Make Your Own Kite

Make Your Own Kite
March 1, 2011
Rate This Article
Read & Add Comments(1)

Share with friends
Save This
Print This

Head out to play on the next windy day with your own handmade kite. By following our
step-by-step instructions and tips, this easy kid craft activity will take family fun to new
heights
Handmade Kite How-To
Supplies
Downloadable instructions
1 dowel rod- 2 feet long (3/16” diameter)
1 dowel rod- 3 feet long (3/16” diameter)
Pencil
Wood glue
Craft knife
Nylon, plastic, fabric or paper
Tape or glue
Lightweight string or fishing line
Ribbon or repurposed fabric
Kite string (on a spool) or lightweight string and a cardboard roll
Scissors
Instructions
1. Take your 3-foot long dowel rod and measure a foot from the top of the stick, making a mark
with your pencil. Center the 2-foot long stick horizontally on top of the longer stick where you
made the mark, creating a cross shape.
2. Attach the two dowel rods where they intersect with a couple dabs of wood glue. Once the
glue has dried, use your string to weave in and out of the four posts until the two sticks are
sturdy. Secure the end of the string with a dab of glue.
3. Use your craft knife to cut a small notch in the end of each point of your kite’s frame. Starting
at the bottom notch in the cross, wrap a piece of string or fishing line all the way around,
securing it in each of the four notches. Upon reaching the bottom of the cross, tie the string or
fishing line into a knot.
4. Once you’ve built the frame of your kite, lay it atop one of the following materials:
 Ripstop nylon: This lightweight material has a checkered weave that’s designed to
prevent ripping. Purchase ripstop nylon at a fabric store or online, and the frame of your
kite won’t require a combination of materials. While ripstop nylon is great for kites, any
lightweight, wind-proof nylon is ideal.
 Plastic: Plastic bags or sheeting (found at hardware stores) can easily be used to cover
your kite. If you’d like to give your kite a decorative appearance with fabric, apply plastic
as a base layer since most fabrics aren’t wind-resistant.
 Paper: Newspaper, rice paper or butcher paper can all be used to cover your kite, but
these materials aren’t always the best for especially strong winds since they can be prone
to ripping.
5. Trace the outline of the frame onto your material, measure 2” from each of the four sides, and
draw a 2” wide border.
6. Cut out your material and make a slit in each of the four corners so the material doesn’t bunch
when you fold the border. Lay the material on top of the frame, and wrap the border around the
outer string or fishing line of the kite. Use glue or tape to adhere your material of choice in place.
7. Make the kite’s bridle—an arrangement of strings attached to the bottom of your kite that
allows it to maneuver. The bridle is also what you’ll tie your kite string to in step 8. To make the
bridle, Cut a 3 1/2’ piece of string, and tie one end around the top of the frame. Make a small
loop one-third of the way down the string and tie it in a knot. Tie the open end of the string to the
bottom of the frame.
8. Tie your kite string or a lightweight string to the loop in the bridle. If using string that doesn’t
come in a roll, wrap it around a cardboard roll.
9. To make the kite’s tail, tie a 6’ long piece of string or fishing line to the bottom of the frame.
Knot several short pieces of ribbon or strips of repurposed material to the string, each about 8”
apart. After completing this step, you’ll be ready to fly!
Flying Your Kite
 The right weather: Check the weather for the wind conditions in your area. A
lightweight kite will require at least 5 mph winds to fly while strong winds over 25 mph
can prove to be more challenging. As a general rule, if you see branches blowing, the
wind should be strong enough to fly your kite.
 Where to fly: Clear, open areas like beaches, parks and fields are best for flying. Steer
clear of areas with power lines and trees.
 How to fly: Start by standing with your back to the wind. Hold your kite up by the bridle
point and let the line out. If there’s enough wind, your kite will go right up. Let the kite
fly away from you a little, then pull in on the line so it will climb. Repeat this step until
your kite gains the altitude necessary to find a good, steady wind. The higher your kite
flies, the stronger the wind.
Tip: If you’re having trouble getting your kite in the air, try letting out a small length of
string and begin to run with your kite until it’s lifted by the wind.
 Dipping: If your kite begins to take a sudden dip, run or pull on the kite string to give
your kite a lift.
 Landing: When you’re ready to wrap up your activity, begin to steadily wind the kite
string around its spool. To prevent any damage to your kite, have a partner catch it as it
nears the ground.
Tip: When you’re done flying your kite, consider hanging it as décor. We love the look of a kite
hanging in a child’s bedroom. Try making a few kites of different sizes, and display them in a
whimsical arrangement.

Make Your Own Kite

Uploaded by

Copyright:

Available Formats

Make Your Own Kite

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Make Your Own Kite

Uploaded by

Copyright:

Available Formats

Make Your Own Kite

Rate This Article

Read & Add Comments(1)

You might also like