Veeam Backup 11 0 Quick Start Guide Vsphere

Veeam Backup & Replication
Version 11
Quick Start Guide for VMware vSphere
October, 2021
© 2021 Veeam Software.
All rights reserved. All trademarks are the property of their respective owners.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form by any means, without written permission from Veeam Software
(Veeam). The information contained in this document represents the current view of Veeam on the issue
discussed as of the date of publication and is subject to change without notice. Veeam shall not be liable for
technical or editorial errors or omissions contained herein. Veeam makes no warranties, express or implied, in
this document. Veeam may have patents, patent applications, trademark, copyright, or other intelle ctual
property rights covering the subject matter of this document. All other trademarks mentioned herein are the
property of their respective owners. Except as expressly provided in any written license agreement from Veeam,
the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other
intellectual property.
NOTE :
Read the End User Software License Agreement before using the accompanying software programs. Using
any part of the software indicates that you accept the terms of the End User Software License Agreement.
2 | V eeam Backup & Replication | Quick Start Guide for V Mware vSphere
Contents
CONTACTING VEEAM SOF TWARE ................................ ................................ ........................... 5
GETTING STARTED ................................ ................................ ................................ ............ 6
ABOUT VEEAM BACKUP & REPLICATION ................................ ................................ ................... 7
VEE AM BACKUP & REPLICATION UI ................................ ................................ ......................... 8
BACKUP INFRASTRUCTURE ................................ ................................ ................................ .. 9
Backup Infrastructure Components ...................................................................................................... 10
Deployment Scenarios ......................................................................................................................... 11
PLANNING AND P REPARATION ................................ ................................ ............................. 13
System Requirements ..........................................................................................................................14
Used Ports .......................................................................................................................................... 15
DEPLOY MENT ................................ ................................ ................................ ................. 16
Step 1. Installing Veeam Backup & Replication....................................................................................... 17
Step 2. Adding Virtual Infrastructure Servers ........................................................................................ 20
Step 3. Configuring Back up Proxy ........................................................................................................ 23
Step 4. Configuring Back up Repository ................................................................................................ 28
Step 5. Configuring Object Storage Rep ositories ................................................................................... 34
Step 6. Config uring Scale-Out Backup Rep ositories .............................................................................. 39
VM BACKUP................................ ................................ ................................ ................... 44
Backup Methods ................................................................................................................................. 45
Creating Backup Job ........................................................................................................................... 47
Monitoring Job Performance in Real Time ............................................................................................ 52
Start Backup Job Manually .................................................................................................................. 53
Locating Backup Files ......................................................................................................................... 54
Creating Application-Aware Backup Job ............................................................................................... 55
DATA RECOVERY................................ ................................ ................................ ..............59
Restoring Entire VM ............................................................................................................................60
Restoring VM Files .............................................................................................................................. 64
Restoring VM Virtual Disks .................................................................................................................. 67
Restoring Guest OS Files ..................................................................................................................... 70
Restoring VM Guest OS Files (FAT, NTFS, ReFS) ........................................................................... 71
Restoring VM Guest OS Files (Linux, Unix, etc) ........................................................................... 73
Restoring Application Items ................................................................................................................ 76
BACKUP COPY ................................ ................................ ................................ ................. 79
VM REPLICATION ................................ ................................ ................................ .............83
Creating Replication Job ..................................................................................................................... 84
Monitoring Job Performance in Real Time .............................................................................................91
Start Replication Job Manually ............................................................................................................ 92
Replica Failover and Failback ............................................................................................................... 93
Performing Replica Failover ....................................................................................................... 95
Performing Permanent Failover ................................................................................................. 97
Undoing Failover ...................................................................................................................... 98
Performing Failback .................................................................................................................. 99
Committing Failback ................................................................................................................ 101
Undoing Failback .....................................................................................................................102
ENTERPRISE MANAGER ................................ ................................ ................................ .... 103
Installing Veeam Back up Enterprise Manager ..................................................................................... 104
Adding Backup Servers.......................................................................................................................107
Managing Jobs ................................................................................................................................. 109
Performing 1-Click File Restore ............................................................................................................ 111
Performing Self-Restore of VM Guest OS Files .....................................................................................113
BACKING UP PHYSICAL MACHINES................................ ................................ ........................ 117
Creating Protection Group .................................................................................................................. 118
Creating Veeam Agent Back up Job ..................................................................................................... 122
RESTORING DATA OF P HYSICAL MACHINES ................................ ................................ .............127
4 | V eeam Backup & Replication | Quick Start Guide for VMware vSphere
Contacting Veeam Software
At Veeam Software we value feedback from our customers. It is important not only to help you quickly with your
technical issues, but it is our mission to listen to your input and build products that incorporate your
suggestions.
Customer Support
Should you have a technical concern, suggestion or question, visit the Veeam Customer Support Portal to open a
case, search our knowledge base, reference documentation, manage your license or obtain the latest product
release.
Company Contacts
For the most up-to-date information about company contacts and office locations, visit the Veeam Contacts
Webpage.
Online Support
If you have any questions about Veeam products, you can use the following resources:
• Full documentation set: veeam.com/documentation-guides-datasheets.html
• Veeam R&D Forums: forums.veeam.com
Getting Started
Document Structure
The guide contains instructions on the following:
• Veeam Backup & Replication functionality: how to deploy Veeam Backup & Replication, perform backup,
replication, and restore operations.
• Integration with Veeam Backup Enterprise Manager: a free tool for managing distributed infrastructure.
• Agent management: built-in Veeam Backup & Replication feature to back up physical machines using
Veeam Agents.
Help and Support

This guide provides a high-level overview of Veeam Backup & Replication primary features and should be
regarded as a supplement to existing technical documentation. The complete set of documentation can be
found on the Veeam Technical Documentation page.
For technical support and assistance, use the following resources:
• Veeam R&D Forums
• Customer Support Portal
About Veeam Backup & Replication
What is Veeam Backup & Replication?
Veeam Backup & Replication is a data protection and disaster recovery solution for virtual, physical and cloud
environments. With Veeam Backup & Replication you can:
• Create crash-consistent and application-consistent backups of virtual and physical machines.
• Quickly restore physical machines, EC2 instances, VMs, VM disks, guest OS files and application items.
• Perform backup health check to verify that backups are not corrupted and are ready for restoring.
• Create VM replicas and switch to them in case of a disaster.
• Automate transferring of backups to tapes and other external repositories.
Note that in this guide, we will not overview all the Veeam Backup & Replication capabilities. You can find them
in the Veeam Backup & Replication User Guide.
What Else Can I Do?

Veeam Backup & Replication provides utilities not mentioned in this guide that can help you secure and manage
your data:
• Veeam Backup for Microsoft Office 365: backup and restore solution for Office 365 data.
• Veeam Backup for Nutanix AHV: backup and restore solution for Nutanix AHV VMs.
• Plug-in for Veeam Backup for AWS: extension for integration with Veeam Backup for AWS.
Veeam Backup & Replication also provides the following tools for monitoring and management:
• Veeam ONE: real-time monitoring, reporting, alerting and managing tool for virtual and physical
environments.
• Veeam Management Pack for Microsoft System Center: Microsoft System Center extension for managing
and monitoring VMware vSphere, Microsoft Hyper-V, and Veeam Backup & Replication.
• Veeam Availability Orchestrator: a tool for automated creation and testing of DR plans that comply
regulatory requirements.
Veeam Backup & Replication UI
The user interface of Veeam Backup & Replication is designed to let you quickly find commands that you need
and perform data protection and disaster recovery tasks.
TIP :
To open online help, press [F1] in any Veeam Backup & Replication wizard or window. You will be
redirected to the corresponding section of the Veeam Backup & Replication User Guide.
Reference
For details, see Veeam Backup & Replication UI section in the Veeam Backup & Replication User Guide.
Backup Infrastructure
This section describes main Veeam Backup & Replication infrastructure components and deployment scenarios.
Backup Infrastructure Components
To start working with Veeam Backup & Replication, you must set up the backup infrastructure. The basic Veeam
Backup & Replication infrastructure consists of the following core components:
• Ba ckup server
A Microsoft Windows-based machine on which Veeam Backup & Replication is installed. The backup server
performs main management operations: coordinates backup, replication and restore tasks, controls job
scheduling and resource allocation.
• Ba ckup repository
A server where Veeam Backup & Replication keeps backup files, backup copies and metadata of replicated
VMs.
• Ba ckup proxy
A component that retrieves data from the source host, processes it a nd transfers to the backup repository.
• Infrastructure servers and hosts

VMware vSphere servers that you plan to use as source and target for backup, replication and other
activities. Microsoft Windows and Linux servers for which you plan to assign roles of a backup proxy or
backup repository.
Reference
For details on all backup infrastructure components, see the Backup Infrastructure Components section in the
Veeam Backup & Replication User Guide.
Deployment Scenarios
You can use Veeam Backup & Replication in virtual environments of any size and complexity. The architecture of
the solution supports onsite and offsite data protection, operations across remote sites and ge ographically
dispersed locations. Veeam Backup & Replication provides flexible scalability and easily adapts to the needs of
your virtual environment.
Veeam Backup & Replication supports several deployment scenarios, and each one includes the core
infrastructure components: backup server, backup proxy and backup repository. Depending on the size of your
virtual environment, you can use one of the following scenarios:
• Simple deployment
For small virtual environments. In this scenario, the roles of all components required for data protection
tasks are assigned to one machine.
• Advanced deployment
For medium-sized and large-scale virtual environments. In this scenario, the roles of components required
for data protection tasks are assigned to dedicated machines.
Veeam Backup & Replication also supports the distributed deployment scenario for large geographically
dispersed environments with multiple backup servers. We omit detailed description of this scenario because this
guide is aimed for quick overview of basic features. For details on the distributed scenario, see the Distributed
Deployment section in the Veeam Backup & Replication User Guide.
Simple Deployment
In the simple deployment scenario, the roles of the backup server, backup proxy and backup repository are
assigned to a single machine. These roles are assigned automatically to the machine where you install Veeam
Backup & Replication.
The drawback of the simple deployment scenario is that only the backup server handles and stores all data. For
medium-sized or large-scale environments, the capacity of a single backup server may not be enoug h. To take
the load off the backup server and balance it throughout your backup infrastructure, it is recommended to use
the advanced deployment scenario.
Advanced Deployment
In the advanced deployment scenario, the roles of the backup server, backup proxy and backup repository are
assigned to different machines. This gives the following advantages:
• The processing load is moved from backup server to backup proxy.
• Increased fault tolerance: you can store data on a sep arate machine (the backup repository).
Note that this scenario requires that you assign the roles of the proxy and repository manually.
Depending on production environment and backup and replication scenarios you plan to use, the advanced
deployment scenario may include multiple backup proxies and backup repositories, both on-site and off-site,
controlled by a single backup server.
Planning and Preparation
Before you install Veeam Backup & Replication, you must make sure that the virtual environment and m achines
that you plan to use as backup infrastructure components meet product hardware recommendations and system
requirements.
System Requirements
Make sure that servers that you plan to use as backup infrastructure components meet the system requirements
listed in the following sections of the Veeam Backup & Replication User Guide:
• System Requirements for Backup Server
• System Requirements for Backup Proxy Server
• System Requirements for Backup Repository Server
• System Requirements for Enterprise Manager
• System Requirements for Supported Applications
• System Requirements for Veeam Explorer for Microsoft Active Directory
• System Requirements for Veeam Explorer for Microsoft Exchange
• System Requirements for Veeam Explorer for Microsoft SharePoint
• System Requirements for Veeam Explorer for Microsoft SQL Server
• System Requirements for Veeam Explorer for Oracle
Reference
For the full list of system requirements, see the System Requirements section in the Veeam Backup &
Replication User Guide.
Used Ports
On backup infrastructure components, Veeam Backup & Replication automatically creates firewall rules for the
required ports. These rules allow communication between the components.
You can find the lists of the ports in the following sections of the Veeam Backup & Replication User Guide:
• Backup Server Connections
• Microsoft Windows Server Connections
• Linux Server Connections
• Backup Proxy Connections
• Backup Repository Connections
• Mount Server Connections
• VM Guest OS Connections
• Veeam Backup Enterprise Manager Connections
• Veeam Explorer for Microsoft Active Directory Connections
• Veeam Explorer for Microsoft Exchange Connections
• Veeam Explorer for Microsoft SharePoint Connections
• Veeam Explorer for Microsoft SQL Server Connections
• Veeam Explorer for Oracle Connections
• Veeam Agent for Microsoft Windows Connections
• Veeam Agent for Linux Connections
Reference
For the full list of ports, see the Used Ports section in the Veeam Backup & Replication User Guide.
Deployment
To start using Veeam Backup & Replication, do the following:
1. Install Veeam Backup & Replication
2. Add virtual infrastructure servers
3. Configure backup proxy
4. Configure backup repository
5. Configure object storage repository (optional)
6. Configure scale-out backup repository (optional)
NOTE :
In the simple deployment scenario, Veeam Backup & Replication uses the backup server also as the backup
proxy and backup repository. For this reason, you can skip the third and fourth steps.
Step 1. Installing Veeam Backup &
Replication
Install Veeam Backup & Replication on a Microsoft Windows-based physical or virtual machine.
Before You Begin

Before you install Veeam Backup & Replication, check the following prerequisites:
• The machine on which you plan to install Veeam Backup & Replication must meet the system requirements
for the backup server. For details, see System Requirements.
• A user account that you plan to use for installation must have local Administrator permissions.
Installing Veeam Backup & Replication

To install Veeam Backup & Replication, do the following:
1. Download the latest version of the Veeam Backup & Replication installation image from the Download
Veeam products page.
You must sign in with your Veeam account. If you do not have the account, register with your business
email address.
2. Mount the installation image to the machine on which you plan to install Veeam Backup & Replication or
burn the image file to a flash drive or other removable storage device.
If you plan to install Veeam Backup & Replication on a VM, use built-in tools of the virtualization
management software to mount the installation image to the VM.
3. Run the Setup.exe file from the image or disk to open the splash screen.
4. In the Veeam Backup & Replication section of the splash screen, click Install.
5. At the License Agreement step of the wizard, read the license agreements and select check boxes to
accept the terms.
6. At the P rovide License step of the wizard, specify the path to the license key.
If you skip this step, Veeam Backup & Replication will operate in the Community edition mode. You can
switch to the full version of the product if you install the license. For more information, see Veeam Backup
& Replication Community Edition.
7. At the P rogram Features step of the wizard, keep the default settings.
8. At the Sy stem Configuration Check step of the wizard, install missing software components, if any.
NOTE :
If all required components are already installed on the machine, the Sy stem Configuration Check
step is skipped.
9. At the Default Configuration step of the wizard, click Install to begin the installation.
Starting Veeam Backup & Replication

To start Veeam Backup & Replication, do the following:
1. In the Microsoft Windows Sta rt menu, select Ap p s > Veeam > Veeam Backup & Replication Console.
2. In the authentication window, click Connect.
Step 2. Adding Virtual Infrastructure
Servers
To protect virtual machines with Veeam Backup & Replication, you must add the virtual infrastructure servers
hosting these machines to the backup infrastructure.
You can add vCenter Servers and ESXi hosts. If a n ESXi host is managed by a vCenter Server, it is recommended
that you add the vCenter Server, not a standalone ESXi host.
Before You Begin

Make sure that the version of your VMware vSphere platform is supported. For details, see Platform Support in
the Veeam Backup & Replication User Guide.
Adding Infrastructure Server

To add the server, do the following:
1. In the inventory pane of the Ba ckup Infrastructure view, right-click the Ma naged Servers node and select
Ad d Server.
2. In the Ad d Server window, click VMware vSphere > vSphere to launch the New VMware Server wizard.
3. At the Na me step of the wizard, specify the DNS name or IP address of the server.
4. At the Credentials step of the wizard, specify credentials for the user account with Administrator
permissions on the added server.
To add the account, do the following:
a. Click Ad d .
b. In the Credentials window, specify the username and password used to connect to the added server.
c. Click OK.
5. Follow the next steps of the wizard. At the Summary step, click Finish.
6. Open the Ba ckup Infrastructure view and click the Ma naged Servers node. The added server must be
available in the working area.
Reference
For details on adding virtual infrastructure servers, see the Virtualization Servers and Hosts section in the Veeam
Backup & Replication User Guide.
Step 3. Configuring Backup Proxy
The backup proxy retrieves data from the production storage, compresses, deduplicates and sends it to the
backup repository.
To configure the backup proxy, you must add a Microsoft Windows or Linux server and assign the role of the
backup proxy to it. In this section, you will learn how to add a Microsoft Windows proxy.
Before You Begin

Check the following prerequisites:
• The machine that you plan to use as the backup proxy must meet system requirements. For details, see
System Requirements in the Veeam Backup & Replication User Guide.
• The machine must have access to the backup server, source datastore and backup repository.
• File and printer sharing must be enabled in network connection settings of the added Microsoft Windows
machine. On this machine, Veeam Backup & Replication deploys the required components. Without
sharing enabled, Veeam Backup & Replication fails to deploy these components.
Adding Server
To add a server, do the following:
Ad d Server.
2. In the Ad d Server window, click Microsoft Windows to launch the New W indows Server wizard.
3. At the Na me step of the wizard, specify the DNS name or IP address of the server that will perform the
role of the backup proxy.
4. At the Credentials step of the wizard, specify credentials for the user account with Administrator
permissions on the added server.
a. Click Ad d .
b. Specify the username and password used to connect to the added server.
c. Click OK.
5. Follow the next steps of the wizard. At the Summary step of the wizard, click Finish.
Assigning Backup Proxy Role to Added Server
To assign the role of the backup proxy:
1. In the inventory pane of the Ba ckup Infrastructure view, right-click the Ba ckup Proxies node and select
Ad d VMware Backup Proxy.
2. At the Server step of the wizard, do the following:
o In the Choose server list, select the server that you have added.
o In the Tra nsport mode field, leave the Automatic selection option selected.
Veeam Backup & Replication will analyze the backup proxy configuration, define to which datastores
it has access and automatically select the best way to retrieve and restore data depending on the type
of connection between the backup proxy and the source datastore.
o In the Connected datastores field, leave the Automatic detection option selected.
Veeam Backup & Replication will detect datastores to which the backup proxy has a direct SAN or NFS
connection.
3. At the Tra ffic Rules step of the wizard, keep the default settings.
Network traffic throttling rules help you manage bandwidth usage and minimize impact of data protection
and disaster recovery tasks on network performance. Setting up traffic throttling is not described in this
guide. For details see Veeam Backup & Replication User Guide, section Network Traffic Management.
4. At the Ap p ly step of the wizard, click Nex t and then Finish to exit the wizard.
5. Open the Ba ckup Infrastructure view and click the Ba ckup Proxies node. The added backup proxy must be
Reference
For details on the backup proxy, see the Backup Proxy section in the Veeam Backup & Replication User Guide.
Step 4. Configuring Backup Repository
The backup repository is a storage where Veeam Backup & Replication keeps backup files and, in case of
replication, metadata for replicated VMs. You can use different types of storage as the backup repository. The
full list of storage types is available in the Backup Repository section in the Veeam Backup & Replication User
Guide.
In this section, you will learn how to use a Microsoft Windows server as the backup repository. To configure the
backup repository, you must add the server to the backup infrastructure and assign the role of the backup
repository to it.
Before You Begin

Check the following prerequisites:
• The Microsoft Windows machine that you plan to use as a backup repository must meet system
requirements. For details, see System Requirements in the Veeam Backup & Replication User Guide.
• File and printer sharing must be enabled in network connection settings of the added Microsoft Windows
machine. On this machine, Veeam Backup & Replication deploys the required components. Without
sharing enabled, Veeam Backup & Replication fails to deploy these components.
Adding a Server
To add a server to the Veeam Backup & Replication infrastructure, do the following.
Ad d Server.
2. In the Ad d Server window, select Microsoft Windows to launch the New W indows Server wizard.
3. At the Na me step of the wizard, specify the DNS name or IP address of the server that will perform the
role of the backup repository.
4. At the Credentials step of the wizard, enter credentials for the user account with local Administrator
permissions to the added server.
a. Click Ad d .
b. Specify the username and password used to connect to the added server.
c. Click OK.
5. Follow the next steps of the wizard. At the last step of the wizard, click Finish to add the server.
Assigning Backup Repository Role to Added Server
To assign the role of the backup repository:
1. In the inventory pane, right-click the Ba ckup Repositories node and select Ad d Backup Repository to
launch the New Backup Repository wizard.
2. In the Ad d Backup Repository window, click Direct attached storage >Microsoft Windows.
3. At the Na me step of the wizard, specify the name for the added backup repository.
4. At the Server step of the wizard, select the machine that you have added.
5. At the Rep ository step of the wizard, specify a path to the folder where backup files will be stored. In
addition to them, auxiliary replica files will be placed in this folder.
6. At the Mount Server step of the wizard, keep the default settings.
7. Follow the next steps of the wizard. At the Summary step, click Finish.
8. Open the Ba ckup Infrastructure view and click the Ba ckup Repositories node. The added backup repository
must be available in the working area.
Reference
For details on the backup repository, see the Backup Repository section in the Veeam Backup & Replication User
Guide.
Step 5. Configuring Object Storage
Repositories
An object storage repository is a repository intended for long-term data storage. It can be based on either a
cloud solution or an S3 compatible storage solution. Configuring an object storage repositories is an optional
step.
Veeam Backup & Replication supports the following types of object storage repos itories:
• S3 compatible
• Amazon S3, Amazon S3 Glacier and Amazon Snowball Edge
• Google Cloud
• IBM Cloud
• Microsoft Azure Blob, Azure Archive Storage and Azure Data Box
In this section, you will learn how to configure Amazon S3 as a backup repository.
Before You Begin

Before you add an object storage repository, check limitations. To learn about limitations for different storage
repositories, see Considerations and Limitations in the Veeam Backup & Replication User Guide.
Configuring Object Storage Repository
To add an object storage repository to the Veeam Backup & Replication infrastructure, do the following:
1. Open the Ba ckup Infrastructure view. In the inventory pane, right-click the Ba ckup Repositories node and
select Ad d Backup Repository. In the Ad d Backup Repository dialog, select Ob ject Storage.
2. In the Ob ject Storage dialog, select Ama zon S3.
3. At the Na me step of the wizard, specify the name and description for the object storage repository.
4. At the Account step of the wizard, specify the connection settings:
a. [For AWS Snowball Edge, Azure Data Box, S3 Compatible, IBM Cloud] In the Service p oint / Service
end point field, specify a service point address of your object storage.
b. From the Credentials drop-down list, select user credentials to access your object storage. If you
already have a credentials record that was configured in advance, select such a recor d from the drop-
down list. Otherwise, click Ad d and provide your access and secret keys. For more information, see
Cloud Credentials Manager in the Veeam Backup & Replication User Guide.
c. In the Reg ion / Data center region drop-down list, select a region type.
If your organization has NAT or different types of firewalls and your access to the internet is limited, you
may want to use a gateway server. To do so, select the Use the following gateway server check box and
choose a server from the list.
5. At the Buck et step of the wizard, specify how your data will be stored.
a. [For Amazon S3] From the Da ta center region drop-down list, select a region.
b. From the Bucket drop-down list, select a bucket. Make sure that the bucket you want to use to store
your backup data was created in advance.
[For Azure Blob, Azure Data Box] From the Container drop-down list, select a container. Make sure
that the container you want to use to store your backup data was created in advance.
c. In the Folder / Select Folder field, select a cloud folder to which you want to map your object storage
repository. To do it, click Browse and either select an existing folder or create a new one by clicking
New Folder.
To define a soft limit for your object storage consumption that can be exceeded temporarily, select the
Limit object storage consumption to check box and provide the value in TB or PB.
[For Amazon S3, S3 Compatible] To prohibit deletion of blocks of data from object storage, select the
Ma k e recent backups immutable for check box and specify the immutability period. For more information
on immutability, see Immutability in the Veeam Backup & Replication User Guide.
[For Amazon S3] If you plan to access your backup data rarely, select the Use infrequent a ccess storage
cla ss check box. To enable Amazon S3 One Zone-Infrequent Access, select the Store backups in a single
a vailability zone only check box. For more information, see this Amazon article.
6. At the Summary step of the wizard, review the settings and click Finish.
7. Open the Ba ckup Infrastructure view and click the Ba ckup Repositories node. The added object storage
repository must be available in the working area.
Reference
For details on adding object storage repositories, see the Adding Object Storage Repositories section in the
Step 6. Configuring Scale-Out Backup
Repositories
A scale-out backup repository is a repository system for multi-tier storage of data, where the capacities of all
the added storage devices and systems are summarized. A scale-out backup repository consists of one or more
backup repositories called performance extents, and can be expanded with an object repository called capacity
extent.
Configuring a scale-out backup repository is an optional step. For more information on scale-out backup
repositories, see the Scale-Out Backup Repository section in the Veeam Backup & Replication User Guide.
Before You Begin

Before you add a scale-out backup repository to the backup infrastructure, check the following prer equisites:
• Backup repositories that you plan to add as performance extents to the scale-out backup repository must
be added to the backup infrastructure. For more information, see Configuring Backup Repository.
• If you wish to use the capacity tier option of the scale-out backup repository, an object storage repository
that you plan to add as a capacity extent to the scale-out backup repository must be added to the backup
infrastructure. For more information, see Configuring Object Storage Repository.
• Сheck limitations for scale-out backup repositories. For more information, see Limitations for Scale-Out
Backup Repositories in the Veeam Backup & Replication User Guide.
Configuring Scale-Out Backup Repository
To add a scale-out backup repository to the Veeam Backup & Replication infrastructure, do the following:
1. In the inventory pane, right-click Sca le-out Repositories and select Ad d Scale-out Backup Repository.
2. At the Na me step of the wizard, specify a name and an optional description for the scale-out backup
repository.
3. At the P erformance Tier step of the wizard, specify which backup repositories you want to add as
performance extents, and configure options for the scale-out backup repository. To do it, on the right side
of the E x tents list, click Ad d . In the E x tents window, select check boxes next to backup repositories that
you want to add as performance extents. Afterwards, click OK.
4. At the P olicy step of the wizard, specify how you want to store backup files at the performance extents of
the scale-out backup repository:
o Select Da ta locality if you want to store backup files that belong to the same backup chain at the
same performance extent.
o Select P erformance if you want to store full and incremental backup files at different performance
extents of the scale-out backup repository.
5. At the Ca pacity Tier step of the wizard, select an object storage repository that you want to add as a
capacity extent and specify when to move and/or copy data. This is an optional step.
To configure the capacity tier, do the following:
a. Select the E x tend scale-out backup repository capacity with object storage check box.
b. From the drop-down list, select an object storage repository to which you want to offload your data.
c. Click W indow and specify when it is allowed or prohibited to move or copy data to object storage.
d. Select the Cop y backups to object storage as soon as they are created check box to copy new backups
as soon as they are created.
e. Select the Move backups to object storage as they age out of the operational restores window check
box to move inactive backup chains to the capacity extent.
f. To offload data encrypted, select the E ncrypt data uploaded to object storage check box and provide
a strong password. If you have not created the password beforehand, click Ad d or use the Ma nage
p a sswords link to specify a new password.
6. At the Summary step of the wizard, review the settings and click Finish.
7. Open the Ba ckup Infrastructure view and click the Sca le-Out Repositories node. The added scale-out
backup repository must be available in the working area.
Reference
For details on adding scale-out backup repositories, see the Adding Scale-Out Backup Repositories section in the
VM Backup
When you perform a backup, Veeam Backup & Replication retrieves VM data from the source storage,
compresses and deduplicates it. After that, Veeam Backup & Replication writes data to the backup repository in
Veeam proprietary format.
In Veeam Backup & Replication, backup is a job-driven process. To perform the backup, you need to configure a
backup job. For details, see Creating Backup Job.
During runs of backup jobs, Veeam Backup & Replication creates backup chains. The chain consists of the
following backup files:
• Full backup file (.VBK) that contains a copy of the entire VM.
• Incremental backup file (.VIB or .VRB) that contains only those data blocks that have changed since the
last backup job session.
• Metadata file (.VBM) that contains information on the backup job, VMs in the backup, number and
structure of backup files, restore points and so on.
The amount of these files and how Veeam Backup & Replication places them depend on the chosen backup
method. For details, see Backup Methods.
After you performed backups, you can use them to restore the following instances: entire VM, VM files or VM
disks, guest OS files and application items. For details on restore, see Data Restore.
Reference
For details, see the About Backup section in the Veeam Backup & Replication User Guide.
Backup Methods
Veeam Backup & Replication provides three methods for creating backup chains:
• Forever forward incremental backup
• Forward incremental backup
• Reverse incremental backup
Forever Forward Incremental Backup Method

The forever forward incremental backup method produces a backup chain that cons ists of the first full backup
file (.VBK) and a set of forward incremental backup files (.VIB) following it.
During the first session of a backup job, Veeam Backup & Replication creates a full backup file on the backup
repository. During subsequent backup job sessions, Veeam Backup & Replication copies only VM data blocks
that have changed since the last backup job session and saves these blocks as an incremental backup file in the
backup chain.
After adding a new restore point to the backup chain, Veeam Ba ckup & Replication checks the retention policy
for the job and deletes outdated restore points. For details, see Forever Forward Incremental Backup Retention
Policy in the Veeam Backup & Replication User Guide.
Forward Incremental Backup Method

The forward incremental backup method produces a backup chain that consists of the first full backup file
(.VBK) and a set of forward incremental backup files (.VIB) following it.
Additionally, the forward incremental backup chain contains full backup files that “split” the backup chain into
shorter series. The subsequent full backup files can be the following:
• Active
The active full backup contains the copy of a VM. This backup is similar to the full backup created when
you run a job for the first time. Veeam Backup & Replication retrieves data for the whole VM from the
source, compresses and deduplicates it and stores it to the active full backup file.
• Sy nthetic
The synthetic full backup also contains the copy of a VM. However, this copy is created from the backup
files that you already have on the backup repository. Veeam Backup & Replication does not retrieve VM
data from the source datastore.
During the first backup job session, Veeam Backup & Replication creates a full backup file. During subsequent
backup job sessions, Veeam Backup & Replication copies only VM data blocks that have changed since the last
backup job session and saves these blocks as an incremental backup file in the backup chain. On a day when the
synthetic or active full backup is scheduled, Veeam Backup & Replication creates a full backup file and adds it to
the backup chain.
After adding a new restore point to the backup chain, Veeam Backup & Replication checks the retention policy
and deletes outdated restore points. For details, see Forward Incremental Backup Retention Policy in the Veeam
Reverse Incremental Backup Method

The reverse incremental backup method produces a backup chain that consists of the last full backup file (.VBK)
and a set of reverse incremental backup files (.VRB) preceding it.
During the first backup job session, Veeam Backup & Replication creates a full backup file on the backup
repository. During subsequent backup job sessions, Veeam Backup & Replication copies only VM data blocks
that have changed since the last backup job session. Veeam Backup & Replication “injects” copied data blocks
into the full backup file to rebuild it to the most recent state of the VM. Additionally, Veeam Backup &
Replication saves the changed block in the reverse incremental backup file and places this f ile before the full
backup file.
After adding a new restore point to the backup chain, Veeam Backup & Replication checks the retention policy
and deletes outdated restore points. For details, see Reverse Incremental Backup Retention Policy in the Veeam
Reference
For details, see the following section in the Veeam Backup & Replication User Guide:
• Retention Policy
• Active Full Backup
• Synthetic Full Backup
• Backup Methods
Creating Backup Job
Before You Begin
Make sure that all backup infrastructure components that take part in the backup process are added to the
backup infrastructure. These components include ESXi hosts on which VMs are registered, backup proxy and
backup repository.
Creating Backup Job

To back up VMs, do the following:
1. In the inventory pane of the Home view, right-click Job s and select Ba ckup > Virtual Machine > VMware
vSp here to launch the New Backup Job wizard.
2. At the Na me step of the wizard, specify a name and description for the backup job.
3. At the Virtual Machines step of the wizard, click Ad d . From the list, select VMs that you want to back up.
You can also back up VM containers: folders, resource pools, clusters, vApps, datastores and so on. If you
add a new VM to the container after the backup job is created, Veeam Backup & Replication automatically
updates the job to include the new VM.
4. At the Storage step of the wizard, do the following:
o From the Ba ckup repository list, select the backup repository that you configured in the Configure
Backup Repository section.
o In the Restore points to keep on disk, define the number of restore points to keep.
When the number of restore points exceeds the allowed value, Veeam Backup & Replication
automatically removes the earliest restore point from the backup chain. For more information, see
Retention Policy in the Veeam Backup & Replication User Guide.
o Click the Ad vanced button and, in the Ba ckup tab, specify the backup method or leave the default
settings. For details, see Backup Methods.
5. At the Guest Processing step of the wizard, leave the default settings.
The settings of this step are detailed in the Creating Application-Aware Backup Job section.
6. At the Schedule step of the wizard, do the following:
a. Select the Run the job automatically check box. If you do not select this check box, you will have to
launch the job manually. For details, see Start Backup Job Manually.
b. Select the schedule type: daily, monthly or periodically.
c. Make sure the Retry failed VM processing check box is selected.
d. Click Ap p ly.
7. At the Summary step of the wizard, select the Run the job when I click Finish check box and click the
Finish button.
8. In the inventory pane of the Home view, expand the La st 24 Hours node to see the created job.
Reference
For more information on backup creation, see Creating Backup Jobs in the Veeam Backup & Replication User
Guide.
Monitoring Job Performance in Real Time
When the job is running, you can view job statistics in real time. Statistics include job progress, duration,
processing rate, performance bottlenecks, the amount of read and transferred data, and other details of the job
performance.
To view the job statistics, do the following:
1. In the inventory pane of the Home view, select the Job s node.
2. In the working area, right-click a running job and click Sta tistics.
3. In the opened window, select a VM to view its statistics.
Note that the job must complete with the Success or Warning status. If the job completes with the Failed status,
Veeam Backup & Replication does not create the backup file is not able to perform restore operations.
You can configure email notifications to get job results. For details, see Configuring Global Email Notification
Settings in the Veeam Backup & Replication User Guide.
Start Backup Job Manually
If you do not schedule a backup job, you must start it manually. To start the job, do the following:
1. Open the Home view.
2. In the inventory pane, select the Job s node.
3. In the working area, right-click the job and select Sta rt. Wait for the job to complete. Note that the job
must complete with the Success or Warning status.
Locating Backup Files
When a backup job finishes, Veeam Backup & Replication saves backup files in the backup repository that you
specified as a backup target.
To locate backup files using the Veeam Backup & Replication console, do the following:
1. Open the Files view.
2. In the inventory pane, expand the backup repository file tree and open the Ba ckup folder.
3. In the Ba ckup folder, find the subfolder with the backup job name and open it. It must contain a .VBK and
.VBM files. If the job was run several times, the subfolder also contains .VIB or .VRB files.
Creating Application-Aware Backup Job
Application-aware processing allows you to create transactionally consistent backups. These backups allow you
to further restore application items: emails for mail agents, tables for DB servers, accounts for domain
controllers.
Veeam Backup & Replication can create transactionally consistent backups of VMs that run the following
applications:
• Microsoft Exchange
• Active Directory
• SharePoint
• SQL Server
• Oracle Database
In this section, you will learn how to create the application-aware backup job for a Microsoft SQL Server.
IMP ORTANT!
Application-aware processing is supported only for VSS-aware applications and applications listed above. If
an application that you want to back up is not supported, you can use VMware Tools quiescence with pre -
freeze and post-thaw scripts. For more information, see VMware Tools Quiescence and Pre-Freeze and
Post-Thaw Scripts in the Veeam Backup & Replication User Guide.
Before You Begin

Make sure that the version of your Microsoft SQL Server is supported. For details, see the System Requirements
section in the Veeam Backup & Replication User Guide.
Creating Application-Aware Backup

To create the application-aware backup job for the Microsoft SQL Server, do the following:
1. In the inventory pane of the Home view, right-click Job s and select Ba ckup > Virtual Machine > VMware
vSp here to launch the New Backup Job wizard.
3. At the Virtual Machines step of the wizard, select the VM.
4. At the Storage step of the wizard, select a backup repository or keep the default settings.
5. At the Guest Processing step of the wizard, do the following:
o Select the E na ble application-aware processing check box.
o Select the E na ble guest file system indexing check box.
VM guest OS file indexing allows you to search for VM guest OS files inside VM backups and perform
1-click restore in Veeam Backup Enterprise Manager. For details, see VM Guest OS File Indexing in the
o In the Guest OS credentials section, specify credentials of a user account to connect to the VM guest
OS. The user account must have Administrator permissions on the Microsoft SQL Server.
o Click the Ap p lications button at the top of the window.
6. In the opened window, select the Microsoft SQL Server from the list and click E d it.
7. In the P rocessing Settings windows, do the following:
o In the Tra nsaction logs section of the General tab, check that the P rocess transaction logs with this
job option is selected.
o On the SQL tab, select Ba ck up log periodically option.
Veeam Backup & Replication will create an auxiliary job that runs continuously and ships database
transaction logs. Transaction logs are shipped to the backup repository and saved in .VLB files next to
other backup job files. Thus, you have a chain of restore points and a set of transaction logs that cover
intervals between these restore points.
8. At the Schedule step of the wizard, define scheduling settings for the job.
Finish button.
10. In the inventory pane of the Home view, expand the La st 24 Hours node to see the created jobs. You must
see two jobs: one that processes the Microsoft SQL Server and the other one that ships transaction logs.
Reference
For more information on application-aware backups, see the Application-Aware Processing section in the Veeam
Data Recovery
Veeam Backup & Replication allows you to restore the following instances:
• Entire VM
• Guest OS files
• VM disks
• VM files
• Application items
Restoring Entire VM
If a VM fails, you can restore it from a backup file. You can restore a single VM or multiple VMs to the original or
new location.
In this section, you will learn how to restore a VM to the original location. For more information on how to
restore the VM to another location, see Restoring Entire VM in the Veeam Backup & Replication User Guide.
Before You Begin

Before you restore a VM from a backup, consider the following:
• You can restore the VM from a backup that has at least one successfully created restore point.
To check whether restore points are created, open the inventory pane of the Home view and select the
Ba ckups node. Then, expand the backup job and verify that there is at least one restore point available for
the VM.
• When you restore the VM to its original location, and the original VM is still running, Veeam Backup &
Replication powers off the original VM and restores only those disks that are included in the backup. All
other disks remain unchanged.
Restoring Entire VM
To restore an entire VM to its original location, do the following.
2. In the inventory pane, select the Ba ckups > Disk node. Expand the backup job in the working area, right-
click a VM in a backup job and select Restore entire VM to launch the Full VM Restore wizard.
3. At the Virtual Machines step of the wizard, select the VM from the list, click the P oint button and choose a
restore point.
If you select an incremental restore point, Veeam Backup & Replication automatically restores data blocks
from the full backup file and the chain of incremental backup files.
4. At the Restore mode step of the wizard, do the following:
o Select the Restore to the original location option.
o Select the Quick rollback check box.
Veeam Backup & Replication will get data blocks that are necessary to revert the VM to an earlier
point in time and will restore only these data blocks from the backup. Quick rollback significantly
reduces the restore time.
IMP ORTANT!
Do not enable the Quick rollback option if the problem occurred at the VM hardware level,
storage level or due to a power loss.
5. At the Secure Restore step of the wizard, enable scanning of the machine or leave the default settings.
If secure restore is enabled, Veeam Backup & Replicationuses antivirus software to scan machine data
before restoring the machine to the production environment. For details, see Secure Restore in the Veeam
6. At the Rea son step of the wizard, specify the reason for restoring the VM.
7. At the Summary step of the wizard, select the P ower on VM after restoring check box and click Finish.
Restoring VM Files
Veeam Backup & Replication can help you restore VM files: VMX, VMXF, NVRAM and VMDK including flat files.
For example, your VM configuration file is missing and you need to restore it. Instead of restoring the entire VM
image, you can restore a single VM file.
You can restore VM files to the latest state or any valid point in time. You can also restore them to the original
or new location.
Before You Begin

Before you restore VM files from a backup, consider the following:
• You can restore VM files a backup that has at least one successfully created restore point.
the VM.
• The server on which you plan to save the restored VM files must be added to the backup infrastructure.
Restoring VM Files
To recover VM files, do the following.
2. In the inventory pane, select the Ba ckups > Disk node. Expand a backup job in the working area, right-click
a VM and choose Restore VM files to launch the Virtual Machines File Restore wizard.
3. At the Restore P oint step of the wizard, select a restore point.
4. At the Destination step of the wizard, do the following:
a. In the Server list, select the server to which you want to restore VM files.
b. In the P a th to folder field, specify the path to the folder where you want to restore files.
c. In the VM files to restore section, select the required files.
5. At the Rea son step of the wizard, specify the reason for restoring files.
6. At the Summary step of the wizard, click Finish to restore the VM files.
Reference
For more information on restoring VM files, see VM Files Restore in the Veeam Backup & Replication User Guide.
Restoring VM Virtual Disks
Veeam Backup & Replication allows you to recover individual virtual disks of a VM. Recovered virtual disks can
be attached to the original VM or to any other VM. This recovery option can be helpful if a VM virtual disk
becomes corrupted.
You can restore VM virtual disk to the latest state or any valid restore point. You can preserve the format of a
recovered virtual disk or convert it to the thin or thick provisioned disk format.
Before You Begin

Before you restore VM virtual disks from a backup, consider the following:
• You can restore virtual disks from a backup that has at least one successfully created restore point.
the VM.
• During the virtual disk restore, Veeam Backup & Replication turns off the target VM (the VM to which you
plan to attach the restored virtual disk) to reconfigure its settings and connect restored disks. It is
recommended that you stop all activities on the target VM for the restore period.
Restoring Virtual Disks

To restore a VM virtual disk and attach it to another VM as a new drive, do the following:
2. In the inventory pane, select the Ba ckups > Disk node. Expand the backup job in the working area, right-
click a VM and select Restore virtual disks to launch the Virtual Disk Restore wizard.
4. At the Disk Mapping step of the wizard, do the following:
a. Click Browse and select the VM to which the restored hard disk must be attached.
b. Select the virtual hard disk that you want to restore.
c. To change the disk format, select the required option from the Restored disk type list: same as the
original disk, thin or thick (lazy or eager zeroed).
d. Select the VM disk in the list and click Cha nge. From the Virtual d evice node list, select a node that is
not occupied yet. Click OK.
5. At the Secure Restore step of the wizard, enable scanning of the machine or leave the default setting.
If secure restore is enabled, Veeam Backup & Replicationuses antivirus software to scan machine data
before restoring the machine to the production environment. For details, see Secure Restore in the Veeam
6. At the Rea son step of the wizard, specify the reason for restoring.
7. At the last step of the wizard, select the P ower on VM after restoring check box and click Finish.
Reference
For more information on restoring virtual disks, see Virtual Disks Restore in the Veeam Backup & Replication
User Guide.
Restoring Guest OS Files
Veeam Backup & Replication allows you to recover individual guest OS files and folders. You can restore files
and folders directly from a backup. This makes the restore process fast and does not require additional storage
resources.
Veeam Backup & Replication supports recovering files for the following file systems:
• Microsoft Windows file systems (FAT, NTFS and ReFS)
• File systems of Linux-based OSes
• Other file systems
In this guide, we omit restoring files from other file systems. This is an advanced scenario that requires
additional actions. For details, see the Restore from Other File Systems section in the Veeam Backup &
Restoring VM Guest OS Files (FAT, NTFS, ReFS)
You can restore individual files from the backup of a Microsoft Windows VM. For this purpose, Veeam Backup &
Replication provides the File-Level Restore wizard.
Before You Begin

Consider the following:
• You can restore guest OS files from a backup that has at least one successfully created restore point.
the VM.
• You cannot restore files from reverse incremental backups.
• You cannot restore files from a VM being currently backed up or replicated.

To restore guest OS files from a Microsoft Windows VM:
a VM and choose Restore guest files > Microsoft W indows to launch the File Level Restore wizard.
3. At the Restore P oint step of the wizard, select the necessary restore point.
4. At the Rea son step of the wizard, specify the reason for restoring VM guest OS files.
5. At the last step of the wizard, click Finish.
6. Veeam Backup & Replication will display the Ba ckup Browser window with the file system tree of the VM.
Right-click the necessary file or folder, select Cop y To.
7. In the opened window, specify the location to which you want to restore files or folders. This location is a
network shared folder or folder on the backup server.
Reference
For more information on restoring guest OS files, see Restore from FAT, NTFS or ReFS in the Veeam Backup &
Restoring VM Guest OS Files (Linux, Unix, etc)
You can restore individual files and folders from file systems of Linux-based OSes. For this purpose, Veeam
Backup & Replication provides the multi-OS File-Level Restore wizard. The multi-OS restore wizard allows you
to restore guest OS files for such OSes as Linux, Unix, BSD, macOS and others.
To restore files from VM guest OS, Veeam Backup & Replication uses a helper appliance. The helper appliance is
a helper VM running a stripped-down Linux kernel that has a minimal set of components. When you perform
file-level restore, Veeam Backup & Replication automatically starts the appliance and mounts VM disks to the
helper appliance as virtual hard drives. Virtual disks are mounted directly from backup files, without prior
extraction of the backup content. This makes the restore process much faster.
Before You Begin

• Check the supported file systems. For details, see the File-Level Restore section in the Veeam Backup &
• You can restore guest OS files from a backup that has at least one successfully created restore point.
the VM.
• You cannot restore files from reverse incremental backups.
• You cannot restore files from a VM being currently backed up or replicated.

To restore guest OS files from a Linux-based VM, do the following.
a VM and select Restore guest files > Linux a nd other to launch the Guest File Restore wizard.
4. At the Help er Host leave the default settings.
5. At the Help er Appliance step of the wizard, click Customize to specify settings for the helper appliance.
Select the ESXi host, resource pool and network on which the helper appliance will run.
If you are restoring files from the NSS file system, select the Restore from Novell Storage Services (NSS)
file system check box.
7. At the last step of the wizard, click Finish. Note that the helper appliance can boot about 20 seconds.
8. Veeam Backup & Replication will display the Ba ckup Browser with the file system tree of the VM. Right-
click a file or folder, select Cop y To.
9. In the Select Destination window, do the following:
a. In the Server field, select the server to which you want to restore files.
b. In the P a th to folder field, specify a destination folder.
10. Click Restore.
Reference
For more information on restoring guest OS files, see Restore from Linux, Unix and Other File Systems in the
Restoring Application Items
If you have an application-aware backup, you can restore application items for Microsoft SQL Server, Microsoft
Active Directory, Microsoft Exchange, Microsoft SharePoint, and Oracle Database. To restore application items,
Veeam Backup & Replication uses special built-in tools — Veeam Explorers.
Veeam Explorers mount the file system of the backed up VM, detect available applications and display their
content in the convenient interface. You can then browse for necessary application items and restore them to
the original or new location. For details, see Veeam Backup Explorers User Guide.
In this section, you will learn how to restore application items for the Microsoft SQL Server. For this purpose,
you will use the backup created in the Creating Application-Aware Backup Job section.
1. In the inventory pane of the Home view, click the Ba ck ups node.
2. In the working area, expand the backup job that processes the VM with Microsoft SQL Server. Right -click
the VM and select Restore application items > Microsoft SQL Server databases to open the Microsoft SQL
Server Database Restore wizard.
3. At the Restore P oint step of the wizard, select the required restore point.
5. At the last step of the wizard, click Finish to start the recovery process.
6. Veeam Backup & Replication will display the Veeam Explorer for Microsoft SQL Server window with
available databases.
7. In the Da tabases pane of the window, right-click a database and select Restore point-in-time state to
< Microsoft SQL Server\Instance Name>.
8. At the Sp ecify restore point step of the wizard:
a. Select the Restore to a specific point in time option.
b. Use the slider to define the exact point in time to which you want to restore the database.
c. Select the P erform restore to the specific transaction check box and click Nex t.
9. At the Fine-tune the restore point step of the wizard, select the transaction to which you want to restore
the database and click Restore.
Veeam Backup & Replication will start restoring the database to the selected transaction. When the
restore process is complete, Veeam Explorer for Microsoft SQL Server will display a popup message with
the results of the restore operation.
Reference
For more information on restoring application items, see Application Items Restore in the Veeam Backup &
Backup Copy
Backup copy allows you to create several instances of the same backup data in different locations. This is the
mechanism that Veeam Backup & Replication provides to help you follow the the 3-2-1 rule:
• 3: You must have at least three copies of your data: the original production data and two backups.
• 2: You must use at least two different types of media to store copies of your data, for example, local disk
and cloud.
• 1: You must keep at least one backup offsite (for example, in the cloud or in a remote site).
In Veeam Backup & Replication, backup copy is a job-driven process. When the backup copying job starts, Veeam
Backup & Replication accesses backup files on the source backup repository, retrieves data blocks for a specific
machine from the backup file, copies them to the target backup repository, and composes copied blocks into a
backup file on the target backup repository. This backup file has the same format as the primary backup file.
Before You Begin

Before you create a backup copy job, consider the following:
• The source and target backup repositories that take part in the backup copy process must be added to t he
backup infrastructure.
• You must have a backup that has been successfully run at least once.
Ba ckups node. Then, expand the backup job and verify that there is at least one restore point available.
Creating Backup Copy Job

To create a backup copy job, do the following:
2. In the inventory pane, right-click Job s and select Ba ckup Copy > Virtual machine >VMware vSphere
b a ckup to launch the New Backup Copy Job wizard.
3. At the Job step of the wizard, do the following:
o Specify a name and description for the backup copy job.
o In the Cop y mode field, check that the Immediate copy is selected.
In the immediate copy mode, Veeam Backup & Replication copies new data as soon as it appears on
the source repository. For more information, see Backup Copy Modes in the Veeam Backup &
4. At the Ob jects step of the wizard, click Ad d and select backup jobs that you want to copy.
5. At the Ta rget step of the wizard, select the backup repository where you want to store the backup copy.
For other settings, keep the default values.
6. At the Da ta Transfer step of the wizard, keep the default settings.
7. At the Schedule step of the wizard, define the period of time when the backup copy job is allowed to
transport data over the network.
8. At the last step of the wizard, select the E na ble the job when I click Finish check box and click Finish. The
job will start running in the continuous mode.
Reference
For more information on the backup copy, see the Backup Copy section in the Veeam Backup & Replication User
Guide.
VM Replication
When you replicate a VM, Veeam Backup & Replication creates the exact copy of the VM in the native
VMware vSphere format on a spare ESXi host and keeps this copy synchronized with the original VM.
Replication provides the best recovery time objective (RTO) values. You actually have the copy of a VM in the
ready-to-start state. That is why replication is recommended for VMs running most critical applications.
Replication is a job-driven process. During the first run of a replication job, Veeam Backup & Replication copies
data of the original VM running on the source host and creates its full replica on the target host. During next job
runs, Veeam Backup & Replication copies only those data blocks that have changed since the last replication job
session. Veeam Backup & Replication writes these changes to restore points, so that you can further publish this
replica in the required state.
Veeam Backup & Replication supports several replication scenarios. Depending on the location of the host
where you plan to store replicas, you can choose the following scenarios:
• Onsite replication
The target host is located in the same site as the source host.
• Offsite replication
The target host is located on another site.
In this section, you will learn how to work with onsite replicas. For more information on offsite replication, see
Replication Scenarios in the Veeam Backup & Replication User Guide.
Reference
For more information on replication, see Replication in the Veeam Backup & Replication User Guide.
Creating Replication Job
Before You Begin
Before you replicate a VM, consider the following:
• You must add all components needed for the replication process to the backup infrastructure. These
components are source and target ESXi hosts, backup proxy and backup repository.
• Due to VMware vSphere limitations, if you change the size of VM disks on the source VM, Veeam Backup &
Replication deletes all available restore points on the VM replica during the next replication job session.
For more information, see this Veeam KB article.
Creating Replication Job

To replicate a VM, do the following:
2. In the inventory pane of the Home view, right-click the Job s node and select Rep lication > Virtual machine
> VMwa re vSphere to launch the New Replication Job wizard.
3. At the Na me step of the wizard, specify a name and description for the replication job. For other settings,
leave the default values.
4. At the Virtual Machines step of the wizard, click Ad d . From the list, select VMs that you want to replicate.
You can also replicate VM containers: folders, resource pools, clusters, vApps, datastores and so on. If you
add a new VM to the container after the replication job is created, Veeam Backup & Replication
automatically updates the job to include the new VM.
5. At the Destination step of the wizard, do the following:
o Click Choose next to the Host or cluster field and select a host on which the VM replica must be
registered.
o Click Choose next to the Resource pool field and select the target resource pool.
o Click Choose next to the VM folder field and select the folder in which the replica must be placed.
o Click Choose next to the Da tastore field and select a datastore where VM replica files must be stored.
6. At the Job Settings step of the wizard, do the following:
o In the Rep ositoryfor replica metadata list, select the backup repository where you want to store the
metadata file.
o In the Rep lica name suffix field, specify the suffix that will be appended to the name of the original
VM.
o In the Restore points to keep, define the number of restore points to keep.
When this number is exceeded, the earliest restore point is removed. Due to VMware restrictions, the
maximum number of restore points for VM replicas is limited to 28.
7. At the Da ta Transfer step of the wizard, leave the default settings.
8. At the Guest Processing step of the wizard, leave the default settings if you do not need transactionally
consistent replicas. Otherwise, select the E na ble application-aware processing check box and specify
credentials of a user account to connect to the VM guest OS. The user account must have Administrator
permissions.
To specify advanced options for VSS processing, click Ap p lications. Select a VM in the list and click E d it. In
the opened window on the General tab, do the following:
o In the Ap p lications section, select Try application processing, but ignore failures to continue the
replication job even if VSS errors occur. If VSS processing fails, the created replica will not be
transactionally consistent but crash consistent.
o In the Tra nsaction logs section, check that the P rocess transaction logs with this job option is
selected.
9. At the Schedule step of the wizard, do the following:
a. Select the Run the job automatically check box. If you do not select this check box, you will have to
launch the job manually. For details, see Start Replication Job Manually.
b. Select the schedule type: daily, monthly or periodically.
In the P eriodically every field, you can select Continiously to run the job in a non-stop manner. A new
session of the job will start as soon as the previous job session completes.
c. Make sure the Retry failed VM processing check box is selected.
Finish button.
12. Open vSp here Client and make sure that the replica appeared on the target host.
Reference
For more information on replica creation, see Creating Replication Jobs in the Veeam Backup & Replication User
Guide.
Monitoring Job Performance in Real Time
When the job is running, you can view job statistics in real time. Statistics include job progress, duration,
processing rate, performance bottlenecks, the amount of read and transferred data, and other details of the job
performance.
To view the job statistics, do the following:
1. In the inventory pane of the Home view, select the Job s > Replication node.
2. In the working area, right-click a job and click Sta tistics.
3. In the opened window, select a VM to view its statistics.
Note that the job must complete with the Success or Warning status. If the job completes with the Failed status,
Veeam Backup & Replication does not create a replica and is not able to perform failover and failback
operations.
You can configure email notifications to get job results. For details, see Configuring Global Email Notification
Settings in the Veeam Backup & Replication User Guide.
Start Replication Job Manually
If you do not schedule a replication job, you must start it manually. To start the job, do the following:
2. In the inventory pane, select Job s > Replication.
3. In the working area, right-click the job and select Sta rt. Wait for the job to complete. Note that the job
must complete with the Success or Warning status.
4. Open vSp here Client and make sure that a VM replica is created.
Replica Failover and Failback
If the original VM in the production site becomes unavailable, you can quickly restore services by failing over to
its replica. When you perform failover, the VM replica takes the role of the original VM. All processes shift from
the original VM on the production host to the VM replica on the secondary host. You can fail over to the latest
state of a replica or to any of its restore points.
When you fail over to the VM replica, Veeam Backup & Replication changes the replica state from Normal to
Failover.
Failover is an intermediate step that needs to be finalized. Depending on a disaster recovery scenario, you can
do one of the following:
• Und o failover
When you undo failover, you switch back to the original VM and discard all changes made to the VM
replica while it was running. The state of the VM replica gets back to Normal. You can use the undo
failover scenario if you have failed over to the VM replica for testing and troubleshooting purposes and
you do not need the changes made to the VM replica.
• P erform failback
When you perform failback, you switch back to the original VM and transfer all changes that took place
while the VM replica was running to the original VM. If the source host is not a vailable, you can restore the
original VM to a new location and switch back to it.
When you perform failback, changes are only transferred but not published. You must test whether the
original VM works with these changes. Depending on the test results, you can do the following:
o Commit failback. When you commit failback, you confirm that the original VM works as expected and
you want to get back to it. The state of the VM replica gets back to Normal.
o Und o failback. If the original VM is not working as expected, you can undo failback and get back to
the VM replica. In this case, the state of the VM replica returns to Failover.
• P erform permanent failover
When you perform failover, you permanently switch from the orig inal VM to a VM replica and use this
replica as the original VM. This scenario is acceptable if the original VM and VM replica are located in the
same site and are nearly equal in terms of resources.
Veeam Backup & Replication supports failover and failb ack operations for several VMs simultaneously. In case
one or several hosts fail, you can use batch processing to restore operations with minimum downtime.
Performing Replica Failover
Before You Begin
Before you perform failover, consider the following:
• For original VMs and replica VMs located in the same network. If you plan to perform replica failover while
the original VM is running, consider temporarily disconnecting the original VM from the network to avoid
IP addresses and/or machine names conflicts.
• To successfully fail over to a VM replica, make sure that this replica has at least one successfully created
restore point.
Rep licas node. Then, select the VM and verify that there is at least one restore point available for the VM.
Performing Failover
To fail over to a VM replica, do the following.
1. In the inventory pane of the Home view, select the Rep licas node.
2. Right-click the replicated VM and select Fa ilover Now to launch the VMwa re Failover W izard.
3. At the Virtual Machines step of the wizard, select the VM from the list, click P oint and choose the restore
point to which you want to fail over.
4. At the Rea son step of the wizard, specify the reason for failover.
5. At the Summary step of the wizard, click Finish to fail over to the VM replica.
Reference
For more information on failover, see the Replica Failover section in the Veeam Backup & Replication User
Guide.
Performing Permanent Failover
To perform permanent failover, do the following:
1. In the inventory pane of the Home view, click the Rep licas node.
2. In the working area, right-click the VM replica and select P ermanent Failover.
3. In the opened window, click Y es to confirm the operation.
Reference
For more information on permanent failover, see the Permanent Failover section in the Veeam Backup &
Undoing Failover
To undo failover, do the following:
2. In the working area, right-click the VM replica and select Und o Failover.
Reference
For more information on undoing failover, see the Undo Failover section in the Veeam Backup & Replication
User Guide.
Performing Failback
You can fail back to a VM in the original or new location. In this section, you will learn how to fail back to the
original VM on the source host. For more information on how to do this on another host, see the Performing
Failback section in the Veeam Backup & Replication User Guide.
Before You Begin

Make sure that the VM replica for which you want to perform failback is in the Failover state. The replica gets
into this state after you perform replica failover.
Performing Failback
To fail back from VM replica to the original VM on the source host, do the following:
2. In the working area, right-click the VM replica and select Fa ilback to production to launch the Fa ilback
W izard.
3. At the Rep lica step of the wizard, click Nex t.
4. At the Destination step of the wizard, select Fa ilback to the original VM .
5. At the Fa ilback Mode step of the wizard, select Auto. In this case, failback will be performed as soon as
VMs are ready.
6. At the Summary step of the wizard, select the P ower on VM after restoring check box and click Finish.
Reference
For more information on failback, see the Replica Failback section in the Veeam Backup & Replication User
Guide.
Committing Failback
To commit a failback, do the following:
2. In the working area, right-click the VM replica and select Commit Failback.
Reference
For more information on committing failback, see the Commit Failback section in the Veeam Backup &
Undoing Failback
To undo a failback, do the following:
2. In the working area, right-click the VM replica and select Und o Failback.
Reference
For more information on undoing failback, see the Undo Failback section in the Veeam Backup & Replication
User Guide.
Enterprise Manager
If you have a geographically dispersed virtual environment with multiple Veeam Backup & Replication servers,
you can use Veeam Backup Enterprise Manager. Veeam Backup Enterprise Manager is a solution that helps
manage multiple backup servers from a single web UI.
You can use Veeam Backup Enterprise Manager to perform the following ta sks:
• Manage jobs configured on different backup servers from a single web console
• Edit and clone jobs
• Monitor the state of jobs
• Generate reports on jobs and backup servers
• Search for guest OS files in all backups and restore these files in one click
For the full list of the Veeam Backup Enterprise Manager capabilities, see About Veeam Backup Enterprise
Manager in the Enterprise Manager User Guide.
NOTE :
Veeam Backup Enterprise Manager is not shipped with the Community edition. For more information, see
Editions Comparison.
Installing Veeam Backup Enterprise
Manager
Before You Begin
• The machine on which you plan to install Veeam Backup Enterprise Manager must meet the system
requirements. For details, see System Requirements in the Enterprise Manager User Guide.
• It is recommended to install the same product version on the Veeam Backup Enterprise Manager server
and Veeam Backup & Replication backup servers.
• If you plan to install Veeam Backup Enterprise Manager on the same machine where the backup server
runs, you must disable all backup and replication jobs and close the Veeam Backup & Replication console.
• Make sure that all necessary ports are opened. For details, see Used Ports in the Enterprise Manager User
Guide.
Installing Enterprise Manager

To install Veeam Backup Enterprise Manager, perform the following:
1. Download the latest version of Veeam Backup & Replication installation image from the Download Veeam
products page.
2. Mount the installation image to the machine on which you plan to install Veeam Backup E nterprise
Manager or burn the image file to a flash drive or other removable storage device.
3. Run the Setup.exe file from the image or disk to open the splash screen.
4. On the splash screen, click the Veeam Backup Enterprise Manager tile in the Sta ndalone components
section to launch the Veea m Backup Enterprise Manager Setup wizard.
5. At the License Agreement step of the wizard, read the license agreements and select check boxes to
accept the terms.
6. At the P rovide License step of the wizard, specify the path to the license key.
If you install Veeam Backup Enterprise Manager on the backup server, you can proceed without providing
a license file. In this case, Veeam Backup Enterprise Manager will use the license that is already installed
on the backup server.
7. At the P rogram Features step of the wizard, leave default settings.
8. At the Sy stem Configuration Check step of the wizard, install missing software components and enable
missing features, if any.
9. At the Default Configuration step of the wizard, click Install to begin installation.
10. When the installation process completes, click Finish to close the wizard.
Adding Backup Servers
To manage backup servers from a single web console, you must add them to Veeam Backup Enterprise Manager.
To add a backup server to Veeam Backup Enterprise Manager, do the following:
1. From the Microsoft Windows Sta rt menu, select P rograms > Veeam > Veeam Backup Enterprise Manager
to la unchVeeam Backup Enterprise Manager.
To access Veeam Backup Enterprise Manager remotely, use the following address:
https://enterprise_manager_server_address:9443
2. In the Username and P a ssword fields, specify credentials of the user with local Administrator rights or the
user who installed Veeam Backup Enterprise Manager.
3. Click Log in.
4. At the top right corner of the opened window, click Configuration to open the Configuration view.
5. Select the Ba ckup Servers tab. In the working area, click Ad d to open the Ba ckup Server Settings window.
6. In the opened window, specify the DNS name or IP address of the backup server you want to add. Provide
the name and password of the user account with local Administrator rights on the added backup server.
7. Click OK.
Veeam Backup Enterprise Manager will start collecting data about all backup and replication jobs on the
added backup server.
Reference
For more information on adding backup servers, see Managing Veeam Backup Servers in the Enterprise Manager
User Guide.
Managing Jobs
Veeam Backup Enterprise Manager allows you to manage jobs that were configured on backup servers: start,
stop, retry, edit and clone jobs.
In this section, you will learn how to clone and then edit jobs. When you clone a job, you create its exact copy .
Configuration details of the created job copy are written to the same Microsoft SQL database where details of
the original job are stored. You can work with the created job both in Veeam Backup Enterprise Manager and in
the Veeam Backup & Replication console on the backup server.
Before You Begin

• Make sure that you have successfully connected backup servers to Veeam Backup Enterprise Manager and
collected data from them. For details, see Adding Veeam Backup Server.
• You have created jobs on the backup server.
Cloning and Editing Job

To clone a job, perform the following.
1. In Veeam Backup Enterprise Manager, click the Job s tab.
2. Select the required job from the list, click Job at the top of the working area and click Clone.
The cloned job has the same name as the original job plus the _cloned suffix.
3. Select the cloned job from the list.
4. At the top of the working area, click Job and select E d it.
5. Follow the steps of the wizard and edit the job settings as required.
6. At the last step of the wizard, click Finish.
Reference
For more information on managing jobs, see Managing Backup Jobs in Veeam Enterprise Manager in the
Enterprise Manager User Guide.
Performing 1-Click File Restore
Veeam Backup Enterprise Manager allows you to search through Microsoft Windows and Linux guest files in
backed up VMs. Once you find the required file, you can immediately restore it using 1-Click file restore
capability. The file can be restored to its original location or saved to a local machine.
Before You Begin

• The Enterprise or Enterprise Plus license is installed on the Veeam Backup Enterprise Mana ger server.
• Make sure that you have successfully connected backup servers to Veeam Backup Enterprise Manager and
collected data from them. For details, see Adding Veeam Backup Server.
• You can search files on machines that have at least one successfully created backup with guest file
indexing enabled. For details, see Creating Application-Aware Backup Job.
Performing 1-Click Restore

To restore a guest OS file, perform the following:
1. In the main view of Veeam Backup Enterprise Manager, click the Files tab.
2. In the Ty p e in machine name field, specify the name of the backed up VM whose file system you want to
browse.
3. In the field with the calendar icon, enter or choose a date and time of a restore point from which you want
to restore files.
4. Click the Mount link and wait for Veeam Backup & Replication to mount the content of the backup file to
the backup server.
After the backup is mounted, you can browse the guest OS files.
5. Select the necessary file from the list.
6. At the top of the working area, click Restore > Keep.
The original and restored files will be kept. The restored file will have the Restored prefix.
7. Click Y es to confirm the operation.
Reference
For more information on 1-click file restore, see Performing 1-Click File Restore in the Enterprise Manager User
Guide.
Performing Self-Restore of VM Guest OS
Files
Self-restore allows you to delegate guest OS file restore from backup administrators to users with local
Administrator privileges on VMs. Users do not have to wait for backup administrators to recover deleted or
modified files and folders.
For self-restore, Veeam Backup Enterprise Manager provides the Self Service File Restore portal. When users log
on to the portal, they see only those VMs where they are members of local Administrators group. Other VMs are
not visible to the users.
Before You Begin

• The Enterprise Plus license is installed on the Veeam Backup Enterprise Manager server. You can use a
valid trial license or paid license.
• The user account under which you plan to perform self-service restore belongs to a trusted domain or the
same domain as the Veeam Backup Enterprise Manager server. Users from untrusted domains cannot use
the self-restore capability.
• The user must be a member of local Administrators group on the VM whose guest OS files you plan to
restore.
The user has access to restore points created after this user gets local Administrator privileges.
• You have successfully connected backup servers to Veeam Backup Enterprise Manager and collected data
from them. For details, see Adding Veeam Backup Server.
• You have at least one successfully created backup with guest file indexing enabled. For details, see
Creating Application-Aware Backup Job.
Performing Self-Restore
To restore VM guest OS files using the Veeam Self-Service File Restore portal:
1. Log in to the VM whose guest OS files you plan to restore. Make sure that the user account under which
you plan to perform self-service restore is added to the local Administrators group on this VM.
2. Log in to Veeam Backup Enterprise Manager using the user account under which you installed the
program.
3. Open the Job s tab and run the job with guest file indexing enabled. You can run the job several times to
produce several restore points.
4. At the top right corner, click Configuration to open the Configuration view.
5. Select the Ba ckup Servers tab. In the working area, click Sta rt Collecting.
Veeam Backup Enterprise Manager will collect data about jobs from the backup server. To check whether
collecting data finished, click the Sessions tab. Make sure that the data collection session has completed
with the Success status.
6. On another machine, open a browser and use the following address to access Veeam Self -Service File
Restore portal remotely:https://enterprise_manager_server_IP_address:9443/selfrestore
7. Log in to the portal. Specify the user account with local Administrators privileges on the machine for
which you plan to restore files. See the first step.
8. The portal will display only one tab — Files. At the top of the working area, click the p ick different machine
link. Select the required VM.
9. Click the field with the calendar icon and choose the restore point from which you want to restore data.
10. At the top of the working area, click Mount.
11. Find the necessary file or folder, select it. At the top-right corner, click Other Actions > Restore >
Overwrite.
The original file will be overwritten.
Reference
For more information on self restore, see Using Self-Service File Restore Portal to Restore Machine Guest Files
in the Enterprise Manager User Guide.
Backing Up Physical Machines
To back up physical machines, Veeam Backup & Replication uses Veeam Agents: Ve eam Agent for Microsoft
Windows and Veeam Agent for Linux.
You do not need to install, set up and operate Veeam Agent on every machine whose data you want to protect.
Instead, you can perform the whole set of deployment, administration, data protection and disaster recovery
tasks on computers remotely from the Veeam Backup & Replication console.
How to back up physical machines

To back up physical machines using Veeam Backup & Replication, you must do the following:
1. Create a protection group
When you create a protection group, you add individual machines or Active Directory containers to the
protection group. Veeam Backup & Replication automatically installs agents and other required
components on the machines included in the protection group.
2. Create an Agent backup job
In the Veeam Backup & Replication console, create an agent job that will back up machines included in the
protection group.
Reference
For more information on agents, see the following topics:
• Licensing Requirements
• Veeam Agent Management User Guide
• Veeam Agent for Linux 3.0 User Guide
• Veeam Agent for Microsoft Windows User Guide
Creating Protection Group
In Veeam Backup & Replication, protection groups are logical containers that pool protected computers of a
specific type into groups. For example, you can create a protection group for computers of the same type
(laptops, workstations or servers) or computers running the same OS type to simplify their management.
You can add individual machines or Active Directory objects that include several machines to the protection
group. In this section. you will learn how to create the protection group with Active Directory objects.
TIP :
If you plan to manage only a small number of computers, you can add the necessary computers directly to
a Veeam Agent backup job. Veeam Backup & Replication will automatically add such computers to the
Ma nually Added protection group. For details, see Protection Groups in the Veeam Agent Management
Guide.
Before You Begin

• Make sure that all computers added to the protection group are powered on and can be accessed over the
network.
• If you add an Active Directory container to a protection group, it is not recommended to add a computer
that exists in this container to another protection group.
Creating Protection Group

To create a protection group, do the following:
1. In the inventory pane of the Inventory view, right-click the P hy sical & Cloud Infrastructure node and select
Ad d protection group to launch the New P rotection Group wizard.
2. At the Na me step of the wizard, specify a name and description for the protection group.
3. At the Ty p e step of the wizard, select Microsoft Active Directory objects.
Active Directory objects can be the following: entire domain, container, organization unit, group,
computer or cluster. Protection groups that include Active Directory objects are dynamic. Veeam Backup &
Replication discovers these computers and deploy Veeam Agent on them during the next rescan session.
4. At the Active Directory step of the wizard, click Cha nge near the Sea rch for objects in this domain field. In
the opened window, do the following:
o In the Doma in controller or domain DNS name field, type a name of the domain controller or domain
whose objects you want to include in the protection group.
o In the P ort field, leave the default value.
o Near the Account field, click Ad d and specify user credentials. This user must ba a member of the
DOMAIN\Administrators group. Click OK.
o Click OK.
5. Click Ad d near the Selected objects field. In the Ad d Objects window, select the necessary Active Directory
object and click OK.
6. At the E x clusions step of the wizard, leave the default settings.
7. At the Credentials step of the wizard, specify credentials to connect to computers included in the
protection group.
If you want to use the same credentials for all computers in the protection group, select the necessary
user account from the Ma ster a ccount list. The account must have administrative permissions on all
computers that you have added to the protection group .
You can also specify credentials for individual computes. For details, see Specify Credentials in the Veeam
Agent Management Guide.
8. At the Op tions step of the wizard, leave the default settings.
9. At the Review step of the wizard, review the components that will be installed. Click Ap p ly.
10. At the Ap p ly step of the wizard, Veeam Backup & Replication creates the configured protection group.
Wait for the operation to complete and click Nex t.
11. At the Summary step of the wizard, select the Run d iscovery when I click Finish check box and click Finish.
Reference
For more information on creating protection groups, see Creating Protection Groups in the Veeam Agent
Management Guide.
Creating Veeam Agent Backup Job
To back up physical machines, you must configure a Veeam Agent backup job in the Veeam Backup & Replication
console. In Veeam Backup & Replication, you can create Veeam Agent backup jobs of the following types:
• Ba ckup job
The backup job runs on the backup server, like VM backup jobs. The backup job is intended for computers
that are connected to the backup server. This connection must not be interrupted.
• Ba ckup policy
The backup policy describes configuration of individual Veeam Agent backup jobs that run on protected
computers. The backup policy is intended for computers that are connected to the backup ser ver. The
connection may be interrupted for short periods of time. For example, when you move your laptop from
one location to another. Veeam Backup & Replication uses the backup policy as a template and applies
settings from the backup policy to Veeam Agents that run on computers specified in the backup policy.
In this guide, we do not detail backup policy. For more information, see Creating Veeam Agent Backup
Policy.
Veeam Backup & Replication lets you create backup jobs for Microsoft Windows and Linux computers. In this
section, you will learn how to create a Veeam Agent backup job for Microsoft Windows computes. For details on
how to create back jobs for Linux computes, see Creating Agent Backup Job for Linux Computers in the Veeam
Agent Management Guide.
Before You Begin

• You must have at least one protection group. For details, see Creating Protection Group.
• You can create Veeam Agent backups on a Veeam backup repository only. Other types of target locations
are not supported.
• Veeam Agent for Microsoft Windows does not back up data to which symbolic links are targeted. It only
backs up the path information that the symbolic links contain. After restore, identical symbolic links are
created in the restore destination.
Creating Veeam Agent Backup Job
1. On the Home tab, click Ba ckup Job > W indows computer to open the New Agent Backup Job wizard.
2. At the Job Mode step of the wizard, specify protection settings for the backup job:
o In the Ty p e list, select Server to add to the backup job standalone servers that have permanent
connection to the backup server.
o In the Mod e list, select Ma naged by backup server.
When you create a Veeam Agent backup job managed by the backup server, Veeam Backup &
Replication saves the job settings in its database. Veeam Backup & Replication performs all
management tasks for the Veeam Agent backup job: starts a job upon the defined schedule, allocates
backup infrastructure resources and so on.
4. At the Comp uters step of the wizard, click Ad d and select one or several protection groups and/or
computers in the list. Click OK.
5. At the Ba ckup Mode step of the wizard, select E ntire computer.
When you restore data from such a backup, you are able to recover the entire computer image as well as
data on specific computer volumes: files, folders and application data.
6. At the Storage step of the wizard, select the backup repository where you want to store your back ups. For
other settings, leave the default values.
7. At the Guest Processing step of the wizard, leave the default settings.
8. At the Schedule step of the wizard, define scheduling settings for the job.
Finish button.
Reference
For more information on creating Veeam Agent backup jobs for Microsoft Windows computers, se e Creating
Agent Backup Job for Windows Computers in the Veeam Agent Management Guide.
Restoring Data of Physical Machines
Veeam Backup & Replication allows you to restore data of physical machines. You can perform the following
data restore tasks with Veeam Agent backups:
• Restoring Veeam Agent Backup to vSphere VM
• Restoring Veeam Agent Backup to Hyper-V VM
• Restoring to Microsoft Azure
• Restoring to Amazon EC2
• Restoring Volumes
• Restoring Files and Folders
• Restoring Application Items
In this section, you will learn how to restore computer files and folders. For more information on other restore
processes, follow the links in the list.
Restoring Files and Folders

The procedure of file-level restore from a Veeam Agent backup is similar to the same procedure for a VM
backup. The difference is that you select a Veeam Agent backup instead of a VM backup in the File Level Restore
wizard. To learn more, see Restoring VM Files.

Veeam Backup 11 0 Quick Start Guide Vsphere

Uploaded by

Copyright:

Available Formats

Veeam Backup 11 0 Quick Start Guide Vsphere

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Veeam Backup 11 0 Quick Start Guide Vsphere

Uploaded by

Copyright:

Available Formats

Veeam Backup & Replication

• Full documentation set: veeam.com/documentation-guides-datasheets.html

• Veeam R&D Forums: forums.veeam.com

Help and Support

For technical support and assistance, use the following resources:

• Veeam R&D Forums

• Customer Support Portal

• Create crash-consistent and application-consistent backups of virtual and physical machines.

• Create VM replicas and switch to them in case of a disaster.

• Automate transferring of backups to tapes and other external repositories.

What Else Can I Do?

• Infrastructure servers and hosts

• The processing load is moved from backup server to backup proxy.

• System Requirements for Backup Server

• System Requirements for Backup Proxy Server

• System Requirements for Backup Repository Server

• System Requirements for Enterprise Manager

• System Requirements for Supported Applications

• System Requirements for Veeam Explorer for Microsoft Active Directory

• System Requirements for Veeam Explorer for Microsoft Exchange

• System Requirements for Veeam Explorer for Microsoft SharePoint

• System Requirements for Veeam Explorer for Microsoft SQL Server

• System Requirements for Veeam Explorer for Oracle

• Backup Server Connections

• Microsoft Windows Server Connections

• Linux Server Connections

• Backup Proxy Connections

• Backup Repository Connections

• Mount Server Connections

• Veeam Backup Enterprise Manager Connections

• Veeam Explorer for Microsoft Active Directory Connections

• Veeam Explorer for Microsoft Exchange Connections

• Veeam Explorer for Microsoft SharePoint Connections

• Veeam Explorer for Microsoft SQL Server Connections

• Veeam Explorer for Oracle Connections

• Veeam Agent for Microsoft Windows Connections

• Veeam Agent for Linux Connections

1. Install Veeam Backup & Replication

2. Add virtual infrastructure servers

3. Configure backup proxy

4. Configure backup repository

5. Configure object storage repository (optional)

6. Configure scale-out backup repository (optional)

Before You Begin

Installing Veeam Backup & Replication

Starting Veeam Backup & Replication

2. In the authentication window, click Connect.

Before You Begin

Adding Infrastructure Server

To add the account, do the following:

Before You Begin

To add the account, do the following:

2. At the Server step of the wizard, do the following:

Before You Begin

To add the account, do the following:

• Amazon S3, Amazon S3 Glacier and Amazon Snowball Edge

Before You Begin

4. At the Account step of the wizard, specify the connection settings:

Before You Begin