READ THIS ARTICLE ONLINE

Handling and Storing Chemicals

Tips for safely moving, storing, and protecting yourself from laboratory
chemicals
Jul 10, 2017 Vince McLeod, CIH

Let’s face it: most laboratories use chemicals. Depending on the lab’s focus—research
synthesis, compound production, basic acid digestions, etc.—the types and amounts of
chemicals used can vary greatly. Unfortunately, reports of accidents and incidents
involving the use and storage of chemicals are far too frequent. We must remain diligent
in properly handling and storing these hazardous materials, or problems will arise. So, in
this column we provide general safety rules of thumb for handling and storing chemicals
in the laboratory.

Before we get into the details, it is important to take stock of the many federal, state, and
local regulations that may include specific requirements for handling and storing
chemicals in labs and stockrooms. For example, controlled substances and consumable
alcohols are regulated by the Food and Drug Administration and the Drug Enforcement
Agency, radioactive substances are regulated by the Nuclear Regulatory Commission, and
hazardous wastes are governed by the Environmental Protection Agency. These specific
requirements can range from simple locked storage cabinets and specific waste
containers to controlled access for regulated areas. If any of your labs are using or
generating potentially hazardous substances, determine which regulations apply and the
specific requirements they impose. State or local building and fire codes are very
common, and applicability is becoming more demanding each year.

Another hurdle frequently encountered is the fact that labs evolve and change over time.
We need to focus awareness on our lab facilities and implement a regular (annual) review
process to ensure our overall laboratory safety stays up to date.

First—The right personal protective equipment (PPE)

The focus of this article is safe storage of chemicals. But before we start rounding up
bottles of chemicals and reorganizing our labs, we need to make sure we have the proper
PPE. At a minimum, this should include appropriate chemical-resistant gloves and eye
protection, closed-toe shoes (essential for working in the laboratory), and lab coats
and/or chemical aprons (used when needed or when required by your laboratory safety
policy).

Once we have collected our PPE, there are just a couple more things to gather before we
begin moving those chemical containers around. Survey your surroundings, and take
notice of any potential trip hazards and locations of work stations where others are busy.
Make sure exits, passageways, and emergency equipment areas (i.e., eyewash and safety
showers) are clear and free of stored materials. Locate and have close at hand a full spill
kit with appropriate absorbent materials, neutralizing agents, cleanup utensils, and
waste containers. Finally, check that all chemical containers have complete labels in good
condition and that safety data sheets (SDS) are readily available. Consult OSHA’s Hazard
Communication Standard 1 for guidance. Another good resource for this is the Standard
System for the Identification of the Hazards of Materials for Emergency Response.2

Next—Safe transport
Here are our pointers for moving chemicals safely:

▸ Never move visibly degrading chemicals and containers. Report these to your lab
supervisor or principle investigator.

▸ Whenever transporting chemicals, place bottles in appropriate, leak-proof

secondary containers to protect against breakage and spillage. A good example is
using a special plastic tote for carrying four-liter glass bottles of corrosives or
solvents.

▸ When moving multiple, large, or heavy containers, use sturdy carts. Ensure cart
wheels are large enough to roll over uneven surfaces without tipping or stopping
suddenly. If carts are used for secondary containment make sure the trays are
liquid-tight and have sufficient lips on all four sides.

▸ Do not transport chemicals during busy times such as break times or (for those
academic laboratories) lunch periods or class changes.

▸ Use freight elevators for moving hazardous chemicals whenever possible to avoid
potential incidents on crowded passenger elevators. Remember to remove gloves
when pushing elevator buttons or opening doors.

▸ Never leave chemicals unattended.

Rules for chemical storage

Safely storing chemicals in a laboratory or stockroom requires diligence and careful
consideration. Correct use of containers and common lab equipment is critical. To store
chemicals safely, DO the following;

▸ Label all chemical containers fully. We recommend including the owner’s or user’s
name along with the date received.

▸ Provide a specific storage space for each chemical, and ensure return after each use.
 ▸ Store volatile toxics and odoriferous chemicals in ventilated cabinets. Please check
with your environmental health and safety personnel for specific guidance.

▸ Store flammable liquids in approved flammable liquid storage cabinets. Small

amounts of flammable liquids may be stored in the open room. Check with your
local authority (e.g., fire marshal, EH&S personnel) for allowable limits.

▸ Separate all chemicals, especially liquids, according to compatible groups. Follow all
precautions regarding storage of incompatible materials. Post a chemical
compatibility chart for reference, both in the lab and next to chemical storage
rooms.

▸ Use appropriate resistant secondary containers for corrosive materials. This

protects the cabinets and will catch any leaks or spills due to breakage.

▸ Seal containers tightly to prevent the escape of vapors.

▸ Use designated refrigerators for storing chemicals. Label these refrigerators

CHEMICAL STORAGE ONLY—NO FOOD. Never store flammable liquids in a
refrigerator unless it is specifically designed and approved for such storage. Use
only explosion-proof (spark-free) refrigerators for storing flammables.

And AVOID doing the following:

▸ Storing large, heavy containers or liquids on high shelves or in high cabinets.

Instead store these at shoulder level or below.

▸ Storing bottles on the floor unless they are in some type of secondary containment. •
Storing chemicals near heat sources or in direct sunlight.

▸ Storing chemicals in fume hoods. Excessive containers interfere with air flow and
hood performance. Only chemicals in actual use should be in the hood.

▸ Storing anything on top of cabinets. Ensure at least 18 inches of clearance around all
 sprinkler heads to avoid interference with the fire suppression system.

▸ Using bench tops for storage. These work spaces should contain only chemicals
currently in use.

▸ Storing chemicals indefinitely. Humidity causes powders to cake or harden. Liquid

chemicals evaporate. We strongly recommend all containers be dated when they
arrive in the lab. Ensure all manufacturers’ expiration dates are strictly followed.
Pay special attention to reactive or dangerous compounds. Dispose of all outdated,
hardened, evaporated, or degraded materials promptly.

Following these simple guidelines will get you well on the way to an efficient, organized,
and safely operating laboratory. Ignore them, or become cavalier in their application, and
you may be picking through ashes or rubble one day. Spend a few minutes going through
the lab with this list on a regular basis, and you should avoid any major incidents with
chemical storage. As always, safety first.

References:
1. OSHA Hazard Communication Standard -
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=100

2. Standard System for the Identification of the Hazards of Materials for Emergency
Response, National Fire Protection Association, Publication 704.
http://www.nfpa.org/aboutthecodes/AboutTheCodes.asp?DocNum=704 

Additional resources
▸ NIOSH Pocket Guide to Chemical Hazards. National Institute of Occupational Safety
and Health. Publication 2005-149. http://www.cdc.gov/niosh/npg/ 
▸ The Merck Index: An Encyclopedia of Chemicals, Drugs and Biologicals. 14th edition.
Merck & Company, Inc. Rahway, N.J. Latest edition.
▸ Prudent Practices in the Laboratory: Handling and Disposal of Chemicals. National
Research Council. National Academy Press. Washington, DC. Latest edition.
▸ Webinar: Chemical Hygiene Plans and Storage
▸ Webinar: Managing Lab Chemicals Safely

https://www.labmanager.com
© 1986 – 2023 LAB MANAGER. ALL RIGHTS RESERVED.