Scribd
Upload
1K views1 page

Amendment No. 1 June 2015 TO Is 10500: 2012 Drinking Water - Specification

This document amends the Indian drinking water specification standard IS 10500 from 2012. It changes the maximum limit for fluoride from 0.3 to 1.0 milligrams per liter in Table 2. It also removes the relaxation limit of 0.05 for arsenic in Table 3, replacing it with "No relaxation". The amendment was issued in June 2015 by the Bureau of Indian Standards publication unit in New Delhi, India.

Uploaded by

Sharad Joshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Amendment No. 1 June 2015 TO Is 10500: 2012 Drinking Water - Specification

This document amends the Indian drinking water specification standard IS 10500 from 2012. It changes the maximum limit for fluoride from 0.3 to 1.0 milligrams per liter in Table 2. It also removes the relaxation limit of 0.05 for arsenic in Table 3, replacing it with "No relaxation". The amendment was issued in June 2015 by the Bureau of Indian Standards publication unit in New Delhi, India.

Uploaded by

Sharad Joshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Standard provided by BIS via BSB Edge Private Limited to Humongous Labs (OPC) Pvt. Ltd.

-
Delhi([email protected]) 106.215.88.143 [for non-commercial use only].

AMENDMENT NO. 1 JUNE 2015


TO
IS 10500 : 2012 DRINKING WATER — SPECIFICATION
(Second Revision)

[Page 2, Table 2, Sl No. xii), col 3] — Substitute ‘1.0’ for ‘0.3’.

[Page 3, Table 3, Sl No. x) , col 4] — Substitute ‘No relaxation’ for ‘0.05’.

(FAD 14)
Publication Unit, BIS, New Delhi, India

You might also like