Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Espm Ce

    Uploaded by

    Ba Hoàng
    This document provides specifications for a plug-in signal conditioner model PM that can be used with potentiometers. The model PM accepts a potentiometer input between 100 ohms and 10k ohms, and provides various DC voltage or current outputs proportional to the potentiometer position. It has adjustable zero and span controls, and can be powered by various AC or DC voltages. Dimensions and connection terminal assignments are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Espm Ce

    Uploaded by

    Ba Hoàng
    14 views3 pages
    This document provides specifications for a plug-in signal conditioner model PM that can be used with potentiometers. The model PM accepts a potentiometer input between 100 ohms and 10k ohms, and provides various DC voltage or current outputs proportional to the potentiometer position. It has adjustable zero and span controls, and can be powered by various AC or DC voltages. Dimensions and connection terminal assignments are provided.

    Original Title

    espm_ce

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a plug-in signal conditioner model PM that can be used with potentiometers. The model PM accepts a potentiometer input between 100 ohms and 10k ohms, and provides various DC voltage or current outputs proportional to the potentiometer position. It has adjustable zero and span controls, and can be powered by various AC or DC voltages. Dimensions and connection terminal assignments are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views3 pages

    Espm Ce

    Uploaded by

    Ba Hoàng
    This document provides specifications for a plug-in signal conditioner model PM that can be used with potentiometers. The model PM accepts a potentiometer input between 100 ohms and 10k ohms, and provides various DC voltage or current outputs proportional to the potentiometer position. It has adjustable zero and span controls, and can be powered by various AC or DC voltages. Dimensions and connection terminal assignments are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    MODEL: PM

    Plug-in Signal Conditioners M-UNIT Voltage


    1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
    2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
    POTENTIOMETER TRANSMITTER 3: 0 – 1 V DC (Load resistance 3000 Ω min.)
    (CE, non-isolated) 4: 0 – 10 V DC (Load resistance 10 kΩ min.)
    Functions & Features 5: 0 – 5 V DC (Load resistance 5000 Ω min.)
    • Providing a DC output proportional to a potentiometer or 6: 1 – 5 V DC (Load resistance 5000 Ω min.)
    slidewire position input 4W: -10 – +10 V DC (Load resistance 20 kΩ min.)
    • Constant voltage excitation allows use with pots with total 5W: -5 – +5 V DC (Load resistance 10 kΩ min.)
    resistances from 100 Ω – 10 kΩ without affecting accuracy 0: Specify voltage (See OUTPUT SPECIFICATIONS)
    • 50 % zero/span adjustments with minimal interaction
    • High-density mounting
    [2] POWER INPUT
    Typical Applications AC Power
    • Tank levels B: 100 V AC
    • Positions C: 110 V AC
    D: 115 V AC
    F: 120 V AC
    50 G: 200 V AC
    [1.97] H: 220 V AC
    J: 240 V AC
    DC Power
    80
    [3.15] S: 12 V DC
    R: 24 V DC
    V: 48 V DC
    127
    [5]
    mm [inch]
    [3] OPTIONS (multiple selections)
    Standards & Approvals (must be specified)
    /CE: CE marking
    MODEL: PM–[1]–[2][3]
    Other Options
    blank: none
    ORDERING INFORMATION /Q: Option other than the above (specify the specification)
    • Code number: PM-[1]-[2][3]
    Specify a code from below for each of [1] through [3].
    SPECIFICATIONS OF OPTION: Q (multiple selections)
    (e.g. PM-A-B/CE/Q)
    COATING (For the detail, refer to M-System's web site.)
    • Special output range (For codes Z & 0)
    /C01: Silicone coating
    • Specify the specification for option code /Q
    /C02: Polyurethane coating
    (e.g. /C01/S01)
    /C03: Rubber coating
    TERMINAL SCREW MATERIAL
    INPUT POTENTIOMETER /S01: Stainless steel
    Total resistance 100 Ω – 10 kΩ

    GENERAL SPECIFICATIONS
    [1] OUTPUT Construction: Plug-in
    Current Connection: M3.5 screw terminals
    A: 4 – 20 mA DC (Load resistance 750 Ω max.) Screw terminal: Chromated steel (standard) or stainless
    B: 2 – 10 mA DC (Load resistance 1500 Ω max.) steel
    C: 1 – 5 mA DC (Load resistance 3000 Ω max.) Housing material: Flame-resistant resin (black)
    D: 0 – 20 mA DC (Load resistance 750 Ω max.) Isolation: Input or output to power
    E: 0 – 16 mA DC (Load resistance 900 Ω max.) Zero adjustment: 0 – 50 % of total resistance (front)
    F: 0 – 10 mA DC (Load resistance 1500 Ω max.) Span adjustment: 50 – 100 % of total resistance (front)
    G: 0 – 1 mA DC (Load resistance 15 kΩ max.)
    Z: Specify current (See OUTPUT SPECIFICATIONS)
    PM SPECIFICATIONS ES-1351-CE Rev.7 Page 1/3

    https://www.m-system.co.jp/
    MODEL: PM
    INPUT SPECIFICATIONS
    Minimum span: 50 % of total resistance
    Excitation: 0.5 V DC

    OUTPUT SPECIFICATIONS
    ■ DC Current: 0 – 20 mA DC
    Minimum span: 1 mA
    Offset: Max. 1.5 times span
    Load resistance: Output drive 15 V max.
    ■ DC Voltage: -10 – +12 V DC
    Minimum span: 5 mV
    Offset: Max. 1.5 times span
    Load resistance: Output drive 1 mA max. at ≥ 3 V

    INSTALLATION
    Power input
    • AC: Operational voltage range: rating ±10 %,
    50/60 ±2 Hz, approx. 2 VA
    •DC: Operational voltage range: rating ±10 %,
    ripple 10 %p-p max., approx. 2 W (80 mA at 24 V)
    Operating temperature: -5 to +60°C (23 to 140°F)
    Operating humidity: 30 to 90 %RH (non-condensing)
    Mounting: Surface or DIN rail
    Weight: 300 g (0.66 lb)

    PERFORMANCE in percentage of span


    Accuracy: ±0.1 %
    Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
    Response time: ≤ 0.5 sec. (0 – 90 %)
    Line voltage effect: ±0.1 % over voltage range
    Insulation resistance: ≥ 100 MΩ with 500 V DC
    Dielectric strength: 2300 V AC @1 minute
    (input or output to power to ground)

    STANDARDS & APPROVALS


    EU conformity:
    EMC Directive
    EMI EN 61000-6-4
    EMS EN 61000-6-2
    Low Voltage Directive
    EN 61010-1
    Installation Category II
    Pollution Degree 2
    Input or output to power: Reinforced insulation (300 V)
    RoHS Directive

    PM SPECIFICATIONS ES-1351-CE Rev.7 Page 2/3

    https://www.m-system.co.jp/
    MODEL: PM
    EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
    CLAMP
    (top & bottom)
    7.8 [.31]

    [.79]
    20
    DIN RAIL
    35mm wide 6 5 4 3
    80 [3.15]

    80 [3.15]
    2–4.5 [.18] dia.
    MTG HOLE
    15 [.59] deep
    7 8 1 2
    8–M3.5
    SCREW
    50 [1.97] 107 [4.21] 40 [1.57]
    127 [5] (3.3 [.13]) 50 [1.97]

    • When mounting, no extra space is needed between units.

    SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

    POTENTIOMETER
    max. Excitation Volt.
    3 + 3 Z S
    Generator
    Low Drift Output
    2 4 1 +
    Amplifier Driver
    OUTPUT
    1 – 5 2 –
    min.
    6 7 U(+)
    POWER
    8 V(–)

    Base Socket

    Specifications are subject to change without notice.

    PM SPECIFICATIONS ES-1351-CE Rev.7 Page 3/3

    https://www.m-system.co.jp/

    You might also like