Magnetic Memory
Magnetic Memory
Magnetic memory is the main way how data is being stored on magnetic medium. It is how data is stored on devices like hard drive
which is the device people use to store documents audios and videos in their computers. Because of this way of memorization, hard
drive has a lot of advantage over optical medias like CD and DVD for its longer life span, larger capacity and ability of rewriting.
The idea behind this method of memorization is that by having multiple regions on a platter, the different magnetization on the
region represent different signals which are further translated into data that users can understand.
Figure 1: (left) Inner look of a hard disk drive and (right) platter of a hard disk drive
Writing
From the design of the hard drive, it was known that the data is stored on the surface of the platter which is coated with magnetic
material such as Co-Ni-Fe alloy or Co-Cr-Pt alloy because their high coercivity made them able to hold stay magnetized even after
the magnetic field is removed. The writing process is performed by the metal head, also known as the read/write head. The main
components of a read/write head are head arm, coil and slider. The head arm holds the read/write arm right above the region where
data needs to be written or read without of touching the platter because doing so will damage the surface of the platter and affect
the readability of the data. By holding the head extremely close to the surface of the platter, the magnetic field generated by the coil
can affect the magnetism of the certain region, also known as bit on the platter. By running a current through the copper coil, it will
generate a magnetic field; because of the magnetic properties of the surface coating, the magnetic field will be recorded on the bit
even after the head moves away from that bit. By changing the direction of current, bits will copy the magnetic field direction
generates by the coil and data will be stored.
1 https://eng.libretexts.org/@go/page/334
Reading
After the writing process, regions where data are stored will have bits that have been affected by the coil’s magnetic field and
regions where no data is stored will be magnetic-free. The idea behind the reading process is bits that shows a certain direction of
magnetic polarity will represent 1 and the other direction will represent 0. By placing the coil close to a magnetic field, the
electrons within the conductor, in this case the coil will start to flow, creating an electron current flowing through the coil. Since
different direction of magnetic field will cause electrons to flow in different direction. The two different voltages caused by the
different directions of current will be interpreted by the computer as digital signal and will then be translate into the language that
most people can understand.
Figure 3: (left) An 8-inch HDD from 1979 that can hold 64.5 MB of data and (right) a look of the Intel solid state
drive
Question
1. In what form is data stored on a hard disk drive?
2. What is the main way of storing more data on a platter?
3. Which device might take over HDD’s role in the future?
Answer
1. Data is transferred into digital binary signal and stored on the platter as different magnetic polarity.
2. The main way to store more data on a same amount of area on a platter is to decrease the distance between the head and the
platter surface; the area being scanned will decrease, meaning that the area of each bit can be decrease which eventually lead to
more data stored.
3. Solid state drive might take over HDD because of its faster read and write speed, and because of their similar size, SDD fit in
well in computers too. However, because of the expensive price and low capacity, HDD still remain the best choice for
customers today.
2 https://eng.libretexts.org/@go/page/334
Contributor
Minghao Zhang (UC Davis, December 2015)
Magnetic Memory is shared under a not declared license and was authored, remixed, and/or curated by LibreTexts.
3 https://eng.libretexts.org/@go/page/334