Scribd
Upload
204 views1 page

Batch Test Certificate: Notes: 2. Form No: F/QC/008/1 3 Rev: 05/2022

This certificate summarizes test results for batch 22G27 of product SKL-SP1 manufactured in July 2022. It certifies that the batch meets specifications for nondestructive examination according to several ASME and ASTM standards. Specific test results are provided for sulfur, chlorine, fluorine and cleaner residue. Penetrant test results like flash point and viscosity are also listed. The certificate further states that the material does not contain mercury.

Uploaded by

gaurav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
204 views1 page

Batch Test Certificate: Notes: 2. Form No: F/QC/008/1 3 Rev: 05/2022

This certificate summarizes test results for batch 22G27 of product SKL-SP1 manufactured in July 2022. It certifies that the batch meets specifications for nondestructive examination according to several ASME and ASTM standards. Specific test results are provided for sulfur, chlorine, fluorine and cleaner residue. Penetrant test results like flash point and viscosity are also listed. The certificate further states that the material does not contain mercury.

Uploaded by

gaurav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BATCH TEST CERTIFICATE

Date : 22/07/2022

Product : SKL – SP1

Batch No : 22G27

Mfd. in : JULY 2022

We hereby certify that when tested at time of manufacture, the above material:

1. Meets the requirements of the following specifications:

A. ASME Boiler and Pressure Vessel Code, 2004, 2007, 2010, 2013, 2015, 2017,2019 and 2021 Edition,
Section V, Nondestructive Examination, including 2005, 2006, 2008, 2009b, and 2011a Addenda, Article
6 Paragraph T-641 and Article 24 as applicable.

B. ASME Boiler and Pressure Vessel Code, 1995, 1998 and 2001 Edition, Section V Nondestructive
Examination, including 1999, 2000, 2002 and 2003 Addenda, Article 6 Paragraph T-640 and
Article 24 as applicable.

C. ASME Boiler and Pressure Vessel Code, 1986, 1989 and 1992 Edition, Section V , Nondestructive
Examination, Article 6 including 1992 Addenda, Paragraph T-625, 1993 Addenda Paragraph T-640
and Article 24 as applicable.

D. ASTM E-165-92, ASTME-165-94, ASTM E-165-95, ASTM E-165-02,ASTM E-165-09, ASTM E-165/E-
165M-12, ASTM-165/E-165M-18, Paragraph 7.1,

E. ASTM E 1417, Paragraph 5.1.

2. Meets the requirements of NUCLEAR POWER CORPORATION OF INDIA for materials for Dye penetrant
Inspection process.

The following test results were obtained:

1. Sulphur : <25 ppm


2. Total Chlorine + Fluorine : <25 ppm
3. Cleaner residue (see note 2) : NA g/100g

Penetrant Tests:

Flash Point (PMCC) : >93 ºC


Viscosity, ( cs. Nominal) : 3.14 cST @100º F
Water Tolerance NA
Removability, : PASS .

3. We further certify that this material does not contain mercury as a basic element and no mercury bearing
equipment was used in its manufacture.

Quality Assurance
Notes:
1. Batch numbers are printed on the base of aerosol cans and bulk containers
2. The above certification gives the results obtained at the time of manufacture. Age and use may alter the properties of any material

Form No: F/QC/008/13 Rev: 05/2022

You might also like