Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    6 Arm CFBM

    Uploaded by

    djanet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    6 Arm CFBM

    Uploaded by

    djanet
    40 views1 page

    Original Title

    6 arm CFBM

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views1 page

    6 Arm CFBM

    Uploaded by

    djanet

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Caged Fullbore Flowmeter (6 arm CFBM)

    The spinner blades and cage assembly collapse down


    to pass through tubing restrictions without damage

    Application The Sondex Caged Fullbore flow rates with coverage over
    Flowmeter is run at the bottom a large cross-section of the
    • Detect production loss due to
    of a production logging tool casing. The spinner runs on
    crossflow or thief zones
    string. The spinner blades and precision bearings and its
    • Locate packer and plug leaks cage assembly collapse down rotation is sensed by zero drag
    • Identify lost-circulation zones to tool diameter, enabling Hall-effect detectors, and
    in open holes it to pass through tubing the signal from the sensors
    restrictions without damage. is converted into a flow
    • Locate points of increased
    rate measurement. The low
    production due to well treatment The tool has a six arm, spring-
    mechanical threshold of the
    loaded cage that centres the
    • Injection and production tool enables it to be used in
    spinner in the middle of the
    flow profiling low flow rates; normal output
    flow and supports tool weight
    is 10 pulses per revolution with
    in deviated wells. A large
    Features diameter impeller measures
    directional indication.
    • High deviation and horizontal
    well logging
    • Measurement of low flow rates Specifications
    • Interchangeable mechanical Temperature rating 350°F (177°C)
    sections to match casing sizes Pressure rating 15,000 psi (103.4 MPa)
    from 4 1/2 to 9 5/8 in.
    Tool diameter 1 11/16 in. (43 mm)
    • Combinable with other
    Sondex Ultrawire™ production Tool length 2.91 ft (0.889 m)

    logging tools Tool weight (dependant on


    10 lb (4.5 kg) for 1 11/16 in. tool with 7 in. cage
    spinner and cage sizes)
    • Connects to either a Spinner
    Electronics (CFBE) or a Sensor measure point (from
    13.5 in. (349 mm)
    bottom of the tool)
    Capacitance/Temperature/Flow
    tool (CTF) Output 10 pulses/rev (directional)

    • Modification kit available for 1.7 ft/min (0.01 m/s) (approx),


    Spinner threshold
    100 bpd in 7 in. casing
    connection to 1 3/8 in. CTF
    500 ft/min (2.54 m/s),
    Maximum fluid velocity
    28,250 bpd in 7 in. casing
    • Lockable spinner for high rate
    injection wells (standard feature Casing range 4 1/2 in. to 9 5/8 in.

    for 9 5/8 in. tools) Materials Corrosion resistant throughout


    • Solid impeller shafts for very high
    rate wells. Baskets for casing
    sizes 3 in. to 9 5/8 in.

    bakerhughes.com Copyright 2020 Baker Hughes Company. All rights reserved. 82584

    You might also like