L./ C9 /-
4 (STANDARD U:OP AT KCCKC 70 u V V
SW -3 ,N?ER LOCK ' OFF -ON
111
11;01
RIO
'-'.- I±1
-4=1- v TION
SPEAKERS
0
R5 II) FOTCH
Wan Type: Permanent Magnet
WWI.
R3 6 7..._71 II R15
Size: 5" x 7" and 4"
41111114P
A y 12AV6 12AV6 0 cg CO 41, Voice Coil: 6.4 ohm
Li
I2BA6 V li \---/ \,"----460 11
POWER SUPPLY
\ R7 0
A7L
CI \,_,./
'ff' iC4 0
R2
ill A
REt
i_ REG7 105-120 Volts, AC -DC, 45 watts
A5 A6
03
0 I
I
PG I
- (------\
\......1
1---",\
25F5 j.
412
POWER OUTPUT
2.2 watts
...---N /Th
25F5
RID
T
Undistorted
12BE6
\---I
72 12BAS
\.__/ \____I C7 RI4
Maximum 3.0 watts
TI -A 4 A1 iA2 ALIGNMENT PROCEDURE
Position Frequency Generator Trimmers Adjusted Functions
of of Dummy Output in order Shown for of
Variable Generator Antenna Connection Maximum Output Trimmer
Open 455 .05 p.f Pin 7 12BE6 A 1 , A2, A3, A4 I. F.
Open 1670 * Test Loop A5 Oscillator
1400 1400 * Test Loop A6, A7 R.F. , Ant.
600 600 * Test Loop Check Point
* Standard Hazeltine Test Loop Model 1150 or 3 turns of wire about 6" in diameter
placed about one foot from the set loop.
The alignment procedure should be repeated in the original order for greatest ac-
curacy. Always keep the output from the signal generator at its lowest possible
value to make the AVC action of the receiver ineffective.
19
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ARVIN Industries Model 7595, Chassis 1.47200
LI
2N1086
TR I
[ A4
L2
1
2N448
TR2
SI
I
I - 1211
72
I
I
2NI69 OR
2N449
TR3
A I AI
T3
I
1
2N323 OR
2 N 1097
TR4
c,
.01
0.2V
A I
13
1
c G8
.05 =
R II
C5
-
-
4 5000
2 02 /.02 026.02
R2
10K *31 C18
3
47V ri 5 OV
5.3V
-
08V
R7
1.3V 2700 R8
470
R3 R5 RI 2
1500 27K 1.0V 100
RI
- RIO -
27/< 2200
\ 0.3V
nn R13 RI4
47
R4 R6
R9
220 12 K
820
6.0 V \
-"\11 RI5 C7
/ SW.
100 I. OA!
+ + 4 -'CS SIZE
SIGNAL
TEST
,.POINT
TEST
FREQUENCY
SERIES
CAPACITY
INPUT FOR 5MW
OUTPUT (0.25 V
TO GENERATOR ACADSS 12 OHMS)
OSC. COIL F TRANS
( 3 ,COLOR
)25
I
-I
C10
80/ 80 / 8auf
mom
FLASHLIGHT
BATTERIE S
-L-
',-7:713 DOT
1
455 KC .05,u, 3500. V
trz;) RESISTANCE VALUES ARE IN OHMS; K I000
2 455 KC 05...0 200µV 164
3 11) s EXTERNAL CONNECTIONS TO PRINTED
CIRCUIT.
3 455 KC .05,ta 8,A., V
CAF-AGITANCE VALUES LESS THAN 1.0 ARE IN
Bf.SE COLLECTOR M IGROFAR ADS ) AND VALUES GREATER
4
STANDARDLOOP THAN 1.0 ARE IN MICRO- MIGROFAR ADS (µ,a)
1000 KC 500,, V /M . 04, - EXCEPT WHERE NOTED.
8
VOLTAGE READINGS TO COMMON GROUND ARE
TRANSISTOR MEASURED WITH VACUUM TUBE VOLTMETER
EMITTER
TRI, TR2 TR3 UNDER NO SIGNAL CONDITIONS WITH TUNING
TRANSISTOR TR4
CAPACITOR CLOSED AND VOLUME CONTROL
(BOTTOM VIEWS) AT MAXI MUM CLOCK WISE ROTATION.
I-
4
0 ALIGNMENT PROCEDURE
cr
Output meter connected across voice
coil. Generator ground to common
ground. Generator modulation 30%
at 400 cycles. Volume control in
VOLUME
CONT ROL fully clockwise position.
Position Trimmers Adj. Function
of Generator Dummy Generator in order shown of
V ariable Frequency Antenna Connections for Max. Output Trimme r
Open 455 Kc .05 p.f CIA Al (Top of T8) I. F.
A2 (Top of T2) I. F.
A3 (Top of T1) I. F.
Open *Test Loop
1670 Kc A5 Oscillator
1400 Kc *Test Loop
1400 Kc A6 Antenna
600 Kc 600 Kc*Test Loop Check Point
*Standard Hazeltine Test Loop Model 1150 or 3 turns of wire about 6" in diameter
placed about one foot from the set loop.
20
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ARVIN Industries Model 2598, Chassis 1.47900
G
cn
-- [70
2N1059.
Tk5 90V
2 SPEAKERS %AVG
2N233t, 2N 233A ,4 6 63v 47V
2N194A n2
TRI 829 TR2 TR3
B
TI
/1 RI
--:71377 \\ eY'
CUO
tE13
5 Ri2 6 10.37'/
0.270
RS
500 SIZE
000
a31v
4 - t' 19295
FLASHLIGHT
BATTERIES
1-0 R8
066 3900
.04 0613 R7
D2 470
R6 PIO
470 10.1' R5
56K C
A
046V Y
8
8.5V
RESISTANCE VALUES ARE ,N OHMS. K 1000 0 EXTERNAL CONNECTIONS TO PRINTED CIRCUIT.
CAPACITANCE VALUES LESS THAN 1.0 ARE IN MICROFARACS (.4f ), ANC VALJES GREATER THAN 1.0
ARE IN MICRO - MIGROFARALIS (...11) EXCEPT WHERE NOTEC. _ _ 5 6 Z - 2._ 9 _
VOL T METL R 05119 470
VOLTAGE READINGS TO COMMON 'ROUND ARE MEASURED WITH VACUUM TUBE
NO SIGNAL COND,T.ONS WITH T1 N.NG CAPACITOR CLOSED ANC /O_UME CONTROL AT MAXIMUM
-M4,/r 10
3900 220
4700 68K VN M\A.X.-VV-4
CLOCKWISE ROTATION. tiA
220 6800 47K
NO SIGNAL BATTERY CURRENT 7 MA TO 10 MA 220
PCI
J
0 L
R7 G9
CIO 2N2334 0 BASE 2 5 3
2N 233A C8 R6
IN 295
miummumoutat _ R5
COLLECTOR EMITTER
C14 T3 T2 TRANSISTOR 64
c=, 0I 0 TI
I.F
I
TRANSFORMER
I A I 2.10 GIB fiiR2 ( BOTT0A VIE/IS SHOWNI
R8 0
r -C 6 4 Y [1C2
CPI Cl2 INPUT FUR
RI I c= CIA U1 SIGNAL I TEST SERIF'S
-APAG.TOR
1
50M W OUTPUT
TEST POINT EREOUENCY _ C GENERATOR 11.27 V. ACROSS 32n)
R4(:1 r
455 KC .0541 3000 w v
SI A -El 13,t 3 2
I
455K0 .05.91 80 wV
R9 2N306 2N1059 5 2NI 94A i 455 VC 05 wf 6 At v
TUNING 4 15 4 1000 KC
STANDAR
L
250 My/7n
VOLUME
ON -OFF
ALIGNMENT PROCEDURE
Output meter reading to indicate 50 milliwatts 1 .2 7V
Output meter connection Across speaker voice coils
Connection of generator ground lead Common Ground
Generator Modulation 30% 400 cycles
Position of volume control Fully clockwise
Position Trimmers Adj. Function
of Generator Dummy Generator in order shown of
Variable Frequency Antenna Connections for Max. Output Trimmer
Open 455 Kc .05 p.f C113. Al (Top of T3) I. F.
A2 (Top of T2) I. F.
A3 (Top of T1) ) I.F.
Open 1670 Kc *Test Loop A4 Oscillator
1400 Kc 1400 Kc *Test Loop A6 Antenna
600 Kc 600 Kc *Test Loop Check Point
*Standard Hazeltine Test Loop Model 1150 or 3 turns of wire about 6" in diameter
placed about one foot from the set loop.
21
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ARVIN Industries Model 9594, Chassis 1.47500 TR5
2N 1101
TR I TR2 TR 3 TR 4
2N1 94A 2N233A 2N233A 2N1251
SPK.
IA3 lAl I
4 3 5 2V
C6 C9
3.6 3.6_ I R22
02
470
I= o 15
1.0 5.6
c° 3V
og
I
4 P 1Q5 023V RII
1_,__ J 2200 CI4
I CIO 3 0.18 V 2
C3
1
C7
R5 CII
AI 31\ 02 330 RI JACK
- 1
(A4 I
Re
IN
RI2
1800 R23
ICIO 295 16
1 1
.32V 220 .026'2 330 RI9<5.6
1 .85V 0.9V .35V 120
R3 I3 TR6
14R700 2N1101
R2 3300 1
3900 =
R4 R6
C4 47K 278 C8 RI 4 1
R9 1+.1.]+1. 68K \
RI
.02 1 71 C3
- I0,u f 2200
R7
.02
220 - CI3
1
I8K RI5
= A, 8 H
220 BOA," 4 -SIZ E AA' PENLIGHT
5.3V
I /
/ BATTERIES
CAPACITANCE VALUES LESS THAN 1.0 ARE IN V
BASE
MICROFARADS (./f), AND VALUES GREATER THAN L
1.0 ARE IN MICRO-MICROFARADS EXCEPT
WHERE NOTED. COLLECTOR EMITTER
SIGNAL TEST SERIES INPUT FOR
VOLTAGE READINGS TO COMMON GROUND ARE TRANSISTOR CAPACITOR 5MW OUTPUT
TEST POINTS FREQUENCY TO GENERATOR (47V ACROSS 4541)
MEASURED WITH VACUUM TUBE VOLTMETER
UNDER NO SIGNAL CONDITIONS WITH TUNING
CAPACITOR CLOSED AND VOLUME CONTROL AT
MAXIMUM CLOCKWISE ROTATION. 253
000
0 455KC .05µf 1500AV
RESISTANCE VALUES ARE IN OHMS, K 1000.
4 2 i it, .
0 455KC .05Ads 604/ V
COMMON GROUND SYMBOL
O EXTERNAL CONNECTION TO PRINTED CIRCUIT. OSCILLATOR
/ I
COLOR DOT
4 0 455KC .05ASI 10,..V
TOTAL BATTERY CURRENT DRAIN UNDER NO
SIGNAL CONDITIONS, 7 TO II MA.
COIL
(BOTTOM VIEWS)
I.F. TRANSFORMER
0 1000KC STANDARD
LOOP 350,..V/M
(i)
2N1251 2N194A VOLUME CONTROL
LI
R14 C2A L C3
I
c=
RI2 0 RI OR3 L2
0°R13
_0 V0,0 RIb SW
11
IA3I 821/\
TITI
C4 0 CII
ALIGNMENT PROCEDURE
SPEAKER
0R4
Output meter connected across voice
CIA
CIO IN295
r C
41.11k -2N2334
^0R51-1;° (DE R6 R9(A4I coil. Generator ground lead connected
'Cr-C, 00 .C7C, AI
73
C6
'2R00 C9 1.ID
to common ground. Generator modu-
R7
lation 30%, 400 cycles. Position of
TUNING
CONDENSER
2N 23 3A
volume and tone controls maximum
clockwise.
Position Trimmers Adj. Function
of Generator Dummy Generator in order shown of
Variable Frequency Antenna. Connections for Max. Output Trimmer
Open 455 Kc .05 ilf CIA Al (Top of T3) I. F.
AZ (Top of T2) I. F.
A3 (Top of T1) I. F.
Open 1670 Kc *Test Loop A4 Oscillator
1400 Kc 1400 Kc *Test Loop A6 Antenna
600 Kc 600 Kc *Test Loop Check Point
*Standard Hazeltine Test Loop Model 1150 or 3 turns of wire about 6" in diameter
placed about one foot from the set loop.
22
[VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ARVIN Industries Model 9595, Chassis 1.47600
2NI 101
cg
16 16 .01 2N1101
Ei 2N 194A 2N233A AI T4
2N233A ray 2N1101
5.0V 4 2V 56VI E 1/1 37V C14
I 4,TI
470
CIO 4 T321
(c.
100
R9
C7
C3
680
470- I
1
t: 2NI 101
96V 1
36V 22V
3 CI 20V
95V 1"" I" 21
I
-
_J
I
2
L3__ _J C54 C58
.02 .02 C8A C88 IN2 95
C18 0-1 .34V 02 02
4 [- R8
RIO
L2 CIA
R2
C41j'i
10Agf 330 800 - 6 V.
SPEAKER'
45 avC
C2 -
02
0-- / Rim
3300 IN2 95
R3
271(
R4
R5
220
2.2K 3
3 4 5
-7. - 8-.- 9-on *v
47K 3.3K 68K 100 .
.
JACK
.A.4--1
39K 3.38
.005
02 2200
NC
\./Se
56K
R6
4.7K
4 7K );47K
100ONse
1800
-moo
_
r 4.
RI ,-
1 1
2200 CP-I 4 -C`SIZE
1
I8K L -.1100 BATTERIES
CP2 j 6V
RESISTANCE VALUES ARE IN OHMS; K.I000. C154 015E1
CAPACITANCE VALUES LESS THAN 1.0 ARE IN MICROFARADSLAf/. 8041 80.uf
A 6 I CIB TOP /3 VALUES GREATER THAN 1.0 ARE IN MICRO-MICROFARADSG44444{) 7T-
EXCEPT WHERE NOTE:.
A4 C I A BOTTDM VOLTAGE READINGS TO COMMON GROUND ARE MEASURED WITH
2N 1101 VACUUM TUBE VOLTMETER UNDER NO SIGNAL CONDITIONS
WITH TUNING CAPACITOR CLOSED B VOLUME CONTROL AT 3
MAXIMUM CLOCKWISE ROTATION.
_L= COMMON GROUND SYMBOL.
O 4 3 5 4
CI RI EXTERNAL CONNECTION TO PRINTED CIRCUIT.
R8
I.F. TRANSFORMER BASE
C5A, B ( BOTTOM VIEWS)
TEST SERIES INPUT FOR
C8A,B SIGNAL 5
CAPACITOR 5 M W OUTPUT
2N1101/2N233A R5
TEST POINT FREQUENCY TO GENERATOR(.475
V ACROSS 4511).
2NI94 A ( CP
2N233A I 455 KC .054f 900 AtV
C2 R2 3
A5 L2 CII 2 455 KG .05.447. 30 Ai V OSCILLATOR
4='C6 R4 COIL
RI BASE
1 N2 9 0.-IN295 3 455 KC 40'
.0540{ 5 At I,
COLLECTOREMITTER
4 1000 KC 200 ,u Y/ rn TRANSISTOR
C3 C7 LOOP
A2
ALIGNMENT PROCEDURE
Output meter reading to indicate 5 milliwatts 475V
Output meter connection Across speaker voice coil
Connection of generator ground lead Common Ground
Generator Modulation .. 30% 400 Cycles
Position of volume control Fully Clockwise
Position Trimmers Adj, Function
of Generator Dummy Generator in order shown of
Variable Frequency Antenna Connections for Max. Output T rimme r
Open 455 Kc .05 C1B Al (Top of T3) I. F.
A2 (Top of T2) I. F.
A3 (Top of Ti) I. F.
Open *Test Loop
1670 Kc A4 Oscillator
1400 Kc *Test Loop
1400 Kc A6 Antenna
600 Kc *Test Loop
600 Kc Check Point
*Standard Hazeltine Test Loop Model 1150 or 3 turns of wire about 6" in diameter
placed about one foot from the set loop.
The alignment procedure should be repeated in the original order for greatest ac-
curacy. Always keep the output from the signal generator at its lowest possible value
to make the AVC action of the receiver ineffective.
23
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ARVIN Industries Model 5591, Chassis 1.46700. Model 5592, Chassis 1.46800,
is electrically the same as data on this page except for clock connections.
Aa I T2 rA31 32] 7
32ET5 I- 01
c4
r
.4( 3 T4
CA 1130.3
PRi
T
4
5 6
005
125
5 PC -I
CI B
3
R2
2.2 MEG
NA/
3
I5 1R 3
MEG. VOL CONT
.02
2
,5e-
-o- EXTERNAL CON-
NECTIONS TO PRINTED
L(X)
BOARD. OSC. COIL
VOLTAGES MEASURED BOTTOM
WITH A V.T.V.M. VIEW + 90V
RESISTANCE VALUES ARE IN OHMS K.1,000,MEGH,000,000.
36AM3
18 FY6 I8FW6 18FX6 32ET5 36AM3
CAPACITANCE VALUES LESS THAN (11 ARE IN MICROFARADS 1.44f ),
AND VALUES OF( I) OR GREATER ARE IN MICROMICROFARADS
5
Waif ),UNLESS OTHERWISE INDICATED.
4 3 4 3 4 3 3 4 3 4
+115V
APPROXIMATE SENSITIVITIES
DUMMY INPUT FOR 05 WATT OUTPUT INPUT FOR.5 WATT OUTPUT C6
CIRCUIT POINT 02
TO GENERATOR (04 VOLTS ACROSS VC) 11 26 VOLTS ACROSS VC.)
I 05P, AT 2000 UV 5000 UV
455 KG INTER LOCK
05 Pr AT ,SW
2
455 KG
STANDARD LOOP
60 150 ILFF AJTOt
= PLUG
3 AT 1000 KC 200UV/M 500 UV/M '
co 71.77 _
CLOCK MOTOR
R5 R3
H
co R2 -PC
I 8FW6 C4
TI C3 R4
C6 T3
I8FX6 T2 I8FY6
0 0 3f6--A-M3
RI o
ALIGNMENT PROCEDURE
Position Frequency Generator Trimmers Adjusted Function
of of Dummy Output in Order Shown for of
Variable Generator Antenna Connection Maximum Output Trimmer
Open 455 Kc .05 p. fd Pin 7 18FX6 Al, AZ, A3, A4 I. F.
Open 1670 Kc Test Loop A5 Oscillator
1400 1400 Kc Test Loop A6 Antenna
1000 1000 Kc Test Loop Fan CIA Plates
600 600 Kc Test Loop Fan CIA Plates
24
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ARVIN Industries Model 5594, Chassis 1.46900
RC -I
220 K 50. V
470 5 I8FX6
= T2 5 18F \N6
L: I T3 El - C4
01
r 6 x 13-6 5, /
T4
CIA 2 180/L
PRI
L_
5 6
005
4
9
2 125
431JK
PC -1
5
CI B 3 2
V R6 R2
-.9V 100K 2.2 MEG
R5
C3 1200 - I w
3
+.13 -
!MEG5 MEG VOL CONT
2
III
1:_°°5
6 B MEG
7 4
_
C5
EXTERNAL CON-
NECTIONS TO PRINTED
BOARD
OSC COIL V
VOLTAGES MEASURED BOTTOM OV
WITH A vT V.M VIEW
11...TO VOL. CONTROL SHAFT 364M3
RESISTANCE VALUES ARE IN OHMS K-1,000,MEGH000,000. 18 FY6 18FY6 IBFW6 32E'5 RAM',
CAPACITANCE VALUES LESS THAN (1) ARE IN MIIROFARADS (14), 6 5
AND VALUES OFLII OR GREATER ARE IN MICROMICROFARADS
(/4419 ),UNLESS OTHERWISE INDICATED. +115V
4 3 4 3 4 3 C6
01
APPROXIMATE SENSITIVITIES
GUMMY INPUT FOR 05 WATT OUTPUT INPUT FOR.5 WATT OUTPUT INTERLOCK
CIRCUIT PONT TO GENERATOR (04 VOLTS ACROSS VC) 1126 VOLTS ACROSS VC)
I
05,,c AT 2000 UV 5000 UV APPLIANCE
455 KC OUTLET
2
3
05,4f AT
455 KC._
STANDARD LOOP
AT 1000 KC
60
200UV/M
150
500 UV/M 00 \ V :1 CLOCK
TIMER
-I-R5
6
3 6AM3
T T2
i8Fx6
I 8FW6
ALIGNMENT CIA
Output meter connec-
ted across voice coil. CIB RI
Generator ground lead R3 R6
to floating ground.
Modulation 30%, 400
cycles.
it ALIGNMENT PROCEDURE
C2 TI
Position Frequency Generator Trimmers Adjusted Function
of of Dummy Output in Order Shown for of
Variable Generator Antenna Connection Maximum Output Trimmer
Open 455 Kc . 05 p. fd Pin 7 18FX6 Al, Al, A3, A4 I.F.
Open 1670 Kc Test Loop A5 Oscillator
1400 1400 Kc Test Loop A6 Antenna
1000 1000 Kc Test Loop Fan CIA Plates
600 600 Kc Test Loop Fan CIA Plates
25
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Arvin INDUSTRIES, INC. MODEL 2094, CHASSIS 1.49400
6.4.n
BROWN RIGHT CHANNEL 100 V BLUE
7
R2 A
m
STEREO
100K 0
CARTRIDGE 2-5
1.8 V
3311-
10% 6.4.n.
CARTRIDGE
LEADS RI B B-
RED - RIGHT
I MEG 100K 2-5
WHITE- LEFT
LEFT CHANNEL
BLACK BLACK 82n 10% 7
GREEN- COMMON [>ll 65 MA 110 V WHEN SERVICING
HOOK PHASING
R7 SELENIUM RECT 40,ufc/ DOTS (0) AS SHOWN.
-
7v CIZ
AC ONLY (HOP /\. Le.1
60 I 14
MOTOR
ALL RESISTORS 20%
UNLESS OTHERWISE STATED. V /0/
SW -I B- CHASSIS
ARVIN Industries Model 8092, Chassis 1.48300, and Model 8093, Chassis 1.48600
R 3R
RIGHT CHANNEL
105V
MONAURAL 470 K PHASING DOT
OUTPUT 7r :5,951R
C2R R4 R
RED
El 48v .02 47K 51/4 SPEAKER
6 2,5 (RIGHT) 6.4/1 -
RIR 1/212AX (R)
2 MEG
7
BLACK C6Z
R 5R 1
100K
7.2V 5 ,uf 2 5V
LEFT SIDE 809/
R2R RECORD STORAGE
3.3 CABINET
R7
MEG R6
2 MEG
82 TRANSFORMER e SPEAKER 6.41,
TONE 1W PHASING DOTS
RIO 1 BALANCE 1
STEREO R2L CONTROLS CONTROL 10% 4R-mo" (IN PHASE TERMINALS)
CARTRIDGE 47K
3.3 7W
MEG
1
1
V 10%
RI L
2 MEG
74V 3
C3L
R5L
1COK
35C5( L) R9L
11.1
_- J
D:)I5 ioo
C7L TOP HINGE
1/212AX7(L) ,C033
BOTTOM TOP
C2L R4L HINGE HINGE
R3L
470K BOTTOM
LEFT CHANNEL 105 V HINGE
35W 4 C65 PHASING DOT
12AX7 35C5 35C5 35W4 4 0,Aftr NOTES,
150V
7
I. t 8- *CHASSIS.
5 4 3 4 3 3 C6x 2. (h* EXTERNAL CONFECTIONS TO PRINTED BOARD.
60µf 3. VOLTAGES MEASURED WITH V. T. V M.
INTERLOCK I50 V 4. RESISTANCE MEASURED IN OHMS; k 1,000 ;
MEG 1,000 ,000.
O LI 5 RESISTANCE TOLERANCE IS 20% UNLESS
P
* 8093 HAS SEPARATE SPEAKER OTHERWISE INDICATED.
6 CAPACITANCE VALUES LESS THAN ONE ( ARE I )
IN miCROFARADS ( ), AND VALUES OF ONE (I)
117V-60-- C5 CAUTION: OR GREATER ARE IN MICRO -MICROFARADS (PA.')
--G.fiC=1 2 COMPONENTS IN THIS AMPLIFIER ARE INTER-
UNLESS OTHERWISE INDICATED.
CONNECTED TO RESULT IN A CONSISTENT PHASE
RELATION BETWEEN APPLIED VOLTAGE AND
o- VOICE COIL MOVEMENT ( I.E. A POSITIVE INPUT
OFF -ON PART OF CHANGER V VOLTAGE MOVES VOICE COIL OUTWARD IN RIGHT
CHANNEL, INWARD ON LEFT CHANNEL.) DO
TO CHANGER NOT DISTURB THIS PHASE RELATIONSHIP
FRAME DURING SERVICEING.
26
VI V2 V3 V4
CONVERTER I. F AMPLIFIER DET. AVC. IsTAUDIO OUTPUT
1213E6 TI 12BA6 T2 12AV6 5005 T3
---
CI I
LI 02
CIO .005
6
11
L <Jr
6
6" co. 0
w t-
I C6
.002 co C8+C9 r-
_,L J._ RI 4" PM
C15 01 00025
22K 34 34 34 .000022.
34 SPEAKER
---77
C. C2 e:Vv) RIO R2 R8
R4 500 K VOL :31( 150
d 1.0 M 220 L. 2 16-4 4_11
z O) L2 CONT.
0 C3 C4
U R9
R3 1500
3.3 1W
AVC M
B+
1012
C5 50
.02
-
1 5C013
I. F. 455 KC.
CLOCK
co
APPLIANCE OUTLET MOTOR V5 C
( FOR MODEL 180 ONLY) RECTIFIER
35W4
ALL RESISTORS WATT UNLESS OTHERWISE NOTED I E3
L_ CI4
= CHASSIS GROUND 4A
INTERLOCK .02
ALL CAPACITORS IN MFD. 105-120 V.
M=1,000,000 OHMS 60 CYCLES 6 F
K =1,000 OHMS AC. ONLY °it SWITCH
ON
CLOCK
V4 VI V2 V3
BULOVA Models 160, 170, 180. Model 330 is similar electrically to these models, 4 3 34 4 3 4 3
but uses dual speakers and phone receptacle, and omits clock circuit.
2N185
POWER OUTPUT
(MATCHED PAIR)
PM
2N252 2N253 2N254 2 N 238 SPEAKER
T2 2P10 I F AMP T3 DRIVER T4
2 3 C9
3 C
( T5
ad 12V
011 a RI7 R18 C,2
-1110
Aci 0I c' 120 I 10 50V
I
4. I5K`, 10% 10% 0
cn
VOLUME
k;ONTR CIO
50
V 0
4 700 EARPHONE
R6 R7 R8 R9 0% RECEPTACLE H
470 - I5K 1K D295 R16
10% R 10
DETECTOR R12 47
2N185
47K IO%
POWER OUTPUT
10% (MATCHED PAIR)
1C13
3-
I 12V. R15 C
I C18 C19 13,
RI9 100
470 50 t:J
RI94 102 6V I+ ON -OFF SWITCH
6V O
R20
SCILLATOR
10K C
T6
10%
r--13 C1411
001
30V 4R2I
700
16
10%
I
11 ,C15I(
.02 1 CI7 R22
IK
TI T2 T3 T6 ALL RES,STORS 1/2 WATT ±20% UNLESS OTHERWISE NOTED
= g 12
02
ig 03 4[1 03 40 03 40 03 40 K. 1,000 OHMS
r I CI6A 60 60 ALL CAPACITORS IN MFD. UNLESS OTHERWISE NOTED.
CI68 02 III 02 10 02 10 02 In D C WORKING VOLTAGE IS 25V UNLESS OTHERWISE NOTED.
:4
CAP CHASSIS GROUND
L OSC. COIL
_/
/ VAR GREEN DOT
PNP NPN
EMITTER COLLECTOR COLLECTOR
BASE BASE BASE
COLLECTOR
EMITTER EMITTER
I. F. 455 KC. TRANSISTORS
BULOVA Model 660 (Hercules)
2N 4 I 0
2N412
2N486 2N483 21-20 ON -OFF
REFLEX DETECTOR SWITCH 9V.
MIXER -OSC.
R8 330
2 TI -1 C840
L
T2
PM
CIA CIB A. INT -11 +T1OV T3 SPEAKER
R2
10K R5 1
B
33K
C2 33K
.01
J4 2N408 g
3
VOL. L2 = 2N6 3 I
CFONT.RI OUTPUT
1 C7
.01
R3
15K
R7
C9 EARPHONE
I. 5K
R9 RECEPTACLE
R4 1100
5.1K 150
T02 +T 3V.
+5q_
VAR. COND.
ALL RESISTORS 1/2 WATT -2-.10% UNLESS OTHERWISE NOTED.
TI T2 0 K= 1,000 OHMS.
EMITTER
E(0 ALL CAPACITORS IN MFD. UNLESS OTHERWISE NOTED.
49 03 40 BASE
93 D.C. WORKING VOLTAGE IS 25V. UNLESS OTHERWISE NOTED.
5
COLLECTOR
92 9 02 0 -1- = CHASSIS GROUND.
FLAT TYPE ROUND TYPE
(SIDE VIEW) (BOTTOM VIEW)
RED DOT YELLOW DOT
BULOVA Model 680
I. F. 455 KC.
C7 12p.µf
ANTENNA JACK 2545 2556
2552 2553 T3
J2 L1 IN 60
TI II
II
II
ro
C15 10µf 3V
VC' C 0051.0 C3200pµf II in!
/
_.11111
12 0 T4
Jt 01610µf iov
0 0
C19.01µf
L2 R 91K c
/77
N
O
C19
ru 30µI
3V
C1.01,1( 0 JI
R1 6.8K ro EARPHONE
JACK
33K R4 56K R7 10K
421
CIO
.041if
017 10µ1 10V
ALIGNMENT _7_ 9V BATTERY
O td
J, N -
Connect V.T.V.M. to speaker terminals; or VOLTAGE MEASUREMENTS I
through 10p.f to 2S56 collector to ground. /SI
At 11 milliwatts output voice coil voltage Normal voltages measured by a 50 k/volt /77
is about 0.3 volts and collector to meter and a fully charged battery in the set
GL) O En 1-3
ground voltage is about 3.7 volts. O CD
Vc Cr O O O 0
Ve Vb IC 0
13 milliwatts output gives about 10% dis- C
2S52 8 1.3 In CD
1.3 0.2 CD °
CD
tortion. This level will give a voltage 'CIL CU
2S53 8 0.5 0 to
0.3 0.5 cD
reading of 0.4 volts at the voice coil. 2S45 5 1.2 O <
1.4 2.5 to 3 CD
Follow alignment procedure in the table CCDD Ii
2S56 9 1.3 1.5 to CD cr
6 to 8 LQ
below. 121 o
Cl)0 a
O< CD
C (11 0 UI
Alignment 2 3 4 5 7 8 9 CD rt
Procedure 10 rt rr to
to < C/
Alignment CD
CD
Circuit IF Transformers Oscillator Circuit c 0 (D, Ii
Tuning Circuit
CD C UI
CD
0) CD
Signal Connected CL Cn Ii
Between Outer Antenna Jack
CD rr
to Generator Test Loop ca)
and Earth Potential a Ct O
1--
-I 0 O0
Signal Generator 640 640 Cri
455 KC 455 KC 455 KC 455 ± 10 640 KC 1240 KC 640 KC UI
Frequency 1240 KC (1)
1240 UI 0
1240 a
CD
(11 CD
Dial Pointer CD Mark CD Mark CD Mark CD Mark CD Mark CD
CD Mark CD O rT CD
Around 1600 KC CD
Setting (Lower) (Higher) (Both) (Lower) 0 CDO
(Higher) (Both) C1)
cr CD 0 00
Adjust for
a (D
Repeat Osc. Coil Osc. Trim- (D
Repeat Antenna Trimmer Repeat cr3 0)
Maximum Output IFT3 IFT2 IFT1 Nos. 1, 2, mer (Rear Nos. 5, 6 Coil r(lT O rr 0
L2 (Front Nos. 8, 9
UI-s 0 ethp,
and 3 Section) Section)
J2 ANT JACK
2556
o JI EARPHONE
15
JACK
2554 Ci3 r.
TI T2
.04µ1
1 1o
II.
II
I I
C4 ,2O/,' C6 5O/Jf 21/4` SP
VC
2552
Co 02of 2S56
C
0
C2 .005of
L2
VC2 0
0 0
oI of
RIB 2200
^oh'
= 9V BATTERY
SI
For alignment see instructions
under Model 400, on page 30.
VOLTAGE MEASUREMENTS
Normal voltages measured by a 50 k/volt
meter and a fully charged battery in the set
Voltage Distribution
Vc Ve Vb Ic
2S52 8 1.3 1.3 0.4
2S53 8 0.3 0.4 0.3
2S45 8 0.35 0.5 0.8
2S54 7 0.8 0.9 0.8
2S56 (each) 9 0.02 0.12 1.2
Normal battery current 8 ± 2 mA
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
COLUMBIA
PHONO 50E115
MODEL C1010
INPUT CHANNEL!'
I CONTROL 2-5
6 105
T -I
: I: 1 OUTPUT
_1
DUAL TONE
CONTROL
R-1
1 MEG. 62
R3 -A
4.7K
25K Oaifj
SET SPEAKER
SEPARATE SPEAKER
ENCLOSURE
47K 20MFD. R 3-B
R-2 EC D
1 MEG. 25K
2 OUTPUT
DUAL TONE
L CONTROL
2-5 T-2
6
PHON
T..05
INPUTO CHANNEIf2
2 CONTROL SOEH5 7
117 V.A.G.
tam
60 CYCLES
K 210
14 5W. +
0 0 0 C--
+ + + SR 22R
20
MFD.
40 - 100 M.A. 14.
MFD.
EC -C EC -8 EC -A
12011
EC SW.
4 3 4
joted6osawol
05
SOEH5 SOEH5
CHASSIS _
GROUND RECORD CHANGER
BASE GROUNDED
CBS -COLUMBIA Models C1012 and C1148
.0l
100K
:270K
= 270
:2702 *AM
CHASSIS SERVICE
SR
100 M A 1. Remove top control knobs
2. Remove cabinet back
3. Remove 2 chassis mounting screws
NOTE: to completely detach chassis from cabinet
'50C: 07 AOC: 122075
requires removal of stereo output bracket, motor
plug and ground lead.
32
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
COLUMBIA Models C1152, C1154,
C1156, and C1160
The Amplifier is stereo self contained amplifier
t1
each channel. A control unit containing dual con-
containing two complete amplifictition channels. trols to provide zuljustment of both channels simul-
using 611Q5 tubes used us single -ended output in tuneously is used with this amplifier.
CHASSIS LAYOUT
J2 JI T2
00 INPUTS
V4
5Y
SPECIFICATIONS
Power Supply
T1
Voltage
e
BALANCE
6BQ5
V2
POWER TRANSFORMER Frequency
Wattage
117 volts
60 cps.
95 watts
T3
7VI
Audio System
V3
I 2AJCI 6BQ5 C6 Output Trans. Impedance
CH -1 Pri. 5200 Sec. 3.2
CH -2 Pri. 5200 See. 3.2
RIO
15K
R5
CI R6
2200 1500
VIA R7
1/2 12Ax7 105VDC R22
100 22
RI
C7
CHIJI 474 4R7404 C2
INPUT 01 T TB I
3 250V DC
94VDC BLU T3 GRN
V2 O
GRN
Re 6805 III N .13
RED R20 V3 V2 VI GRN/
R2 470K 100 REAR VIEW
1200 3
...r.A. r.i__, 9i' TEL
R3
275 RI4 3 2 I
700 VDC BVDC C6D 82 290V DC RIB RI9 IR.,.). '41° 1,I 4 4 4,5
C5 2W 1500 120 GRN
I
3w WW 100
20/25 BALANCE 275VDC 40/ 275VDC 2W 300V DC TEL
vo.--4.---New
R9
3
12 ice5 _.....c3r _LceA 5 V AC
TEL
VB 470K V3
RED GRN if 20 '1'450 ;7 450
2 V4
50301
1/2 124x7 6805 BLK
7 RED
Ril 94VDC 250VDC BLU
J2 47K 8
01-12 7 RED/TEL
INPUT
RI C3 'Ca- CB
470K
01
6
R17
105v DC 100 RED
vv, Ti
Ri5 C4
R16
NOTES
2200 1500
CAPACITANCE VALUES ARE IN MiCROFARADS UNLESS
RI3
OTHERWISE INDICATED
I5K 2 VOLTAGES MEASURED WITH NO SIGNAL.
3 VOLTAGES MEASURED IN REFERENCE TO GROUND
4 LINE VOLTAGE IS I 17 V AC, 60 CPS.
PH ONO J101 ie.' BLACK CHANNEL NO I
INPUT
NO I
R103
(a1 RIDS
R101 3 3mEG P101
2204
MEG VOL 36'' BLACK
TREBLE
ILJTON0AMP
R102
C102 100 K R108
3BASS 220
PANEL
SECTION 2000 C109
PHONO JI02 18. GREEN
INPUT CHANNEL NO 2
NO 2 0105 t
8103 68
R106 8102
MEG 36" GREEN
2204 TO AMP
TREBLE
NO 2
R102
3 MEG 0106 RiO9 BIOS
BASS 220 2000 [004
REAR
SECTION
CI 10 CONTROL UNIT
33
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Emerson Radio "TRANSTImER
CHASSIS 12C477
L 888
:4;ILAZON: Fowl. 4114.8.8.7
ni.0.81,048c 11... 1401411100.
I ST I.F. AMP, 7,10.= :I4::;== 3RD I.F.
CONVERTER T-2 I 2ND I.F.
+ Am P.
\
AMP.
1ST
AUDIO AMP AuDiONDAMR
P.P. AUDIO t T-5
0-I T-4 OUTPUT
n 1 n ---w--,. 0-5 0-6
s
0.16V .3.6v
L -I
Rio I
S.Sv
s -I To
0-7
POO P.P. AUDIO
OUTPUT
I (IT
aao
04 ono 410 4-6 PS No.msoss,
6011004444 4- FT FP 6160,..
F148111 .2000141 mis {1 Pt NO 8408,
tssecolom.
j
lOOP AO 81601Is
- 111,1714:1.-Iy.0LTS
FIG. 2 - SCHEMATIC DIAGRAM, CHASSIS 120472
ADDITIONAL TRANSISTOR INFORMATION NOTE
IF ONE OF THESE TRANsISTORSIO-T OR 04/
FLONIES DEFECTIvE.SEPLCE OT4 OF TI.ENI
NEFr mTCAID PAIR tPT. P.O. 8450301
TRANSISTOR PAIRS ASSOCIATED
Q-2 Q-3 R-12
TO SPEAKE/ a TO SPEAKER 24 22K
815045C 815045E 680 VOLUME CONTROL " 2.7g
5
8150450 815045B 680
815045D 815045D 680 T4 8Rg
R17
470
(455KC)
R13 PLAT
2.5K
CIO
EI
NED
0-7 0°_,3
BATTERIES
TO REMOVE BATTERIES PRESS EACH ONE BACK
AGAINST ITS SPRING AND LIFT UP FIRMLY .0047
11-42-110-1
REPLACE RADIO BATTERIES WITH LEAKPROOF C5 R22
"C" SIZE EVEREADY NO.935 OR RAY -0 -VAC is MED I. MEG
NO.ILP 2.7K
RADIO BATTERIES MUST BE INSERTED 0, 0-0-40
WITH BUTTON END UP AS ILLUSTRATED.
REPLACE CLOCK BATTERY WITH LEAKPROOF
dti 2 TI .0 Y' L2 "
R23
"D" SIZE EVEREADY NO 950 OR RAY -0 -VAC
L-I
sem., 0
"
NO. 2LP.
CLOCK BATTERY MUST BE INSERTED WITH ..10 CT I 455KG 600KC
+6V
BUTTON END UP AS ILLUSTRATED.
TO START CLOCK SHAKE SET GENTLY. TO BATT
BD.
JZrZSSSZSZ;ri TRIMMER
44
FIG. 3 - ETCHED PRINTED CIRCUIT CHASSIS 120472 (TOP VIEW)
FIG. 1 - BATTERY & CLOCK INFORMATION
TIME -SET KNOB (On back of clock)
1. To set time, pull time -set knob out and turn it counter-
GENERAL DESCRIPTION clockwise only.
Model 888 "TRANSTIMER II" is a completely self -powered 2. To set time for alarm (as indicated by Alarm Time Pointer)
8 -transistor superheterodyne portable clock -radio. The hold knob in and turn it clockwise only.
clock -timer, in conjunction with the associated circuitry CLOCK REGULATOR (On back of clock)
will provide "automatic turn -on" of the radio or a "buzz - Insert a small coin into the slotted clock regulator knob, and
alarm". Either can be selected with the front panel control turn it slightly in the direction of the arrow at the letter "F"
(switch on volume control). The buzz -alarm sound emitted if the clock is losing time. If the clock is gaining time, turn
by the speaker is created through regenerative feedback in- the knob slightly in the direction of the arrow at the letter"S".
troduced by R-25 and R-26 in the last two audio stages FOR RADIO AUTOMATIC TURN -ON, OR FOR BUZZ -ALARM
(Re. figs. 2 & Feedback voltage of the proper phase 1. Turn Master -Control Switch on clock -face to "ON".
will only appear across R-25 when SW -1 is open, making the 2. Set Station Selector to station desired.
feedback from the output of Q-8 to the input of Q-6 effective. 3. To be awakened by the radio, pre-set the Alarm -Volume
Knob to the volume desired.
The manual on -off switch contained in the clock -timer will 4. To be awakened by the electronic buzz -alarm, pre-set the
now turn the set ON or OFF since SW -1 is no longer used as Alarm -Volume Knob to its extreme counter -clockwise posi-
the battery on -off switch. tion until a click is heard.
5. Push Time -Set Knob in and set Alarm -Time Pointer to time
CLOCK -TIMER selected for radio or buzz -alarm to go on.
The clock operates continuously on a separate leakproof "D" 6. Set Master -Control Switch to "AUTO" position.
size battery. It will not operate initially until fiber insulator
(included for shipping purposes) between battery and its con- TO TURN RADIO OFF AUTOMATICALLY (SLEEP SWITCH)
tact is pulled out. Turn Master -Control Switch to "OFF". Set Automatic "OFF"
TO START CLOCK AFTER FIBER INSULATOR IS RE- Switch (sleep) knob for any time up to 60 minutes. Radio will
MOVED, SHAKE SET GENTLY. be turned off after playing the approximate amount of time in-
dicated by the Automatic "OFF knob: This feature is
especially useful when using the radio after retiring at night.
34
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MODEL 888, "ATLAS," "EXPLORER," ''VANGUARD,"
2" mersonCHASSIS 120374 (See page 36 for Chassis 120485)
9_-_? ui
I w.ri Tril ...Lbw.. Tit.SiSTOW
COUS4111,0DiS idiJST IR 011110.0 71 := ri:
1,00 SiS0451, Win.
';::::.T.'.'Z:
7004050
OuTIDLIT
T-I ,sr
3
T-2 040
4
1 Di SRO rf T-3 iST Dia SAJONO 1-4 t 0 -7 T5
*ir2,.,,,r,...2=.7,
CODivENTER
I 0-1 .. =..:.=''i tri Or....2tI';`
I
I ' it II DETEST..
SP
rz ' 1
I
.._-,*T"
.
L- I
J.. .. ,L
:101 ..N
s41
-11-
r -illi
1
0 "'s
,1, -Ii I
ifOiifirE
TS.E1
,.....
4_
--:: " iw
1,
"not L-2 IF: ,ia
Eytoil 1).> Mao.. iEargui 11,1.06013.
:50'0 Otin
i"' L;;;Di
11..r. Hti 0.101,1400011.11
I . " "' ''*"' * S. 4k...14 I RAM, O O.C C0.1t.,00.
!ZE SCS"'!ITO!:
I. 0 * ELICTIDOLTT.
L °
CHASSIS NO 1 2 0 374 t -11-11-41-11-1
BATTERY - 6 VOLT
111ic11l CELLS I
FIG. 1 - SCHEMATIC DIAGRAM, CHASSIS 120374 TRANSISTOR PAIRS ASSOCIATED
(VOLTAGE READING CONDITIONS ON PAGE 36) Q2 Q3 R12
815026C 815026A 680
815026B 815026B 680
815026B 815026D 680
TO CT -A L- 2 T-1
o 815026C 815026E 680
815026D 815026D 680
C ON
Y
EBRJA
815026C 815026F 330
TO 815045C 815045E 680
CT -B C -5 815045D 815045B 680
15 MFD
0-2 C -I3 815045D 815045D 680
VAR. AP GNI/ .4r.
A
41
R-22 1
I MEG. *C44
A 01
.411. TRANSISTOR SUBST. TRANSISTOR
a .0047 NOS.
c_7, C-14,N0MFD FOR USE
R-1 ,39K
815026B 815026D Q2/Q3
VAR.
CAP c 0-7 815026A 815026E Q2/Q3
SAKI -I o T4° 815026C No subst. Q2/Q3
GNU
815026F No Subst. Q2/Q3
815028 815032 Q5
221*----14%IC- 815031 815032 Q5
02 815033 815032
...=16r GN0. Q5
A 2,3 0-3 815034 815032 Q5
815035 815032 Q5
3.3K TRANSISTOR ASSOCIATED
In J Q5 R14
815031 3,300
NOTE
* REFER SCHEMATIC, EXTERNAL LISTENING 815028 8,200
TO 815032
FIG.1, PG2, FOR VALUES. ATTACHMENT JACK SP -1 4,700
(TERMINAL VIEW) 2.3.211
815033 6,800
815034 8,200
FIG. 2 - ETCHED PRINTED CIRCUIT, CHASSIS 120374 (TOP VIEW) 815035 10,000
ANTENNA
c5...ATTTAcER; (-
SHARD
SPEAR,
ANTEN110,44.
0-I
PMI HIKER
!T1,71
BOARD C41
T-1
L-2 1-1
a-,
ii
L 0-2
EiTai
0
11004C 455.0 OSCILLATOR - 4551IC
Q-3
PAM
CT -A lot 1 F MAP
CT -A .4 TRIMMER
TRIMMER RE 1400 KC c
R f 100 KC 77
CT -B
nit! CT -B
TRIMMER --
0-5 KAV.Z8;Aun
° MC Mb KC
o;r."'C. I
0-3 X-1 PAR 0-4
DIP%
T- 3
vD.
0-4 T LI
554C
11.611.
J- I EXTEilIA lElirLi5T-ArTxcm X-1 WITHIN T-3 J-1 EXTERNAL IEEYLIST ATTACH_ JACK
FIG. 4 - TRANSISTOR & ALIGNMENT POINT FIG. 5 - TRANSISTOR & ALIGNMENT POINT
LOCATION, CH. 120374 LOCATION, CH. 120485
35
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
EMERSON RADIO Model. 880, "ATLAS," "EXPLORER," "VANGUARD,"
(For alignment points and transistor locations, see drawing on page 35)
Chassis 120485 0
T-4
0
L -1 11;.1115..111?Zr
.4611
cimml xatz,z......
Trtv * "*"" Ircro=16V"'"
CI I- ..s.slonsznszvow
0
;At
4 4
.)0. 14,01547001.
`AO 01 01C001111
:.1 otikC0 MTN
,01, OWEOP
CC. Mt
112:41. >0.40,01111
SEE C.P1j,
FIG. 6 - SCHEMATIC DIAGRAM, CHASSIS 120485 (VOLTAGE READING CONDITIONS
4-1
R-4 2.2K
if
ClICIB
co.)
I.
.04
- L
P
VL
VOLTS
TS VOLTS
VOLTS
F
C-7,10 MF
E C-4
R 20,000.4- 1630 )KC 0-3 C-178
R R-9 50 MF R-26
;-3.3 K 440 8 4/-7-"A"--- 0-7
E "K E5214r1F 0-8
8 C-8 R-20
c0002 0,0 150
R-
L
'") C-9 4
0 p00 20,000 T-2 C-16 +
P ),_00 1C-131 2 MF
R1 69 C: 22 R-16 R-24
\
N
T
33K 18K
455KC
N
R-23
412 120
N 10,000 .-914 1,--40/1--
R-14, 5K
20
C-10
I-- 0-6 R-.#W-
-22,1.8K
4 / SW -1 AN C
R-12 " T-3 k.appi 0-5 8
C -15 S--
20,000
TRANSISTOR
330 )..' *
6 .7) 5 R -I3 R-tVR-21
9 REPLACEMENT
TO
1)2110)10.
Q-4
455KC 11
2A
011111
.\\1-12
20,000
47K
sq.: 1.5K
C-14
210
100-MF
INFORMATION*
C 1A
(Pt) TRANSISTOR PAIRS
EXTERNAL LISTENING To
ATTACHMENT JACK 01 Q4
.TERMINAI VIEW) /11 I
SP- 1
Z .18 .fl 815051H 815054A
FIG. 7 - ETCHED PRINTED CIRCUIT, CHASSIS 120485 815051A 815054B
(TOP VIEW)
CONDITIONS FOR VOLTAGE READINGS
1. Voltages indicated are positive D.C. 0-5 - 1ST AUDIO Q-6 - DRIVER Q-7 & Q-8 - OUTPUT
2. All Measurements taken between points and chassis. 815055 815056 815057
3. Voltage measurements taken with: Yellow Dot Yellow Dot
(a) VTVM
(b) Fresh 6 Volt battery supply. Four 114 Volt con- ANY Green Dot Orange Dot
ventional penlight cells. COLOR Blue Dot Red Dot
Note: Should Mercury or Nickel -Cadmium bat-
teries be used, an approx. 15% lower voltage Violet Dot Brown Dot
reading will be obtained from the battery supply
which is considered to be perfectly normal. Bear NOTE: * Because of the small physical size of the transistors,
in mind that the voltage supply will vary slightly the 1st three digits, "815", have been replaced by the letter,
with the type and condition of batteries used. "E" for Emerson. The "E" also signifies that these tran-
(c) Volume control set for minimum volume. sistors have been made to our design tolerances.
(d) Variable capacitor fully closed and no signal ap- These sets utilize an etched circuit board chassis 120374
plied. and 120485 identified by part number 630225 and 630243
5. Nominal tolerances in component values make possi- respectively. The part number can be found on the etched
ble a variation of ± 15% in readings. circuit side of board. A paper label located on the external
Caution - When taking voltage checks, avoid accidental connection jack, containing the last three digits of the
shorting across transistor leads as It may cause tran- chassis number, is another means of identifying the chassis.
sistor damage. Do not use a non -vacuum tube -type volt- CAUTION: As with all transistorized equipment, do not
meter as the relatively low shunt resistance of this type place close to a hot radiator nor keep in an unventilated
of voltmeter can easily disrupt the transistor bias and area such as the rem window shelf in an automobile. High
result in erroneous readings as well as damage to the heat might cause damage.
transistor.
36
0
77R7OINCR.UP arm6144
S-' c*"."`T*" S-3
It
AM TUNER BOARD Cali MONAURAL AND STEREO AMPLIFIER BOARD
ml At
aM *7 4 "T -T1-1
... \ (=-4- GA
\\.1.51126 I CD cn
e,BA61 ssS,o..1,., Iona 0010 AMP Q.
* I I sI!. nova c9..ac, masa.
2
OF 313333R .146IT 77
I "e I2AXT T -I 033ERVIED.
lAg_1441 RIGHT aity/nay -S
"T.49""'.111:1 CHANNEL SLUE RINE TO
I "51.1 COn0 TERIOINAL. CD
...
r I VI
icoVAT
col°
1
CD
E.O
SOr At
FOM SECTION :sfR4e,. MA r8.«. U)
or caa 118'
6.1a C) ri)
L-2 '7;1'1 REAR CON OL Zrat SP -1 CD
uaasl
Cn U)
SW -2 0
5-PC13 FUNCTION SWITCH
4.0C ROM -
SW -3 CD
TCS:1110, C- 0-1.021,010 C
ITRIBLEI -L- ET SPI5511317071
CD En
103111010. CO
FM TUNER 0 WINN. C.T1
P11710 OSIC ENO FM I I AMP 0 071110
V-6031607/3 J 4 FM nliCTOR 0 MM..
V-66RA6 8------. X-3 5-47 c-a 5-1110 /014
,, 17,51 FTONrE
T% =4 47.
:I R -e 12AX7
o
, ,,i. X 500.: V-3 T-2 C cc)
.1 of 25E145
t-TIIYII L' C350 T
rIIN542 XI
CD
C-42
: 71
se 1
oW0 N ..... Cr) co
, ATT . GA CD
Ci T LEFT I rang
.4 C-6
01,530 CHANNEL 40000
P-1 ov -DTI ty t000 680g LW At
C-37 DOT
13,77141.00
- TNI
COONTRO ^
a""UN C -al
OT
15 I leASSI S4/00 ro CD C.)
rieTig PT
I fa AT): 0
CD
R-20 C- le -:-2.C-111 44.4.C-141 CD a.
oor R- 46 CD U)
T-5 IISW4031, I C1)
37 rM 1.1 AMP vW I.... Imre raw
X-2 V-76BA6 FT- - - NOTE
rr (,)
L- 1-7
CAD
,ZietieL EPtitT0 NT IN
,"
PROPER vOLTAGE DROPS IC -4' ca CA
iJMea CO
RICTIFIN
LI SI-I
lee
'!")I
"T: CO Es..)
IC.1. 1 L11 1.-I2 2c"
c .7°! 2-15 IL m
C -54 C
I0,000 O c
EP
7 SW-, CA
CORTROtuT CCC F.1005
22. V-9 sxr,.. C -35
CA
ix MA'Ea{i000 R,2-2'
151013 41 D "
E R S
u_, CR, AV CD
FM TUNER BOARD ID
'NE:CVO -.1__j '1 Cr)
CD
NOTE':
"
".'"'°" In
SOME SETS R I AND E-14 ,7t47.1g5501"
i,T',N50X -taga°7 4:TgigPA.Ds
NTENNA ARE 4,1, 2 RESPECT.,
1%0000AI ELECTROLYTIC. RESISTORS IN ONMS Ipt $000
A,. mtc. yoLTAGES D NOTE S FOLLOwS .113
ror.lg Sw- 2 IN POSITION
OHMS, AND wTT oNLESS
Am/ .TEr CD
sw -2 IN FM POSITION '1
R -22 SCHEMATIC DIAGRAM, CHASSIS 120466-B
C PT
CONDITIONS FOR VOLTAGE AND RESISTANCE MEASUREMENTS , CHASSIS 120466-B CO CD
C
5. Resistance measurements taken with: p
1. Voltages are positive d.c., resistances ore in ohms, unless otherwise (a) Power line cord disconnected from outlet. C)
indicated. (b) Loudness control set for minimum volume.
2. Measurements token with Voltohmyst or equivalent. p
(c) SW -2 selector switch in AM and FM positions.
3. All measurements taken from tube pin to B minus (metal can of electrolytic 6. AFC switch disconnected at all times.
filter) unless otherwise indicated. 7. V-8 resistance measurements taken directly at pins with tube removed. ayA
4. Voltage measurements taken with: 8. Filament resistance values are cold readings.
(a) Line voltage maintained at 117 volts a.c. 9. Nominal tolerance on component values makes possible a variation of ± 15% 0
(b) Loudness control set for minimum volume. U)
in voltage and resistance readings. CD
(c) No signal input AM or FM. CI)
10. N.C. denotes no connection, K is Kilohms, and Meg. is Megohms.
(d) SW -2 in both AM and FM positions. CD
11. Resistance readings above 30 megohms are considered infinite.
EMERSON RADIO Model 908-B, Chassis 120466B, Continued on pages 38 and 39
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
EMERSON RADIO Model 908-B, Chassis 120466B; Model 909-B, Chassis 120468B;
Model 912-B, Chassis 120480B; and Model 921-D, Chassis 120495B; continued
from page 37, more material on page 39.
TO PII R-24 TO 4r2, SECTS,
II 1 i.TOCT Lit a PILOT LIGIET REM,LUG 6A Prair :REAR,
TO Sw.2
TOME.
SECT I
To To SW -2,
SEWS,INAR) Luo DUAL BASS To -.WT.
SO
TO LOOP sEcT I REAR REAR, G SA
m/TENNA LUG Ea OS TO SW2 CONTROL
rl '
CoViirecfals
4 rah .7.
-r DUAL LOUD. R- Tor 11 R -I
CONT. 250.
I DUct.PRT-1,1.,._.
R-25 To sw-2
roOTE RI MG 5,45 !Mt
CT R-4,11005 Mr PM Tuve]. Tc
LANNS CORNECTOKS.
TO 45-2
VARIABLE 4700 san we.,
CAPACITOR
C-18 44704 13 up 4446.,_4,
To.C-r
C -5I
1-4
T'2
x -a
C 25
R-49 ...re 57
33°
R-ECESINEE
047 ,-4ELECTROLYTIC A-_
U. a
1000
T. 4/167c: 3 AC IM TERLOC
To sp-1 '-/
TO221114
roue 3
Sr I 54 To sr -2 SIC,CY1;IAR
TO SW 3.uo SECT SWEAR,
RE fa ,1). LuG .
ETCHED PRINTED CIRCUIT CHASSIS 120466-B (Top View)
TUBE REPLACEMENT:
TO SW -2 TO 5w-2 S-2 P-2 1. Remove line plug from wall outlet.
SEC 1, REAR SEC 6 (ROT VIEW TO SW -2 poi mir
LUG 24 FRONT B REAR OF SOCKET) SEC 3.FRONT or IN. 2. Remove retaining screws from bock of cabinet.
LUG 20 LUG 38
I 3. Disconnect "built-in" FM antenna from antenno ter-
TO SW -
SEC 1, REAR
minal strip.
LUG IA RIGHT
CHANNEL
LEFT
CHANNEL
4. Grasp back by "interlock" and pull free of chassis.
NM' 5. Refer to tube layout diagram inside cabinet.
TO SW -2
SEC %REAR
LUG 6A TO JUNG. I
R20,1000 STIRIO
5-25
Wm,
R-511
55
50, 0 V-11
PoOT
10147;TIR)
8-18,110,50
RECTIFIER +
SI-I STEREO
rumvpiti MOTOR
SERRATION
TO V-9
2SES15 CHANGER 1:1=11tn.:2126
UM) 12457 Ac :ASTAC 13T
PILOT LIGHT
(FM) v -to 90v
TO v-2
V -I COI
SW -5
- MOS
91
S )PIN -41 TO c-64 ss
1000
IDs* (FM TUNER) SW -1 RID
R-22 P-3
TO SW -2_E SS LEAD 5.E P. Noe
33.S3.55r) C-25 R-21
S-3
REAR
1
56 r 047 22
151.1141)
OE PL.
LUG SA
0 AC
S -I P-1 oS VOLTS ST TLNS CRTR342
AC ONLY fli2RSON";/"Nr9 2521
.0 CPS) [i
tl SinoS 510.0-,0N
INUIT Of5,-;,USC*43R.04
WIRING & VOLTAGE DIFFERENCESIPOWER MONITORICH.120468-B
(BALANCE OF WIRING, USE SCHEMATIC FOR CHASSIS 120466-B) ETCHED PRINTED CIRCUIT
SECTION (POWER MONITOR), CHASSIS REMOVAL OF STYLUS
120488.B. BALANCE OF ETCHED
CIRCUIT, RE. CHASSIS 120466-B) CARTRIDGE 902326
1 P-2
PP -6 Ogl'i,Eve T0 515-S
OCOsER 2e0, SOCK, SELKu.7.1141.
SP -3
To
errta,.. chg.14,.
SP -5
am, SP -2 ail
*20,1000
IMANTAR.
SP -4
OS MAKERS
FART
81-1I
Rennin.
57 11550
CNANOER
v-,
o ca.
To )00o
SP -3 TUNER{
1,00,l11
SPEAK R SYSTEM CONN'S Ov1
CHASSIS 1204808
TOP1N
SP -2
NOTE. CORRECT PHASING
Of SPEAKERS MUST BE 7- S -I tp 5-5*
OBSERVED *5-I IS S-5 ON CM (2041515
no
111.2< CHASSID I20495B
Etched Printed Circuit
SPWR SYSTEM CONN'S CR1204855 LINE CORO COMBINATION, CHASSIS 1204958 ONLY Section (Power Monitor), Chassis
Wiring and Voltage Differences (Power Monitor) Chassis 1204808, 1204958 120480, 120495 (Balance of Etched
(Balance of Wiring, we Schematic for Chassis 120466-8) Circuit, Re. Chassis 120466-8).
38
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
FM ALIGNMENT (Using RF Generator & VTVM) SW -2 in FM Pos.; AFC(SW-4) in "Off" Pos.
EMERSON RADIO SIGNAL GENERATOR VTVM FM RECEIVER REMARKS
Step
Models 908-B, 909-B, Freq. Coup. Atten. Connect. Set. Set. Adjust
912-B, and 921-D, 10.7 MC To FM Adjust 5V Turn out top slug of Indication is obtain -
(no Ant. for 1V DC ratio 1Fx'fmr(T.6) able without slug
Chassis 120466B, sweep) Term. indica- "Hot" Scale. Tune until greatest peak touching top of
1
tion on lead to to on VTVM is indicat- IF can.
120468B, 120495, VTVM. junction a ed.
continued from pre- 10.7 MC (as Readjust of R45,
R50 e.
(as
`quiet
spot
Peak in following Adjust for maximum
above) for 1V above) order: 1. Top& output on VTVM
vious two pages. (no
sweep)
C59.
indica- "G'n'd"
on
Bot,2nd I F(T-5)
tion dial
2 2. Top& Bot; 1st
lead to (no
IF (T-7) (rear of
metal signal
PRELIMINARY ALIGNMENT tuner). 3. Bot. slug
can of in-
put)
of Ratio IF(T-6)
INSTRUCTIONS electro-
NOTE: Be sure that the dial pointer 10.7 MC (as (as lytic Adjust Carefully turn in top Varying freq. above &
is physically aligned (Re. Fig. 4o & (no above) above) filter. zero slug of Ratio IF x below center results
4c). 1. Loudness control should be sweep) control x'fmr (T.6) until in equal & opposite
backed off approximately 20% from for "0" VTVM reading voltage indications
maximum volume position. 2. Speaker center passes thru zero (Do not exceed 150
selector switch (SW -3) should be in reading. reading & turn back KC either side).
"INT" position. 3. Use an insulated for zero reading on
screwdriver and Hex alignment tool. VTVM.
AM ALIGNMENT PROCEDURE (Using AM Generator & Output Meter) CAUTION:
GRASP TUNER
Function Selector SW -2 in "AM" Position FIRMLY IN
HAND WHILE
SIGNAL GENERATOR TUNING OUTPUT SLIDING OFF
COVER.
Step CAPACITOR METER or ADJUST R-40
Freq. Coupling SETTING AC VTVM 47) 40,0,
I. F. COAXIAL
C -6N
455KC. "High" side thru Minimum Connect IF X' formers LEAD STRIP
400 CPS a .005 MFD capa- Capacity across T4, T3 top & FIL. LEAD
AM Mod. citor to V-4 (Pin 7 (fully speaker Bot. for max. TO L -I3
1
of 63E6). "Low" open) voice output indica-
side to "B minus" coil. tion. JUMPER
LEADS
(metal can of elec- X:'1?
trolytic filter). FIL. LEAD
-TO PIN 9
Osc. Trimmer OF V-1
1638 KC. Form "loop" of (as (as
400 CPS several turns of above) above) (CT -B) for max.
2 AM Mod. wire, connect output SPOT -SOLDERED
'4- GROUND
across generator indication. '-'1C:fir 0 *
output and radiate
into receiver. Pe
Tune into (as Ant. Trimmer
ANT
LEAD /1 *REMOVE TUNER COVER
BY HEATING SPOT -
1425KC (as above) DIAL BACK /4 SOLDERED GROUND
400 CPS strongest above) (CT -A) for max. PLATE
WHILE USING SCREW
TUNING
3 AM Mod. 1425KC output indic. SHAFT DRIVER TO PUSH
a COVER TOWARDS
Signal (Repeat steps PULLEY REAR.
(Re. F ig. 4c). 2 and 3 for FIGURE 5 - FM TUNER 471161 - TOP
best results) CONNECTIONS FOR LIGHT SERVICING
SW -1
R -SR -6.
DIAL CORD STRINGING- O DUAL TREBLE CONTA
CSSAJ3
AN DANA KUNKo
! FORM LOOP WITH DIAL CORD TO THE SPECIFICATION SHOWN AND
ATTACH TENSION SPRING AT KNOTTED END
.i=111111=0.
BAT STEREO IMT
4,S; ;egg' 'ATM'
2 ATTACH SPRING TO DRUM AND STRING AS SHOWN IN 0 (PRIOR
© IAN I AT START, FEED DIAL CORD UNDER AND BEHIND DIAL
SACK PLATE
3 ATTACH DIAL POINTER (RE DIAL POINTER ALIGNMENT. PG 5)
---- -------------- DIAL BACKPLATE
:5-1C
ITOR ROT,
25E145
,,A I.KKG AMR
P-4 S SOTS
FM
00P IRE I' T -T
"84'1 0-S
SOT) I I
IOS MC
AM SECTION 'TZTVECl/MONAURA011PzJ.zr"-- F. SECTION
9 %INCHES
AM
PHYSICAL
TUBE LOCATIONS AND ALIGNMENT POINTS
DI Al. {
10 54, INCHES
POINT
1540 KC I ;0 PARTIAL REMOVAL OF FM TUNER FOR LIGHT FIELD
SERVICING (Re. Fig. 5)
START__
NOTCH 1. Remove the tube adjacent to the front of the tuner
housing.
NOTCH 2. Unsolder the ground side of the disc capacitor and
the tuner ground strap (left front of tuner).
3. Unsolder wires and components with the exception
11111. AM TUNING
SHAFT of the two "Capristors" and the coaxial lead.
TRERLE-ON-OFF 1. Remove the two hexagonal screws which mount the
A't0 FUKTI 0 N
MASS CONTROL
CHAIN DRIVE
SHAFT
(PULL -ON,
FM tuner to the front of the chassis. Finally, un-
FM TUNING SHAFT WHEEL'S'
StLONa6,
SWITCH
IBEADCHAINI
PRESS -OFF) solder the spot -soldered ground on the bracket to com-
pletely disengage the tuner from the chassis.
FIGURE 4 A, B, C - DIAL CORD, BEAD CHAIN STRINGING 5. Extend connections with jumper wire.
6. The tuner shield cover slides off the rear.
39
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
TO Ra NE-SI IV -a)
lormogan
orIrrE
TO
ANON Nato.
PI
mor EMERSON RADIO
Model Chassis
SR-'
SFCAalS
901-B 120467B
903-B 120462B
906-B 120473B
904-B 120458B
905-B 120471B
S-3
ILL. SIMI
O. 1
4100
C.1.1304040,04434
13047111 OOLT,ITPI 4-1, /
111-3 0140730141.14.4,
ETCHED PRINTED CIRCUIT
RESISTANCE READINGS
SYM. TUBE PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7
1 126X7 I*570K 6.8 MEG 0 0 8 * 570.K 68 MEG
50EH5 33 470K 38 470K * 490 " 400 USED CH -120473-B ONLY
-3 50EH5 _
33 470K 38 68 470K 3 MEG " 400 (POWER MONITOR)
Measured to junction of R.17, C-16.
CONDITIONS FOR VOLTAGE AND RESISTANCE READINGS
1. Voltages indicated are positive d.c., resistances in A) Power line cord disconnected from outlet.
ohms, unless otherwise indicated. B) Loudness control set for minimum volume.
2. Measurements made with Voltohmyst or equivalent. 6. Nominal tolerance on component values makes possible
3. All measurements taken from pin to B minus unless a variation of ±15% in voltage and resistance readings.
otherwise indicated. 7. N.C. denotes no connection, K is kilohms, Meg. is move-
4. Voltage measurements taken with: hms.
A) Line voltage maintained at 117 volts a.c. (Resistances marked are measured to Junction of R-17,
B) Loudness control set for minimum volume. C-16).
C) Record changer in "off" position. 8. Filament resistances given or. cold readings.
5. Resistance measurements taken with: 741
r OWL AU -40 rr
- -1-1- - - -
ALIMOODTPDT I
V-1143) V-2 Ij
RIGHT CHANNEL ID A X 7 SOE ITS T- I
nay
C -a? 11 , : :
NMI SP - I
"
-
14
TIZ:P 2503
SW - 4 SP -2
C04,0,114.14,,
:-.17141AP""
-...71).p MAMIE
X o0
Non SP -3
* CoAsms "71if."717°'`
,30SOO.
12014114
120471 "Vr147;olo A.r Si IC .010 00,0
V- 3
DOERS
FO
Olorr TED AND 120.2111 max
so
LEFT CHANNEL ...,e.00s, SOP 4.
CON40001.
I I
RECORD 4.080 3V
UV. 31.11/0M-....-4-.7
CHANGER
r5 01
OPit.CA047;
.11164 11P-1
ILILLL
mac.AA.
s-S
1337
12 VIK
SOON
4.31T
SOON
v-3
(1.7114VOCA
,.III OP -1
,tal""41
MOS. OMIT. osmostaL)
o voC
HEATERS SI-I
113
vELLOof Toocle
SWOT-IY1-1`a
RECTIFIER
otTLOI.Ot MONAURAL AND STEREO AMPLIFIER BOARD 0--C
OLIO COOK O P -3
TIM. STOP
AC NOON FOR Coals. 1 1.
13.054.. 4211.1TIO
,
T ELECTROLYTIC -)/(4 CHASSIS 120473-0 AC
SECTION SHOWN
I. oOTE
F.1 A, - Al., [MATO 4-- CERAMIC CAPACITORS,CAPACITr IN ("POWER MONITOR')
11114 111P-
I
FON CHASSIS 120,14114L MICRO-ANCROCARADS
tor COM 41/31.
NOTE: le TOIONALI
LLSOS
I
* TUBULAR CAPACITORS,CAPACITY IN
SW .11 MICROFARADS ", CORRECT PRAWNS°, SPEAKERS
114 VOLT
AA L.1111
MGM
wrYl RESISTORS IN ONNIVR1000 OHMS/
AND i WATT UNLESS NOTED
MUST SC OBSERVET.
P-i YE
J
40
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Emerson.A NOTE
RA NO C.
MODEL: 876B
CHASSIS: 120479B [.7.1
MODELS: 881B, 883B 1::J13" 4
CHASSIS: 120474B, 120475B
MODELS: 915B, 924B
CHASSIS: 1204878 3,
.2
MODELS: 9168, 9178, 918B AUDIO MODULE ( 'B ') PART NO. 750141
CHASSIS: 120484B RF MODULE ("A") PART NO. 750140
CLOCK TWER
AigTNIrgottIT
R-9 VOLUME CONTROL ON CLOCA NOM.
ANTALLIC SNIRLD
ION -OFF, VOLUME COVII3':L rNOT uS20 ON CNA3513
ON NON -CLOCK MODELS) 00,2 1204ST1
PT MI41
CT -B 4. 34O11-1 Pm of R-2 ILA= MAIO a POr
05C. TRIMMER IN NON.CLOCA YODELS) moOLILE
1(22 0 14c.. (PT* 7501401
R.E MODULE I I
Eif CT -A "A"
C-1
VARIABLE
ANT TRIMMER KEY / v -s %1a Fr770I .-?....
....;:\ . , si '
i v.2
CAPACITOR tp.a."*"....'1.4-00 KC. vss. v -I 1
0 i
`ILL._J
;2,1
1))
1_i1 v`---.!- 4 .>) ELF,OWYTIC
T -I 41,1
r -T-.7-5-) -%-*--- ....Z'rl I /.../.<7 \
NOTE
.
Cis
AND
TOP
NTED
VARILE
CAPACITOR1
L-2
,t-1,%,
t 1
T-11
3 r-r---ni1& -r-rt 4
I RP
Z-;: I
"A" ,:.1
co's-cl
E'YO0LE V2i C TO. I
LL,r,4-) . Il
P21000 t 1-..-is-,-*-1
I 1
AUDIO AIN 2tN.1.0.0-,11, n
APPLIANCE
OUTLET NOT ON NON -CLOCK MODELS
a
POWER
TUBE LOCATIONS AND ALIGNMENT
MODULE ETCHED PRINTED CIRCUIT CHASSIS
----I
.. D212001,..o.c,a rD.C. 0o182,.1.
oNvIPTE
V -1 V-2 V-3 V- 4
1213E6 e, 12 BAR I2AV6 5005
r it
vP
T_
I T-2 I -- 12 A T6
r, 1
I I
#L-
L I st I
F-1 T L
j r
52 55C EL
n2e2 r6
0. T
4I
r". _ _J
sr r
V-5
35W4
,
\\ Soo,
v
1,5rC
f v.,
2AV6
T10NAT2 AC VORiNG.
COCK YODELS
\ SW -11
SOCS ,rRAG
r..
431E6
ac
HE ATERS
L N!--+ P -1
5- AAA IN 0.00. 7.1.4 _EC T00,vc CAPACITORS
P -I AL- CERAMIC CAPAC OPS.CAPACiTr IN MICRO- ANCRORA1100
AC WINING.
1S-2 NON -CLOCK EIJLN C..,01.3.CPAciT3 IN 141CRofRDS
MOOFIS
055 5- RS 'N -_NMS IA 1000 am!, AND I WATT
UNLESS NOTED
S Yo -2 V-6 CRC. ES DES'GRATE R SEAS
N N IPCO,LES G 3
- !FR v
v AC ON
AO CPS
CHASSIS NO's 120474,475,484,487,
120 479
41
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
GREEN GAMBLE-SKOGMO Coronado "66"
BARE 3 BARE CK 879 Model RA48-9903A (43-9903)
OSC. COIL
VOLUME
01 5 4 YELLOW CONTROL
C
CK879
7-1
L -I
5
2N485
C4 L-2
1
61-y 44.
R2 R3
IK
E
Of C 1
s2
-3
r
1C-4
C9
R-1
R-7 R-14
2.2K 10K 9 VOLlj
-4erb- ee°=111 +
SWITCH
R -II VOLUME CONONTROL
10K
CHASSIS
TUNING CONTROL
GROUND
BATTERY COMPARTMENT I. F. 455 KC.
1500NC 1650KC
C-2 C-4
T
VOLUME CONTROL
GAMBLE -SKOGMO Coronado "88"
Model RA48-9905A (43-9905)
SWITCH ON
-8 VOLTS RIB VOLUME CONTROL
40e1
VOLTS
C -I9
R.9$
*cm
R-3 R-4 100MF
R-13 R-14
+Ilo VOLTS
IRK 680 -62 220K$ 68K
R -16VOLTS VOLTS
82K
5% R -I9 EARPIECE
A
JACK
220K
ce
05 C-20
005
CK879 T-4 T-5
2 2 7;
01
qc:rie
2W o
632
I Rie
RIO 101( C SPEAKER
I
CONTROL C-17
50W
C5 -76 VOLTS
05 R-7 kll RQ R-17
I5K Q2K 620 ISOn1 ion Ion
RI
68K
VOL OS 59K
V R2
196
V v vv V
5% Since this printed the
Schematic was
GREEN
RED -2 OSCILLATOR the following Resistor changes have been
COIL made: PART NO.
I. F. 455 KC. YELLOW-
WHIT4E BARE
R6 180-189 2200 ohms 10%
Rll 180-190 10 K ohms 10%
'4\ 1000 ohms 10%
R12 180-186
42
STEP 112
VI ADJUST FOR V2 V3 V4
124 26 128:.6 2Av6 5005
MAX,4455KC F AmP. DET-AUNOAMP OUTPUT
C
I
r--
,Evt
OOV 6 6 50w 105 V T3
85V ;
t 5
cl
5
IC 4 1
15I 1 1=,C7 = -- 012
2 n
I 6 85V 200n
I
C2 23C. 61 23n:
233: C9D 25
zz 03
5000 I'D
I 220
85V RAC 1
CIA, -1(- R4A
22 470K
.1 6.8M
\ I1E1 2.2M
C9A 1:R413 R5
\,_- R2 2000 180
t 470K I
C98
1 2.2U
STEP 4 \ - 3 !
400
ADJUST FOR MA 2 R6
@I500KC WHILE 15
ROCKING GANG. C1C 1500
L2
2.C6 63 GIIA- LS
STEP 3 .05 500a (2) e RM. SPEC'S&
ADJUST FOR MAX. VOLUME 3.2a6s1 AT 400n)
@1620KC GANG CONTROL CII B
FULLY OPEN
V5 5OMF
ALIGNMENT 35W4
UNLESS OTHERWISE WJTED RECT
SET VOLUME CONTROL AT MAXIMUM.
CONNECT OUTPUT METER OR SCOPE ACROSS VOICE CAPACITORS MORE THAN iMMF
BOTTOM VIEWS
COIL .,.- CAPAC TORS LESS THAN iMF.
_CIO
STEP
I a 2 - SET SIGNAL GENERATOR AT 4554C L2 RESIST AS ARE 1,2 WATT.
WITH RECEIVER TUNING GANG OPEN. USE 05 5 K100C M,,000,000
CAPACITOR TO COUPLE TO GRID
II DC VOLTAGES Cg) 117 V LINE TO 110 V
A 0
INDUCTIVELY COUPLE SIGNAL GENERATOR TO B - WITH 20.000E1/ VOLT METER.
RECEIVER FOR ALIGNMENT OF OSCILLATOR AND
IF TRIMMERS .13,
STEP 3 - SET SIGNAL GENERATOR AT 16204C c
WITH RECEIVER TUNING GANG OPEN 128E6 128A6
3 P1 1216 SOPCS
STEP 4- SET SIGNAL GENERATOR AT 15004C. V VERSION "ErvERSION 0/\3 3 4 5$.4
TUNE RECEIVER TO 15004C ON DIAL (SEE 105-120V
GROVE STEPS I AC OR DC V3 V4
- V2
12AV6 12BA6 I1AU6
V 7
"B"VERSION 12 8E6 85V
--...---
SI 3 4 4 3 3 4 3
ON R3
- 6 85v
-I
The "A" and "B" versions of this set differ in
2 the oscillator -converter circuitry.
CIA T 1018
10-255
"Fa. -12
7_
TO REMOVE CHASSIS
To remove chassis from cabinet, remove cabinet
STEP 4
back. Unsolder the output transformer leads from
ADJUST FOR MAX tne speaker. Remove the four hex -head screws at each
AT 1500 Kc WHILE
ROCKiNG GANG. corner of tne chassis, and tne single hex -head screw
8 Of), L a
8 below the tuning capacitor. The tuning knob is
CICI. OD RI
captive knob and remains in the cabinet front.
STEPS 511 221,
0,12 7- 042-* After removing volume control knob, close tne tuning
ADJUST FOR WAS.
AT 1620 KC, GANG capacitor to prevent any possible damage to the
FULLY OPEN.
plates. Remove chassis by holding tuning knob with
one hand, while grasping tuning capacitor by the
tnumb and forefinger of the other hand and pull.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
GENERAL ELECTRIC MODELS T -140A, T -141A
TO REMOVE CABINET BACK trol shaft.
The tuning knob is a captive knob and
remains in the cabinet front. Unsolder speaker leads.
Place cabinet on end using a soft cloth to protect Close the tuning gang to prevent any possible damage
the finish. Insert a screw driver between cabinet to the plates. Slide one hand under the printed
bottom and cabinet back next to one of the slots in chassis board placing the fingers over the front
the cabinet bottom. Turn screw driver, forcing tab edge. Slide the board back out of the grooves on both
on bottom of cabinet back out of its slot. Repeat ends, simultaneously removing the tuning gang shaft
procedure with other tab on cabinet back. Slide out from the tuning knob.
and down, releasing top tabs from top slots. When replacing the chassis, close the tuning gang
and line the flat side of the gang shaft up with the
TO REMOVE CHASSIS flat side of the tuning knob opening. Place the ends
of the board in the grooves and push on the edge of
After removing cabinet back, remove fishpaper the board, not on the components. The tuning shaft
chassis support. Then remove the screw on cabinet will enter the tuning knob and the front edge of the
bottom holding metal chassis support. Pull off loud- board will seat itself in the grooved bosses inside
ness control knob and loosen hex nut on loudness con - the cabinet front. Replace the board supports.
TO VOLUME CONTROL
TO ANTENNA LI
TO INTERLOCK TO VOLUME
CONTROL
AZ"
WI
STEP 2/ VZ
'*e. v3 V.
.2 Ave
Of
4
COI0 - rt OR
4
it ,
t riF 4
1 *k " "I
,., ra -- ..Ar
et, . A/ SI MS Om
C- L 4
itn :CC RI.TRR 13.1
irt - SE S. at 1.,O,Rt
1r.1 Ittfemr ,G WC
v5
60,0. [11 lal
[ 15*a
CON
Ron. )666 SO. 111Ra
11
(4-KV Vat
\477-.1*,
9 4Tet IMP( OR Ot
44
r
V4 V5 V6 V7
OPEC 1-011- AVC
VI V2 AM IF T6
112AU6 AMT CONY 330 2 ND F M IF I.
DISCRIMINATOR,- - ...
I
FM RF AMP FM MIXER 12846 so I. 12.11 .AT.E6R 50.4 10 7 -: 1/219T8 TP ,
RC NETWORK - 6AB4 -"v"' 4
!
10000 V SPECIAL 68J6 I
70V 1125 ---'
NO. 113A7033-2 500 80 V 455 NC . 7V - R13- 7-
5 C620 E
2V '.X) 0 V 70011
C2 5 0 v1.11---' 6 70 V ® EI ®
C5 6 020
1.0 RF I ao 5V 7 80V
3 FM 0
CIA CIB I 5V7
R2 C13
TI LIF T
C8
500 IL__ -01 ® _
0 C9
C23
I 005 2 11
H-
C7 T5I3'
=15 M7.
L_ _J 220
L _J 812
RC IETWORK
10,000 V SPEC AL CI9 1511
MQ 113A7033 - 01 R7
V3OW 680
V3 R16 z 16
'2001/2 12 AT7 R9
In 12 AT 7 C29 FM OSC
4711 PRINTED CIRCUIT,
AFC OV 3 :
/ LA::
r..
6 C 33 nyi L 7 _451;
47 . 7V e' AM V8
0v
/
A.Y.ANTE NM/
R2I
470Kle
1_ T V7 35C5 POWER AMP
2 21/11
'" c'"°" 1/2 1978 .120V T
O7
22 AUDIO AMP
C60 <C R20 C
RI7 ,R1- 8 C32 OSC 200o 220K R33 C62 046
IS .01-7, 50V
100 020 C 36
T000 I
005
C 37 TAPE / PHONO C4 C45
001 <> 6
000 *23
L -=---AFC COUP ATE O 2 -7 LI/
MEG
C 31
0:1,7 _1,012
100K L
C3 r-- 6 R26 r 28
V0300 RI9 Q;R 4708 5V
R24 R27 30
TO REMOVE CABINET BACK 4.714 47011
EXTERNAL AUDIO
SPEAKER C OUPL ATE
1. Loosen FM antenna screws and remove FM antenna.
2. Remove 4 screws fastening back to cabinet. _a_ C475
swings clear of D34 76
3. Pull interlock plug until back wYJNIFO
cabinet bottom. 105-120
AC OR DC C 55 R3 V C475
4. Slide back downward in grooves and remove from a-101
.
- 801111FD
22n. 150141A
cabinet. 140.v 52 ON 2W 125V
00 1 VI V6 V7 V3
vs V5 V4 V2
MA< 1978 12 AT7
()OE) FM ANTENNA 35C5 128A6 12 AU6 1 SBA 6118 4 12ALI6
TO REMOVE CHASSIS 250V LS LIO
4 3 4
1850 13130
1. Remove cabinet back as detailed above. 11346326 58 =°°' 001T001 poi 001
Remove four hex -head screws on cabinet bottom. Au010 COuPL ATE :1-36c: 327.:L
-=C49
_
T
C5LOS2_1_
C54 C53
2. L._ ___ 156_1:C5764
3. Remove hex -nut fastening antenna support to
oa= 4 =
PILOT LIGHT BOT TOM
speaker mounting bolt. II 1628 BOTTOM
4. Remove knobs by releasing captive clips from ®® 16
0 III®® 10 0 ®©
shaft slots with a long narrow screwdriver. O O
5. Swing chassis out and to right to troubleshoot. NOTE: NAND ANNAN IN MUM ______ ME MITE,
FROND P SUTTON A.L 11. 4110*.
(o o)
DOLTAGIIII TAMA
.1.11MIT San TIMM I3 A 6830 (.0 0
TROUBLESHOOTING a AN 0531TIGN
ITN, LIDS NI111 AFC COUPL ATE
GOTT0m BOTTOM
To test the FM oscillator, check the grid bias T5 T L2-5-4
that 2
voltage. A voltage of ..7 VDC will indicate po9
the oscillator is operating. With the oscillator START STRINGING la ,o4
'.7)
operating properly, the RF can be checked by attach- WITH ONE COMPLETE
to the antenna terminals CLOCKWISE TURN
ing the signal generator AROUND THE DRUM
and checking the output of the RF stage for a de-
flection on the -3 VDC scale of a VTVM connected to
pin 1 of V4.
GENERAL ELECTRIC
DIAL STRINGING
Correcting trouble in the RF requires care due
Models T -150A, T -151A
to the critical values of coils and lead dressings.
STEP 4 OSCILLATOR COIL STEP I
GREEN STRIPE F B RE ALIGNMENT
ADJUST FOR MAX AT ADJUST FOR MA TRANSFORMERS OUTPUT TRANSFORMER
600 KC ROCK GANG DENOTES KEY SET VOLUME CONTROL AT MAXIMUM.
AT 455 KC BOTTOM
VIEW O I
CONNECT OUTPUT METER OR SCOPE ACROSS
20 VOICE COIL S PK R
BOTTOM 5 6() INDUCTIVELY COUPLE SIGNAL GENERATOR TO 32n A T
VIEW 4
IF 30 RECEIVER
400
C3 TI, T3,8 74 T5
V5
18 V2
VI TI DE T. N AUDIO POWER OUTPUT
OSC -CONY
R -F
r -- 12 BE6 12 AV6 35C5
12 BA6 90V1 ® o4: _1(3 45V 12,3V
W 7
5arli: C 470 6800
0-12 CS
I- 6/
90v2:
6 11131 C 16
5
7 LOC100
- -- [1191 6V II
TD R9 ,C22
2
IRO
2 4 RA
CENTER
PIN CII
CIA 4700
R4
272
0-12 100 ISO
R12
150
R11.-
47011
53K RIO
CI4 470K
3 K 022
7
C121( 220 RADIO
AVC
RS CIBB
2.2 N
SOME
2M
13 -BUS CIBA
V LU
900
STEP 3 STEP 2
ADJUST FOR MAK ADJUST FOR MAX
AT UNLESS OTHERWISE NOTED
1.500 KC AT IWO KC
ROCK GANG RECT.
VOLTAGES MEASURED WITH 20,000 OHMS 35W4
PER VOLT METER AT II 7 V liAZDA
NOTE: REPEAT ALIGNMENT STEPS LINE -NO SIGNAL
IF NECESSARY $12
RESISTORS IN OHMS -K 1000, M 1,000,000 RI5
129V
,,,,,,,RsfLESS THAN ONE ME 117V
II MORE THAN ONE MMF AC 4 0
RESISTORS ARE I/O WATT UNLESS CI5
OTHERWISE SHOWN 047 V2 VI
V4 V3 VS
121/6 128E6 12BA6 12 A6 3505
DIAL STRINGING 3 4 4 3 4
12 VAC 24NMC 36 VAC 48 VAC EIS VAC
INTERLOCK
105-120V -
60AC
-'AC -
) ON -OFF
SISW
ON R8 TO REMOVE REAR PANEL
Pull down slightly on cabinet bottom with one
hand, while lifting bottom of rear panel up and out
with other hand. This will release the bottom lock-
START ing tabs on the panel from the slots on the cabinet
bottom. Then pull panel out and down, releasing top
locking tabs from top slots.
FINISH TO REMOVE CHASSIS FROM CABINET
1. Remove rear panel as detailed above.
2. Pull out volume and tuning control knobs.
3. Remove four screws on cabinet bottom which fas-
ten the chassis down.
4. Remove two hex -head screws fastening control
GENERAL ELECTRIC Models T -155A and T -156A panel to front panel.
5. Unsolder speaker leads.
6. Slide chassis out to rear.
STEP 1R2
VI ADJUST FOR V2 V3 V4
BOTTOM VIEWS 12AU6 MAX @455 KC 126 A6 12AV6 5015
CONV I -F AMP OE T - AUDIO AMP OUTPUT
L2
1010 rit ARUM ----Tr-- -7
, \
I® HI UI ®I 50y 102V BLUE T3
Okt)C0 %
C2 eC51 Lt7 5 call
22 -- 2 1"23(C :230" I
COIL
L2 OSC0. 6 I 1230: :43r1" 5000 200(1
I 2,
C4158 C4ISC I I(
I
11-283
®
I "
L®___ Qi ik
R
0
CIA 7 85V
CENTER PIN RAC
LI GRCAJNDED 470K
1111A/VV-IP
6M
I
BOTTOM VIEW R2
2 2M RAG
I T2000 470K
400C98
STEP 4 \ R6 3.2oHm AT
II I® 1500 400,o
ADJUST FOR MAX. 2W 4" PIA SPEAKER
@I 500 KC WHILE c1
ROCKING GANG. ci,
L2 R3
TI a TO 11;
1)#! - C6 LOM
STEP 3 047 CT
ADJUST FOR MAX.
0-12 L__ CVOONLTURFAEOL
6)1620 KC GANG
FULLY OPEN. V5
CIA 35W4
PHONO 047 RECT
INPUT APPLIANCE POWER UNLESS OTHERWISE NOTED
RECEPTACLE INPUT
CAPACITORS MORE THAN I= MMF
Hakim CAPACITORS LESS THAN I= MF C IC
117
RESISTORS ARE 1/2 WATT (NOT18
s ,.E' TS)
7
K=1000 M = 1,000,000
DC VOLTAGES (' II7V LPJE TO 8 - MAZDA 110V
1ST VERSICAB
2ND WI T H 20,00011 / VOLT METER #44
I -F I -F "C"VERSIDNi 63
V3 VI V2 V4
ANT J2
OUTPUT GIB -4D CIA
PI
TRANS. _1_42X16.4:___(T211
V3 V14 3V2 V44
T3 OSC 105-120V 12AU6 I2BA6 C5 CI°
CID -4) 12AV6
GIG
60-AC ONLY
TUBE A TRIMMER LOCATION 4 3 3 4 3 4 3 4
12 BE6 VERSION)
0
OSC - CONV
0m
VOLUME CONTROL TUNING CONTROLU I 85V r- 1
I
I-
MI
- 1
1
1
1
1
6 85V
L_
CLOCK MOTOR
ALIGNMENT 6 c4
c,-1 SWITCH
SET VOLUME CONTROL AT MAXIMUM CIB
CONNECT OUTPUT METER OR SCOPE ACROSS VOICE CIA
COIL
STEP 18 2 - SET SIGNAL GENERATOR AT 455KC
I -12
WITH RECEIVER TUNING GANG OPEN USE 05
DIAL STRINGING
9
CAPACITOR TO COUPLE TO GRID TO ISO
INDUCTIVELY COUPLE SIGNAL GENERATOR TO
1422871
RECEIVER FOR ALIGNMENT OF OSCILLATOR AND
C2
RF TRIMMERS
STEP 3 - SET SIGNAL GENERATOR AT 1620AC 47
WITH RECEIVER TUNING GANG OPEN N
STEP 4 - SET SIGNAL GENERATOR AT ISOOHC, B
TUNE RECEIVER TO (500.(C ON DIAL ISEE A
2 1/2 TURNS
R1
ABOVE STEPS I C1C c,
22K
T Sri TUNING
10-112 0.12
SHAFT
90.11.
GENERAL ELECTRIC N VOLUME s!'
L2
CONTROL C5
STEP4 SHAFT
Models C415A, C, ADJUST FOR MAX STEPS
AT ISOOKC WHILE
C416A, C, C417A,C ROCKING GANG ADJUST FOR MAD.
AT 1620 KC, GANG
FULLY OPEN
STEP 5
AT ADJUST FOR MAK
[ADJUST FOLK
600 KC FORMAX,,ANG _I AT 55 KC
[
TEP2 STEP I\
C3
VS
V2 V3 DET.
I AUDIO POWER OUTPUT
VI OSC -CONS I -c
r -T- 126E6 12 BAR 12 Av6 35C5
R -F
12 BAR 90V1 0' 90V 90V I
E- V 4,v 120V
c2 I.5an ITI,0111 101 X2211
CIF 220 7 6800
1001- OH j I mo
,
CI9
6
NOV 813
6 0_,
m
90,10 130 0
- L__ - _J 7
1_ 914
7V CENTER
PIN CII
RI 4700
R1 4706
CC R12
120
ISO
(1004.
ON 331,
SETS)
024
C2I
-.047
R5
C121( 220
AC C
PHONO
RBRADIO +- CIBB RI7
2.2M 43
NOT ON RI 41.1 CT S3 1800 2200
SOME /22 IP-- OR
SETS -BUS CUBA
VOLUME NORMAL BASS 4700
STEP
ci:OMF
Wie P C20
ADJUST FOR MAX Tos 100M.1,047
AT 100
5 KC B+900 R16 RIB
ROCK GANG --I STEP 5 RADIO
6200 OR 156
ADJUST FOR MAX 100
AT
FHONO Si ON FN
1620 KC V6
36 RECT. OUTPUT TRANSFORMER
DIAL STRING OSCILLATOR COIL UNLESS of HERWISE NOTED lk
SAIDA 55W4
GREEN STRIPE 000
5 6
DENOTES KEY VOLTAGES MEASURED WITH 20.000 OHMS *12
PER VOLT METER AT 117V.
POWTE LINE- NO SIGNAL 129V 00 ,S
117V
* On 15 T
RESISTORS IN OHMS- 61000, M 1,000,000 AC 4 3
6
LESS THAN ONE MM ^ "47
TURNS TO FINISH CAPACITORS (MORE THAN ONE. MME V4 V2 vI S
BUT TOM 12 12g6 35CVS
VIEWS ,
IF
RA/6iz\a_126E6
12 VAC
24 /AC
jw1213A6
36 MC 48 VAC 85 VAC
8 RF
TRANSFORMERS INTERLOCK
3 TURNS 0
START STRINGING UNDER WINDLASS
2© 60 -AC _
0 6 50 HD5-1200p a
4 30 JI
T-
i-
S2
-8
L_ J
CLOCK MOTOR
8 SWITCH
VOLUME R-20, MOST-OFTEN-NEEDED 1960 RADIO SERVICING INFORMATION
, ELECTRIC
GENERAL CP
(1(._
SPECIFICATIONS
MODELS C -430A, C -431A
CABINET: C430A Antique White
C431A Pink TO REMOVE CHASSIS
ELECTRICAL 105 - 120 Volts A.C., 60 cycles Remove tuning, volume, timer, and time -set knobs.
RATING: 30 Watts Then remove five hex -head screws on cabinet back,
and four hex -head screws on cabinet bottom. Unscrew
POWER Undistorted: 1 Watt four Phillips head screws to remove timer. After
OUTPUT: Maximum: 1.5 Watts unsoldering speaker leads, pull chassis out slowly.
Leave leads from chassis to timer attached for A.C.
SPEAKER: 4", 3.2 ohms @ 400 cps power while troubleshooting.
40.1TFOR
Owl MAME
Vt
121E8 en.'
010.CON. V2 V3 V4
MIAMS !SAVE 5003
1-F A P DET. WOOD AMP OUTPUT
r- FL- -1
I OE
le13
I MI 02
CIE I<111
5000
10-22er O K 3
o m
115v
I
,_L556116.7.' 1444
AwefITOR
I =X. ,la
ATOK I
1 (DI 28
L 2111
321
10-112 TOIE 400
SL, Coll 26
7
P3
TAT.:
STIP 0011-AW C.A
CONTROL
ADMIT PO* NU. STEP 3
AT 11100.12 V5
ROCREE SENO ADJUST MR NAN ssw
AT IREO RC_ SRN. WILES& OTHERWISE NOTED FmcT
MLR MEN CAPACITORS ACRE IRAN IT INF
CAPACITORS LESS TnANI MF CIO
P804 T ClIC!?1l3
PCSISTOAS APE in SUIT
101000 5.1,000,000
DC vOLTAOESID 11TV LNE 10 A -
WIT N zopoon VOLT METER r2°' *110V,
LIONNENT 63
Et, VOLUME CVO.. T ARIN.
AGOSS VOICE COIL.
INITON VIERS PIDUCTIVELT COUPLE SIEIRAL OINERAT011
TO RECEIVER.
99 VI T.
4
LE
0
STEP IS - SET 3.0 OEM. T 435
InTN RECEIVER TM/NO 114. OPEN.
STEP S. SET 510 GEN AT E0 ilC,
NMI RECEIVER TUNING 0R4 OPEN.
STEN - SET NS SEN AT 1500 ITC.
105-1200 D
SO -AC ONLY
rt
if
4
V3
3
VI
3 4 3
V2
4 3
VII
( ) TYNE RUMEN TO 1500 RC
MODE LS
r --
I
C-430 A
DIAL STRINGING
L_'
CLOCK MOTOR
C-43 I A
a SWITCH
Tube pin Resistance Chart
PULLEYS 1 2 3 4 5 6 7
120E6 22k 0 12 24 1500* 1500* 2.7M
128A6 2.7M 0 24 36 1500* 1500* 0
2I/2TURNS 12AV6 6.8M 0 12 0 500K 0 470K*
/TUNING 5005 150 470K 36 75 470K 1500* 200*
SHAFT 77 77 75 103 100 100 20K(Min.)
35174
VOLUME
CONTROL * Measured from pin 7 of V5.
SHAFT All readings unless marked
ere from locket pin to B-
C> PAnt.
49
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
GENERAL ELECTRIC
TO REMOVE CABINET BACK
1. Remove time -set knob.
Models C -450A, -B,
2. Remove two screws on bottom fastening cabinet C -451A, -B, C -452A, -B
back to cabinet front.
3. Remove screw above appliance outlet. FINISH
4. Disengage two snaps on top front of cabinet by
exerting forward pressure on top rear of cabi-
net until bottom of cabinet back comes loose.
5. Pull cabinet back out. START
TO REMOVE CHASSIS
1. Follow steps one thru five as above.
2.
3.
Pull off knobs.
Remove four screws fastening chassis
bracket to cabinet front and bottom.
mounting O 19.
120037 40*
4. Lift chassis back and out. KV AV 4341434 POINTER ON
1600 KC
vi 82 Vl 84
28(6 12 BAG Q.6 SOC r
err r
95r
1-e
A
11- -Yr4
12 s
259 7,4 -7 4.1
1
1 -Z
co, 7-
04-
12.912
4/,'T 4 a
'--0,..22 :Z7;7'
kto.,
r - -
66.
u42.252 T. No.. 434,30
10 ME, 4.41
S.113[1441k
O 1.3.
SI I 414.
,34.4
GEN AV
op,
455 4C
cc a
341.4 SC 900 42%
1.922tre 41.4.2 44. orr
4.4[ 022,000 41,/.a I
Vt SI SIG
root 922919921 r0 kr00
Soo .< Dana
v
113441 .43. 3,44 430 143. 35W4
.9 10 V ;Z -1A1-3 .44
60,4., Al v -.4
SC CO,
Ong* 1111.
OM". 0.
TO ANTENNA LI
TO CHASSIS MTG. TO SPEAKER
BRACKET /77177
TO CLOCK SWITCH
TO
-1 7 -
RADIO PILOT LIGHT TO CLOCK TO VOLUME CONTROL
FIELD TO APPLIANCE OUTLET
50
NOTES
I- TAROS OTHERWISE NOT En APACiTORS TROUBLESHOOTING CHASSIS REMOVAL
MORE THAN I MY.IF CAPACITORS :FIG, THAN I AFF
RESISTORS ARE G WAY I K.1000
The total radio battery current drain should al- 1. Remove two screws from cabinet back, lift cabi-
2 VOLTAGE AND CURRENT READINGS ARE
AVERAGE UNDER NO SPNAL CONDITIONS VOLTAGES
ways be ascertained before proceeding with the serv- net back off.
ARE POSITIVE WITH UISPECT TO 6001190
To measure the total radio 2. Remove four screws holding circuit board to
3 -VOLTAGES SHORN IN T= ARE FOR PRP icing of this receiver. cabinet bosses (do not remove the two screws
TRANSISTORS :N TRS AND TR6 battery current, unsolder the red lead attached to
4 -REPLACE WITH TRANSISTOR TYPES SHOWN the + terminal on the chassis side of the battery that secure antenna holder to circuit board.)
5- TRI 14 R4 compartment and insert a milliammeter in series with 3. Remove volume control.
21005RA 478 3.9E 4. Remove output transformer from speaker.
MOOD 566 3914 the lead and + terminal. The total current drain Carefully lift chassis board out.
5.
44000 OSP IONE should be between 12-18 mils. All current measure-
6- TRO R7 ments must be made at quiescence with the receiver SPEAKER REMOVAL
2N94 -I32 68R turned on, volume control at maximum, tuning gang
0194-342 11214
closed, and with no signal conditions. 1. Remove cabinet back.
7- FOR NPR 71/5 IS IRS
An excessive current reading may mean a shorted 2. Remove two screws holding output transformer
AT SORER 13 YELLOW LEAD (10 TO
transistor; no current will indicate that a tran-
POSIT 'A.' mounting plate on speaker.
14 IOLLIER '17' SIDE OF R22 TO 'e sistor, associated circuit component, or a battery Remove antenna holder from circuit board.
3.
C- RIO RUST BE 100 THERNESTOR. is defective. 4. Remove clips that secure speaker to cabinet
D- RIP OUST BE 2.2K. NPN TRANSISTORS
bosses.
BOTTOM VIEWS J COLLECTOR
FOR PUP TWO II TRW 5. Carefully lift speaker out.
BASE
A- SOLECR "(/' NOE OF 14E2 TO E-EMITTEP EMITTER
B- BASE
B.- SOLDER 15 YELLOW LEAD 00 TO C -COLLECTOR
PNP TRANSISTORS
POINT
I.F COILS 05C COIL ALIGNMENT
RIS MAT BE 2.26 (.!__13) J COLLECTOR
C BE
RN MIT SE 100 THISSIISTOR. BASE LI SET vG. JME CONTROL of MAXIMUM
Mitt CO EMITTER
CONNECT OUTPUT ME TER OR SLOP) ACROSS
ADJUST FOR VOICE COIL
MAO AT 1400KC QB 3
PROLE ROCKING GANG]
CB INDUCTIVELY COUPLE SIGNAL GENERATOR
ADJUST FOR PEA AT 455 KC 5
STEP 5 AT 580 KC TO RECEIVER.
WHILE ROCKING GANG ACT RUT
STEP 6 STEP 3 STEP 2 STEP I BOTTOM VIM
4.3V -CO 50F. IN
3.6V R5 4f. WED MATTI:NT UNDER MODAL
CO
470 USE 410-751410.
.0
RISME100757RM 1141-
C (PEE E a)
RI
(SEE NMI 5) ON AUTO
R4 TI
(SEE NOTE 51 TR 3
(SEE NOTE (I) TO
TR I 2100 NN
MISS 501(
(SEE MOTES 4 115) L2 2E121
3
TR2
(SEE NOTES A B 6) CS
-.rte CO
ISO
3
rn
TEL
NV R22
.IV 3.3
.3V
Tt
04?
a
CO P.0
SLUE
.SV 1.51M ADJUST 1. TM RN TR 6 RIS
FOR 470 (SAME AS
mAy AT 4,3/sF*. TR5) 330
STEP 4 420KC RD 4.78
GANG 20%
OPEN 14(3
.71lA
CO &TR S
ENE 6V
CIO
BSI
.06
R2 R3 IBA 148
IR
j S
CI I 108 8)8
S RIO RI2 ,11
04 53
1410 108
CLOCK BATTERY LI -nsige
L
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
GENERAL ELECTRIC Model C -460A
ASAIST Poo
max AT S At
VI
rt. V3
i2BO6 ..0 24V6
IC.
Pr.
9-
SA
0.2 012
ACROSS VOICE COIL 1.011.ASS OT.C4InAl OCKITLO OU TW
PDYCTIALLY CPAPLC SIGMA GAIIRATOR
CAPACAORS iOAS TrIAM
TO IRECCIPCN,
STU' I ACT SM. ALP. AT ASSC, CAPACITORS LASS NAM
RESAIORS - . AC400
IOW MOT
POTR mectioLO TWINS SPFTS OPLO.
STEP ACT SOS OM PT 410 .
ROTS REMAIN TUMOR POOR OPIN. POI.TASES ATV AOIS TO S-
0/20.000 11/ACA.T RCMP
- ACT OPIL AT 11001M.
TYPE PULPIER TO 1000 RC.
VS
mow .00 .2oco soco 4" 35W4
MS..V
SC COIL GO,AAC SS.0 AAC
OAT
DESSTIROT
DEMOTES PET
0-00
Cr= GANG OPEN
TO REMOVE FRONT PANEL
4 TURNS
1. Pull off clock control levers.
2. Remove volume and tuning control knobs.
3. Remove screws fastening front panel to bottom of
cabinet.
4. Lift panel out carefully to prevent scratching I TURN
crystal on control shafts.
FINISH
TO REMOVE CHASSIS POINTER ON
1600 KC
1. Follow steps one through four as above.
START
2. Remove two screws from top of masonite board and
third screw beside line cord interlock.
3. Unscrew clock -set knob.
4. Unsolder speaker leads.
TO ANTENNA LI
TO T 3 MTG. LUG TO CLOCK SWITCH
171 1.
48 ?
TO
T3
:Po
011) I
41
Coi:0211111hmor emill1111*
ktr
:19
ALI r:
ON
TO RADIO PILOT LIGHT TO INTERLOCK TO VOLUME
CONTROL
52
ADJUST FOR MAX 455KC RADIATED SIGNAL]
VI V2 TEP
V3 V4
I -F AMPL. OETECMW AUMODEMUT
PEAK AT ISOOKC CONV-OSC. 344
IRS IU4 r IU5
HILL ROCKING GANG CB 90 V
90 V 20 WA LS
CI 4
STEP 4 2 C12 -"^.002
3 .55 0
RREEN
4 0 900FED
4" P14
RIO I RIM 3 2 - AT
7 IM
ige R3 CI3C 3.3M1
150
I 7.5V 4CC ti
NmAN. 0136 IV
RSA 15K
11 GA DOK 4 mi
C2 = IF; 43. 01 4-
61
47 - -4
R2
220 +1.5V
14
COEWm43
L2 I
PEAKI 1
AT CIO CIC70 L
cic RS
16 10Kc
+ 90V ONLY OV
4 C15113
/ CRCLED NOS ON ABOVE K 40MFE
TLA T2 GOPIR .or
ARE R51526 LEAD NOS
\ R6
II, - C ISA
3.3m a 1 400MFD
R7 R12
I im 2200 ROOMED owlf
.0C35
C9 CIO VOL
I oR .33 ON .01
.047 a- .22 ON 3
41111%
or TOM VIEW COLON STRit
SI ON R] CI5C _
"A" SOMFD
UNLESS OTHERWISE NOTED IDOWD
3 mAM
K 1,000 PA 1,000,000 2450
Formai vier PLUG ACTUATED IOW
CAPACITORS MORE THAN I. MMF
CAPACITORS LESS THAN I. MF SW ITCH 45-55 MA
S-2 2 POSITION 7.5
RESISTORS ARE 1/2 WATT
SEL.RECT RM RI5 AC DC 4--0 BAT. 0
ALIGNMENT 2200
-
GB
SET VOLUME CONTROL AT MAMMON 4W
CONNECT OUTPUT METER OR SCOPE ACROSS 3 5
IW.047
vOICME COIL
OuCTIVELy COUPLE SIGNAL GENERATOR TO
RECEIVER PLUG SLOTS THIS SIDE
STEP 13. -SET SIG GEN AT 455 KC. WITH ./1
200 A. FUSE
RECEIVER TUNING GANG OPEN.
- SEI SIG. GEN. AT 1620 KC, WITH SLOW BLOW
STEP
RECEIVER TUNING GANG OPEN ,11<r" 01 B4- 123V
STE P - SET SIG. GEN AT 1500 KC
CHASSIS REMOVAL
- TO 90,1 BiLJNE
TO113
SI OR R t The chassis is easily removed by means of the
R13
/PLUG ACTUATED / 4IPMAY-44
following procedure:
SWITCH
5.2 7 POSITION 2450
014 RIS IOW
SE L RECT AC DC 4-11. BAT 1. Raise up handle and grasp edge of top cabinet
----(4--(A)ON).---W-40-V \f,1 ]5V
GB 2200 front with one hand and cabinet with other hand.
Pull firmly to open cabinet.
I
C 16 id,
I 047 2. Pull tuning and volume control knobs straight
A
200 M A FUSE off control shafts.
SLOW BLOW PLUG SLOTS EMS SIX
3. Remove the two small Phillips -head screws from
B+ I23V
the top rear edge of the metal chassis mounting
B" VERSION POWER SUPPLY
bracket.
VOLUME CONTROL REPLACEMENT Heat the remaining part of the lugs on the cir- 4. Slide chassis and bracket out of cabinet.
cuit board and pull out with long -nose pliers.
The chassis must first be removed from the cabi- 5. Remove bracket from chassis by unscrewing the
net as described under CHASSIS REMOVAL, then replace Clean all mounting holes of all excess solder. 1/411 mounting screw from the bracket.
volume control as follows:
Insert new control; then solder all lugs securely The power supply chassis is removable from cabi-
Cut off the three control lugs and the four on - net by removing the four 'mall hex -head mounting
in place.
off lugs. screws.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
GENERAL ELECTRIC
A. C.
7. 5V A. C.
MODELS D. C. INPUT 7 5V.D.C.
TBO .."4
P671A,B
4".." ---TO "A"
P672A,B BATTERY
CI6
P673A,B B t TO C15C
CI6
P6748
siC/' zTO "A" XX
/BATTERY TO
(Continued from zBATTERY -
page 53) TO "B"
BATTERY BATTERY t
- TO " B "
BATTERY -
41.1 A.C. - D.C.
SEL. BATTERY
RECT. SWITCH A.C.- D.C.
BATTERY
SWITCH
SEL.
RE CT.
DC.
T3 T3
POWER CHASSIS POWER CHASSIS
COMPONENT LOCATION ''A" VERSION COMPONENT LOCATION "B" VERSION
90V.
C3 .44
CIO
C2
AfITENNA -1 ETRI
_
55V C9
TO
R14
a
RI3 7 R15
C4
/1OI4 ,TO-XX"
TI
L2
I5V 20V. 90V TO T3 +
/ /ON
POWER'"--sTO "X ON POWER
SUPPLY BD. SUPPLY BOARD.
TO "A" BATTERY CONNECTION ON
'A" VERSION MAIN CHASSIS - COMPONENT LOCATION POWER SUPPLY BOARD.
To "X"
/POWER BD.`
6
C4 L2 TO XX ON
90y 0 T3 POWER Bo.
"B" VERSION MAIN CHASSIS- COMPONENT LOCATION TO JUNG SIGN
OF RI4 B RI 5
54
ADJUST FOR MAX
-I,- --V--
SIGNAL
BATTERY LFE UNDER NORMAL LIFE 400.5001111
12-25 MA.
R4 PS TIPS TEP1 R14
36V 4.50
34v
330 ISO
TR6
I
R C13 (SAME AS 11171
RS CIO
312' (SEE NOTES 1,2,11
.3-411.1L ABBOO 047 -
390 .01
T3 PL I
C2 ___ R22 -1211A
CIS I4V
3300 C. 3-514.
TR I f-so TR 3
(SEE NOTE 41 TR 2 IEEE NOTE 41 500 91 CI9
F17 7
SYL. 1297
LI
000500
C3
01 1
63003
2N1058
4V
2
r (SEE NOTE 4)1 -
0.E.4.41113
ET. 760R
100
OVIS n
:
I
I
6V
2N293
2N314
360
13
IMO
c,,
DI
3
TR 4
SEE NOTES 3 6 /
1111151
61.4.00E421
RI7 tWE SITES
2)
2
R2I BEE No7E9 16
65V PHILCO 01577
3.6V 4
L---4_1 S Sr. ITV
CIC I. 7G
C15 , V
7:41_, 819
66KR14
CID 2.9
RIO _IV
TEP 4 CIA 4
261 4.0
R2 R3 4700 TR5
.5-)164. R13
10 ADJUST FOR MAO 700 BEE NOTE 4/
CIA 97 R9 45V
1620KC WITH SYL.1524
2200 470 EN103 I TR7
GANG OPEN
\ .
ME 4
MAKI 3
(SEE NOTES 1,2,64(
ENI0311-1 INM
GE. 4JX1E1130 (PNP/
RI6 4 ACESSOA
SEE NOTES I 8 21 /..
STEP 5
I.F. TRANSFORMER NOTES -
1. FOR NPN TR6 a TR7 TO DIAL LIGHT
0 2
ADJUST FOR MAX A CONNECT A JUMPER WIRE BETWEEN PONT'S B aa SEE PION TEM
0 5 A ac wIRM
400 KC WHILE DIAGRAM
ROCKING GANG 4 0 3 O R16 MUST BE 50 OHMS(THERMISTER).
D. RI7 MUST BE IN.
TI,02.13
2. FOR PRP TR6 a TR7
A. CONNECT A JUMPER WIRE BETWEEN POINTS A B B. ( EVE IN° PHANTOM
"
B. C D.
OSCILLATOR TRANSISTOR WZ
TRANSFORMER MOUNTING C. RI6 MIST BE IN.
PATTERNIEXCEPT NALCO
T1577 ONLY D. R17 MUST BE 30 OHMS (THERMISTER)
TI5722
3. 7577 (PHILCO) TRANSISTOR BASE LEAD MUST BE SOLDERED
INTO 92 AS SHOWN ON PHANTOM WIRING DIAGRAM. BASE
LEAD OF ALL OTHER RECOMMENDED TRANSISTORS FOR
TR4 MUST BE SOLDERED INTO BI.
BOTTOM VIEWS
4 REPLACF WITH TRANSISTOR TYPES SHOWN.
S UNLESS OTHERWISE NOTED-
CAPACITORS RPM THAN I. NW
CAPACITORS LESS THAN 1 SF
RESISTORS ARE in WATT
K 1000
CHASSIS REMOVAL - P770A, P771A 6 VOLTAGES ARE POSITIVE WITH
RESPECT TO GROUND UNDER NO
SIGNAL CONDITIONS
1. Remove tuning knob.
7 VOLTAGES SHOWN N la:1 ARE
2. Open battery compartment door and remove batter- WITH TR6 S TR7 PNP.
ies.
3. Remove screw located in center of battery com- ALIGNMENT
partment. SET VOLUME CONTROL AT MAXIMUM.
Separate front and back from bottom only. CONNECT OUTPUT METER OR SCOPE ACROSS
4.
VOICE COIL
5. Unsolder two leads from speaker. INDUCTIVELY COUPLE SIGNAL GENERATOR TO
RECEIVER
6. Remove hex -head screws holding chassis board and STEP 1,2 B 3 SET SIG GEN AT 55 AL WITH
volume control bracket to cabinet bosses. RECEIVER TUNING GANG OPEN
STEP - SET SIG GEN AT 1620 DC, WITH
7. Pull handle up and move chassis slightly out and RECEIVER TUNING GANG OPEN
STEP S - SET $1G GEN AT 1400 NC, TUNE
unsolder lead to dial light button lug: then re- RECEIVER TO 1400 KC
move chassis.
PHANTOM WEIING DIAGRAM MODELS P770A,P771A,P7TGA
TROUBLESHOOTING TI TO T3
1ST LI OSC COIL
INTERMITTENT: 2110 LE 3RD I.F.
3
A check of the battery condition and total cur- 1. Check battery contacts for corrosion.
rent drain of the receiver should be made first. 2. Check solder connections on dip -soldered side of
All current measurements are made at quiescence with circuit board.
the receiver turned on, volume control at maximum, Intermittent audio, motorboating, and poor recep- 2 KEY
tuning gang closed, and with no signal conditions. tion is frequently caused by poor battery contact. BOTTOM VIEWS
The total receiver current drain is 15 td 20 The battery terminals should be cleaned to insure
mils. This is measured by inserting a milliammeter positive electrical contact. PRP TRANSISTOR NPR TRANSISTOR
in series with the batteries. COLLECTOR COLLECTS
NOTES- RASE BASE
If an excessive total current drain is recorded,
ALIGNMENT
the individual collector current readings of each EMITTER EMITTER
SET VOLUME CONTROL AT MAXIMUM. TRANSISTOR m
transistor should be checked. CONNECT OUTPUT METER OR SCOPE ACROSS
rh4t=7-1 64
VOICE COIL KEY
SIDUCTIVELY COUPLE SIGNAL GUERATOR TO WRY
WNW 21.331, OR 3BIC
COLLECTOR EMITTER COLLECTOR 0 EMITTER
NO RECEPTION: RECEIVER alMO
STEP 1.2 8 3- SET SIG. GEN AT 455 KC, WITH
1. Check battery voltage and battery contacts. 121 BASE
RECEIVER TUrANG GANG OPEN. BASE
AFTER REPLACING TR2,
CHECK VOL-
2. Check on -off switch. STEP 4 - SET SIG. GEN. AT 1620 NE, WITH
RECEIVER TUNING GANG OPEN TAGE ACROSS RR, IF NOT WITHIN RANGE
3. Check all antenna lead connections. TRANSISTOR
STEP S - SET SIG. GEN AT 1400 RC, TUNE CHANGE VALUE OF RS UNTIL VOLTAGE
RECEIVER TO 1400 KC. BOTTOM VIEWS
4. Check coil L2. ACROSS RS IS MIENIN VOLTAGE RANGE
WEAK AUDIO: STEP 6 - SET SIG GEN AT 580 KC, TUNE
RECEIVER TO 580 KC. SHOWN.
1. Check battery voltage for 4.5 volts.
IRREPLACE IRUISIRM TYPES MEASURE COLLECTOR CURRENTS WITH
2. Check battery current. MILLIAMIXTER INSERT IF NV SERIES WITH
3. CIRCUITS MARKED 'X
Check transistor collector currents. as
ALL VOLTAGES ARE POSITIVE
4. Check alignment. WITH RESPECT TO GROUND.
ROCK IN FOR
MAR AT PEAK AT PEAK AT PEAK AT
580 KC 55 KC 55 RC UNLESS OTHERWISE NOTED -
435 NC CAPACITORS MORE TITAN 1MOIF
CAPACITORS LESS THAN ITMF
RESISTORS ARE 1/2 WATT K1000
EP 3 STEP 2 STEP I
1TEp. CIA 32 MF
3.2V
1K
JE_AY
ROCK N FOR
MAN AT
RI
1400 KC C3
NOTE 11
GI
5 NOTE 2) Fe 7 220
390 OA 470 re)
CR H5 5641 on eamc 4 SV
NNE CI088
X
SETS :1 147.1:
OCR
C
Li SEE AWES 188 (SEE NOTE 31
TRI L2 o) TR3 NOTEI31 IS 7020 MA. NO SIGNAL [ugly -NT
e 9T SEE Ion 5) WAX. MEASURE BATTERY
ZNISIA 45- (SEE NOTES 22131
itgijiA VERSES. TR4 TR5 300F
C111 CURRENT BY INSERTING METER
2N166A TR2 2 216123(11 VERSION) 218263 zN LEADS IN SERIES WITH THE
2N
6v
:55mA ,000000000;11111011 ae4 .13-95MA ,T3 4z411a5202A.2 BATTERIES.
CI 0008
C11 BATTER! LFE UNDER
C9 OFF NORMAL. USE 50-120 (IRS
5v
43K
390 390 3MF IK TO 5.6
IN870 6v
.85- E 2.3-54MA I6MA
..9511A 014
CH2L_ Cl2 MS 40V
22V )
R2 388 270 390
666 ON SOME SETS
100 02
AVC
INB TG
OC 5V
N, E 2 055
R12 _c;liI 442
RIO 003
ACIAAT FOR 86 + CIS
IK MAX AT ISO ARK
4
1620 KC C10 36ItF
10K
.6V
CS 05- 3 11Ovv9
_C19
520103
.05 OR 047
Om 2 3/4 SPKR.
6V
iINICASTORTEP
00 PUT TRANSFORMER POWEOS MR OUTwPUT
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
GENERAL ELECTRIC
Models P785A, P786A, P787A
TO REMOVE CHASSIS
1. Remove volume control knob. E
2.
3.
Remove battery compartment cover.
Remove hexhead screw located in battery compart- '
ment.
11--"\AN-41
4. Separate cabinet halves at bottom approximately r--
1/4 inch, raise bottom slightly to release lock-
ing tabs at top of cabinet.
5. Remove 4 screws holding board to plastic cabinet
bosses.
6. Remove 1 nut holding board to mounting lug in
plastic boss. fx
Swing speaker end of board up and toward volume 4
7.
control end.
8. It is not necessary to remove volume control to
repair circuit board.
s'
1;1
a 0,
uo
41 0
ud
e
r pn
tl T
a.
s
i9 EI
2
LL
/
E / geF.4
O
tr
w 1--
2- Ix
Z
5a. 2-
co
57
BOTTOM VIEWS
5
3
121 10-2004
220 SV
-
1
9,2197
ECA 9 4,4.14E
USE 5. 5,elIPS
RIO
`561,
390 444
I OS
I
I5 aD
TR
GE 4.1113.3 ce
TE STL .400 047 9V.
r3 ,T600 2111059.4 (145,,D PL2
411
R2
e
5V
iY, 2
"
5-7 MA
niY 15± @Dat
TI 000 2,110511
6.8E C2D
II II
TIN
4- Rif
US It
T 047 9,1.
4700 or, 4;05 V
2510554 NPN
CM_. GE 4.1E850 PNP
1 1
h 1 470 047 GI 4,0E550A Pt.` '51
1 J
4g4
OH T
- * 4-
4
"FP 952,2, EE:9 IEEVE
seo EL IME9LE
TO SI
T3 T5 Y B+
6 I
4
3 2
TO CIE
CIB CID CIF
3 L4
[0111111? 1111L
CIA CIC CIE
T4 NOTES
I EOR 9.49 NO TRs
CONNECT YELLOW E AD PROM 16 TO
TR7 PONT IC SEE COMPONENT WIRING VAGRAM
CONNECT A JUMPER WIRE BETWEEN POINTS
R30 E ANOV SET COMPONENT WRONG NAGA.
FOR NP TRY AND Tee
CONNECT YELLOW LEAD .11. PROM T TO
NPNic POINT SEE COMPONENT WIRING DIAGRAM
CONNECT 40MPVI WOE BETWEEN POINTS
' AND "C" SEE COMPONEN WIRING MORAN
RED T6GREEN
3 REPLACE WITH TRANSISTOR TYPES S091.11.
Y UNLESS OTNERvosi NOTED
C14
LAALIORS MOM THAN 191411,
R23 P _OE SKR E.40104, LESS THAN I.
BLK RESISTORS ARE ,17 WATT 0.0001
RI5
gi 5 VOLTAGES ARE POSITIVE *am RESPECT
BRN TO CI TO TO GROUND SPIDER NO SIGNAL CONDITIONS
FRAME CIB VOLTCES S ERE 144
COMPONENT WIRING DIAGRAM LI TR7 ENO TRIN NON
CHASSIS REMOVAL TO ANTFNNA
[ADJUSTr. FOR 580 KC
1. Remove both knobs. 4 TR2
2. Remove the 4 batteries. 171671ST TI,T2,T3 FOR 455KC
3. Remove cabinet retainer strap. 4. Unsolder the
TO RE
two leads on the speaker. 5. Unscrew the 5 screws ANTENNA ------ RZ' _A/_ CIO
-NVV- Rjj
holding chassis to cabinet. When replacing the circuit /OM\ AdElls
board slide the antenna edge of the board under Clb Cc
the circuit board holder and replace the screws.
CI
ADJUST ADJUST
FOR FOR.
TI, T2,T3 TRANSISTORS MAX AT MAX AT
ALIGNMENT 1500 KC 1620 KC
SET VOLUME CONTROL AT MAKiMUM, 4-7
CONNECT OUTPUT METER OR SCOPE ACROSS 0 0
VOICE COIL
INDUCTIVELY COUPLE SIGNAL GENERATOR TO ®0 ® 2
RECEIVER
STEP 1,2 & 3. SET SIG GEN AT 455 XC, WITH
RECEIVER TUNING GANG OPEN
STEP 4 - SET SIG GEN AT 1620 KC, WITH IF TRANSFORMER
RECEIVER TUNING GANG OPEN S- COLTTCTOF
STEP 5 - SET SIG. GEN AT 1500 KC, TUNE BASE
RECEIVER TO 1500 KC L2
-)11- EMITTER
STEP 6 - SET SIG GEN AT 580 KC, TUNE
RECEIVER TO SRO KC SNP TRANSISTOR
2
C011 .2C TON
3
50 T TEA
OSC COIL
BOTTOM VIEWS
ADJUST FOR MAX
ADJUST FOR MAX 455 KC
580 KC WHILE RADIATED SIGNAL
ROCKING GANG
TO SPAR.
COMPONENT WIRING DIAGRAM
TEP 6 STEP 3 STEP I
42V 5.20
C16
C4 ,22
101 C12 RIB
100
OS
R5 T3
TR3 -
150 2N293
6.0 58-67NA\
C6 RIG
BZ IN64GDI 10 09
rr NI 4V I
OR RIO BATTERY LIFE UNDER
1
NITTA
lam TR2 SO1 106/ R20
2 /100 MT. NORMAL USE 175-250 HRS.
1 2N135 22
RI 4 _?J
CS
100 7-IMA.
J 4.60
EH MA. 2.5 3 51AA.
IC 5.0V
3 7V 50-60 A.
0.470
R7 C18
4 76 2NI92 TR5
PKR
,----11 26241A 8,7
ADJUST FOR MAX C19
1500 KC WHILE 0033 047=
ROCKING GANG Col 4, 2400
Cl y RIO
R6 01 330 R14
ASK 606
IR8
OK RID
12
TEP 4 I MEASURE COLLECTOR CURRENTS WITH A
UNLESS OTHERWISE NOTED RESISTORS I/2 W CARBON
VOLTAGES ARE POSITIVE WITH MIL LIAMMETER INSERTED IN SERIES WITH
ADJUST FOR MAO
K .1000 TIRE CIRCUITS MARKED AND ALSO
x
MmF
RESPECT TO GROUNO
1620 KC WITH CAPACITORS MORE THAN BATTERY CURRENT AT POINT MARKED 'X'
GANG OPEN CAPACITORS LESS THAN I. MF IN BATTERY CIRCUIT.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
GENERAL ELECTRIC Model P800A
TROUBLESHOOTING
TO REMOVE CIRCUIT BOARD
NO RECEPTION:
1. Remove cabinet back. 1. Check battery voltage and battery contacts.
2. Remove hex -head screws holding chassis board to 2. Check on -off switch.
cabinet front. 3. Check all antenna lead connections.
Caution: Do not remove brass hex -head screws 4. Check coil L2.
holding speaker magnets to speaker. WEAK AUDIO:
1. Check battery voltage for 6 volts.
TO REMOVE TUNING CAPACITOR OR VOLUME CONTROL 2. Check battery current.
3. Check transistor collector currents.
1. Remove knobs. 4. Check alignment.
2. Remove cabinet back. INTERMITTENT:
3. Remove chassis. 1. Check battery contacts for corrosion.
6. Remove flat head screw from cabinet front. 2. Check solder connections on dip -soldered side
a) To replace tuning capacitor, remove phillips of circuit board.
head screws on cabinet front.
b) To replace volume control, remove screw from Intermittent audio, motorboating, and poor re-
bracket near volume control inside cabinet ception is frequently caused by poor battery con-
front. tact or low battery voltage. The terminals on the
batteries should be cleaned to insure positive
electrical contact.
R5
330 CU
FFICCK IN FOR' FROCK IN FOR ADJUST FOR MAX
M40 MAX AT 32 MFD 10V
45510 RADIATED
J p3 1 _580KC SIGNAL BATTERY LIFE
TEP I
1
.T -
STEP 6 330 /STEP 3 \STEP 2 UNDER NORMAL
/STEP 5 821; RIB USE 50-60 HRS
C5 100
Ti F
R4
10K
TI /+ 8MFD RII -C11 Cl2 ( 16V-
jj
_.-. 6V 27K CIO- .05 .75 FD
CA4 CaYT IF TR2 TR3 I2MV
T3 4 SI 8-125 MA
LI
TRI 3 NOTE 2)
(SEE6OR TR4 RI6 Z RI7
GT7 NMI 21 Si
1, *1' T SEE .375M1'+ - 2N4I0 (SEE 27K S 22
NOTE 2) GE 4JXIA8I3
2in 5.6 NOTE 2)
C16
Sr 2N1058 54V 7- +,,
C2 57 75
MA 091
DI
4T, 55V
5QMFD
01 44V L _ _ _1200 41.1 /44 '54 lu V
200 .3V
IV TR5
42V LF_ _1
7V NOTE 21
5.2V .48V 2N24I
2N408
RI
10K 15-22 16-20 MA
C MA
RIO
.01/ 4.7K
woes. :7 MFD
R2 C153
IK RI3 A MFD
R7 100K
STEP'\
1
R15R21
ADJUSTFtR MAX
IC7 Re R9 RI4
15K 390
R20
7047 .047 1.2K
AT 1620 KC WITH 3.3K 470 100
GANG OPEN
IF TRANSFORMER IF TRANSFORMERS OSCILLATOR TRANSISTOR
15T 2ND IF a 3RD IF COIL MOUNTING ALIGNMENT
NOTES.
0
4 5 SET VOLUME CONTROL AT MAXIMUM.
o2 C UNLESS OTHERWISE NOTED -CAPACITORS
0 3' °'0 CONNECT OUTPUT METER OR SCOPE ACROSS VOICE COIL.
1
0 3 2 s,2 Elo 0 C MORE THAN 1= MMF CAPACITORS LESS THAN
I= MF RESISTORS ARE 1/2 WATT K =1000
INDUCTIVELY COUPLE SIGNAL GENERATOR TO RECEIVER.
STEP 1,2,83 -SET SIG GEN AT 455KC, WITH RECEIVER
2 REPLACE WITH TRANSISTOR TYPES TUNING GANG OPEN.
BOTTOM VIEWS
SHOWN. STEP 4 -SET SIG GEN AT I620KC, WITH RECEIVER TUNING
GANG OPEN.
T3 STEP 5 -SET SIG GEN AT 1400KC.
To TR3 C6 - 'FN AT SROKC.
SPKR (--1_
la 5 C16
______11
R2I T R/7
R18
R15 'N'\/Ne- f--iri7-1
`. C8 "1.1 ! C3
JACK - VW
RI6
TO
SI 2
CI
TI
014
,nfWv---
RIA
TO
R12 CE
COMPONENT WIRING DIAGRAM LI
60
BOTTOM VIEWS NOTES 0
tmi ,..,,
1/4 TURN I
DIAL POINTER UNLESS OTHERWISE NOTED CAPACITORS v
A TURN I l OSCILLATOR COIL MORE THAN I. MMF CAPACITORS LESS THAN I "MF r
til
1.---1---,1 RESISTORS ARE 1/2 WATT K.1000
P:I
. _
gib 0, 4, 2 VOLTAGE AND CURRENT READINGS ARE
.2 AVERAGE UNDER NO SIGNAL CONDITIONS VOLTAGES til
I.F TRANSFORMERS r
FINISH s .3 5° ARE POSITIVE WITH RESPECT TO GROUND
0, - til
( ,----- 3 VOLTAGES SHOWN IN I 1 ARE FOR PNP ri
MOUNTING VIEW OF GANG TRANSISTORS IN TR5 AND TR6 ril
,_,. 0
-
3- ' ( .1
../
,.... START 4 REPLACE WITH TRANSISTOR TYPES SHOWN,
o
ry
A 0 OSCILLATOR TRIMMER
5 FOR NPN TR5 AND TR6 1-i r...,
_;< _. 0B 3 GROUND ......
A CONNECT RI7 ("A" SIDE 1 TO POINT "C" C) Cil
o C 3 ANTENNA TRIMMER
B CONNECT YELLOW LEAD FROM T5 TO POINT "B" 1-3
1
C R14 MUST BE 100 ohms 4
3 V4 TU-NS ALIGNMENT D R15 MUST BE 56K 0 0
0..
SET VOLUME CONTROL AT MAXIMUM (T)
6 FOR PNP TR5 AND TR6 H
.......°. CONNECT OUTPUT METER OR SCOPE ACROSS A CONNECT RI7 ("A" SIDE) TO POINT "B" til
I VOICE COIL B CONNECT YELLOW LEAD FROM T5 TO POINT "C" t
' co
C R14 MUST BE 5.6K C..o
1/4 TURN INDUCTIVELY COUPLE SIGNAL GENERATOR
D R15 MUST BE 100 OHMS 0
DIAL STRINGING TO RECEIVER. tii
tri
ADJUST FOR ADJUST FOR PEAK AT 455 KC NPN TRANSISTORS PNP TRANSISTORS ti
MAX AT 1400 KC MAX AT 580 KC ti rxi
WHILE ROCKING GANG _____I COLLECTOR ____J COLLECTOR CO
WHILE ROCKING GANG
c....7
BASE BASE
STEP 5 STEP 6 STEP 3 STEP 2 STEP i
R5 ----1 EMITTER ...I EMITTER r--,
C 15 CO
22011 +
8.4 V 8 5V
r 50MF/12V
0
RI2 BATTERY LIFE
CI I RI6 PO
10K UNDER NORMAL USE
05 - 15011
+ -, SI 50-80 HOURS
R3 R6 RI 1 + - tJ
r4T1 -- 11111111111
_C1 39K R4 -1 33011 +_C5 , 22K T3- 3MF
Z -T-' 8 MF/ I2V 84V ,(2V --- .0V 0
-.ol
4 L
10K
V\A A, 0.5MA
'-`CI 0 MA
RI5
2A A 9 OV
- 2 -2
79 0 MA
IC
C/1
L2 1 - II(SEE
NOTES 56K T R5 1 OV 1 zitt
C I 5 5 5 spDKYRNAM
TR2 5 86) (SAME
2 TRI GT-760R AS TR6) T5
CB, T2 V (SEE RED GREEN
2N1058 I (SEE NOTE _L TR4 T4
'11
I- r (SEE NOT 4) r- -1, 2N406 GRN NOTES ,", 13
n
0-I
1
4) 5 86i, ,,,, YE
2 1
4 (SEE Iv A C
43 s>
4,
I- - - - - -, NOTE 4) 016V
(... 3 I 0.6 1183 DI
YEL RI7 \ 9° 0
V CIO IN64G CI3 18.85V1 27.0,
..,
--,,
030.5V
C3
°I
1,______J
0 I
I
0 02V
.01 IN87A 002.
BLK
,./ 14 02
BLACK
1 BLUE TR6 JACKK ill
i _CC
1 06V
l'---, --.. _ --I 2N1059-I(NPN)
A I
C2
.05
--_,..BLUE
RI
i'
27K
R2
1K
05
MA
B
D
,W'
"L-----______ 1630 KC
STEP 4
ADJUST
FOR
MAX AT
8 2V
R7 R8
1.0K
--1
C7
01
R9
045
MA
4 7K
RIO
R13
180K
RI4
100I2
2N408 (PNP)
(SEE NOTES 4,5,8.6)
2MA
90V
iovi
- 0, .<4J
4
1-3
GANG 150K
jj 47011 (SEE
OPEN NOTES
3
586) Z
VIA
12AX7 72-82 V V2 BLUE GREEN
T
C3
7 LOUD SPEAKER
2-5 104V
(MGM T CHANNEL)
.01Il wry
9-1.1 V
35C5 RED BLACK
lCI
RI DO5
220K 390, 220K RI7A 5.5 V
500K
RIGA GREEN
T
2M RIO O
R5 82,,
39K 1W
LOUD SPEAKER
470K C8C
(LEFT CHANNEL)
30MF -
25Wv
DC BLUE BLACK
C7
.047
UNLESS OTHERWISE NOTED
CERAMIC CAPACITORS MOPE THAN I...IMF
CARTRIDGE ,///// CAPACITORS LESS THAN
METAL RESISTORS - K 1000
CHASSIS RESISTORS M 1,000,000
DC VOLTAGES AT 1205 LINE TO B -
w/20,000n. /50LT METER.
RI60
2M
R6
RII 470K
R2 R4 39K R178
220K 390,, 500K
.9- ki v R8
220K C2
V3
.005
2 C,,4 DI
2-51
.045
72-82V 35w4
VIP
5 35C5
12AX7
R12
SWITCH IN 6 C8Al It,T171F
CHANGER 2W
35C5 %CHANGER 150 WV RI3
105-120 R9
FRAME 1500.,
60 35C5 IW
68K
12AX7
z C861 1;0 MF
ISO WV
TO REMOVE CHASSIS
7. Remove 2 nuts that hold the chassis to the cabi-
1. Remove two screws holding tube access net bottom.
panel;
Remove panel. 8. Slide chassis up and back off the studs, it is
2. Remove interlock panel. not necessary to completely remove the chassis
3. Remove 4 screws holding record changer. Apply from the cabinet for component
replacement.
an outward pressure on the sides of the case to
force the lid guides away from the changer, lift
the right side of the changer out. (Replace in TO REMOVE RECORD CHANGER
the same manner to avoid scratching changer on
lid guides.) 1. Follow steps 1, 2, 3, 4, in Chassis Removal.
4. Set changer upright in the cabinet. 2. Label and unsolder the signal leads from the
5. Remove the knobs by pulling straight off. terminal board to the chassis.
5. Remove 2 nuts that hold the chassis to the cabi- 3. Remove wire nuts and label AC leads to changer.
net front. 4. Remove changer.
VIA V2
12 AX7 BLUE EN
5v
C3
2 LOUDSPEAKER
II
RIGHT CHANNEL
01
RED BLACK
35 CS
CI
9 -II .005 -7-7
390 A 220 K
R3 R7 500K
RISK S
RED GREEN
II5V
220K
RI IW
2M 82 n
R10 LOUDSPEAKER
470K RI4
2M 39K LEFT CHANNEL
R17A R5
§ 17,F -2 25 WV DC
SLUE BLACK
CS
330
047 FOR CORRECT SPEAKER PHASING
C7 PLACE A 1.5 VOLT BATTERY ACROSS
,-RwRimm
THE OUTPUT. WITH THE NEGATIVE
TERMINAL ON THE BLACK LEAD 5 THE
V POSITIVE TERMINAL ON THE GREEN
CERAMIC
LEAD -CONES MUST MOVE OUT.
CARTRIDGE
METAL CHASSIS
- C6 IRI7B
2M
7 330
RI6E1 470
2M R6
220K
R 11
R2
39K
500 K
R IS B
UNLESS OTHERWISE NOTED
CAPACITORS MORE THAN 14 IMF
.18 CAPACITORS LESS THAN I alF
220K C2
V3 RESISTORS - K 1,000
- 005 RESISTORS - M 1,000,000
C4
2-5 DC VOLTAGE AT 120V LINE TO B -
I W/ 20,000 a / VOLT METER
01 4 V4
35 W4 6
35C5
12 AK) 2W _ 100 MF
Ken
SWITCH IN R12 150 WV
R9 CEIA R13
CHANGER 4
35C5 " GEIK ITO()
CHANGER
105-120 V FRAME IW
/35C3
60"A AC EOTOP 50IAF
7124X7
-II
150 WV
C BEI
TO REMOVE RECORD CHANGER
1. Remove 2 screws holding the ventilated inter- TO REMOVE CHASSIS
lock cover. Remove the cover and rest along the
right side of the cabinet. 1. Repeat steps 1, 2 and 3 as described in section
on Removal of Record Changer.
2. Remove 5 screws from the motor board.
2. Remove knobs by pulling straight forward.
3. Remove record changer and motor board by lifting
out of compartment, left side first. Place back 3. Remove 2 5/16 nuts holding chassis to grille.
edge of motor board, down in compartment. chassis to cabinet
4. Remove 2 5/16 nuts holding
4. Disconnect and label wires from twist caps. bottom.
5. Unsolder and label signal leads from terminal
5. Remove chassis by lifting off bolts in cabinet
board on record changer. bottom and slide back off bolts in grille.
6. Remove record changer and motor board from cabi- R20
net. ao..1
6. Repairs can be made to board without removing
R P11306 N
7. When replacing be sure to position power cord from compartment.
in notch in left rear of motor board.
__
am
W.
MK
VIA V2
121187 16A125 3005
c- 817
01 1000
1C8
0022
LOUDSPEAKER
RITA
R7 R9 00K RIGHT CHARNEL
RIG R19
820 220K .1 10K
R1 CI C13 4706
R 3A :084
07
1806 3300 Pn-- C6
5M
R411 01
I
1
PHASING NOTE:
PLACE L5 VOLT BATTERY ACROSS
LOUDSPEAKERS WITH POTENTIAL AS
CERAMIC INDICATED. CONES 10 MOVE OUT MIND
STEREO
CARTRIDGE
R2 C2
ROBI T2
5M
180K 3300 R3 8 C12 R20 Z 623
338 07 180 10K
5 8,T.
RIO R12
-C C LOUDSPEAKE
820 K 18011 220K 70
LEFT CHANNEL
C4 CIO
01 0022
L 3V I V T
R21
CS
4706
R22
Ate`
01
1000
Vle V
MAX7 6 A05
T3 3005
824
1.1Vr
V4 I2K
5Y 3GT
1170 60 7.-1
AC
R25
C30 4 C 38
75MF I 100 MF
TO REMOVE CHASSIS
1. Follow steps 1 and 2 as under "To Remove Record
41J
3 4 5 Changer.
3V3 2
2. Remove Balance, Tone and Volume knobs.
TO REMOVE RECORD CHANGER 6405 6405 121017
3. Remove two (2) 5/16 inch nuts from control
1. Remove 2 screws holding ventilated interlock
panel, remove panel and rest on top of main unit
4. Remove two (2) screws holding interlock.
speaker compartment.
2. Remove 0 scre-s holding motor board, remove motor 5. Remove three (3) 5/16 inch nuts from chassis.
board and changer and rest back edge of the motor 6. Remove screw holding lead dress on signal leads.
board in compartment.
3. 7. Remove screw holding electrolytic.
Remove "twist caps" and label wires.
4. Label and remove signal wires from terminal 8. two (2) nuts holding auxiliary speaker
board. jack.
5. Remove record changer and motor board. 9. Unsolder speaker leads.
EXT. SPEAKER JACK --
TAPE OuTPUT
C19
SMF
R20
100K
100K
VIA VIB 155V
CS 165v C:4
12AX7
01 I2AX 7 1000 rn
LOUDSPEAKERS
1111697 CHANNEL) 74
3 WOOFER TWEETER
5824
8.11
1.6 V 1.4V
422
C4.. 10KIF 1.8K
0-<
II
II R4 5, R23
L811 -EXT. SPEAKER
JACK TAPE
11 WV 1.4v OUTPUT
824
3 18K
211
LL LOUDSPEAKERS
(LEFT CHANNEL,
I V2s
II V2A
65 WOOFER
c3, I2AX7 ICI5
m' I2AX7 log()
145 825
L_ -] 100K 100K
CI5 SUE
A
L
II
JI I
II
I 7 -1 260v
=1
POS S2A AB
PHONO
MONAURAL OFF
R13 STEREO SWITCH TAPE POS S2C S20 S2E SELECTOR SWITCH
A) 1010 1.4
150K 0 ON BAL. CONT. 4 TUNER ON OFF OFF SHOWN IN POSITION 1
OFF OFF OFF 3109
SI ON OFF (PHONO)
RIO C6 2000 OFF
14 OFF ON ON
IPA 5 VAC
RI2 1.7 V5
C21 S29
5000 S2A
RI9 7-4 20000 5v3
I 52C S20 52E 2509
111 50PC! 300 VAC R26 208
1(12 417111
MK 2
1
11 U 93 MA DC R27 5.611
1212000 ts
IB - 100MF
I 300 C 7C 2 c
IC11 10K 4
RIG R31/ VAC
416 12000 4011F1-
C5 500K 3311 40MF:
IM 3.1 VAC 4 9
20000 C2
0I7 I 5000 0 820 (23 v4 V3 v2 PILOT
P9 100K RI) 7189 r 7189 I2Ax7 LIGHT
IM
AC9 2000 _C22 820-C24 5 5
3.1 VAC 445 485
AI a0
820 LEFT
CI, Al F6 0 TAPE
MO 05K A' THESE COMPONENTS ARE CONTAINED IN
RIGHT
-C23 0 RC NETWORK R5 2421
LEFT
1120
[ii] 0 TUNER -F
RIGHT CONNECTED TO TUNER
1
0 STEREO
_J POWER INPUT IN UNLESS OTHERWISE DENOTED
INPUT JACKS ON CARTRIDGE RC 1250/1251
CAPACITORS MORE THAN I = mmK
BACK OF SET
CAPACITORS LESS THAN I = LIF
II RESISTORS - K = 1000
171 II - N = L000,000
1
CONNECTED TO TUNER DC VOLTAGES AT 1179 LINE TO B -
11 117 v AC 60 II
BALANCE TREBLE BASS LOUDNESS OUTPUT IN RC 1250/1251 W/20,000 / VOLT METER
I
-L TO PHASE SPEAKERS
APPLY 1.5 VOLT BATTERY POSITIVE
TERMINAL TO SPEAKER TERMINAL
4. Remove pilot light socket from clamp. MARKED WITH EITHER + OR
TO REMOVE AMPLIFIER
5. Disconnect 4 wire nuts from speaker leads and COLOR DOT. THE SPEAKER CONES
MUST MOVE OUTWARD.
remove lead dress. THIS MUST BE DONE FOR
1. Remove cabinet back. EACH SET OF SPEAKERS.
6. Remove 6 nuts that hold chassis to cabinet
2. Disconnect AC1 to amplifier chassis (polarizing bottom.
mark facing T3.) ALL VOLTAGES MEASURED
7. Remove amplifier chassis. TO CHASSIS.
3. Disconnect control socket Si.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Ltd. model TH-621
Ics44.vja .3o441"..
BROWN (3'.,;s: RLU CONY. 1ST. I.F. 2ND. I.F. DETECTOR A.F. AMP. OUT PUT
DIODE
TR, HJ 23 TR2 HJ 22 TR3 HJ 22 IN 34 A TR, HJ 15 TR5, a HJ 17x2
WHITE
1 1 YELLOW
20
Li
0:4270
FERRITE ANTENNA
ANT. COL --'4W1- C
Clop Cu 514 15114714
C T. -114V Ts -9w 91/ T4 0.13V II [Ts
YELLOW C Ts
81 ICso r 3
0.13V- 40
0.020
ail
EARPHONE SCOW
j,
,7' T" 2 1611TE
R. 56K
-0.76V 1 2,1
130
Cs' raj). 0.13
O 3 MOWN c.
5P
4 BLUE
RI 10K
4--V01414-
RI3 14 SRIf
ORO 15
21 C4
22RTton3 0.0I
3
=;6, RIO
10V
Fa C
C 51 !BATTERY 9V (BLOOM
-4;"" 5-111. II
TRANSISTOR
CONNECTIONS
To check for a circuit defect which would cause
To
The output circuit used in this receiver is of the excessive battery drain, an overall current measurement
" Class B" type. It should be noted that in " Class B" and supplementary voltage measurement should be made.
output the battery current increases greatly with in- Oscillator performance can not be judged by meas-
creased signal input. D.C. voltage developed across a resistor.
With no signal input, the A.G.C. source as meas- Measurement of oscillator signal strength with an A.C.
ured at the top of the volume control, will be 0.75 volts voltmeter at the emitter terminal of TR1 will give an
negative in respect to the ground. Rectified signal voltage indication of oscillator performance.
will make this point less negative in respect to chassis A transistor should always be removed from its
ground.
Don't remove any transistor from its socket (or rein-
socket before using a soldering iron on the socket
terminals.
sert it) when the set is turned on.
ALIGNMENT PROCEDURE
R9
Test oscillator-For all alignment operation, connect
the low side of the test oscillator to the receiver chassis
CII and keep the oscillator output as low as possible to
avoid A.G.C. action.
Output meter alignment-If this method is used, con-
nect the meter across the voice coil of speaker and turn
the receiver volume control to maximum.
Step Connect high S.G. Dial pointer Adjust for
e of S.G. to Output setting max. output
Variable con- I F Ts
denser termi- Quiet point
1
nal of osci-
555 KC I F Ts
near 1600 KC
R4 Ilator I FT.
TR 2
2 Repeat step 1
-T 2
Lowest freq. Dust core of
-C11 3 Short wire 525 KC oscillator
placed near of dial scale coil Ls
- TR 3 antenna for
- Ca radiated sig- Trimmer of
Highest freq. oscillator
-T 3 4 nal 1630 KC
of dial scale variable
-C 19 condenser
5 Repeat 3 and 4
R 15 5 13 T4 R12 TR 4 DI C15 CI 6 650 KC 650 KC Move antennacoil
66
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
LyVitacWgLitct. model TH-666R
ToicA.ya Jo f3Q
DETECTOR A.F. AMP. POWER AMP.
CONY. 1ST. I.F. 2ND. I.F. DIODE
ALIXIUARY TR12N 219 TR2 2N 218 TR3 2N 218 IN 34 A TR, 2N 215 TR5,6 2N 217 WIVE ®
ANTENNA -LACK
YELLOW 0 0
WI A2270
POE
34 OK FROWNLi
MOTE ANTENNA
I YELLOW DV
Ca t/ 0,3x
C 74* T4 0.1
1.1 TI .AV T3
: i6
I .0.32V
Cy
0.11V
-003V
APACHE JACK
CI 10.1 -rfAKr 11
10V 1 aV
/1:6 t WIOTE RA OATV I Cu 0002
1T 0.033 I 330
3 MOWN 001
c, 1/41 117 Cl.
3
9.00
O -21 hz.
3E
0 1r 109 levy, CI.
10K t10
6V
SPEAKEP
2'
1. The first thing to check when the receiver is in- With no signal input, the A.G.C. source as measured
5.
operative, is the battery with the receiver turned on. A at the base of the TR2 will be 0.5 volts negative in re-
new battery should test 9 volts although the receiver can spect to ground. Rectifier signal voltage will make this
be expected to operate with a battery which tests 5 volts point less negative in respect to chassis ground.
or more. 6. Do not remove any transistor from its socket (or
2. To check for a circuit defect which would cause reinsert it) when the set is turned on.
excessive battery drain, an overall current measurement 7. Oscillator performance can not be judged by meas-
and supplementary- voltage measurements should be made. urement of a D.C. voltage developed across a resistor.
3. The output circuit used in this receiver is of the Measurement of oscillator signal strength with an A.C.
"Class B" type. It should be noted that in "Class B" voltmeter at the emitter terminal of TR, will give an
output the Battery Current increases greatly with increas- indication of oscillator performance.
ed signal input. 8. Voltage measurements should be made only with a
4. Extreme care should be used to avoid accidental sensitive voltmeter.
shorting of transistor elements to the circuit ground. 9. Interchanging transistors in the IF stages may
This is especially true of the output transistors ; if the necessitate realignment.
junction of R13 -R14 should be accidentally grounded for a
few seconds, the output transistor would be permanently ALIGNMENT PROCEDURE
damaged. Connect an output meter across the voice coil terminals
LI CI ANT. COIL
of the speaker and turn the receiver volume control to
maximum.
R 1-_. For all alignment operations, connect the low side of the
C 2--
R 3- C 22 test oscillator to the receiver chassis and keep the oscil-
-PVC lator output as low as possible to avoid A.G.C. action.
TR 1 2N 219
R2
T1 Step Connect high S.C. Dial pointer Adjust for
5 C6 side of S.G. to output setting . Max. output
T4
R 13-... ;lb.,
C 16-..,
C4
--R 4
1
Variable tuning
capacitor term:-
nal of oscillator
455 kc QuietIFTs pointti
near 1,600 kc
IFTs
IFT1
T14 B-2 B-
R 14 ..... -rtlIllb
Wale*
MIgliEftl_ ae. ..e. -C 7 Variable tuning
R12 capacitor termi- 0 repeat step 1
C 17- WPM IVA
TR 4 2N 215
-TR 2 2N 218
2
nal of oscillator
EARPHONE lir 40(4.,., Short wire pla- Lowest frequ- Dust core of
\SOCKET
`..... .1,a oi, "tab 5 , ced near antenna 525 kc ency of dial oscillator coil
TR 5 2N -7- C 19
-C9 for radiated sig- scale L2
CN nal
C 21 414I.Irq6: *V
if R 11
C3
R9
C8
115
T2
A
-Short wire pla-
ced near antenna 1,630 kc
for radiated sig-
Highest f re- Trimmer of
quency of dial oscillator vari-
TR 6 2N 217' " R 15 RIO R6 C11 "
nal scale able capacitor
C10
0114141 1 TR 3 2N 218 Short wire pla-
T 5.7
C 20
I
11 C13 -C 18
ced near antenna
for radiated sig-
nal
Repeat 3 and 4
C 12 Short wire pla-
ced near antenna 650 kc 650 kc
Move antenna
-T3 " for radiated sig- I coil
nal I
/15 C 14
/ Short wire pla- Trimmer of
Re R7 GD 7 ced near antenna 1,300 kc 1,300 kc antenna var ia-
for radiated sig- ble capacitor
BATTERY nal
67
VOLUME R-20, MOST-OFTEN-NEEDED 1960 RADIO SERVICING INFORMATION
HINTS
Ltd.. Investigate trouble by the following procedure. When
a faulty item is discovered inspect L, C, R and the transis-
tor of the relative circuit by referring to the circuit dia-
gram, base plate diagram and parts arrangement diagram.
Inspection 1 Check battery voltage
model a . The battery voltage should be 6--/ volts or more
when checked by a tester.
b . Replace with new battery when no tester is avail-
TH-862R able.
Inspection 2 Check for faulty connection
a . Check the continuity of the battery snap lead wires
by means of a tester.
b. Check the continuity of the switch on the volume
control with a tester while turning it on and off.
Inspection 3 Operation test by click noise (poke with
O.? driver tip)
a . Check whether "click" is heard when a driver tip
contacts point (B) of the circuit board diagram.
The audio frequency circuit is okay if a "click" is
heard.
b. Check whether click is heard when a driver tip
contacts point (A) of the circuit board diagram.
The frequency converter circuit and all following
circuits after it are okay if a "click" is heard.
Inspection 4 If a click is heard in (I)) of Inspection 3,
check the antenna and input circuits.
Inspection 5 If a click cannot be heard in (a) of Inspec-
tion 3, detach the circuit board and repeat the test.
a . Check the emitter voltage of TR7. 8. If it is
abnormal, check the resistors, capacitors and coils.
Also, check the voltage of the collector and base.
b . Check the emitter voltage of TR6. If it is abnor-
mal, check the resistors, capacitors and coils.
c . Check the emitter voltage of TR5. If it is abnormal
check the resistors, capacitors and coils.
Nat'
Q
ti
00
-
eO
tt,
vQ
ti
Itt
ry
46i4.4
cS'
"zc 14,
68
SCI SC2 SC3 SC4 SC5 SC6
2N252 2N253 2N254 IN295 2N238 2 N185
CONVERTER I -ST I.F 2 -ND I.F. DIODE DETECTOR AUDIO DRIVER AUDIO OUTPUT
(924005)
872010) ANTENNA (SEE NOTE 9).
COIL 10.02 V
TUNING L1 (768013) (760020) (760020) (760021) (726006) (724016)
OSCILLATOR I.F INPUT I.F INTERSTAGE I.F OUTPUT AUDIO AUDIO
COIL TRANSFORMER TRANSFORMER TRANSFORMER +2.9V DRI R OUTPUT
00v L2 TI +3 8 v T2 +34V T3 TRANSFORMER
CI (800041) C13 TRANSFORMER
3 Ov +- 0,49v +055V (8105m6F0D17) 0.94 V T5
31 VOLUME GREY GREY
Cie 1
.01 3. 1 (742002)
P3 IV ei -1-0.26V 10.31 V R13 C16
350 350 7600 31 Bib- DC DC --OE 715
2 5K .01 525
_T DC
41 6 Cl2 DC.
I. 01
C6 L. LS
-.05 R5 12.
^C9 R10
220 .05 330. (708012)
R6 R16
R2
4.7K 470
I2K *0.02 V
C7 R9 C C15 SC7 _t-11
50 2N185 J
C5 15 5.6K 22 R12
- 50 C8 MFD EARPHONE
R8 3.3K
8560181 JACK
28 IMFD. IK
AUDIO
OUTPUT (934021)
(856018 (SEE NOTES).
R4 R7 R II 8214 R18 R21
RI
27K 5 61( R 17 68
3.3 K 470., 2, 4.7
100 I/2 W.
MA,
02 CI4
I. F. 455 KC. 50
(930304)
SC8 IMFD I MFD A)
(856018) = (856019)
SOLAR BATTERY
DISASSEMBLY INSTRUCTIONS O.F.L..- to
1. Remove the dial indicator wheel by turning the center I
to
chrome nut counter clockwise until it is completely un- ILISOLAR BATTERY
L I--
`11
.J
screwed. K
B* RED *R *
2. Pry out chrome plug located at the center of the Solar B
Symbol below the dial. - -1 13 1
R
1-
3. Lift out the dial calibration plate, exposing two counter- i i
F -.74
..x. 4V0 TS
1 Iii_i lei **-'. D
i
sunk slotted head screws adjacent to the tuning shaft. L ..__i L..IAT-i 7..°11
Remove these two screws, 1). SI 32 - MERCURY
_I
(904004) * TERMINAL CONTACT IDENTIFICATION
ON -OFF BATTERY
4. Remove the case back cover by removing the 4 corner SWITCH
ON PRINTED CIRCUIT BOARD (563005)
POWER ** TERMINAL CONTACT IDENTIFICATION
screws. Remove the Mercury Battery. ON 813 (930003) ON MERCURY BATTERY(930003)
5. Slide out the Solar Pack, unclipping its black and red RED DOT RED DOT RED DOT
leads after the Pack is out. 6 I In
6
6. Remove the slotted head screw in the Mercury Battery 5 CD
4 4 3 0 3
The entire chassis may now 3 4 II
compartment,
be lifted from the case. L2 TI , T2 T3 CD
7. Remove speaker from chassis by unscrewing two slotted to
OSCILLATOR COIL t_ I,F.
head screws in back of the speaker magnet.(See Fig. 1). TRANSFORMER BASE CONNECTIONS
This eliminates the speaker ground, so a clip lead NOTES
I
should be connected from speaker frame to the metal ALL CAPACITIES SHOWN AS DECIMAL FRACTIONS ARE MICROFARADS AND SHOWN AS O
WHOLE NUMBERS AREMICROMICROFARADS. UNLESS OTHERWISE NOTED - Cr)
battery compartment. 2. ALL RESISTANCES ARE GIVEN IN OHMS K.1,000 , M.1,000000
haffman
3. VOLTAGES MEASURED WITH A saw -RADIO TUNED OFF STATION - VOLUME FULL ON.
4. ARROWS ON POTENTIOMETERS INDICATE CLOCKWISE ROTATION
CAUTION DO NOT ATTEMPT TO PRY OFF THE TRIM- 5 " SC" NOTATION IDENTIFIES A " SEMICONDUCTOR" DEVICE
MER COVER PLATE. THIS PLATE RO- 6. ALL VOLTAGE ,MEASuREMENTS TO GROUND WITH NEW BATTERY -4.2V UNDER LOAD.
TATES TO EXPOSE TWO ACCESS HOLES IN THE END OF 7. INDICATES ASSEMBLY.
CHASSIS 1123
INDICATES SHIELD
THE CASE. FRONT HOLE TO OSCILLATOR TRIMMER INDICATES GANGED SECTIONS. MODELS SERIES P706
C2A, REAR HOLE TO RF TRIMMER C1A. &NUMERALS SHOWN IN PARENTHESIS (XXXXXX) INDICATE HOFFMAN PART NUMBER
9 AUDIO OUTPUT TRANSISTORS SC6 AND SC7 ARE ELECTRICALLY MATCHED
-
I
6U8 6AL5
FM MIXER I
T102 6BA6 6BA6 RATIO DET . ..._
. co
011024 . I F AMP
r- ---i DRIVER V203 0
V20 V202 1103 10
I 1
115 1.11 Arf S I' k1 VOLTAGE S: 551 30 6200.
1
.-- .. I w01.12033 ANF uswasia 0 20
r
6C Y 5 I 26
1 0501CATES VOLTAGE IP
FM R -F AMP i22 o I
NeAsuNED woTs 21,46
V 101
REM,. IN 2.01105 VOTIP 330 62001 24CXF.
, c 105 '.1 ,... ---,c, 22067 L_ .1
1
...i, , 4
j .:. ,z,v 21-
e, . .
2120V % 170
/
VON 9 P102 ' 1500 tli
'...' el°, 0 k
21 .1- ,, PC201
Lo, -T-Ce36 Pa: , .-N --,
UP
C1015
. .0
%869
L103
1
92.5V
,
-- , - P1209
100P n '
- ,
:/
,
ill__ Tit.. T 030
, .... fie .,
00.1 c o
.0. a _ L'" -,
.I N
611A6
FM OSC IN NU 1 2i / 3201
c ,,,-.., do
VI028 -i-A- i - A( LL
11 i
t 1? T° 6626
_ 52021 ... -- -- 72. Z 4
68Z6 68E6 ,,- , -I
AM R -F AMP AM CONVERTER I
II.
425 1' C/)
V 103 704 3 V104 1106 2 K ag
I 1307 4r
735 -t--1 H
' I
620
I 10121
Roos C,, I 1
2700 a . :14 ems 1
47 itd-4
0
ea `44 v
v .. .00 i
X 0
1
N ... .,. o
Ei
I_ - __-/ P2 , P3 4
2 .____. Pli
30',5C10115 9i, 2 NFG
,"V. - - - -
PCi
Va .,..°° C302 P H
0119
5--I '11325
0 12. 5505
-2-.tr 13445 Om
000 o11 .900
gA20T1,0g i ..c.,,3 I, t1102
10.2.
Paof : 4 1
rhilli
".-c3ox ...
INN
6303
: RIR 10
530
:0
1
- ... a: cup; FRoNT FRONT
on 2205 (--) z
i Co 5 I 0125 _rVVI Z til
" 51>
6Cv 3 iNPNIT tli
/I ,A.,,.....2 ._T 2 6A05 C/1
vet '241303,46226
v103 vial , 466
06 43101 OUTPUT Ci) U
A 9 '--06 V302 I-,
I SHIELD
. 530 6U8 til
PRONT .......2 0 CI)
9
A -F AMP
n°9 =C.. 1:::i
V301
5Y3 - fAt caf cli
RECT REAR ,
. 20 CJ1
1--
SELECTOR KNOB POSITIONS 11306 P309 II,. .,2
V304 ,50 750 1000
kW ., ' 1
CD
115
C306 $23
FM PO 0011 o FL
PH AM
-d7 C) Cr)
.. ,..... C4016 . 0, 1.7
55-01Bi STER TAPE '.. -x4 F IOW v, -R,rC''' 1.--, C)
1 F,50 ,0 .
; .23 r-- 600
ton To 5504 0t+KIT ''3332°
I TO 4504 J12RAI 17 .':' 7302 ...... Pj
TO 4303 0 -
TO C3010
To C3011
,I 25.0 n IY
,tor.. .34 . C389 JIk 0
4.211,..22.7 . T....,,.e ..L.:11., .1(5'4 la iga t:i
TO C126 +-. N. o.. 0 Hy
6303 ON0R303 ON 11,
TO Coi
R342
"o -M1
FRONT
TO C309
To 63023
TO ,101 I
01101-
C30371-+ 4,0,2
°I2. '
i
11031.
mOroa ,
FL 131F-Milii7
Im OUT ET
, t"4
il
V10'2
;10'1
\11.
03.66
-63'.
33002f
44or,-24p,
c4c J.
c3.6
'TM'
7_,
C
..7.
'
'
II 350
MP
C320
ca:
.
e,
1-1
1--ITO
CD
0
Ci)
tli
10326-2,,,, s, C03
TOM 1402`tI S303
REAR 16
4700 :Ns lia Pi
To 55411 CRAMS C206 Rt011 R365 C207 R311 C3152 C31511 C3$10 co v
55 GI- P 330 1005 3900 1200 2 OW 20 ,i,. an C313
-11
0
- - 11301111 ,00 C3. \.
55-01-9A - - 275 5000 $000 2557 2510 - .01 71/:41L.".
...._.; (....)
grznatencma.ars 2g1410 5176.00(6 - 00230 INVERTER 1:1
01303v
J.01 cm
1
(MI
CD
--.1
1--,
........
0
1-,
'11
SCHEMATIC DIAGRAM 0
P:1
(5 5 - 0 1 - 0 0 & 1 0 )
4
H
0
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MAGNAVOX RADIO Chassis 55-01, Continued from page 70
PRINTED WIRING CIRCUIT
V203 T203
PC202
coq
C204
P-13 tA)C
DIAL STRINGING INSTRUCTIONS
DIAL CORD PLACEMENT
Select a 46 -inch length of dial cord and tie a small loop
at each end. Turn the tuning gang fully out of mesh and
hook one end of the cord over the metal hook on the con-
denser pulley nearest the front of the chassis and pro-
ceed with the stringing as shown in the drawing below.
DIAL POINTER PLACEMENT
Place the dial pointer onto the pointer slide and turn the
tuning gang completely in mesh. Lace the dial cord
around the three hooks on the front of the pointer and
with the tuning condenser still fully in mesh, slide the
pointer over until it lines up with the last dial cali-
TO POINTER
bration mark at the lowf requency end of the broadcast
band. This completes the assembly.
10KC 5 GT
Filter V304
Transformer
6 CY 5 C 109
6U8
L104
10.7 MC
90 MC
0 V102
G T 102
40 <4
v-4 v-4
o o
v-4
C.) (-)
6U8
T 106
6AQ5
V 103 V 303
Tt4 T 105
6BZ 6 600 KC 600 KC CHASSIS LAYOUT
71
CON V. S 1st IF ® 2nd IF ®2nd DET. & AGC AF OUTPUT
0C44 0C45 0 C 45 0A70 0071 °C16 x2
50012
E4551(C 455KC
(1)-40mA
(24 ma DS A 1,
AT 1500KC,
0 Cm CONTa
CT qr,V1 T
52" B
0-
600KC 0.5mA ir
® E
15-40mA
TUNING
I -9V
O
0 O
BATT.
ON Off & VOLUME
A
MD 1,
3112(A)
mr
'17-0"4 ® AOC
AGC 0A70 0.0 'MID
n MA23B
IC
(Dost. COIL GERMANIUM DIODES JUNCTION DIODE
CID 10) TRANSISTORS INPUT TRANSFORMER
03 CON ECTIMI
Cs --. C) (D& C)
1500KC 8-6 b R, I 2 0
3®4 3(94
CV2 COLOR DOT COLOR DOT
5 6 O 5 6
COLLECTOR
too '1\
GROUND LUG GROUND LUG
i- EMITTER CD ®
(BOTTOM TIEN) MIMI VIEW)
(Tr V Ell)
1pept M AJ ESTIC
MODEL 900
07 1500KC to Rio( ) ,..\__
to CV EARTH LUG COOLING
to R19(2) to ON -OFF SWITCH
to R10 3) METAL
to CV1 TERMINAL to BATT.CORD) +)
(13
to L1 (4)
to L1 (2) T115
Rio
to L, (3)
to CW2
TERMINAL
TR1
0
L2
14 600KC
12 T3
A TR4
455KC TR2 455KC TR3
455KC
1
C10 C4
CHASSIS BOTTOM VIEW SCREW M3.8
PRI. START
f - - - - --1 - - - -. 1
SEC FINISH ,
V2
BARE I
WHITE 128A6 A3 A4,
5 'Ale A21 V4
,Iiij ir V3
1
i 5005
Pk FINISH
12 AV6
AP 5 I TI I GREEN T2 I GREEN BLUE
4 2 BLACK 31
I 001 ,
117 V
BARE 94V 1 VI 00194
3 ,,,), I .. I.'
SEC. START VI I
.01- CB
OSCILLATOR COIL GREEN SI)}pO -r PC,
I2BE6 T3
: 5 1
1 T.7 -k.+J
1-
4 i 5
L-- - t
-- - 6 6 225 a/ SPA
1
-f0'-- 6
LI 941/ -
- 2
7 I 5.9V
16V 2
1
RED
I C3 0
RI
31
I
22K _ _J 220MMF
L2 2 C4
A R6
21
___
H
_ 002 6 131AEG
I .5D, Al -COUPI5TE 1.5 K
1W
2
6 AVVVV
R9
R4 V5 I' I
WNW 35 W4 C109 11, CIOA
33 MEG. 30MFD 110MFD
Cr -
117 V 150 V. 150 V.
60 CY C12 125V
AC ONLY
1.047 1,- 7
SWITCH ON 047
CH .047 c., CLOCK -= 5005 1213E6 12E1A6 12AV6
a MECHANISM ct.
CLOCK
MOTOR
....
a
II.. APPLIANCE
OUTLET 4 3 3 4 3 4 4 3
/kCHASSIS
COUPLATE- PC -I50 I T
ISSUES 470K
NOTE
.002 220 220 005 I I
MEASURE WITH VTVM
Mr Miff WW 470K
2 ALL VOLTAGES ARE TAKEN VOLUME
H -1H --1H-11 FROM SOCKET PINS TO El-
2201.11.1F CON4
3 ALL RESISTORS ARE )4 WT. ± 20%
AND ALL CAPACITORS ARE IN
5 6 MFD. AND RATED AT 400 VOLTS
UNLESS OTHERWISE NOTED. L.
ALIGNMENT INSTRUCTIONS
SIGNAL SIGNAL RADIO TUNING
DUMMY DIAL OUTPUT LCLOCK__
GENERATOR GENERATOR METER ADJUST
ANTENNA COUPLING SETTING
IIIIIIIIIIIIIIIIII L2
FREQUENCY
L;11
.
.05121FD High side to 455 IC Toning ping Across voice A2,A4 (Bottom) A8
antenna stator (4001,mod.) fully open. coil. Al, A3 (Top) [ f0
lag on taming T2
of I. F. 111111111111111116111
A5 TI
gani. Low side 12BE6 12BAC I2AV6 5005
to B. 35W4
LJ
Loop 16401C A6
A5
APPLIANCE TIME SET
14001C Tune to 1400
OUTLET '==' CONTROL
IC signal
ALIGNMENT POINTS LOCATION DETAIL
RF CORE OSC CORE ANT CORE
1020 KC 0 1020 KC 1020 KC
POWER TRANSISTOR CURRENT ADJUSTMENT - After
0 replacinga power transistor, measure the collector current
of BOTH power transistors and adjust for proper operation.
11111.11r1111111111.1.111.m.di
.111M1WOMMI a. Allow radio to warm up for 15 minutes.
rr
b. Connect a 0-1 amp DC AMMETER, whose internal
resistance is .05 ohms or less in series with the center
tap of a dummy load (see illustration). Connect positive
side of meter to dummy load center tap; connect negative
side of meter to radio chassis (ground).
c. Adjust R- 19 for a reading of 140 ma with 12.6 volts 0
input to radio "A" lead.
10 11
BLU
BLK 10 W DUMMY
RADIOI HT LOAD
1011
iO [L ANT TRIM 10 VI
INSERT AMMETER HERE
1610 KC
2NI76
ADJUSTING TRANSISTOR CURRENT OR PWR AMP rft
TOP 2ND IF 0 TOP 1ST IF 0 OSC TRIM OPERATING SET WITHOUT SPEAKER
BOT 262.5 KC
0 RF TRIM 3.7
0 BOT 262.5 KC 1610 KC 1610 KC
ANT 12BL6 I2AD6
of 12BL6 I2AE6A
RECEPT RF AMP 0o CONY IF AMP
12.83
Z DET-AVC-AF AMP 2N573 0
12 8v 28
5 5 5 T2 R2I 4.5 175
2 a _1_0 5 DRIVER
L3 XU
u 6 12.80 2 41
6
I C4B6400 6 II 40
I
7 1-r 1
a. 02
In cc
cc E2
R22 4.5
20.(1.2
4 4 7
2 CO 0
I I 2
I I RI9 200
C4 CONNECTIONSOLr- 6 I I 5
- O
R3 22M 1
(SEEIERNV
NOTES
4 5 I 3
(LUG VIEW) 4 I I 3
eiv. NV* C4D 300 FOR 2NI76
NOM 'Mn
Vti PWR AMP
21_ TI CONN T2 CONN, X4
_c_22L
(LUG VIEW) LUG VIEW TAP IVOL
L6
50" RIP 100 E3
1 3 2
3-CrT 5 C8 .003'n 000 ,_cs,o___cs" VLEAD
+ -20 ON -OFF 5 AMP
L5 cc
NOTES: -.75V SWITCH Ct6 PARK PLATE
Capacitors -Decimal values in MF. All others C9.002
:11-220C121("
C151500MF CI5EltOMF ON RI
in MMF unless otherwise specified
Voltages -Measured from point indicated rr .833 co
to chassis with a VTVM. NO signal input. 2
Tolerance ± 10 06.01 TONE
Input Voltage -14V DC
Tuning Range -540 to 1610KC
IF- 262.5 KC. "A" LEAD MUST BE CONNECTED TO POSITIVE In SIDE OF
2NI76 POWER SUPPLY. RADIO WILL NOT OPERATE AND DAMAGE
L3 L5,7 LI 7 PLATED PANEL WIRING LEGEND 2N573
/ TOP TOP / TO TO COMPONENTS WILL RESULT IF CONNECTED OTHERWISE
TOP / BASE EMITTER COLLECTOR
. B+ ak. FILAMENT COLLECTOR' 0 0
REAR
EMITTER
r.RF. AVC r r .1F. CONY AVC SPKR
BASE
( 20 11
TRANSISTOR CONNECTIONS
(LUG VIEW) FRONT
MOTOROLA 04MA SPKR
51:. 61 L. r4 LJ 20 II CT
LI,L3BL5 CONNECTION DETAIL AMERICAN MOTORS 8990706 AK -330
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA Model 03AR, American Motors # 8990811, for use in 1960 Rambler
ANT RECEPT 12AD6 12816 12416A 21673. 2N176
CONY IF AMP DET-AVC-AF AMP DRIVER PWR AMP
11.7V u..7v to ev
iT4
4V
R14 4.7
R15 10
R9B
fti
TONG
S 4M
3V
II.7V R13 470
AV/
+A +0
PLUG TO FIT RECEIVER
CI1A -r TiC,101F
ANTENNA RECEPTACLE 3 I I 4
4..._6.,E1
ICC MU_
LA
-
TO SIGNAL
r3OMMF TO RECEIVER
-.ANTENNA
2 I I
"A" LEAD
14VDC
5 NAP
- (.°Nv°17."'"
SW )
0 W
GENERATOR -- - 3 MMF I
RECEPTACLE TI CORN
-4
C12 On
METAL SHIELD CAN I "m4A." ...
L_ MUST BE ATTACHED
TO PLUG 3 I I 4
5 6 BASE COLLECTOR
DUMMY ANTENNA 2
I
I
I
I 1
EMITTER
EMITTER C)I COLLECTOR
T2 CONN
BASE
TRANSISTOR CONN
0
RF CORE
0
OSC CORE
0
ANT CORE
CAUTION
"A" LEAD MUST BE COMMIE) TO POSITIVE
POWER SUPPLY. RADIO WILL NOT OPERATE AND DAMAGE
SIDE Cf
TO COMPONENTS WILL RESULT IF CONPECTED OTHERWISE.
1020 KC 1020 KC 1020 KC
NOTES:
CAPACITORS - Decimal values in MF. All others in AWE
10, unless otherwise specified.
VOLTAGES - Measured from point indicated to chassis.
U + 10%. lb signal input.
INPUT VOLTAGE - 140 DC
TUNING RANGE - 540 KC to 1610 KC
IF - 262.5 KC
riEjLICI OLk 1.1]
OSC TRIM
1610 KC
1ST IF
2ND IF
TOP o TOP o RF TRIM
262.5 KC 262.5 KC
1610 KC
FRONT VIEW (WITH DIAL SCALE AND BACKGROUND REMOVED)
000 000 000
(
000 LI,L2 AO CONNECTION DETAIL
ANT RECEPT D -;0 00 0
ANT TRIM
0
1200 KC
1ST IF 2ND IF
3OT 4 BOT
MOTOROLA
2
U -I
262.5 KC 262.5 KC
Model 03AR
BACK VIEW
American Motors
#8990811
ALIGNMENT POINTS LOCATION DETAIL
75
ANT
G VC
4.5X I2X 75X 42X .085V @ 400.1' AT GRID OF 12AE6A
1000 KC 1000 KC 1003 KC TO 262.5 KC 262.5 KC TO 400 LP
I FOR 1 WATT OUTPUT
ANT 12BL6 I2AD6 12BL6 I2AE6A 2N573 2N176
RE CE PT RF AMP CONY
11 2V IF AMP DET-AVC-AF AMP DRIVER PWR AMP
11.2V 11 2V
T2
6 T1 5 IfT -BLK 13 T4
,5
L3 4 }4.8V .9V
1-7,5MMF11 2
6 11,20 4r f LU
C2
-IIo
O
1-.11 I o E2
G EN
.717 I
I _L I I
I
- -I- 0.20 CW EDT
LI I 3L_ 13.9V
Ct CY I
'7 tr,
a Bn
X
L3 2 R16 6.8
R4 8.2M
12
PLR
c
0 7 R17 6.8 SRL
I
11-0AN-41
I I 2 1 2
C4 CONNECTIONS R2 39M C4D 175 6 I I 5
rcs
(Luc VIES) NOM 4 I 1 3 YE
MA! 4 I I 3
3 C9 68
TI CONN 2 CONN
al (LUG VIEW) (LUG VIEW) TAP ,e VOL
5 L6
225K
2 1L5 121.5 470
L
I; 0 o.21(2;_a_. ..1 -= "A" LEAD
J o C! 14.4 VDC
NOTES: R6 1,5M Al- ON -OFF SW
01--0--raisr-i--.-+ pPLAART EK
I (ON VOL CONT)
Capacitors - Decimal values in MF. All others in C10 L0033 ,: CI411400 MF
C14/1200MF 1
@IMF unless otherwise specified. ,.., -- - IS
4 1/4
cc ,..0
Voltages - Measured from point indicated to rrr + DIAL LIGHT
SPARK
chassis with a VTVM +10%. No signal input. C16 LEAD
PLATE
Input Voltage - 14.4V DC. 14.4 VDC
Tuning Range - 540 to 1610 KC. IDE1
IF - 262.5 KC.
I
ANT CORE POINTER OSC CORE RF CORE CAUTION
1020 KC ADJ CAM 0 1020 KC 0 1020 KC
"A" LEAD MUST BE CONNECTED TO POSITIVE WI SIDE
OF POWER SUPPLY. RADIO WILL NOT OPERATE AND DAMAGE
TO COMPONENTS WILL RESULT IF CONNECTED OTHERWISE.
TUNER CORE PLATED PANEL WIRING LEGEND
ADJ SHOWN B4- 000
as = FILAMENT 431. .121.
0
FROM TUNER
ANT TRIM CORE SIDE
1610 KC
r. RF AVC rr. AVC INPUT rrr. IF,CONV AVC
L _J
COIL
TUNING 000
CONE
vaa
-11 -T1 -11
I 1
-11
00 00 00
- 0
IF'S a TRIMMERS 00 CO 00
SHOWN FROM CM CM CD
vi k..n
TUBE SIDE I
I I
I CORE ALIGNMENT TOOL DETAIL
cp
PLUG TO FIT RECEIVER
ANTENNA RECEPTACLE
13(I MAI 2N176
_ TO RECEIVER 2N573
-.ANTENNA EMITTER
GE) N SE VTAOLR RECEPTACLE COLLECTOR BASE
r-- --I ur
2nd IF BOT OF COIL 1st IF BOT OF COIL 1610 KC 1610 KC C2 TAL SHIELD CAN
262.5 KC TOP OF COIL 262.5 KC TOP OF COIL OSC TRIM RF TRIM MUST BE ATTACHED BASE EMITTER COLLECTOR
TO PLUG
TRANSISTOR CONNECTIONS
ALIGNMENT POINTS LOCATION DETAIL DUMMY ANTENNA DETAIL (LUG VIEW)
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA
KNOT
POINTER SLIDE
4 TURNS
4 TURNS
MODEL
10M X REAR VIEW
TUNING SHAFT
L Thread a sufficient length of dial cord through two holes in shaft,
2. Wind 4 turns from each hole toward center of shaft as shown in detail.
3. Thread over guides and tie knot as shown.
Ce
0 Ct
ant/IL,
zLch VSj
ce
<0
ce
CO CC
CC
ON
ON
O
&3,
1.
C.)
LL Ne
C-) C.)
)e U. YL.
.Z .-. UN In
CV CV
I- i ,--
UlNO vD U/ NO
..0
.--4 CV ^-. M.,
ce
LY
CC
Cc
NU
1.1a
CC
0 C.3
C.3
0-
00
MN -53 OR 2N052 2N176
12816 17F
12111.6 12AD6
DIT-AVC-Ai AMP DRIVER PWR AMP
RE AMP CONY If AMP
J CI WS
12 CONN RI7 10A
TI
.
6"-a
C 404-,-
IGOVE
A 01
RI9
/10
128
ID
AD 205 'F OR'440 MA
8 I,/
E;
ON -C SW
vo, tn, 1.4
en 310 +.V 1E60
140 DC
'I
MOWS:
BASE EMI R COO C
CAPACITORS Decimal values In ME. all Ohm Tri MOM CAUTION CI4B}lam CPC}DR
unkss olnemse spevNed. IVE 41 SIDE OF EMITTER COLLECTOR rtIAT I
"A" LEAD MUST Of CONNECTED TO PO I
VOLTAGES Menu. from point Indicated 10 CIES'S OAT
POWER SUPPLY. RADIOW ILL NOT OPERATE AND DAMAGE
a VTVM. No sgnat uspul. Tolerance 1IDA. TO [GAWP/NTS WILL RI SUET IF CONTACTED OTHERWISE TRANS I STOR,.CONN BASF
INPUT VOL TAG( 140 DC.
77
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ANT
68E6
MOTOROLA 6BA6
Auto Radio Model 10M
ACRE WM OR 2/1126
CONY If AMP RI-AvC-N AMP DRIVER PWR AMP
R12 1M
T1
E2
CS
a R14 10
Ri#5.5e6
.01T
BIAS
CIO MOROI 0,11.1VMOVVIBT
rCONTROL
.002
R5B RD
430
125
RADIO WIRING FOR CMS WITH POS ITI1E
GROUND ELECTRICAL SYSTEM.
5? 5?
o 0 0 ol
1
TERMINAL STRIP
ON -Cif SW
au oil VOL COOT,
KNOT
1.5 IV DC
POINTER SLIDE
Or.
MNT3 OR 251/6 "AM
PWR OSC " Cl/
CIE -
B-
"'""41
RADIO WIRING FOR CAR WITH NEGATIVE
GROIN ELECTRICAL SYSTEM.
ON -OFF N
55 VOL COOT/
LEN
rvoc
r
REAR VIEW
TUNING SHAFT "--14 Up,
L Thread a sufficient length of dial cord through two holes in shaft, 2." X
2. Wind 4 turns from each hole toward center of shaft as shown in detail.
CAUTION
3. Thread over guides and tie knot as shown,
OBSERVE CORRECT TERMINAL STRIP WIRING FOR PROPER
2
2
'A. LEAD POLARITY BEFORE CONTACTING RECEIVER TO
SUPPLY SOURCE. RADIO WILL NOT OPERATE AND DAMAGE
TI CONN
POINTER REPLACEMENT TT CONN
(OM' v11[1,
TO COMPOMM1S WILL RESULT II CONTACTED OTIHRWISE.
AND CALIBRATION NOTES:
CAPACITORS - Decimal voices in W. Al others In MALE
Set tuner to high end stop. Place pointer unless ollwereSe specified.
on pointer slide and set to coincide with cal- VOLTAGES Measured from point inekeled to chassis
with a VIVA No alone! Input Tolerance ±101.
ibrationdotfurthest right. Crimp and cement INPUT VOLTAGE - TV DC.
BASE
pointer in place. TUNING RANGE - SAO KC to 1610 KC.
IF FREQUENCY - 262.5 KC.
TRANSISTOR CONK
COOT .1.1
- IreNceles clactsise rolaten al control.
U K CC C.) CC
-
co, 53 .45
co o.
N0
CC 7, C.)
O -ViVI0
LLu Z CC
u1 1- ID -
Cj
Oj C.
-N ts.1 q,
VI VD .No
CC
0
VI
E
;I-
CC
E 0
c..) et ,..) C.) rr, `0
-CChi .-- NC NC
I- 0 0 0 i- 0
C
0 Cc
E.
CC
0
le10
t_l Cc
78
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
TRANSISTOR R7 R19 R8 C13
tionerLimma,
DRIVER
2N176
MOTOROLA
TRANSISTOR
PWR AMP MODEL
C14
CTA6OX
C12
R12
R10
RU
1 56 7 II
LI. 126 U CONKCItON DETAIL
EMITTER I CTOR
BASE
EMITTER COLLECTOR
BA
TRANSISTOR CONN
immorpot
1 4
TI CONS
IMOT t vim,
ear12 CONN
12 L6 12AD6 12BL6
C R2 RF AMP R3 R5 C9 C6 CONV R4 T1 R20 R6 IF AMP R21 R22 T2 C11 R16
MN -ST OR 2N652
25176
PWR AMP
12816 11AD6 12816 1268 DRIVER
NT
Of MAP
2
CONY
.. IF AMP DET-AVC-AF AMP ATM
RIB 101(
T1 12 IC
LI II L2 4 47
C6
I 1- 1 P 4- 1
21
1-r6
2
CI
4L X
pl
105
RICA
CI3 .01
11 CH
R138 2.2
/-
TONE
5000
SY PLAITS
ADJUST FOR 440 MA
VoV
R8 5.6M n1ZW17,5110-nr""
023 470
NOTTS. 149 DC
CAPACITORS - Decimal value, in MF. all othe. ,m AWE CAUTION
cots -L.° clsc + 0 C19
unless Otherwise specified.
VOLTAGES - Measured from Point inOicaled IA chassis with
A LEAD MUST BE CONNECTED TO POS 171 VE 1+1 SIDE OF 500MF I 'DOME T
POLAR SUPPLY. RADIO W LL NOT OPERATE AND DAMAGE
a VTWA. Ns signal input. Tolerance -110W.
10 COMPOMNTS WILL RES LT IF CONNECTED OTHERWISE.
INPUT VOLTAGE - I4V DC.
TUNING RANGE - 510 KC IA 1610 KC.
If FRLO. - 762.5 KC. 1ST IF 262.5 KC 2ND IF 262.5 KC
ANT TRIM
1610 KC
TOP (TUBE SIDE)
BOT (WIRING SIDEI
TOP (TUBE SIDE)
BOO (WIRING SIDE
1°
O O
0 -r __.
0
RF TRIM ANT CORE OSC CORE RF CORE
1610 KC 1200 KC 1200 KC 1200 KC
PLUG TO FIT RECEIVER
ANTENNA RECEPTACLE
OSC TRIM 50 MMF I
TO RECEIVER
1610 KC TO SIGNAL .,,____ _..1
-.ANTENNA
GENERATOR RECEPTACLE
ALIGNMENT LOCATION DETAIL 41-T 30 MMF
I METAL SHIELD CAN
L_ T j MUST BE ATTACHED
TO PLUG
79
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA Model CTM6OX (used in 1960 Chevrolet cars)
12BL6 12606 3 4 12810 4 12E8 MN -53 OR 221652
ANT 2N176
RE AMP CONV 0 AMP DET-AVC-Af AMP DRIVER PWR AMP
2 fl
12 CONN C15
1071.
025
i
12
I 11 L2 CA MI5
812A
VOL CI
17
AAAAA
It; -
A ON OFF SP
ov os roe, LA
14v
1ST IF 262.5 KC 2ND IF 262.5 KC CI48 + CPIC a
ANT TRIM TOP ITUBF SIDE)
1610 KC
TOP (TUBE SIDE) 5°W I 5aWf I ?'"T -Er -
BOT (WIRING SIDE) BOT (WIRING SIDE)
CAVE ON
'A- LEAP MUST BF CONNECTED TO POSITIVE Hi SIDE
POWER SUPPLY. RADIO Witt NOT OPERATE AND DA/MG(
TO COMPONENTS WILL RESULT IF CONNECTED MERV/ ISE.
NOITS.
CAPACITORS - Decimal values trl MT. all 011w, to MAR
WYSS otherwise SWAIN..
VOLTAGES - MeaSurod from point intlaceletl to chassis wee
a VTVAt No signal input Tolerance +IA.
INPUT VOLTAGE - 14V DC.
TUNING RANGE 540 KC N 1610 KC
RF TRIM 11 1AEU. 262.5 KC.
1610 KC
ALIGNMENT LOCATION DETAIL RASE
EMITTER COLLECTOR
OSC TRIM (WIPER COLLECTOR
1610 KC
RASE
0 OSC CORE TRANSISTOR CONN
1200 KC
C) RF CORE
1200 KC
ANT CORE 2N176
TRANSISTOR
1700 KC
PWR AMP
MN53 OR 2N652
TRANS ISTOR
DRIVER
1R12
,C13
R17
C12
R14
-R13
R10
R8
R9
12 F8
RI CI R2 128L6 C6 R5 12AD6 R4 1.1 R6 12131.6 R20 T2 C10 R15 DET- AVC
CORE ALIGNMENT TOOL DETAIL C2 C5 C4 C8 RF AMP R7 R3 CONV C9 R19 IF AMP R21 R22 R18 C14 R16 -AF AMP
80
I2K5 2N176
12AD6 128L6 IFS
AFT AVC AF AMP DRIVER PWR AMP
CONY IF AMP
0
T1
4 4
v C16 01
12.54 il
3.5 f1
6 12.54. C
GOV
4
3 0
f220 4.5
oo .
e O (
ce
-÷- R21 Ill C20
Li 4,01 SPARK
R6 5.6M PLATE
5
7, 4SW
C8 -a
70 0 I
NOM O
RAP. 2
VOL
CM 4 I I 3
T1 CONN ADJUST FOR
R7 9IM R19
ce 440MA
NVV NW 175
RI 22M
W
13.59
2 0
6 I I 5
4 I I 3 C18A
500MT
12 CONN
tIOG V11.W
TONRI9b50UK C4 .
I
OF
12816
ANT RF AMP .4
T
59 R22 50
C4 (47
Rh 470
3 4 .WO
/12 C3 W
50 R2 3.3K
C188 +- CI8C +A
NOM ''A'' LEAD MUST BE CONNECTED TO POSITIVE Ili SIDE OF
WOW ICONIC
POWER SUPPLY, RADIO WILL NOT OPERATE AND DAMAGE T
TO COMPONENTS WILL RESULT IF CONNECTED OTHERWISE.
9 AMP 13. 9V
"A" !IAD OHO
EMITTER COLLECTOR 14V DC
ON OFF SWITCH
OS 401 COMTI
C2I
C
SPARK
PTAH
BASE
TRANSISTOR CONN
11,19 VIEW'
I
NOTES:
CAPACITORS - Decimal values in MF, all others in MMF
unless otherwise specified.
VOLTAGES - Measured from point indicated to chassis
with a VTVM. No signal input. Tolerance +109t.
MOTOROLA MODEL 94M1
INPUT VOLTAGE - I4V DC.
TUNING RANGE - 540 KC TO 1610 KC (For alignment see page 82)
IF FREQ. - 262.5 KC.
LL 128 L3 CONNECTION DETAIL
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA MODEL 94M1 (Continued from page 81)
SERVICING PRECAUTION - When servicing this re- CIRCUIT SIGNAL TRACING - Defective stages can be
ceiver, probing with a screwdriver (checking for spark to located by injecting a signal from stage to stage. A signal
ground from various points) must be avoided, because the generator with a 400 cycle output can be used for this pur-
plate power is obtained directly from the storage battery pose as it has a source of RF andaudio signals for checking
and high currents can flow through the components causing the respective stages. In the transistor stages, the signal
permanent damage. The transistor stage is especially sus- is injected between the base electrode and chassis; in tube
ceptible to damage from this type of check. If the tran- stages, the signal is injected between the input grid and
sistor BASE electrode is shorted to ground (either directly chassis. The signal is injected from stage to stage until
or through any other path) the BASE bias will be removed the defective stage is located, and then the defective com-
allowing excessive current to flow through the transistor ponent is located by resistance and voltage measurements.
causing permanent damage by melting the indium junctions This system of servicing will locate defects in stages
in the transistor. caused by faults in the signal paths where the defect does
not show up as a voltage reading difference.
TUBE CHECK - Substituting a known good tube for a CAUTION: When using asignal generator as a signal source
suspected one is the best and only check recommended at a .5 mf 100V capacitor must be used in series with the
this time. ground lead to prevent damage to transistors.
ALIGNMENT
The following alignment procedure should be performed with receiver covers in place. Connect an output meter across
the speaker voice coil, set volume to maximum. Attenuate signal generator output to maintain 1.79 volts on output meter
at all times to prevent overloading the receiver. Refer to alignment detail for adjustment locations.
GENERATOR
GENERATOR FREQUENCY
STEP 1 CONNECTION (400 cycle mod) TUNER SET TO ADJUST REMARKS
IF AL GNMENT
IAnt recept thru 262. 5 Mc Hi end stop 1, 2, 3 & 4 *Adjust for maximum.
.1 mf & chassis
1.
RF ALIGNMENT
1Ant recept thru 1610 Kc Hi end stop 5, 6 &7 Adjust for maximum.
dummy (see fig.)
2.
NOTE. Do not perform steps 3, 4, 5 & 6 unless the tuner has been tampered with or components have been replaced. Re-
move the escutcheon and dial background plate to expose the core screws. Before proceeding with step 3, back the tuning
core screws 7/16" out of the coils to eliminate their effect on trimmer adjustments.
3. Act recept thru 1610 Kc Hi end stop 5, 6 & 7 Adjust for maximum.
dummy fig.)
4, 1200 Kc Tuner carriage 8, 9 & 10 Adjust for maximum using
9/32" from alignment tool Motorola Part
hi end stop No. 66A76278.
If
5. 1610 Kc Hi end stop Adjust for maximum.
5, 6 & 7
6. Repeat steps 4 & 5 until no further increase, then cement tuning cores n place; step 5 should be last adjustment.
ANTENNA TRIMMER
7. Weak station With radio installed in car and
7
around 1400 Kc antenna fully extended, adjust
antenna trimmer for maximum.
*NOTE; The cores of the IF transformers are adjusted from the top of the can by using a hex alignment tool such as shown
in detail. This is accomplished by first adjusting the top core and then dropping the tool down until it makes contact with
the bottom core.
PLUG TO FIT RECEIVER ANT CORE RF CORE OSC TRIM
TOP CORE
ANTENNA RECEPTACLE 1200 KC 1200 NC 1610 KC
1ST IF 2625KC
-_ _131 "F TO RECEIVER BOT CORE
TO SIGNAL
GENERATOR -.ANTENNA
RECEPTACLE ANT TRIM
0 MMf TOP CORE
1610 AC
METAL SHIELD CAN 2ND IF 262.5KC
L _ _ MUST BE ATTACHED
TO PLUG
0 BIT CORE
DUMMY ANTENNA DETAIL
O
DV lADS
HEX
AUGNMENT u C
TOOL
-p NOM
IIII -61 0
III
Ng - 0
O
BIAS DINT
ANT
RECEPT
TOP VIEW FRONT VIEW BOTTOM VIEW
IF ALIGNMENT DETAIL
ALIGNMENT POINT LOCATION DETAIL
82
VC
36_,6X 19X .15V @ BASE OF DRIVER X-SISTOR
1000 KC TO 262.5KC 262.5KC TO 400 CYCLES I°400 C3YXcirs' 14 AT 400 CYCLES FOR 1W OUTPUT
I
MN -29 OR
12AF6 12AE6A 2N473 2N176
12AD6
IF AMP DET-AVC-AF AMP DRIVER PWR AMP
CONV
11 . 2V ,2V 10.5V .80 .85v T4
0
2. 2C1
0 E2
ad 3.211
PLATE
0-)
77
r
NW
R13 9.5
X
ON -OFF SW
L4 ( Oct Rv* E3
"A" LEAD
R9 560 7.5 AMP
DIAG 630552057-0R
R4 1.5M et 0 0 0 %.-Cilf +13.2V D
r MM
R6B A+ +
NOTES: El C16
of VOL TC1213 C12C
Capacitors - Decimal values in MF. All others in PLATE
200MF T700MF TPARK
R6A
MMF unless otherwise specified. TONE
Voltages - Measured from point Indicated to 1M
cc MODEL 102 SCHEMATIC DIAGRAM
chassis with a VTVM1 +10%. f signal input. cc
Input Voltage -13.2V DC. -=--
C5 CONN eLuL TO PiT RECEIVER
Tuning Range - 540 to 1610 KC. MATERNA RECEPTACLE CAUT ION
IF 262.5 KC. PLATED PANEL WIRING LEGEND
AHERAMR 70:14;4.: IM B takz. F !LAMENT r AVC "A" LEAD MUST BE CONNECTED TO POSITIVE 14-1 SIDE
OF POWER SUPPLY. RADIO WILL NOT OPERATE AND DAMAGE
DUMMY ANTENNA 1,..-T TO COMPONENTS WILL RESULT IF CONNECTED OTHERWISE.
ANT CORE POINTER OSC CORE RF CORE 2 1 I I 2
1020 KC AD1 CAM 01020 KC (91020 KC 6 I I 5
I 3 BASE COLLECTOR
4 I 5 I 3 4 17 EMITTER
T1 CONN T2 CONN
(LUG VIEW) ( LUG VIEW) EMITTERrfCOLLECTOR
BASE
2N573 MN -29 OR
2N176
TRANSISTOR CONNECTIONS
(LUG VIEW)
13 & T4 CONN
(SIDE VIEW
/- 7TOP MOTOROLA
Top Ll TOP L3
K
ROT
MODEL 102
ANT TR M
0
RF TRIM OSC TRIM 0 BOTTOM SIDE Br IF OITOM SIDE
COMPONENT S IDF
2ND IF
262.5 KC
1 Used in 1980 Dodge cars,
1610 KCC) 1610 KC 0 1610 KC 0 COMPONENT SIDE 262.5 KC Models PD1 through PD4,
MODEL 102, 302 ALIGNMENT POINTS LOCATIONS CORE TOOL ALIGNMENT DETAIL
for alignment see p. 84.
ANT G G G G VC
- 6X 10X 45X 15X .15 VO AT GRID Of 12AE6A
1000 KC 1000 KC 1000 KC TO 262.5 KC 262.5 KC TO 400 CYCLES AT 400LTS
CYCLES FOR I WAIT OUT
I I 1_ I 6.1 I
I2BL6 12AD6 120L6 I2AE6A
0
ANT 271573 2N176
RF AMP CONV IF AMP DET-AVC-AF AMP DRIVER
RECEPT PWR AMP
11.2V 11.20 11,20 9.2V
SEE SERVICE MANUAL
dA 5_12_ 7
- 50 SERVICE NOTES
.. Ti -,2,
_.eov2 . a 11.2V 4F : : -II-, tli
C 27 [-- I 4- -IA 0
-...- B
AD 1 I..., c 4 REA 14ScPEEpArKE R
I
6 I
6
0 13
g7 ,, a 31 -14- 1"I" UMPER
I
_
..;:- 4
06 0
i Cis _
Co E3 i
L Fi 41- 3
-- 1._ _ _I - ". 1
""f L4
- - '..
.0 - R18 10 W
Fe'
-- L _ ._ _ _I I . od .5n 0) an
IMAGE '-'0
41
2 TRAP 2 X . 0
-__ o IC18
I'rIr
_ _ 11-___
,s,
IrCi. 00
" Vfil 17
SP ..r(
g
,,
;:'
,.; IC CV 77 77
s
S 0 M
,,, OE
_ ' I
REAR SPKR 0
-.8" R3 22M
81
AAnt ,.-
BD 3 gd
1
I-5 rr
i 164 R20 CONTROL
15
V)
1-]
11._ , -
.01.'1 DUAL
2N176 0
PWR AMP PLN---
ENL /71
'Tel/O.-21:F'
175 NOM
- ....L--
I x -,
__...._ 100
r 7 IM __C211
. L6 E2 til
I-' RI6 0 7-5 AMP
NOTES: .:, 12 84
Capacitors - Decimal values in MT. All others in rr raw
_.__
6T4K Ron8C11pL_. 0
.
ON -OFF'
- -21
+"A" LEAD
13.2V DC
VOL AI- C13A CHB SW C14
WAF unless otherwise specified. 5 Z
c.,, RIIA I.3M 500INF .5
R..
Voltages - Measured from point indicated to
chassis with a VTVM, +10%. No signal input.
Input Voltage - 13.2V DC
Tuning Range - 540 to 1610 KC.
IF - 2625
ALIGNMENT MODEL 302 SCHEMATIC DIAGRAM
_ 'Ig
'I- - TONE
&
CIEli .003
1
-
I 100MF I
_
(M,Y,(3L
C7'''Cri
El
I
I- IIA"
i
_
C16
SPARK
-
,P [LOT LIGHT
1 I3.2V DC
tIl
til
t.)
til
t.../
PLATED PANEL WIRING LEGEND
- I-,
GENERATOR
STEP CONNECTION
KC.'PLATE
Connect an output meter. across the speaker voice coil. Set volume to maximum and tone to high. Attenuate signal genera-
tor output to maintain 1.79 volts on output meter at all times to prevent overloading the receiver.
GENERATOR
FREQUENCY
(400 cycle mod) TUNER SET TO ADJUST REMARKS
Mr B+ .a. FILAMENT
r r. IF, CONV AVC
/1- 7
r. RF AVC
/
C)
C)
i"
I
I
I0
`.ems
T3
C)
CONN
i
(7CO)
0
PJ
TOP
IF ALIGNMENT ,/
,'..7,, ti
TOPp'
1. Ant recept thru 262. 5 Kc Hi end stop 1, 2, 3 & 4 Adjust for maximum. s
.
rod capaci- 1 6
I tor & ground . Ti)
RF ALIGNMENT eor,..
Liilittf cr.,
2. Ant recept thru 16 10 Kc Hi end stop 5, 6& 7 Adjust for maximum. 0 tt
dummy antenna
-=1614-Agiler'
.,-",---.,--0"...,,, P:I
I DUAL
NOTE: Do not perform steps 12 3 4 5 6 7 PLN-ENL
T4 CONN
3, 4, 5 & 6 unless the tuner has been tampered with or components have been replaced, Be- II
fore proceeding with step 3, back tuning cores (of ant, RF & osc only) out of coils to eliminate their effect on the trimmer t 00
adjustments. 1.1
I
3. Ant recept thru 1610 Kc Hi end stop 5, 6 & 7 6 i 1
5
Adjust for maximum. I 5 I 3 I 7
4 i
411.7
dummy antenna 12 3 OO
Iri 112
.. Ti CONN
4. 1020 Kc T2 CONN 014,Q- 0 1-1
Tuner carriage 8, 9 & 10 Adjust for maximum. (LUG VIEW) (LUG VIEW)
49/64" in from Cd CONN Z
(LUG VIEW)
hi end stop
5. e,
1610 Kc Hi end stop
5, 6 & 7 Adjust for maximum. O
0
6. Repeat steps 4 and 5 until no further increase, then cement cores in place. Step 5 should be last step.
MOTOROLA gl
ANTENNA TRIMMER
4
MODEL 302 P>
7. - - Weak station 7
With radio installed in car and an-
tenna fully extkided, peak antenna around 1000 Kc (Use this material with .
I trimmer for maximum.
POINTER CALIBRATION - Tune radio to a 1000 Kc signal and adjust the pointer adjusting cam (see ALIGNMENT LOCA-
TIONS)until pointer lines up with the 1000 Kc calibration mark on the dial scale.
(See page 83 for Alignment Points Location Diagram)
VC
ANT .15 VOLTS AT GRID OF 12AE6A
10X 45X 15X
6X
262.5 KC TO 400 CYCLES AT 400 CYCLES FOR 1 WATT OUT
1000 KC 1000 KC 1000 KC TO 262.5 KC
12BL6 12AD6 12BL6 12AE6A 2N573 2N176
ANT RF AMP CONV IF AMP DET-AVC-AF AMP DRIVER PWR AMP
RECEPT 11.2V 11.2V 11,2V 9.1V SEE SERVICE MANUAL
5 T2 SERVICE NOTES
6 FOR J
-©©200
soy2
6 GRN
C2 27 L3 NC°4B
sp.". 0,--.
-lir I
5
T4
4n 1 13
7 6
173400 oc .3E3(PLN EN
3 3 4 L cn R18 10 ma
LI
L
IMAG4E X ° X
I
2
m\4 40
2 TRAP
C:421 09
8 cj
172
GRN
IIHT
.80, 123 22M
4 3 L5 rr
Q,
7'1
2N176 DUAL
0
rn
-
I PWR AMP
6F/T4 e± ENL H
I 5
C4D-I-02 4
300 NOM
R7 1M C81 100 E2 O
L6
RIO 150 12.8 75 AMP "A" LEAD
NOTES: CC c 0
TA 000 +13,2V DC H
CC
650K 010113 ON -OFF
Capacitors - Decimal values in MF. All others in rr VOL
eLi± C13A Cl3B
(ON VOL I
C16
C14Ticr\-53-6" tx1
MMF unless otherwise specified. RIIA 1.3M 100MF I500MF C OS NWT ) E'
TONE
inn Iff-W5
Voltages - Measured from point indicated to N
chassis with a VTVM, 410%. No signal input. PHONO JUMPER
4M
I- '-,PILOT LICHT
13.2V DC
Input Voltage - 13.2V DC SOCKET 10 .003 tx1
0E1 SPARK
Tuning Range - 540 to 1610 KC. (LUG VIEW)
t1
IF - 262.5 KC. IPIATE
@01 CORE ®OSC CORE OANT CORE tx1
1020 KC 1020 KC 1020 KC MODEL 301,310 SCHEMATIC DIAGRAM
CAUTION
"A" LEAD MUST BE CONNECTED TO POSITIVE EH SIDE
OF POWER SUPPLY. RADIO WILL NOT OPERATE AND DAMAGE
TO COMPONENTS WILL RESULT IF CONNECTED OTHERWISE.
T3 CONN EMITTER
BOTTOM CORE COLLECTOR B6A
DUAL BLU-W1 EMITTER COLLECTOR
PIM -EN1. BASE
2N176 2N573
TRANSISTOR CONNECTIONS
moo VIEW)
FRONT VIEW WITH DIAL SCALE REMOVED T4 CONN 2 1 2
HEX ALIGNMENT TOOL
1ST IF 2ND IF 6 5
0 OSC TRIM ORF TRIM ,.., c,..., 3 4 7 3
1610 KG 1610 KC WBOT
LUBOT 262.5 KC 262.5 KC IF ALIGNMENT TOOL T1 CONN
0 Top T2 CONN
1
0 Top.., (Los VIEW) (LUG VIEW) C4 CONN
PLATED PANEL WIRING LEGEND (LUG VIEW)
B+ =FILAMENT r. RF AVC
r r= IF, CONV AVC MOTOROLA
,A
Top LY
, Top TOP
\" TOP \ MODELS
()ANT TRIM ,
1610 KC
MoPar 301
MoPar 310
0
I Automotive type superheterodyne receivers de-
signed for custom installation in the 1960 Plymouth
Lai Ll 1_0_1 IPJ cars, Models PP1 and PP2..
BACK COVER 2345 678
ALIGNMENT POINTS LOCATION
G VC
10X 36.6X 19X 3X .15V @ BASE OF DRIVER X-SISTOR
ANT
1000KC I4 1000 KC TO 262.5KC 262.5KC TO 400 CYCLES AT 400 CYCLES FOR 1W OUTPUT
ellORECEPT 14400 CYCLES11 I
CI MN -29 OR
100
12AD6 12AF6 12AE6A 2N573
I
1L NOM CONV IF AMP DET-AVC-AF AMP DRIVER
2N176
PWR AMP
11. 2V 11. 2V
Ll 10. 5V .85V
5 2
T4
T2 , 7 BLU
C4 15
2 .8V 7 4__T1__ 2.2(1
6 11.2V r- GUN
8
F t I I 6 .PLN-
I E3
L2 C5A® O. 3 . 2S2
NOM
53C) I
Er
"Cr
CO PHONO , I
RECEPT
(N.
(LUG VIEWI - -
ALTERNATE
C5B POSITION OF L4
360 JUMPER
NOM ww
4 I
R13 9.5 It
ON -OFF SW
(ON VOL E2
L4
CONT)
R4 1.5M 7.5 AMP 4.
aTo--ce'ro-sitit
NOTES: R6B A+ 4- Lft "A" LEAD
VOL El
Capacitors Decimal values in MF. All others in Cl2C C16 13.2V DC
1M C10 01 T200 MF 700MF
MMF unless otherwise specified. R6A PLATE
Voltages - Measured from point indicated to TONE 'SPARK
1Mc
chassis with a VTVM, 4-10%. No signal input.
O Input Voltage -13.2V DC.
C5 CONN CAUT ION
Tuning Range 540 to 1610 KC.
IF , 262.5 KC. MODEL 101, 110 SCHEMATIC DIAGRAM "A" LEAD MUST BE CONNECTED TO POSITIVE 14-1 SIDE
OF POWER SUPPLY. RADIO WILL NOT OPERATE AND DAMAGE
PLATED PANEL WIRING LEGEND
TO COMPONENTS WILL RESULT IF CONNECTED OTHERWISE.
B +Jaz F I LAMENT r rAVC GRN
L3T L2 / BASE EMITTER COLLECTOR
TOP TOP TOP
EMITTER COLLECTOR
I I 2 BLK BASE
2N573 MN -29 OR
4 15 I 3
13 CONN 2N176
T1 CONN 12 CONN (TOP VIEW)
(LUG VIEW) (LUG VIEW)
TRANSISTOR CONNECTIONS
( LUG VIEW)
POWER TRANSISTOR REPLACEMENT - When replac-
1 2 3 4 5 6 7 8
ing a transistor, be sure transistor insulator is in place IE POINT
and greased and that the mounting screws are securely and
evenly tightened. MOTOROLA
POWER TRANSISTOR INSULATOR - When replacing a
power transistor or power transistor insulator, be sure to TO SET PUSHBUTTONS
coat bothsides of insulator with DC -4 grease (Motorola Part MODELS
No. 11M490487) to insure proper heat dissipation. 1. Turn receiver on and allow to operate for fifteen min-
utes before setting pushbuttons. MoPar 101
DRIVER TRANSISTOR REPLACEMENT - When replac- 2. Unlock pushbuttons by pulling them out. MoPar 110
ing a driver transistor, grasp the transistor leads (between 3. Accurately tune in a station desired for pushbutton setup.
transistor body and plated chassis board) with a pair of long 4. Lock one of the pushbuttons to this station by pushing it
(For alignment points
nose pliers to prevent excessive heating of transistor body in firmly.
during soldering operation. 5. Repeat steps 3 and 4 for remaining pushbuttons. refer to page 85)
G 3 VC
10X 36. 6X 19X 3X .15V @ BASE OF DRIVER X-SISTOR
8-
1000KC 1000 KC TO 262.5KC 262.5KC TO 400 CYCLES AT 400 CYCLES FOR 1W OUTPUT iv I
1 4400
ANETP T I
©
MN -29 OR
12AF6 12AE6A 2N573 2N176
IF AMP DET-AVC-AF AMP DRIVER PWR AMP
II 2V 10, 5V ,8V .85V T4
2 T2 , 7
BLI1) 2.211
II, 8V O GRN
2 rL i I i 3r 5
0 T3 RN PLN-
C13 E3
SPARK .2n
PLATE
4 3
11T 721
I
IF-.>
'7. R12 5.6
6
1
I
-7J
R1.3 9.5
ON -OFF SW
(ocoN vox. E2 "
L4 NT) LEAD
R9 560 7.5 AMP
R4 1.5M 111--ViAM- si 0130 4-a( +13.2V DC
R6B 0+ 0 4-
VOL El C16
1M C10 r.01 200MF 700MF PLATE
IC128C12CT ISPARK
TONE
ORF CORE 00SC CORE (DANT CORE 1Mc CAUT ION
I
1020 KC 1020 KC 1020 KC ce "A" LEAD MUST BE CONNECTED TO POSITIVE 1+) SIDE
= OF POWER SUPPLY. RADIO WILL NOT OPERATE AND DAMAGE
TO COMPONENTS WILL RESULT IF CONNECTED OTHERWISE.
NOTES:
GRN Capacitors - Decimal values in MF. All others in CD
©
16U11 MMF unless otherwise specified.
Voltages - Measured from point indicated to 0
O ® O
BLK chassis with a VTVM, -I-10%. No signal input. 0-
0 ® Input Voltage -13.2V DC. CD
IC: C5 CONN
0 13 CONN Tuning Range - 540 to 1610 KC.
(TOP VIEW) IF - 262.5 KC.
00000 PLATED PANEL WIRING LEGEND O
Ll L2 / B FILAMENT r = AVC
FRONT VIEW WITH DIAL SCALE REMOVED TOP TOP
TOP: TOP a
OSC TRIM ®RF TRIM 1ST IF 2ND IF
1610 KC 1610 KC QBOT LI) BOT
262.5 KC 262.5 KC
() Top ®TOP O
1
4 i 5
Tl CONN T2 CONN
(LUG VIEW) ( LUG VIEW)
1 2 3 4 5 6 7 8 'NILE POINT
ce
C
I
z BASE EMITTER COLLECTOR
EMITTER COLLECTOR
0 BASE
2N573 MN -29 OR
2N176
TRANSISTOR CONNECT IONS
BACK COVER (LUG VIEW)
ALIGNMENT POINTS LOCATION
FRONT VIEW SIDE VIEW
21K I
.5
1,80
.VW
R2 IM
Ri
'
R3 33K
TOP 0 0 BOT BOT Q 0 TOP ANT CORE RF CORE Q OSC Q RF TR IM OSC TRIM 0 ANT TRIM ANT
2ND IF 262.5 KC 1ST IF 262.5 KC 1200 KC 1200 KC 1200 KC 1610 KC 1610 KC 1610 KC RECEPT
° 600 °"
ALIGNMENT LOCATION DETAIL
7
C8 C6 C3 R3 C7 R5 R4 12FX8 T1 C15 R6 12BL6 T2 C10 R9 R13 C14 R8 C13 C11 R15 MN53
RF AMP IF AMP TRANSISTOR
& CONV
R9 R8 4.7
1114101 RII 100K
R2
VOlyrz.
C2 0
C5
Cl
IHLDI RI3 33
C4 R16
R17 RI? 3.3K
.11 - RIB 22K
Nee
RIB 820
o000
Gi CAUTION
BEFORE CONNECTING ''A" LEA BATTERY POLARITY SHOULD BE
,
ZNII6 CHECKED AND POLARITY REVERSING PLUG SHOULD BE CHANGED
CORRESPONDINGLY, OTHERW SE SET WILL NOT OPERATE AND
TRANSISTOR 12F8 DAMAGE TO COMPONENTS WI L RESULT.
PARTS LOCATION R22 C16 R19 R18 R21 R20 PWR AMP C17 R 4 R17 DET-AVC-AF-AMP 14
E3 T2 C4 C9 T3 E2 C12 R13 V4 R14 R12 C13
CHASSIS REMOVAL C2 RI R2 T1 El C6 C7
1. Loosen two back panel mounting screws 5 or 6 turns (a
coin can be used for a screwdriver) and remove panel (if
necessary, press thumb against bottom center edge; the -I+ -1-- -114-H C
panel will swing free, allowing easy removal). El & E2 CONN
2. To remove cabinet back, remove 2 cabinet back mount- -,
ing screws located under batteries; then remove back.
3. Remove volume and tuning knobs,
t\D
4. From front of cabinet, remove 2 chassis mounting
screws and volume control mounting palnut.
5. Unscrew earphone jack mounting nut, 0
6. Unsolder chassis leads.
7. Remove chassis from cabinet. O
C/1
1ST IF 2ND IF 3RD IF 1-3
OSC CORE ANT TRIM OSC TRIM
1620 KC 455 KC 455 KC 455 KC
535 KC 1400 KC
R5 V2 C5 R6 R7 R9 R8 R10 C8 V3 C10 R4 Cli C14 R15 V5 R19 til
VI L2 R3 C3 Cl trj
NOTES:
t:1
CAPACITORS - Decimal values in MF. All others in MMF,
unless otherwise specified.
VOLTAGES - Measured from point indicated to ground or across
R15 100
points indicated with a VTVM. +IA. No signal in. "Anr
T4 CONN
TUNING RANGE - 535 KC to 162D KC.
SOT VIEW) R16 3.3K
E3
IF - 455 KC.
Resistances measured with transistors removed from associated DR EARPHONE
JACK
V3
V2 circuitry.
t Ground 4367 OR
4366 OR ,I_-
' COLAS
214483181 er
2403931 V5
2140 IF AMP 714407 OR
ALIGNMENT POINTS LOCATIONS 1ST IF AMP 5
PNP TRANSISTOR CONN Bu
PNP Vd ZN6331131
E2 PWR AMP
4315 OR
L2
C9)139 191 214362181 PNP
VI C7)190
DRIVER R17 120~
21441 OR El .
r PNP
214486181 a! 1
CONY C12
15 72 T3
PNP TI 6htf TEST SRN
1.1 RECUT E4
8.4V RII
2 . witt
__C. VOLUME RIB 3.3K
I. 45V asP4.1,
10K
214407 OR 1---4,5V
P7I4N6i123AM181P
4
0 PNP
i110)14.
R19 120
MM -17(
/ ON -OFF SWITCH
4. ION VOL CONTI
2
4
5
4 3
1 5
71. T2, T3 CONN
BO. .IF" )
8,b9P 1.02 CORN
MOTOROLA Chassis HS -728, Models L12G, L12N, Power 8 Series
PLATED CHASSIS WIRING AS VIEWED FROM TOP (COMPONENT SIDE)
EMI/4 4APACITOR FRAME 4.1K
11
+
/--
BRN 1.5V
RN
is,a2,418648/ 64
146
Cr( RD
OR :50,13tp 9 e.
SCI PINP AMP
SP?
...1 OM-acc SV.I'CN
53 ii
4.4662N483191 ION VOL corm
ul "r1S318/
1ST IF AMP
tttlt e VI !E
IS OR 244362I8I
AF
i; tjt
Vv.4 Cl2 p______,
0/ 0, ......____1144"
.1491. CON, MTC PPK
Rs
4146/041 1301(tf,
a 611 OK
ROE
CIN
5.7rES CAPAC IT 45 PICIMAt vA, as ISMS AL, 1)13(95 IN T414 I P94R,, ISE SPEC 111 PLAETV. PS COMPOWN' SIN
1ST IF ?NO It 350 IF ON SCEEMAIL
155 KC 455 KC 455 KC 5:111
- E8 C -5-
revues In Mt, Kr ..115er5 r MW unie15
5 4
I I 2
ref,- R' nttescsted Is ]r. urd trr &K ass 111110
I I
tt ,It'. a vWM , 4 I I
53
R.A15a 517 KC '^ I623 -4+ -F -11144-
1 2
-1;5 KC 114E2 CONN
TRANSISTOR CONN
rn e!SurtC Ire . asSlridir 42 CONS 1 12&13 14 CONS
41.1, 144:
63
Cr, tt 1 EARPHONE R19 100
LACK
47 V3
4368 4363 \04 V6
2514713W 714133,4 ii 214607 Or -14I\-4\
15' IF A.Mu 2150 IF AMP BI 5
21463314.1 4.5V-tr-7
11 ItsP PNP PRA AMP
L, , V4
55C CORE A'.' TRIM OSC KRIS j3 C4)1.39 4+ 4315 a PNP
532 KC Mk KC 1620 KC 4315 or
11062181 621 123
214362183
A/ AMP
4314R
15 PNP
32 PNP
ESI
5,-e5
C13 6W E4
5
Z9P
R22 3.3K fro
VI
MI I or T
NOVO, L _2 J 6
CONY V/
PNP X. 211181/ t.r 4.59
-2/1033181
CR PROP AMP
PNP
RZI 120
ANY \.1
LI
MOTOROLA Chassis HS -729, Models L13S, L13W, Power 9 Series
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MODEL CHASSIS
MOTOROLA L14E HS -730
I?
(ARNOW
11""''
JACK
RANGER 1000 SERIES
vI ve 42_1 pi
1N11117 2NI108
2117111
RI AMP /AMR ORIAR
PNP PNr
PNP
13
12
(.i;f1.v.
CII
OM
R17
-
VOT
2.5
5J 5
a. a.
4/
T71.
IN 8
OSC 453
PNP
P01,41 --H
1(1 (1-H) Nous.
CAPACITORS - Decimal values II NV all others in MN,
all --(11- unless calxrvoisa spealled.
-I+ -1- -I I. I- V011AaS - Mea,uredIrora pm! Indicaled la Nrel.nt c-
KreSS points indicated rolls a MR 410%. 1A1 sy,i:
TUNING RANGE *IS KC IN 1.1 KC.
74 CONN
-
T1 TO T. TS CONN TRANSISTOR CONN
111/5 CONN 455 KC.
ma VIP.: Resistances measured wItil ansIst, ren,
II CONN
associated orrudry.
4_ Ground
ALIGNMENT POINTS
ANT TRIM RF TRIM OSC TRIM RF CORE 1ST IF 2ND IF 3RD IF
OSC CORE
1400 KC 1400 KC 1620 KC 600 KC 455 KC 455 KC 455 KC
600 KC E2
R17
C7 Cl C5 R3 R29
V3 V4 V5 V6 V7 V8
V2 V1
2N1109 2N1107 2N1108 2N1110 2N1111
2ND IF AMP
2N238
DRIVER
-1 2N185
PWR AMP PWR AMP
2N185
OSC RF AMP MIXER 1ST IF AMP
C11 C12 R12 R13 R22 C16 I R25 R27
R8 R5 C9 R7
R6 C6 C2 C19 R2 R1 C10 R18 R10 R11 R16 C14 E2
ALIGNMENT POINTS & PARTS LOCATIONS
91
VI
2NZ3fi CHASSIS REMOVAL
PWR AMP
1. Remove cabinet back by inserting a coin into the
cover
opening slot and twisting until cabinet back is free.
Z. Remove earphone jack mounting nut and washer.
3. From inside cabinet, remove battery holder and bat-
teries.
4. Spread cabinet slightly at top and bottom (points A & B)
until chassis is free of chassis retainers (C & D) at top and
El bottom of cabinet; then lift up chassis at speaker end of cab-
Soon C I
inet until it clears the chassis retainers (C&D- see CHAS-
SIS REMOVAL detail).
5. Lift chassis up until it is slightly above speaker, then
slide chassis over speaker so that the chassis is free of
chassis retainers (E & F) below earphone jack. Cl)
ANT TRIM OSC TRIM 2ND IF 3RD IF
1400 KC 1620 KC 455 KC 455 KC LOCATIONS 6. From under chassis, loosen speaker mounting screws
CHASSIS POINT El' CHASSIS until speaker mounting brackets are loose enough so that
RETAINER RETAINER
O
the speaker can be removed.
7. Lift chassis, speaker, and battery holder out of cabinet.
8. Before replacing chassis, mount speaker, then insert
tuning gang end of chassis into cabinet, spread points A &
B of cabinet, then lower other end of chassis into place
under chassis retainers C & D (make certain battery leads
are dressed under and away from antenna). to
9. Place battery holder back into the cabinet slots as orig- tn
ON OFF SWITCH inally found.
(ON VOL CONTI
NOTES:
CAPACITORS - Decimal values in Mi, all Milers in
4
Main differences of 4V44 unless otherwise specified.
VOLTAGES - Measured from point indicated to ground
5
-Chassis or across points indKated with a V2Wil,+ 106.
- HS -732 11 CONN TI. T2 T3 CONN
No signal in.
TONING RANGE - 535 KC to 1620 KC.
(B C 11001. '11.1 T4 CONN
- 455 KC.
(DOT V1[111
Resistances measured with transistors removed from
( .) CHASSIS CHASSIS BATTERY associated circuitry.
--(C)-- PCIAITEP POINT"A" RETAIPER HOTTER
-i+ TRANSISTOR CONN
1.0 REMOVAL OF CHASSIS
VI V2 V3 E2
2 NV235 13
El 6E2 CONN 2111108 2141110 2141111 V4 bf
R AMP
CONV 1ST IF AMP 2ND IF AMP 6. CLOS 214I113
DRIVER
T2
5 61
C le 5 RI? 1120
EA +
63v
471C 101(611f4'
-41.4 VOL
601141
5
I OK
. -0 1-11
18 2
r- J J
51 .01 Tk.
CI
RID /03
vVVV
CUB
Diagram of CHASSIS HS -789 (See insert for differences of HS -732) +Imm
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA MODELS
A1B,N,R,W
CHASSIS
HS -744
ALIGNMENT
GENERATOR
GENERATOR FREQUENCY
STEP CONNECTION (400 cycle mod) GANG SETTING ADJUST REMARKS
IF AL GNMENT
1. Grid of cony (pin 7, 455 Kc Fully open 1, 2, 3 & 4 Adjust for maximum.
12BE6) thru .1 mf
& B-
RF ALIGNMENT
2. Grid of cony (pin 7, 1620 Kc Fully open 5 Adjust for maximum.
12BE6) thru .1 mf
&B A
SPKR
LOOP LEAD Cl R1 R6 12BE6 C5 T1 C2 R2 12BA6 R3 R5 LEADS C4 13 R4 35W4
(GRID SIDE)
Us
LOOP LEAD
OSC TRIM
1620 KC
BOT ©0
1ST IF
TOP BOT 00 2ND IF
TOP
INTERLOCK
(AVC SIDE) L2 455 KC 455 KC T2 5005 12AV6 El CONTACTS C6
ALIGNMENT POINTS AND PARTS LOCATIONS
G/ID7.11, 12E3E6 128 A) 12AV6
DET-AVC-AF AMP
5005
PWR AMP
II
I 2 3
III!
a 5 6 7
CONV IF AMP El CONN
11 & T2 CONN El ,AS VIEWED 'EOM PRINT. SIDE,
MOT VIEW I
i
2V 4 T2
5 5
6
7 ton T3
TI 12 7 5
gen
r
2 5
I 1-13 2-5
2
TPAl
L
E'T
_
3L . _J
2
250
TOTAL 7 3207
RI 22K
I .4'11 Re
F4T,,CI 5
OL
1M
47.
r R3 3.3M
T3 CONN
ROT VIE.,
" R6 1K
35W4 CAA
+0 C58+0
NOTES: RECTIFIER 3051F T SOME
CAPACITORS -Decimal values in ME, all others in MMF unless
Otherwise specified.
VOLTAGES - Measured from point indicated to 8- with a ON OFF
INTERLOCK SW
VTVM. +10%. no signal input. 1200609, AC in.
ION VOL
TUNING RANGE - 535 KC to 1620 KC. 120V AC -DC CONTI
IF - 455 KC.
DOT
B- 5005 12BA6 12BE6 I2AV6
PLATED CHASSIS BOARD WIRING LEGEND
I 3
8+ _f. AVC -.FILAMENT L2 CONN
.cer VIEW)
93
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA MODELS
A2G, N, P, W
C1N, W
CHASSIS
HS -745
HS -749
1st IF
C2B, P, W HS -749
2ND IF OSC TRIM
455KC 455KC 1620KC C3G, S, W HS -750
BUT TOP BOTTTOP C3G-1, S-1, W-1 HS -750
C7 L2 R8 R3 C2 Cl R9 R4
TO REMOVE CHASSIS FROM CABINET
1. Remove back - 2 screws hold it in place.
IR M. 2. Pull off volume and tuning knobs (place string under
knob).
3. Remove screw from cabinet front and remove chassis.
R2
4. To free chassis, unsolder appropriate leads.
12AV6
TO REMOVE CLOCK CRYSTAL (Models Cl, C2,C3 Series)
12BA6
1. Pull off clock knob (or knobs). Insert a screwdriver
C3
between the cabinet and bottom edge of the clock crystal
El (near 6 o'clock on clock face) to release catch, then lift out
crystal.
ft\ R5
TO REMOVE CLOCK FROM CABINET (Models Cl, C2, C3)
vApoir R6
5005 1. Remove 2 cabinet back mounting screws and remove
TI- tifiriEF cabinet back.
2. Unsolder 3 chassis leads connected to clock.
z C4
3. From rear, remove 4 clock mounting spring clips.
4. Pull off Lazalarm button from cabinet (Model C3 only).
RI--
" -
-05
5. Remove clockcrystal (see "To Remove Clock Crystal");
remove clock from front of cabinet. NOTE: On Model C3
Series, install clock into cabinet before replacing Lazalarm
button.
12BE6
-
/LEADS 'Models C4B, P, S, Chassis HS -7524
R7 - CLOCK
C6
ANTENNA LEADS 35W4 INTERLOCK
CONTACTS
IA2 SERIES
ONLY) IC1, C2, C3 is practically the same electrically,'
ill Ibut includes dimmer and appliance
SERIES ONLY)
I
ALIGNMENT POINTS .AND PARTS LOCATIONS Loutlet._
AL IGNMENT
Use an isolation transformer between the power line and the receiver. if not available, connect low side of generator to B -
through a .1 mf capacitor. Connect a low range output meter across speaker voice coil and set volume control to maximum.
Attenuate generator output to maintain . 40 volts on output meter to prevent overloading.
GENERATOR
GENERATOR FREQUENCY
STEP CONNECTION (400 cycle mod) GANG SETTING ADJUST REMARKS
IF ALIGNMENT
1. I Grid of cony (pin 7, 455 Kc Fully open 1, 2, 3&4 Adjust for maximum.
1213E6) thru .1 mf &B-
RF ALIGNMENT
Grid of cony (pin 7, 1620 Kc Fully open 5 Adjust for maximum
2. 12BE61 thru . I mf &B .
128 06 12A06 5005
IF AMP DETAVC-AF AMP
El PWR AMP
4 72
-12 7 sty 15
_LI I 2-5
31
L
- +5 E2
cl .-.MAP-41
I
r ,-7 VOL CONE
7:,; 77,4/MTG BRKT
L2 5
1 1M 1 .533
I s I
E ovn
1
I 171-*
4 3
6--- T L2 CONN TI & TO CONN
kr107
I
R3 3.3M 2W
NOTES
R6 1K
CAPACITORS Decimal values in Mr, II 01110r1 in MME unless
otherwise 504011180 AZ CI, C2 3504
C5A C513 -4- 0
VOLTAGES - Measured from eotnt Indic tes1 to B- with a SERIE ONLY RECTIFIER 50MG
VTVM. +1034, no signal input, with 200 60,AC in,
E3 CLOCK
TUNING RANGE - 535 KC to 1620 KC. '136013n CI. C2, C3/
IF - 455 KC 1200 &MAC ONLY INTERLOCK 8-
6 8- ICI. C2, C31
D SACS 121306 2006A2,"D(I-
PLATED CHASSIS BOARD WIRING LEGEND
120V AC -DC
IA21
4TI3 12E3E6
C3
a, B4 Jr: AVC AK= F !LAMENT I 2 3 4 5 6 7 ON -OFF SWITCH
E CONN
4S VIM!) IRON Miran, SUM. IfFI.VF LAOINsIrt,M
SEPIES for .e
t,t ONLY - MODEL CI, Cl
94
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA ALIGNMENT
MODELS
C5G,S,W
CHASSIS
HS -753
GENERATOR GEN FREQ
STEP CONNECTION (400 cycle mod) GANG SETTING ADJUST REMARKS
IF ALIGNMENT
11. 12BE6 grid (pin 7) 455 Kc Fully open 1, 2, 3 & 4 Adjust for maximum.
thru .1 mf & B-
RF ALIGNMENT
2. Radiation loop* 1620 Kc Fully open 5 Adjust for maximum.
3. 1400 Kc Tune for max 6
4. Repeat steps 2 & 3 until no further increase; step 3 should be last adjustment.
*Connect generator output across 5" diameter, 5 turn loop and couple inductively to receiver loop. Keep radiation loop at
least 12" from receiver antenna.
128E6 128A6 12AV6 SACS
CONY IF AMP DI I AVC-AF AMP PAR AMP
T1 1
C2 150
4-.7 2
.0047
2L Ear
%.! - .022
20
0047
22K
2
5 ID 12 L2
L2 410AN
OSC 13 CONN
COIL (BOT
330
a
(107
p p
1-9
R5 100
NOTES:
CAPACITORS - Decimal values in NM. all others in MAW 35W4
CIA +- C58 CSC
3OMF 46ME &IMF
unless otherwise specified. RECT
VOLTAGES - Measured from point indicated to B -
with a l/TVM +10%. No signal input.
INPUT VOLTAGE- 120V AC ONLY
7 Ion,
TARING RANGE - 532KC TO 1620KC
- 455KC
CLOCKEl I2AV6
5I/C5 128A6 128E6
PLATED CHASSIS
CHASSIS BOARD LEGEND 4 3 1 2. Ac 3 4 1"v ac 4 3
FILAMENT INTERLOCK
BY AVC a R6
20V 60ti
D
TA PI IANCE
OUTLET
ANT TRIM zANT 5
2ND IF 1ST IF 1430 KC
{LEADS 4
POT
455 KC 455 KC 11 CONN 12 CONN
(BOT
OSC TRIM t1301 VIEv,
BOT TOP
1620 KC
5005 El C2 Cl s L2
6 7
F
R3
to
1 12 II
th12TNN
C3
R5
r AC PWR
LEADS
SPKR
LEADS
R4 128A6 T1 128E6 R2 C4 R1 5 35W4
R6 12AV6 T2
ALIGNMENT POINTS AND PARTS LOCATIONS
95
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA Chassis HS -759, Models X11B,E,G,R MODEL CHASSIS
This material is exact for later production; X11B HS -759
some earlier sets used a different printed X11E HS -759
circuit board with different placement, and X11G HS -759
several different valued parts. X11R HS -759
,
(Continued on page 97)
SPOKE
111
n ,...,,,
,
START
roo
0000000000
ZOO (713-*
OSL
114 Of
2-1/2 TURNS
HOOK LOOP
AM,
ON SPRING NOS Ed
(FINISH)
+ )n111
GANG SET TO LOW END (532 KC)
5.Ns'Iti
10
CHASSIS REMOVAL AND REINSTALLATION
+ 10. b1711
The complete chassis is removed by opening the back
and removing the two small screws securing the chassis to r
the cabinet. Loosening the phone jack will then complete 0004100.,-i
removal from the cabinet. No unsoldering_ and resoldering r°411T
is required. The chassis is free from the cabinet and is an
operating unit that can be checked and completely repaired
before reinstallation in the cabinet.
* NO 68
ZO' 60
ANT CORE `nilA
600 KC r 7 NOP 66
0000t9, AW
ImpoTo NS
ANT TRIM
1400 KC
1ST IF
/f.11
455 KC OSL 98
OSC TRIM
1620 KC
NV 50
2ND IF
455 KC r-
OSC CORE le ;' )1001 WI
532 KC
40
ee psi 4.
3RD IF
455 KC
t.12
to
ar /
A2 2
00. zz
trs
NS 18
171
U9'
ALIGNMENT POINTS LOCATION
96
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA. Chassis HS -759, Models X11B, -E, -G, -R, Continued
SUPPLEMENTARY REPLACEMENT PARTS LIST V-1 48K644676 Transistor, type 2S-52: PNP (converter -also
replaces type 2S-30 or 2E412 used In some
Ref. Part sets)
No. Number Description V-2 48K644677 Transistor, type 29-53: PNP (1st IF -also
replaces type 2S-31, 2S-53 or 2E410 used in
ELECTRICAL PARTS some sets)
V-3 48K645867 Transistor, type 2S-49: PNP (2nd IF -also
C-5 521E645601 Capacitor, car disc: 3 mmf (some sets used replaces type 29-31, 25-53 or 28410 used In
5 mmf; when replacing, use the 3 mmf listed) some sets)
V-4 481(644678 Transistor, type 2S-54: PNP (driver - also
R-10 6B127800 Resistor, carbon: 220 10% I/4W (some sets replaces type 2S-32 or 2E406 used in some
used 25051; when replacing, use the 220D sets)
listed) V-5,6 48E644679 Transistor, type 2S-56: PNP (power amp -also
R-18 6E645513 Resistor, carbon: 50 10% 1/8W replaces type 2S-33 used in some sets)
R-19 6K644108 Resistor, carbon: 7000 10% 1/8W (in some
sets) 48A124377 Transistor, type 28408: PNP (power amp -used
6K121300 Resistor, carbon: 27,000 10% 1/2W (In some in some sets
sets)
NECNANICAL PARTS
Some early sets used a different printed Note:
.84E645320 Board, printed circuit: less all components
When ordering, specify part number found on original
circuit board and a few different valued board, and mention model number of this set. If part
number is different from that found in this parts list,
parts, and other differences in location. order by complete part number found on board and men-
tion model number of this set.
LI
I I I
4.
YEL
ON -OFF SWITCH VI**
ION VOL CONTI V5,
CONV
E- .85V
B -.95V
CI
C 8.8V
RI 5K 4
awnei 40K
.414.41
WHT
Ti
VI** T 1 31
9V - DRIVER
- WHT
B -.73V C/5 50K
E -.6V ,14*- V2**
1ST IF AMP B .37V
C -8.4V 'IRE .11tTllAPFR*
C -8.8V
R4 1001(
E-.23 V
R15 150 GU 2
C1.311501*
+R T2
B -.14V 4110,01W-40
RIO 7K OR Z1K **
3
°BARE WIRE
WITH SLEEVING*
r----
LO2
-.02V:1:20%
(NO SIGNAL IN, NOTES
Nt 711/4
VOL AT MINI
(MAYO 1 4
CAPACITORS - Decimal values in MF. All others in MMF
-%9Vdt:5()°,0 unless otherwise specified. R8 404( E -.76V
VOLTAGES - Measured from point indicated to ground
IMAX SIGNAL,
with a VTVM +10%. No signal in, volume at minimum
464%.10
B -.9V
VOL AT MAX)
(except for emitter voltages in output stage). 0.$t5.! V3** C -8.8V
Rq 2ND IF AMP
= ----I' on schematic. CB*
C -9V- PWR AMP
554 *LOCATED ON CONDUCTION SIDE OF BOARD.
** SEE SUPPLEMENTARY REPLACEMENT PARTS LIST c.10
1VHT
0 Cpl
if
E2
EARPHONE
JACK
k
PRINTED CIRCUIT BOARD WIRING
E3
4
(Shown from conduction side of printed circuit board. Components shown appear on opposite side.
To further aid servicing, the base, emitter, and collector voltages are included.)
97
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA VI
KENS
RIGHT CHAN PNR AMP 71
SPKR SPKR
RIGHT CHANKI
SPEAKER
.nt
MODEL CHASSIS RI 56K
JACK PLUG SOFFSIFO
SF 14SL 1s
HS -7 6 1
STEREO
CART I RM SOK
CARTR I IOW
PHONO MOTOR LEADS LEAD
R6 C2 RS VI R8 V2 C3 R2 R4 RI CI TO
R69 5011
n T2
6 too,
TOM
. SPKR
JACK
SPKR
P1116
art
LEFT CHANIEI
SPEAKER
Ea
Ri 56K
VT
B- SIEH5
LEFT CHAN PAR AMP
V3
TO RIGHT TO LEFT
sl 35W4
CT NOTTS.
CHANNEL CHANNEL CAPACITORS - 0.6661 values In MT,
SPKR JACK SPKR JACK all others in INK unles, olherrose
RI al R8 820
RECORD PLAYER hot ra KAY pN II ieA
DI AGRNA VOLTAGES - Measured from point
200 60 6 3 fitIA "LA1C indicated to II- with a MN
OFF
HI --sow 4,101, no signal Input,
OMY TAW Chasm Ground
1;1 vz INPUT VOLTAGE - 120V tt),AC only.
FEL A
Fat v2, Arrows on controls indtcale clock-
wise 'MAWR TI control.
V3 72 R25 R19 R12 C6 C5 Cl C3 C8 R13 R18 C13 R29 R28
C12 I RB R5 R7 R16 C7 R26 13
7. MOTOROLA
C2 C4 R20 R24
MODELS CHASSIS
1
R17 21 VI R6 R4 R8 C9 R14 C11 R22 RII C14 R27
H8-763, -792 PARTS LOCAT IONS SH16B, E HS -763 AUDIO AMP
VIA
1/2 12AX7
v2A V2B HS -792 PWR SUPPLY
6BM8/ECL82 1/2 6BMB/ECL82
1ST AF AMP 2ND AF AMP PWR AMP
RIGHT CHAN RIGHT CHAN RIGHT CHAN
R24 820K
!VW RIGHT SPKR
90 v
C51 .1005 Clli aLu TI
1
9 OUTPUT JACK PLUG & CORD
R3A ASSEMBLY c,t, PHASING
2M C15 '.". DOT
A
CsO
,6E2Z
RIGHT CHAN
2 19
SPKRS
111011MBIAL
1.2 2 0 OZ
STEREO O VI9 m +- V3A V3B
° 1/2 12AX7 1/2 6BMUIECL82 112 6BM8TECL82
1ST AF AMP 2ND AF AMP PWR AMP
LEFT CHAN LEFT CHAN LEFT CHAN
R25 820K LEFT CHAN
AIAM LEFT SPKR SPKRS
C61 .0Et, 121(, ULU T'
9 OUTPUT JACK PLUG & CORD
6 000v BLU ASSEMBLY
C16 SMF
3Ir: :
1M / E4
+C13
SOME
AMPLIFIER
+-- 2156 POWER
1227 6.8K PLUG
225v (IN v TEN
115-163
+
R28 4.7K RZ9 120
+ 0 + n+
AMPLIFIER C14A 114C --1-6400
20MF TOME
ICIMF SOME 50MF KHr
TEL T3
RECORD CHANGER
4 -LUG STEREO
CARTRIDGE
RIGHT
PHONO
OUTPUT
LEFT
ON -OFF-
REJ
la PHONE
AMPLIFIER
POWER
RECEPT
LuG IEW)
RED
5
PHONO POWER
RECEPT
(LUG VIEW)
NOTES
VI V2
RIM MOTOR
CAPACITORS - Decimal value,. in MF, all others in MW
V4
PHONO ORG EZ2.0/6V4 unless othenyn specified.
OUTPUTatat, RECTIFIER
VOLTAGES - Taken vith a VTVM I rom point ine.icatel to
LEFT
3 -LUG STEREO
LCARTR IDLE
MNu N.
+ (PIN UV IS11)1
DO
GR
HS -792
chav if,. +10%. No 1.ignal in.
INPUT VOLTAGE - 120V 60 cycle AC only.
POWER SUPPLY
98
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA MODELS CHASSIS
VIA
1/2 - 12AX7
SH17E, GL, N, S HS -764
1ST AF AMP
RIGHT CHAN o3
V IB
- 12$X1
V2
EL8416B135
SK22B,M HS -766
j osc
6 166, I 73- AF AMP
RIGHT ChAN
PWR AMP
RIGHT CHAN
40 CI7115MFPwe1
NOTES:
E., CAPACITORS - Decimal values In MF, all others In IANF
unless ofheninse specified.
VOLTAGES - Taken with a VTVM from point Indicated to
8 chassis. +10%. No signal In.
RIGHT [TUNNEL SPKR WIRING
INPUT VOYAGE - 120V 60 cycle AC only.
FOR 51(22 Where two component values are given,
upper value n for HS -7M 1SH171, and
lower value is for HS -7M 15(221.
CI9
R1.3 1WK MODEL SK22
RECORD CHANGER
*(
A r RIGHT
PHONO
OUTPUT
RIGHT CHANNEL SPKR WIRING LEFT
4 -LUG STEREO
FOR SHIT
CARTRIDGE
RIGHT
PHONO
INPUT 100K
TAPS LEFT CHANNEL SPKR WIRING OUTPUT
6 FOR 51117
LEFT
I LEFT , I 4 3 -LUG STEREO rx
CARTRIDGE 1
, CHAN , EIO
El
!M- CONTROL
MODEL SHI
I
RECEPT
RECORD CHANGER
I
112 - 12AX7
1ST AE AMP WEI Vd
r RIGHT
j LEFT CHAN 112 - 12/.1%7 ELM/6E1(35 LEFT CHANNEL SPKR WIRING PHONO
2ND AF AMP PWR AMP FOR SK22
j 6 LETT CHAN OUTPUT
LETT CHAN R26 61(
DOI
i
asu TZ E CI8
4 -LUG STEREO
LEFT
PO
CARTRIDGE MOTOR
En! RIGHT
ON -OFF
ell PHONO
OUTPUT
2
i lg. LEFT
3 -LUG STEREO
10Y CARTRIDGE
0 Eli
rU,13 au
00V
R14
Iii°1 63004447" RD 30
into. NN
: 41:12
I '113, it3
ES CO in/ 150
113-764 & HS -766 SCHEMATIC DIAGRAM + + +
'-r2g,FA CIO IGI6C TI 0
HOME 40ME 40MF V5
PILOT PILOT
- VI V2 V4
EZ81/6CM
LIGHT LIGHT algal
RECTIFIER
RECUT PLUG
CHASSIS REMOVAL (MODEL SH17) 3.Lift up record changer mounting board so that phono
power receptacle is accessible; unplug phono power plug
1. Remove the screws that mount the control panel housing from receptacle.
from side of cabinet and the record changer mounting board. 4. Unplug pilot light plug connected to chassis.
2. Lift up control panel housing so that control plug (plugged 5. Remove nuts that mount left and right channel speaker
into chassis) is accessible; unplug control plug from recep- output jacks.
tacle and place control panel housing on record changer 6. Remove 6 chassis mounting nuts and remove chassis
mounting board (so that it is out of the way). from cabinet.
Chassis HS -765, Models SH18GL, N; Chassis HS -780, Models SK24B, M, W
S.
ii
1/2 -'1!A%7
1ST AF AMP
RIGHT CHAN 1-3
MOTOROLA VIA
1/2 - UM/ ACLU
V3B
I/2 - 6EINLVECLB2
RECORD CHANGER
i 2ND Al AMP PWR AMP
C3 fro<cian RIGHT CHAN RIGHT CHAN
1
C2001 Ra 4 -LUG STEREO
26 CARTRIDGE
CNIl004 CI 11.001
SE4TER,CE.FIG
ELAURG STEREO 4,
tl Ca
va
V2B ELB4/01305
1/2 - 120X7 MYR
BASS CHAN DOUBLE PLUG
2ND AF AMP
V2A BASS CHAN 44 2.21( CONNECTING CABLES
aT IR - 12.5
:RIGHT
1ST AF AMP C21 wa C29
l it BASS CHAN
TO RECORD
CHANGER
AUVICE
50011 z2 0(.65,....7182.! RDTOK
:Ea
-a= °
2
I LETT tl §.8 BASS CHANNEL LEST & RIGHT SPAR W IR
El
CONTROL
UNIT RECEPT I CD
gl,"7,11"0 FOR SHIN
RECOROTAANGER
1 U2 058
1
1STTVA` It V5A 12 - °BIAS/CCM Ft,
s LEFT CHAN I 2 - 6 FAVECL82 PWR MOP
siw 2ND OE NAP LITT CHANAFL
OUTPUT
LIFT CHAN IT OAK sarr
4 -LUG SITREO
w n CV 12.2W CARTRIDGE
ON -1317
RIO.
E5 PHONO
PUT
S 3 -LUG STEREO
LEFT CHANNEL L CARTRIDGE
S PE paRsti: I NG
EII
g 1200
AL ONLY PT
RIB 1
RATA 4./It RN 220_ li4 150 ,
, ,.... VW AV!
NOBS:
CAPACITORS - Decimal values in AN, Al
others in MAR on., otherwise specifteit
13-765, 113-780 SCHEMATIC DIAGRAM 4C,,24 2.1 owl- 1 v6
.ik, Z86CM VI Ell
- VI
VOLTAGES - Taken with a VIVA from point V2
Where two component or rallap values are given, RECTIFIER
irNicaled In chassis. 101i. No signal in. upper value is for HS -765 ISHIFU and
INPUT VOLTAGE - 120V EC I AC Only. loner velue is for HS -TM 150240
99
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA
MODELS CHASSIS
SK36M HS -767, HS -781
SK37CW HS -767, HS -781
RIGHT CHANNEL
PHCNO INPUT VIA V2A
SK38B HS -767, HS -781
1/2 - 12AX7 1/2 - 12AX7
1ST AF AMP TONE AMP
RIGHT CHAN R IkHT CHAN
NOTES:
CAPACITORS - Decimal values in MF, all others in MW
unless otherwise specified.
VOLTAGES - Taken with a VTVM from point indicated to
chassis. ±10%. No signal in, pre -amp
connected to power amp.
MON
STEREO RIGHT CHANNEL
SI \
I UNCTION
OUTPUT
LEFT CHANNEL
OUTPUT
0
LEFT CHANNEL
PHONO INPUT
VII V28
1/2 - 12AX7 112 - I2AX7
E2 1ST AF AMP TONE AMP
LEFT CHAN LEFT CHAN PRE -AMP
Wit 6 346v
325
POWER PLUG
(PIN VIEW)
205v. R20 4.7K 2255
C13 +
PRE -AMP HS -781 SCHEMATIC DIAGRAM
R25 1200 CIA
VIA °
390
I/2-12AXT RIGHT AI AMP
2 11 4: CIO 01
VAST
RIGHT PWR MT
Zoo.
- _en .(11E1 1.:1 ED
RIGHT CHAN SPKRS
ow X
-0
si
r
V2A V4
"- RIGHT
PHON3
OUTPUT
IN-12AX7 BASS AF AMP MSS BASS PWR AMP CI7 FEET
4-tUG STEREO
LETT CHAN SPARS CARTRIDGE
RIGHT
II RIGHT
tt PHOW
OUTPUT PRO -AMP
LEFT. POWER RECEPI
SRI 3 -LUG STEREO
CARTRIDGE
(1.02 VIVO
0 RECORD CHANGER WIRING
BASS
SPAR
112-12M]
PHASE INV
t121(.05 VS TT u.
MSS 54
LEFT PAR AMP
R2 I
R211w2200 82
4,S1511
&T -if SWF
RECTIFIER
V6
OACIS
LEFT PWR AMP
PWR-AMP HS -767 SCHEMATIC DIAGRAM
RECORD CHANGER REMOVAL
TYPE - Console, three channel stereophonic phonographs
containing four -speed record changers and multi- 1. Turn the 2 changer mounting screws clockwise down
ple speaker systems. The models differ from each flush with the changer base.
other primarily in cabinet design. 2. Remove cabinet back cover, then disconnect all cables
to record changer.
3. Turn the mounting clips, located at the ends of the
PRE -AMP CHASSIS REMOVAL mounting screws so they are parallel with the mounting
screws, then lift changer out of cabinet.
1. Remove control knobs, cabinet back cover and sounding
board located inside cabinet at base of record changer; SPEAKER PHASING
board is held in place by 4 machine screws.
THE SPEAKERS MUST BE IN PHASE OR A LOSS OF
2. Disconnect all pre -amp connecting leads and remove MID -RANGE FREQUENCIES WILL RESULT. Phasing can
pre -amp; pre -amp is held in place by 2 hex nuts. be checked by momentarily connecting a 1-1/2 volt flash-
light battery in parallel with the speaker connecting leads
POWER AMP CHASSIS REMOVAL (temporarily short across capacitors in cross -over net-
works) and noting if all speaker cones move in the same di-
Remove cabinet back cover, disconnect all power amp rection (with the same polarity reference voltage applied to
chassis connecting leads, remove 6 power amp mounting all three speaker systems). If they do not, reverse the
machine screws and remove power amp chassis. connections of the speaker whose cone is out of phase.
100
VOLUME R-20, MOST-OFTEN-NEEDED 1960 RADIO SERVICING INFORMATION
MOTOROLA MODELS CHASSIS
LEFT & RIGHT Al AMP RIGHT PWR AMP SK28B, M, W HS -768, HS -774
R3 AC R2 Cl AUDIO C5 CIS R12 C7 R6 R8 C14 CIO R15 C9 R20 R27 F186,6805
R4 OUTLET C2 RI INPUT CA R30 R29 R26 Ril R7 R17 C13 824 R7 C16 LIFT PWR AMP SK29B, M, W HS -793, HS -769
SK30B, M, MC, W HS -768, HS -774
SK31B, CW, M HS -768, HS -774
,W W ,
PRE -AMP CHASSIS REMOVAL (Models SK28, SK30, SK31)
1:1110*"
NikT A110 1. Remove control knobs, cabinet back cover and sounding
.0 board (on SK31 it is not necessary to remove board) located
.4, -vs 04, inside cabinet at base of record changer; board is held in
. -4,4040 place by 4 machine screws.
4 2. Disconnect all pre -amp connecting leads and remove
pre -amp; pre -amp is held in place by 2 hex nuts.
- isrA&
ail;* Arlhar PRE -AMP CHASSIS REMOVAL.(Model SK29)
;1w40, 1. Remove control knobs and cabinet back cover.
2. Disconnect all pre -amp connecting leads to power amp,
record changer and pilot lights; open front cabinet doors
and remove pre -amp panel (located at upper left-hand cor-
...-r...Nk ner of cabinet -panel is held in place by 6 screws); unplug
....,A remaining pre -amp connecting leads and remove pre -amp
%.. it 41,04, after removing the 2 hex mounting nuts.
POWER AMP CHASSIS REMOVAL (All Models)
Remove cabinet back cover, disconnect all power amp
chassis connecting leads, remove 6 power amp mounting
PRE -AMP R31 R32 machine screws and remove power amp chassis
POWER RECEPT V7 R5 C3 RU R9 C6 R28 R14 V2 C8 R10 CII RI6 RI8 R19 R21 V4 C12 RD V5 R22
RECORD CHANGER
RIGHT-51TM
PlIONO INPUT
is
- 12AX7
V2A
112 - 12AX7
1 RI IM Y. o2 1ST AT AMP
TONE AMP ou
RIGHT CHAN
,
RIGHT CHAN C4i 4 -LUG STEREO ON -OFT
I asy '°°R20 56K .05
S
CIII CARTRIDGE REJ
STEREO ;MON
PHONO
RIGHT -STEREO UTPUT
TAPE INPUT 52.\ 3 -LUG STEREO
urr
FUNCTION:: RIGHT CHANNEL L CARTRIDGE
SI-A II OUTPUT
II PHONO
TONER II
POWER KCIPT
I LEFT CHANNEL
1 incl. I. _1
I OUTPUT SWITCH
ON SI
TUNER INPUT J
RIGHT
STEREO I; -L
TAPE
LTJ VIB V28
71 LEFT STEREO 1/2 - 12A)(7
- 12007
LIP :PROMO INPUT R2 IM 1ST AT AMP TONE AMP
STEREO MY NETT CHAN LEFT CHAN
C5
TAPE
I
JACK STRI
ON CABINET
BACK
LEFT STEREO
TAPE INPUT SI-B
C3 ,.02 PRE -AMP Bu
NOTES
CAPACITORS - Decimal values in PAF, all others in MNf POWER PLUG
unless otherwise swelled. R24 471( :PIN VIEW
VOLTAGES - TWeen with a VTVM from point indicated tu
chassis. +10E. No signal. Pre -amp con.HT.7 to power RR.
cs+
SI shown in "TUNER.' position. 'Jowl
s,
PRE -AMP HS -769,774 , SCHEMATIC DIAGRAM -
lip
SR
RIGHT CI711 Shi
R26 3.3K CI7 CHAN SPKRS TI
01-0 03 ALL
Il?-1207RIGHT AF AMP ELS4/6805
RIGHT PWR AMP tr. -. E1
.1usac
E2
enT
..._C24.1 .01
0.W _ 6 WTPUi JACK
-f PLUG & CORD ASSEMBLY
CI8
CHAIFSTFIRS T3
BO
E4
ITTIISPKR
02-A 04
C18 OUTPUT JACK
1/2-12AX7 PI AMP 0.84/61105 BASS PWR AMP
LETT & RIGHT CHANNEL
RIGHT SPEAKER WIRING FOR SK31
LEFT & RIGHT CHANNEL
CHAN 1
SPEAKER WIRING FOR SUB, 29. Ta
INPUT
NOTES
LEFT CAPACITORS - Decimal values iu ME. all others in NW
s
I
CHAN unless otherwise sped' led.
INPUT VOLTAGES - Teen with a VTVM from point indkated lo
1 liWttil chassis. 110N. No signal in, pre -amp connected.
INPUT VOLTAGE - 110V 60 cycle AC only.
L2 BASS CHANNEL SPEAKER WIRING
FOR ALL MODELS
V2-8
I/2-12AX7
PHASE INV
+. c.7
A2 F
TT, :E10
1 V2 V3 V4 V V
CI .05 ELM/61305
BASS MR AMP RET 1.3K R29 2203 R30 330 *1
,L211.0327. C51(470.
A
VI -11
112-12A)17 LEFT AF IMP
ILLV
61
CI3HL31_.__,
V6
E1114168Q5
LIT PWR AMP
ATC"
40MF GeT4OTAF
20v
V7
U4GB
RECT IF IER
PLO
0
PRE -AMP
PUP IFR7
-0:
Tc C
PWR -AMP H5-768,793, SCHEMATIC DIAGRAM
101
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
00 3 -CA) PL ATE
GREEN OCT
007- TANK
® 00 c-,/qss/s K PACKARD BELL
L3 -BOTTOM VIEW L2 -TOP VIEW CLOCK RADIO MODEL 4RC1
V2 -I 2 4 I/6 V3-50EHE
CO/VV s-/ 5-2 .0E7: F /1/11P OUTPUT -
/00v -- 56 v. /20 v
TI .y-E 6.3 (NET,:VORK) CS
isEL do
C2 1Lr7 T
1&/.75v. / 2.1 / 3/590 /.38c51 6 /00v cr
__ J
1500.0
C/A L Y .750
7 220 250 REL
4."../E0 -s 70K 3.2
T/
L/ L
(
7 4_
R/ R3 &PEE/V.
2/115G R4
2.2/11E6 VOL. /30 C4A
C6 25 V.
.047
4GCV
1-11
C7
.022 1/4-500C4
200i! RECT.
/20 v.
Ii
- sip
R2 CB
3300 .0/ RS
22 e7 3300
/7/1// YELLOW,
flIASS/5 GROUND 4 c4C
OcfD
93 Vac I /03W 2500
/70 - 720
C °A7 -AUTO -ON
60LPS - J l V3 V/ /2
' 3/\4 3/\4 4/\3
_
CLOCK MOTOR
OSCILLATOR RF VOLTAGES: ELECTRICAL RATINGS:
Measured with an RF voltmeter between cathode Line voltage 110-120 volts, 60 cycles
(pin 7) of V-1 (12AU6) and B- bus. Line voltage Power consumption 31 watts
117 v AC.
1500 kc: 2.0 volts TUNING FREQUENCY RANGE:
1000 kc: 1.8 volts
540 kc to 1620 kc
750 kc: 1.6 volts
540 kc: 1.5 volts
ALIGNMENT PROCEDURE:
S-2
Follow the steps in the chart below. Connect output
meter to speaker voice coil. Use isolation transformer ELECTROLsr TIC
between radio and power line to reduce shock hazard.
Each adjustment should be made using a minimum
signal. Connect test oscillator through a .01 mfd
capacitor to the point indicated below. Ground lead
of oscillator is connected to B minus bus.
When chassis is removed from cabinet for align- C -I D C -I B
ment, leave back attached to chassis in its permanent
position. Insert Showing Adjustments
Test
Step Connect Test Oscillator Radio Dial Adjust
Oscillator to Frequency Setting
Pin 1, V-1
1.
12AU6 455 kc 540 kc S-1 & S-2 for MAXIMUM
Loose -couple
2. to antenna 1620 kc 1620 kc Cl-D for MAXIMUM*
Tune to
3. ditto 1500 kc oscillator Cl-B for MAXIMUM
*Before adjusting C -1D, screw C -1B tightly closed.
102
/2 BEG I/2 /Z846 /2.4V6
GONI/EFTER t2 A/eRz.bc-/ER' L,E7-X7 4jAi.1.0/0 A/ -71,Z
00V
/ L3 _ O
1------13
21
G8
1
001/
e-
0 tzi
5-3 L_4 C7 6
z-
L/ s -e I 6
C2 4-7 70
1 z RS LV
o C/A _Lc /8 C/O R/ -I
7- 221e 1/4
/ LE RZ / LIC6
68 a
////// C4 SK
L____
,/
200V 61/455/5 2.211 2E0
cJ 50/IF
-7.047 150V
; ZOO/ C/0.1 670493 4
1/6- 351,/ S011 _7_ /000
/474-477/c74:47 /5-0V
se -7- ON -04-F Sh//7-CN*
iNTRLK /v/re-Lire" RED T47® 68
-5A/ ON VOL. CONT,POL 7 /Zak R/0
- GREEN, //oc, V/
v4- la 1,3
==I
w. NOTE: 77/14ER , N/7 -E L/TE_ e` OUTZ /5. r ON XRC7
/109c. 60 MAX
N/TE O4/L/' ON SRC ,/NTRLK GOES TO A " ft 9
Z/7 -e -
Ci/ ',sr/ 7-i./ SW. ON '0L. CONTROL Nv L. .
7/N1ER
1200e FRONT
C.9 FROM "-LATE To SCREEN ON .J-RC7,
ALIGNMENT PROCEDURE: C9 Rreoni RZA7C 70 C,47-110.06" 0A/ .."-Ra
The alignment of the set is accomplished by fol-
lowing the steps in the chart below. Connect output DC RESISTANCE MEASUREMENTS:
meter to speaker voice coil. Use isolation transformer
between radio and power line to reduce shock hazard. 1st I -F Coil (29077):
Each adjustment should be made using a minimum Primary, 12 ohms
input signal. Connect test oscillator through a .01 mfd Secondary, 13 ohms
capacitor to the point indicated below. Ground lead
of oscillator is connected to B minus bus. 2nd I -F Coil (29078)
S.2 BELOW S-4 BELOW
Primary, 13 ohms
Connect Test Test Secondary, 13 ohms
Step Oscillator to Oscillator Radio Dial
Frequency Setting Adjust
COOS KEG LOA/
1. Pin 7, V-1 S-1, S-2, S-3,
(1213E6) 455 kc 1620 kc & S-4 for MAXIMUM 2
Oscillator Coil (29229B)
2. Loose -couple Primary, 1 ohm
to antenna 1620 kc 1620 kc C1 -D for MAXIMUM 3 Secondary, 5.5 ohms
Tune to a5C/LIATOR CO/L
3. ditto 1500 kc oscillator CI -B for MAXIMUM BOTTOM V/EA/
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
SCHEMATIC NOTES
PHILCO TRANSISTOR RADIO CAUTION-Due to 2nd I -F transistor variations, the
value of resistor R8 must be selected, within limits for
MODEL T-45 - CODE 124 optimum performance. When transistor T -I504 (or
T-1542) is defective and must be replaced, resistor R8
PANEL (CHASSIS) REMOVAL must also be changed unless the original provides the
1. Remove the following-Tuning and volume control proper resistor operating characteristics. Failure to select
knobs, cabinet back, batteries, two tri-mount fasteners the proper resistor can shorten the life of the transistor
at speaker end of panel, battery contact and retaining or seriously affect receiver operation.
board, and the private listening jack from its cabinet The value of R8 is selected to allow the 2nd I -F tran-
mounting position. sistor collector to draw 2 milliamps and will be between
18,000 to 33,000 ohms. This is checked by measuring
2. Open the ground connection from the on -off switch the voltage across RIO, the 560 -ohm collector return
to the speaker. resistor. This voltage should be 1.12 volts, with a 10%
3. Remove the panel from the cabinet by first lifting up tolerance (±.12 volt).
on the speaker end of the panel. All resistors are I/2 watt, 10%, carbon, except R8
which is 5%. Coil resistances read with coil in circuit.
BATTERY VOLTAGE AND TYPE -6.0 volts Voice coil impedance = 14 ohms. Voltages measured to
from 4 penlight cells, type "AA", P-15, or mercury ground with a 20,000 ohms/volt meter under no signal
type "AA", P-9. conditions.
T-1542
T-1504 1-1503
2ND I F 1ST IF.
- R3
421k
svcaP
i T-1502
.118 P2 ; I CONV.
1P46164,
e1 'FFIV
4 - -
t13% r-
r4.7
CI r -R6
ir737!/is
er.,sem..astil -eff
TO
\
CIA
sfi RI2
11C12ild Mrs)
rA - I
- C8 '1(44 ?7115j-V ,
12 Rt6
T-1505
.6 AUD. OUTPUT Composite Bottom View
RS
4700
0Ip
CONVERTER
1-1502 TI
N
1St IF
T-1503
r-r2 - I, 4
470
Tr2 7,1 , 40F
R6
ev
nTS t3
43Ilaimc.7:425T
Ki
s
lei'
Lt
0082
cT
R3
200
, RT
2K ro
.0013
T2
A "
R14
.so
6V
KC. CII
10061/ 4. 6v
C12 16
.01 F. TOO It
SW1
Schematic Diagram of Model T-45-Code 124
104
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
PHILCO TRANSISTOR RADIO MODEL T-45 - CODE 126
SCHEMATIC NOTES
Due to 2nd IF transistor variations the values of resistors R6
and R7 must be selected, within limits, for optimum per-
woe as" formance.
When transistor R186 is defective, kit number 324-8003 must
4.44
be ordered. This kit contains a R186 transistor and two resistors
(R6 and R7) properly matched. All three components must
W...
=EMI
....me be replaced.
0... ...................... ....". 7::: ....'.1110........
...II
....: = =".."........,
The stage may be checked as follows:
.....".......
..... ....' = 4.4.. .....' .... .................
./EI /MEP .40 4E1 The value of R6 is selected to allow the 2nd IF transistor
collector to draw 2 milliamps. This is checked by measuring the
" ."7 ""
voltage across R11, the 560 ohm collector return resistor. This
voltage should be 1.12 volts, with a tolerance of approximately
- -±.12 volts. The value of R6 falls within the limits of 27K to
444 - -4 41.
390K.
MODEL T-45 -- CODE 126 All resistors are 1/2 watt, 10%, carbon.
SERVICE NOTES Coil resistances read with coil in circuit.
Voice coil impendance = 14 ohms.
When signal tracing, inject signal at transistor collector and Voltages measured to ground with a 20,000 ohms/volt meter
limit input to keep signal across speaker below 0.275 volts. under no signal condition.
Normally, the transistors should be the last item suspected.
1000ft TO 5000 ft
(SEE NOTES/ 1--N
137 IF 2 NO IF R7
CONVERTER
2N 252 214254 11
lo
a
J1 FRONT NEW
1/33141 I rlr p4.7 741. DE7
OV
4.75 a (SEE NOTESI 131604 R5
C6 0.iv 100
al .3110
VOLt.
,7e C CON
C7
CIA _1_4 4700
.02
L
1
C2
L _/ 3V
RIO
CCI-LECTOR
SASE
2 2K 5
27K 12 3 EMITTER
R11
R2 560
4.7K NOTEt 390K
6VII TRANSISTOR PIN ARRANSEMENT
RI
56
ALANO PAW
.0015 2N1115
C15
.01 C16* TAWF
41V
I II IIt
SEC ST
11111111 121111111111 I illPRI.
St
4.757 ]C14
`00
4.76
Al2
4.6V
.6214`..
JI
Iva R16 22 10
TO CONVERTER RASE
PRI TO SEC. 220 FiL6
LOW 310E TO
TO ANT. SECTION JUNCTION OF R13
Of SANS. C2.R1. S R2 1 W.
(Sitv
Schematic Diagram of Model T-45 - Code 126
1ST IF 11 TI
C2 C6 RI R5 I R6 C4 TC2 ICI C3
IF. '455 KC -
I 3 4 2 4 3 r CONY.
R2
E2
TC3 ,t 4... I 2.1 3
3 2
2ND
LF L.__ Cl2
4
C14 R7
C7 Z3
TO SPEAKER 0 X-TAL DET. TC4 -
TERMINALS 1 4 1 :
R3
1-
C8
R8
\ C9
R11
CI3 CIA
../
\ ....
i ..,
."<'t Cl
C10
----- I
.."
..1"'
2
,.....,_s-.3 --ly >", -------------- j -
T2
I
-- .,'
'
2
C16 AUDIO
AMP
1-
R9 R12
C15
1 C11 I
RI4
R15 R13 R10
Composite View - Bottom of Panel
105
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
SCHEMATIC NOTES
PHILCO TRANSISTOR - CLOCK RADIO CAUTION-Due to 2nd I -F transistor variations, the
value of resistor R8 must be selected, within limits for
MODEL TC-47 optimum performance. When transistor T-1504 (or
T-1542) is defective and must be replaced, resistor
PANEL (CHASSIS) REMOVAL R8 must also be changed unless the original provides
1. Remove the following-Tuning and volume control knobs, the proper resistor operating characteristics.
batteries, two tri-mount fasteners at speaker end of panel,
battery contact and retaining board. The value of R8 is selected to allow the 2nd I -F
2. Open the positive battery terminal lead from Ll tie lug on transistor collector to draw 2 milliamps and will be
panel. Open the speaker connections. between 18,000 to 33,000 ohms. This is checked by
3. Remove the panel from the cabinet by first lifting up on the
measuring the voltage across RIO, the 560 -ohm collector
speaker end of the panel. return resistor. This voltage should be 1.12 volts,
with a 10% tolerance (± .12 volt).
SERVICE NOTES
All resistors are IA watt, 10%, carbon, except R8
When signal tracing, inject signal at transistor col- which is 5%. Coil resistances read with coil in circuit.
lector and limit input to keep signal across speaker below Voice coil impedance = 14 ohms. Voltages measured
0.275 volts. to ground with a 20,000 ohms/volt meter under no
T-1542 signal conditions.
T-1504 1-1503
2ND I.F 1ST 1F.
R3
rr TI T-1502
CONV
)0V.t4.34
Lirrn :Amami.:
412.,
C11
*-9 -- ----- ,.
--.............,
rf-<7 ir , 1 ,
E 3-4. !i
,...3.-. ,...-..:-...2...7. II--,,-.
rs _.,0 jil I C i
-..... XTAL C !ii :
--...-- -7...sv ' ..
--r- ,...)
1 :
TO J1-4 RI Y.( .......: \ 1 C 4YR10
\ 0 fa/
-;',..' 17 MA
:
I,,,
--k
.
'.
... .'S:--::< I
...,,./. ..
Cs.,, SRS
CIA
ri R12 Nv-----' ' ''N') 1
vt.
..........;
1,1c12/
- ,
....,
ii;RaL -..
---i_c_4___,_
c)
Ri6
11,13YRI5 ---.._,_
--....---' : c* r ..,
T -I505
AUD. OUTPUT P
TO .c? Composite Bottom View
55 ,I#I GO
0700
CONS
3- 1502 TI
r-- - .P ,
E2 2ND IF -SEE NOTES.
1-1504
1-1542
.iv -
-
l'711k&T
RII
4S5 KC.
al I. " ©
100 VOL CONTR
CIA
/ ce
.ocps -
CIS
4..y
.1.11v " Fr2 .0015
CS
Re .c.os .00
IOW T2
RI TO
C
.0047 53K RIO 90LIC4.4
ISR
-e.Vs-1
NES
560 T-1503
41)0 05T tfAtcl,;_j
SOTS
,5230 54 117 R9 3
680 ;2200 22 10 RFD' J1
Cl2 3
mss Iour
"i, R14 LSI
,005 ftl
C II
OMATICL .0.1
TERMINAL 00000
t * i
SWI 5 ON CLOCK TT 41-2073-L
RIR
- CLOCK HOUSING
CLOCK MOTOR
Schematic Diagram of Model TC-47
106
AUDIO OUTPUT
IF - 455KC (MATCHED PAIR)
ZI 22 R12 T1624 *
1800
CONVERTER IF AMP. 2ND DET
11504 11460 T1618 * T2
1
RIO
V 21 0V 5 1.5 V 33 *
LAI
1
, I 4
T 4.95
I I 111a
Cl M A'0
C2
In
01 H
'11
C8 25
+5.2V
6V
Schematic Diagram of Philco Transistor Portable Model T-50 4 TYPE P640
MERCURY CELLS.
2 1.3 V/CELL. trl
-a oo tx1
8_ *
-10 N Pm 23 4
tJ
u- ()
1 1
11 II
JI
--Le-1_72r PHONE JACK
III Oir.vYif EC. ST.
LPR1. FIN. co
(FRONT VIEW)
SEC. FIN.
O
PRI. ST.
r LAI, ANTENNA TERMINALS
NOTES.
ALL RESISTORS I/2W, 10%, CARBON.
VOLTAGES MEASURED TO GROUND WITH
A 20,000 II/VOLT METER UNDER
e NO SIGNAL CONDITION.
COIL RESISTANCES READ WITH COIL
tIl
N IN CIRCUIT.
* FIRST PRODUCTION -
1;3 AUDIO OUT. WAS T1009 RED DOT.
I
2ND DET WAS TI460 RED DOT.
"N7 I RUN 50- RII, VOL CONT., WAS 100K,
PART # 33-5583-8.
RUN 51- RII CHANGED TO 30K,
PART H 33-5583-8-10.
RUN 52-RII, 30K, 33-5583-10,
4.1
0 PANEL LEAD CONNECTIONS
Black lead from negative battery contact to switch lug #7.
...... .... Ck-At Bare wire from switch lug #6 to ground tab of volume Pz,
D + control and to frame of gang.
0 cr.?! Red lead from positive battery contact to switch lug#4.
/
147);;;IM .... N Red lead from switch lug #5 to L2.
Yellow lead from voltage supply center -tap to J1, lug #1.
H
)*.)
Orange lead from 11, lug #1, to speaker.
e4, 4 Orange lead from JI, lug #3, to speaker. 0
Brown lead from Jl, lug #2 to panel L3.
cn
<
0M
0
z -n
0 cr)
0_,
IF455KG 23
I Si IF MIPL 2101E911k 210 020 KO: Nt
r
(11233) 11232 TI033 RIO
1ST AUDIO OUTPUT (MATCHED PAIR)
IS
CO C1 til
01 NF
.011 MF
"Or
R9
2100
131
114 N s
.1000 0.1 R000 2200 0200
Ali 022
41 0.1100
1.9V 5%
Slirt 2011f
tit
75v13
TN.
--1-
Schematic Diagram of Model T-78 BATTERY CURRENT DRAIN - ON -OFF
SWITCH
C19 13/AA AVERAGE USHER
ZERO SIGNAL CONOMONS PARTOrRi5
10010
T)033 19232 T-1233 TOP-PRI. TO LOOP TRANS TOR
1ST AUDIO 77T 2ND IF 1ST I.F CODE
E3 E2 BOT- SEC LEAD 2 ST AUDIO OUTPUT i"*Av
9 C4 126 T 1000 T2U,
(-312
RI7
CI0 + 6 "k
TI
TO BATT.
POSITIVE R5 Tr
R7
T 1-1033
CONY.
R4
R3
R
1122
0
TO BATT. AUDIO * TO LOOP * TO LOOP TO LOOP ANT OSC.
NEGATIVE OUTPUT LEAD 4 LEAD 3 LEAD 1 CIA CIB
Top View, PW Panel
* LOOP LEADS 3 & 4-DRESS BETWEEN EDGE OF PRINTED PANEL AND MASONITE
FRONT PLATE. CONNECT TO TIE LUGS INDICATED ON FOIL SIDE OF PANEL.
SERVICE NOTES
44' A
The dress (position) of condenser C8 may be
helpful in reducing harmonic whistle when en- When signal tracing, inject signal at transistor OD
countered. C8 may be bent over toward R14 and collector and limit input to keep signal across
the detector transistor. In sets where C8 is in speaker below 0.4 volts.
this bent position, do not disturb. Normally, the transistors should be the last item
suspected.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
PHILCO AM/FM TUNER-MODEL RT-300 (Continued on page 110, over)
This tuner is equipped with a front panel and mounting 3. Connect an oscilloscope, through a 100,000 ohm isolat-
board and is intended for quick installation in the space pro- ing resistor, to junction of R8 and C20. Connect the
vided in the "H" line Philco Hi -Fidelity Phonographs. oscilloscope ground lead to the chassis.
4. Connect the signal generator to the cathode of the FM,
AM ALIGNMENT PROCEDURE RF amplifier, pin 8 of Sl. Connect the ground lead to
the chassis.
The AM alignment should be completed before the FM 5. Inject a 10.7 MC marker signal and a 10.7 MC sweep
alignment is performed. Before beginning the alignment, signal, approximately 150 KC total deviation (do not
allow the receiver and test equipment to warm up for fifteen over sweep). Adjust cores in top and bottom of T3,
T2 and T1 for maximum -amplitude, symmetrical curve
minutes. with the 10.7 MC marker at the top of the curve.
Dial Pointer-With the gang fully closed, adjust the pointer Adjust input signal to maintain output, as indicated
to coincide with the first small index mark to the left of on scope, below 2 volts peak during alignment. Repeat
the "54' (540 kc) on the scale. this step until no further gain is obtained.
Tuner Controls-Set the function switch to the AM position 6. Change scope connections to the output connector J1.
and the AM tuning control as indicated. Inject a 10.7 MC, 30% AM modulated signal to the
grid of the 6AU6, pin 1 of S4. Adjust top of T4 for
Output Indicator-Connect a scope to output jack, J1. minimum indication between peaks. Inject 10.7 MC
Signal Generator-Use an AM r -f signal generator with 30% sweep signal, approximately 150 KC total deviation,
modulation. to pin 1 of S4 and adjust bottom of T4 for maximum -
amplitude, symmetrical output. Adjust input signal to
1. Connect generator, through a .05 Afd condenser, to the maintain output, as indicated on scope, below 5 volts
signal grid, pin 7 of the AM converter, S6 (6BE6). Con- peak during alignment. (See NOTE below.)
nect the ground lead to chassis. 7. Open tuning capacitor. Insert a 6 -mil, non-metallic
2. Set generator to 455 kc. Fully open tuning gang. Ad-
shim between stator and rotor of the FM gang and
just, in order given, top of T7, bottom of T6, bottom of then close the capacitor against the shim. Inject 108.5
T7, and top of T6 for maximum output. Repeat until MC sweep signal (approx. 150 KC total deviation),
no further gain is indicated. through an antenna matching network, to the receiver
antenna terminals. Adjust VC3 for maximum output.
3. Connect generator to radiating loop. Set generator to 8. Close (mesh) the tuning capacitor. Inject 87.75 MC
Set receiver to 1600 kc as indicated by pointer.
1600 kc. sweep signal (approx. 150 KC total deviation) through
Adjust VC6A (osc. trimmer) for maximum output. an antenna matching network, to the receiver antenna
4. Set generator to 1400 kc. Tune receiver to signal and terminals, and adjust X3 for maximum output (see
adjust VC5A (antenna trimmer) for maximum output. NOTE below).
9. Set pointer to 91 MC and inject a 91 MC sweep signal.
FM ALIGNMENT PROCEDURE Adjust X2 for maximum output. (See NOTE below).
The AM alignment should be completed before the FM 10. VC4 is the oscillator bridge capacitor used to minimize
alignment is performed. oscillator radiation. This is a factory adjustment and
should not require further adjustment in the field.
1. With the gang fully closed, adjust the pointer to
coincide with the first small index mark to the left of NOTE: The signal input must be as low as possible in order to
the "88" (88 mc) on the scale. obtain a sharp indication. In some cases It may be
Set the function switch to the FM position and the FM necessary to set the signal generator to the first sub -
2.
harmonic.
tuning control as indicated.
FM LIMITER 3RD FM IF IF AMP
DISCRIMINATOR 6AU6 6 BA6 2ND FM IF
Ti
\T3 1ST FM IF
2 3
FM OSC.
a..204/ 0;16 C.-
C22
T4 FM OSC.
BRIDGE
FM OSC.
L31 ?.23
R13 FM ANT.
C24
FM RF
RECT FM DISC. -AM DET. 2ND AM IF -< VC6A VCSA AM CONY. 1ST AM IF
6X4 6E17 AM OSC. AM RF 6BE6
109 Top View-Showing Alignment Points,
Tube Locations, Tie Lugs and Components
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
PHILCO MODEL RT-300 SI los MK
52
10 .U.Uf
TI C14
IgATi 1.14
(Continued) 7.
X2
1121 95V*
150 Hu,
NC9 90V
12
T
uU f J
4,14,
-I.2V* 1
74,
-0.6V 95V *
4X3 R2
N.
R4 5% kW 15(9 .01
C6 VC3 R5 C15
4.7= 105_,
it/
/
1.1Alf K
N750
C8
5
/ .00514f 10% STANDARD
WIRING
2
C13
f
L 13
//
S3 3 S4
6BA6 95V th. r 11_11 al. 55V
T4
C30 I T21
T2 2
T2 95V 2220 IA3 4.
fyit. I414 f
1000
.5V
L4
Lan I DI J
2
RI2
R7 100K
.01 66 .0 C21
$17,9.
51f .00.6919
C17
2220
R6
Uf C29 / fIZOI
nI5
.0047y,
1/f
L12
1
Av Lamiv6
3
FSWLzIdelki XL9 11 .,LI JI
C2 AUDIO
A/ AM "4,
.°d; C24 RI3 OUTPUT
.00169 2.20 LB
Uf gr L3
fC25
100 LI U
T6 KC31 L5)4.4141-$411 'C'17;1
LI I SW1
47.
RI6
71ILL;
16 3
3 5 3le
5
1001.1
C32
95VI 5 314 4 4
12_ 1_1 AT7 6 A4 secs Ga GALA. 66P 6X4
'Of I
125A
VC5A, 2
S2 SE S3 S4 S5 57
VC5 2
3
10yyr
IA
\ \/ ..- . OV
9.
T.
ST
_EAL_
SW1
REAR VIEW. IN AM
\ F211
C26
_Oyu!,
TEL
600 fl TOT. 6
7 145V
RI9
1200 1004
POSITION ICCWI.
T5 4 GAN
El -2
\I LIE
7nVC6
VC6A
14
15
f
RI7
2.2 h/EG
TO AMP.
CHASSIS
L .
300V, AC,CT.
AC
L7
L6
C33'5)11W riS" BLX CORD "B"
NOTES
VOLTAGES MEASURED WITH A VTVM AT 1174,
60'1, LINE UNDER NO SIGNAL CONDITION S
ENO 2
19/32
* INDICATES VOLTAGES READ IN "FM" . CORD Au
INDICATES A RESISTANCE OF LESS THAN In.
COIL RESISTANCES READ WITH COIL IN CIRCUIT. 10 7/32"
SWITCH POSITIONS: CCW -AM; CW-FM.
SPRING
POINTERS 28-9739-11 28-9490 /2140 I
NOTE. ILLUSTRATED WITH BOTH GANGS CLOSED. 3 1/2 TURNS
110 Drive Cord Installation Details
SI 52
T 12
12AT7 6AU6 SW1
10 u 1.1 IOU yyf 2 FRONT
2
x2 95V *
)L19
2 C9 800* C14 3 SWITCH
890 C3 C5 Clli 1,"'2n.7 POSITIONS
61 AM ONLY
6 ..50 our 3 uf
ISO UMf 4 2.FM ONLY
660 2 13 3. STEREO -BOTH
VC I ou AM 5 FM
MiCAr I 0.7MC
4 0.7 1
K C7 95v* 7 6
C4 VC3 "---I8o BOTH LAYOUTS VIEWED FROM KNOB END
5./ * C6 R5 C15 WITH SWITCH IN COUNTERCLOCKWISE
x POSITION (AM).
4.7 m
"'"F ;
5 R our 2.5
CI K U 4f-TT-7c-
FM ANT. 7.5 '7" -.)4 ..- VC4
11Of
/ 871.i-7
____ STANDARD WIRING
ISO
.00IMF SECTION
C2 .005 of R3
K
.ol of
13
NOTES-
VOLTAGES MEASURED WITH NO
-3E-L20 SIGNAL a A LINE OF 117 V, 60
6A06 50v* PLAIN VOLTAGES TAKEN IN "AM"
r- L13 THOSE WITH ASTARISK TAKEN IN "FM"
5 93V 54 "24 MUTIPLE X
SWIE I I 31_ 7160%j: OUTPUT B+ VOLTAGES IN "STEREO" WILL
9 2 - I. JI BE APPROX. mipwAi BETWEEN THOSE
6 STEREO II C201 R8 SHOWN FOR 'AM' B 'FM'.
.ik, .._,...1_4,3_11. 100K I 6.11,
3i --- RI2 INDICATES A RESISTANCE OF LESS
8,
8t16:M t- Or.-.4AC UMfT
6ReI
0.5V- L4 -+ITuaLE.8
6
I
RII
LI.RI202,,
1000 THAN O.10..
.9V 10.7mq I
t 0.60
56
of °.501001 R9
220 C17
Uf 78
R6
Llex
68A6 109V '455KC
58 5
L4 1711 2-I
2 C30
6 C24 6V LAMPS
io0iluf .01
0.55 110V K .001
C 221.4F SW, 411
or 52
rif
4819 17.2K
0
-" 4IP
68 0 12
RI7 1631
L14 100uuf
Fm 7 \ FCI
.0 4 4 3 3 3
2,20,
2 /SWIRL C16
T7 IO
9STEREO 01
AM 12
0C
.IO
9 3 4 4
109V
n- COOL )-F03022
S6
1090 3
- 12 VC6
S7
nn
'455KC
.1.1f
AUDIO OUTPUTS
ut
6BA6 BO S10
5II IVC6,2I J2 J3 R 95V*
1555* 620
COMMON STEREO L12 -604
160 V 110V
2 I to 6
6 10
LAI 3 OV 7 TO -8V 220K
PT ,55v AC L2 6
-vc, RIG 125V* SURF - 80 MF
R23 TO AMP.
11 n C26, of Li7 Tzufl 59 45V CHASSIS
ElA EIB
44 VCS/ FM I C29 6DA5 LC
xj:ipf 0.5V 9 1550*
/ AM 1600
R22 -0.6V .004 6.3V BE
SW1R 2 ,150
ri3144
1 j4
/VC c2 IMEG C36 AC
7.58pur R25
68K L 23
STANDARD WIRING -;C437T
f I 2 5.60*
SECTION R20 R 40 OV
L6m--1 2.2 MEG L15 4 7M
516
VRI Schematic. Diagram of RT-400
247: 470K Ft-
C32 R21
IIi'liC401 . 00114F
ST RE j6
SWIF
RUN CHANGE INFORMATION
Run 50 First Production.
Run 51 To prevent AM oscillation. The AM i-f amplifier cathode resis-
tor, R17, was changed in value from 68 ohms to 110 ohms, part
ADJUSTMENT OF TUNING INDICATOR (More material on
number 66-1108340. Remove S5. the 6BJ7 discriminator tube, or ground the cathode, pin 1
Run 52 To facilitate production. The FM tuning condenser was changed of the 6BJ7. pages 112 and 113)
to 31-2789-1. This is a three section gang; the center section is Adjust indicator balance pot, V121, for parallel beams on the 6DA5.
grounded. For replacement purposes use the gang listed in the
parts list, part number 31-2789-3. Replace S5 (or remove ground).
IDENTIFICATION OF "PERMA-CIRCUIT" TIE LUGS LI1 Black filament lead from power. transformer, brown
LI Filament lead to pin 4 of 6DA5 (below panel) and pilot lamp lead and brown lead to pin 4 of 56 (top
pilot lamp lead (top of panel). of panel).
L2 PHILCO L12 Red lead to pin 9 of S9.
Yellow lead from power transformer to pin 6 of
6X4 (top of panel). L13 Lead to JI, the multiplix output jack.
L3 Lead from R13 to lug 12 of SW1 (below panel). STEREO AM/FM TUNER L14 Red lead to lug 8 of SW1.
L4 Yellow lead from power transformer to pin 1 of MODEL RT-400 L15 R40 and C40 to SW1-10.
6X4 (top of panel). L16 Bare wire to lugs 2 and 4 of SW1.
L5 Not used. LI7 Lead to lug 3 of SW1.
L6 Lead to antenna terminal panel lug 4 and C32 to LI8 Red lead to lug 8 of SWI.
ground (top of panel). L19 Blue lead from plate, pin 5 of S2.
L7 VC6A
Green lead to oscillator section of gang (top of RF L20 Red B+ lead to screen, pin 6 of S2.
panel). L21 Filament lead to pin 4 of S2.
L8 Black lead to AM RF sub -chassis (tpp of panel). 6BA6
AM RF L22 Bare ground strap to chassis lance.
AMP.
L9 Lead to pin 6 of S6 (top of panel) and lead to lug L23 B+ end of resistor R25.
8 of SW1 (below chassis). VC 7
AM OSC.
LIO Green lead from S7, pin 7, to T5, lug 6 (top of
VCSA 6BJ7
panel). AM ANT. AM a 6X4
FM DET. RECTIFIER
XI
FM ANT.
COIL
X2 U
FM RF
@COIL 44L
68E6
AM CONY. S7
I2AT7
FM RF CI SI o
CONY. 3 z
X3 T7
FM OSC. COIL 1st SS
IF
VC4
VC3 6BA6
FM OSC. AM IF AMP
TRIMMER
TB
2ND AM IF
Ti
1st FM IF
O
6AU6
Is,' FM IF
AMP.
T2 6AU6 13 6AU6 T4
2ND FM IF 2ND FM IF 3RD FM IF FM LIMITER FM DISCR.
Top View-Showing Alignment Points, Tube Locations, Tie Lugs and Components
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
PHILCO Stereo AM/FM Tuner, Model RT-400, Continued
SPECIFICATIONS FM ALIGNMENT PROCEDURE
This tuner is equipped with a front panel and mounting board and is The AM alignment should be completed before the FM alignment is
intended for quick installation in the space provided in the -H- line performed.
Philco Hi -Fidelity Phonographs. 1. With the gang fully closed, adjust the pointer to coincide with the
CIRCUIT-Nine-tube superheterodyne plus rectifier, Function switch first small index mark to the left of the "88- (88mc) on the scale.
allows reception on AM only, FM only, or AM/FM stereo. 2. Set the function switch to the FM position and the FM tuning con-
FREQUENCY RANGES-AM broadcast 540 KC to 1620 KC trol as indicated.
FM broadcast 88 MC to 108 MC 3. Connect an oscilloscope, through a 100,000 -ohm isolating resistor,
TUNING DRIVE RATIO -10:1 on both AM and FM to junction of R8 and C20. Connect the oscilloscope ground lead to
the chassis.
OPERATING VOLTAGE -105 to 120 volts, 60 cycle AC only.
4. Connect the signal generator to the cathode of the FM, RF ampli-
POWER CONSUMPTION -45 watts fier, pin 8 of SI. Connect the ground lead to the chassis.
INTERMEDIATE FREQUENCIES-AM-455 KC 5. Inject a 10.7 MC marker signal and a 10.7 MC sweep signal. ap-
FM -10.7 MC proximately 150 KC total deviation (do not over sweep). Adjust
cores in top and bottom of T3. T2 and TI for maximum -amplitude,
symmetrical curve with the 10.7 MC marker at the top of the curve.
AM ALIGNMENT PROCEDURE Adjust input signal to maintain output, as indicated on scope, below
The AM alignment should be completed before the FM alignment is 2 volts peak during alignment. Repeat this step until no further
performed. Before beginning the alignment, allow the receiver and test gain is obtained.
equipment to warm up for fifteen minutes. 6. Change scope connections to the output connector J2. Inject a 10.7
MC, 30% AM modulated signal to the grid of the 6A.U6, pin I of
Dial Pointer-With the gang fully closed, adjust the pointer to coincide S4. Adjust top of T4 for minimum indication between peaks. Inject
with the first small index mark to the left of the "54" (540 kc) on 10.7 MC sweep signal, approximately 150 KC total deviation, to pin
the scale. 1 of S4 and adjust bottom of T4 for maximum -amplitude, sym-
Tuner Controls-Set the function switch to the AM position and the AM metrical output. Adjust input signal to maintain output, as indicated
tuning control as indicated. on scope, below 5 volts peak during alignment. (See NOTE below.)
Output Indicator-Connect a scope to output jack, J2. 7. Open tuning capacitor. Insert a 6 -mil, non-metallic shim between
Signal Generator-Use an AM r -f signal generator with 30% modulation. stator and rotor of the FM gang and then close the capacitor against
the shim. Inject 108.5 MC sweep signal (approx. 150 KC total devia-
I. Connect generator, through a .05 pfd condenser, to the signal grid, tion), through an antenna matching network, to the receiver antenna
pin 7 of the AM converter, S7 (6BE6). Connect the ground lead to terminals. Adjust VC3 for maximum output.
chassis.
8. Close (mesh) the tuning capacitor. Inject 87.75 MC sweep signal
2. Set generator to 455 kc. Fully open tuning gang. Adjust, in order (approx. 150 KC total deviation) through an antenna matching net-
given, top of T8, bottom of T7, bottom of T8, and top of T7 for work, to the receiver antenna terminals, and adjust X3 for maximum
maximum output. Repeat until no further gain is indicated. output (see NOTE below).
3. Connect generator to radiating loop. Set generator to 1600 kc. Set 9. Set pointer to 91 MC and inject a 91 MC sweep signal. Adjust X2
receiver to 1600 kc as indicated by pointer. Adjust VC7A (osc. trim- for maximum output. (See NOTE below.)
mer) for maximum output. 10. VC4 is the oscillator bridge capacitor used to minimize oscillator
4. Set generator to 1400 kc. Tune receiver to signal and adjust VC5A radiation. This is a factory adjustment and should not require fur-
(antenna trimmer) and VC6A (c -f trimmer) for maximum output. ther adjustment in the field.
5. Set generator to 580 kc and tune'receiver to signal; adjust core of NOTE: The signal input must be as low as possible in order to
r -f transformer (T5) for maximum output. obtain a sharp indication. In some cases it may be neces-
6. Repeat steps 4 and 5 until no further gain is indicated. sary to set the signal generator to the first sub -harmonic.
CORD "A" CORD"B" CORD °C'
END 2
k-52 19:-91
52
14- 50 78
POINTERS 28-9739-10 SPRINGS 28-9490
3 1/2. TURNS CORD "A- CORD C" 31/2 TURNS
Drive Cord Installation Details
113
RF AMPLIFIER CONVERTER IF AMPLIFIER
1213L6 e6 I2AD6 DET. AUDi,AAP. DRIVER
18 I2CX6
AUDIO OUTPUT
I( BROAD BANDPASS - NARROW BANDRASS SUB -CHASSIS
2I 5 5 AP 3
r5IK I F 262.5 KC r CIS -a.
...A, 1 -p Ti
v'm 121
001
n1 662
T R7
2 12
S] 6 120 1;0 4
C5
II) ,
1
T±711 42
j L ; T2 rY,x
2
220K
IE o
2
2
18?
2 20
41?
-
22MEG E
I T
1.2 e- ) CO AN3
100 100
$ 6.8 IC 74
VCI 220,3
MEG 6220 CI6
M Tae_vIr'EG
2 7. K 10 MEG NAL4
.F NO
_LgLn (Cl2 FRONT 5511:-1-
L = 22
.L
.0035
SPEAKER
_J SHIA VRI 03,
.005 Pw
NO 334 I EG
115 SOCKET SHOWS
0 1504 TAP AT iLmEG
330 1( SPEAKEJ2 BOTH SPEAKERS
0 CONNECTED.
4.07 SOCKET
SWIG
gVENTzT, SE NS
5'0031, IT 1 ViTY
arFa; 4R7:,0 MAGNETIC `05W3 R8 RELAY e
J_ CLUTCH c1 3
NC .5
le) TONE ICJ MEG INSULATOR
SWITCH = T.002 ED LICSEOWL 1AL Y
TRIGGER2 A
REAR SPEAKER
TRIGGER.
DETECTOR .01
FADER CONTROL 0
CIS vRo
RI3
RII 4.7 11.5
12131.6 12CX6 12014 01 MEG * oPCATEs COPP*
NI. O'IdTtoPm
4 31 0 4 56
4I 41 51 5
7R,o, (4)SW
FOOT SWITCH
12ADG 12.18 5W3 CTI
L6 REVERSE CD
SWITCH
SW2 SWO 4=.
JO
C23 LT 1
X mew 5 4
FP
56 , COUNTRY
IC20 B 50F TES COMPOW.T5 OF
...,..v.,25n-o-,__0.1., RII .01 TOWN ARTWORK M2.
A
200 aoo++ '18411,,,i,TELLom
T
SI " COLLECTOR
2u1
Cµ CM SWIG
FT _AA NO BASE SRI
O
+31
DIAL
LIGHT
II I
EMITTER
TRANSISTOR SYMBOL
TO FAME
khematic Diagram, M-5944 NOTES x-.4.113,152 MORINLLY OPER
-C NORMALLY CLOSED
ALL RESISTOR VALUES IN OHMS *205. 112W
ALL CAPACITOR VALUES OF 10 AND BELOW ARE IN LLF t 20%
ALL CAPACITOR VALUES OF 1.0 AND ABOVE ARE IN 1111F 20%
(UNLESS OTHERWISE INDICATED)
F FREOUENCY 262.5 KC
TUNING RANGE SOONG-P.6170.0
K-1000 OHMS
NC -NORMALLY CLOSED RELAY CONTACT
NO -NORMALLY OPEN RELAY CONTACT
VOLTAGE MEASUREMENTS
1 -VOLTAGES IN PARENTHESIS MEASURED WITH VTVIA.9 IMEG ISOLATION.
2 -ALL OTHER VOLTAGES MEASURED WITH 2O,000.15/VOLTMETER
3 -ALL VOLTAGES MEASURED WITH RESPECT TO CHASMS
4 -ALL VOLTAGES MEASURED WITH 4.1e4V INPOT WITH NEGATIVE GROUND
RESISTANCE MEASUREMENTS
I -BATTERY LEAD REMOVED FROM SET
2 -NEGATIVE OHMMETER LEAD ON CHASSIS GROUND
TONN_ 3 -TONE SWITCH AND VOLUME CONTROL IN FULL CLOCKWISE POSITION
A- VALUES SHOULD NOT VARY MORE THAN 20%
IP , COUNTRY TEST CONDITIONS
SOCKETS AT TOP OF PAGE ARE BOTTOM VIEWS. VOLTAGES TO GROUND ARE
SHOWN ABOVE LINES, AND RESISTANCES TO GROUND BELOW LINES
DUMMY ANTENNA
501.111F SERIES AND 30U1LF SHUNT AT ANTENNA SOCKET, 0.1µF
SERIES TO CONTROL GRIDS FOR GAIN MEASUREMENTS
TRANSISTOR
DO NOT OPERATE SET WITH SPEAKER DISCONNECTED
WHEN SOLDERING DISCONNECT FROM POWER SOURCE
USE BATTERY OPERATED INSTRUMENT WHEN MAKING MEASUREMENTS
ZI
2ND DET. 7 ,005uf T2
1011V AUDIO OUT
Diagram - Model G-747 CONY AUDIO AMP x -11*
3 55V 110V
12 AU 6 12 AV6 50 E H5 C6
3411.
3411
ac
in II :470K
C3
6 -2V - 4V a 6
LAI 47 uLIF -2.3V 2
115 105V
" v 0v
CI (CIA R2 C4
22 7 1220
2.2M OM 4.3V
taut OV
-3r 6 t.11.1f
5
-e-- -.005
T 30 2 mai §4170K
rt 220
EST. ANT 5 2 I F 455 KC uUF
RI Cl TI R3 C5
C2 220
.047 4706 VOL CONT
LI f
ALL PARTS MARKED
ARE PART OF NI. R4 ilev
35w4 R5
RECT. 2204.1 ve 100011
125V
'105V
TO REMOVE PERMA-CIRCUIT ASSY.
t 30 f 2014
C7A C7C
1. Remove the four drive screws from back. Be careful of the
35w4 SoEHS 12AU6 I 2 Aye speaker leads, the speaker is mounted on the back.
R6
4 4 3 q7 -O' 3/\4 2. Unsolder the two antenna leads.
3 304
WI 2w 3. Remove the kno5s.
Ce
.047,4f 4. Remove the rear mounting bracket by removing screw.
5. The Perma-Circuit is now free to slide out.
CLOCK OFF
MOTOR AUTO SWITCH OPERATED
CLOCK
Ti C113 CIA SPRING CLIP 50 EH 5 35 W4
OSC. TRIM. ANT ANT CONTACTS AUDIO OUTPUT RECTIFIER
OSC. TRANS.
_
/ Tr. C7
TT TTTTT
8 7 6 5 4 3 2 I
NI BACK VIEW, SHOWING INTERNAL
CONNECTIONS.
-4nirsA
i3
------- ---- /1\
12AU6 r
CONY. Cek,)
10 -11"ifS'
NEUTRALIZING R3 SCnOIATIC DIA4111
-GIMIWCWCAP
N TT
-
L NOTES
I.F TRANS
SEC- TOP
All components marked with an asterisk are con-
PR I - BOT tained in one unit, Ni.
\- td All resistors are 1/2 watt, 10%, carbon type, unless
8+ TO TO OUT. TO CLOCK TO CLOCK
El- FROM CLOCK SW. 12 AV6 otherwise noted.
OUT TRANS. TRANS MOTOR MOTOR
2ND DET - FROM Voltages read with a 20,000 ohms/volt meter, from
I ST AUDIO
PLATE point shown to B-, under no signal condition.
Perma-Circuit Panel, Under Side, Showing Component Layout
TUNING CONDENSER S4
S3
AUDIO
DET -1ST AUDIO
/- 84V
- Cl
1
Z2 AND AVC
OUTPUT
5005
/ Si TC2 TC3 r f64 TF5 -1 12 Ave
S2 84V 50V 960
CON V
I
.2 I. F. 4 .005)41* - T2
/ AWL ,1 7
Agit_ A a
17 e
TOK II
6 85V
'Yn11n1 IFnit 70K.
L _ _ L R LSI
If f lPM
LA1 4
,;'3 34
/CI T/CI A 813V C5
/ .01
/ 3 of
RI
/ C2
22,00011 R2
Cl 6811 30118
1201111f
T
3
2.2 MEG R4
0.5 MEG .005
"4- 0
MEG
lq
1;
C4
S5
RECTIFIER R5 R6
35w4 220 1000 85V
34 114V
C7A C7B
° C7C
_
3ou2 231Li 20111 * ALL COMPONENTS MARKED WITH
0
R7 ASTERISK ARE CONTAINED IN
uNIT,N1
336VOLUMECONTROL C2 IS PANT OF OSC. COIL.
FRAME
WI 4 3 3 4 3 4
3
C6
Slow-off-All models except H-759 have the on -off
44.047.11
5005 12 BAG 128E6 124V6
switch in the filament return line. When the 0
switch is opened, the set fades out rather than
cuts off. Model H-759 has a conventional switch-
SWITCH OPERATED
6 AUTO ing arrangement located in the B- line.
Dr CLOCK
4*-1000FT
CLOCK 004 Frequency Range -540 KC to 1620 KC.
MOTOR
ANT CLIPS SO SO
Intermediate Frequency -455 KC. cIA-PW SIDE Si -0Cmv AC INTERLOCK ALIO OUT RECT
126E6 TI 5005 3540
APPLIANCE OUTLET
dh
At
MOO H-763 ONLY. 21
0
TO PIN 5
TC2.7
CT
3544 TO B - 1SE
TC30PC Ci
S2
,25/113
4 3 4 3 4
C6
5005 1213A6
3 IN_
12 BE6 124V6
C4
44.0471Lf
70
22
TC4
800
SWITCH OPERATED 05 -SEC
TOP
V CET 1ST ALIO
AUTOc CLOCK
AND MC
-14-4100Fr !PAVE
CLOCK 0 FILAMENT WIRING - H 759 ONLY.
ON
MOTOR Bottom View, Printed Panel Component Layout - Models 11-762,
II -763 and II -764
22 AUDIO OUT.
TUNING CONDENSER 7 1ST AUDIO
_ 12AV6 5005
/ r ICI TC2
r- TC4
445 1
/ cow. 2 7,C3 .00 Al
120E6 3l B
/ 4105
7011.
LA1 ti 41
L 2.1
2
CIA
/
ASV
C3
RI "WIC 112
22-0000, 411rt 150110
220 iy4f 0
CM/
Ir 1-3
R3
2.2mEa R4
0.310EG ..00sAif
0 0 0
10 MEG to
.047.115
C4
to
1305
RECT.
3S W4
til
RT
330
VOLUME CONTROL
II
TR ARE
PILOT LIGHT
3 4 3 4
C6 123W4 SWITCH OPERATED 5005 128 A6 128E6 12AV6
...00T Alf
NY CLOCK MODEL
4-428
SI S4 55
Si El Si
AC. INTERLOCK 5005 35 W4
WOOEL V TC2-PRI -TOP 128E6
AUTO ALIO OUT. RECT.
H-630 TC3-SEC-BOT. CONV TI
ROOF. ft -ft
CLOCK
° ON
ROTOR -
/ , R. -,q)c\C5
t q (1.
FREQUENCY RANGE -540 KC to 1620 KC .2sc 7 51
51
SVil
'C'110
INTERMEDIATE FREQUENCY -45S KC I- .41 H-838 ONLY.
if 3 2 '2. j 4' le6/
...,17
5 (MIL OPEN ON
AUDIO OUTPUT-.9 watt A/ )>7 4. H-8313)
S2
POWER CONSUMPTION -30 watts 12 BA 6 t\--11
LF.
. ... - , n
i... ca 0.71, R7
-- _______ _1 L...-- c-- "2
12-- , 1.1-Z- NI i
.-i 1
R3 3
;
NOTES 'a"-, ! 1 %
\ 4'.
R2 '-',, 1 1
i li,
a GSj
i
All components marked with an asterisk are i 2 2 i i
contained in a single (N1) unit. '1
TO TIMER TO 2 II TO SWI
X Timer circuit is included in Model 11-765 22 ir S3 H-765
TC4.PRI:TOP FOILCLOSEO 12AV6 MOTOR
only. Dashed lines indicate Model 11.838 ICS -SEC. -DDT. ON H-838 DET.,IST AUD. H-765
connections without timer. A.V.C. Bottom net.; - Printed Panel Component Layout Models H-765 and 11-838
C2-Part of oscillator transformer Tl.
21
1051V 2ND DET.
C ONV AUDIO AMP .00511f
i2Au6 AUDIO OUT T2
I2AV6 55V
50EH5 Il0v
34R C6
41111;
C3 :4706
47u,of 6 V
of
LAI 2.3V
ft
6
2
-*µJ 105V
R2
2.2 N
C4
2.2
15s °v
F ION 220
3 OV
61 4
C1
2 I" f
n 220 470K
ExT. ANT r 5 12 IF 455 KC F
C2 Ri C T1
470K R3 C5
-041= VOL1CONT
=220
LILIf
35W4 R4 lieu
R5
RECT. 22041 I *.t
I25V 1000.11-
105V
as 30 U f 25 20 1.tf
C7A C78 C7C
1.1.1f
35W4 50EH5 12AU6 12AV6
R6
4 3 4/\3 3 4
WI
3"4
2W
C8
.047pr
If N1 SCHEM . DI AGRAM
NI BACK VIEW, SHOWING INTERNAL
CONNECTIONS. ALL PARTS MARKED *
ARE PART OF Ni.
Voltages read with a 20,000 ohms/volt meter, from SPRING CLIP CIA
35W4 50EH5 point shown to 8-, under no signal condition. ANT. CONTACTS ANT. TRIM. C1B T1
RECTIFIER AUDIO OUTPUT 0 OSC. TRIM. OSC. TRANS.
9 1=.-11,11.
J LJ
C7
12AU6
- CONV
TO CLOCK TO CLOCK TO OUT. B+ TO 12AV6
MOTOR MOTOR TRANS. OUT. I.F TRANS. B- FROM CLOCK SW.
FROM
Base View PW Panel Component Layout 2ND DET.- SEC- TOP
TRANS. NEUTRALIZING
PLATE 1ST AUDIO PRI.- BOT. "GIMMICK"CAP
7 it k2 1ST AUD 0 AUDIO OUTPUT
r TUNING rONJENSER 124v6 50 C5
555
845
- -1
2 ICI TC2 3
845-
.00ssif 985 12
/ CONV. 1F It
1
/ 128E6 12 BA6 5
.
Ma I 4.7
I
.1711. 08# R1 LSI
/ 6 885
L '11 =11--1 2 PM
/ V.C.
LS2
/
A CI C .01 v. C.
AMA** .455 5.55
5 Lit
/c2
R2 501-1 IONE
RI 68D.
2
22.00011 4
8.5
A /1 *Ass
TREILE
C3 H-8803
I
ONLY
/0 MEG
C4
R5
IW R6
RECT. 220 *00
35 W4 N,5%
RECT. 1145
35W4
+
3001 25 Mt
iv 20 *If
C7A C7B C7C
R7
3311
VOLUME CONT
FRAME
LINE Schematic Diagram-Models H-830, H-832, H-834 and H-836
800eL8 H-e5om-832,1.-11154.
11
PI LOT
LI GHT CO
3 4 5 4
4 3 ..13_ 4 L
5005 12816 128E6 12856
C6 3sw
x.047 U1
0 I. F. 455 KC.
SPRING CONNECTORS
PARTOP R4 5005
128E 6
LAI)_00P ANTN
rT AUD. OUT. co
ri CON V.
GJ
21
TOP- SEC. 35W4
RECT
NOTES:.
1
All capacitors over are in mmf, unless otherwise noted.
All capacitors under 1 are in mfd.
12 BA 6
1.F. AMP All resistors are 1/2 watt, 10%, carbon type, unless otherwise
noted.
Voltages are taken with a 20,000 ohm/volt meter, between
the point indicated and B-, under no -signal condition.
II pilot light, is used in Model H-836 only.
Cl is part of osc. coil.
Model H-838 uses only 1 speaker and a magnecore antenna.
i2 I2AV6 *Indicates component is part of Ni.
SEC- TOP AVC 2ND DET BOTTOM VIEW **CIA is on underside of panel.
PRI - BOT 1ST. AUDIO
Printed Panel Component Layout-Models H-830, H-832, H-834 and H-836
(See Figures Above for H-830, H-832 and H-834 AC Input Difference)
52 53 S4
12 RAG 1213E6 S5
12E146 12AV6 35C5
RF AMP OSC CONV.
1515 V
IF AMP DET. 1ST AUDIO AUD. OUT.
21 46V 110V
yov
/2
-1 21/ MO Sit
21 -20 ele 4 TO
-2V NO 514 ;° 0
3_1 V 514 72 L31
TO
eV SIO
22
1
2
5 70
-*V
16V
I
L
ti
-11
2
1
6
*003--.0
J 7 L
OA V
LAS CI j
- .C1S
1500 L32
Ll RI
/CIA 7Uon
C3
47 14
1.14
A
4220
R2
TI C1C 22,
4
-C10
Iron .033
17001 Ce
Re 4
C4
C2
.047 CS
/ TONE SWITCH
302
Frequency Coverage: 535KC to 1620KC.
Intermediate Frequency: 455KC. 36 .1;
Audio Output: 0.9 watt. 35W4
RECT
Operating Voltage: 105 to 120 volts, AC -DC. RIO R9
27001W t000n
Aerial: High impedance loop mounted on back. *SW 0
L3 CAA COO CRC
125 A6 TO ANT 12BA 6 B. L-5 35W4
RF AMP IF AMP T2 PILOT LAMP
20.4%, 0
RECT
12 11
L5 3
_RIO _
_ se 33 31 32 34
jLEAJL Misj .2 AV 70
4 3 4 4
4/\3 3
AC INTERLOCK
1:3
04T
C
9 5.1 i _ L4
R9_ 1-'1- AUDIO
NI
' OUT 301
C1
6 PLATE
1
tilvf I 0
C4
1' 3505 NOTES:
j AUD OUT
I --m-xass",
5 All components marked are contained in 1 unit-N1.
c '11 T"
( Re IC Voltages taken - following conditions: 117V line, gang
I
.* closed, vol. cont. at min, no signal, with a 20,000
LI R7 e i7 WV meter.
17
't 1 Resistance values are in ohms -1-10%, 1/2 watt, unless other-
*- r wise indicated.
RS All capacitance values of 1.0 and above are in mmf, ±20%,
and all values below 1.0 are in mfd ±20%, unless
12aE6 TI 12 12AV6 otherwise indicated.
CONY OSC. 1ST IF 2ND I F DET- 1ST
TRANS TRANS. AUDIO
Composite Bottom View, Perma-Circuit Panel
21
1-1009
CONVERTER !ST IF 2ND IF 1000 R13 MATCHED
2ND AUDIO T2 3
T-1033} 0 pT.
r_ AMP AMP 23 DRIVER AUDIO OUTPUT
TI DE T.
T -I300 I 1-1459 T -100!
L AI 4 I IN60A
3 440 .3V 1611
A Ov
C8 5 0
18 OV Q 4 LS1
CV !!!, 32 47MF .9 RI7
12V cl
21 Im R14 I.5V 1200
EE ISOK 100
2.4V 4 1.7V 4J RIO 2.4V
C5 C7
tl
.01 MF
LI 330 XI
a{) ROW L3
R9
R6 1.01 mF
C2 10114F 2 VOL. I.5V
C6 400uK
$33° I5K RB
ME R4 NO. 2
S14. 1611
3300 611 VS3V L2 LS2
R5
6800 RI I 100
47K
V R16 CLOCK 0
Cl)
A -PRIMARY START -s71- -1
B - BRIMARY FINISH. R12
H
C - SECONDARY START 82K SW. I
- SECONDARY FINISH. DPST
R18
82 02 Tj
LA1 2.4V
4
H
Schematic Diagrhm of Philro Transistor Portable Model T-1000'
in.F
MOTOR
B f, 1-1009 T-1009 1-1033 OPT
AUDIO OUTPUT AUDIO OUTPUT T-1460 T-1459 1-1300 -J tl
L3 TO SWI#2 #1 2ND IF AMP 1ST IF AMP CONVERTER tl
MTG- SCREW L2 To Lsi 1.5V
Z3 t2 Z1 e
R19
tl
\
T1
FREQUENCY COVERAGE -535 to 1620 KC.
INTERMEDIATE FREQUENCY -455 KC.
R3 ANTENNA - Self-contained magnecor, highimpedance
loop.
SPEAKERS - Two, 4 inch pm., 16 ohm voice coil
impedance.
BATTERY SUPPLY --- Radio; 2 standard D cells in
3 volt supply center tapped at 11/2 volts. Timer; 1 D cell
supply. Battery type, "A" P.920.
PRINTED WIRE PANEL REMOVAL
L1, L2 a L3 ARE
WIRING FERRULES I. With set on its hack, remove base panel.
2. Remove panel mounting screw indicated on figure.
3. Disengage panel from brackets and gently pull front
ECTOR 1.
set, ( note that tuning knob is a push on opt.
BASE
2 LI NOTE: When re-inserting panel, first position the tuning
EMITTER
knob and hold front above.
C.2 --,.....,
SYMBOL SERVICE NOTES
MARKING DOT,
R2 ..,---------
LINE OR KEY ' 5---- ,..---1 }----------
-.1--, When signal tracing, inject signal at transistor collector
and I. 't input to keep signal across speaker below
. -, ... .6 volt.
IBOT. VIEW1
Normally, the transistors should be the last item
BASING T-1001 1 N60A suspected. If C9 opens serious audio oscillation will
TRANSISTOR AUDIO DRIVER 2ND DE T result.
Component Panel Top View - Showing Parts Location and Tuning Adjustments
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
118 V PHILCO MODEL H-1383
R6
TI
33K
2 5L6
GT LSI
RI
XTAL 2 5
I PICKUP Meg.
Motor Lubrication
RED
OIL
( SAE 20)
R4
WI MOTOR CRI 60 -n -
C3A C3B
80 20 GREASE
Tmfd mfd MOTOR CUP GREASE
_do
PHILCO UNIVERSAL STEREO AMPLIFIER-MODEL SA -1005
TREBLE
CONTROL
235v BLUE
2 VR3
500A
CR
NPVT AMPLIFIER .0033 CS
Of .047 B
6AU6 of
TI
soon
VOL. CONTROL
360 TOTAL GREEN /
rW woorER
LSI
002
Bass CT
CONTROL G2 2.0
IV of T
IN .0022 R3
O;
TWLEE5;E R
o%s
R9
Of
OCR
lr
40
RIO R11
2200 106
D 15 0 ',A,
COO C9B
30Llf :20 Of
vA3
TREBLE
60030
3 61
REPLACEMENT PARTS LIST
Reference
Service
Symbol Description Port No.
Cl Capacitor, 220 µµf, hi comp.
C2
30-1225-11 The SA -1005 is a single -channel amplifier primarily
Capacitor, .0022 mfd, bass cut 30-4671-20
C3 Capacitor, elect.. 10 mfd, 25V, cathode by-pass 30-2417-49
designed as a companion amplifier for the G -line Hi -
C4 Capacitor, .0033 mfd, treble control 30-4650-38 Fidelity Stereo Phonographs. A 12 -ft. audio cable and
CS Capacitor, .047 mfd, coupling 30-4650-62 an a -c line cord are attached to the SA -1005.
C6 Capacitor, .1 mfd, cathode by-pass 30-4650-47
C7 Capacitor, 2 mfd, crossover 30.4681-7
TI Transformer, audio output 32.8939-1
CS Capacitor, .1 mfd, feedback 30-4650-30 T2 Transformer, power 32-8850-1
C9 Capacitor, elect., 40/20/10 at 350WV VR1 Volume control, 2 meg, tapped
30-2575-47 33-5535-46
LS1 Speaker. 6" PM, 8 ohm V.C. 36-1680-8 VR2 Bass control, 1 meg 33.5588-12
LS2 Speaker, 4" PM, 16 ohm V.0 36-1673-11 VR3 Treble control, 500,000 ohms 33-5587-31
122
VOLUME R-20, MOST -OFTEN -NEEDED 1966 RADIO SERVICING INFORMATION
PHILCO PHONOGRAPH MODELS H-1413 and H-1385 T1 (RIGHT CHANNEL
130V
RIGHT CHANNEL RI
50E115 KP'
336 VI
LEFT CHANNEL TE WHITE
I 336
R2
1CLUNIEf,
2 MEG
R3 2.6
285
6 108V
STEREO MEG R7
PICKUP R4 33t2
50EH5 2.7
C1C
M42SS RECORD CHANGER V2 1
100 of
VOLUME 285
MEG 6 108V
PHONO MOTOR R5
2.2 R
O MEG
50EH5
T15.0
O otovf, T2( LEFT CHANNEL)
130V
0
SWITCH ON KS:2
CHANGER
R9 R10
0 115 V W 122V
1600
115V
0 CR I T
60 OF 20U9
0 R8
50EHS 50E/45 CIA CI B
""- -105V
34 3
0471$
IP
CHANGER OR PLAYER-
H-1385-117-volt motor, 4 -speed record player (16,
331/4, 45 and 78 rpm).
H -1413 -117 -volt motor, 4 -speed record changer
(M4255) (16, 331/3, 45 and 78 rpm).
SPEAKERS-
H-1413 and H-1385-4 in., 3.2 ohm voice coil.
GREASE WITH MOTOR
H-1413-Two 4 -in., 3.2 ohm voice coil.
CUP ORME
H-1385-Two 4 -in., 3.2 ohm voice coil.
The right stereophonic channel speaker is mounted
inside the case on both models while the left channel
speaker is mounted in the detachable lid (model H-1413)
410 and in the detachable case (model H-1385).
Motor Lubrication, H-1385
C3
PHILCO PHONOGRAPH MODELS H-1410 AND H-1416
R2
BLUE T1
S2
12E2 0
CB
T"
a
270 :
Cl)/L S 1
A OV 100 g 50n 014
C6 .700
.0047 RIO 51 AlAV
4700
10
R9A
R3
Awn 1 0-1-0
C2
C47
R S3
2 PROD
BLUE T2
0v
C12
27,0
yls
R II
0
6V
5t) -7
- 2 RECORD CDARDER 470
3
ER
0
C13
1,160140
MOTOR
SOOR
TONE 'ROB
Cr
S4 122 V
35M0 016
V rf 3300
mov
CHANGER REMOVAL
GOO
C 1013
Remove the grill from the record compartment. Reach
under the changer base and release the two toggle clips nearest
the front of the changer. Slide the changer toward the ampli-
fier as it is lifted from the case.
123
SI
52
6546 6405
R2 90V
290 V MODEL H -I618
334
C3
Cl SPEAKER SYSTEM
22 FRONT 0033
MMF - SEC. 6 LS 2
5V
H-16168 0-1618
ON, FRONT
RADIO -TAPE SEC. C7
INPUT
R3 50}1F0
62K$ N.P
IR V , R5
11-14113 FRONT /LS I
,r - 0-1616 ONLY SEC. C2 :1000
-.0021 R9 CS ONLY
2.7K .22
JI
PLUG 8.14189 PNI616
SOCKET
SD ONLY
vR 3 vR4 L1
TREBLE EG 0 0
vRI CONTROL BALANCE
500 K L53
CONT
555. 6435
CONTROL VR3
KEG LOUDNESS
CONTROL 54
28(6 53
RIO 906 6505
I 6406 2908
330 LS4
CI6
vx0. 1-
CS CI5
C12
C13 RI5 50 MFD \
14aF 758
-.0053 047
N-161 560
I
ONLY REAR
I I
811 SEC. MODEL H-1418
180 7 REARSCE
RI6
4 2I EIV SPEAKER SYSTEM
1820 913 RI4 470 0
RI?
1005 L55
SS 270
REAR
1 STEREO 80048946 SEC. RIM C14
r MTN .0022
2.7K .22
I STEREO Pos. T um
RI2 50K 160V
IFrippl
RI 100
LS6
R19
CI
+488 M43 295V
H-16 6 ONLY
RECORD
I
1
S5
CHANGER
3 6X4
R20 R 21 1750
leK
14.4. !!Do
SOCKET C I7C17 8
MFDI0An Gi
J2 LS?
ToMFD 10 MFD
( I
6405 6405 44306 6546 LS81
4 4 55
/ I
23
6
} REK,TE SPKR UNIT
3 3 3 3
PHILCO PHONOGRAPH MODELS H-1418, H-1616 AND H-1618 Nsxi
s.
6443
SPEAKER SYSTEM- MODEL 1616
CIRCUIT-A dual channel stereo amplifier. Each chan- <6" CY
nel contains two tubes. One rectifier tube supplies volt- EXT SPKR
i-
SOCKET
CD
ages for both channels. Loudness, bass, treble and bal-
ance controls are included in the amplifier.
4'
OPERATING VOLTAGE -105-120 volts, 60 cycles, AC.
POWER CONSUMPTION -75 watts. EXT SP
SOCKET
<°"
Top lieu' of Amplifier
R14
SeTe. ros.,oes co,
Of* PHILCO HI -FIDELITY PHONOGRAPH - MODEL G-17105
7 ...oho woRavm.
s,Ego
4,Y T1
52 3000
eve,OT Wit
TEE RNM0..0( INFO. 51
1,AXT
co.' .00r .U7 300
SO ISOV
3155. 1...111L0
JOI
I I
T.., COr 0
0-- P.
f
-141,234. I. T RII
I AD IR
0
1
lr VR2 VR3' Ce
290V
I
II SWI
I 1 T2
II
RIP
'PRO MASTER UNIT
SLAVE UNIT -
1C12 4.7K
I_
0
(s"'""
-cx,
C22
56
_
a3
T3
R33
LS4
III
RIO eveST 3.111
vOt 4* IC11A. C24
Ri9 ss
LSS
5
2 ISOV
VRe 55 Solt
Ix cox I&
WOK
R20
al
soJetr R23
0.- R21
r
2
,
0....
sv Sv
L- R21 2.21
C20
J3 00
ITN 17 lii LS6
R24
OASS TOM*" "P.. 5.11*[.
CO,AL VR6
290v
MASTER UNIT
SR
SLAKE ST3GT R34
315v RON
220. 001 C25 RUN CHANGE INFORMATION
Run 51 A change was made in the function switch to
C26 "1f0 C266.4,0
U
"1' L. L./4
open the circuit from the right-hand portion (R) of the
P2
tape/tuner receptacle J1 when the function switch is in
R37 the tape/tuner monaural position. This change avoids
NETWORK NI OR N2
wR
; TNgT4: g: NI R38 S garbling if two different signals are applied simultaneously
to the R and L portions.of J1 when the function switch
SPECIFICATIONS Operating Voltage -105-120 volts, 60 cycles, ac. is in the tape/tuner monaural position. This change is
as follows:
NOTE: The G -1710S contains two chassis, the master Power Consumption -155 watts. 1. Bend the short clip at #4 lug on rear side of the
chassis and the slave chassis, mounted in one cabinet. Record Changer-A Philco 4 -speed, automatic record front section away from the rotor. There is a blue
Cabinet- Wood console, mahogany, blond or walnut. changer, Model M-41. A stereo, cartridge is included in wire attached to this lug. The other end of this wire
Circuit-Each chassis contains a three -tube amplifier and the chattger. For record changer service information is connected to R of J1.
a rectifier. Controls include bass, treble and loudness refer to PR -3279. 2. Interchange the blue wire mentioned above (con-
controls. A function switch is included in the master Speakers-Two speaker systems are used in the Model nected to #4 lug) with the wire on #5 lug on the
chassis only. G -1710S. Each speaker system consists of one 10" front side of the front section. The wire on #5 lug
Audio Output-Total, 40 watts peak output (20 watts woofer, one 31/2" mid -range and one "S" type electro- is a bare wire. This bare wire connects to lugs 2, 8
each amplifier). static tweeter. and 10 on the front side of the front section.
SNITCH SHOWN IN -OFF ROSIT1ON
SWITCH POSITIONS CYO ROTATION Schematic Diagram, Model H-1714
1. OFF 4. TUNER -TAPE MONAUWIL
2. PHONO MONAURAL 5. TUNER -TAPE STEREO LI
IN 519
3. PHONO STEREO 6. TUNER- TAPE STEREO RE VERSE (SEE EXPLANATION) 3.35
w A1
VI RI7 CIS 111,
V3 .001
SWI 6AU6 4.
R RIGHT CHANNEL 6805
58 @ AA
TUNER 120V
RI C13
INPUT ^,12I, CS .3 40V
33K x 0033
FRONT 111 7 RIGHT
C9 .0047 CHANNEL
7-
RI3
47 s VR2A KR 3A .047 SIR 9
CI \AA TI
225V 0
§ 2
R11 48011
SS 53
SECTION I 20K 2.3V 3
SOCKET SOCKET
13 150RIS
RIGHT
1170K 6.5V SPEAKER
C3 R7 R21 PLUG
.0022 1009 4.7W
VRIA e-' 54.1.
P:S.0 1,0"1 R9 CI I L3
INPUT 3.99 .22 MN
PLUG , L55
WOOFER
I0O -41 .L1142
R20 'says
MEG 3.3K
El BALANCE
18 Pa
6AU6 CONTROL
1711111L -V-4, LEFT
VR44. 4.711 .001
LEFT 2 sW CHANNEL
ROY
CHANNEL1 12 C12 ,0022
R2 IB
331( C8 340V 72
1. F..0033 6805
CI6 S2
I O
SIN 2 .0047 "S. LS2
CO RI4
REVERSING Icy
47 V538 ,047 56K ,
SWITCH SECTION 2
VR2B
2165,
95V
RI2 iff)
12 R4 2.3V 47011 SOCKET
1208 RI6 LEFT LS4
150 SPEAKER D -RANGE
R22 +C7 PLUG BOK
6.5V
114
RE C4 100
0025
RIO CIO
*CAMS ARE CONNECTED .22
3.9K
+ CAMS ARE CONNECTED
G
50K
so AA.
1123
SECTION 3 .22
FRONT
las C22 V5
6B5v4 R27
AND 4.7 Al 0
8 73
REAR .N1
R24 525 R26
1001/ 220 10K OK 205V In
2
C20
S3 .01 6T2 0
TUNER soon
POWER .r.r.C23A C230 = C23C - 40
SOCKET 0211 40u1 30u1 100
RECORD .01
7 14.0sC2t
CHANGER
241,
I R28
SW2 1 S4 El 61314 6805 6 905 6AU6 6AU6 56
PHONO 14.4.
SOCKET
R29
SEII -vs
ly 5 56
L PHONO }I3 II, "A.
PLUG
1. sra
72
3
0
Ins
LOUDNESS CONTROL WOOFER SPEAKER TUNER -TAPE STEREO REVERSE by the rear section of the reversing switch to complete
Output volume is controlled by the two ganged As can be seen on the schematic, the circuit of the the circuit. X
potentiometers, VR2A and VR2B connected in the woofer speaker, LS5 starts at chassis ground, goes Since both right and left channels jointly drive the -I
6AU6 grid circuit. Since this control adjusts both through the secondary winding of the output trans- woofer, a phase difference between channel signals
channels together, a balance control, VR4 connected former T1, to the woofer. From the woofer connection can cause cancellation and loss of woofer bass. Using .fa
between the 6BQ5 stages and ground is needed to is made to the reversing switch (section 2 contact 2 of the reversing switch to reverse the secondary winding
equalize channel outputs. SWI ) and the upper secondary winding of transformer of transformer T2 in its relation to the woofer and
T2. The other end of this winding is then grounded ground corrects this condition.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
RCA Victor C-2 and C-3 Series, Chassis RC -1188B, RC -1188D, exact material
on this page. Series PC -1, Chassis RC -1188A, are practically the same electrically
but omit the appliance outlet. Series X-3, Chassis RC -1188C, are electrically
similar, but omit entire clock circuit.
12BE6
COHV
12B"A6
OE T
12AV6
!V_T Au010 POWER
5005 OUTPUT
T2
1
PC I
C6 T3
92v 92v 1 S I -1 50V 15 125' 1120
BLU
IOopi I(
I
O 1100 005 Re .o sI
LOOP
P71
410K
100 11(D1 CT RE_52;
5
R9 -I'M
10)
11'
6.13mEG
1. 1 V 6.7 ORR
2 53K C5
BMM- R3
.005 Ca 1200
C2
100
220 912
56 L 1200
Yee.
C
C1OB
T R2 50 her
0091 2_1
9!4!
I
TI 100 C 10A
Oq C13 T30mf
ICE SERIES/
CZ'BY
2 C5.6
I 0' SOME
ICS SERIES/
PC I
T4
3.3 MEG
OSC COIL
TERM. VIEW
C3 V5
04,
R? 35W4
RECT
"
04?
I( 1000
MEG
VOLUME 5 ff--
ALL RESISTANCE VALUES IN OHMS. ALL CAPACIT ANC CONTROL
VALUES LESS THAN 1.0 IN MY AND 1.0 AND ABOVE IN mmf. V3 VI v2
EXCEPT THOSE INDICATED. INTERLOCK
12 Av 6 12E1E6 12 BAS 5005
CHASSIS REMOVAL 5 4 3 4 3 4 44.44
115V. AC -60,
1. Remove three cabinet holding screws; two on bottom and POWER
SUPPLY
one at top rear of hood. RED
RCA4
2. Grip cabinet with two hands allowing fingers to extend over
edges of cabinet front. r,:414T @ II
3. Hold cabinet, front down, and shake in a vertical direction. APPLIANCE 3.
Cabinet assembly will separate and the fingers will limit OUTLET
WOO WATTS MAK./ T IMER
the separation. C3 ONLY WITH
SWITCH
4. The cabinet front and chassis assembly may now be sepa-
rated completely. The clock -timer features not only the commonly accepted
CABINET REASSEMBLY
self-starting type of clock with sweep -second hand, but also
Place chassis front and chassis assembly on the cabinet back a clock controlled switch which will: (1) turn the radio off
1.
so that the ribs of the cabinet front rest on the bottom - after a period of operation of up to 60 minutes (sleep); (2)
inside of the cabinet back. turns the radio on at a time predetermined up to 11 hours in
Push cabinet sections together firmly.
advance (Auto), and, in the 'C-3 Series,- sound a buzzer
2.
Insert three holding screws; two on bottom and one at top alarm (if desired) a short time after the radio is energized.
3. Lever type clock -timer function controls are located at the
rear of hood. TO SPEAKER perimeter of the clock face for maximum ease of operation.
TO CLOCK
TO
RED WHT RED The power supply attachment cord is fastened to the cabinet
CLOCK BRN. BLU.
and becomes disconnected from the chassis when the hood
\LK is removed.
7
C11
r VOL. CONTR.
R 7 OSC
COIL
600KC
T4
C3
L.J Complete Chassis Assembly - View from Component Side
127
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
RCA Victor T-2 Series, Chassis RC -1189A.
T-1 Series, Chassis RC -1189, and PT -1
Series, Chassis RC -1189B, are practi-
FERRITE
ANTENNA
cally the same.
WO
0
TS
s au oar
OS
217410
hs, Amp t.t.' "
11 L.ILZ
I 1 f
02 II. -LA
204 10 ofic
ic.
as
O
.05 Ns
1000
Re7
5600
R9
337
RC
70
C10
IOM;
INS C12,4
RE 220 L. 100 MC
6.900
TI
1 RI
22 K
TRAPI.17ORS
0
ost, c OiL
4 S
70740 MITER( CIREENT
NO OLITRILT 10.54.4
pit DOI
72.73 r4 VOLTAGES NEL1SUTLED 10114, .10170.104751.
FROM I-7 011/21%.7101.20 1101D WINNE 120%
ovvr NOW 6177ir% VOlvw CONTROL 41
ALINNAINI AND 40 SASNLC.
Cree
1.mm,
R14
47
\ 51
ON 70c
CONTROL
7100 007 20 AI* 0111117.14.0TA4
'DOLAN owPor -42.5744 K.7000 . AN. DESISTANCE 0713 W ONNS
ALL cALIKNI.KE Nit/ES LESS rNscl 7 D.C.
"F 2 C
l I OAK OUTPUT - 70.00LA
76.170w 5 VIER API IM Twv, *KW 1.0 040010 ARE IV NW
11111, 4S NOWT.
.3.75335
C
rsRAINIAL NOV IF NAL VIEW
CAUTION -I
Damage can result from try- vERL,TE ANTEN4A
0 La 4 ing to pull or pry the tuning
Z knob off from the front.
To remove-remove the three
chassis mounting screws,
-1-
grasp the tuning capacitor
and pull it out of the knob. ST -L2
r
1 I le)
oi
1-1-
< af!
0 Q.3 Fc a
(\I C0
I- k
.0
%
-t +ix o) g.'.
,-,
It"
0< IC
E
a. o
-it) F17-3.
cut!
oci
c7
0 Ne
j,cr m EID1
trlil I CC
tr., I
cr
/
L.__ J ) 0
ss
0
(.1 en
r
i0
ls)
/ Ac
LI -Cr crT h
\p_Ls ms. sse, et, .80
6b. CO W EA.
er
128
0101A 01018
12018 12DT8 v VIA
FM. Sof FM. CONY 03
FM TUNING UNIT 12 BA6 12 AU6 1918
0110 C112 1 12BA6 2ND. F M AM 380. F.Y.
O IS F.M. DEC
1ST FM IF I
F AMP F AMP
Cl 05 T4 10.7MC
20 8e0 FM 910. FM 910. FM 62V FM r 1
GGV FM 11 107V. AM 11-
33
t i 1 91 V T TO 10.7MC std 62 V.
10.7 MC FM
s
To,. B1 a a
:IC 17102
7101
210 TT 'HA 910. 1
33
73134.. 0.33534
1
FM
as
1.70 w 0.4n .0. 22 T 0.320 FM 0 5. 0.35nI
-0--w-r i2Ct1.6/o FM 1.1V.
L102A: co16 8101 C111 o' 7 L_ t
FM RF : AT
AM L Re
20 I MEG 001 vW DK 120
101 83 R4 4.O/V1,-.4
C101 'FM TUNING C7
,c) 1.1028 100K I50 Re
CO - 82
700
LIO2C 4700 NWLAN4
FM 108
clot C1 R11 RIO
C103 OSC
.001 81 4700 100K 100K
C102 -1
.001 4700
C108 Te 45561
66
4- 4%
7.3n 7.3n
250 l0 250
20 3 4
HEATER HEATER RI2
CIRCUIT } RI CIRCUIT 82 125 100K
1000 3100 9
RI
R27 R28 2
VIEWED FROM
5008 500K C3 KNOB END R14
.01 FM TUNER TERM. BOARD V2 CONTLY
476
ABOVE CHASSIS ACTS
FM 128E6 MOVE
BELOW CHASSIS T5 455KC
ANT. :L103 AM CONY.
BOARD r,
V2 V7 75n
PIN 4 R26 RI R2
PIN #3
100
RIB CII
INDEX E. AC .LICLY Vie
O
POWER SUPPLY 2.2 MEG 1000 =
L_J 52 19 TB
ON c-) AM DET 5 1ST AUD. I;d
RI7
338 R15
CONTR R (--) ,:, .6 , Cl3r ,_C,1: 5008 1 45V R22
SI SHOWN IN EXTREME CCW VOLUME 701(
A.M. OSC. COIL i 0.65
POSITION- POS. R I 7 CONTR.
G4 2%'-' C la I: 'T: MLOSC.
POSITION FUNCTION .-) u2,, av v COIL 132V FM
301.5 01
,
AM C27 130V AM
K 1000 j/ 129.8 e I. .01 Rie
F M. LI SAY Yu -N114 -E- - 35C5 940 FM O
ALL RESISTANCE VALUES IN OHMS. CI6 4.7 MEG. T
AM ANT OUTPUT 109V AM
ALL CAPACITANCE VALUES LESS FERRITE .047 BLU URN
821
THAN 1.0 IN MF., VALUES ABOVE 1.0 CRI 108 C29 C20 260n
142V A/VT, 4700
IN MMF EXCEPT AS INDICATED. 0047 RED
III
v? 0101 01 V TO 04 22 II n
SILK
35C5 12078 12 8E6 128A6 128,86 12AU6 I9T8 BRIX. CD
VOLTAGES MEASURED TO CHASSIS GROUND C25 C30-- -54V.FM
C247 02 ._7T
WITH .VOLT01111117. AND SHOULD HOLD 3301 R20 6.50 AM RI9 O
\ R159 47 150 1200
WITHIN !WS% WITH 1170. LINE VOLTAGE, . 44 44 2 MEG
VOLUME CONTROL AT MINIMUM AND NO
SIGNAL.
14
* CAUTION: GROUND IS CHASSIS
TO
3.E'PM 20EM
T2
401
5
lir AM FM AN,
1
823 DSI
TYPE NE SI
L2
A 1.4 050
'Ts
228 or
if, F.
POWER UNE
INTERLOCK
NT
CI: c.g
2
1
x C23
C26A
rl BOMF
_
B
940
109V AM
FM TONE CONTR.
AlC266
TI 50MF
FM DISC
10.7 MC 10.7 NC 10.7 MC 4.55 KG TERMINALS TERMINALS
.-/- -.Z. INSTALL WITH
FLANGE COLLAR
V5 V4. V2 TO OUTSIDE
/*-- 12 BEG.
12 AU- G 1 12 BAG e
ORR EN S Z.T AM Pe- AM CONY
Fr AMP AMP
VG A VI T102
12BAZ 15r Cil A
FOS
12278 1.5) c 12 B
IF AMP FM IF CIO ,
AM -FM DET. ,
CIA Pr AMP 10.7 MC
AUDIO AMP FM CON _ I
V7 00
OSS ski OF
350 C107 0104
OUT PUT
f... NEN TUNING SELECTOR
RI5 BULB Si
:.',.. VOL CON T. SELECTOR SWITCH SHAFT TUNING SHAFT
_ 4 sz swirC14
ON -OFF SW. Dial and Drive Cord Drive
Tube and Trimmer Locations
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
RCA Victor X-4 Series, Chassis RC -1191A, material on this page.
C-4 Series, Chassis RC -1191, is electrically the same except
for addition of timer -clock with switch and appliance outlet.
V3
126E6 126A6 12AV6 5005
CONv. IF
T2 OET - I! AUDIO PC1 POWER OUTPUT
920 r3 C6
NOV® 1124.
5 If
005 114
lo CT
RIO
4704 09
6.8 MEG
22-0
C5
.005 CO
R II
220 150
®
GIB
11.2-
392.5
NO
474
PC I
314/4
6
RECT
03 C109
v1 V2 V4
30144
R7 124v6 12E1E6 12E146 5005
1 MEG
VOLUME 3 4 3 3 4 3 4 3
CONTROL
ANTENNA CHASSIS REMOVAL
#12
1. Remove two holding screws in bottom of cabinet.
2. Loosen captive holding screw at rear top of hood. DO NOT TB SI
Clie-- ClIci
C1141-
TRY TO REMOVE. 05C COIL
TERM. VIEW
ON VOL
CONTROL 01A±121_1". 115v AC -DC
3. Grip cabinet by its ends, from the rear, allowing the fingers 1-41.1)
POWER
SUPPLY
to extend loosely over the front.
4. Hold cabinet front down cmd shake vertically until front
separates from hood. Fingers will limit the separation. as J
*
4 >
41.1
3c.)
'now
>mcc
IK)
L.)
-1;
t0
w
-03 oz 0
>No
130
4
TOTAL BATTERY CURRENT
VOLTAGES MEASURED FROM + BATTERY EXCEPT AS INDICATED ER
SEC.FIN. PRI. FIN. VOLTAGES AND SHOULD HOLD WITHIN It. 20 WITH NEW BATTERIES. I30n. ICJ./ BLU
COLOR OUTPUT IMV/ 1 CURRENT 1MA 1 VOICE COIL
SEC. ST. B E E C
DOT
O 10 01 0.22 3.8 5.8 NOTE
PR!. ST 'SEC. TAP 20 27 02 0.07 1.9-----5.9 ALL RESISTORS 1/2 WATT UNLESS SPECIFIED. J I
50 37 03--___-0.15 ;fr.(
250 68 ALL CAPACITY VALUES LESS THAN 1.0 IN MF EARPHONE R25 RED
OS L. COIL 04______0.16 5.9 JACK I2K
FERRITE MAX. 86 05______0.12 5.9 AND 1.0 AND ABOVE IN MMF UNLESS SPECIFIED.
ANTENNA BLU
06 0.16 1.5 5.5 V H
07 0.13_ 0 5.8 05 07 C19
_1_ 08 0.13 DETECTOR 2N408 2 N408
R7 04 RED .33
T5 1ST AF OUTPUT
6800 BLK
.N410
03 T4 22,D
LI
--EC 1A LL C2 2N410 F,7___ T 7_, C
T1p O- -7- 2-16 02 T3 1ST I.F. irr4
146.2 T2 C
2N412 1
1
CONY. 5 0.9n 2 1
I
110_Z
c. E. 0 .1 /IL II 5600
2 4 2 8 2 :61
0114
2 C1C _T _I_ f 0, 072 R26
0 0l 5 1.7n
INDEX I g
9.5. 73 I-4- O c, 8o 8 .°T1 <01 On
DOT 0116 01 -OD 0 1 0 , 06 ca0
I 6 0, 0 I 11 00
TERM.CONN. FOR 2N C7 01K,
IT3
10.5ns.sn. s_i 2N408 O e 57 2
TI
544CLti 5.t 819 DRIVER
I
RF AMP -Is 2-136-r-'12 `-' 9c
1.os /0 0 4 5K
C I
VOL.
-13 3 5 14
5I R6 RII CONTL.
3 (
3300 39K RI6 CI6 0
5600 10 MF 08
L2 .------1 R20
R5 C13 2 N408
INDEX DOT 1516
L/4 .055
6800 RI2 RI3 1 .05 OUTPUT
0 0 2 6800 680 ,-
C12
6 0 0 CI 8 10 MF R18 R21 R22 927
4 0 0 R3 R4 15K 3900 470 I2K
500 22K
9.3-85.8
R14 C14 -1- R17
TERM. CONN. FOR OS R2 5600 :01 Z 470 0 C17A 1424
T5 2200 100 MF R,I273 47
T ,1\1\./s
1000
SI
10C017MIF 190 111F
EARPHONE CONNECTION - 4
INDEX DOT 43 1
6.0 V D -C C SIZET
BATTERIES
a 2 SEC . FIN. Only a high impedance earphone (2000 ohms) should be 11111
_Li]
PRI. TAP 6 0 5 S EC. ST. I III 11111
PRI. ST. 4 o 3 PRI. FIN. connected into the earphone jack. RCA accessory earphone
L ' Number RK-219A is recommended. WS' .74" Q 0" <-30
TERM. CONN. FOR FERRITE
pc7 (1.-.*-3
T3 B T4
9..
9
2N408 LI/ L2 ANTENNA ..4
DRIVER 2 r, z. a !°_.
R21 R47
sa.:tmfis
g.
2N408 2N408
OUTPUT OUTPUT 57'
#2
T2 -
RIO R7 OSC. tc,
ao, .6-.76 00
R20 600 KC C4
0 ro
R23
R22
RIB
TB
SI 08 0
C O
0
1620 KC
oSc.
op
0
1-14-112.(1-;
ag-oZg
DRIVER 05 r e- C3
TRANS. 1400 KC
2N408 04 R.F.
IST A.F. R25 R26 R27 CIO
RI6 1 RII C2 D
RI2 400 KC P.0
R13 ANT. ,00 k CD! s
i .elig:
455 KC
CI4 a. a. 2° ° 47,2 0:9- '11
RI5
R17 455 KC C9
C5 <
2ND I.F. C6 qq
p. gI iT 'A 5
455 KG 8 g -amg IS
C.;3 -16T t 4 -8.2.g. -43.E.:
C3 R14 CII C8 R4 TI R2
Q 8 (4 8
2N4 I 0 2N412 R.F. 2N54 4 47. 6,,
2N410 C7 600 KC RI R3 R.F. AMP. 0. 5.
2ND I.F. CIS 1ST I.F. RB R6 CONV. R5
Transistor, Major Component and Trimmer Locations
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
RCA Victor TX -1 Series, Chassis RC -1196A, material on this page.
TC-1 Series, Chassis RC -1196, uses practically identical circuit,
but has a single speaker and includes a battery operated clock.
JI FOR RK2I9A EARPHONE
02 03 OR EQUIVALENT 3'
ERR I TE
ANTENNA
2N410 2N410 rit RED
PM SPKR.
130.
CT
I.F. AMPL F AMPL.
1ST
T3
2ND I
T EILK
VOICE COIL
r 21 4 21
04
514 -
214408 PM SPKR
A F AMPL 130.
CT
VOICE COIL
0.2V
RID C12
6800 co 33
CRI
C8
.05 DET
DIODE Ril 05
15K 0 1V
2N408
CONY. OSC. COIL
CR2
OVERLOAD C9
VET OUTPUT
0.9. DIODE .03
O.ISV 5V
O V.
RD
1000 2 RI2
201
2500
VOLUME
CONT
g."-WP-4-1,,.
700
72..
RIO
47K 0.1]V.+
06
4 5V
2N408
0.I V OUTPUT
R3
2200 RI7
R6 R7 R9 R13 6800
470 000 330 220
R2 CIIA
6800 100MF
R14
47
VOLTAGES MEASURED WITH "VOLTOHMYST' C11E1 6 Si
FROM (-) BATTERY, SHOULD HOLD WITHIN TIOOMF ON VOL.
S20% WITH NEW BATTERY, VOLUME CON- CONT.
TROL AT MINIMUM AND NO SIGNAL.
CD K1000. ALL RESISTANCE VALUES IN OHMS.
ALL CAPACITANCE VALUES LESS THAN 1.0 ARE IN 4.56. D.C.
MF, THOSE ABOVE 10 ARE IN MMF EXCEPT AS NOTED 3 RCA BATT.
_I VS335
A
6,
Ll F
oe
-Jr
0'
n
L
"
JP
132
08 Q2 03 04 05 LI FERRITE NTENN
3458 2N4I0 2N4I0 2N406 2N406
OVERLOAD 1ST. I.F. 2ND. I.F. A.F. AMP DRIVER 16. 1111111111111111111111V
LIMITER , O
STL1 FIN L VT".1-J
R7 r4
N
TRANSISTORS
oZ
T4 B INDIA DOT (I) t N
O
455 KC
TERMINAL vlEw
TI
(OSC.)
600 KC
ROCK GANG
0
Q1 Ao
2N412 Oro
CONVERTER
CIA (FRONT) OSC.
C1B (REAR) ANT.
RI
C3 1
C2
FERRITE .
ANTENNA 1620 KC 1400 KC V
N
12,
T2, T3, T4 13.74
Q7 N
J2 2N408 2N4os SEC FIN PRI FIN
DO; 4
°
EQ°q,+ CHARGER OUTPUT OUTPUT SEC ST 3 A S
PRI 2 I
INPUT ST
4.05 SEC TAP
11 -711 --
TERMINAL VIEW TERMINAL VIE
BATTERY Chassis Layout - View from Component Side
OUTPUT CURRENT
NO SIGNAL 10 MA
vo
50 hi 32 MA 05 03 02 Q8
00'M V, 42 2N406 2N04406 2N4I0 2N4I0 3458
500M vi EF 4 DRIVER A.F. AMP. 2ND. I.F. 1ST. I.F. OVERLOAD
LIMITER
CI5 CRI
R2)
VVV
VV V
T1 y,
(OSC)
TO
5:
PHONES RE
o
JACK z
1, 0
0$
2NQI4I2 om
CONVERTER
ho
C4
zz Ts
0 o
Ao. CZ0 lor
Co c
CO CO
CI7A CI6 I
Q7 06
CI78 2N408 2N406
OUTPUT OUTPUT BLK. BATT.
RED! /BLK.
1 0 4 5 000 I
SPEAKER Fly
Chassis Wiring and Components - View from Wiring Side
R2A VIE V3
SOON 1/212AX7
TREBLE CI AMPLIFIER 6V6GT
CONTROL 100 LC OUTPUT
^T^" 2E15V
3
WIA
T RIOB R9 RI7
300 K 47K 4 KS -2S
ds". ISO ---
RIA LOUDNESS 2W r
2A? CONTROL LEFT
2 MEC 13.5V CHANNEL
BASS R3 332K ISIK 84K SPEAKER
CONTROL 180K cm)
CS
.047 RII RIO
22K 8200 VS ~COED
SOMF
6 C7
6V6GT
3 .CO1 RIC RC OUTPUT
I MEG 265V
RS
I 1.047 BALANCE
CONTROL 3 L
2ZOK 0 TZ GRN P3
R14
VIA 47K S
WS.
Y21 2A X7
AMPLIFIER RICA 32013
54
R25
BOOK
332K 84K 84K SOOK J3
O
CP
CS J_ LOUDNESS
TREBLE .047 R6 CONTROL
REAR R CHAN CONTROL 100 220K
VIEW 160V RIS RI6
"he ZEN
C4A 8200
W113 201AF INT
R19 et Ca C9 EXT
2.2 MEG 2B
PI Ot I 1.047 2 3
PIN
VIEW RIB
2 MEG R4
BASS 180K S2
CONTROL
C4B
35 ME
R8
LEFT RIGHT 2200 J4
CHAN CHAN 2W
r T3 GRN
'CI
V4
C4C
351.1F
NOTE- ALL RESISTANCE VALUES IN OHMS. 320XLD
r C11
4MF
cr
ALL CAPACITANCE VALUES LESS THAN BLU (NP)
SY3 GT 1.0 IN 1.IF AND 1.0 AND ABOVE IN NNE
T RECTIFIER UNLESS INDICATED. BLK
8' IN PD -23
YEL-GRN 29SVP 85MA 61/2' IN PD -24
J2
REAR VIEW YEL
'/2" lD
o RED-GRN RIGHT
ELK RED CHANNEL
MOIL V3 S2 ir+I
117VAC RED-YEL V2 VI SPEAKERS
60' 6V6GT 6V6 GT 12AX7
POWER 0
SUPPLY fr:1950. , INT ONLY - USE WHEN LEFT CHANNEL SPEAKERS
BLK RED ARE NOT CONNECTED TO .13 3
4 INT -EXT -USE WHEN LEFT CHANNEL SPEAKERS
o BRN
Aa A /1\?\ ARE CONNECTED TO J3
31/2" 01
O 0
BLK-BRN cra CI 3
NOTE - The "ON -OFF" switch is not part of the volume 0
3
control The record changer must be "ON" for power to ,-
O
ACCESS TO TUBES AND CHASSIS be applied to the amplifier. CD
et a
Model PD -23 The SPEAKER FUNCTION SWITCH (S2) must be 0
The rear of this cabinet is open allowing free access to the in "INT. ONLY" when internal speakers only are tD
tubes and chassis.
used (left -channel speakers not connected to J3). to
Model PD -24 "U C
Access is possible either by removing the bottom of the (i) 3
For stereophonic record reproduction, an ex- fv
cabinet or by removing the screws at the edges of the record ternal speaker system must be connected to J3 ri:
changer motorboard and lifting the changer. and the speaker function switch must be in CD
"INT.-EXT." position.
VIA V2
1/212AX7 6AQ5A RIGHT CHAN.
RC A F AMPL C3 INT. SPEAKERS
R C OUTPUT CIO
0.047 TI 4MF
150V 262V BLU.
fl 5
NP
GRN
04 R9 401
0.01 22K Ri3
40.
47K
'.."* YEL
BASS R20
TONES 100
TRETio4s IW
R2A 3
2
2MEG RSA BLK
C5 RIO 61/2
500K R7 0.047 8200
220K BLK
R3 - CI C9C
20 mF LOUDNESS C9D
20MF
ti
180 K 00 RI4A
5008
816
JACK
R6 MEG.
PIT (ON FRC 4T)
1500 BALANCE 150 S-2 .
R4 2W
RI POS I
IOMEG 180 K - C2
100 T2
LOUDNESS
R8
220K C6 RII R148
0.047 5008 113MC7N0jP4HONIC
BASS TREBLE 8200
TONES 2 TONES
TB R2B R5B
2 MEG 500K 1-7
its, MOTOR 7
RIS
BOARD 47K
C7 RI2
VIA 150V
0 01 22K
v3 STEREOPHONIC
0 0 212AX7 C8 6A05A 262 V. P JACK
LC A F AmPL 0 047 LC OUTPUT ION REAR)
C-_--=0
RIB
T3 TEL 2700
272 v a 94 MA 6
P -2-F
3 BRN 5.0 V AC o 1W
TEL. C9A
L NOTE PLUNGER TYPE SWITCH
- - C98
40MF I I 40 mr
V9 (52) IS ACTUATED (POS. 2)
5Y3 WHEN EXT. SPEAKER CABINET
BLK RECTIFIER
P-2 ro, 2 ISMOUNTED ON FRONT OF THE CII
4MF
RECORD PLAYER CABINET. NP
LEFT CHANNEL
TO RIGHT EXT. SPEAKERS TO LEFT
ii5V 600,
POWER CHANNEL PHONO CHANNEL
SUPPLY PEAKERS AC POWER TO CHANGER INPUT SPEAKERS
T1
VI v2 V3 r6AQ""s\ T2
12Ax7 6405A 6A054
5 6A05
riN\
RIGHT CHAN. T3 RIGHT CHAN. LEFT CHAN. LEFT CHAN
5 OUTPUT POWER
OUT PUT OUTPUT OUTPUT
....... VI
TRANS. TRANSFORMER I2AX TRANS.
A -F AMP.
NOTE - The "ON -OFF" switch is not part of the volume `c±7/
control. The record changer must be "ON" for power to R16 R2 R14
be applied to the amplifier. 1 BALANCE TREBLE L LOUDNESS
LBASS teR5
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
RCA Victor SES-3 Series, Chassis RS -184A. Model SES-4JE, RS -184 is similar.
V1 - A v7 LEFT 04.
12AX7
AMPL
5005
OUTPUT
SPKR.
.4" PM.
BLU TI
7 172 V.
12 ,---
325210
CG TOT.
R2 -A .047 6
2 MEG. 2.5
GRN
VOL. z
CONT.
1101MI R8
220K R12 R13
RII
500 K 82 1200
BAL.
RIO CONT. ___9LcK81.YcEL
220 K
30 MP-. f
CO
R2- B RIGHT CH
6 T2 GRN SPKR.
2 MEG 2-5
VOL
CO NT 325 -CL.ID sl!pm.
MOTOR awmt .047 7 122V TOTAL 'F) (F'
BOARD
GI4 D. BLU ELK
VI B
-wr 12AX7 VI V2 V3 50 9VTC: 1:!5
:UT
RED WHT. AMPL.
9 53
RIGHT
CHANNEL
LEFT
CHANNEL CHASSIS e1-
9
0
3
---11104 RED
ci
136 V.
COMMON R15 CR1 .T.C8130-mAF
GND. .047 r WIRING (-13) 33 RECT.
ISOLATED IBLK
'IT \-0015' SI
P34.1 J3 -F FR.CHASs1S
MOTOR 3 0
2 0 ItSV. GOA,
0
I C SUPPLY
GOA
CAPACITANCE VALUES LESS THAN 1 IN ME. C8B
I AND ABOVE IN MMF. UNLESS OTHERWISE H5 V. AO
INDICATE D 60 '. CRC
V3 V2
RESISTANCE VALUES IN OHMS. 5005 5005
K= 1000 R.C. VI
UTPUT OUTPUT I2A ST
TO
TO J2 A F AMP
R. CHAN.
SPEAKERS
RCA Victor Model SES-2LE
Chassis RS -185 J3
PHONO R. CHAN.
MOTOR JI
TRANS.
POWER PHONO-0
TO II5V TO TO INPUT
PHONO PICKU
RT. CHAN.
MOTOR
SPEAKER
2 VOLUME B
SI ON -OFF SW. R II R2A/B
BALANCE VOLUME
FOR ACCESS TO CHASSIS MOUNTING SCREWS
REMOVE RECORD CHANGER MOUNTING BOARD.
TO J1
RI1
BALANCE VI- A V2
12AX7
AMPL.
5005
OUTPUT
LEFT Q4.
SPKR.
BLU TI ELK J2 4" PM.
83 V. 7 122V
CG 300.1:
R3 R2 -A .047
PCP
10.
I.5 1.5 MEG 2.5
wt
VOL
.05 V. RED GRN
MEG.
CONT 3 R8
1111
R6 220 K R12
R11
3300 500 K 82
BAL.
RIO CO NT. 411A IYEL
RI 3 tmmmot
I MEG.
25 MF 220 K C 8 -C
30 MF.
1.1.4% rn.c, 8 RIGHT CH.
RE R2 -B T2
COMM 1.5 MEG SPKR.
KM, 0911
2-5 RED GRN
MEG. VOL C2 6
CO NT .047 C7
Removal of Stylus Assembly maim 047 300 F.'M.
V3 122 v
83 BLU
V.
5005
j
IN SOME CHASSIS VI-B R13 F514
OUTPUT 2200 3
BLK RI 15 220K 12AX7 136 V.
WHTJ BRED
AMPL. GEN RED
-CE -B -CS -A CR1
C9 VI V2 T50 ME T80 MF. RECT.
R 15
LEFT Q RIGHT 047 33- 49 53 BLK
CHAN. CHAN 43 4
CHASSIS,47
CAPACITANCE VALUES LESS THAN 1 IN )4E. ==t COMMO N
AND ABOVE IN MME. UNLESS OTHERWISE GND. WIRING I -B)
INDICATED. MOTOR ISOLATED
FR. CHA55 I 5
RESISTANCE VALUES IN OHMS. (-I 15v. 60 n.
K = 1000 ono \,..1 SUPPLY
Si
136
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Sears, Roebuck & Co. Models 9021, 9022, 9023, 9023.5, Chassis 528.53300,
Models 9019, 9020, Chassis 528.53310, are alike electrically less appl. outlet.
VI V2 V3 V4
128E6 128A6 12AV6 50 C5
MIXER,OSC. LE MAP DET., 1ST AUDIO AMP AUDIO OUTPUT
T2
I.F. OUTPUT TRANS.
/00 //0
L2
OSCILLATOR COIL
BOTTOM VIEW 1 g 1
ANTENNA 100
T7
006 AUDIO OUTPUT
TRANS.
R7
RC I 5,?
r 12
2 I I-0 311E
005 .1.7130V11 470K SPEAKER
10 MEG 470
T M250
Mr
.007 TOTAL
2.2 MEG 2OMMF
-C2 20 -J
1047 I MF
V5
/00 V
NOTES: 35W4
RECTIFIER
I. VALUES OF CAPACITORS IN MED, UNLESS OTHERWISE NOTED. OFF/ON SWITCH
2. ALL RESISTORS I/2 WATT, UNLESS OTHERWISE NOTED. ON
I2AV6 128E6 128A6 5005 39/14 OHO
CLOCK TIMER
3 VOLTAGE MEASURED FROM POINT INDICATED TO GROUND
WITH 20,000 OHM/VOLT METER ON 117V. A.G. LINE.
A.C. INTER OCK
00
4 R MEASURED WITH ELECTRONIC VOLT METER. ITV BOTTOM VIEW
AC.
GOn., III OF
TUBE SOCKETS
APPLIANCE
NOTE OUTLET ONE TURN AROUND
- DRUM SHOWN DRUM TO FINISH
WITH GANG FULLY
CLOSED
21/2 TURNS
I. F. 455 KC.
AROUND TUNING SHAFT
START;
3/4 TURN
AROUND DRUM
STATION
SELECTOR
Sears, Roebuck & Co. Models 9214, 9215, 9217A, 9218A, Chassis 528.53350
IRS1 1.1 4
VI V2 V3 V4
40010 0,1,1 4.00
ALIGNMENT
rforeol
40.111100
Orialr11
002 la
PROCEDURE a --
Output meter reading to indicate
0.05 watt across voice coil 001
04 v. OSC CO/.
41
3
Generator ground lead con-
nected to chassis .
Generator modulation . . .
. . 30%, 400 cycles C4
Position of volume control . .
fully on.
Position of dial with tuner ful- Yror
ly closed 110ccOm vew
OCC Co-, IL 2
Dial should be fully counter-
zlockwise. Pointer should be
at 550 Kc mark on dial.
Adjustments
Position (in order Max. Microvolts
of Generator Generator shown) Input to produce .05
Tuner Freq. Connection For Max. Output w. output vAcklIf OF Ccprc0S oft 100 01.11111 0,14.10C 140,10
1 FP 1011 .1 00,04, IvocC. 01,40 C0,110.
SIA WO 11 HT C,OC
Min. Cap. 455 Kc Pin #6 of T2 (top and 5000
1U4 I. F. Amp. bottom)
Min. Cap. 455 Kc Pin #6 of T1 (top and 250
1R5 Cony. bottom)
Min. Cap. 1625 Kc Stator ant. C2B (T)
tuner
1400 Kc 1400 Kc Hazeltine C2A (T) 900 uv/m
Test Loop
STATION
600 Kc 600 Kc Hazeltine L2 900 uv/m
SELECTOR
Test Loop
(Rock variable condenser back and forth through the signal while adjusting core in oscillator coil, L2).
137
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Sears, Roebuck & Co. Model 9222, Chassis 528.53400
TRI TR2 TR3 TR4 TR5
25212 171.' ar_yv-, 2536
2.113 ir Z5515 25306 if COS 1253
CONVERTER !ST IF ND I F
DRIVER 41101u 0101INT
COLLECTOR :NT FE TRA.
41010.0A11.T.FFIr
.83
CRITTER
iTX
I oof 'V71* CI
ST. SOC., SONNIF ISA FOTAL
SOTTON VIER.
O. RCS
Y'x
ILD
CNN NO 3111,NNI vOLT.
FUCKS Of ...Ca°. IN FOIE. ONCE. OTNEIMISE NOM WITI STATIC*
ALL RESiSTORS .1, sssss OTNERNISE NOTES .1 T.ED IN... VOLT.
LEFT TO NINT FAO. SE EEEEE SIM Rv
FIEC
TR Se T. WET N.11 MATCNED CRARACTEINSTKS
ISEE NOTE El C IS Cif
s.
OFR/011
IIT111117.
1
T M gt 171
*Some models were produced using two type 2N214 output transistors in place of
1-3R0
type 1253 transistors when replacing Output transistors, replace with two type
I
TR3
2N5l5 T2 TI 1253 transistors or two type 2N214 transistors. DO NOT USE ONE TRANSISTOR
2ND
IF OF EACH TYPE.
TR 010
o0
26306 DRIVE
TRANS On some models C6 is
R4
33mmfd. TUNING RI
C4
TR5
SYL 1253
2N516
IIW 3 CONDENSER R2
A51
0
11111111
C15
I. F. 455 KC. Clap
2N292
LI
A61
Sears, Roebuck & Co.
Models 9202 and 9203, Chassis 132.45100,
Models 9202A, 9203A, Chassis 132.45102 are G9
almost the same. VOLUME
RIO R13 RI4
CONTROL 2N169
R4
3300 IN 295 25321
9 VOLTS
R5
R6 R9
100K 2700 RI4
RI 22K. IR01003
51
47K 2 TI 4 C6.r__.
C4 7 9V
330_ ao E _ J_ I T2 8.2 V 8.35V
02 .02
TRI 68Z TR3 CIO
2NI68A
l.i)(10
2
L2
TR 2
2N292
/3 T
2N169
2 3
TR4
2N32I /1ci4 +
-80
1 80-
.01
C3 5
IRMO;
40 3
qr
T3e
1.0V ILO
0.9V / 0.8 V
0.7V 1N295
III R2 I .1 V 0.3V 9 VOLT
8200 C8 C 11 T ,7Cl2 BATTERY
R3 CIA C5 0.1 V 65 CATALOG
1500 10 02 D2 ,Rf N2.64113
ICI B
R7
330 02 02
LTJ
RIO
RII
2700
COD
R
R15
A7
3 300
39 SCHEMATIC DIAGRAM FOR
CHASSIS 132.45100
ALIGNMENT PROCEDURE COLLECTOR 13A(SE EMITTER
I( A- RI2
Position Frequency Generator Trimmer Adj. C9 1.01,f 2200 RESISTANCE VALUES ARE IN OHMS; K 1000
of of Output in order shown 4 EXTERNAL CONNECTIONS TO PRINTED
Tuning Generator Connection for Max, Output TRI - TR2-TR3
CIRCUIT
Condenser 2 COLLECTOR CAFAC1TANCE VALUES LESS THAN 1.0 ORE IN
MICROFARADS (Af I, AND VALUES GREATER
Open 455 KC COB Al (Top of T3) THAN 1.0 ARE IN MICRO - MI CROFAR ADS (µµf)
A2 (Top of TZ) EXCEPT WHERE NOTED.
A3 (Top of T1) VOLTAGE READINGS TO COMMON GROUND ARE
Open 1670 Kc Test 1.,op A4 MEASURED WITH VACUUM TUBE VOLTMETER
1400 Kc 5 4
1400 Kc Test Loop A6 EMITTER 3 UNDER NO SIGNAL CONDITIONS WITH TUNING
600 Kc 600 Kc Test Loop Check Point I.F. TRANSFORMER BASE
CAPACITOR CLOSED AND VOLUME CONTROL
TRANSISTOR L2 AT MAXIMUM CLOCKWISE ROTATION
TR 4
BOTTOM VIEW S
138
IP P) 02
B BASE
C COLLECTOR
E. EMITTER
IN.P.N) 01,03,
04,05,06,07.
TERMINAL /ND WOWS OF
LI, T2, Ti, T4, and T5.
*II 4V
Voltages taken with receiver Resistance values taken with E6 0 0
tuned to strong local station. components in the circuit. 6)o 2
02 All capacitors in microfarads 0 0
SYL 1583 6 4V
4 1/4
3
OVERLOAD unless otherwise specified.
LI, T3, T3, T4
4 6T5 5
9.4V 350 IF
01 03 2ND IF 04 05 06
2N1944 2N233A 2N233A 2N306 2NI059 -I
CONVERTER IF AMP IF AMP 6 AUDIO DRIVER AF OUTPUT AMP * 50
V 1 015
5.4 3 45580
ce
1005
CI9
IV
ov
IV
CI -.2V
/ 812
RIO MIS
611 $ VOLUME
R5 -E x
22 --013.22
-r 2.58 T5
C II C12 159
84-10011
MMFD II ono
NIFFI
05 - 01
85-4.18
SC
G3 I(
05
/ C1T
ICS- 50 MFD 07 9V
V 3V 2N1059 -1
R13 -I8 AF OUTPUT AMP
RI6 6K
RI -4.715 6-1* CT
C6 25 MED CIO I C14- 05
.05 I 'V 05 I R41
I
.5 SK
lr"I 2.28
9V I.5V
R17-10015
C 209 $
C 20A
0 FD BO WO-
10V
..74-1111(71.-11
19**T49
4
50 'ED SWI CM/ OFF
PART OF VOLUME CONTROL
01 ST IF Q3 04
2ND 3RD IF Q5 Q6
2N2e 2N94 2N94 2N35
CONVERTER 1ST IF AMP 2N214
2ND IF AMP T4 AF AMP AF OUTPUT
82V 3 455 KC 3 455 4C R2I
SO 1 VOLUME Ci
5 DETECTOR 2K
G'V"
TI ""
ANTENNA 8 B
17° 0
3
00.11,
007v #04V
E 00.811 E ry
GIO - 05 CIS -.0S C 6 OS
G5
u-
.OS ' G9 RIO
C23
4 Ri II MOO 3 C,M..) R24 MFD
4700 sv non
86 -0- G14 3V
3.94L 819 -15011
_JT 3.96 18 AIMED 05
R5 G21
, .1-``2 3.96 RI6 140
912.8.2K T6
.01 1.02
\,. \,
R3- IK
frl
R20-276 JI C))1
I R27.100
G19
R23
0
R17 R22 2.2 K
56MyED IS K
2NI93
OSCILLATOR 04.8V 2
(
R13 T54 Q7
150 K 1118 2N214
=50 MFD AF OUTPUT
31 10 V RIO OV
SW I
NPN TYPE 9 100f1
B ON/OFF/AUTO
TRANSISTORS R4 IK 2 2K R i4 371
( +0,
C12 22 K
.05 CLOCK)/ O
7410 ..-1- 6 C. SIZE G24 R25 >
T BATTERIES - 50 MFD 4 3K
DE I 10 V G rit
GT- .05 C8-05 RIO
E EMITTER 10 K
8 BASE OSCILLATOR "SI ZE to+
H401
CLOCK MOTOR R26 R28 tit
C COLLECTOR RII - 4.711 150 11
15071
4
TDBATTERY1.5011 7rF
G 13
390 MMED Set Q6
I (A
1118 2N2I4 4
47 n AF OUTPUT Ct - 50 MFD- i0V
0 CD
- T 6 -..-.4 SLACK
I. .k:r- C7)
LI T2 INDEX NOTCH
1
oaI I rl
6o 0 60 o I 6 O 0 RIO R27
.I.C25 10 -1 U,
00 2 002 O0 106,
Lis
150-T5
753411
77. 5 r _ 6
4 o 4o 0 3 4 O O. 3 4 15 2 - -C" SIZE rn ro
iii,.
6
all
4 714
.111
j, iCat
2N2I4
7 BATTERIES
COLOR D OT INDEX NOTCH 73 5 T4 T5 A 76 AC OUTPUT
C 13 QE SW I
-TERMINAL END VIEW OF COILS AND TRANSFORMERS - + C18- MFD.IOV
390 MM'D I
25193 I )-ON/OFF/AUTO
R2- 16 rn(l)
OSCILLATOR TON CLOCK
+.A4.
,CE - .09
- RESISTANCE CHART - 4 TR9- 2.26 I RED
R8 pi,. :is 18 loon
LI T2 TS 74 75 76
- I
R .06 11*
3
BETWEEN RES 11 BETWEEN RES II BETWEEN RES II BETWEEN RES II BETWEEN RES (BETWEEN RES 11 3. CLOG i
LC4-
1
152 7 66 .5 1116 5 186 60 7: M.T.
i 2 200 122 11
C5 4:
155 6 284 25 253 2.5 265 i 4125 160 465 20 .05 1
.1c3.1 -T
1
11t 4 7 2114 2.5 .5
ClC7116i I les "0" SIZE
1
254 466 100 466 10 .OS CIE .05 4 15011 BATTERY
_, L
7 I
I.6 564 5 584 2 566 60 586 10 DI i OSE
119 MMFD
J
1+1 02
Ol R12-1125
SCHEMATIC NOTES: 017.28 35
25212 cT.C9-IIMMPO 2 535
CONVERTER
413 Q4 AF AMP
VOLTAGES MEASURED TO NEGATIVE "B" USING SYLVANIA "POLYMETER" 2N94 2N94
1ST IF Amp 212NDiF AMP R15 41CIEl
BATTERY VOLTAGE WITH RECEIVER OPERATING 9V. RECEIVER TUNED r. --T
OV
T R64
TO LOCAL STATION. 1S II 220 n
RS I WISISCIK 821 +1 CEO
COIL AND TRANSFORMER RESISTANCES ARE AVERAGE VALUES AND ARE 3.96 26 3MF0
VOLUME 6V
14 AI
TAKEN WITH COMPONENTS CONNECTED IN CIRCUIT. 12E3
ItI4 2 28
4+ +AA.
-- DESIGNATES NEGATIVE "B". 820.279
"K
R3-IK
fArl
CI9 MEI/ - Av C23- 40 MFD- 3v
II 24Tl
ANT.
Heavy shaded areas indicate bottom foil.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
OWI
SYLVANIA Chassis 1-635-1, Model 4703, Material continued on next two pages.
LOUDNESS AM /FM TUNING SELECTOR
RECORD COMP TONE
mil Ai
WgMirlIM7
M _
MO
i Ein
FM OSC
TRIMMER En Em
FM
IF
13AM
AMP in FM IF AMP
AM DET En 0 0
r---- --
ino--, V3
AM IF FM IF FM IF RATIO
V4
,
INPUT
0
INPUT
6BA6 OUTPUT
6AU6 MT
INVERTER TS
AM IF
i I ll TRIMMER N ED o 0
V2 FM POWER TRANSFORMER
OUTPUT V5
6U8 OSC / MOE
6AL5 I2AXT
I
1
I
_
! ED12.. N...
N.,
II il=
C39 (A,S,C, Di FM OCT.
I
L J
i 7
VI ,.,....
Ir. RF AMP TT
0 0
6086A
0 OUTPUT
FORMER
AUDIO
OUTPUT
V6 AM
VT
V9
6BE6 fou'IEs AUDIO . .A
....-w-V*
5U4GS
AM ANT OUTPUT ./ EL84/
6805
6803
as
i a
RECTIFIER
d5 exI, FM ANT
SYLVANIA Chassis 1-616-2, Model 3406, Alignment (Continued)
located left edge of board, (1) located
CHASSIS REMOVAL center of board and (1) located lower
right corner of board. Remove chassis
1. Remove volume and tuning knobs by pul- from case. (Speaker and clock lead
ling straight out. lengths permit removal of chassis from
2. Unsnap buttons securing back flap, case without unsoldering. If necessary lift
flap and remove large battery case as to remove chassis from case completely,
far as leads permit. identify all leads, unsolder speaker
3. Remove four (4) nuts and insulating leads at speaker, clock leads at ter -
washers securing chassis to case, (2) minals on chassis.
ALIGNMENT PROCEDURE
TEST EQUIPMENT HOOKUP ADJUST FOR MAXIMUM VOLUME
ALIGNMENT SETUP NOTES
SIGNAL GENERATOR radiate In order shown T4, T3, T2.
1. Set variable tuning ca- -
pacitor plates fully open signal to receiver through a
loop consisting of several Repeat for optimum perfor-
(minimum capacity). mance.
turns of wire in series with
a 150 Ohm resistor. Set gen-
erator frequency at 455 KC.
Set dial to approximately SIGNAL GENERATOR radiated - C4 (oscillator t r'immer)
2.
1650 KC. to receiver as in step 1.
Set generator frequency at
1650 KC.
Set dial to a frequency SIGNAL GENERATOR radiated - C2 (antenna trimmer)
3.
between 1400 KC and to receiver as in step 1.
1500 KC. Set generator to a frequency
corresponding to receiver
dial (until signal is heard)
through receiver speaker.)
to 600 KC. SIGNAL GENERATOR radiated Ll (oscillator coil) while
4. Set dial -
simul taneou sly rocking.
to receiver as in step 1.
Set generator to 600 KC and tuning capacitor through the
tune for maximum volume. 600 KC position.
141
VI V2
6CB6 V3 V4 V5
6U8 6BA6 6AU6
FM RF AMP .Zev FM MIXER a osc 6AL5
FM a AM IF AMP FM IF AMP FM DET.
a AM DET
R 12 C21 l'501,
33K 01 .01.40
1)0 V . 7101, 4. OV
75 R3I
Rai 15K
TI
100K Sli 4
C6 C7 R7 ftf7V
33 MMFD 47 FM -IF 41V
1011 OV
6 (--
C20
01
C37
RIM 4 MFD
10K 50 V
I7 7
-17V11
R8 2 4 R26
L3 1511 027 680 #32
C30 470K
2ND FM RF '01
L8 C 22
R 17 :
47 MMFD iR5627
( 470(3
CI R21 C3i
,---- TS DET
470 MMFD Im 82K R33
frOV 5 1.1.1q10 470K
C13 5 -
012 3 4- AM -IF R29
C2 ST FM RF TO MMFD _L -11C23 AM -IF
R14 01 I -- 680
2 7'
IlV 22K C34-._
MMFD. I= MI Si 2 .01
F J
G32
SW NO tEc!,9
1' CI6 NO 624 1100 MMFD C35
IT R30
470 MM OI ISO MMFD
i%T° R22 68K
FM ANT C15 RI5 3.9 X
= 4 7K
2 C
L2/ AM LOOP V6 -
ANT
6BE6 AM j_C26 31
Fla =En RI9
AM MIXER = 100K
01 r" RIO 1/2 SW I P+40110
*MEG 22 4 3
a osc. PH 25
(FRONT) 100 K
MEG - #34
C25 SW I
25 MMFD 15 W - IVF2ROSNT AM 220K
823 (REAR)
L6 2.2 MEG
C3 IR
000 C2 1 C3 1 054
MEI CE1 C19 R38 012 1.047 V9 -... 820 R35
10 MMFD 2 MEG 390K ximFD
TONE
EL84/6BQ5 C49 2 MEG
AM OSC 044 IR24 AUDIO OUTPUT .01 RECORD COMP
.002
C53
T1 T2 TO T5 t70 V C50
35 c3,3, 1.001
.01 CANNEL 1
2o 2 ICC 470V II
L_ L5
o 36
r. 06
64
5 3Cv I -IMM47ED
.02
C6
= TO PIN
OF 12AX7
4 \ .02 R57
T3 611
-COLOR DOT I MEG 051 82K
R51
Sw 2 TERMINAL END VIEW L000NESS 220K .0033
ON/OFF/REJ IV 854
PART OF 1139 114- 77
CHANGER 8.2K 42 45011
SF AC MEG
843
220K TO R57 R48
ye ON T7 120K
PHOMO II I2AX7 C55
PHASE INVERTER TO PIN
MOTOR II R49 8 OF 'SoD
470
4R7K 4700 5(145 NP
1490VAC 3
IV
AUDIO
R50 OUTPUT
R44 120k
AC POWER ON/OFF 220K
PLUG PART OF
= 336 7
LOUDNESS CONT 6 652
2W a.E390 IOOV 220K PL I
T6
,291
350V 550V
- 25 4540V
-350V R56 CM AN
POWER V7 1146 C47
TRANS TO CENTER 10011
TAP OF 77 220K 02
5114G NV
- L5. T1, TP, 13, 14, 15 RESISTANCE CHART - VIO
RECTIFIER EL84/6805
L5 T18 T2 T3 T4 a 15
3 4 ,1 AUDIO OUTPUT
BETWEEN Rut BETWEEN YES BETWEEN En BETWEEN RES.
Tam. n TYPE 47 o
TERM. A Mai. A TERM. n 6-.) R 45
i 2 7.5 I I .5 8a2 .6 ill I 10 PILOT LAMPS \-1-1 5.611
I 4 VI
1 3 31 .5 564 I.6 35 20
. V2 4 V3 4 V4 3 V5 4V6 V8 5 v9
CHASSIS: I -635- (Additional service material
SYLVANIA on pages 143 and 141)
MODELS: 4703 SERIES
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
SYLVANIA Chassis 1-635-1, Model 4703, Alignment, Continued
AM ALIGNMENT
STEP SETUP NOTES TEST EQUIPMENT HOOKUP ADJUST FOR MAXIMUM
1. SELECTOR SWITCH SIGNAL GENERATOR 'HOT" LEAD THROUGH A .1 MFD CAPACITOR TO
-
T5 - BOTTOM CORE
IN AM POSITION PIN 7 OF V6. GROUND LEAD TO CHASSIS. SET GENERATOR TO 15 - Tor CORE
455 KC. T4 - BOTTOM CORE
VARIABLE TUNING T4 - Tor CORE
CAPACITOR FULLY
OPEN AC VOLTMETER - ACROSS AUDIO OUTPUT TRANSFORMER.
SIGNAL GENERATOR "HOT" LEAD THROUGH A .1 MFD CAPACITOR TO C17 - AM OSC. TRIMMER
2. SELECTOR SWITCH -
IN AM POSITION PIN 7 OF V6. GROUND LEAD TO CHASSIS. SET GENERATOR TO 1620
VARIABLE TUNING KC.
CAPACITOR AT
AC VOLTMETER - ACROSS AUDIO OUTPUT TRANSFORMER
1620 KC
3. SELECTOR SWITCH SIGNAL GENERATOR "HOT" LEAD THROUGH A .1 MFD CAPACITOR TO
-
LS - AM OSC. COIL
IN AM POSITION PIN 7 OF V6. GROUND LEAD TO CHASSIS. SET GENERATOR TO 535
KC.
VARIABLE TUNING
CAPACITOR AT AC VOLTMETER - ACROSS AUDIO OUTPUT TRANSFORMER.
535KC
SIGNAL GENERATOR RADIATE SIGNAL TO RECEIVER THROUGH A LOOP C14 AM ANTENNA
4. SELECTOR SWITCH -
OF SEVERAL TURNS OF WIRE. SET GENERATOR TO 1400 KC. TRIMMER (LOCATED
IN AM POSITION
VARIABLE TUNING AC VOLTMETER ACROSS AUDIO OUTPUT TRANSFORMER.
-
ON LOOP ANTENNA)
CAPACITOR AT
1400 KC
FM ALIGNMENT
STEP SETUP NOTES TEST EQUIPMENT HOOKUP ADJUST FOR MAXIMUM
I. SELECTOR SWITCH SIGNAL GENERATOR "HOT" LEAD TO TUBE SHIELD V2 WHICH HAS
-
13 - BOTTOM CORE
IN FM POSITION BEEN DISCONNECTED FROM CHASSIS. GROUND LEAD TO CHASSIS. SET T2 - BOTTOM CORE
GENERATOR TO 10.7 MC T2 - TOP CORE
VARIABLE TUNING TI - BOTTOM CORE
CAPACITOR FULLY AC VOLTMETER - DC PROBE TO POINT "A". GROUND LEAD TO CHASSIS. TI - TOP CORE
OPEN
T3 TOP CORE
2. SAME AS STEP I SIGNAL GENERATOR - SAME AS STEP 1. -
AC VOLTMETER Acnoss POINTS "A" AND "B"
-
ADJUST FOR ZERO
METER READING.
3. SELECTOR SWITCH SIGNAL GENERATOR "HOT" LEAD THROUGH A 300 OHM RESISTOR TO
- CII - FM OSC. TRIMMER
IN FM POSITION FM ANTENNA TERMINAL. GROUND LEAD TO CHASSIS. SET GENERATOR
To 108.4 MC.
VARIABLE TUNING
CAPACITOR AT AC VOLTMETER . ACROSS AUDIO OUTPUT TRANSFORMER.
108.4 MC
4. SELECTOR SWITCH SIGNAL GENERATOR - "HOT" LEAD THROUGH A 300 OHM RESISTOR TO FM L4 - FM OSC. COIL
IN FM POSITION ANTENNA TERMINAL. GROUND LEAD TO CHASSIS SET GENERATOR TO
87.6 MC.
VARIABLE TUNING AC VOLTMETER SAME AS STEP 3.
-
SPREAD OR COMPRESS
CAPACITOR AT LOOPS ON COIL.
87.6 MC
S. SELECTOR SWITCH SIGNAL GENERATOR - "HOT" LEAD THROUGH 300 OHM RESISTOR TO FM C8 - FM RF TRIMMER
IN FM POSITION ANTENNA TERMINAL. GROUND LEAD TO CHASSIS. SET GENERATOR TO
VARIABLE TUNING 104 MC.
CAPACITOR AT AC VOLTMETER - SAME AS STEP 3.
104 MC
6. SELECTOR SWITCH SIGNAL GENERATOR - "HOT" LEAD THROUGH A 300 OHM RESISTOR TO FM L7 - 1sT FM RF
IN FM POSITION ANTENNA TERMINAL. GROUND LEAD TO CHASSIS. SET GENERATOR TO COIL
VARIABLE TUNING 96 MC.
CAPACITOR AT SPREAD OR COMPRESS
98 MC AC VOLTMETER - SAME AS STEP 3. LOOPS ON COIL.
SELECTOR SWITCH "HOT" LEAD THROUGH A 300 OHM RESISTOR To FM L3 2ND FM RF
7. SIGNAL GENERATOR -
-
IN FM POSITION ANTENNA TERMINAL. GROUND LEAD TO CHASSIS. SET GENERATOR TO COIL
90 MC.
VARIABLE TUNING SPREAD OR COMPRESS
AT 90 MC AC VOLTMETER - SAME AS STEP 3. LOOPS ON COIL.
143
01 . CODE 01 Q2 CODE 01 Q3 Q4 Q5
214374 2W373 SYL 1583
CODE 00 USED SYL 251 CODE 00 USED SYL 1250 R6
SYL 1396 - S WO SYL 1329
CONVERTE IF AMP DETECTOR 1500 AUDIO DRIVER " AUDIO OUTPUT
OV OV VV.S. 42.1V 0. +5.2V
5.20 ICM
+5V 7, 1
=
C II +0.13+ 14
6/m410 3 RFD
%MOO 6V
5.2V
S +5.2V S 15.2V +5.2V 1.0V + 030
+5V 3 5V II
CODE 01
RI RI
R3-1 CIO C12-50 MED 2700 016 -100 RFD
3.9 X 02 6V I3V
NO" I(
CODE 00 C9-3MWD
USED 6.22
R4 - 2700 C6-.22
CI7 -.03 RS 3
cs/
L
22-331,
000, 254FD
RI -1
rr 2.72 CODE 00 SII I
For notes USED 3.30 ON/OFF SWITCH
PART OF
RIO - 0200 VOLUME CONTROL
see page
145. CI3A 0138
T 50 MFD 03 MED
IAV
00000000 0020] NV I
R1.1
2.70 6 6.11ASI
C COLLECTOR 6 VOLTS
E EMITTER
S SHIELD
1BLACX
01 & Q2 93,04 & Q5
6V
P -N -P P -N -P N -P -N
;NS- deR0q-I
02
. 25373
IF AMP 91 & Q2 Q3 914 & 95
LI T2 T3 T4
R4
2700 3 O 0 4 3 O 0 5 O 0
O 00 00
O 0 0 O 0
TERMINAL END VIEWS OF LI ,T2 13 & T4
SLAG
AUDIO DRIVER
R7 SYLVANIA
VOLUM
2 51C
7=7' 6 VOLTS
521 Chassis 1-637-1
3 I/2" PM
RED T Models 5P10, 5P11
SW 1
ON / OFF
PART OF
VOLUME CONTROL TOP VIEW - PRINTED BOARD ASSEMBLY
2N233A 05 06
01 02 IF AMP 03
2NI94A 2N233A 2N306 2N1059
R1331. IF AMP AF DRIVER AF OUTPUT AMP
CONVERTER O
T6
t TS, T
3- 1WWIE
2.22.311M
R 3
Nn -SIN
R1T - 4 TN
0V
IR
Fili 2 TR
2v
Q4
C15- 05 S Y L 1583 07
c DETECTOR 2NI059 ssr
v AF OUTPUT AMP oworr/ssnrco
PART OF
.25,0on vO.USt C011,1101.
01.02.03,05,06A7
1N, NPR
SCHEMATIC NOTES Ig°1:20 SO MFO
6v 67 IS
VOLTAGES TAKEN WITH RECEIVER TUNED TO STRONG LOCAL STATION. B 0
I. DLACILI
2. BATTERY VOLTAGE WITH RECEIVER OPERATING 6V. 0
O 0 11.65E VIEW Of
NOTED - C ALTERNATES FOR
3. VOLTAGES SHOWN ARE AVERAGE READINGS, VARIATIONS MAY BE SAGE 06 WOO 07
- COLLECTOR
DUE TO NORMAL PRODUCTION TOLERANCES. C
- EMITTER BASE VIEW
TRANSISTOR
4. RESISTANCE VALUES TAKEN WITH COMPONENTS IN THE CIRCUIT.
RESISTANCE CHART
5. ALL CAPACITORS IN MICROFARADS UNLESS OTHERWISE SPECIFIED. T4 T5 T
Li T2 13 4
6. -L -DESIGNATES CHASSIS GROUND. BETWEEN RES A BETWEEN RES A BETWEEN RES A BETWEEN RES El 'EYRIE. RES A NETWIEN RES A
1r
1
I 3 1
1 1 5 i 4 5 3 E.S I 300 i 5 5
4 2tte, 2 1 6I 2.6 I 2.5 I 6 I.S 4 5 250 5 7
OWN 2 2.5 2.5 265 I.5 6 IRS 56 3.5
S 5 El 1
3 5 3 5 3 566 IRS 56 3.5
_
61"Ari awls
liVr
krel trw
CHASSIS REMOVAL
06
7P12 SERIES:
2NI059
2s -a---- ,AF OUTPUT 1. Using a coin or screwdriver, loosen
R9 -9, AMP
'co
the one (1) screw which secures the
II1URFD "4.4F1.1',7"4_1 RC -22K backcover to the front of the case.
FT 7-7,1 QS Remove cover as far as speaker leads
6151 64% 39K
1-#;! C,6
permit.
Q4 .006 2. Remove screw securing tuning knob and
LI:-
nN7
1-2.64M9 r7.471(
y remove knob.
crr
Til 3. Remove the three (3) screws securing
3MFD
6V 6V chassis to case, two at bottom of
-
6V BATTERY 3112 -PM
chassis and one near tuning capacitor.
/OFF\
T OF
CONTROL 4. To replace chassis, reverse the above
procedure.
TOP VIEW - PRINTED BOARD ASSEMBLY
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
V' R-710 E R Model 6 5 2 1
128E6 12BA6 R-10
SOCS C -IT
PART NO. DESCRIPTION
R- 4 R- 14711 INSULATED RESISTOR I/2W 20%
IR-45 R- 2 226 CARBON RESISTOR 1/2W 109.
1R-20 R- 3220K INSULATED RESISTOR I/2W 20%
L-2 IR-23 R 4 3.3MEG.CARBON RESISTOR I/2W 20%
IR-111 R. S 4706 CARBON RESISTOR I/ 2W 10%
1111,55 R- 6 12011 CARBON RESISTOR I/ 2W 10%
IR-127 R- 7 6806 CARBON RESISTOR I/2W 10%
C- R-5 IR- I3 R- 8 2.2%1E0.CA/030N RESISTOR I/2W 20%
Ao-,\AA-4-0,4 IN -/00 R- 9 566 CARBON RESISTOR 1/2W 10%
CHASSIS GROUND IR- S R-10 02011 CARBON RESISTOR 1/2V1 10%
C-3 6R-42 R -I1 16 CARBON RESISTOR I W IO%
P
WI:BETWEEN POINTS MARKED WITH _C-2 IR-12 R -I2 MEGI. INSULATED RESISTOR li2W 20%
USE DASHED LINE WITH RONETTE 3 VC -67 R -I3 1MEG. TONE CONTROL
TO -284-0V CARTRIDGE, -5 VC -2 R-14 I MEG. VOLUME CONTROL
USE SOLID LINE NETWORK WITH C- 35W4 SOCS 126A6 1213E6 12A06 CC- 12 C- I
135R-Ful - Fl ICBM CARTRIDGE. 47 MMFD 5000 10% CER CONO.
CC- 76 C- 2 470 AWED 500V 10% CER.COND.
SWITCH IN RADIO 117 V 60 CYCLE A.C. CC- 44 C- 3 220 P/MFD 500v 10% CER.COND
POSITION CURRENT ONLY PC- 8 C- 4 .1 MFD 4000 PAPER TUB.COND.
iJ
ALIGNMENT POWER CONSUMPTION 50 WATTS.
PC-
PC- S
CC- S
2 C- 5
C- 6
C- 7
.05 MFD 200V PAPER COND.
05 MFD 400V20%PAPER TUB. CON.
too WED 10%cERAMIC COND.
CC -37 C -B 1000 MMFD 10% CERAMIC COND.
FIRST STEP: Connect the hot lead from the generator to the ANT. section PC-
PC -21
I C-9
C-io
.01 MFD
.OSMFD
200V PAPER COND.
400V MOLDED COND.
of the gang condenser through a .1 MFD. condenser. The ground lead CC -35
CC -36
C -II
C -Q
4700mmro 10% CERAMIC COND.
3300MMFD 10% CERAMIC COND.
from the generator must be connected to "B" minus under the chassis. PC- 7 C -IS .01 MFD 400V 20%PAPER TUB.GON
Turn the gang condenser to complete minimum capacity. Set the gen- EC -I I
PC -I9
C-14
C-17
IOMFD 70V QC ELECTROLYTIC
2MFD 50V PAPER CONDENSER
erator to 455 KC. Adjust the movable iron cores in the IF cans. The IF EC -66-L C -IS
C-16 ::117F:] -150V ELECTROLYTIC
adjustments are made in the top and in the bottom of the cans. Adjust L -19 T-
T- 2
1
I.F. TRANSFORMER
the cores until a maximum reading is noted on the output meter. AT -27 T.3 OUTPUT TRANSFORMER
LL -51 L- I ANTENNA ROD
LO -27 L- 2 OSCILLATOR COIL
SECOND STEP: With the leads from the generator still connected as in IF 5-1 SWITCH ON TONE CONTROL
alignment, adjust the generator to 1610 KC. Make sure that the gang r-r-PHONO PICKUP
condenser is turned to complete minimum capacity. Adjust the generator
CHANGER MOTOR SOCKET
to 1610 KC. and adjust the oscillator trimmer of the receiver until the
signal is tuned in. Next, turn the gang condenser to complete maximum
capacity. Adjust the generator to 540 KC., then adjust the iron core in
the end of the oscillator coil until the signal is tuned in. It may be well
to recheck the 1610 KC. setting to make sure that the adjustment of the
iron core has not shifted the frequency.
THIRD STEP: Remove the generator leads from the gang condenser and
the chassis. Loosely couple the generator to the antenna by laying the hot
generator lead near the antenna rod. Set the generator at 1400 KC. and
tune in the 1400 KC. signal on the receiver. Adjust the ANT. trimmer until
a maximum signal is noted on the output meter. TUNING
3HAFT
TRAV-LER VI
128E6 TT
v2
12BA6 TS
V3
*AVG
V4
SOCS
CONK If A.41, DET-AOC-A AMR
45511C AF OuT
Models T210, T211,
ACTA CO AL AT(
r
T212, T213
CIA
Table Model Radio AV
Chassis 236 le
500A
va,.
00
V5
35W4
Pr< T
Clill
CM/
I. F. 455 KC. aTITceroC O
a oil VO*1.
146
i2BE6 12BA6 I2AV6 5005
CONVERTER ST LF DE, EL 15T AUDIO OUTPUT
T T2
90 50 V 120
1ST F TRANS. 1 2ND.I. F TRANS. 5.1.6
Z
-1
.005 O
r2+ 3
1 470 K
WHITE / BLK is 2 ED
,8 2.7 1900
7. 7 tri
C4
LI IVG17127; 4 IIIIGREEN
7-8 DOT 1.3V -1°4 j.OI
ANT DOT V 21
x
I° , TRIM. T 4.. ISO
150 WAIF
IU
cD 0
22K U)
R6
hSB
1.5K ITT
1311
L2 7. 15
ZI
0
Cl)
I
1
ffL I 1-3
2IY
CS
RIM. 21 50
7fC
CI O
wHjIl A VC
3 314 21 13 VOLuME
-I- C2
220 CONTROL
T 01 mmF 4 -
R4 35W4 Cp
RECT.
5
8- I. F. 455 KC.
Eq.?.
1255
J . CT]
el L2
I
1 0
I BROWN
I
1-14. t
/
/ BROWN
I f 5 12A06 128E6 121346 5005
C3 co
IT' .047
I
1\ 4 3 INTERLOCK 4- -4-
\:\ 2) 3 3 3 4
\ le&K
77 \\ -- BLK-1 NOTES,
// HT
ZI - 0-V\A-- CLOCK CLOCK / I ALL VOLTAGES MEASURED FROM COMMON NEGATIVE USING A vTvM AND NO SIGNAL INPUT
1i
- ANT. SWITCH L,NE VOLTAGE ,ET AT HT v At READINGS SHOULD BE AS SHOWN :0 PER CENT
1
I
t FN
-I ,..."'_,__- Vitt TRIM MOTOR'', -
IL 7 6 5 4 3 2 2 4,, CAPI1c ,ANCE vALuES IN DAFD AND RESISTANCE VALUES 171 0717A5 UNLESS
//// "1 F1,2. / i lie CLOCK MECHANISM OTHERw.sE SPEC, ,E0.
l I ' -8.5V
C
K
II t
/
/
r-, I V
0 0 ......,..
I2AV6 C) / 4 '..-.,...
......
1/4.2
I L--,
1
al
4
0 txi
1
B- T2 0 12BE6
)9____ov
/ C)
TO CLOCK SWITCH 3 BOTTOM VIEW OF L2 OSC
000(
R
zz ®i, ,
QV 701.8v R2
. 90V0,v
COIL SHOWING CONNECTIONS
TO % 13 012BA6 I 2 3
CLOCK 4
NN::), 90 i=N\
MOTOR
90V C4 '11
V0 DOT
7v, 0
4
ktiC 5 0 00 0 Bi 2 BOTTOM VIEW OF
1,3 01,72 1-F TRANS.
5005 ®
rzA
/IN 0
00
Lej90v
0 - 6
TO T3 //
Bottom view of chassis. r® 05 I
r' I25V /
Top view of chassis.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
WESTINGHOUSE Models H -697P7, H -698P7, H -699P7,
Chassis V-2393-3
Also used in Montgomery Ward Model GTM-1201A
(Continued on page 149, at right)
CHASSIS REMOVAL
To-- I
1. Remove the tuning knob as follows. Insert a loop of
string (see figure 1) under the tuning knob and pull the
knob up and out of the cabinet front.
2. Remove the back of the cabinet by loosening the two
coin -slot screws on the back.
3. Remove the two 1" long hex head screws securing the
chassis to the cabinet front.
4. Remove the printed circuit chassis, battery case, speaker
spacers, rubber grommet and speaker.
5. To insert the printed circuit chassis back into the cabinet
use the reverse procedure. The tuning knob and cabinet
back screws must be the same or identical to the original
111. dimensions to prevent possible damage to the tuning gang.
V I
cc
0
i S
La
La
0
S A
col
S
TUNING KNOB REMOVAL
INSERT STRING UNDER
TUNING KNOB & PULL UP
Figure 1 - Tuning knob removal
C'd
NEW CIRCUIT FEATURES
This receiver incorporates new circuitry not previously
used in Westinghouse radios. This is the use of a trans-
formerless audio output circuit and an improved transistor
detector circuit having amplified AGC and DC coupling to
the Audio Driver stage. These new circuits provide improved
fidelity, less distortion and more uniform operation.
2 In the transformerless audio output circuit the trnasistors
are operated in "push-pull" with each conducting for ap-
proximately 50% of each cycle. Both transistors are biased
close to cutoff, so that with no AC signal, both are effec-
tively not conducting. Out of phase audio signals are fed to
the base of each transistor from the secondaries of the audio
driver transformer (T4). Each transistor now conducts on
alternate half cycles of the incoming signal. The collector -
to -emitter AC currents of each transistor alternately flow
through the speaker voice coil.
The need for a blocking capacitor between the detector and
audio driver circuits is eliminated by locating the detector
audio load (volume control) in the detector emitter circuit.
The AGC voltage is taken from the collector load of the
transistor and therefore provides a greater range of AGC
control voltage. The detector transistor is biased at near
cutoff. The base -to -emitter circuit of the transistor thus acts
as a diode, rectifying the IF signal (detection). The ampli-
fied DC voltage, proportional to the IF signal level appears
across R13 and is used for ACC. The AGC voltage is filtered
by C11 and coupled to the base of the 1st IF amplifier
through R10.
148
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
-N WESTINGHOUSE Chassis V-2393-3,
°wN I.5V. + I.5V. Models H -697P7, H -698P7,
. ___ - CONTACT, H -699P7, Continued
-I
CLIPS
E
I + I.5V. I.5V
-.I (----CTM I
I
I
7111
------- 783V074H01
-HAT TERM HOLDER R25 S , SPACER
e
LOCATION
CONVERTER
OSC---NT.
TR,M TRIM
..-1 TI
"
0 CI
_,1
-Ia. am
-, IP% IF
=
A
dignii151-
. .1:4 inutur
ii. - _AO' - iu LE
AMP
L2
= RIP JI 0 TRIO
/R3 .- . R I
I
41- PI8
To SPEAKER r
Top view of chassis
skWa
IL%
VOICE COIL
I
C5 =-
DRIVER RI5
74
--C15 I - SPEED
NUT
u P16
-i- \ R8 POWER SUPPLY
R2L i DRIVER
R17
,,,,./R12
,_11111, R13
C14
lik
i
R7
0 T2
E ,FREACY
RAY -0 -VAC
915 or/ 1015
7LP 04 7R
R9 On SWiA 5 SWIG ..
.11
...... C::
C9 R9 C8 -MI -
BuRGESS
MALLORY
Z
MI5
R2 R20 4121 VOLUME CONTROL 7.-C12 ,
R23 4
i"4 .
R14
.
('
T3 tit c - 783V074H01
43: CI3 Ri i
DETECTOR
2,t, rI
SPACER
LOCATION
.. J AMP
- AUDIO OUTPUT
ALIGNMENT PROCEDURE
-
Loosely couple Generator Cl Adjust for maximum:
Step modulated signal to: frequency setting
I Loop LI 455KC maximum T3, T2 and T1 in order indicated for max. output: (Reduce generator
output if necessary for T2 and T1 adjustments.)
,, 1625KC minimum Oscillator trimmer "IV
2
3
t9
1400KC 1400KC RF trimmer "B"
, 600KC 600KC Oscillator coil, L2, if necessary
4
5 Repeat steps 2, 3 & 4
-il-- C2 (4) PENLIGHT CELLS
(6 JOLTS)
;253+ H4- 111..
\
i\ T1
1,
4.....1 ANT. OSC.
,/' -If's\CONVERTER
C4 \..-
,--- 1
R2
TRIM
.aLl.
TRIM
6k4 IE CI
(1)
..
n5* ---ii------ s-- ,
® L2 0
. 7eIW-47-cr".R10
R2 eN,e 131(Z)
- -
41(.7:-..RII
/E \ J1 .
..
.-
-
...
-
I st I.F. AMP
(
..,"
Bi
TO SPEAKER ....
VOICE COIL
Rif!
-
CI 1R3
RI5 tQQQQJ
C51
- I
14
L
-or
I
CII
r- -5.--, -
L
4 Iv 5.6M. a+ +
13
1 5 T2
I
1 REI
CI4
RI3
i ,o.0
g
_et
SW1 9
RI6i
/-C'
LCI5
DRIVER I
RI9
e ..
I I 411;-\\*RI7
ti 2 ...3
L..---
.
_cre-' I 4 1 1 INE 1112 \ ' 5'........%sa (8 E ) .1442R20
R2:111'%2A2
R7 ilk\ cal. ,-a`°\ 1 .
R14 -WV-4? \ ;
cir,c1 1,E C.) IC E' E!
\IL3 _4__2
- ,
I I i '',
.
C131- II `, 5
`.... ..." E; l I+ --
,11
R r ---- 3
\----burEcToR
M.
AUDIO OUTPUT
Bottom view of printed circuit chassis with components shown as electrical symbols (MATCHED PAIR)
149
CONVERTER 1st. I. E AMP. 2nd. 1. F AMP. RI6
DETECTOR AUDIO DRIVER 2.28 AUDIO OUTPUT
MATCHED PAIR
L2 TI C4 T2 T3
C8 T4
05C COIL Isl. I.F. TRANS. 8.2 2nd I.F. TRANS. 1E1 DRIVER TRANS
3rd. I. F. TRANS.
- 5.5V 06 75
5 -5.5 5v
0.9 yi -.5V 8295 C19 -5.5v
4 C RIO 8IF
T 2,, -II 4 3 --- XI
1.54 470 I
15R 21 =1,-
B
6 H(3V
i
5. Tal
3 :r, 1I
02
C5 .35V -.55V ,
)1----.C.* . ,
TRIM. in -4--1, Ci2 45.
R2 .01
( ,0 VCo
II .0,
2.28 C5
.01
85
C7
,01
.0i
C9 CIO
.01
-- , R
2.58
I
RI5
470 _L -C16
40
F
680 RI3
470 3V
813
11
6.8K
C6 R7 R12
10811P 6.88 396
3V
4.7K -,5 V
AAA
R6
R3 , 398
2218 R14
SWIA SWIG
5.5V 100
-6V
NOTES: srei I
I
I. DURING SERVICING, TOTAL BATTERY CURRENT C13 - + +
1---1111,-1
SHOULD BE METERED, WITH NO SIGNAL. AND VOLUME 10014F -
CONTROL AT MINIMUM TOTAL BATTERY DRAIN SHOULD BE APPROX. B MA. 7V * /
2. VOLTAGE MEASUREMENTS MADE WITH A VTVM FROM POINTS INDICATED TO GROUND, WITH TUNING __ I
CAPACITOR AT MAXIMUM, VOLUME CONTROL AT MINIMUM a BATTERY
SOURCE AT 6 VOLTS.
:V /mT
3VAL
3. CURRENT
ALL CAPACITORS LESS THAN ONE ARE IN MFD ALL CAPACITORS GREATER THAN ONE ARE IN MMFD t_ _ __ , MEASURED
UNLESS OTHERWISE SPECIFIED ALL RESISTORS ARE IN OHMS HERE
k, WATT.
ANY TWO AUDIO OUTPUT TRANSISTORS WITH IDENTICAL COLOR CODE ON TOP CAN BE USED AS A MATCHED PAIR.
TRANSISTOR COMPLEMENT
LI FUNCTION TYPE GI PART NO. ALTERNATES OW PART NO.
RED
DOT CONVERTER PNP 297V01801 25412
HI. I.F. AMP. PNP 297V012005 7 HCH,04,
2N4I0
2nd IF AMP PNP 297V012H06 2N4I0 tryviaF1101,04,
AUDIO DRIVER PNP 297V004NO3 281406
AUDIO OUTPUT PNP 297V003.06 M:
0 MATCHED PAIR (SEE NOTES/
AUDIO DRIVER
BOTTOM VIEW
R13 OF TRANSISTOR
R1 14 GRN
2 DOT
7 7.
RED 01 0
C2 L2
2 I
osc. COL I.F. TRANS.
(BOTTOM VIEW) Ti,T2 8 T3
(80710M VIEVE
SW1 B
R11
+_ _
I. F. 455 KC,
C3 71
4 1 ;' 2nd IF
A MP ow/0 (For alignment details follow data
4 T2 . R21
CC on page 149, preceding)
I
13 5 2
'- -CIO--
OA E- -
C7 -4W-I -°I.th
11 2i SW1A
T3 5 R20
11 )(
T lst i
C12 WESTINGHOUSE
_fi'.. -1,44 )
R5 Chassis V-2397-3, used in
1st IP A Alf C 11 vvvovb., 94.9o,nMIMIN0111101111111119,
Models H -725P6, H -726P6,
Bottom view of chossas BLACK H -727P6, and H -728P6
i2 BE6 128A6 12 Ave 5005
73
CONVERTER I.F.ST DET 6 1ST AUDIO OUTPUT CU PUT
TI 72 pry BL RANSFORMER
85v V 40V
IST LE TRANS ENO I.F. TRANS. X16
z
.005 20 RA
-7 5 1
1
;2
63 Zi
1
85V S 100 4706
MMF.
65V
6 la" len= OPEN SECONDARy
2 I 2 READS .2n
4 GREE 12V 34 ..GREEN 41 RED VOICE COIL 2.65n
TA re ANT. 3
L. DOT -J R2 Doi COMMA/10N OF
RI 150 ALL APPROX .I.n.
226
L
85V
L2 1.36 ZI
OSC.1 IW
COIL: 4 Z ABM 4708
.005
-11 .005 220 150
5:
4._ GSA -1(- 1-4H-I
,-;fc r-DOSC R4 SO MMF MMF 470
TRIM. VOL .CONTROL
2L _21543 5006 TAPPED .8M
R3 AT 20011 005 100
AVC HIP HI7
3.3M Zi C3 R5 4 MOO
-C2 220 C58
T.01 MMF .005 686
4I--; 4FL-11 2 5 6
35W4 50
CO
NOTES
01
ALL VOLTAGES MEASURED FROM COMMON NEGATIVE USING A v.T.v.m., VOLUME CONTROL AT MINIMUM, TUNING CAPACITOR AT MAXIMUM. REST
1. 1.46v
LINE VOLTAGE SET AT onc A.E.. READINGS SHOULD BE AS SHOWN! 20% 2 3
2. ALL CAPACITANCE VALUES IN UFO, AND ALl RESISTANCE VALUES IN OHMS uNLESS OTHERWISE INDICATED.
1257
VOLUME CONTRA
FRAME
I. F. 455 KC. GREEN DorAt! -4 1 3 2
C7 12476 12E1E6 121346 5003 BOTTOM viEw OF BOTTOM VIEW OF L2 OSC.
.047 COIL SNOWING CONNECTIONS
T1,72 I -F TRANS.
INTERLOCK
SWI 4 3 3 4 43 34
AC OFF ON
SWITCH
117 V
AC
OSC
TRIM Westinghouse
MODELS
Cl
A &C
H -704T5
(Chestnut Brown)
AVC
SW1 H -705T5
BOO I( C3 (Turquoise)
\ &JOAO
C4 H -706T5
TO (Ivory)
T3
VOLUME CHASSIS V-2398-1
CONTROL BLUE RED
COVER R4
12BE6 12 B A6 12AV6 50 CS
CONVERTER 1ST LF DET & 1ST AUDIO T3
T1 OUTPUT OUTPUT
85V 85V T2 5
1ST 40V 6
I.F TRANS 2ND IF TRANS. ( 117V BlE>.>_-_FRANS
r r- ZI
4
2 3 5 005 C4
2 01 - 200.n.:
ZI IKV
lEtri 6
100 470K 2-5 85V
L1 1z MMF OPEN SECONDARY
1.0 GREEN j4 2 READS
TB ANT. GREENI 4 7 6.2 34 VOICE COIL 2.65,
/TA ZI RED
TRIM DOT - L_ R6 COMBNATION OF
150 470K
MMF 80 BOTH A PPROX.3n.
T
85V R7
0-VV\.C--411
L2 I.5K
OSC. ZI IW
COIL 005
5) 12 JI -1/ osc.
111,J 'Arc
I/
4_ TDTRIM +-05A
-1 3 ZI -- 50
2
-CI
AVC R4 R5 K
AAA A 4
100K C3 ..t 3.3M ZI 13 VOLUME
.ol -r .01 -- 220 CONTROL C5B
1.4Pcv.i B-
MFi4AA 0--L)
NOTES: 35W4 50
I
RECT
ALL VOLTAGES MEASURED FROM COMMON NEGATIVE USING'A V. T. V. M., VOLUME CONTROL AT MINIMUM, 5
TUNING CAPACITOR AT MAXIMUM, LINE VOLTAGE SET TO 117 V.A.C. READINGS SHOULD BE AS SHOWN1:20%.
2 ALL CAPACITANCE VALUES IN MFD. AND ALL RESISTANCE VALUES IN OHMS UNLESS OTHERWISE INDICATED.
7
1256
BOTTOM VIEW OF L2 OSC ZI
APPLIANCE 3
COIL SHOWING CONNECTIONS OUTLET
6.8M 470K
2 3
005 220 150
0-11- -) 11-1 I-- C6 "'II 12AV6 12BE6 12BA6 5005
MMF MINE 470K 1
INTERLOCK .047 : 1
-*WV !
6-71133 71
GREEN DOT 005 100 r L
-I HO
MMF I CLOCK MOTOR
BOTTOM VIEW OF CLOCK CLOCK
TI,T2 17E TRANS. MECHANISM SWITCH
2 3 4 5 6 7
LI
6b6b6boacionoo)
35W4
I ANT.
LOOP
kOSC
COIL
VOLUME TO
TUNING
T3
Top view of chassis. _CONTROL V
Bottom view of chassis RS BLUE RED
R4 R16
cifis, R6 C16
C3<t=? TO START
T5
DI AL KNOB
STRING
39 5/4"
0 0.
CL
CI Figure 3 - Top view of chassis -
TURNS
T4 )
Z. 0
4
CNN
COT
TO TO opr
AN ANT 5
3 2 100K O 03
TERM BOARD TERM BOARD
BOTTOM VKIS
p CD
12BA6 1-3
FM TUNER
!Lau NTi3 ER 1st. I. E AMR 2nd. 1. F. AMP. T4 NOOK
r Z4
act C.
fD m
I - 5
22K CIS
4 MF
IA
EXT. P
3000
LINE
cn 0.
P3
r
col
LINK 5
SHOWN
IN
co
UNE
POSITION
100V
la 1978 2.91.111
140V T3 AUDIO AMP. AUDIO OUTPUT
RI3 R14
L3 XI 900 4W
3.9011 47
100V
117V r C20 C2I GRA R9
C13 1
C BO COT IM
so Mild 4 VOL. COST,
SOTTO, VIEW TAPPED
- AT 400K
C17
OFF -ON .005
50EH5 19T8 12134.6 12rAe. :
126513
SWIf R8
68K
3 -1 C25 5 4
RIS "'cm
100 MMF .
912
7W 17
, _,
C22 ca
.01 T.01
I. VOLTAGES TKEN WITH A 9 Tvm FROM POINTS INDICATED '0 8_, TUN1N, INDUCTANCE AT 14111MUM, VOLUME CONTROL
.cm
IC24 T MINIMUM, LINE VOLTA11E- T 1179 C. 140 SIGNAL INPUT. IN OHMS 1/2 WATT UNLESS STATED 0 THLkWISF.
_ L ALL CAPACITANCE VALUES ARE IN RFD. II ALL RESISTANCE VALUES ARE
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
WESTINGHOUSE Chassis V-2400-1, Continued
I. R16
- I.5- 1 1 I
t
R5
11 -WW. C13
oWielN
l---1
R6
I------IC16I 114; py
".7 TO
R9 I l
40-AA^r ir ; 4
1 TUNER
s-
*A c". C14 IZ31 T3
A
1
12BA6
I
1-
i
6 I
12BA6 2
3 .....-----40
TO
15
141-.
CI7 f . C21 110--01-13
TO TUNER
TO 411--60 7 ,,, 1 Zb FILA
T5 .LC234.
TO TUNER
6 t0145 2 e Ic 12.71: 411C20
7 6
.1 I 3 C22
RI5 Cl
41 -ii\ TO
TO T5 TO 15 ANT TERM
Figure 4 - Bottom view of printed circuit chassis with components shown symbolically
INPUT
- Bottom view of tuner printed circuit with components shown symbolically
154
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
WESTINGHOUSE Chassis V-2400-1 ANTENNA INFORMATION
When the metal link, on rear of the receiver, connects the
(Continued) center and right hand antenna terminals, the receiver is
using the built-in antenna. For best results the AC line cord
should be stretched out rather than coiled. In weak signal
areas or under adverse conditions, it may be necessary to
use an outside FM antenna. In this case, the metal link
ALIGNMENT should be removed from the center antenna terminal and the
2 -wire lead-in (300 ohm), from the external antenna should
1. Connect two 100K ohm resistors from test point "C" to be connected to the center and left hand terminals.
ground as shown in schematic.
2. Use VTVM connected as indicated in the FM alignment CHASSIS REMOVAL
chart.
3. Use a signal generator with output frequencies of 10.7mc 1. Remove screw from cabinet bottom and two screws from
and 80 to 110mc. Generator should have al adjustable cabinet rear.
output attenuator. 2. Remove control knob from left side of cabinet.
4. Set the volume control at maximum. 3. Separate cabinet front from cabinet back. The chassis is
5. Keep the signal generator output voltage level low to now exposed and ready forservicing. To replace chassis
avoid overload. follow reverse of above procedure, being careful to cor-
6. Sweep generator providing 10.7mc signal, 500KC sweep rec ly slide chassis into side grooves on inside of cabinet
width for discriminator alignment. rear cover.
Connect Signal Signal Generator LI VTVM Adjustment
Step Generator to: Frequency Setting Connection
1 High side of 10.7mc Min Between points Secondary of T4 (top adj.)
generator to pin #1 unmodulated "A" and "B" for zero voltage,
of 2nd IF Amp.
2 . .. J, Between point Primary of T4 (bottom adj.) for
"C" and max. Adjust generator output for
ground VTVM meter reading of 5 to 6 volts.
3
.. ., ..
Between points Recheck T4 secondary and adjust
"A" and `B" for zero voltage if necessary.
4 Antenna terminals ., " Between point Primary and secondary of T3 and
using network "C" and T2 for maximum. Reduce generator
shown in figure 5. ground output to maintain 5 to 6 volt
reading.
5 REMOVE THE TWO 100K OHM RESISTORS
6 Antenna terminals 108.5mc Min. Between point C7 for maximum negative voltage.
with proper term- unmodulated "C" and
ination see fig. 5 ground
7 .. 106mc Tune for .. C4 for max. negative voltage
unmodulated signal (rock in).
8 REPEAT STEPS 6 AND 7 UNTIL NO FURTHER CHANGE IS NOTED
ALTERNATE DISCRIMINATOR ALIGNMENT PROCEDURE (OSCILLOSCOPE METHOD)
Connect Marker and Marker Connect Adjustment
Step Sweep Generators to: Frequency Scope to:
Pin #1 of 2nd IF 10.7mc Between point T4 primary (bottom) for symetrical response (see
1
Amp. "C" and ground figure 6). Set generator output for 4-6 volt reading.
2 ,. ' Between point T4 secondary (top) for 10.7mc marker at center of
"B" and ground curve (see figure 6).
-50055 LEADS-
/ RECEivElt
10.7 MC
4 I- /MARKER
i50.+C
50 IrEPEOANGE OE SWEEP GABLE
ZO At
52 +5. 56 1 120 A
2t 85 A 110 A.
Figure 5 - Impedance matching network Figure 6 - Discriminator response curve
155
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Westinghouse
SW 1
RED ON OFF
TO T 3 CLOCK
BLUE MOTOR
117y.
APPLIANCE
In
OUTLET
AC
®®i.
-,---.-1(...---0111 MODELS
(5)L210
e QQ C6
TORSC.Im ilf,-,:::
,Iti.0,
Q5 C5 1 (4)35W41" B- ..A.w...1)1Ffi
"D" L_-__1,
H -718T5
a, 0 --ic4 MI ® 4.........ra C58 so.-...... 410.....-.. (Turquoise/White)
5n (t)
-,::CI
<stsf), :R5 :7.-21 ANTI _411
i
T2
I ® CZ)
B" H -719T5
/
14 31 R6 (Ivory/White)
prt,F.7
,
00?8A6 r- -4
012AV6a, ' .s ® j3 4
R3 Ave R21C4- TI H -720T5
T!../ ti..2
B- -IC3 (Coral/White - Pink/White)
R4
CONTROL CHASSIS V-2401-1
BRACKET Bottom view of chassis.
I Sr
6 1
.ES.
On ST WC.
SOCS
Tr
IST I f TOMS
-te
o. v
SSO
-4- 1-
C.
AOC
ISO
am.
4 Atm.
l> Ve
SC,10.1 Of LI OSC .00O.
0.0....1.1 CONOCO°. JVV..O. -On/VV.
00S nO, S0
NIOLOOICS
SolSIr
L DIAL DRIVE PULLEY
SOS 103 ,...15:
- T
-44
t: 1' if I- .1
NOS IN& ASO VS1
Ph TURNS
. S S
,ons omit
" r.TY.F1 o. oft *IOC . NV. ',W... 44.,.
5- COOloolf
6
V.CColtO
rr GANG
CLOSED
START
FINISH
I TURN
0
TUNING SHAFT
3 F TURNS
-'
TUNING vot.uNIE 21 c
ALIGNMENT
While making the following adjustments, keep the volume control set for maximum output and the signal generator
output attenuated to weakest usable signal level.
Step Connect Signal Generator to - Signal Gen. Connect VTVM Across Voice Coil
Frequency Radio Dial and Adjust for Maximum Output -
Stator of ant. tuning capacitor (A) 455KC Minimum capacity Top and bottom slugs of T2 and Tl.
through a 200 mmf capacitor. 400 Cps.
30% Mod.
2 Radiated signal 1625 KC Minimum capiicity Oscillator trimmer (D)
3 Radiated signal 1400 KC 1400 KC Antenna trimmer (B)
156
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
CLOCK SWITCH
OFF - N
Westinghouse
RED
TO T3
.1 CLOCK
MOTOR
IIAPPLIANCE MODELS
IltV OUTLET
Cb
,0) .01; e CS H -722T6
(Cameo beige/mocha)
- 999
® 35C5 1- 5W4
1t6 133 -
' T2
21.
I,
I- . 10 Cb 0-t4--* Gan
H(Pink/Charcoal)
-723T6
t ....3.: ems.. 4h-rs-' 0) ED 0'
..
--Yr *fit 4
*dot 4 W 4:
It ,..1,.1 CHASSIS V-2401-2
R6 Bottom view of chassis
CONTROL BRACKET
011 twit
Or
OCT .- 040
-110--1--
`11'
Acaragi n
.101
T 4
411
DM. 01, 0I
COM. 100 0101ILTO11
ORIZIr toe, 1-\-*--
1I
4
Ias
OTTP ve
+- \
I. men IyOlo ../ ...tic LOTCa at 4.01411 -
[11C T .. 10I 410 ALL 11(141,Ct .-[ /*NI ....a> :[11 SINICOIED
OL1141,
4.1IOtTIll , 1Du1.0 IN AS .00ft ev etas*. rom root. 0. E"'"cogg-.
117 V.
AC
E O.A. ORvE
0
RI C
T.3
;!ANT.
{Lc! } It TURNS
.;TRIM R3
j, A" -TM= C6
r 5C2 0SC
'TRIM
c3
TRIM 12BA6
L2
c 11111
Top view of chassis.
TUNING VOLUME
Frequency Range 540 to 1600KC
Intermediate Frequency 455KC TUNING SHAFT- /
3 Y. TURNS
CHASSIS REMOVAL
1. Remove four screws, two from top corners on cabinet back
and two from cabinet bottom.
2. Slide cabinet front and attached chassis out from cabinet.
157
R F AMP CONVERTER I st IF AMP 2 nd I.F AMP AUDIO DRIVER AUDIO OUTPUT
MATCHED PAIR
DETECTOR
Ri
141C
RMC kt,
= =
-5.7v
NNiR92:
t *4" Eaml c,;
,
40
MIL 4
re -24--
9
"1r i
Im we C17
NS
3V
1223
RIO 25, L
CI3
.1102 VMS COIL
.15'11,2
470 0 IA J
EARPHONE
JAM ma,
AVG 3.0
CIO L
10 MF R9 412
]:* 410
-5-WV
-4 0020
51
!AE
TI
NOTES: *26
03 DLR. SERvICING,TOTAL BATTERY DRAIN SHOULD 111 METERED. 1 100
40 WITH NO SIGNAL AND VOL. CONT. AT MINARAM, TOTAL BATTERY
05 0010101 PAINT ot. .... E TRANATEPER =
.701 05 0 60 ARAN STOOD RE .1 MA. APPROx. a +,rpc
02 10, Z. ALL CAPACITANCE MLLES WI Affix ,ALL RESISTANCE VAUJES 191v0.1.0. SWIA fWlp
02 t0 ER F "
N OHMS WKESS OTHFRw15E SPECIFIED.
BOTTOM VIEW
NOTTDM viE S. VOLTAGE MEASUREMENTS MADE WITH A v.T.V.M. FROM rows
":
r '
livocArco TO GM. WITH %RING CAPACITOR Al MAR. lSO . 3V
SIGNAL NPUTAVOLLATE CONTROL AT MIN.RATTERT SOUFKE AT 6 25236 - $120
,
VOLTS. , 01.110 - 512.
FN., PRODUCTION RUN WITH 5120
- __
11 FIRST PROONCTON KW WITH 5121 TOTAL CURRENT
MA, RESISTOR USED *110 5121 OR 211113 0.ATPuT TRANSISTORS MASUMED KO%
W 2.073 TO II..., GORE SPIE.,,,a10N,
-(=3- PRATATCHlt. PA. VE Owe" TO NESTRO0NOUat sPECSICAT10NS.
'3c) O'S I. F. 455 KC. TA TO
rl DOT1A 00 DOT -.01 20
a 16 06 ',: 50
04 30 OR
O LI
-c 0 BOTTOM VIEW BOTTOM VIEW
(1575-ws9
0
4 H
C/o_ RIO R13
CIO
0
50rick a.
0
0 827 C14 SWIAv
Wi
RE
I- -
' 7" 4s-
- CII
-11
7_7
-VW-
RII
-_ RI7'
U)
O
1.3 74: ;
21C13
7.74;kiri 1
il L.'Z.! III -:A_1/ ILP.4iJ I I Cl 6 15 51 rn
6 i I 3V
1
I
tE el k
T4 ,,e 1
I
3
OSCILLATOR COL
CII 'C" "F" "A" I \ \g,i 4 RIB
BOTTOM VIEW RF CSC. ANT.' i 0,,,4
3: C lev44.",y, I
Ica
ID I +,.., co
2 Re IfIFL------' Rle
QtlU tel
' TRIM TRIM TRIM' I 211-DIF`_-__I--;:fe-15-10 I
hi ciEl
u La r .... .._ _ R9 ...viv....
_)C12_AAm_-ii-- ....-..-1 3V 7.7.
13 41 Ri2 C2I
1
R4 AUDIO C20
R6 I
5 T3 6 OUTPUT R20 IC 19 T+
1M, T2 2 II (MATCHED PAIR) -WO- TH2 R24
f E C:TSW I B
RF L_ _
E R26 -\ DRIVER
1 ;,I + C 7 --w/,R7
ci3 i 35 TI 41 R25 Rp. .. T6
. TH I
LLB C
RI
142- ID- e! -VW- _Ara-
C fie
1iC 8_, R5 Is,
R22 ..444.--
R2 CONVERTER
25n
R21 V.C.
JI
Bottom view.
6n
1/2 7025
-0-R- C3 CS RI4A C9
RED DALA7 .02 470 3M .001
R.CHAN
--- 6CUS
INPUT
82v -fro v. EXT
D- SPKR
PLI
!6
RIA
2M R2 6n R SPKR
RI2
3 RBA 100
IM
C6
.0033 YELLO
RIO \ BRN. TOP
'2:AR1.`g CTR.
2208 R9
II 82K
Ci I" ROT
.033
= BLUE
600V JUMPER FOR
R16
1.2 V. 5005 BUILT IN STEREO
g.1412 DUAL tiv
BASS TREBLE
R4 C2 CONT.
2.7K IOW RIB CII
9 100 50W 9
2W ORANGE
R6 RIO
220K 82K OR
ruE*T3 LIMPER FOR
SPKR. OPERATION
RI7 /
INPUT D- _ _
PL 2 / 10K
RIO / S"q
2M / C7 2
R3 .0033
33K R821
GIL L. SPKR
IM RED BLK
6 He v. SW2
OPEN
FOR
11 STEREO
C 20K CIO I'gOov
1/2 I2AX7 82V. 470t1
6CUS NOV.
t". ON
BALANCE CONT.
117V RI9
AC
Xi 130y 20V A -TERM. NEAREST
COLOR DOT
R2I NOT
R20 ISO R22
125 V 1. CAPACITANCE VALUES LESS THAN I ARE IN MFD,
10K 2W
PL.3 AND VALUES GREATER THAN I ARE IN MMFD, WHILE
vvv ALL RESISTANCE VALUES ARE IN OHMS 1/2 WATT,
6CUS 6CUS 12AX7
UNLESS OTHERWISE SPECIFIED.
irtrway< Cl2A CI3A CI4A 2.
20AIF DC VOLTAGES MEASURED FROM B- USING VTVM
-BOW& ROMP 3 AMPLOK CONNECTORS VIEWED FROM CONTACT END
CAP i
4 REAR SECTIONS OF ALL CONTROLS ARE
SWI RIGHT CHANNEL.
5. ASTERISK NO MEANS THIS COLOR USED ON EARLY
OFF -ON PRODUCTION UNITS ONLY.
1
SWITCH
PART OF CI (S co
RECORD ,047 1 r
PLATER 600V / CHASSIS GND.
V
I PHONO
AC PRONG SERVICING CONSIDERATIONS
BASE
MOTOR
I PLATE
Phasing
POWER CORD POLARITY Stereo sound systems require that the speaker systems
To remove the possibility of hum due to incorrect power be properly phased. Incorrect phasing causes unrealistic
plug polarity, try reversing this plug while the Bass and blending of the sound from the two speaker systems.
Loudness controls are set at maximum. Leave the plug in Correct phasing of all audio transformers, in accordance
the minimum hum position. Always check the AC power plug with color coding shown in schematic is essential. Each C
polarity first when servicing a hum problem. speaker is coded with a dot on one terminal. The striped
speaker leads must go to the speaker terminals marked with
CHASSIS REMOVAL a color dot.
1. Remove control knobs. To check phasing, place a monaural recording on the r
2. Disconnect Amp-Lok type plug from record changer. record changer and set the amplifier to reproduce a stereo
3. Remove phono plugs from record changer noting color of recording. Set the loudness and balance controls for equal
cables and their respective jacks. volume from each unit (balanced). If the speakers are prop- r;)
4. Disconnect speaker leads noting connections with regard erly phased, the sound will seem to come from a point
to lead color and speaker phasing dots. between the two speaker systems. If the speakers are not
5. Remove two nuts securing left speaker baffle and remove properly phased, the sound will seem to be coming from the
baffle. sides, or alternately from one side and then from the other.
6. Remove four nuts securing chassis and remove chassis. Usually less bass will be heard with incorrect phasing. Re- 23
NOTE: Be sure during chassis installation that phono cables versing the leads to one of the speaker systems or to one m 23
to changer and leads to speakers are properly phased (refer pair (left or right) of cartridge terminals, will phase the units
to schematic diagram for speaker lead color coding). correctly and correct these conditions.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
RED TO RIGHT CHANNEL
TO RIGHT
CHANNEL
TO LEFT
CHANNEL
BLACK TO LEFT CHANNEL
WHITE
BLACK TRACER
Westinghouse
YELLOW
YELLOW
MODELS
H-56ACS2 [Charcoal]
Gray
H-56ACS1 [Saddle
Tan
R -)
rAf'at BA S
CONTROL ETA! TREbLE
C'NTRCL
A LOUONES
CONTROL
IA
CHASSIS V-2507-2
Top view
of chassis,
AEA
CastroAC. nams
41,01.02 DEC0110 C0A0DE
Cartridge
terminal
wiring. C3
FY 3
A IPA
AA.
10
FuSIDLI
1171.1 AC
XI
AL nausea. ...NV COLON SOT
ar JAE. 1.001010 OA CA*,
ovOL 11AGESI.ASIJOIED CNIC.0111 4.10 US4014 LOUORLSS C041101, I Aunt ,
au CSAACilANCE VAL., ANI
ISE SPECIFIED.
Awo ALL ESkS 'ASCE VA,LuEs L.,LiNUSS
CHASSIS REMOVAL
1. Remove control knobs. Remove the perforated tube - CARTRIDGE AND STYLUS REPLACEMENT
service cover which is attached to the cabinet by 2 The cartridge and stylii are constructed as an integrated
phillips screws. plug-in unit. To replace cartridge, lift tone arm and grasp
2. Remove the 4 phillips screws holding the motorboard. cartridge on notched sides. Pull cartridge out of holder and
Lift the motorboard. insert new cartridge. The cartridge should be oriented so
3. Note the color and location of the two coax cables con- that the key, in the cartridge, fits into the key -way slot in
necting to the record changer. Disconnect the amp-lok the holder.
plug and the two coax cable plugs from the record changer.
4. Remove the 4 speed nuts holding the chassis to the POWER CORD POLARITY
cabinet front. Remove screws holding the two External To remove the possibility of hum due to incorrect power
Speaker sockets. plug polarity, try reversing this plug while the Bass and
PHASING Loudness controls are set at maximum. Leave the plug in
the minimum hum position. Always check the AC power plug
Each speaker is coded with a dot on one terminal. The polarity first when servicing a hum problem.
striped speaker leads must go to the speaker terminals
marked with a color dot.
STEREOPHONIC
CARTRIDGE
Cartridge -stylus
replacement.
KEY KEY.WAY
160
V2A
V9
1/2 7025 OR 12 Ax 7 CB
100 V3A 6805
PRE- AMPLIFIER
1/2 7025 OR 12Ax7 AUDIO OUTPUT YELJBLK
AUDIO DRIVER
150K ca
2102 2662 7
.0022 6
Cl2
.01 9 266V
RBA
IRA
CS R12
.01 MOK R14A 2.02
IM RIB
RIO ISOK 72
R9 6.8K 020A. TNT TOP
50010
22K
DUAL CIO E
TREBLE 0022 siOng
cim
I
-40
.gO22 0 BoT
DUAL W
BASS 17208. B
RIO RIG N
SOON
R13 6.8K
220 0140
100K RID E
2 O2 150K
3
C8 K
RBB S I
DI RI7
PL2 3310
LEFT CHANNEL CIA
.01
2662 7
C7
.0022
V3B
1/27025 OR 12 AK7 ORN
22B CS
AUDIO DRIVER
VS
61305 NIB
YEL
df:
1/2 7025 OR iE AM 7 AUDIO OUTPUT LEFT CHANNEL
100
V 190
PRE -AMPLIFIER
SW2 0 TERMINAL NEAREST COtDR DOT
A :11E
0 _1!g JA JACKS MOUNTED ON CABINET
TI VI 022 II OPEN PFORRT STEREO L
12
RED
RED 6CA4
RECTIFIER VVV
310 VAC
R23 1424
IOVAC 36 230 4W 2.20 m
3
0158
WESTINGHOUSE
+_._ c154 T DOMED
_ a 40mFD 40mFD -A C3% F D
Chassis V-2507-3
BLK/ HOT
E CA 1 Models H-57ACS 1
gl F
5 H- 57ACS2
E EH
MI Ill
ORANGE/
NW. CI6
6'117 14
10V
vi 024-B v 34-B V4 V5
BRN/WHT 6CA4 7025- I2AX7 7025-I2AX7 6805 seas CHASSIS REMOVAL
RECT. PRE -AMP DRIVER AUD. OUT. AUD. OUT.
GRAT/WHT 1. Remove control knobs. Remove the perforated tube -service
cover which is attached to the cabinet center -section by
PART OF RECOR CHANGER
NOTES:
2 phillips screws.
I. ALL CAPACITANCE VALUES LESS THAN ONE 11) ARE IN MED, VALUES GREATER THAN ONE 111 2. Remove the 4 phillips screws holding the motorboard.
ARE IN MMF, ALL RESISTANCE VALUES ARE IN OHMS 1/2 WATT UNLESS OTHERWISE
SPECIFIED.
Lift the motorboard.
2. D.C. VOLTAGES MEASURED FROM POINTS INDICATED TO CHASSIS GROUND - NO SIGNAL 3. Note the color and location of the 2 coax cables con-
APPLIED, USING A V. T. V M., LINE VOLTAGE SET AT 117 SAC.
3. REAR SECTIONS OF ALL CONTROLS ARE THE RIGHT CHANNEL. necting to the record changer. Disconnect these 2 coax
4.. INDICATES A SPECIAL CONTROL WITH OPPOSING TAPERS ON FRONT a REAR SECTIONS. cables.
A WESTINGHOUSE REPLACEMENT PART MUST BE USED.
5. ALL MARLON CONNECTORS VIEWED FROM CONTACT END. 4. Disconnect the amp-lok cap connection from the power
transformer and the amp-lok plug connection from the
To remove stylus (item #1), move lever handle (#2) until record changer. Remove the record changer.
it is pointing down. Gently pull spring clip (#3) slightly open 5. Remove the 4 nuts holding the chassis to the cabinet. Tag
with finger. Grasp stylus by lever handle and slip it out from the wires connecting to the 2 External Speaker Sockets,
under clip. To replace stylus, slip heel of stylus under clip. then unsolder these wires.
Gently pull clip slightly open with finger. Slip stylus under 6. Remove the 4 nuts holding the power transformer. Remove
clip making certain that stylus shaft rests in center of STYLUS REPLACEMENT the chassis and the power transformer.
coupler (#4).
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
MODELS H-54ACS1, H-54ACS2,
Westinghouse CHASSIS V-2508-3
STEREO INPUT 50EH5
STEREO AUDIO OUTPUT
CARTRIDGE RIGHT CHAN. IIOV
RIGHT CHAN 0 R3 7
2 3 680K LT I RIGHT
R2 SO3 PL 3 CHAN.
33K 85V
LEFT CHAN RI 2-5
SO I 2 MEG 6 270n:,
PL I TOP VIEW VOL.CONT
PRONG VIEW OF SOCKET R4 3.2 .t-
OF PLUG 68 .75n.
SPKR
ICI
LEFT CHAN.
j..7047
ri--12A --1
C
4V
T2
R6 20 MFD LEFT CHAN.
R5 33K 2-5
1I7 V 2 MEG 8 5V
AC VOL.CONT. R7 6 3.2n.
680K SPKR.
SO 2 7
KEYWAY
35W4 50EH5 50EH5 IIOV
6
OFF -ON PL 2 4 3 3 4
50EH5
3
SWITCH 4 AUDIO OUTPUT
PART OF
RECORD RB
CHANGER 3.3K
120V
IW
7
5
A C PHONO
MOTOR
C38- 1C 4 C
80 MFDT T4OMFD
35W4 TB -
RECTIFIER
CHASSIS REMOVAL
NOTES: 1. Remove the perforated tube -service cover which
I. ALL CAPACITANCE VALUES IN MFD AND ALL RESISTANCE ed to the rear of the speaker baffle by 2 phillips screws.
VALUES IN OHMS UNLESS OTHERWISE STATED. 2. Remove the 4 phillips screws holding the motor board.
2. ALL VOLTAGES MEASURED FROM B- USING A V.T.V.M. Lift the motor board.
LINE VOLTAGE SET AT 117 VAC READINGS SHOULD 3. Remove the 2 cable plugs from the sockets on the chassis.
BE AS SHOWN ± 20%. 4. Remove the 2 speed nuts holding the chassis to the cabi-
3. CHASSIS GROUND '7',7
net front.
COMMON B - 5. Disconnect the speaker leads.
CHASSIS REMOVAL
WESTINGHOUSE I. Remove phillips 4 screws holding the motorboard. Lift
the motorhoard.
Models H-51MP1, H-51MP2, .'.1)isconnect the speaker leads.
H-51MP3, Chassis V-2508-1 Remove the chassis cover (2 screws) and unsolder the 2
leads from the pickup cartridge and 2 leads from the phono
motor.
1. Remove the 2 speed nuts holding the chassis to the
motorhoard.
25L6GT 110 V
IC3 TI
R5 .1/400V
3 50K
ON_E
2701-41
R2 CONTROL
RI 33K 5 OV
500K 4 R4
VOL.CONT.8 5.4 V
i0K
2 C2B C2 C
R3 40mFD
50 NOTES:
CI
.047/600V
-C24 I. ALL CAPACITANCE VALUES IN MFD AND ALL RESISTANCE
20 VALUES IN OHMS UNLESS OTHERWISE STATED.
/777
B- 2. ALL VOLTAGES MEASURED FROM B- USING A V.T.V.M.
SW1 ON LINE VOLTAGE SET AT 117 VAC READINGS SHOULD
CHASSIS BE AS SHOWN ± 20%.
GROUND -o
40VOL.CONT.
3. CHASSIS GROUND dn
COMMON B-
90 VAC
PHONO MOTOR
K1 R6
I I7V 65MA 220
AC ----II4
SEL.
125V vv\A,
5w
11Ely
FUSIBLE
162
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
WESTINGHOUSE Models H-52MPS1, H-52MPS2, H-52MPS3
AUDIO OUTPUT CHASSIS
50EH5
7
110V
TI V-2508-02
R2 85V
RIGHT CHAN. 33K 2-5
117 V
AC
270ng
RI
2 MEG R3
RED 680K 4V
C1
.047 OFF -ON
STEREO BLACK =
CARTRIDGE VOL. CONT. C2A R4
0 68
WHITE MFD
Err T2
AUDIO OUTPUT LEFT CHAN.
LEFT CHAN. 50EH5
R6 270fn .
R5 33K 2-5
2 MEG.
VOL. 85V 3.2n
SPKR.
4 3 4 CONT.
R7 NOTES
35W4 50EH5 50EH 680K 110V
I. ALL CAPACITANCE VALUES IN MFD AND ALL RESISTANCE
VALUES IN OHMS UNLESS OTHERWISE STATED.
2. ALL VOLTAGES MEASURED FROM B- USING A V.T.V.M.
LINE VOLTAGE SET AT 117 V.A.C. READINGS SHOULD
BE AS SHOWN ±20%.
SW I
120V
C2B-7
80
R8
3.3K
-T ao
C2C 3. CHASSIS GROUND Kc
COMMON B-
MFD
I
iB MFD
35W4
RECTIFIER
CHASSIS REMOVAL
1. Remove 4 phillips screws holding the motorboard. Lift
the motorboard.
2. Disconnect the speaker leads.
3. Remove the chassis cover (2 screws) and unsolder the 2
leads from the pickup cartridge and 2 leads from the
phono motor.
4. Remove the 2 speed nuts holding the chassis to the
motorboard.
WESTINGHOUSE Chassis V-2508-04
Models H-55ACS1, H-55ACS2
50EH5
AUDIO OUTPUT
tiov
R4 SPKR
470K 3.2
HIGH
R. CHAN.
SOi
SOCKET
(TOP
RI
OOK
RNA
w RYA
2M
5
C 2A
20 mF
133v
R. CHA
SO3 wog
r PL3
OUTPUT VIEW) )
STEREO
CART.
PLi
PLUG
(PRONG 89
VIEW) 2.2M r2
L CHAN 2-5
6
100 83v
2/.
50EH5
AUDIO OUTPUT SPKR
3.2
OV
ti7V
AC C2C
40 ME
PL 2 SO2 35W4 50015 50EH5
SWI 3.T
-M- Tti
AC ON7f, IN
0 4 '\16(\1,3.1 4
SWITCH
PART OF C2B
RECORD CHANGER NOTES:
RHONO
BOmF I. ALL CAPACITANCE VALUES IN MFD AND ALL RESISTANCE
MOTOR - KEYWAY VALUES IN OHMS UNLESS OTHERWISE STATED.
117V 2. ALL VOLTAGES MEASURED FROM CIRCUIT GROUND USING
A V.T. V. M. LINE VOLTAGE SET AT 117 AC,
READINGS SHOULD BE AS SHOWN ± 20 %.
NI VOLUME CONTROLS CAN BE ADJUSTED INDIVIDUALLY
OR TOGETHER.
35W4 -4- CIRCUIT GROUND.
RECTIFIER CHASSIS GROUND.
3. REAR SECTIONS OF ALL CONTROLS ARE RIGHT CHANNEL.
163
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
WESTINGHOUSE Chassis V-2509-1
Models H -R1100, H -R1101, H -R1102, H -R1103
t 70A
Moat MON_
LOT
Liana
V3
la.
....E. . SOWS
; 7-
ss .
Otte..
A
1
ad
2 ,.p, op., taltaaa Oa '.
Tot , STara '
,tt ;12 405 'Napa , ParrapaaLaa
Ao Mat .040 OPPPY, nor r I
VT
nal'ttot , -
4I
VS
2024
1 tt Gat
TIP
- 1b1,.. Pease *wand
WESTINGHOUSE Chassis V-2509-2
arfatraan=" 41:11".
ataa at al II Tv C.00 saw O.LOLOMESs AT hisaidpili, RAMA
Trall:TOTTa
Models H -R1200, H -R1201, H -R1202, 1.:0.1.TAGES SAWN UNDEFILd0
CAW,. 'SET a
anTla Oa. sva Ad ALL POSITOVI E MAT SA00.
ALL SEMMES TO I. EFT AM MOAT Ass AS v IEWE0 FAL. FRONT OF SET.
H -R1203, and H -R1204
. loos a sow coma ow sow. Tann o pow pm au woos.
ealaaaaa PaPaa4a00 Pao par a roa
AFT
ce
wC
r .
4011.-
40.7 cAppeaL
kn.4-
$17.
. dauz
SSt
.sp
ard.
vrt --
or+ POIS
at Pat
O.sgc
164
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH Chassis 4B22Z and 3B30 used in Model SF174
68E6 68A6 1/2 I2AX7 1/2 12AU7 1/2 12AU7
CONV. L F.
TIT
0.
407
txe
voi
tM
Oo t220
4044
NIS ISOITIOS
10 *HO NEP
VI HOMO,
N
TfOt
TOO P0
T KIS
POMO.
MEM
0111'4011.
RE CHASSIS
4B22- 4B23
IP IAA
IP 4 SERTIII SOHO 0
0010 MOM
1/2 I2AX7 004 +HO C2
110/ ".tot
CI?
SI. IF
HE WE
HMI
PIS
O4
tHNi -01 NOS
MX,
T tell
tp 010TACT SOCUT
001,4 040
TS OM
ROTH MAKS CO OPPOSITE SIDES
ILLETRILOTIT 'FIT ti -IN
TO.1,011 0413 010.11111 Int IMO.
6B05
PWR. AMP
Oa
SAID
.4
0410
I COMPLETE TURN .11
AMUND SLOT fi TREF
I TURNS AFTER SLOT ,F2 TURNS
62 TURNS MOUND PULLET ON 6805
RADIO PROMO SWITCH DIAL CORD DRIVE PWR.AMP.
POWER SUPPLY a AMP
3B30
ALIGNMENT PROCEDURE
Connect Dummy Input Sig. Set
Operation Oscillator to Antenna Frequency Dial at Trimmers Purpose
5U4GB
5U46A-51.146 JMir 0101
1 Converter .5 Mfd. 455 Kc. 600 Kc. L3,L4, Align I.F. RECT.
Grid L5,L6 for maxi-
mum out-
put.
2 One turn -- 1600 Kc. 1600 Kc. CID Set ose.
oTo/rsti ty.
loop to dial
coupled scale
loosely owtt 1100:,0
3 to wave -- 1400 Kc. 1400 Kc. CI B Align PA°
antenna 00,00
magnet S 10401
stage
165
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH Chassis 4B25 used in Models SF112E, R, W 2204 ±10%
W.
274 :10% C16
015 010%
SPI
3 I/2"
6AQ5A TWEETER
IC2 1/2 12AX7 PWR.AMP.
22 NNE
MA
T =lox AMP Nlr
SP2
3306 I
BASS5MED C9 II/ 7 1/2*
CONTROL WOOFER
02*
'FRONT) 3 MED. 1J275 047
at
LOUDNES
2204
710%
CONTROL
IFRONT1 C8
O%
i034 3900, Sr4 SP3
150
2506 t-10%
3
TREBLE
NW C10 NEVER 1
CONTROL
CI
274 30%T
.0022 V X
FRONT) .0042 CI9 I
±10% I-10% 22 mFD
± 10%
6801 10% MED
< SP4 I
7 ire i
R4 WOOFER 1
25V 240 116- EL
'LTtw 5%
SRS -2
330
MA,
11804
'510%
.404 I_
STEREO SWITCH ON BACK Ofd
MONO 710% mTio0 NOTE
BASS TONE CONT.%
INPUT SHORN ON OUT OR RFD JUMPER TO NE OPENED
SOCKET MONAURAL POSITION 30 v WHEN SRS -2 15 U5E0
(REAR VIEW
CA
330
210% 'sr 2204 CFI
:10% .015
MAP 110%
0 ±10% 6AQ5A
1/2 I2AX7 276
C5 1190}
.0% PWR.AMP. 210%
22 RYE AMP.
RIB
5 MEG
BASS NOTE CHANGER MOTOR SWITCH
CONTROL CI3 3905740%
/00 TURNS AMPLIFIER ON 4 OFF
REAM ROB
3304 311E6 I 047
2205
LIDUCRESS
CONTROL R31) 5Y3GT
(WEAR) 2504
210% 45 TREBLE RECT. '
CONTROL
(REAR) RECORO CHANGER
C6
0022 2.71 tIDIL
},0. m.C12
RED
PHONO MOTOR
PLOD
KEL
1101[3:
CI5 II0
ARROW ON CORIROLS INDICATES CLOCKWISE ROTATION.
TEL
ALL RESISTORS OE 205 TOLERANCE I/2 POT CARION UNLESS Ns,
O1IIF01 SE SPECIE I ED. 5600 16111
ALL VOLTAGES ARE D.C. UNLESS OTNEOISE SPECIFIED. OW/TEL
2.
IIKVAC. A 30 A.C.
ALL VOLTAGES ARE MEASURED WI TN POINTS 1.ICATED TO CRAWS 75 WATTS
WI TN AN A.C.-11.C. VACYLO. FLOE NW
I
C20A 1C2OB C20C
40M 0 401VD 20MFD
PHONO MOTOR A C 450 450 If 350 v
DOOM 0505513 SOCKET
ZENITH Radio Chassis 5B29 used in Models SFD2505E, R, W
1/2 12AX7 1/2 I2AU7 6E105
PWR.AMP. SP;
1ST AUDIO DRIVER 5.
TWEETER
1 C16 C27
568 at CB C11 47 IMF 3 RFD
1210%
IA 210% 047 2704193% .0022
,n_ur //
2 MEG. 3
LOUDNESS
±10% WOOFER
52K CONTROL 4, C9 4.6 3305 14
.0% (FRONTS 4701411F
<
330
210% ±10% V X
C3 X
0047 X
475 IW I
7.3 I
110% R21 3900 210%
I MEG
I TWEETER I
690 110%
TREBLE
CONTROL
226110% CIS
I
721.
-3 MED
I FRONT( .47 110% 1
21.:1% ID I
t
CI
.011FT2
CIO
.0022
RSA
TKO 55
330
V X 1 ill 17 I
25V
210% TIASS
.01
Cl2 CI3 AR 330E ±10%
TEL 4...>r_._-
1
WOOFER I
100K
iTikeli .c°33T
± lox z lox SW
MONAUR L I
STEREO
SWITCH ON V. - I
SRS -7
INPUT UR 7MS
BACK OF BASS
IM
TREY VIEWS TOME CONTROL
a., R
!,
CAL 1/2 12AX7 1/2 I2AU7 CI7 5,;
47 IMO 100K C26
110% 1ST AUDIO DRIVER f'7E .1
6BQ5 147 NW
±10%
I4Or PWR.AMP.
42111 56K
2 MEG 20% 2.2K 210% C24
T
.047 27002110% .0022
1505 LOUDNESS
110%
et
47 2101 17
210%
925
CONTROL
(REAR I 44.5
= WE
44, Stn.
3900210%
5Y3GT P:5
?1 RECT.
CS
0022
710%
C6
V X 1.10%
R29
X V t_Tm
1-10%
DO
51! ;
.004? D' KG .01
±10% ±10%
k TREBLE
CONTROL X4Or SW,
(REAR/ ROB
C25
I MEG
COO MSS
TOP VIEW 0022 - CONTRL
REAMSI
ITO%
NAY 117 VAC IVO% 5600
8251.10% 0033 75 ROTS W 210%
210% t3OAC.
-1(
I RECORD CHANGER I V C29A C299 C29C
40 Y D 40 MED 20 MED
MONO MOTOR
I
(For NOTES 450 V 450 V HO
PLUG
_1 see above.)
166
1/5 X
52 1/2 12AUZ 29 X
V2 12007 AT AT AT
O 1000rl O 1000% O O O 1000%.
-c)
VIC/ X 29 X
U2 12207 AT AT 024
O 1000% ® 1000% 0 (4-11
3 mF0
1/2 12AU7 0<
1/2 I2AX7 PHASE INV. 6805
1/2 12AX7 1ST ACD10 1/2 I2AU7 PWR. AMP. 025
1ST AUDIO RIGHT CHANNEL 2ND AUDIO 4-11
3 %KO soz
Cie
LEFT CHANNEL TWEETER
.3 11
MODEL 5E125
013 Xigt4_ USES 4 SPEAKERS
i.
-.1315-4-11 AS SHOWN
210K210% .22
110%
= 3'30 WYE T mmE
v:0%
BARE
10% SPA
C3 1. WOOFER
&Ho e'120`.2.
XS v o E
0T021.0, cis
R3 sp3
ier ,t WOOFER
330 him, "Fp
09 CII.0022
It1Fi
4 12 '104 CONTROL cm 25E
FD t,t MODELS 5E119 a SE120
.__T..6e 2W
RIB K1004, WW USE I II 5* TWEETER SPKR
2 mEG t" 056190%
AND I I12'11/OnFFR SRN.
LOUDNESS
CONTROL IFRONT1 LOVONELI REAR1 150E
tie
0068
0;e1
41 10%
±P YE6 2200 0% 22F-10% - -- 0
C23
0k e0% 34 0
08 RR
015 47 MeV
PAA'S-11-. 6805 1071.
22 moo 0. 105
100 PWR.AMP. 330
330" 910%
210% OUTPUT VOLTAGE
LANCE TERMINALS
C6
ADO. R6 000 ZERO VOLTAGE RIPEN vACDUM THE
gt VOLTMETER IS CONNECTED ACROSS THESE TERMINALS.
5Y3GT
10% RECT.
r
RT 41, NOTES:
10%3or 00510%
399ek Tvee% ARROW ON CONTROLS INDICATE CLOCKWISE ROTATION.
350
ALL RESISTORS ARE ±200 TOLERANCE, I/2 WATT, CARBON UNLESS
COY:Pc1
OTHERWISE SPECIE IED.
'20°1:.Eci
4500 v
j504 L 055 ALL VOLTAGES ARE D.C. UNLESS OTHERWISE SPECIE I ED.
3 EA c
ALL VOLTAGES ARE MEASURED WITH POINTS INDICATED TO CHASSIS
WITH AN A.C. - D.C. VACUUM TUBE VOL TmE TER.
C2e 6404±1 0%
DENOTES CHASSIS
0021 00%
28
2204 E10%
FOR
TOP viEw
1.5 mEG
00%
e
5T POS TN
2ND DOS FOR
(4) 300 DOS LP
4TH PCS PIRA
ti
ZENITH Chassis 5B23
5TH POS STEREO RECORD CHANGER
5T REO
6TH POS TARE -FM
L
Used in Models SFD122E, R, W
ieROTOR BLADES ON OPPOSITE SIO 5
ELEcTRIGALEY CONNECTED ON
AxD si. m
112 12187 V2 12AU? 6 805
570 2.8 X 16X
AT AT AT
100014 0 1000% 1000'14
1/2 I2AX7 1/2 I2AU7 6805
1ST AUDIO DRIVER PWR.AMP. 3SP/2'
1'
MMF TWEETER
110%
CIO C12
IC26
47 RIM
C3 56K
33 IMF P-11 ^^A -
310% RIA 710% T110%
0, 2704210% .0022 SP;
2 MEG. - 10'
LOUDNESS 1'10%
WOOFER
82K CONTROL
110% (FRONT) 4701111F
MD
C2 1,10%
.0022 V X
±10%
S3
020. 3P2.
I MEG TWEETER
TREBLE 3300710%
CONTROL IC 29
MFO
(FRONT)
7.10% N ED
C13 RSA ..
t SP.
.0022 !MEG V X Kr
110% BASS < :.0.17!4
CI4 CO el WOOFER
SS
CONTROL IRK!
.0033 '- .01
(FROM enee
STEREO-L.P 10011
STEREO 7.10% T,...-1-
SWITCH ON ........ SRS
INPUT RACK OF BASS 82K ±10% L
(REAR VIEW) TONE CONTROL
NOTE:
JUMPER TO BE OPENED
WHEN SRS -4 IS USED.
CS 1/2 I2AX7 1/2 I2AU7
41 Milt 006 476
710% 1ST AUDIO DRIVER 6805 147 NW
110%
4 CI? C20 /101. PWR. AMP.
ROTES:
IRIS 56.
2 MEG _No% 54 3300110%
ANION On 405T1015 INDICATE CLOCKWISE ROTATION. .047 270K 210% .0022
ISOK LOUCIRESS
ALL RESISTOR ARE :201 TOLERANCE. in WATT. CANNON LLESS '710% CONTROL
OTNERMI SE *Ulf I ED. I REAR I ADS
CI8 00.8 L84 5Y3GT
826 470 MMF
All VOLTAM ARE D.C. UNLESS OTIORNISE SPECIVIED. 110% 710% RE CT.
V X '210%
C6
ALL r01.1A663 ARE KMIEC SITE POINTS INDICATED 13 CHASSIS X C22
WIEN AR A.C.-D.C. VACUUM TUBE VOLTMETER. .0022 C8 R28
210% CIA 01
0047 I RES
±10% ED/77L
110%
40 MFO 1fTREBLE
25V CONTROL 74107%:r NOP 2007
I REAR)
DENOTES CNASSIS --4- R3B
I MEG
En
TEL
C19 BASS CD
0022 T CONTROL C25
(NEAR) /GRAY
±10% C21 TEL
46110% 5600
112K 710% 3W 210%
INPUT OM/VAL 6.31LA.0
7-10%
117 VA C a
FSTEREO-PHONO 75 WATTS aMl
31/2. P M. SPEAKER
C304 1, C308 C30C
1.5 AMP 40 IWO 40 MFD 20 RFD
(TWEETER)
450 V 460 0 350
PROMO MOTOR
/LC. SOCK T
TOP VIEW
SPEAKER TERMINAL PHONO MOTOR
1
DRAT
LOA P M. SPEAKER STRIP A.G. SOCKET
(WOOFER) *1
RECORD CHANGER I
P110110 MOTOR
A.C.CORD PLUG
_ J
3022 P M. SPEAKER
(TWEETER)
JUMPER-"
TO BE REMOVED
WHEN M.4 REMOTE
SPEAKER UNIT IS USED
10' P.M. SPEAKER
ZENITH Chassis 5B27
(WOOFER)
SRS4
Used in Models SF114E, R, W
REMOTE SPEAKERS
DUAL LOUDNESS CONTROL- BASS TONE CONTROL AND TREBLE TONE CONTROL
STEREO MONAURAL SWITCH
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH RADIO CORPORATION MODELS C519W,C,P,L CHASSIS 5C07
4.56 384 11 X 456 7%
FROM AT A7
FROM
ANT l'.--; AT
0ICC 600KC TO 4556C 455KC TO 400'1 400 400.o
.05 WATT OUTPUT .05 WATT OUTPUT
12BE6 12BA6 I2AV6 5005
CONY. I.F. DET. AMP. PWR. AMP
117V IL
ROY
243
CI CI
\ \ 4-"A- 226
_J SP1
C4
C3
=C5 70 470%
\ IATIF .01 470
MMF
L2 (5)
osccoIL
47 ISO
MEG 010%
OVA] -661
SIC CID R2
16
RI .5 MEG 210%
vv. 1W
22 MEG VOLUME CONTROL
L2
OSC COIL
i C8 T.047
1.047
UI 35W4 IUSV
O0 II RECT. Cil A ClIB
.SWITCH C9
II -
161:MFD
a 80MFO
- 150 v
0 VEL 6
RED 4
A.C.
CLOCK
3
0
5005
0 0
128E6
0 00 00
12846 12416
MOTOR
NOTES:
ILK
ILL rOLTAGES MEASURED FROM RETURN
OR rACUUN TUBE vOLTNIETER.
USE ORO NON-INDUCIIVE ELECTROLYTIC CONDENSERS FOR NERLACENCAT. IF Amy 0110
TYPE OF ELECTROLYTIC IS uSE0 IT HILL RE NECESSARY TO ADD CIO 511382 IN DOTTED LINES.
I.F. TRANSFORMER Au1.6!RiRG !TARTS NITH II TERMINAL AS FIRST TERMINAL CLOCKWISE
EITOm MARKER CODE TERm12AL AS VIENED FROM BOTTOM OF CRASS'S.
1.1. FREODENCY 455 KC.
117 V.A.C.
TONING RANGE 535-1620 IC.
ALL RESISTORS 263 TOLERANCE 1/2 RATE CARBON UNLESS OTHERWISE
TI 1ST I.F. TRANSFORMER
DfmOTES CHASSIS
CLOCK B SIITCH LEADS L3 PRIMARY BOTTOM
L4 SECONDARY TOP
Ili
35W4
0
DEMOTES COMMON
I2BE6 (ETON 5-
--6-C1B ANTENNA
TRIMMER
-CID OSCILLATOR
TRIMMER 2/3 TURN AROUND
LARGE PULLEY
SPEAKER 2 1/2 TURNS
LEADS AROUND SHAFT
VOLUME CONTROL- ;1 --TUNING
DIAL CORD DRIVE
T2 2ND F TRANSFORMER
I
L5 PRIMARY BOTTOM
L6 SECONDARY TOP ALIGNMENT PROCEDURE
Connect Dummy Input Sig. Set
Operation Oscillator To Antenna Frequency Dial At Trimmers Purpose
Converter .5 Mfd. 455 Kc. 600 Kc. L3,L4,L5, For I.F. Align-
Grid L6 ment.
2 One Turn 1600 Kc. 1600 Kc. CID Set Oscillator
Loop Coup- to Dial Scale
3 led Loosely 1400 Kc. 1400 Kc. C1B Align Antenna
to Wave Stage
Magnet
169
VOLUME R-20, MOST-OFTEN-NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH RADIO CORPORATION MODELS C520B,V,W CHASSIS 5C09
600 R[
384
f ROY
603 T045540
TROY
4554C TO 400%
35[
AT
05 WATT OUTPUT
2IO
400%
03 PUTT
LI
128E6 12BA6 12AV6 50 C5
CONV. DET.AMP. GI PWRAMP
Sn 3,3 IL
12
T112'176
I 0800. 005
oTS (16 nr
15
SOa it
STY
REG 'V oN UI SERVE
11E SP$ LEROS LOW UP
1 CCOROING 10 THE
I N
I
-1I
MT NO IS SNOWS
I :4TOK.--- I
I :TE4 150
I.150
y22003
2204114
II 1
42
2 2 REG RI 5 MEG
vOLIME CONIIICL
i C4
1041
2 U2 35W4
OSC COO
\SWITCM
RECT. 4.
CS
1 I TEL
1.W.NED COOS
Oi 3() AC
RtD
CLOCK
O ROTOR 5005 12666 124E6 12AV6
ELL
0 =O __J 110V. A.C.
APPLIANCE
COLOR COM SOCKET
ITT VA C
NOTTS:
ALL ROTORS TWASTAID 7401 Carta REBA. TO NOR,: INDICATED
OITA AM A.6.. E.C. N +Ku* TINE IELTIIETOI.
LEA 0413 /TRIM NON-INOTX1141 TIEETNOLVIIC CONDENSEIS FOR
TEPLACENENT.
If AA/ OMEN TTPE ILECT4OLME IS USED II WILL SE REGISTER,
TO NOD CT WON II DOTTED LINES.
1.f. OTANSFORT41101.611,16 STAAIS SITS I TIINTINAL AS TINS(
SPEAKER LEADS
TINTONAL CcOcnist fro- Hiatt COOT 11011uu AS 111040
HATI. El CHASSIS.
f. fRICAIIIIC ASS IL
AAAGI 535-1620 at
1151ST3113 TAO. FOLTARTEI. III WAIT. CARROT ISLETS
015014111 SPTCITIED.
DEMOTES C0.04
RETURN 0- DENOTESASS1
TI 1ST I.F. TRANSFORMER
L3 PRI. BOTTOM
L4 SEC. TOP
RALTERMTE PARTS MAIN 1.11
SOT OSLO SEE SC0EIM110 SEM
IS 12AV6
CIB ANTENNA TRIMMER
I
22
CID OSCILLATOR TRIMMER
T2 2ND I.F. TRANSFORMER
L5 PRI. BOTTOM
L6 SEC. TOP
TUNING
CLOCK AND --
SWITCH LEADS VOLUME CONTROL
vOcuME CON 601
J
TUBE AND TRIMMER LAYOUT
ALIGNMENT PROCEDURE
Connect Dummy Input Sig. Set
Operation Oscillator To Antenna Frequency Dial At Trimmers Purpose
Converter .5 Mfd. 455 Kc. 6b0 Kc. L3,L4,L5, For I.F. Align-
Grid L6 ment.
2 One Turn 1600 Kc. 1600 Kc. CID Set Oscillator
Loop Coup- to Dial Scale
3 led Loosely 1400 Kc. 1400 Kc. CUB Align Antenna
to Wave Stage
Magnet
170
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH RADIO CORPORATION MODELS C624W,C,V, CHASSIS 6CO3
MIT 4T
V
11111
60011Cc. TO 455
O 455 MC TO 4004 O O 05 w1'C'...u/
0
12 BA6 I2BE6 I2BA6 12AV6 35C5
R.F. CONY. I.F. DET. AMP PWR.AMP.
ftv le
104 t
CIA 11
310
4(1 11.1
C3
DI
Cf
7
MEG
Al 5.1 150
v0 NE
CONTU4OL
35 W4 2104.
1104.
RE CT
0
C
.2, O101
LT
OCT COIL
L3
LEL
01
An,. .1":'
50
DSC COIL
ate
).0
Y111.1
OCeCT 0000000000
35C5 iiBt6
n1
iB46 1ir6 niAi
01(0® j40 ALL
4-
0 01P0,13 enaSSII, . at,112,3
AC -Of OA ...Ow
PAO. (0.0011
000.1111,
lu Pao, inOIC1,0 cry
, 10111,4 AO u.t. °MASS C.t0P, Sal(11110.
0®
1As
® 004.0,i nob.
ALL RISIS1041$ Aki 20. IOLERAPICI I/2 .111 JALLSS orm.awist SAC.1.110.
04(Qo 5,4tit - CAPACi1011 ala.011 1.1(110,LAAOS
OSF (*La 11411% moo PAOATift fl,21.101,11( IN,ASIAS
01,.11.1 SAII0110.
11.1,11(0.1,
C) 0 A. OM* MI OP pS 11 VI, AltISSARI ZO APO (11
S.P.Oni I.. aorta LP.I.S.
i.F, TRYCIP.o011 ,A91, WA al 1,101114L, AS 11.51 11AAPPG,
(LOCIVISI. 0,Io MAO, CM 1(.0,4 OS allA10 ,RON M. 01
1A10.1140 ff at !Leila, AAOLI 105 a( 10 420 a..
2/3 TURNS AROUND-\ APPLIANCE
LARGE PULLEY SOCKET
TI 1ST I.F. TRANS.
2 V2 TURNS L4 PRI. BOTTOM
AROUND L5 SEC. TOP
SHAFT
GANG SHOWN IN FULL
COUNTERCLOCKWISE
POSITION
CIB ANTENNA TRIMMER
DIAL CORD DRIVE
/CID DETECTOR TRIMMER
/ CIF OSCILLATOR TRIMMER
CLOCK AND SWITCH LEADS
VOLUME CONTROL -
- SPEAKER LEADS
T2 2ND If. TRANS.
TUBE AND TRIMMER LAYOUT -L6 PRI. BOTTOM
L7 SEC. TOP
ALIGNMENT PROCEDURE
Connect Dummy Input Sig. Set
Operation Oscillator To Antenna Frequency Dial At Trimmers Purpose
1 Converter .5 Mfd. 455 Kc. 600 Kc. L4,L5,L6, For I.F. Align -
Grid L7 ment.
2 1600 Kc. 1600 Kc. C1F Set Oscillator
One Turn to Dial Scale.
Loop Coup-
led Loosely 1400 Kc. 1400 Kc. C1D,C1B Align Detector
3 to Wave- and Antenna
magnet Stage.
171
0.12 10 KIM
o- Si'
*XV, 0021. "" 0
TOM
6 BJ6 I2AT7 I 2BA6
R.F.
I2BA6 12AU6 19 T8
CONY 1ST I.F. 2ND II LIM DISC DET. A ST AUDIO
r- 0 Teo -
oo oxac
L 0 --
TUNING
SLUGS
.-1111. 19
mit AL.GOOMENT
41. WA! NCN
220
In/
I42.204l
20 22
1.I.WiOIDING
ft
35C5
PWR.MAP.
511 10 KA
2214.2
202101
22(
Detail of
IF Transformer
r3rW14."'"
I TURN
DIAL CORD DRIVE
1172/.:.;. POSi7J.012
SHOWN IN FULL COUNTERCLOCKWISE
011012 2011110.2 ..2121,11 40.11422 001.11u.
".". POSITION
r02 1,02 DE UOL221 1022.1.10
171:2
DES1511/1. 1.22 .201. 10.24022.
0011 WHAM, 01221.22 4222111.0
1/2 TURN
1/2 TURN
ZENITH RADIO CORPORATION
MODEL C724L,P,G CHASSIS 7CO2 -I TURN AROUND
DRIVE PULLEY
ALIGNMENT PROCEDURE
DUMMY INPUT SIGNAL
OPERATION CONNECT OSCILLATOR TO ANTENNA FREQUENCY BAND SET DIAL TO ADJUST PURPOSE
.05 Mfd. 455 Kc., 400 BC 600 Kc. L9,10,11,15,16 Align IF channel for maximum output.
0
1 Pin 2 12AT7 Converter t-
Cycle Modulated
1
2 2 turns loosely 1600 Kc., 400 BC 1600 Kc. C6D Set oscillator to dial scale. 4
coupled to wavemagnet Cycle Modulated
3 2 turns loosely 1400 Kc., 400 BC 1400 Kc. C6B Align antenna stage CD
coupled to wavemagnet Cycle Modulated
rr
4 (a) Pin 1 (grid) on 12AU6 .05 Mfd. 10.7 Mc. FM L17 coil slug Align primary of discriminator for
Unmodulated pri. discr. maximum reading. $1) O
limiter
Pin 1 (grid) on 12AU6 .05 Mfd. 10.7 Mc. FM L18 coil slug Adjust secondary of discriminator for
5 (b)
limiter Unmodulated sec. of discr. zero reading. 0-.) 0
6 (c) Pin 1 (grid) on 12BA6 .05 Mfd. 10.7 Mc. FM L13 & L14 pri. & Align 3rd IF transformer for maximum O 0
U)
2nd IF Unmodulated sec. of 3rd IF trans. reading. 1-3
Pin 1 (grid) on 12BA6 .05 Mfd. 10.7 Mc. FM L12 2nd IF Align 2nd IF transformer for maximum
7 (c) Oq
1st IF Unmodulated trans. reading. CD
Pin 2 (grid) on 12AT7 .05 Mfd. 10.7 Mc. FM L7 & L8 pri. & Align 1st IF transformer for maximum 1-3
8 (c) sec. of 1st IF trans. reading.
converter tube socket Unmodulated
270 Ohms 98 Mc. FM 98 Mc. L4 osc. coil slug Set oscillator to dial scale.
9 (c)
Antenna Post FM Unmodulated
(Remove line ant.) 270 Ohms 98 Mc. FM 98 Mc. L6 det. coil slug Align det. stage to maximum reading.
10 (c)
(d) Unmodulated L'21
C:1
Correct alignment can only be made if the following procedure is followed: TIB 1ST. I.F. TRANSFORMER txl
T2 2ND I.F. TRANSFORMER
PRIMARY
A vacuum tube voltmeter with an isolation resistor of 2,000,000 ohms in --L 12 10.7 MC BOTTOM
series with the hot lead will serve for FM adjustments. This lead should LIO SECONDARY
L II 455 KC TOP co
be shielded. (3)
The signal generator output should be kept just high enough to get an TI A 1ST. I.F. TRANS T3A 3RD I.F. TRANSFORMER O
indication on the meter. .-L13 PRIMARY
-L7 PRIMARY P:J
(a) Vacuum Tube Voltmeter Lug 7 on discriminator transformer to chassis
(half discriminator load). L8 SECONDARY LI4 SECONDARY
(b) Vacuum Tube Voltmeter Lug 5 on discriminator transformer to chassis
T4 DISC. I.F. TRANSFORMER itZ)
(full discriminator load).
(c) Vacuum Tube Voltmeter from Limiter Grid to Chassis. LI7 PRIMARY 0
(d) Loosen Slugs by applying a hot iron to the cement.
LI8 SECONDARY
An AC output meter connected across the primary or secondary of the Lj
output transformer will be satisfactory for all AM adjustments. Pzi
T3 8 3RD I.F.TRANSFORMER
L6 F.M. DETECTOR 98 MC -
LI5 PRIMARY
Lib SECONDARY
C6B BC. ANTENNA TRIMMER 0
1400 KC
C6D BC. OSCILLATOR TRIMMER -
1600 KC
0
L4 F.M. OSCILLATOR 98 MC 4
I
F TRANSFORMER CORE POSITIONS
ARE AS FOLLOWS
TUNING'
PRIMARY ADJUSTMENT BOTTOM ON -OFF SWITCH AND
SECONDARY ADJUSTMENT TOP SELECTOR SWITCH LOUDNESS CONTROL
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH RADIO MODEL C730, E, R, CHASSIS 7C05
The schematic on this page is exact for models and chassis listed above.
Zenith Radio Models C725C, F, L, Chassis 7C06, are practically the same
electrically and this diagram will serve. For alignment and dial stringing
information for both group of sets refer to material on 7CO2, on page 173.
tr.?'
op
L___J L _J ,v..1
i6F !-
;18
(S I
MIS S ax_
fL
L
CO is
Or 6
,
o
L___J
El
8 2
cg
u.
174
90 a FR01160011 10 .55.11 AT 400 a( 101 1901. fu Iv ar 400,
"' 0 92 FROI 11119C 10 10 /Of I 9.111 0011,11
11 hi 10/ AC
®
6BJ6 6A B4 I2ATT 128A6 12BA6 12AU6 19T8
RF. A.F. C CONV. 1ST I.F. 2NDI.F. LIMITER DISCR. DET. &
1ST AUDIO O
re
II `4.
PP CD
EA
61
69 Mas 4.1
5
ear O
04' 29
CD
ar
roai oFo w
hai
5 al CD
CD
00
1
100
R2
411114
U
TOSOO
001 424 429
osx
WA
511F
01
41-1 Dq
Si IF
,_0000
4,11
xmD
101111F Fl
goo
35C5
PWR. AMP 5
112101
IZ: ON CONTROLS 1110i Carl LOC.
tiC71VOVI.rEraTte%1M11(0"5'111'1''F5"'"""
uell(51 0117.1.15ITSPI(IF CO
ALL r01.1445 191 0
Lla:VOVe4Weetertr5VEniTOL""".
e F9111 455KC
01., MOO V:r
7ukiee0.:14[;11020:1.5111 If
4
V:01:4Zre ZSnXS M,""
0"' 0
COOED 577011211
105 F Ka Ft Om C42
3110 1.05 FY Al OFF 21 0047 gerlitCrinV
0[110115 C455i5 /ONO, C00011111025 01.1.
5520.1101. Ole 52042
002 aF
Il CD
1919 -I
DIX DV .[0 000
51 AUDIO 0 4
CL
wpolw2m 1101°00 SsEi
0
0 0 0 0 0 0 0 0 0 0 0 0 o
C5
..?
.
A, ler
Cra
0 CD
0
0 10 Wane,.
_2,4_41
0 11111.1 5141P
F [001[110
1 !eral 2001.01. 91 C:7)
ktV:
0 0
Schematic above is exact for Zenith Models C835E, H, R, Chassis 8C01. For alignment
see page 176. Models C845L, M, W, Y, Chassis 8CO2, are practically identical.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
THIS SPRING ON BACK
OF LARGE PULLEY
PULLEY SHOWN IN I1/2 TURNS AROUND ZENITH RADIO CORP.
FULL COUNTERCLOCK- \ PULLEY BONE TURN
WISE POSITION / AROUND RIVET
© Models C835E, H, R, Chassis 8C01
1
Alignment Information
(Schematic diagram on page 175)
1/2 TURN
Models C845L, M, W, Y, Chassis
DIAL CORD DRIVE 8CO2, are practically the same.
2 1/2 TURNS --
1/2 TURN ON STUD
NOTE: CODED STEREO PHONO-RADIO SWITCH
SPEAKER LEADS- ------**0 o I 0
7-^
MUST BE CONNECTED 0
TO CODED SPEAKER V,i 0
- C21B4 j)38(AcNT.
Ate= TERMINALS.
I I
STEREO
OVA T2A 2ND I.F. TRANS. SPEAKER
C I Illii .__J
LII PRI.
L12 SEC.
INPUT
PHONO
INPUT
TIA 1ST If TRANS.
' C2E BC OS© L7
L8 SEC.. T3A 3RD I. E TRANS.
1600 KC
LC2D BC DET.
1400 KC.
.- p .,.- LI5
L16 SEC.
PRI.
<1%7
/7"
/. .4A
TIB 1ST 1.F.TRANS (0
L9 PRI.- -___
LIO SEC. T4 DISCR. I.F. TRANS.
- --.0 1
U (---,,- LI9 PRI.
I, 455KC j
10. 7 MC ] IC 7 C 10.7 MC
--'
MT MC)
L20 SEC.
4.' n -) 0.---- ..
T38 3RD I. F. TRANS.
L2 F.M. ANT-'
98 MC.
L3 F. M. DET.
_____-_-__
AA
W
41111:11
/
---....
/--r
/.
)'s
'
\
455 ile',t......
--....,:--
--
455 n C '
"=-.---' --'
LIT PRI.
L18 SEC.
T2B 2ND I.F TRANS
IRo-
98 MC. ' LI3 PRI.
L6 FM OSC. I== 0 "\ \\\ -....
411) L14 SEC.
98 MC. aim \\\...,\\
I \\
,
-.T.....?..
w.d, ,,eLx
, '-ON -OFF SWITCH B
TUNING ',1,6d TONE CONTROL*" 1-___:7,.7,-1, -7 LOUDNESS CONTROL
c"' ELTATEcTIc.
LEADS TO SPEAKER.i S
1
, ,
WHITE LEAD MUST 1 SPEAKER
BANDSWITCH CONNECT TO WHITE ! (TWEETER)! I.F TRANSFORMER CORE ADJUSTMENTS
CODED TERMINAL ARE AS FOLLOWS
ON SPEAKER. PR I MARY -AN. BOTTOM
SECONDARY-ADJ. TOP
ALIGNMENT PROCEDURE
DUMMY INPUT SIGNAL ADJUST
OPERATION CONNECT OSCILLATOR TO ANTENNA FREQUENCY BAND SET DIAL TO TRIMMERS PURPOSE
1 Pin 7 12AT7 converter .05 Mfd. 455 Kc.' 400 BC 600 Kc. L18,17,14,13, Align IF channel for maximum output.
Cycle Modulated 10,9
2 2 turns loosely 1600 Kc., 400 BC 1600 Kc. C2E Set oscillator to dial scale.
coupled to wavemagnet Cycle Modulated
3 2 turns loosely 1400 Kc., 400 BC 1400 Kc. C2D, C2B Align detector and antenna stages.
coupled to wavemagnet Cycle Modulated
4(a) Pin 1 (grid) on I2AU6 .05 Mfd. 10.7 Mc. FM L19 Align primary of discriminator for
limiter Unmodulated maximum reading.
5(b) Pin 1 (grid) on 12AU6 .05 Mfd. 10.7 Mc. FM L20 Adjust secondary of discriminator for
limiter Unmodulated zero reading.
6(c) Pin 1 (grid) on 12BA6 .05 Mfd. 10.7 Mc. FM L16,15 Align 3rd IF transformer. for maximum
2nd IF Unmodulated reading.
7(c) Pin 1 (grid) on 12BA6 .05 Mfd. 10.7 Mc. FM L12,11 Align 2nd IF transformer for maximum
1st IF Unmodulated reading.
8(c) Pin 7 (grid) on 12AT7 .05 Mfd. 10.7 Mc. FM L.8,7 Align 1st IF transformer for maximum
converter tube socket Unmodulated reading.
9(c) 270 Ohms 98 Mc. FM 98 Mc. L6 Set oscillator to dial scale.
Unmodulated
Antenna Post FM
10(c) (Remove line ant.) 270 Ohms 98 Mc. FM 98 Mc. L3,2 Align detector and antenna stages for
(d) Unmodulated maximum reading.
176
- WA AT 0.7W 77 l AT 0./ NC
cewTl:i situ SAN AT 435gt 0W11
i7 AT 140 AC ):) I
erou IC AS, aC .xl .0 12A107 6.05
5011 AT IMO, --4/4C10--ILSI AT 1000, 0 007 PVT
Ag
501 /I 000, It AT .000, -SS A AT ICClN. 011TRIT
I2AT7 6AB4 6AU6 68C7 1/2 I2AX7 1/2 12AX7
AFC. 68A6 68A6 LIMITER FM DISC- A.M.DET. 1ST AUDIO
CONV. , 1ST AUDIO
1ST LE 2ND I.F.
I
IMF MI
C.
0:15C
ID -J
7S LIS R..
aY
Li
CIS cn tn CIS
LS
01 01 01
G2
O
r u7 IL/ RI RA
1400 nl
rg."'"
novo. L
220 10011 L-0
loo C34
ClO CIO
SIO r, 1/11
C34 Oa 001
01 no S CV 5101
tg .047 !ICS
444 V. 1011 551 00$ *IA 211tg
INF FT C/4 LOKIIIFSS CONT0OL
NILS 211114
e14
C311
004?
ANA /
20 AV NO%
OY
1/2 12AUT
2ND AUDIO V2 I2AU7
ig C. 00 Me 4S.
HO% 2ND AUDIO Lagw551 Cw7
25 MHO% /.
.c 070
ox i.C.0111
0' CCit5qT1
CSC t'50 *oilCH
Aea
---( 1505
T0T'7717/
/MHO, 10. CIO* 1
ea 3,
on (Ss 111.111
SI-2F SI-SR CS2 211
-CS,
OA
of qM
..0W0
S400/0/4
AlC2f, CO41.0910 SI-IR 01 \ sea
51-2R - MOM/ HOS
114, 41114
---
1
334 -
434
J.43 / OAS5
tpt2\ Tx."'
ifg MS 1A11
on
IfnACIA 17. ,T33 int.1,10 1.
1 9826
I Ica
10030101 1101./ X. /11, /1/ MAIN CHASSIS
HT PCs. - PRIC 7=-P-
No KC AA
20.1101/
LS
: t. t A/C
SC OSC
Ago HOT-
I
Fig RUG
AGM.
4.1.3 1.5.O: 741°
avg. boo. I., Hog .gs
.L .r
..ALTASIS .0.4111.1. :01011 1111411. IL 1,011111 1,101110 I.
11.411 /01111311X.
A11 101.13 101 3.< Mx. 4111./St 5.1< if 110.
Tgi r LEFT-
:1r/."rgo'Xogrolr.Y."'' "" ""'""'"'" " 6805
004 PWR. AMP.
s are ro. toxick.Ht. 1// VIII 4450. 103,33 am A. / sr ii7v At .77 TT. (SO Vito 505315
Y2 *0713 n
"VC.'
En .tT ,0%
r015.114.3A3313 100.02g .1_71
tr 'IM,175.707
FAA Oft
.113 0.
77
ZENITH RADIO CORP. Gag
1=1 TS.!
5U4GB
5.5
Model SF2530, Chassis 9B26, 3B32 goo.
REV,.15
Rohn
XIX 2200
Per &stop.
(Alignment information on the next *AL
l5. 550 RIGHT
6805
40/
PWR. AMP.
page, over) .140.002 IM 3832
AIN
POWER SUPPLY
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH MODEL SF2530 CHASSIS 9626-3B32
Alignment Information (Continued from page 177)
/1/2 TURN
-.N.- Jr. ..... ---......--r-1.-..,.....j- ! SP.2
0 0
-ti
_1 Obi! I S. PM. SPEAKER
I TWEETER I
(
,..
I
DIAL DRIVE SHAFT SHOWN IN
FULL COLINTERCOCKWISE
ROTATION
_...
i 0 ---
(---1---
--
A.C. CORD
I:
tz...
woo
W.I4
SP I
12. PM. SPEAKER
(WOOFER(
LEFT
..-- / 4
SPA
FIRM RMA II 12.P.M. SPEAKER
I COMPLETE TURN a
(WOOFER)
AROUND SLOT
INA TURNS AFTER SLOT _--I P2 TURNS .1 ' J
_/.-----''
- LEFT
I
SP3
RIGHT
2112 URNS AROUND PULLET ON
5. P.M SPEAKER
NON 0000 SNITCH DIAL CORD DRIVE ,- _ RIGHT
4.RADIO (TWEETER)
73 2ND I.F. TRANSFORMER ---- .---
L12 PLATE COIL BOTTOM 10.7 MC.
T4 3RD. F M I.F. TRANSFORMER ', CODED SPEAKER LEAD MUST BE CONNECTED
STEREO PHONO INPUT
r--
.,
L14 PRIMARY BOTTOM TO CODED TERMINAL ON SPEAKERS
L13 GRID COIL TOP 455 KC.
------\ , L15 SECONDARY TOP
T2 1ST. A.M. I.F.
\\ TRANSFORMER -T
L 10 PRIMARY BOTTOM
L I I SECONDARY TOP / //7
/ / 4 ---'
-----\ 6 DISCRIMINATOR TRANSFORMER
L18 PRIMARY BOTTOM
__ L.19 SECONDARY TOP
t r,
T 1 1ST F.M.- I.F.1.F. TRANSFORMER -
! !Ca \ .
nom50 n , .,
, AUDIO 7 PRONG
-
.
LB PRIMARY BOTTOM CONNECTOR PLUG -
r./
0
10v11L
L9 SECONDARY TOP 7
',.*,.
SO SO
0 o0
0,0 ,,,
Il
r
VW 0 OS ..---
LOOP CONNECTIONS
00 K
--
--------Th,'''',
'.' -14K-ItaL III CZIO
- 9 CONTACT POWER
SOCKET AND PLUG
1
FUSE
L7 F.M. DETECTOR COI L- !IIM.:-' - TO 3RD I.F TRANSFORMER
98 MC. m -
L 16 PRIMARY BOTTOM ,i -RECTIFIER
Z 1 elMINN -...
7 SECONDARY TOP PHONO MOTOR --- o
C58 B.C. ANTENNA TRIMMER
-.
I SOCKET
1400 KC.
yilIIINNO
II..,A' ,,
o 1
650 B.C. OSCILLATOR TRIMMER 1E1E2 .,....._ _____it,____,A._,_
tim-..011:1111p11___ 7 CONTACT
1600 KC.
1.,--Ir. , .. 4
,
,-) 15
CONNECTOR
SOCKET
L4 FY. OSCILLATOR COIL- i ,.
98 MC. I DIAL
LIGHT
DIAL
LIGHT
Li
i
DIAL
LIGHT TREBLE TONE CONTROL
SPEAKER
TERMINALS 12
L
1
PRESENCE CONTROL O
TUNING /
1- `i
PULLON PUSH -OFF BASS CONTROL
SELECTOR SWITCH ----- -LOUDNESS CONTROL
/I
RECORD COMPENSATOR SWITCH ---
-STEREO BALANCE CONTROL P ,
9826 3832
ALIGNMENT PROCEDURE
INPUT
CONNECT OSCILLATOR TO DUMMY SIGNAL BAND SET DIAL TO ADJUST PURPOSE
ANTENNA FREQUENCY
I Pin 2 on 12AT7 Mixer .05 mfd. 455 Kc., 400 AM 600 Kc. L10,11,13,16 & 17 Align I.F. channel for maximum output.
Cycle Modulated
2 .05 mfd. 1600 Kc., 400 1600 Kc.
TWO TURNS LOOSELY AM C5D Set oscillator to dial scale.
Cycle Modulated
COUPLED TO
3 WAVEMAGNET .05 mfd. 1400 Kc., 400 AM 1400 Kc. C5B Align antenna stage.
Cycle Modulated
4 IMPORTANT: Before attempting to align the FM portion of this receiver the Band switch should be turned to "FM".
5 (a) Pin 1 (grid) on 6AU6 limiter .05 mfd. 10.7 Mc. FM L18 Align primary of discriminator for
Unmodulated maximum reading.
6 (b) Pin 1 (grid) on 6AU6 limiter .05 mfd. 10.7 Mc. FM L19 Adjust secondary of discriminator
Unmodulated for zero reading.
7 (c) Pin 1 (grid) on 6BA6 2nd IF .05 mfd. 10.7 Mc. FM L14,15 Align 3rd I.F. transformer for
Unmodulated maximum reading. '
8 (c) Pin 1 (grid) on 6BA6 1st IF .05 mfd. 10.7 Mc. FM L12 Align 2nd I.F. transformer for
Unmodulated maximum reading.
9 (c) Pin 2 on 12AT7 Mixer .05 mfd. 10.7 Mc. FM L8,9 Align 1st I.F. transformer for
Unmodulated maximum reading.
10 (c) REPEAT STEPS 7,8 & 9
11 (c) Antenna Post FM 270 ohms 98 Mc. FM 98 Mc. L4 Osc. Coil Set oscillator to dial scale.
(Remove line antenna) Unmodulated Slug.
12 (c) Antenna Post FM 270 ohms 98 Mc. FM 98 Mc. L7 Det. Coil Align det. stage to maximum reading.
(d) (Remove line antenna) Unmodulated Slug.
178
121- 54 121-67 121-113 121- 52 121-19
MIXER 1ST 2ND I F DRIVER OUTPUT
T2 73 MATCHED PAIR
1
0 14 -6 0 v 75
1 RL
=250 t 1 - 14W
MMF -5.0v Si
1.22
LI 40
1.4 140.11
14.11 LOLL
CI
3 MFD .01
747V 120 775Y 140.11
120
±10% SPI
XI
RI 5K C14
C6 10
34r\ VOLUME
.05 1-10%
CB
CONTROL VEL
.05 =
C7 CO C10 220 # Cl2
50 rLI
37 ir MED
.02 6 V
4700 14v 121-19
/1056
I 6.
OUTPUT
22K 3300 i330 ±1N 3900
^VV, ±10%
MATCHED PAIR
C2 010% 010% RE
;3900 47K
.05 et10%
110%
C3
C20 100
.02 150K 470
±105 50 mFD SWITCH ON
6V VOLUME
CONTROL RI
CI6
16 MED Ern6V
ZB BATTERIES O
3V / 106 REQUIRED N
.1 76 DIAGRAM FOR 7CT4OZ1
CIC ft10% .14
.0155
0
6 5J1 CID 47r
7A COLLECTOR
C17
- 121- 53 These transistor portable chassis are conventional BASE
7IZ
II -,07
05 47O0 superheterodyne receivers using an individual mixer and EMITTER
OSC.
LA. 5, 12 oscillator to produce the 455Kc intermediate frequency.
CI8
Chassis 7CT4OZ1 v, 7CT40Z2 are virtually identical COLLECTOR
0 001 CP3 except for different transistors and a few other parts. BASE
I
() I_ EMI7-ER
The parts marked by astericks on the chassis wiring
and component drawing apply only to chassis 7CT40Z2. PNP TRANSISTORS
ALIGNMENT PROCEDURE NOTES:
CARBTA. t/2
Input Signal Connect Inner Conductor Connect Outer Shield
From Oscillator To Conductor From Set Dial At Trimmers Purpose ALL VOLTAGE' AEC ;,C. DAMS CinTRWISE
Operation Frequency SREC I F I/O.
Oscillator To
ALL CONNNSERS tkt 101 MICRCTARADS UNLESS
OTHERNISE SPECIFIED. P:1
1 455 KC Chassis 600 KC Adj. T1, T2, For I.F. 0
D.C. VOYAGES WA. ARE MEASURED FRO. CRAWS
T3 for maxi- Alignment NIT8 Ar SISMAL LS IEJ AN A.C..D.C. OR BACULAt
Rt
ONE mum output. TLBE vCI.TmETER.
TURN -1- JEW/5 CHASSIS
C1C Set Oscillator t\D
2 1620 KC LOOSELY Gang
wide open. to dial scale.
COUPLED
T2 73 76
TO Set Oscillator GROUND LUG
3 535 KC Gang Adjust slug TIl GROUND LUG
WAVEMAGNET Closed in T6 to dial scale.
06 10 06 10 06 10 06 10
05 05 05
4 REPEAT 04 311 04 30 134 30 04 30
STEPS 2 & 3
',...GROUND LUG
5 1260 KC 1260 KC Align loop ant.
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH RADIO Chassis 7CT40Z1 & 7CT40Z2, Model "Royal 275"
(Service material continued from page 179)
CIC OSC. TRIM.
MATCHED PAIR
CIA ANT. TRIM.
GANG
TO GANG FRAME
121-5L
LEGEND
T3 3RD I.F. TRANS.
8 -BASE * INDICATES PARTS USED ON 7CT40Z2
c -COLLECTOR CHASSIS ONLY.
T2 2ND I.F. TRANS.
E -EMITTER j!1 °)
T6 OSC. TRANS. 4y
1
5
TS
000000)
95-1519
AUDIO OUTPUT I
121-74
:s
6:1
TRANSFORMER L- -1 121-113
121-64
TI 1ST If TRANS.
121-62121-54 '------- "1
121-19
*121-61
OUTPUT
"444.4
EARPHONE JACK;
TRANSISTOR & TRIMMER LAYOUT
T4 T2 FOR CHASSIS 7CT40Z1 & 7CT40Z2
95-1518.1 95-1601
*95-1595 121-67 121-53
1
2ND I.F. /- *121-73 *121-65
- TRANSFORMER / 1ST I.F. OSC.
r n A700
r re
t`v^,,,..inA.,
t
11111"ji. I
121-52
C6 Die-.041(
*121-64
IF1). PO
DRIVER mFD
J(00 ;1;5."IF11-.411P('.J
-
I . .7,1c MFO
LEr' _ _ J900 40''A IHO
410-14VA
4, 0
$ ,Mt
'i.0,( \/\.:V r -- 95-1675
*6R )0%-"4111-1 *1: ..0.,, i
*95-169(
SCA 1107
r- -- J111_ _ --I °°' l'ill
A OSCILLATC
i 6 ',
C12
.5
1
TRANSFOR?
$0 Ml ,
r - - -- - -,:-.1J
1
r--- I C
f
7' ot i
+ Ma I F I I
C I AN/
02 MF ...i
..,, -,.
I 11. rE
/wli ..d.t.+2,...:._ .3
'SC
*,..4 - 16 MFD
..
T3 .i C2
$ MF
95-1602 L 6 _5- MF
*95-1586
3RD I.F. 40-1 (20
>> M F
MFO
121-113 T1
*121.-74 95-1600
2ND I.F. *95-1594 121-54
1ST I.F *121-62.
TRANSFORMER MIXER
CHASSIS, WIRING AND COMPONENTS VIEWED FROM WIRING SIDE
180
*121-73 *121-74 * 121-64 * 121-61
121-104 121-105 121-106 121-107
* INDICATES PARTS USED ON ID 0 00 .-3 DI 41
DRIVER OUTPUT -ct Ca
1ST I.F. 2ND I.F CD
-60 I. .0 - 07, (-) ="ID- .0= 0. DO
8CT40Z2 CHASSIS ONLY.
TI T2 13 470 C25T.
17.11 -lov T4 i-m ar ... ...3
.<
`, 0
5600210 6.... A. t=,..Fra tj.t. 0 =ay it,
1EI )
1
C12 250 C16
'
250 n0 f, :
12 NMI MM r 3 MED
0 (,-"
L BMW N:: st .
Li 12V4047
o 3 133
D LJ
< o= w
ji50 20 : ,....
1 10% a :
56
1
UNE co .oliT2
CONTROL . II .;
..
-1-C18
L_ 4700
T
=
co o
: e: ; aI'
...."
''''' im .".
L_ 0 c-- - 0 10% 10
*121-78 \ *121-62 10% rfi 09 .g.- fa ci; , Po O
121-103 SPI .1
121-101 \ 55V
R.F. MIXE R
'",_ 0' - 'iii" c z.r. 0
00 01 m (1 no,
Ci7
\\ -,, cr-
-6417
50
.-1C11 'OK
1107. MED 20
0 , -.
.-3 :11
'' (D
6 0
.f. 6:4 il:
C 2'1'0% CIO 6V tn
.fa. as. .0 ,,,,K
, *1004
C9
05 102
C13
C14 4700
aED
,_, ....o
,,,'"" 0 itt .... ft. " M. 0
rm pp al 0 4-4.
.--J
":, ,_.: ,_.,
.
1-3
470 05 -40 t.,..) to = ID a a
1806 02 IDS 110 a) 02 .-. 0 0 `'
210% VOLUME OUTPUT = ..< 0. 41
Q O
CLa-i (,)
270010% 0 M0 (')Ds CD
__CONTROL
27 0% 330 6V o a' 2 =- ,..q. ,. tri
2-8 BATTERIES
47, 4 REDO
c .,1
a .0 la. vj s' -,M
0% qa a) 'e, co
.... rt.
2200 00 p. ra a
110% 41 0 at 0r.-0o
= 0, 0,-.. ,c
r p0, -0..00 tzl
EL mr .'
I -I 0 ID CD tri
C5 _ CI8
.1 X...." 46 ... CL 0
R3 a tv- CD 0
470 SOMED C24 ""-
111v4ED T6 6V c. ... gi, = tri
=
*121-65 ; ; 0.2 E. ci,"' 171), Sm.
121-102
10 OSC.
0
TIE POINTS ALIGNMENT PROCEDURE
0 30
0
Input Signal Connect Inner Conductor Connect Outer Shield
21 Trimmers
GROUND LUG 42v f PA Operation Frequency From Oscillator To Conductor From Set Dial At Purpose
T2 0 Oscillator To
05
4700 MM. _ _ _____
06 I0 3417
05 05 22 Chassis 600 KC Adj. Ti, T2 For I.F.
1 455 KC
04 30 04 30.7 T3 for maxi- Alignment
C23 mum output.
-I I 001
01
GROUND LUG
T6 C1C Set oscillator
2 1620 KC
16s-'10 w?,:lnpen to dial scale.
06__ 10 ONE
05 05 600 KC TURN Near Adjust slug
PNP TRANSISTORS 3
out-
--
30
600 KC inn .Ad.luimu.
34 30 04 LOOSELY
COLLECTOR
put while rock -
GROUND LUG
1- COUPLED
645E TO ln/ itan. Tunaimaximum
EMITTER
WAVEMAGNET output regardless
of dial accuracy.
1.±- COLLECTOR 4 REPEAT -
STEPS 2 8i 3
BOSE
EmITTEa
5 1260 KC
-- 1 260 KC CIA Align loop ant.
-
T5
CHASSIS INFORMATION CHART
NOTES
ALL RESISTORS ARE I/O WATT,CARBON.120% TOLERANCE Translator
UNLESS OTHERWISE SPECIFIED Chassis Layout Part C
714 0001 R.F. Mixer Om 1st I.F. 2nd I.F. Diode Driver Output -Output
ALL VOLTAGES ARE DC UNLESS OTHERWISE SPECIFIED Chassis Color Dot Label No. Supplier
Color Detector
ALL CONDENSERS ARE IN micROFARADS UNLESS OTHERWISE
SPECIFIED
DC VOLTAGES SHOWN ARE MEASURED FROM CHASSIS WITH ND SIGNAL
5P2 8CT40 Black ' Black Zenith 121-101 1214 03 121-102 121-104 121-105 103-19 121-106 121-107 Sylvenia
102.6283 E.I.A. 20544 214411 20409 20409 20409 114870 20407 219407
USING AN AC -DC CM VACUUM TUBE VOLTMETER
USED ON SCTIO ONLY Typo PNP PNP PNP PNP PNP PNP Matched Pair
DENOTES CHASSIS PNP PNP
8CT4022 Red Red Zenith 121-78 121-62 121-65 121-73 121-74 103-19 121-64 121.61 R.C.A.
102-572. E.I.A. 214544 20411 20409 20409 20409 1N87G 20407 22/407
Type PNP PNP PNP PNP PNP PNP Mat died Pair
POP PNP'
DIAGRAM FOR 8CT40 & 8CT40Z2
LEGEND 1 4 AN' TRIMMER
121-107 B BASF ci
* 121-61 .4121--161
C COLLECTOR 121p7,
MATCHED PAIR
OUTPUT F EMITTER
MATCHED PAIR 43 .scs
. CSC TRIMMER
Tz
4121 74
121-101 0
0
T5 T ; t $T 1 F TRANS *12I-62 IF
121-103
95-1519 04121-73 0
121-104 *121-64
AUDIO OUTPUT ' 3 3RD !
121-106
F TRANS
TRANSFORMER 04121-65 4-6:!- 74 C
121,102 121-105
6 DSC TRANS
T4 T2 2ND F TRANS
95-1518 Ti
DRIVER 95-1585 EARPHONE I
TRANSFORMER 1ST I.F. ACM
4z TRANSFORMER
,
121-103
121-106 L *121-62 TRANSISTOR EL TRIMMER LAYOUT 121-101
*121-64 MIXER * 121-78
DRIVER R.F
LOOP
GANG
OSC
FD
-0Iu'° 470 4.14A
1 VA
I 4 2, O
*1T 1 Pl V1/110"..AM
CI7 I F- LOOP "A"
7f
4< 30 /AK) SC
0 ff 7
r itiTS
r r CD
O? co
plODE T6
95-1589
OSCILLATOR
TRANSFORMER
7. MMI
CIS
T3 SO MFD 121-102
C15
95-1586 * 121-65
02 MFEI
3RD I.F. OSC.
TRANSFORMER 121-105 T2
1
* 121-74 95-1584 L2
2ND I.F. 2ND I.F 95 ISIS 3
TRANSFORMER RF COIL
CHASSIS, WIRING AND COMPONENTS VIEWED FROM WIRING SIDE
121-113 121-67 121-120 ?ZOO C.,0%
121- 5 4 12 T3
1STI.F. DRIVER
E CiP
CO NV.
0 IOY
T4
Jn [ 121-19
T"' .1 31
O 14.,30 - OUTPUT
11
®T '" '""'
ci) iGI MATCHED
- -0- - -0-J 120 I
0 .10
3.6 < PAIR
2
C12 0
1508
SI 33 ±47
3500
C5
SR
ED A
2700
05 02 VOLUME
aJ-
,,, CONTROL 4700
210 % 710%
3900 470 CD
11-4 121-19
710% 1680 05 1500
2700 221 110%
OUTPUT
RIO% C3 1206 .110% O
005 C1F11 0082 MATCHED PAIR
'AA
±10% CI7
T 02 - C14
50 MFD
152 50 MCD I. 6v
6V
*10% VOLUME O'C'ONTROL
.001
109
I OR
02 BTU CD
2 10% TIO5600% T64OFD 6V
PNP TRANSISTORS Z7 BATTERIES
4 RECI'D CO
COLLECTOR 110TE3:
ri of=.
BLUE DOT T2 T3
pi T,
0D L" 6-4ROUND LOG Ill IlltIPTCPS AP( CAIRO., In PITT,DO: 101.011021 MISS
EMITTER O
06 6E 1 01061. 11( PRIAM.
16 0 06. if 06 ID
401 000114(3 AN( D.C. MESS 01(6110,13E 380011110.
TS / 20 05 05
0 COLLECTOR Alt 00001.3101 Al( I. 4iC114(111.05 100035 014(11.131 SPEC If il c CD
0 4 30 4,
34 31 30 04 30
CIO 114/ WCIC Ilt 1 ,-BASE D.C. 00mTAGES WI. IRE m6.5uPED F.OP CP43313 110 00 316PA,
05 16i.4 AP I.C.-D.C. 00 VACUUM NU 1000F1EP.
I '-' EMITTER
® is"GROUND LOG
D100116 CPASSIS
WHITE i -
SCHEMATIC DIAGRAM FOR 6CT41Z1 BLACK 1-. 0 1. .6.1 to = .., .7 i 0 ra Min ...)
D .-, A3
ALIGNMENT PROCEDURE
°00 =eD ° a. - o7).0i a0 cn ...
" la= a-
cn
0.<5.0. to r (n. <,....,4.mcn cp
(CD ,-,, o "4.
ri,
Connect Outer Shield
0. a. - 0 0
Input Signal Connect Inner Conductor O 0 ,... 0 g.-= CD CD
From Oscillator To Conductor From Set Dial At Trimmers Purpose ...... s Q. 0 °-^0
Operation Frequency r co.--.
Oscillator To ao - 0) V) O. 0 En
Ct. 0 ... 0)
1-. at 0 Ca. N.
'-ON-OFF SWITCH & C. r C ... P. 17), n '< w
1 455 KC Chassis 600 KC Adj. T1,T2, For I.F. VOLUME CONTROL
T3 for maxi- Alignment C7. 6.:
ONE mum output. 1-
rq- 0cri: Ca
g. P" ,
yl 7. e-... CB
TURN EARPHONE JACK CJ' 0: a. v
2 1620 KC Gang CIC Set Oscillator ,otiEnt
i-.- o
LOOSELY (D o 0'0 .° C, -I,
:r (n ..e7 = CD ,
to dial scale. FD
COUPLED
- wide open. .....
"") 0
Cl) 1-., 57: 0 (.3
C...) co (A ...
" (it <a,
,...
TO Set Oscillator .-. cn'" C- r1+ cr2)
3 535 KC _ Gang Adjust slug ,...,. on 6a a- (1, E.
WAVEMAGNET Closed in T6 to dial scale. CIA ANTENNA TRIM.- -1 C 0. 0 0 -... CD X r cT,
SW CL 0
...
" ,.- `-...
CIC OSCILLATOR TRIAL7 1
12-19 O O C& 2) ,-.,-... 0" 5 0 5 _.)
4 REPEAT - - - - 0 IMMI9ED /ego
STEPS 2 & 3 ,
[-TUNING CD 0 En
0 >4'2 " 0- > 5:
0. ..,
- 1260 KC CIA Align loop ant. g .-0 t -a3 ---.
,-
5 1260 KC CO
..... 0 a ..
WI -6) m 1.r, ,
,. 0, 0--, (1 a) -0 o ,.a, 0 cD.
:" "6 =" "' 11 :.... p?
-, as
CHASSIS INFORMATION CHART no- ul,>:: .....o< 71.1 9, D., R. kn. .6-
a r) ti: °M
(n 510" 11 ..4-2' '..1
Transistor ....0 <
.-. A) CAI 0 0 '^', =.. 0)
Chassis Layout Part Crystal O '' 2") = (-A, ED
'6' ,
Chassis Color Dot Label No. Cony. 1st. I.F. 2nd. I.F. Diode Driver Output -Output Supplier
Detector T2 2NO I.F TRANS
Color
T6 OSCILLATOR TRANS. '-'
TI 1ST I.F. TRANS.
' rri ''' '' 0 .", =
121 -1 9 Texas T3 3RD I.F TRANS.
6CT41 Z 1 Black Black Zenith 121 -54 121 -1 13 121 -67 103-19 121-120 23..0...Q. ,...:D In...:,_ :...,,,,97 .c:D,
~- 2262'.:D._.1..4:::: ::
102-5722 RETMA 214252 2N309 2N308 1N87G R119 R16 Instrument tn , co
PNP PNP PNP Matched Pair TRANSISTOR & TRIMMER LAYOUT a);-' v3(...n5. c,-rt,<
Type PNP
PNP PNP I
FOR CHASSIS 6CT41Z1 at 'DO ti)" Cli 71 6 "0 (7;
LEGEND
B -BASE
53
C -COLLECTOR
_0_5) 0 00 0 E -EMITTER
121-19
OUTPUT
4
MATCHED PAIR S 24
0082 15
MFID
95-1685
60V
AUDIO OUTPUT
TRANSFORMER
47-r
z 0
0082 WO
Pz1 0
12
T4 0
95-1601 121-113 1-i
95-1518 '
;-t
2ND I.F. 1ST I.F.
DRIVER
100 \ TRANSFORMER 121-54
TRANSFORMER Co
02 mFD TO GANG CONV. cr)
()I tr1
u)
121-120 rzJ
C18
DRIVER Is WO
GANGs
o
OVERLOA L
co N
DIODE
-
16
95-1686
OSCILLATOR
1.1F-11
r
T3
r-
95-1602
3RD I.F. E g
ascdmmr
TRANSFORMER
680
4
CT-"". MFD
L 6- 5 .02 mFD
11 *HOCI
,iODE
05 MED
Ti
121-67 95-1687
2ND I.F. 1ST I.F.
TRANSFORMER
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH RADIO CORP. Model "Royal 710" - Chassis 7CT43Z1
(Continued on page 186, over)
PRINTED CIRCUIT SERVICING
COMPONENT REPLACEMENT
Servicing printed circuit sets is, in general, much the
same as servicing ordinary receivers. However, certain Resistors and capacitors should be replaced by clipping
tools and techniques are well suited for this type of out the defective part and neatly soldering in the new
work. The following items are especially useful: part. If a unit, such as the oscillator coil or I.F. trans-
former, is to be removed heat the mounting lugs with a
1. Good pair of long -nose pliers. pencil type soldering iron and move them away from the
2. Sharp wire cutters. soldered connection with a long -nose pliers or metal
3. Small stiff glue brush (for solder removal). pick. Continue heating the lugs and brush away the
4. Pencil type soldering iron with a small tip molten solder with a small stiff glue brush. Remove the
(25 watts or less) defective unit by lifting it off the chassis. Before in-
serting the new unit, be certain that the lug holes are
WARNING: Excessive heat may damage the printed open and free from solder. Forcing a lug against a
circuit during component replacement if a soldering solder filled lug hole may break the bond between the
pencil, iron or gun of higher wattage rating is used. chassis base and the printed wiring. It is, therefore,
necessary to exercise care when replacing units.
5. Tin leads on component before soldering.
6. Use only solder with a 63% tin 37% lead mixture An open or damaged section of printed circuit wiring
which has an extremely low melting point. can be replaced by soldering a short jumper wire across
7. Metal pick (soldering aid). the points to be connected.
ALIGNMENT PROCEDURE
Input Signal Connect Inner Conductor Connect Outer Shield
Operation Frequency From Oscillator To Conductor From Set 1:61 At Trimmers Purpose
Oscillator To
r ...--
1 455 KC Chassis 600 KC Adj. TI, T2, For I.F.
T3 for maxi- Alignment
mum output.
_
-
2 1620 KC ONE Gang C IC Set oscillator
wide open to dial scale.
TURN
3 600 KC LOOSELY Set dial /At slug Adjust T6 for
COUPLED near maximum output
TO 600 KC while rocking
gang. Adjust for
WAVEMAGNET maximum output
regardless of
5
REPEAT
STEPS 2 6 3
1260 KC
- -
1260 KC
-CIA
dial accuracy.
_
Align loop ant.
121-19
OUTPUT
121-5400-128 121-67 121-113 121-52 MATCHED
MIXER 1ST I. F. 2ND I.F. DRIVER
Ti T3 C
3300
0033
PO
4
I
11A 13 -Pr
T07,01.
110A
OA T5
Cil C13
1.13 1011
02 Os
-
,so 50 1470
CaD
rSt
gt
010% 0
CCSTROL 5600
u \510% C3
N
C6
100%
05 02 Pot
Ia
113 121-19
4700
3300 560 to%
OUTPUT
54r 75
tr05 010% tot C15 MATCHED
N
.3900510%
4Z% fgh 0053
5
100
12
Ce 416
220t of
lov OV
PNP TRANSISTOR
2200 Ti TO
GROW.° LUG
COLLECTOR
T6
east
121-53 IN 10 5e v10
FIRMER
05
% OSC. 04 50 In 50
17
43A
CIO 30
I
ROT(S:
COLLECTOR
trot LuGJ PISMO. III
URI., ONFRO.1 SPEC.
1/7 wall, I.,
11
T6 ALI ROO.. LAE D.C. UPI,. ..Ill SP. UO.
4700 EMITTER
AIL OR.. JAI IMICA01.1. UNA. W.I.,.
1-10%
I c .001
It
05
,1 11.1'.10
05
D.C. DOLMA. 340. APE
RO SIGNAL UPI. AR A.0 -0.C.
0014
.4 74cur.
cal. Or.
04 II 0. 30 w.f..
01
MOUND LUGY ..jr. room [x141111
DIAGRAM FOR 7CT43Z1
185
WHITE
LEGEND BLACK
'II B --BASE
7
-- 7 C -COLLECTOR
E --EMITTER
121 19 ON -OFF Sty,TON
OUTPUT VOLJNE CONTROL
MATCHED PAIR T5
95-1588 _
C14 EARPHONE JACK
(1031 MFD AUDIO OUTPUT
TRANSFORMER ' -
1 15
}I( C CIA ANTENNA TRIM
46.003 L i
I
!
A CIC OSCLLATOR TRIM .I ,1 N 4'
-
MFD tr 19
;
J -
h.52
,0v ....L- TUNING
1
ZS = L, ,r,- , .-_
ii 1 M-76
III iii--
Hi.. ,_
-,
CII L
3 MFD + .
-4! ,ii.
, -o.,,,-.
12 2100CIA I, -,..- 1` ,,14-
95-1601
:`',,,.221.4.,;_et. j.zimt 2,,
2ND I.F. 1 2 1-67 LOOP "B" 121-53 12 2ND IF TRANS
TRANSFORMER 1ST I.F. OSC. 16 OSCILLATOR TRANS
TI 15T I F TRANS -
I F
C21 T3 3RD TRANS
T4 .01 FAH)
95-1587 TRANSISTOR & TRIMMER LAYOUT
DRIVER
TRANSFORMER
MFD
TO
121-52
GANG R F
DRIVER
4,
t.
.
i GANG
A12
- OSC
1
I
T3
E
B 250 Mmf
95-1602 o C21
3RD I.F. alt 1
TRANSFORMER .03 NOD O
LOOP 'A" '10
$1)
2X.03 MFD dR
+ CD
121-113
C12
2ND I.F. 100 MFD CC
T1 T6 01
95-1600 121-54 95-1513
1ST I.F. MIXER OSCILLATOR
TRANSFORMER TRANSFORMER
CHASSIS, WIRING AND COMPONENTS VIEWED FROM WIRING SIDE
121-74 121-64 121-61
*121-105 *121-106 *121-107
121-78 121-62 121-73
*121-103 *121-104 2ND LE DRIVER OUTPUT
*121-101 TO MATCHED
R.F. MIXER 1ST 1.E
r2 ci9
, ,
- CS 220.' 0033
93
.- d) I foor 'T 1
3,
1
CIA '.71 F t (I? 0
.,i LA CI) T !Pr I SA
CIC 10 1
I
O
0
.t "° (1)
cp
ao ca.
o ,..< Ft.'
- r, ,,-,1
g' . 'th' cr 0
\ oz 121-61
.-, 9-
iwi M
''' EL PI a' x
-se *121-107 co O
\ 1:)
"V OUTPUT cp -..
2 2, -4..
(.,,,
-o
CS 331 5500 C20 MATCHED g. (-) 0
25 05
cra
010% 010%
0033
- , a. CD
ten
100
O o E ...,. Crl
5560 x nw=
e. 551TER On CO
.02 P
wv CONTROL Ni co
5100 C. 05 540 .1-1 rn
- - CD
!10 5-1-1011 ±10%
C2
004?* lo v lf;z170t6ints
1101.,
-ja.. CD
OS ... Co F. 0
:0- II
C23
To 580 FIT H '0 CD
-CRC CET. TRIMMER SCHEMATIC DIAGRAM FOR 8CT41 8CT41Z2 vv.. ..1]. ry
.-... ,._.. 09; L-,':
:r.
CIE OSC TRIMMER ALL RESISTORS ARE V2 WATT, CARBON, !20% TOLERANCE
T?
0: CUDI7 11:
." =
105090 UNLESS OTNE..SE SPECIFIED (t,
ax C) (viit CU
ALL VOLTAGES ARE DC UNLESS OTHERWISE SPECIFIED 7
oe
---' ALL CONOENSER ARE IN MICROFRAOS UNLESS OTHERWISE SPECIFIED
e -P. Gt. (I) -
-IS Cif DC ,OLTADES SNOW. ARE MEASURED FROM CHASSIS WITH NO SIGNAL
PS ALIGNMENT PROCEDURE
121-65 USING AN AC. C OR VACOUS TUBE VOLTMETER
PA *21-102 DEMOTES CAMS IS
4/00
A R.F IR WER IA 010% OSC.
td tr Input Signal Connect Inner Conductor Connect Outer Shield
1425 Conductor Rem Sat Dial At Trimmers Purpose
WHITE .1 Operation Frequency From Oscillator To
BLACK - 026
Oscillator To
1 455 KC Chassis 600 KC Adj. T2, T3, For I.F.
T4 for maxi- Alignment
mom output.
COLLECTS!
OM -060 SORTCM
ILSE CIE Set oscillator
AND 2 1 620 KC °sag
VOLUME EMITTER ONE
- wide open to dial seals.
TURN
EMITTERS 3 600 KC Set dial Adjust slug Adjust T7 for
I
LCOLLECT0I1 LOOSELY
RISE
near in T7 maximum output
__5tELO COUPLED - 600 KC while rocking
COLLECTOR gsng. Tune T7
TO
NINE for maximum out -
WAVEMAGNET
EMITTER pat regardless of
dial accuracy.
' TRANSISTOR PNP
RISE I_L?..T" 4 REPEAT - -
STEPS 2 & 3
5 1260 KC 1 260 KC CIA. CIE Align loop ant.
T.,',.--6.0uND LUG
--
EARPHONE *111-10T .0
*It. i 13
MATCRED CHASSIS INFORMATION CHART
50
FIR
, II GO
Trensiotor
101-74 Part Crystal
""' Chassis Layout
III -TS Color Dot Label No. R.F. Mixer Oro. 1st I.F. Zed I.F. Diode Driver ChitputOutput Supplier
Chasid.
Color Detector
1
OS II
.1171t
Cr Red Bieck Zenith 121.101 121-103 121-102 121-104 121-105 103-19 121-106 121.107 Sylvania
OE
30 .8CT41
102-6298 E.I.A. 29544 20411 20409 20409 264409 1N87G 20407 29407
pLoA7
3 Type PNP PNP PNP PNP PNP PNP Matched PART
T. 4.--4000.5 LUG PNP PNP
06 IS 121-73 121-74 103-19 12144 121-61 R.C.A.
T3 250 I.F TRAMS. IICT41Z2 Black Red Zenith 121-78 121.62 121-65
03 102-6266 E.T.A. 20544 20411 261409 20409 20409 10870 20407 20407
T7 OSCILLATOR TAMS:
04 30 Type POP PNP PNP PNP PNP POP Matched Pair
TI R.F. TRANS. PNP PNP
12 1ST. I.F. TRANS 4. !ZIA J GAIOUND LUG
T4 350 IE TRANS
TRANSISTOR & TRIMMER LAYOUT
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
ZENITH RADIO Model "Royal 755" Chassis 8CT41, 8CT41Z2 (Continued)
soldered connection with a long -nose pliers or metal
COMPONENT REPLACEMENT pick. Continue heating the lugs and brush away the
molten solder with a small stiff glue brush. Remove the
Resistors and capacitors should be replaced by clipping defective unit by lifting it off the chassis. Before in-
out the detective part and neatly soldering in the new serting the new unit, be certain that the lug holes are
part. If a unit, such as the oscillator coil or I.F. trans- open and free from solder. Forcing a lug against a
former, is to be removed heat the mounting lugs with a solder filled lug hole may break the bond between the
pencil type soldering iron and move them away from the chassis base and the printed wiring.
pl
14,
\
\ 4, 4.9
t
coifo
co \\NAL
`e.' 0 9 _
A 0o A
-< Z
or
D Cc cc
cc
t
0.
N 011 -
Li Of
"- cc LL
-0 aLL
0-
hZ
,"
Z cc
<
cc
0111.'
oFi
uti-Ljr--
J II _7 J
V
[1+
8
121-54 121-51 121-100 121-19
MIXER 1ST IT 2ND I.F. OUTPUT
LI
TI T2 T3 121-120 MATCHED PAIR
1- - 1
1K ±105.
1 DRIVER TEL
1 0201COI --VV\v
T4 AL
IL -./JV
15V 3 MFD Op 15
0
A CIB 091,
250 120CH1
- 250
r
18V 470
MMF
MME RI
-W C
5K 20 (1)
VOLUME 0% oq
L C9 CH --
CONTROL ! MED
0 .I
SP1
0
-45V T%6V 10
C4 C5 C6 710%
-15 V Au\ I
.0502 05 Po
C3
- 35 40.4 Dq
CD
102 151(710%
470
C2 CD
1500 \
!10% 121-19 RED CD
4700 56K
710% 1.10%
OUTPUT
§680 0
MATCHED PAIR
CD
>82K 2700
>T10% -710% 100
BT I
= 6V
BB
CI3 * BATTERIES 14 REO'D
CI9
6 MFD 3
3-05 3V 2
I GIB
470 C17 SO MED 7-
6V 14
T.02 -Sy; H ISI
UI
1
O TcN
I
SWITCH SHOWN
CILCV
IN OFF POSITION
1312
10K I 5v Z2NI. NOTES
EMITTER PNP NPN
710. I REOD
BASE - COLLECTOR COLLECTOR ALL RESISTORS ARE CARBON I/2 WATT, ±20%
CIC TOLERANCE UNLESS OTHERWISE SPECIFIED
COLLECTOR
19 BASE BASE ALL VOLTAGES ARE DC UNLESS OTHERWISE SPECIFIED
°6 IN MICROFARADS UNLESS
C14 ECRISOEENSSPEERCS,FAIERDE
9V 121-53 EMITTER EMITTER
AA ADOTU:
VOLTAGES SHOWN ARE MEASURED WITH NO SIGNAL
C12 O 4700±10%,
OSC. TRANSISTORS USING AN AC -DC OR VACUUM TUBE VOLTMETER
05
0 C15 DENOTES CHASSIS
02 ALIGNMENT PROCEDURE
001
J IK C16
05 Input Signal Connect Inner Conductor Connect Outer Shield
Operation Frequency From Oscillator To Conductor From Set Dial At Trimmers Purpose
Oscillator To
DIAL CORD DRIVE 455 KC Chassis 600 KC Adj. T1, T2, For I.F.
T3 for maxi- Alignment
ONE mum output.
TURN
2 1620 KC LOOSELY Gang C 1C Set Oscillator
wide open. to dial scale.
COUPLED
TO Set Oscillator
3 535 KC Gang Adjust slug
0 ,2
ONE COMPLETE
WAVEMAGNET Closed in T6 to dial scale.
TURN BEFORE
SLOT 1/4 TURN
AFTER SLOT roE 4 REPEAT
T3 STEPS 2 & 3
ONE COMPLETE TURN Oa
AROUND SLOT 5 1260 KC 1260 KC CIA Align loop ant.
CIC OSC TRIM
CIA ANT TRIM MATCHED PAIR
T5 -
1"1
95-1635 13 3RD I F TRANS
-t.
AUDIO OUTPUT I
TRANSFORMER T2 2ND I F TRANS
T6 OSC. TRANS
2 53
121-5.
NNN 121-120
121-19 t
OUTPUT TI 1ST I F TRANS - 12.:100
r- 121-54
MATCHED PAIR
C
1-+
OVF
(
3 MFG
II
14 Z.T --!-)ry
95-1518
DRIVER J 4'^9 T2
TRANSFORMER 1.
95-1515
2ND I.F. 121-51
- TRANSFORMER 1ST I.F.
121-53
OSC
121-120
DRIVER
16
4700 95-1513
r-1,7 C9 OSCILLATOR
50 too
1 _ (18
SO MFD
r - LEGEND
B --BASE
(7.
.02 MW C- COLLECTOR
51 E EMITTER
ci
-
+1.02 to' r I
13 -
4 5 C13
95-1576 FD
6 MFD
3RD I.F
TRANSFORMER
/1'21-100 T1
O GANG
2ND I.F. 95-1514 GANG p F
FRAME -
151 I.F.
TRANSFORMER 121-54
MIXER
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Index Admiral, C ont.
Y853
CBS -Columbia
00
600
30
31
General Elect. Magnavox
T105A
T106A,B
43 55-01
43
70-71
y865
Y865 5 C1010 32 T107B 11-3 Majestic
Admiral Corp. Y866 C1012 32 T140A 4 900 72
1F1 16
2E1 16
83 C1148 32 T141A )1)14
875 C1152 T15OA 45 Montgomery
2E1A 16 C1154 T151A Ward
878 3333 4-)
4E3 3
925 C1156 T155A 46 GTM-1201A 148
4142,-A 17 C1160 T156A 46 GEN-1850A 73
929 16 3333
41,20A 17 C415A,C
9 1638 47 GEN-1851A 73
4P21, -A 17 Emerson Radio C416A,C 47
Y949 16
4124,-A 17 Y1189 3 876B 41 C417A,C 47 Motorola, Inc.
41,25,-A
4L26, -A
4L28, -A
17
17
17
Y2009
Y2011
Y2012
10
10
10
8811
880
83B
B
3
46
41
C420A
C421A,B,C
C22B,C
4
48 A1B,-N
48 A1R,-W
48 C1N,-W
93
93
94
5A5 Y2013 10 6688 34 & 35 C43 0A 49 A2G,-N 94
5D5 Y2023 10 901-B through C431A 49 A2P,-W 94
5B5 Y2027 10 906-B on 40 C450A ,B 50 C2B,P,W 94
5E5 Y2028 10 908-B 37-39 C451A,B 50 03AR
5E5, -A 6 909-B 37-39 50 C3G,-1
5E5B 7 American 912-B 37-39 CT 55 51 C33,-1 94
5F5 8 Motors 915B 41 OA 52 C3W,-1 9k
51,5 4 8990706 74 916B 41 P 71A,B 53
7P1 9 8990811 75 917B 41 P672A,B 53 04I1D,MF 7
7Q1 12 918B 41 P673A,B 53 76
7V1 10 Arvin 921-D 37 P67411 53 c4B,P,s 94
7V1A,-B 10 1576-- 18 924B 41 p745A 56 c5G,s,w 95
8s1C 13 120374 35 B
p746A,,B 56 lom 78
8T1 15 259f3 2126 120456B 40 p77oA 55 lomx 77
8T1A 1 3582 120462B 40 p771A X11B,E,G,R 96
8V1 1 5591 14 1204663 37 p776A ,B 55 L12G,N 89
329 1 5592 2 120467B 40 P780A 5 X12, -A-1 92
691 6 5594 25 120468B 37 P785A 57 X12E-1 92
692 6 7595 20 120471B 40 P786A 57 L13S,-W 90
7o3 9 8092 26 120472 34 P787A 57 Ll4E 91
708 9 8093 26 120473B 410 P795 59 SF74SL 98
711 15 9594 22 120474B 4 P796 59 SH1oB,E 98
715 15 95 23 120475B 41 P797 59 SH17E,GL 99
739 8 1. 700 19 120479B 41 P800A 60 SH17N,S 99
742 12 1.4 500 18 120480B 37 P830A 61 SH18GL,N 99
743 12 1.46700 24 1204885 4 P831A 61 SK22B,M 99
751 14 1.46800 24 1204 363 RP1I15A 62 SK24B,M 99
757 14 1.46900 25 120487B 41 RP1116A 62 sK24w 99
Y793 7 1.47200 20 120495B 37 RP1130A 63 SK28B,M,W 101
Y797 7 1.47500 22 RP113OB 63 SK29B,M,W 101
y798 7 1.47600 23 Ford RP1150A 6 SK30B,M 101
811B 13 1.47900 21 C OAF -18805T RC120/50A 65 SK3OLIC,W 101
816B 13 1.48300 26 COAF-18805U RC1241/51A 65 SK31B 101
Y821 15 1.48600 26 CODF-18805D RC1242/52A 65 SK31CW,M 101
Y822 1i 1.49400 26 all on 76 sK36M 100
833 Hitachi Ltd. SK37CW 100
y837
Y837 4 Bulova Gamble-Skogmo TH-621 66 SK38B 100
4 160 27 43-9903 42 TH-666R 6 CTA6OX 79
Y839 4 170 27 43-9905 42 TH-862R 68 CTM6OX 8o
Y8469 4 180 27 RA48-9903A 42 91.Ml 81
Y847 4 330 27 8-9905A 42 Hoffman 101 86
Y848 4 66o RA
66 42 P706 69 102 83
Y849 4 680 29
9 88 42 1123 69 104 87
191
VOLUME R-20, MOST -OFTEN -NEEDED 1960 RADIO SERVICING INFORMATION
Motorola,Cont, Philco, Cont. RCA, Cont. Westinghouse+ Westinghouse+
110 86 SA -1005 122 RC -1195 131 II-55ACS2 163 V-2508-02 163
301 85 H-1383 122 RC -1196 132 II-56ACS1 160 V-2508-3 162
302 84 H-1385 123 RC -1196A 132 H-56Acs2 160 17-2508-04 163
310 85 H-1410 123 RC -1197 133 H-57ACS1 161 V-2509-1 164
601X 88 G-1412 124 H-57Acs2 161 V-2509-2 164
HS -728 89 H-1413 123 211/,Roebuck H-60ACS1 159
HS -729 90 H-1416 123 9019 through H-60ACS2 159 Zenith Radio
HS -730 91 H-18 124 9023 137 Ii -697P7 148 3B30 165
HS -7 2 92 G-1608 124 9023.5 137 II -698P7 148 B32 177
113-7 93 11-1616 124 9202,A 138 H -699P7 148 22Z 165
113-745 94 11-1618 124 9203,-A 138 H -700T5 147 4B25 166
115-749 94 o-17106 125 9214 137 H -701T5 147 5B23 167
Hs -750 94 11-1714 126 9215 137 H -702T5 147 5E127 168
Hs -752 94 M-5944 114 9217A 137 H -704T5 151 5B29 166
HS -753 95 9218A 137 H-7o5T5 151 5co7 169
HS -759 96 RCA Victor 9222 138 H -706T5 151 5C09 170
HS -761 98 1T4 133 132.45100 138 1I -708T5 152 6co3 171
113-763 98 1T5 131 132.45102 138 H -709T5 152 6cT41zi 183
Hs -764 99 PC -1 127 528.53300 137 11-710T5 152 7AT46z1 189
Hs -765 99 PT -1 128 528.53310 137 H -711T5 152 7co2 172
Hs -766 99 T-1 128 528.53350 137 H -715T5 153 7c05 174
Hs -767 100 TC-1 132 528.53400 138 H -716T5 153 7C06 174
HS -768 101 TX -1 132 H -718T5 156 7CT40z1 179
HS -769 101 C-2 127 Sylvania Elec. H -719T5 156 7CT40Z2 179
HS -774 101 SES-2LE 136 5P10 H -720T5 156 7CT43Z1 185
Hs -780 144
99 T-2 128 5P11 144 H -722T6 157 8001 175-176
HS -781 100 XF-2 129 7P12 145 H -723T6 157 8c02 175
Hs -789 92 c-3 127 7P13 139 H -725P6 150 8CT40 181-182
HS -792 98 SES-3 136 1-616-2 140 H -726P6 150 8CT40Z2 181
HS -793 101 x-3 127 1-617-4 H -727P6 150 80T41
139 187
1000 91 XF-3 129 1-635-1 H -728P6 150 8CT41Z2 187
142
0-4 130 1-637-1 144 H -729P7 158 9B26 177-178
Packard -Bell SES-4JE 136 1-638-1 145 H -730P7 158 SF112E 166
5R6 103 X-4 130 1-638-2,3 145 H -F1000 159 SF112R,W 166
VC7 103 XF-4 129 2800 145 H -F1001 159 SF11)1E 168
RC1 102 KS -23 134 2900 14.5 H -F1002 159 SF114R,W 168
PD -23 134 3100 139 H -F1003 159 SFD122E 167
Philco Corp. FM -2 D 134 3211 139 H-81100 164 SFD122R,W 167
T -45(1 21.f) 104 PD -2 134 3406 140 H-81101 164 SF174 165
T-4 (126) 105 PF-2 135 4703 142 H -R1102 164 275 179-180
TC-47 106 PF-26D 135 H -R1103 164 500E 181-182
T-50 107 RS -178 134 Trav-ler H -R1200 164 Cp.9C,L 169
T-78 108 RS 178X 134 T210 146 11-81201 164 C,19P,W 169
RT-300 109 RS -182 135 T211 146 1I -R1202 164 C520B,V,W 170
RT-400 111 RS -184 136 T212 146 H -R1203 164 C624C,V,W 171
G-747 115 Rs -184A 136 T213 146 Ii -R1204 164 675 183-184
H-759 116 Rs -185 136 236 146 V-2259-3 147 710 185-186
H-762 116 RC -1188A 127 6521 146 V-2393-3 148 C724G,L 172
11-763 116 RC -1188B 127 V-2397-3 150 C724P 172
H-1 116 RC -11880 127 Westinghouse v-2398-1 151 C725C,F,L 174
H-76 117 Rc-1188D 127 H-51mP1 162 V-2398-2 152 C730,E,R 174
11-829 118 RC -1189 128 11-51MP2 162 V-2400-1 153 755 187
11-830 119 RC -1189A 128 R-511.1133 162 11-2401-1 156 c335E,H,R 175
11-832 119 Rc-1189B 128 H-52MPS1 163 V-2401-2 157 C845L,M 175
H-834 119 RC -1190 129 H-52MP32 163 V-2402-1 158 C845W,Y 175
H-83 119 RC -1190A 129 H-52MPS3 163 V-2507-1 159 950 189-190
11-838 117 RC -119013 129 H-54ACS1 162 V-2507-2 160 SFD2505E 166
H-973 120 RC -1191 130 H-54AC32 162 V-2507-3 161 SFD2505R,w166
T-1000 121 RC -1191A 130 H-55AC31 163 V-2508-1 162 SF2530 177
192
Another
Supreme Public"lions
Service Manual
Supreme Publications are Available at All Leading Parts Jobbers
You might also like
- Rcms2901-120fe (Rev.a) User Manual 201110No ratings yetRcms2901-120fe (Rev.a) User Manual 20111027 pages
- Radio Servicing Made Easy Gernsback 1961 Vol 1No ratings yetRadio Servicing Made Easy Gernsback 1961 Vol 1182 pages
- Basic Radio Course Electronics Australia 1967No ratings yetBasic Radio Course Electronics Australia 1967131 pages
- The Radio Amateur's Handbook ARRL 1926 1stNo ratings yetThe Radio Amateur's Handbook ARRL 1926 1st228 pages
- Heathkit HW-8 Kit Instruction Manual - PDF - 5fc5693cd4fe55.40762734100% (1)Heathkit HW-8 Kit Instruction Manual - PDF - 5fc5693cd4fe55.40762734101 pages
- BelowTenMetersTheManualOfUltra Short Wave Radio PDFNo ratings yetBelowTenMetersTheManualOfUltra Short Wave Radio PDF72 pages
- Guide To Recapping The Zenith Royal 7000 Trans-Oceanic: Article and Photos by Ed Morris100% (1)Guide To Recapping The Zenith Royal 7000 Trans-Oceanic: Article and Photos by Ed Morris4 pages
- Radio TV Experimenter 1965-02-03 Regen 80 10m Muy Bueno Dos TubosNo ratings yetRadio TV Experimenter 1965-02-03 Regen 80 10m Muy Bueno Dos Tubos132 pages
- Babani BP59 Second Book of CMOS IC ProjectsNo ratings yetBabani BP59 Second Book of CMOS IC Projects128 pages
- Philips Cafe - Delice - HD - 7604 A Service ID7940100% (1)Philips Cafe - Delice - HD - 7604 A Service ID79402 pages
- Interface Operating Terminal and Programming: (BR&MOD)No ratings yetInterface Operating Terminal and Programming: (BR&MOD)13 pages
- AC Motors, Motor Control and Motor Protection0% (1)AC Motors, Motor Control and Motor Protection25 pages
- A Nine-Switch Three-Level Inverter For Electric Vehicle ApplicationsNo ratings yetA Nine-Switch Three-Level Inverter For Electric Vehicle Applications5 pages
- The DVB Satellite, Cable and SMATV Systems: Why The Technical Choices Were MadeNo ratings yetThe DVB Satellite, Cable and SMATV Systems: Why The Technical Choices Were Made20 pages
- XEL-STD-Guideline For Design of Transmission Line Structures - Lightning ShieldingNo ratings yetXEL-STD-Guideline For Design of Transmission Line Structures - Lightning Shielding21 pages
- Finetek-Sb RF Capacitance Admittance Level Switch PDFNo ratings yetFinetek-Sb RF Capacitance Admittance Level Switch PDF6 pages
- RBS 6201/6202 & BBS/BBU 6201 Installation: RAN System Description and RBS 6000 SurveyNo ratings yetRBS 6201/6202 & BBS/BBU 6201 Installation: RAN System Description and RBS 6000 Survey22 pages
- Removing Hidden Internal Packaging Defects From Production: Integrated Circuits Often FailNo ratings yetRemoving Hidden Internal Packaging Defects From Production: Integrated Circuits Often Fail4 pages
- CS-Datasheet-TOPHiKu6 - CS6W-T v1.6 F45 EN 560-580WNo ratings yetCS-Datasheet-TOPHiKu6 - CS6W-T v1.6 F45 EN 560-580W2 pages
- Software ISO 7816 I - O Line ImplementationNo ratings yetSoftware ISO 7816 I - O Line Implementation13 pages
- Electric Stacker: Instruction Manual PSE15L-CNo ratings yetElectric Stacker: Instruction Manual PSE15L-C24 pages
- Serial /PROFIBUS DP Adapter PM-125 User Manual: Technical Support: +86-21-5102 8348No ratings yetSerial /PROFIBUS DP Adapter PM-125 User Manual: Technical Support: +86-21-5102 834851 pages
