Scribd
Upload
151 views2 pages

Engine Spec-AS6500-H5705

This document summarizes the specifications of an AS6500 diesel engine. It produces 140 kW at 1500 rpm and 150 kW at 1800 rpm. Key details include: it has 4 cylinders in a inline configuration with a displacement of 6.5 L. It uses a direct injection fuel system with a longkou in-line injection pump. The engine cooling system uses a fresh water forced circulation method. Electrical features include a 28V×55A charging generator and 24V starting motor.

Uploaded by

Brad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
151 views2 pages

Engine Spec-AS6500-H5705

This document summarizes the specifications of an AS6500 diesel engine. It produces 140 kW at 1500 rpm and 150 kW at 1800 rpm. Key details include: it has 4 cylinders in a inline configuration with a displacement of 6.5 L. It uses a direct injection fuel system with a longkou in-line injection pump. The engine cooling system uses a fresh water forced circulation method. Electrical features include a 28V×55A charging generator and 24V starting motor.

Uploaded by

Brad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Model: AS6500 Engine code:H5705

140 kW@1500 rpm | 150 kW@1800 rpm

Engine Speed Type of Engine Power Generator Power Mechanism


r/min Operation kW kVA
Type Over head valve
1500 Prime Power 140 150
Number of valve Intake 2, exhaust 2 per cylinder
1500 Standby Power 155 165 Valve lashes at cold Intake 0.25mm
1800 Prime Power 150 160 Exhaust 0.50mm

1800 Standby Power 165 176

· The engine performance is as per GB/T2820 Valve Timing


· Ratings are based on GB/T1147.1. Opening Close
Intake valve 20.9°BTDC 44.9°ABDC
· Prime Power:
-There is no time limit in the case of variable load operation. Exhaust valve 51.7°BBDC 11.7°ATDC
In any 250hours of continuous operation period,
the variable load of average work load less than
70%of the prime power.
The operation time in the situation of 100%prime power Fuel Consumption
no more than 500 hours. Permit 10%overload running
1hours in any 12 hours of continuous operation period. Power L/h（1500r/min） L/h（1800r/min）
The overload 10% power running time of every year no 11.3
25% 9.9
more than 25 hours.
50% 17.6 19.6
· Standby Power: 75% 25.2 27.9
-The annual total standby power load should be less than80%
and the average running time shall be less than 200 hours. 100% 33.1 36.3
Among them the standby power point should be no more 110% 36.8 40.4
than 25 hours a year.

Specifications
Fuel System
Engine Model AS6500
Injection pump Longkou in-line “P” type
In-line,4 strokes,
Governor RSV
4 valves,
Feed pump Mechanical type
Engine Type water-cooled ,
Injection nozzle Multi hole type
Turbo charged
Opening pressure 250 kg/cm2
with aftercooler
Fuel filter Full flow, car tridge type
Combustion type Direct injection
Used fuel Diesel fuel oil
Cylinder Type Dry liner

Number of cylinders 4

Bore × stroke 105× 124mm Lubrication System

Displacement 6.5 L Lub. Method Fully forced pressure feed type

Compression ratio 16 : 1 Oil pump Gear type driven by crankshaft

Firing order 1-5-3-6-2-4 Oil filter Full flow, car tridge type

Injection timing 10.5°BTDC Oil pan capacity High level 17.5 liters

Dry weight Approx. 600kg Low level 15 liters

Dimension (L×W×H) 1330×789×1079 mm Angularity limit Front down 25 deg

Rotation SAE NO.3 Front up 35 deg

Fly wheel housing SAE NO.11.5 Side to side 35 deg

(tooth number of gear:127) Lub. Oil Refer to Operation Manual

www.aggpower.co.uk
Cooling System Engineering Data

Cooling method Fresh water forced circulation Heat rejection to coolant 14.1kcal/sec（1500r/min）
Water capacity 6.8 liters 15.1kcal/sec（1800r/min）
(engine only) Heat rejection to intercooler 8.8kcal/sec（1500r/min）
Lid Min. pressure 70kPa 9.4kcal/sec（1800r/min）
Water pump Centrifugal type driven by belt Air flow 10.5m3/min （1500r/min）
Water pump Capacity 129L/min （1500r/min） 13.5m3/min（1800r/min）
Operation conditions
Features 155L/min （1800r/min） Features
Exhaust gas flow 24.8m3/min（1500r/min）
The maximum temp. 31.7m3/min（1800r/min）
of coolant in prime/ 104/100 Exhaust gas temp 600 °C
Standby power Max. permissible restrictions 3 kPa initial
Wax–pellet type Intake system 6 kPa final (need
Thermostat Opening temp. 82°C charge filter element)
Full open temp. 95°C Options
Exhaust system 6 kPa max
Cooling fan Blower type, plastic Max. permissible altitude 2000 m
600 mm diameter, 10 blades Intercooler permissible restrictions 8 kPa
Power consumption 5kw

Cooling air flow 4.0 m³/s

Dimension

Electrical System

Charging generator 28V×55A


Voltage regulator Built-in type IC regulator
Star ting motor 24V×6kW
Star ting motor 24V
Battery Capacity 150 AH

Features Publication No. GYH0618N, ISSUE 1 @ AGG UK

AGG UK | AGG China | AGG USA | AGG UAE Distributed by

[email protected] | www.aggpower.co.uk

Follow us @facebook.com/aggpowergroup

Follow us @linkedin.com/company/agg-power

Follow us @ AGGPOWER

All information in the document is substantially correct a the time of printing


but may be subsequently altered by the company.

You might also like