Mos 2

AR-18 – B.
Tech – Civil II year II Sem
Mechanics of Solids-II
Course Code: 18CET208 External Marks: 60
Credits : 03 (2L:1T: 0P) Internal Marks: 40
COURSE OBJECTIVES:
Students will have
• to learn the deflection of simply supported and cantilever beams which are solved by double
integration method, Macaulay’s method and moment area method.
• to study principal stress and strain which include Stresses on an inclined section of a bar under axial
loading compound stresses, Normal and tangential stresses Mohr’s circle of stresses, Analytical and
graphical solutions
• to study the thin cylinders which include thin seamless cylindrical shells, derivation of formula for
longitudinal and circumferential stresses, hoop, longitudinal and volumetric strains, thin spherical
shells
• to study the thick cylinder which include Lame’s theory, derivation of Lame’s formulae, distribution
of hoop and radial stresses across thickness, thick spherical shells
• to study Columns and struts which include types of columns, short, medium and long columns,
axially loaded compression members, crushing load, Euler’s theorem for long columns, derivation of
Euler’s critical load formulae for various end conditions.
• to study direct and bending stress, and determination of stress in dams and retaining walls. And
various checks for stability of retaining walls and dams.
COURSE OUTCOMES:
Students will get ability

• to develop the knowledge about the deflection of different types of beams under different methods.
• to identify principal stress and strain which include Stresses on an inclined section of a bar under
axial loading compound stresses, Normal and tangential stresses Mohr’s circle of stresses, Analytical
and graphical solutions
• to read the knowledge about the thin and thick cylinders under different types and methods.
• to develop the knowledge about the Columns and struts under different types and methods.
• to identify direct and bending stress, and determination of stress in dams and retaining walls. And
various checks for stability of retaining walls and dams.
UNIT I
Deflection of beams
Bending into a circular arc – slope, deflection and radius of curvature – Differential equation for the elastic
line of a beam – Double integration, Moment area method (Mohr’s theorems), Macaulay’s method –
Determination of slope and deflection for cantilever and simply supported beams subjected to point loads
and U.D.L
UNIT II
Thin cylinders:
Thin seamless cylindrical shells – Derivation of formula for longitudinal and circumferential stresses –
hoop, longitudinal and volumetric strains – changes in dia, and volume of thin cylinders – Thin spherical
shells.
ADITYA INSTITUTE OF TECHNOLOGY AND MANAGEMENT, TEKKALI. Page 73 of 209

AR-18 – B.Tech – Civil II year II Sem
Thick cylinders:
Introduction Lame’s theory for thick cylinders – Derivation of Lame’s formulae – distribution of hoop and
radial stresses across thickness – design of thick cylinders – compound cylinders – Necessary difference of
radii for shrinkage – Thick spherical shells.
UNIT III
Principal stresses and strains:
Introduction – Stresses on an inclined section of a bar under axial loading – compound stresses – Normal
and tangential stresses on an inclined plane for biaxial stresses – Two perpendicular normal stresses
accompanied by a state of simple shear – Mohr’s circle of stresses – Principal stresses and strains –
Analytical and graphical solutions.
UNIT IV
Columns :
Introduction – Types of columns –long columns – Euler’s Crippling Load- - assumptions- Derivation of
Euler’s critical load for various end conditions –Equivalent length of a column – slenderness ratio – Euler’s
critical stress – Limitations of Euler’s theory – Rankine – Gordon formula – Secant formula – Empirical
formulae – Straight line formula.
UNIT V
Analysis of Members under Axial Load and Bending Moment:
Stresses in Members subjected to Axial load and Bending Moment- Core of a section –Application to
Gravity Dams and Retaining walls (Middle-Third Rule)-Analysis of Chimneys (masonry).
Text Books:
1. Introduction to text book of Strength of materials by R.K.Bansal – Laxmi publications Pvt. Ltd., New
Delhi.
2. Mechanics of Solid, by Ferdinand Beer and others – Tata Mc.Grawhill Publications,2000.
3. Introduction to text book of Strength of Material by U.C. Jindal, Galgotia publications.
4. Strength of materials by R. Subramanian, Oxford university press, New Delhi
5. Strength of materials Elementary Theory and Problems - Vol. I by Timoshenko
Reference Books:
2. Strength of Materials by Schaum’sout line series – Mc. Graw hill International Editions.November 8,
2013
3. Strength of Materials by S. Ramakrishna and R.Narayan – Dhanpat Rai publications.
4. Strength of materials by R.K.Rajput, S.Chand& Co, New Delhi.
ADITYA INSTITUTE OF TECHNOLOGY AND MANAGEMENT, TEKKALI. Page 74 of 209

Mos 2

Uploaded by

Copyright:

Available Formats

Mos 2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mos 2

Uploaded by

Copyright:

Available Formats

AR-18 – B.

Tech – Civil II year II Sem

Students will get ability

ADITYA INSTITUTE OF TECHNOLOGY AND MANAGEMENT, TEKKALI. Page 73 of 209

ADITYA INSTITUTE OF TECHNOLOGY AND MANAGEMENT, TEKKALI. Page 74 of 209

You might also like