Scribd
Upload
60 views1 page

Template Autocad Drawing

1. The document discusses the mechanical design of an adsorber unit (A-401) for producing gluconic acid from Aspergillus niger. 2. Key design specifications of the adsorber include using carbon steel SA-285 Grade C material, operating at temperatures of 20-50°C and a pressure of 100 kPa. 3. Dimensions of the cylindrical adsorber include an inside diameter of 1200mm, total height of 4154.7mm, and ellipsoidal bottom head height of 310.5mm, with 6mm wall thickness and 2mm corrosion allowance.

Uploaded by

AHMAD SYAUQI AIMAN BIN ABU BAKAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views1 page

Template Autocad Drawing

1. The document discusses the mechanical design of an adsorber unit (A-401) for producing gluconic acid from Aspergillus niger. 2. Key design specifications of the adsorber include using carbon steel SA-285 Grade C material, operating at temperatures of 20-50°C and a pressure of 100 kPa. 3. Dimensions of the cylindrical adsorber include an inside diameter of 1200mm, total height of 4154.7mm, and ellipsoidal bottom head height of 310.5mm, with 6mm wall thickness and 2mm corrosion allowance.

Uploaded by

AHMAD SYAUQI AIMAN BIN ABU BAKAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LECTURER’S NAME : GROUP MEMBERS :

PROF. MADYA TS. EN. NOORHISHAM TAN KOFLI ALIA NURAISYAH BINTI ABDUL RAHMAN (A182992)
PROJECT TITLE: PROF. MADYA IR. DR. HASSIMI ABU HASAN MUHAMMAD AZEEM BIN AZMAN (A181902)
PROF. MADYA TS. DR. ROSIAH ROHANI NAVEENDRANA/L CHANDRASEGARAN (A183936)
PRODUCTION OF GLUCONIC ACID PROF. MADYA TS. EN. NOORHISHAM TAN KOFLI NOR NAZUMI BINTI ABDUL AZIZ (A182785)
TS. DR. MUHAMMAD ZULHAZIMAN MAT SALLEH YAVINAH A/L MURALEE THARAN (A181978)
Department of Chemical & Process Engineering
FROM ASPERGILLUS NIGER PROF. MADYA IR. DR. SHUHAIDA HARUN
PROF. MADYA IR. DR. TEOW YEIT HAAN
Faculty of Engineering & Built Environment PROF. MADYA DR. NORLIZA ABD. RAHMAN
Universiti Kebangsaan Malaysia DR. JARINAH MOHD ALI DATE : 23 JUNE 2023
P-168

DRAWING TITLE:

MECHANICAL DESIGN OF
ADSORBER, A-401

PREPARED BY:

K16

DRAWN BY:
ALIA NURAISYAH BINTI ABDUL
RAHMAN (A182992)

SCALE:

NOT TO SCALE

DRAWING UNIT:

MILIMETER

Design
Information
Specification
Material Carbon Steel (SA-
285 Grade C)
Temperature 20 – 50 oC

Pressure 100 kPa

Top Head Hemispherical

Shell Cylindrical

Bottom Head Ellipsoidal

Design
Value
Measurement

Inside Diameter 1200 mm

Height 4154.7 mm

Ellipsoidal Height 310.5 mm

Thickness 6 mm

Corrosion 2 mm
Allowance

You might also like