Scribd
Upload
192 views

Lecture 16

Conducting polymers can conduct electricity unlike ordinary polymers. They are classified as intrinsically or extrinsically conducting. Intrinsically conducting polymers have conjugated pi-electrons in their backbone that allow charge transport. They include doped polymers whose conductivity is increased by oxidation or reduction doping. Extrinsically conducting polymers derive conductivity from conductive fillers or blending with other polymers. Conducting polymers have applications in rechargeable batteries, sensors, drug delivery, and electronic devices.

Uploaded by

Hardhik Gamer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
192 views

Lecture 16

Conducting polymers can conduct electricity unlike ordinary polymers. They are classified as intrinsically or extrinsically conducting. Intrinsically conducting polymers have conjugated pi-electrons in their backbone that allow charge transport. They include doped polymers whose conductivity is increased by oxidation or reduction doping. Extrinsically conducting polymers derive conductivity from conductive fillers or blending with other polymers. Conducting polymers have applications in rechargeable batteries, sensors, drug delivery, and electronic devices.

Uploaded by

Hardhik Gamer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

POLYMERS

CONDUCTING POLYMERS : Polymers which can conduct


electricity are called conducting polymers. Ordinary polymers
obtained by usual methods are nearly insulators. However,
some specific polymers may act as conductors.
Classification: Conducting polymers may be classified as
POLYMERS
1. Intrinsically conducting polymers :
These types of polymers have a solid backbone made up of
extensive conjugated system, which is responsible for
conductance. They may be of two types:
(i) Conducting polymers having conjugated π-electrons in the
backbone : These polymers essentially contain a conjugated
π-electron backbone responsible for electrical charge. Under
the influence of electrical field conjugated π -electrons of the
polymer get excited, which can then be transported through
the solid polymer. Fulther, overlapping of orbitals of
conjugated π -electrons over the entire backbone results in
the formation of valence bands as well as conduction bands,
which extend over the complete polymer molecule. The
presence of conjugated π -electrons in polymers increases its
conductivity, e.g.,
POLYMERS

Polypyrrole
POLYMERS
(ii) Doped conducting polymers: The conducting polymers
obtained by exposing the polymer to a charged transfer agent
in either gas phase or in solution are called doped conducting
polymers.
Doping is the process by which conductivity of the polymers
may be increased by creating negative or positive charge on
the polymer backbone by oxidation or reduction.
Doping may be of two types:
(A) p-Doping : It is done by oxidation process. In this process, the
conducting polymer is treated with a Lewis acid.
POLYMERS
(B) n-Doping : It is done by reduction process. In this process,
the conducting polymer is treated with a Lewis base.
(CH)x + B (CH)-x B+
Polyacetylene Lewis base n-Doped polyacetylene
Advantages of intrinsically conducting polymers :
(i) Their conductivity
(ii) Their ability to store a charge.
(iii) Their ability to undergo ion exchange.
(iv) They can absorb visible light to give coloured products.
(v) They are transparent to X-rays.
POLYMERS
Limitations of intrinsically conducting polymers:
(i) Their conductivities are poorer than metals.
(ii) Their improcessability.
(iii) Their poor mechanical strength.
(iv) They are less stable at high temperatures.
(v) On storage they lead to loss in their conductivity.
POLYMERS
2. Extrinsically conducting polymers :
Those conducting polymers which owe their conductivity due to
the presence of externally added ingredients in them are called
extrinsically conducting polymers. They are of two types :
(i) Conductive element filled polymers : In this type, polymer acts
as a binder to hold the conducting elements together in solid
entity.
The minimum concentration of the conductive filler, which is
added to let the polymer start conducting is called the
percolation threshold.
Important characteristics of these polymers are : (a) They possess
good bulk conductivity.
(b) They are cheaper.
(c) They are light in weight.
(d) They are mechanically durable and strong.
(e) They are easily processable in different forms, shapes and sizes.
POLYMERS
(ii) Blended conducting polymers: These types of polymers are
obtained by blending a conventional polymer with a
conducting polymer either physically or chemically. Such
polymers can be easily processed and possess better physical,
chemical and mechanical properties.
3. Coordination or inorganic conducting polymers :
These polymers contain charge transfer complexes and are
obtained by combining metal atoms with polydentate ligands.
POLYMERS
Applications of conducting polymers: Conducting polymers are
widely used :
1. In rechargable batteries.
2. In making analytical sensors for pH, O2, SO2, NH3, glucose,
etc.
3. In the preparation of ion exchangers.
4. In controlled release of drugs.
5. In optical filters.
6. In photo voltaic devices.
7. In telecommunication systems.
8. In micro-electronic devices.
9. In bio-medical applications.

You might also like