Scribd
Upload
80 views4 pages

CHM 1025L Data Tables and Plotting Lab Data Lab

This document provides instructions for making data tables and plotting lab data. It describes the required elements of titles, column headers, units and page layout for data tables. It also outlines the key components for graphs, including titles, labeled axes with units, and determining the best-fit line using slope and y-intercept. Examples are given for a sample best-fit line and the equation for determining slope and y-intercept.

Uploaded by

Sophia Galdamez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views4 pages

CHM 1025L Data Tables and Plotting Lab Data Lab

This document provides instructions for making data tables and plotting lab data. It describes the required elements of titles, column headers, units and page layout for data tables. It also outlines the key components for graphs, including titles, labeled axes with units, and determining the best-fit line using slope and y-intercept. Examples are given for a sample best-fit line and the equation for determining slope and y-intercept.

Uploaded by

Sophia Galdamez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CHM 1025L Making Data Tables and Plotting Data

Objectives:

Learn how to make a data table.

Learn how to plot lab data, including titles, labels, and best-fit straight line on paper as well as using a
spreadsheet like Excel.

Data Tables:

When making data tables, the following are required:

Title: A few words to briefly describe the type of information in the table. If more than 1 table is
present, number the tables. For example,

Table 1. Data for Lab 4: Determining the formula for a compound.

Table 2. Summary %Cu and %Cl in copper chloride compounds.

The 1st row of the table should be a header row and contain titles for each column. If there are units
associated with the values, include those in parentheses. When possible, try to not to have tables spread
over 1 page. For large tables this may not be avoidable, in which case make sure to include the header
row at the top of the table on each page.

Plotting Data (also known as Graphing Data):

When graphing scientific data, there are several things that must be included in addition to plotting the
data points, such as a title and axes labels including any applicable units. In this lab we will cover the
basics of what is required for graphs you will be making in this and subsequent chemistry labs.

When plotting data points, typically the 1st column is the value for the x-axis (horizontal axis) and the 2nd
column is the value for the y-axis (vertical axis). Some lab data may require they be switched so that the
slope of the best-fit data line gives a desired result. For example, plotting mass on a y-axis and volume on
an x-axis would result in a slope that gives the density of the substance.

Every graph or plot should have a title that clearly states what type of data is being shown. In axes
should also be labeled with what is being measured as well as the units used to measure. For example, an
axes may be labeled volume (in mL) or as volume, mL. Both ways are acceptable and are often used.

After data points are plotted, it’s often necessary to find the best-fit straight line. This should be a
straight line that is drawn as close to the points as possible and usually doesn’t not include all of the data
points. Figure 1 shows an example of a best-fit straight line.
Figure 1. Sample best-fit straight line.

Sample Data Plot


120
100

Volume (mL)
80
60
40
20
0
0 50 100 150
Pressure (mm Hg)

Equation for a best-fit line: A line has the equation:

y=mx+b

where:

y = vertical axis value (also known as the ordinate)

x = horizontal axis value (also known as the abscissa).

m = slope, which may be found using x and y values from 2 places on the best-fit straight line.
Ideally these 2 places on the line should not be close together. Slope = (y2-y1)/(x2-x1). The
units of the slope depend on the units of the y- and x-axes.

b = y-intercept (the value of y where x=0).


Name: ___________________________

Procedure: For each of the following sections, follow the directions to graph the data. The graphs and
answered questions will count as your lab report for this lab report. Each student must turn in their
own graphs and answers to the questions. You must do the graph for #1 by hand using graph paper, a
ruler, and calculator. For #2 and #3 you may either do them by hand or using a spreadsheet like Excel,
but you must print out your spreadsheets as well as your graphs and hand them in start of the next lab
period.

1. Given the following data from a gas experiment measuring changes in volume in response to
increasing the temperature:

Data for #1.


Temperature (oC) Volume (L)
20.0 1.61
40.0 3.30
55.0 5.44
70.0 5.75
85.0 6.99
100.0 8.25
150.0 12.29
a. Plot the points on a graph.
b. Draw a best-fit straight line.
c. Calculate the slope.
d. Calculate the y-intercept.
e. At what temperature would the volume = 1.50L?
f. At what volume would the temperature = 125.0 oC?
g. What is the equation for the line?

2. Given the following data, graph mass vs. volume so the slope will give the density of the
substance.

Data for #2.


Volume (mL) Mass (g)
0.50 4.00
1.00 7.82
1.40 10.98
2.00 11.6
2.80 22.0
3.81 30.1
a. What would the volume be at 25.0g?
b. Draw the best-fit straight line and write the equation for the line on the graph.
c. What is the slope of the graph?
d. Using the table at the end of this lab to identify the metal.
3. Given the following non-linear data, plot pressure along the y-axis and 1/volume along the x-axis.

Data for #3.


Volume (mL) Pressure (torr)
42.6 400
34.1 500
28.3 600
24.4 700
21.2 800
19.0 900
17.1 1000
15.4 1100
14.2 1200
a. Draw the best-fit straight line.
b. Write the equation for best-fit straight line.
c. What is the slope of the line?

Table of metallic densities for #2.

Density
Element
g/mL
Aluminum 2.70
Antimony 6.68
Barium 3.62
Brass 8.55
Bronze 8.20
Chromium 7.15
Copper 8.96
Gold 19.3
Iron 7.87
Lead 11.3
Magnesium 1.74
Nickel 8.90
Platinum 21.5
Rhodium 12.4
Silver 10.5
Tin 7.26
Titanium 4.51
Tungsten 19.3
Zinc 7.14
Zirconium 6.52

You might also like