Scribd
Upload
45 views1 page

Teco 4

The document provides specifications for a TECO IE3 flameproof (EXD) TEFC motor with a 0.75kW rating at 415V 3-phase 50Hz. The motor has an 80 frame size, 1440rpm full load speed, 1.7A full load current, and various torque and efficiency ratings.

Uploaded by

joel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views1 page

Teco 4

The document provides specifications for a TECO IE3 flameproof (EXD) TEFC motor with a 0.75kW rating at 415V 3-phase 50Hz. The motor has an 80 frame size, 1440rpm full load speed, 1.7A full load current, and various torque and efficiency ratings.

Uploaded by

joel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DATASHEET

TECO IE3 FLAMEPROOF (EXD) TEFC

MOTOR SERIES TECO IE3 FLAMEPROOF (EXD) TEFC


START METHOD DIRECT ON LINE
KW RATING 0.75
VOLTAGE (V) 415
PHASES 3
FREQUENCY (Hz) 50
NO OF POLES 4
FRAME 80
SPEED
SYNCHRONOUS (rpm) 1500
FULL LOAD (rpm) 1440
CURRENT
FULL LOAD (Amps) 1.7
LOCKED ROTOR % 882
TORQUE
FULL LOAD TORQUE (Nm) 5
STARTING TORQUE % 295
MINIMUM TORQUE % 260
BREAKDOWN TORQUE % 375
ROTOR INERTIA (J = GD²/4) (Kgm²) 0.0033
EFFICIENCY
100% LOAD % 82.5
75% LOAD % 82
50% LOAD % 79
POWER FACTOR
100% LOAD % 74.5
75% LOAD % 65
50% LOAD % 50.5
INSULATION CLASS F
ENCLOSURE TYPE TEFC
IP RATING 55
WEIGHT OF MOTOR kgs 31
BEARINGS
DRIVE END 6204 ZZ C3
NON DRIVE END 6204 ZZ C3
NO LOAD SOUND PRESSURE LEVEL @ 1M dbA 47
BS4999, IEC60034, IEC60079-1:2014,
DESIGN STANDARD IEC60079-0:2011
Ex db, IIB, T4, Gb and Ex db, I, Mb both
CERTIFICATION -20°C < Tamb < 55°C
TEMPERATURE RISE ABOVE AMBIENT < 80 DEG C

Copyright ©2020 - TECO AUSTRALIA AND NEW ZEALAND

You might also like