Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Engine Spec-AS8900-DBL5736

    Uploaded by

    Brad
    This document summarizes the specifications of an AS8900 engine including: 1. It produces 185 kW at 1500 rpm and 205 kW at 1800 rpm. 2. It has 6 cylinders with a displacement of 8.82 L. 3. Its cooling system uses a fresh water forced circulation method with a 12 L water capacity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Engine Spec-AS8900-DBL5736

    Uploaded by

    Brad
    44 views2 pages
    This document summarizes the specifications of an AS8900 engine including: 1. It produces 185 kW at 1500 rpm and 205 kW at 1800 rpm. 2. It has 6 cylinders with a displacement of 8.82 L. 3. Its cooling system uses a fresh water forced circulation method with a 12 L water capacity.

    Original Description:

    185 KW AGG engine data and specification sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the specifications of an AS8900 engine including: 1. It produces 185 kW at 1500 rpm and 205 kW at 1800 rpm. 2. It has 6 cylinders with a displacement of 8.82 L. 3. Its cooling system uses a fresh water forced circulation method with a 12 L water capacity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    44 views2 pages

    Engine Spec-AS8900-DBL5736

    Uploaded by

    Brad
    This document summarizes the specifications of an AS8900 engine including: 1. It produces 185 kW at 1500 rpm and 205 kW at 1800 rpm. 2. It has 6 cylinders with a displacement of 8.82 L. 3. Its cooling system uses a fresh water forced circulation method with a 12 L water capacity.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Model: AS8900 Engine code:DBL5736

    185 kW@1500 rpm | 205 kW@1800 rpm

    Engine Speed Type of Engine Power Generator Power Mechanism


    r/min Operation kW kVA
    Type Over head valve
    1500 Prime Power 185 200
    Number of valve Intake 2, exhaust 2 per cylinder
    1500 Standby Power 204 220 Valve lashes at cold Intake 0.25mm
    1800 Prime Power 205 227.5 Exhaust 0.50mm

    1800 Standby Power 226 250

    · The engine performance is as per GB/T2820 Valve Timing


    · Ratings are based on GB/T1147.1. Opening Close
    Intake valve 20.9°BTDC 44.9°ABDC
    · Prime Power:
    -There is no time limit in the case of variable load operation. Exhaust valve 51.7°BBDC 11.7°ATDC
    In any 250hours of continuous operation period,
    the variable load of average work load less than
    70%of the prime power.
    The operation time in the situation of 100%prime power Fuel Consumption
    no more than 500 hours. Permit 10%overload running
    1hours in any 12 hours of continuous operation period. Power L/h（1500r/min） L/h（1800r/min）
    The overload 10% power running time of every year no 15.7
    25% 13.4
    more than 25 hours.
    50% 22.8 26.2
    · Standby Power: 75% 32.8 37.4
    -The annual total standby power load should be less than80%
    and the average running time shall be less than 200 hours. 100% 44.1 50.9
    Among them the standby power point should be no more 110% 49.6 57.2
    than 25 hours a year.

    Specifications
    Fuel System
    Engine Model AS8900
    Injection pump Longkou in-line “P” type
    In-line,4 strokes,
    Governor RSV
    4 valves,
    Feed pump Mechanical type
    Engine Type water-cooled ,
    Injection nozzle Multi hole type
    Turbo charged
    Opening pressure 250 kg/cm2
    with aftercooler
    Fuel filter Full flow, car tridge type
    Combustion type Direct injection
    Used fuel Diesel fuel oil
    Cylinder Type Wet liner

    Number of cylinders 6

    Bore × stroke 114× 144mm Lubrication System

    Displacement 8.82 L Lub. Method Fully forced pressure feed type

    Compression ratio 18: 1 Oil pump Gear type driven by crankshaft

    Firing order 1-5-3-6-2-4 Oil filter Full flow, car tridge type

    Injection timing 7.5°BTDC Oil pan capacity High level 19 liters

    Dry weight Approx. 740kg Low level 15 liters

    Dimension (L×W×H) 1422 ×762×1186 mm Angularity limit Front down 25 deg

    Rotation SAE NO.2 Front up 35 deg

    Fly wheel housing SAE NO.11.5 Side to side 35 deg

    (tooth number of gear:125) Lub. Oil Refer to Operation Manual

    www.aggpower.co.uk
    Cooling System Engineering Data

    Cooling method Fresh water forced circulation Heat rejection to coolant 18.6kcal/sec（1500r/min）
    Water capacity 12 liters 20.6kcal/sec（1800r/min）
    (engine only) Heat rejection to intercooler 11.6 m3/min （1500r/min）
    Lid Min. pressure 70kPa 12.9 m3/min （1800r/min）
    Water pump Centrifugal type driven by belt Exhaust gas temp 600 °C
    Water pump Capacity 200L/min （1500r/min） Max. permissible restrictions 3 kPa initial
    Operation conditions
    Features 240L/min （1800r/min） Features
    Intake system 6 kPa final (need
    Thermostat Wax–pellet type charge filter element)
    Opening temp. 82°C Exhaust system 6 kPa max
    Full open temp. 95°C Max. permissible altitude 2000 m
    Cooling fan Blower type, plastic
    762 mm diameter, 10blades
    Dimension
    Options
    Power consumption 5kw
    Cooling air flow 6.2m³/s

    Electrical System

    Charging generator 24V×55A


    Voltage regulator Built-in type IC regulator
    Star ting motor 24V×4.5kW
    Star ting motor 24V
    Battery Capacity 120 AH

    Features

    Publication No. GYH0618N, ISSUE 1 @ AGG UK

    AGG UK | AGG China | AGG USA | AGG UAE Distributed by

    [email protected] | www.aggpower.co.uk

    Follow us @facebook.com/aggpowergroup

    Follow us @linkedin.com/company/agg-power

    Follow us @ AGGPOWER

    All information in the document is substantially correct a the time of printing


    but may be subsequently altered by the company.

    You might also like