Scribd
Upload
57 views2 pages

Pre-Test 2

This document contains a 4 question practice test on dynamics for a class. Question 1 involves work and energy calculations to determine the speed and distance of a moving collar. Question 2 involves work and energy calculations with friction to determine the velocity and tension in a pulley system. Question 3 involves rigid body kinematics to determine the velocity and acceleration of two loads connected by cords on an accelerating pulley. Question 4 involves rigid body kinematics calculations to determine the velocity, acceleration at different points in a multi-pulley speed reduction system.

Uploaded by

Ryan Lau
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views2 pages

Pre-Test 2

This document contains a 4 question practice test on dynamics for a class. Question 1 involves work and energy calculations to determine the speed and distance of a moving collar. Question 2 involves work and energy calculations with friction to determine the velocity and tension in a pulley system. Question 3 involves rigid body kinematics to determine the velocity and acceleration of two loads connected by cords on an accelerating pulley. Question 4 involves rigid body kinematics calculations to determine the velocity, acceleration at different points in a multi-pulley speed reduction system.

Uploaded by

Ryan Lau
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRE-TEST 2 SEM 2-2022/2023

SMJP1053 - DYNAMICS DR. AHMAD FAIZ MOHAMMAD

PRACTICE TEST 2
Answer all questions. Show all the steps in your working of each problem.

Question 1
(Topic: Work & Energy)

The system shown is at rest when a constant force of 100 N is applied to collar B.
(a) If the force acts through the entire motion, determine the speed of collar B as it strikes the
support at C.
(b) What is the distance 𝑑𝑑 when the 100-N force is removed if the collar is to reach support C with
zero velocity?
(5 marks)

Question 2
(Topic: Work & Energy)

The system shown is at rest when a constant pulling


force P of 300 N is applied to block A. By neglecting
the masses of the pulleys and the effect of friction in
the pulleys, determine (a) the velocity of block B after
block A has moved by 2 m, and (b) the tension in the
cable. Assume that the coefficients of friction between
block A and the horizontal surface are 𝜇𝜇𝑘𝑘 = 0.20 and
𝜇𝜇𝑠𝑠 = 0.25.

(5 marks)

1/2
PRE-TEST 2 SEM 2-2022/2023
SMJP1053 - DYNAMICS DR. AHMAD FAIZ MOHAMMAD

Question 3
(Topic: Rigid Body Kinematics)

A pulley and two loads are connected by inextensible cords as shown. The pulley starts from rest
at 𝑡𝑡 = 0 and is accelerated at the uniform rate of 2.4 rad/s2 clockwise.

At 𝑡𝑡 = 4 s, determine the velocity and acceleration of (a) load A and (b) load B.

(5 marks)

Question 4
(Topic: Rigid Body Kinematics)

Three belts move over two pulleys without slipping in the speed reduction system shown above. At
the instant shown, the velocity of Point A on the input belt is 0.60 m/s to the right, decreasing at
the rate of 1.8 m/s2.

Determine, at this instant, (a) the velocity and acceleration of Point C on the output belt, and (b)
the acceleration of Point B on the output pulley.

(5 marks)

2/2

You might also like