SL74HCT32
Quad 2-Input OR Gate
High-Performance Silicon-Gate CMOS
The SL74HCT32 may be used as a level converter for interfacing
TTL or NMOS outputs to High-Speed CMOS inputs.
The SL74HCT32 is identical in pinout to the LS/ALS32.
• TTL/NMOS-Compatible Input Levels.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA
ORDERING INFORMATION
SL74HCT32N Plastic
SL74HCT32D SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
FUNCTION TABLE
Inputs Output
A B Y
PIN 14 =VCC L L L
PIN 7 = GND
L H H
H L H
H H H
System Logic
SLS Semiconductor
SL74HCT32
MAXIMUM RATINGS *
Symbol Parameter Value Unit
VCC DC Supply Voltage (Referenced to GND) -0.5 to +7.0 V
VIN DC Input Voltage (Referenced to GND) -1.5 to VCC +1.5 V
VOUT DC Output Voltage (Referenced to GND) -0.5 to VCC +0.5 V
IIN DC Input Current, per Pin ±20 mA
IOUT DC Output Current, per Pin ±25 mA
ICC DC Supply Current, VCC and GND Pins ±50 mA
PD Power Dissipation in Still Air, Plastic DIP+ 750 mW
SOIC Package+ 500
Tstg Storage Temperature -65 to +150 °C
TL Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
(Plastic DIP or SOIC Package)
*
Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
VCC DC Supply Voltage (Referenced to GND) 4.5 5.5 V
VIN, VOUT DC Input Voltage, Output Voltage (Referenced to GND) 0 VCC V
TA Operating Temperature, All Package Types -55 +125 °C
tr, t f Input Rise and Fall Time (Figure 1) 0 500 ns
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range
GND≤(VIN or VOUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused outputs must be left open.
System Logic
SLS Semiconductor
SL74HCT32
DC ELECTRICAL CHARACTERISTICS(Voltages Referenced to GND)
VCC Guaranteed Limit
Symbol Parameter Test Conditions V 25 °C ≤85 ≤125 Unit
to °C °C
-55°C
VIH Minimum High-Level VOUT= VCC-0.1 V 4.5 2.0 2.0 2.0 V
Input Voltage IOUT≤ 20 µA 5.5 2.0 2.0 2.0
VIL Maximum Low -Level VOUT=0.1 V or VCC-0.1 V 4.5 0.8 0.8 0.8 V
Input Voltage IOUT ≤ 20 µA 5.5 0.8 0.8 0.8
VOH Minimum High-Level VIN=VIH or VIL 4.5 4.4 4.4 4.4 V
Output Voltage IOUT ≤ 20 µA 5.5 5.4 5.4 5.4
VIN=VIH or VIL
IOUT ≤ 4.0 mA 4.5 3.98 3.84 3.7
IOUT ≤ 5.2 mA
VOL Maximum Low-Level VIN= VIL 4.5 0.1 0.1 0.1 V
Output Voltage IOUT ≤ 20 µA 5.5 0.1 0.1 0.1
VIN= VIL
IOUT ≤ 4.0 mA 4.5 0.26 0.33 0.4
IOUT ≤ 5.2 mA
IIN Maximum Input VIN=VCC or GND 5.5 ±0.1 ±1.0 ±1.0 µA
Leakage Current
ICC Maximum Quiescent VIN=VCC or GND 5.5 1.0 10 40 µA
Supply Current IOUT=0µA
(per Package)
∆ICC Additional Quiescent VIN=2.4 V, Any One Input ≥-55° C 25°C to mA
Supply Current 125 °C
VIN=VCC or GND, 5.5 2.9 2.4
Other Input
IOUT= 0 µA
System Logic
SLS Semiconductor
SL74HCT32
AC ELECTRICAL CHARACTERISTICS (VCC=5.0 V ± 10%, CL=50pF,Input t r=t f=6.0 ns)
Guaranteed Limits
Symbol Parameter 25 °C to ≤85°C ≤125°C Unit
-55°C
tPLH, t PHL Maximum Propagation Delay, Input A or B 20 25 30 ns
to Output Y (Figures 1 and 2)
tTLH, t THL Maximum Output Transition Time, Any 15 19 22 ns
Output (Figures 1 and 2)
CIN Maximum Input Capacitance 10 10 10 pF
Power Dissipation Capacitance (Per Gate) Typical @25°C,VCC=5.0 V
CPD Used to determine the no-load dynamic 15 pF
power consumption:
PD=CPDVCC2f+ICCVCC
Figure 1 Switching Waveforms. Figure 2. Test Circuit
EXPANDED LOGIC DIAGRAM
(1/4 of the Device)
System Logic
SLS Semiconductor
