Product Introduction

WORK FORCETM
WFU1600 Triplex Pump
Specifications
Nominal input horsepower: 1600
Maximum continuous pinion torque: 12,132 lb.-ft.
Maximum continuous pinion RPM: 670
Maximum strokes per minute: 130
Stroke length: 11 inches
Maximum piston diameter: 9 inches
Minimum piston diameter: 4.5 inches
Suction manifold: 10 inches with 150 pound flanges
Discharge manifold: 5 inches with 7500 psi flanges
Pump weight dry: 31000 pounds

Standard Features
• Mirrored gear assembly.
• Multiple pinion positions.
• Small footprint with high horsepower to weight ratio.
• Alloy steel fluid end with API standard valves and seats.
• 20,000 hour minimum bearing L10 life.
• Gears designed to AGMA 8 and 10 specs.
• Rigid fabricated pump frame and skid.
• Fabricated high strength alloy steel eccentric core.
• High strength alloy steel in all drive components.
• Cast cross heads and guides.
• External lubrication pump.
• External liner wash pump.
• Valve over valve alloy steel fluid end.

Options
• Pulsation dampener.
• Strainer cross.
• Pressure relief valve.
• Torque tube drive interface.
• Pressure gauge.
• Charge pump.
TSC Offshore
• Custom skids.
333 Cypress Run, Suite 375
• Motor starters in explosion proof enclosure. Houston, TX 77094
• Mechanically driven external lube pumps. Phone: 281.945.4400
Facsimile: 281.945.4405
04/20/09 E-Mail: [email protected]
 Product Introduction

WORK FORCETM
WFU1600 Triplex Pump

2'-73
8 " [.795M]
Pinion

5'-25
8 " [1.591M]
Crank & Pump

Dimensions are approximate & subject to change

Crank
1" [1.106M]
3'-72

5" - 5000 PSI Discharge

10" Suction
1" [2.213M]
7'-38
11" [.279M] 3 ' - 9 " [1 .1 4 3 M ] 5 ' - 2 " [ 1 . 5 7 5M ]
1.750 [44.45]
1" [1.106M]
3'-72
R.090 [R2.29]
(2X) 1" [Ø.292M]
Ø112
Ø7.125
7.124 [Ø180.98
180.95 ] Bolt XCircle
[
6.593 167.46
6.563 166.70 ] Ø158 " [Ø.042M]

5'-5" [1.650M]
WORK FORCE

1" [1.298M]
4'-38 3'-113
8 " [1.204M]

1" [.410M]
1'-48

1" [.921M] 2'-93

5'-43 103
8 " [.264M]
3'-04 8 " [.848M]
8 " [1.635M]
5'-63 " [1.696M]
12'-05
8 " [3.674M] 1 4
1" [4.076M] 6'-02" [1.841M]
13'-42

Pinion RPM 70 170 270 370 470 570 670

WFU1600 Performance
Pinion lb-ft 12132
Characteristics
Pinion HP 162 393 624 855 1086 1317 1548
Piston Dia. Pressure Strokes / min 14 33 52 71 91 110 129
4.5 7500 24 59 94 128 163 197 232
5 6571 31 75 118 162 206 250 294
5.5 5431 38 92 146 200 254 308 363
6 4563 46 111 177 242 308 373 439
6.5 3888 55 132 210 288 366 444 522
GPM
7 3353 64 155 247 338 430 521 613
7.5 2921 74 180 286 392 499 605 711
8 2567 97 236 374 513 651 790 928
8.5 2274 109 266 422 579 735 892 1048
9 2028 123 298 473 649 824 999 1175

Notes:
• All data is subject to change without notice.
• All data is based on 100% or continuous duty cycle.
• Data is based on 90% mechanical and 100% volumetric efficiency.
• Minimum RPM or SPM: TSC Offshore
• Electric Systems: 10% of the maximum.
• Mechanical Systems: 50% of the maximum. 333 Cypress Run, Suite 375
Houston, TX 77094
• Achieved pressures are based on the components used.
Phone: 281.945.4400
Facsimile: 281.945.4405
04/20/09 E-Mail: [email protected]