Scribd
Upload
6 views

Design

Uploaded by

Bhumika Rai
Copyright
© © All Rights Reserved
Available Formats
Download as PDF or read online on Scribd
6 views

Design

Uploaded by

Bhumika Rai
Copyright
© © All Rights Reserved
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 7
ANALYSIS OF DATA © carriage ways 5.5m © clean span of culvert = 4m © grade of concrete used M25 © Area of steel Fe 415 Step 1: calculate the depth of stab ‘Assume 90 mm thickness per meter length Therefore, D = 90x 4 = 360 mm Taking 12 mm dia. Bar, Effective depth = D - CC: dia. Of bars /2 = 360-40~12/2 314mm \i, Bearing width ( bw) calculation ‘According tol IRC- 6 2016) : 300 mm for span less than 3m 400 mm for span greater than 3m therefore, Bearing width by = 400 mm Effective length span ,As per (IRC-21 CI no. 305.4) Ielear span + day = 4.0 +0.314 = 4.314 m li) clear span + by = 4.0+4.0©4.4m therefore, Lar= 4.314m 3) CALCULATION OF LOADS : 1) Dead load (OL) = Ox comp, strength = 0.3625 = 9 KN/m Therefore, for 1. m=9KN/m Bending moment due to dead load, BMa = WU/8 =9X4.3147/8 =20.8 KNm Shear force due to dead load, S.Fac = Wha /2 9x4.314/2 =19.35 KN li) live load -{ Class A wheeled loading) taking highest axial load , load = 11.4 tones = 114 KN TT b = 250 mm (parallel) w=500 mm (perpendicular) width of dispersion parallel to slab, s tire contact area + 2(D + wearing coat ) 0.25 + (036+0)=0.79m For class A loading.If , c/c axial load /2

You might also like