CATALOGUE > Release 8.

8 CONTROL > Series 9 valves and solenoid valves

Series 9
valves and solenoid valves

5/2 and 5/3-way CC CO

Sizes 1 - 2 - 3
According to the standard ISO 5599/1

CONTROL
Series 9 electropneumatically or
pneumatically operated valves have
been designed with sizes 1, 2 and 3, as
recommended by the ISO Standards.
The ease of pneumatic and electrical
wiring makes these valves extremely
flexible.

GENERAL DATA
Operating pressure max. press. 10 bar (for minimum pressures see descriptions)
Nominal pressure 6 bar
Nominal flow ISO 1 = 900 Nl/min
ISO 2 = 1610 Nl/min
ISO 3 = 4350 Nl/min
Operating temperature 0 ÷ 60°C (with dry air at -20°C)
Fluid filtered air, without lubrication.
If lubricated air is used, it is recommended to use ISOVG32 oil and to never interrupt the lubrication.
Electropneumatic interface according CNOMO Standards

Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.
2/2.20.01
 CONTROL > Series 9 valves and solenoid valves CATALOGUE > Release 8.8

CODING EXAMPLE

9 5 1 - 000 - P16 - 23 - U7 7
9 SERIES

5 NUMBER OF WAYS - POSITIONS:

5 = 5/2
6 = 5/3 CC
7 = 5/3 CO

1 SIZE:
1 = size 1
2 = size 2
3 = size 3

000 BODY DESIGN:

2
000 = valve body

P 16 ACTUATION:
33 = pneumatic, pneumatic return
34 = pneumatic, differential pneumatic return
35 = pneumatic, mechanical spring return
P11 = double solenoid (horizontal solenoids)
P15 = single solenoid, spring return (horizontal solenoids)
CONTROL

P16 = solenoid, pneumatic spring return (horizontal solenoids)

23 SOLENOID INTERFACE:
23 = A531 - BC2 (Cnomo norm)

U7 SOLENOID MATERIAL / SOLENOID DIMENSIONS:

A8 = PPS / 30 x 30
G7 = PA / 22 x 22
G8 = PA / 30 x 30 (24 V DC only)
G9 = PA / 22 x 58
H8 = PA 6 V0 / 30 x 30
U7 = PET / 22 x 22

7 SOLENOID VOLTAGE:
see the solenoids section on page 2.2.35.01

2/2.20.02 Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.
 CATALOGUE > Release 8.8 CONTROL > Series 9 valves and solenoid valves

5/2-way solenoid valves, monostable - ISO 1, ISO 2, ISO 3

Available with electropneumatic

actuation and spring return, they
are suitable for mounting on a
sub-base.

The following is supplied:

2
1x interface seal
4x fixing screws

CONTROL
DIMENSIONS
Mod. Size ISO B L1 L2 L3 H H1 H2 Min. operating pressure Symbol
951-000-P15-23 1 38 153 108 146 32 43 58 2,5 EV18
952-000-P15-23 2 51 173 128 166 33 44 59 2,5 EV18
953-000-P15-23 3 65 218 173 211 45 56 71 2,5 EV18
951-000-P16-23 1 38 153 108 146 32 43 58 2,5 EV20
952-000-P16-23 2 51 173 128 166 33 44 59 2,5 EV20
953-000-P16-23 3 65 218 173 211 45 56 71 2,5 EV20

5/2-way, 5/3-way solenoid valves, bistable - ISO 1, ISO 2, ISO 3

Available with electropneumatic

actuation and spring return, they
are suitable for mounting on a
sub-base.

The following is supplied:

1x interface seal
4x fixing screws

DIMENSIONS
Mod. Size ISO B L1 L2 L3 H H1 H2 Min. operating pressure Symbol
951-000-P11-23 1 38 208 118 194 32 43 58 2,5 EV23
952-000-P11-23 2 51 228 138 214 33 44 59 2,5 EV23
953-000-P11-23 3 65 273 183 259 45 56 71 2,5 EV23
961-000-P11-23 1 38 208 118 194 32 43 58 2,5 EV28
962-000-P11-23 2 51 228 138 214 33 44 59 2,5 EV28
963-000-P11-23 3 65 273 183 259 45 56 71 2,5 EV28
971-000-P11-23 1 38 208 118 194 32 43 58 2,5 EV32
972-000-P11-23 2 51 228 138 214 33 44 59 2,5 EV32
973-000-P11-23 3 65 273 183 259 45 56 71 2,5 EV32

Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.
2/2.20.03
 CONTROL > Series 9 valves and solenoid valves CATALOGUE > Release 8.8

5/2 -way valves, monostable, bistable - ISO 1, ISO 2, ISO 3

The Series 9 valves with ISO

interface, size 1, 2 and 3, are
available with the following types of
actuation:
- pneumatic, with spring return
- pneumatic actuation and
differential return
- pneumatic actuation and return

The following is supplied:

2
1x interface seal
4x fixing screws
CONTROL

DIMENSIONS
Mod. Size ISO B L2 H Min. operating pressure Symbol
951-000-35 1 38 98 32 2,5 VP04
952-000-35 2 51 118 33 2,5 VP04
953-000-35 3 65 163 45 2,5 VP04
951-000-34 1 38 98 32 2 VP05
952-000-34 2 51 118 33 2 VP05
953-000-34 3 65 163 45 2 VP05
951-000-33 1 38 98 32 2 VP06
952-000-33 2 51 118 33 2 VP06
953-000-33 3 65 163 45 2 VP06

5/3-way valve, monostable, with stable central position - ISO 1, 2, 3

The Series 9 valves with ISO

interface, size l, 2 and 3, are
available with pneumatic actuation
and central resetting by a spring.
There are two types of function:
- with closed centres
- with open centres

The following is supplied:

1x interface seal
4x fixing screws

DIMENSIONS
Mod. Size ISO B L2 H Min. operating pressure Symbol
961-000-33 1 38 108 32 2,5 VP08
962-000-33 2 51 128 33 2,5 VP08
963-000-33 3 65 173 45 2,5 VP08
971-000-33 1 38 108 32 2,5 VP09
972-000-33 2 51 128 33 2,5 VP09
973-000-33 3 65 173 45 2,5 VP09

2/2.20.04 Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.
 CATALOGUE > Release 8.8 CONTROL > Series 9 valves and solenoid valves

Single sub-base side outlets (VDMA 24345)

2
DIMENSIONS

CONTROL
Mod. Size A B C D E F G H H1 H2 L L1 O R1 R2 S
901-F1A 1 43 24 58 10.5 21.5 10.5 23.5 48 32 10 110 84 5.5 G1/8 G1/4 98
902-F2A 2 56 30 74 14 26 14 30 57 40 13 124 95 6.5 G1/8 G3/8 112
903-F3A 3 68 32 90 17 17 17 22 71 32 18 149 119 6.5 G1/8 G1/2 136

Single sub-base with rear outlets (VDMA 24345)

DIMENSIONS
Mod. Size A B C D E H H1 H2 L L1 M N O P R R1 R2 S T
901-G1A 1 46 23 61 23 7.5 46 30 10 110 84 18 36 5.5 28 M5 G1/8 G1/4 98 5
902-G2A 2 56 28 72 28 8 56 35 13 124 95 24 48 6.5 38 M6 G1/8 G3/8 112 6.5
903-G3A 3 68 34 90 34 10 71 32 18 149 119 32 64 6.5 48 M8 G1/8 G1/2 136 9

Manifold sub-base with com. exhausts and inlet (VDMA 24345)

The following is supplied:
2x fixing screws
3x O-ring

DIMENSIONS
Mod. Size B C H H1 L L1 O P1 P2 P3 P4 R1 R2 R3 S V V1 V2
901-C1A 1 26 8.5 43 44 110 85 5.5 1.5 3 7.5 71 G1/8 G1/4 M5 95 8 8 6 Note: complete with fixing screws
902-C2A 2 30 9 56 45 135 100 6.5 5 3 6 86 G1/8 G3/8 M6 115 11 11 8 and O-ring.
903-C3A 3 38 10 71 54 190 140 9 6 3 8 130 G1/8 G1/2 M8 168 13 13 8

Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.
2/2.20.05
 CONTROL > Series 9 valves and solenoid valves CATALOGUE > Release 8.8

End block for manifold sub-base (VDMA 24345)

The following is supplied:
2x end blocks (1 pair)
2x fixing screws
3x OR

2
DIMENSIONS
CONTROL

Mod. Size A A1 H H1 H2 H3 H4 L O O1 P P1 R ØR1 ØR2 S T V2

901-H1 1 56 48 22 46 22 25 22 110 5,5 7 28 11 G3/8 15 22,1 95 2 6
902-H2 2 68 63 26 47 23 25 24 135 6,5 9 35 13 G1/2 18,5 28,7 115 2 8
903-H3 3 104 94 30 56 22 25 25 190 9 12 52 15 G1 28 38 168 2,7 8

Interface with front outlets (VDMA 24345)

The following is supplied:
2x fixing screws
2x OR

DIMENSIONS
Mod. Size A B D H H1 H2 H3 L O P P1 P2 P3 P4 R T
901-N1 1 26 22 19 42 37 7.5 1.5 110 5.5 3 71 95 25 12 G1/4 1.4
902-N2 2 30 29 23 55 40 6 5 135 6.5 3 86 115 26 14 G3/8 1.4
903-N3 3 38 36 27 70 45 8 6 190 9 3 130 168 29 17 G1/2 1.4

End blocks for manifold bases with front outlets

The following is supplied:
2x end blocks (1 pair)
2x fixing screws
3x OR

DIMENSIONS
Mod. Size A B C D E F G H L M N P P1 R S T U Z
901-HN1 1 56 14.5 8 32 48 2.5 6 24 110 9 28 25.5 1 3/8” 96 G1/8 5,5 3,5

2/2.20.06 Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.
 CATALOGUE > Release 8.8 CONTROL > Series 9 valves and solenoid valves

Manifold bases with comm. inlet and exhaust ports and front outlet
The following is supplied:
2x fixing screws
3x OR

CONTROL
DIMENSIONS
Mod. Size A B C D E F G H L M N P R S T
901-N1A 1 21.5 96 5 12 19 25 96 43 110 36 5.5 5.5 M5 G1/4 6.2

Assembly of manifold sub-base (VDMA 24345)

DIMENSIONS
Size A B C D E F OR UNI 5739 G UNI 57588 G1 H L O
1 n°D+2C n°D+C 22 43 28 3068 M5X20 M5 46 110 7
2 n°D+2C n°D+C 26 56 35 3093 M6X25 M6 47 135 9
3 n°D+2C n°D+C 30 71 52 4125 M8X25 M8 56 190 12

Assembly for front outlet manifold sub-bases

DIMENSIONS
Size A B C D E F G H L M N UNI 5931 P. UNI 5588 R S
1 N° D+2E 110 48 43 32 28 n°D+25 1 3,5 G1/4 G1/8 M5X14 M5 25,5

Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.
2/2.20.07
 CONTROL > Series 9 valves and solenoid valves CATALOGUE > Release 8.8

Cover plate for unused positions

The following is supplied:

1x seal
4x screws

2 Mod.
901-TP

Mounting example
CONTROL

Separation tap lines 1 - 3 - 5 to be used with

manifold type 901-C1A and 902-C2A

Mod.
901-C1A/TP
902-C2A/TP

Separation joint

Separation joint to be used with manifold type 901N

Mod. 1 - 3 - 5 closed
901-N1A/T

Separation joint

Separation joint to be used with manifold type 901N.

P plugged.

Mod. 1 closed
901-N1A/TP

2/2.20.08 Products designed for industrial applications.

General terms and conditions for sale are available on www.camozzi.com.