0% found this document useful (0 votes)
108 views1 page

Stormwater: (Interlocking Joint) - SANS 677

The document provides specifications for stormwater pipes of various diameters, including nominal diameter, inside diameter, outside diameter, wall thickness, nominal length, inside socket, and approximate mass per pipe. It notes that not all pipe sizes are produced at all factories and to check availability before ordering. The document contains specifications for 50D, 75D, and 100D pipe classes in a table format.

Uploaded by

Ephraim Barez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
108 views1 page

Stormwater: (Interlocking Joint) - SANS 677

The document provides specifications for stormwater pipes of various diameters, including nominal diameter, inside diameter, outside diameter, wall thickness, nominal length, inside socket, and approximate mass per pipe. It notes that not all pipe sizes are produced at all factories and to check availability before ordering. The document contains specifications for 50D, 75D, and 100D pipe classes in a table format.

Uploaded by

Ephraim Barez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Stormwater

(Interlocking Joint) - SANS 677


Notes:
1. The 100mm & 150mm diameter pipes are not made at all Rocla factories. If they are required,
special arrangements can be made to make them to the length and wall thickness required.
2. For pipes of 450mm diameter and less the pipelengths available may differ from those
in the tabulation. Please enquire about this dimension before placing an order.
3. The 1 950 mm ND Pipes are not made at all Rocla factories, please enquire before placing an order.

Nominal Inside Outside Wall Nominal Inside Approximate


Pipe Class Diameter (ND) Diameter (ID) Diameter (OD) Thickness (T) Length (L) Socket (S) Mass per pipe
mm mm mm mm m mm kg/pipe

300 292 362 35 1.83/2.44 16 170/226


375 369 445 38 1.83/2.44 16 229/306
450 445 533 44 1.83/2.44 20 319/426
525 534 616 41 2.44 20 466
600 611 699 44 2.44 15 570
675 685 787 51 2.44 17 742
750 762 870 54 2.44 18 871
50D 825 830 946 58 2.44 18 1019
900 903 1029 63 2.44 18 1204
1050 1034 1194 80 2.44 22 1763
1200 1181 1359 89 2.44 22 2235
1350 1328 1524 98 2.44 25 2764
1500 1461 1689 114 2.44 25 3551
1650 1608 1854 123 2.44 25 4211
1800 1755 2019 132 2.44 30 4926
1950 1898 2184 143 2.44 30 5772
300 292 362 35 1.83/2.44 16 170/226
375 369 445 38 1.83/2.44 16 229/306
450 445 533 44 1.83/2.44 20 319/426
525 514 616 51 2.44 20 570
600 585 699 57 2.44 15 724
675 647 787 70 2.44 17 993
750 718 870 76 2.44 18 1193
75D 825 788 946 79 2.44 18 1355
900 853 1029 88 2.44 18 1638
1050 986 1194 104 2.44 22 2242
1200 1151 1359 104 2.44 22 2581
1350 1292 1524 116 2.44 25 3230
1500 1419 1689 135 2.44 25 4149
1650 1566 1854 144 2.44 25 4870
1800 1707 2019 156 2.44 30 5748
1950 1846 2184 169 2.44 30 6735
150 153 197 22 1.83 10 57
225 229 279 25 1.83 10 94
300 292 362 35 1.83/2.44 16 170/226
375 369 445 38 1.83/2.44 16 229/306
450 445 533 44 1.83/2.44 20 319/426
525 514 616 51 2.44 20 570
600 585 699 57 2.44 15 724
675 647 787 70 2.44 17 993
100D 750 718 870 76 2.44 18 1193
825 788 946 79 2.44 18 1355
900 853 1029 88 2.44 18 1638
1050 986 1194 104 2.44 22 2242
1200 1127 1359 116 2.44 22 2852
1350 1262 1524 131 2.44 25 3609
1500 1383 1689 153 2.44 25 4648
1650 1524 1854 165 2.44 25 5512
1800 1665 2019 177 2.44 30 6448
1950 1800 2184 192 2.44 30 7564

Please note: Mass is an approximation only. Rocla cannot guarantee the exact mass as listed on this table.

You might also like