Redmi 10 4G User Guide Uk
Redmi 10 4G User Guide Uk
Before using your phone, you need to set it up first. Among a sea of phone features, some of
them require your special attention and need to be set up carefully.
Turn your phone on and off
SIM cards & mobile networks
Display
Lock screen
Before enjoying surfing the Internet with your phone, you need to insert a SIM card or SIM
cards into your phone.
1. Insert and remove SIM, USIM, and UIM cards
2. SIM, USIM, and UIM card settings
You can only use the services of one mobile carrier on a single-SIM device. Dual-SIM phones
On a dual-SIM device, you can set default SIM cards for making calls and using mobile data
You can edit SIM card names that are displayed on the dial pad. To do this, go to
Settings > SIM cards & mobile networks and tap your SIM card.
Options for changing preferred network types are available in Settings > SIM cards &
mobile networks > SIM card settings > Preferred network type.
Display
You can set the screen brightness, color scheme, and Dark mode according to your
preferences.
1. Adjusting brightness
Go to Settings > Display > Brightness level, and enable Automatic brightness.
Your phone will automatically adjust the screen brightness according to the ambient light.
You can manually adjust the screen brightness using either of the following methods:
• Swipe down from the top right of the status bar to open Control center. Drag the slider
to adjust the screen brightness.
• Go to Settings > Display > Brightness level. Drag the slider to adjust the screen
brightness.
2. Setting a color scheme
Go to Settings > Display > Color scheme, and select a color scheme that you prefer.
Vivid mode will be easier for your eyes and is therefore recommended.
3. Enabling Dark mode
In low light conditions or at night, you can enable Dark mode to apply a darker color scheme,
which helps to prevent excessive screen light from irritating your eyes.
Lock screen
Use your device’s screen lock features to secure your device. By default, the device locks
automatically when the screen times out.
Go to Settings > Lock screen > Sleep, and select a sleep period. Your phone is
automatically locked if no operations are performed within this period.
The first time you turn your phone on, the Setup Wizard guides you through the process of
Follow the prompts to choose a default language, select a country or region, connect to a
Charge your phone using a charger. Do not use unauthorized devices to charge your phone.
You can move your data to a new Android phone from another kind of phone, or start fresh
IMPORTANT: Some of these steps work only on Android 11R and up.
• Make sure you can unlock the old phone with a PIN, pattern, or password.
2. Tap Start. If you don’t see Start, you can copy your data manually.
3. When prompted, choose to copy apps and data from your old phone.
4. If you have a cable to connect your phones, follow the on-screen instructions to copy your
data.
2. Tap Start.
3. When prompted, choose to copy apps and data from your old phone.
• If you have a cable to connect your phones, follow the on-screen instructions to copy
your data.
5. To sync with your new phone, back up your iPhone and iCloud account to Drive.
IMPORTANT: If you don’t have an old phone, you need to know your Google or Mi
account and password to restore some data.
2. Tap Start.
IMPORTANT: The options above will help you restore the most data. If none of these
• If your contacts are on a SIM card, import contacts from the SIM card.
• Music you buy from Play Store or YT Music will automatically show on
• Back up your music from your current phone to your computer. Then, use your
• If you've connected to the Internet, upload files to Drive and back up them
to Photos.
• If you can't connect to the Internet, transfer files between your computer and
phone.
the app.
Use your device’s screen lock features to secure your device. By default, the device locks
You can secure your device and protect your data by setting a PIN for screen lock.
1. Go to Settings > Passwords & security. Tap Screen lock, and tap PIN.
2. Enter 4 to 16 digits.
3. Tap Continue.
Your Redmi 10 5G's fingerprint sensor provides a convenient and secure way to unlock your
1. Go to Settings > Passwords & security. Tap Fingerprint unlock, and confirm your
pin.
2. Place your finger on the fingerprint scanner on the screen and follow the instructions to
IMPORTANT: To add a fingerprint, the screen lock with Pattern, PIN or Password must be
set.
Register your face
You can set Redmi 10 5G to unlock the screen by recognizing your face instead of using a
1. Go to Settings > Passwords & security. Tap Face unlock, and confirm your pin or
2. Keep your face inside the frame on the screen and follow the instructions to complete the
registration of your face. Make sure you are in a well-lit area and your face is not covered or
blocked.
CAUTION:
• Your device might be unlocked with your photo, as well as someone or something that
Accounts
TIP: Accounts may support email, calendars, contacts, and other features. Contact your
Sign in with your Google account to access your Google Cloud Storage and apps installed
from your account, and make full use of your phone’s Android features.
3. Sign in with your Google account. If you do not have a Google account, create one.
Add a Mi account
Sign in with your Mi account to access exclusive Mi content and make full use of Mi apps.
2. Sign in with your Mi account. If you do not have a Mi account, create one.
Navigation bar
You may navigate your device by using either the navigation buttons or full-screen gestures.
Navigation buttons
Home: Tap to return to the Home screen. Tap and hold to launch
the Google Assistant app.
Back: Tap to open the previous screen that you were working in.
Full-screen gestures
You can customize your full-screen gestures by enabling different types of gestures.
A message pops up, prompting you to learn the gestures for system navigation. You can tap
3. In the GESTURE DEMOS field, you can learn the following full-screen gestures:
Make a phone call
You can make phone calls from the Phone app and other apps or widgets that show your
contacts.
Wherever you see a phone number, you can usually tap it to dial.
IMPORTANT: To use the Phone app, you must accept the prompt to set it as your
default.
Send your message
You can send and receive text messages with friends and contacts on Messages.
Start a conversation
3. In the To field at the top, enter the names, phone numbers, or email addresses that you'd
like to message. You can also pick from your top contacts or your whole contact list.
Send a message
2. Enter your message. You can also tap to add a picture or video to your message. If you'd
You can tap and hold SMS or MMS to schedule send your message. For example, set
a schedule to send your message tomorrow at 8 AM. After setting the schedule, tap SMS
or MMS to send the message. Then, keep your phone on and connect it to a Wi-Fi or
You can use the Contacts app to find someone’s contact info or organize contacts with
NOTE: Before choosing a label, ensure that you have organized contacts with
• See contacts from another account: Tap the thumbnail image of the current account at
• See the contacts from all your accounts: Tap the thumbnail image of the current
account on the top right, and tap Contacts from all accounts.
TIP: If you have multiple duplicate contacts, the contacts will be merged into one contact.
Change the look of the Home and Lock screens by choosing a favorite picture, video, or
preloaded wallpaper.
3. Select a wallpaper.
4. Tap Apply and select Set as Lock screen, Set as Home screen, or Set both.
Set a theme to be applied to your Home and Lock screens, wallpapers, and app icons.
1. Open the Themes app to view the available themes. Tap any theme to view details.
With the Camera app, you can capture high-quality pictures and videos and store them
in Gallery, where you can view and edit them.
Camera
1. Tap the Camera app on the Home screen to open your camera.
Go to Settings > Lock screen. Enable Launch Camera. Then, you can open your
camera by pressing the Volume down button twice on the Lock screen.
NOTE: You won't be able to see your Gallery items if you launch Camera on the Lock
Camera modes
Camera modes allow you to determine the ideal mode for your pictures or choose from
From Camera, you can swipe the screen right and left on the menu bar to change
shooting modes.
1. Photo
Photo mode is the default mode. You can swipe left and right to switch between different
Camera modes. You'll find the button for switching between the front and rear cameras
2. Portrait
Switch to Portrait mode and follow the on-screen instructions to make photos with
blurred background.
• Rear camera: Redmi 10 5G uses rear cameras to keep the subject sharp and blur the
background.
• Front camera: Get beautiful portrait shots using software. You can make portrait shots
using the front camera by pressing the special button in Photo mode on some devices.
3. Video
Switch to Video mode to shoot videos. Tap the More icon at the top right of the screen to
4. Pro
Manually adjust the ISO sensitivity, exposure value, white balance color tone, and lenses
In Pro mode, you can tap at the top to enable 50MP Ultra HD.
5. More
Choose other available shooting modes. Tap Edit to drag modes into or out of the Modes
• Panorama
Your phone takes multiple photos in Panorama mode and then combines them into a
seamless shot. Tap the shutter button to start, then follow instructions. Tap again or move
NOTE: Moving your phone too fast may interrupt the process. Stable speed and fixed
• Short video
In Short video mode, your phone can take a 15-second 720P or 1080P 30FPS video clip
In Night mode, your phone can take photos in low-light conditions, without using the
flash.
• 50M
In 50M mode, the 50-megapixel camera captures true-to-life details and hues so that
• Time-lapse
Use Time-lapse mode to capture images slowly over several minutes or even hours, and
then condense them into a short video. This allows you to capture the beauty of change –
• Documents
Use this mode to take a perfectly straight photo of a document. In Documents mode, the
camera will automatically identify a text area within the viewfinder and unskew the image.
Tilt-shift
Tap the More icon in Photo mode and tap Tilt-shift. Focused circle is available by
You'll see a whitened area on your screen while you're shooting tilt-shift photos. The area
out of this whitened area will be blurred when you take a photo.
• Double tap the screen to make the focused and blurred areas switch places.
Timer
Tap the More icon in Photo mode and tap 3S to make photos with a 3-second delay after
you tap the shutter button. Tap 5S or 10S again to set it to 5 or 10 seconds. You'll see the
countdown after you tap the shutter button. Adjust the shooting angle and position during
the countdown.
Keep photos straight or at the center while shooting
This feature allows you to always keep your shots leveled no matter how you tilt your phone.
Tap the More icon in Photo mode, tap the lower-right corner of Gridlines, and then
tap Straighten.
This feature helps you keep your shots at the center no matter how you tilt your phone. Tap
the More icon in Photo mode, tap the lower-right corner of Gridlines, and then tap
Center mark.
Beautify
Tap the Beautify button in Photo mode, and move the slider to adjust the beautification
level. You can also select a favorite filter, such as Nature, Sky blue, and Blush, to beautify
your photo. The Beautify feature is available for both the front and rear cameras.
Beautify provides multiple options for evening out skin tones and enhancing facial
Zoom
You can zoom in and out to achieve the best effect by using gestures.
1. Gesture zoom
Slide two fingers away from each other to zoom in, and bring the fingers together to zoom
out.
NOTE: These gestures will stop working once you've brought zoom to its highest or
lowest values.
You can add time stamps and device watermarks on your photos by toggling the
corresponding switches in the Camera settings. Device watermarks vary with phone models.
Tap More in Photo mode, and tap Settings. In Camera settings, tap Watermark, and
then enable Add time stamp on photos and Device watermark. You can also tap Custom
HDR
HDR is short for high dynamic range. This feature makes multiple shots in order to
underexpose bright areas and overexpose dark spots and combine them together so every
Gallery
Open the Gallery app to view all the visual media stored on your device. You can view,
2. Tap a picture to view it. Swipe left or right to view other pictures or videos.
• Cast: Project the picture from your phone to a bigger external monitor.
• Set as wallpaper: Set the picture as the wallpaper of the Lock or Home scree or
both.
2. Tap a photo to view it, and then tap Edit for the following options:
• Auto: Make the colors of your photo more vivid and bright.
3. Tap Save in the upper right corner or OK in the lower right corner when finished.
Play video
View the videos stored on your device. You can save videos as favorites, and view video
details.
2. Tap a video to view it. Swipe left or right to view other pictures or videos.
• To mark the video as a favorite, tap Favorite. The video is added to Favorites under
• Cast: Project the video from your phone to a bigger external monitor.
Edit video
• Enhance: Allow you to adjust the visual effects of the video, such as exposure,
• Soundtracks: Adjust the volume levels and add background music to the video.
• Aspect ratio: Allow you to change the aspect ratio of the video.
4. Tap Save in the upper right corner, and then confirm when prompted.
3. Tap Share, and then choose an app or connection to use for sharing your selection.
videos.
Create clip
Share photos from the Gallery app by creating a slideshow of your content with video
• Audio: allows you to select a background music or soundtrack for your clip.
• Edit: allows you to add more photos to or delete some photos from the clip.
4. Tap Save.
1. Optimize photos
Sign in to your Mi account and turn on Sync with Xiaomi Cloud. Keeping optimized photos
on your device and storing original files in Xiaomi Cloud will free up a lot of storage space.
2. Delete screenshots
Very often you need screenshots just for a short period of time. Delete the unnecessary
Create Collage
Select 1 to 6 photos to create a collage. Multiple styles and layouts are available.
3. Tap OK. The following styles and layouts are available: Poster, Layout, and Film roll.
4. Tap Save.
Floating windows
Global floating windows are an excellent multitasking solution for mobile devices. You can
use floating windows in multiple scenarios, as well as minimize, maximize, or close them
Control center
MIUI introduces an independent Control center. More space and intuitive animated UI make
it easier for you to perform quick actions and control your device. A new control center style
is presented on this phone, in which you can pull down the status bar on the left to view
To access Control center of the new style, go to Settings > Notifications & Control
center. On the Notifications & Control center screen, tap Control center style, and then tap
New version.
Dark mode
Dark mode allows you to switch to a darker theme to keep your eyes more comfortable at
night, darkening white or bright screens and notifications. MIUI introduces a lot of
improvements for Dark mode. A new non-linear color inversion scheme makes Dark mode
compatible with everything, from third-party apps to wallpapers. Dark mode also
dynamically adjusts the contrast based on the current screen brightness, making your screen
To access Dark mode, go to Settings > Display. On the Display screen, tap Dark mode
Ultra battery saver is a built-in new feature of MIUI. After it is enabled, your phone will
Cast
Cast enables you to project items from your phone’s screen to an external display, such as TV,
through wireless projection. Before using the Cast feature, ensure that your external display
supports Miracast.
1. On the Home screen, tap Settings, and then go to Connection & sharing > Cast.
2. Enable Cast.
Game Turbo
Game Turbo improves your gaming experience through game acceleration. Some games in
the preset game list are automatically boosted when you open them. You can also add your
1. On the Home screen, tap Settings, and then go to Special features > Game Turbo.
Video toolbox
Video toolbox applies special audio and visual effects and features for video playback on
your video player. The default video player is only Mi Video. You can add other video
player apps to Video toolbox.
1. On the Home screen, tap Settings, and then go to Special features > Video toolbox,
Lite mode
Lite mode adopts a more concise layout for easy navigation, and enlarges icons and fonts for
better perception and more straightforward usability. It is designed for seniors and people
1. On the Home screen, tap Settings, and then go to Special features > Lite mode.
After Lite mode is enabled, you can tap Settings, go to Special features > Lite mode
Settings
3. Slide the volume levels to where you want. You can also tap Silent or DND to enable
1. You can view and change your settings from any screen on your phone with Quick Settings.
To see some settings, swipe down from the top of your screen on the right.
• To add a setting, tap on its icon in Available toggles, and then tap Done.
• To remove a setting, tap on its icon in Added toggles, and then tap Done.
Add widgets
Add widgets to your home screens for quick access to info or apps.
3. Touch and hold a widget. Slide the widget to where you want and lift your finger.
Accessibility
There are accessibility settings for people who need help seeing, hearing, or otherwise
operating their phone. Accessibility services are special features that make the phone easy
1. On the Home screen, tap Settings, and then go to Additional settings > Accessibility.
Check for and install available software updates for your phone.
1. On the Home screen, tap Settings, and then tap About phone.
2. Tap MIUI version at the upper-left corner, and tap Check for updates.
3. If any new update is available, download and install it to update your phone. If your system
is up to date, you will see a message stating that no updates are available.
Digital Wellbeing is a dashboard and set of features that give you visibility into how much
you're using your phone, which apps are notifying you the most, and provides a set of tools
to help you manage that use if you choose. Parental controls is a bit more restrictive as it
enables a parent to fully restrict contents and various parts of device usage for their child.
1. On the Home screen, tap Settings, and then tap Digital Wellbeing & parental
controls.
Mi apps
MIUI provides many built-in Mi apps for users to help them in everyday lives, enable them to
work in smarter or more efficient ways, or just stay entertained with the latest music or
video.
Security
Cleaner
1. Clearing trash
Cleaner is one of the features that Security uses to remove trash from your device. You
can delete useless items that are stored on your phone to make sure your phone works fast
and productively.
Open the Security app and tap Cleaner. This will launch an automatic scan for trash,
including these 5 major categories: cache files, obsolete files, packages, residuals, and
memory. Once the scan is complete, you can choose any items to clean up.
After the cleanup is done, you'll be able to see the report which gives you the details of your
storage usage and suggests other options which may help you free up more storage space.
You can add the items you don't want to delete to exceptions. When the scan is complete,
tap and hold an item and select Add to exceptions. This item will be ignored during the
future scans.
Besides using Cleaner proactively, you can also receive notifications when the amount of
trash on your device reaches the preset limit. Tapping the notification will launch Cleaner
automatically.
2. Cleaner settings
You can set reminders and switch between scan definitions in the settings.
• Reminders
Turn on the Remind to clean switch to set trash size limit and schedule alerts. Once the
amount of trash on your phone reaches the limit, you'll receive a notification alerting you to
Security scan
1. Security scan
Security scan is an app that scans your phone to see if it has any hidden viruses or
malicious apps.
It combines virus scan, payment environment scan, and privacy & security scan,
• Scanned items
Security scan resolves the issues related to payments, privacy, and viruses. It ensures that
dangerous apps and viruses in your phone's memory are discovered as soon as possible.
• Payment security
When apps with a payment function are launched, payment security features are launched
by default. You can add payment apps that you want to manage on the results screen.
Various virus definitions and update options are available in the settings.
• Antivirus definitions
Turn on the switch Scan before installing to check the apps that are being installed for
Manage apps
Manage apps is an app that allows you to update and install apps and set permissions for
apps.
1. Uninstalling apps
Select the apps and tap the button below to uninstall them.
• Status
• App name
• Usage frequency
• Used storage
Default apps
Tap the More icon at the upper-right corner of the screen and select Default apps to
3. Permissions
• Autostart
You can manage an app's autostart behavior to prevent abnormal power consumption.
Tap the More icon at the top of the screen to manage autostart permissions for system
apps.
• Permissions
Here you can manage the permissions of all apps installed on your device.
• Other permissions
You can check all the permissions of an app by tapping the app. The switches located next to
You can also sort permissions by type to check for all apps having a specific permission.
Game Turbo
• Optimization: This feature clears memory reserved for the background processes to
• Network: Game Turbo increases the game’s connection speed by limiting the
• Concentration: Notifications will be hidden, and buttons will be restricted. Nothing will
distract you!
You can also create a Home screen shortcut so Game Turbo always stays just a tap away.
2. Adding games
You can add the games that will work with Game Turbo on the start page.
Launch a previously added gaming app on the start page to turn on Game Turbo
automatically.
You can also limit the speed of background downloads, restrict sync, and make sure your
Deep clean
Open Security and scroll down until you see Deep clean. This feature gives you a clear
image of how your phone's memory is being allocated and how trash is being distributed.
• Photos
Deep clean can detect duplicates or redundant images in your Gallery. You can choose
• Apps
You can learn about the number of installed apps and their size, and delete rarely used apps.
• App data
App data that you aren't aware of start to pile up after you use your phone for some time.
This feature ranks them by size. You can also see what apps generated the data here.
• Videos
Here you can see all videos that are saved on your phone. You can delete unnecessary ones
Tap the More icon at the upper-right corner of the Deep clean screen. On the Settings
Battery
Battery allows you to test the phone's power consumption and optimize battery-related
1. Open Security and tap Battery to see how your device consumes power.
2. After the scan, you'll be able to check the battery level, temperature, and capacity. Any
issues you find can be resolved by simply tapping the button at the bottom of the results
page.
3. Check optimized items and choose the power consumption issues that need to be resolved.
4. Switch the mode of Battery saver from Balanced to Save battery to reduce apps'
5. Turn on Ultra battery saver to restrict most power consuming features (such as 5G
Battery allows you to check the power consumption status of different apps and hardware
elements. It also allows you to boost the charging speed, perform reverse wireless charging,
Test network
Whenever you encounter problems with the network, you can run a test of the current
network conditions.
• Wi-Fi network
• Network connection
• Router
After you see the results, you'll be able to resolve the current network problems step by step.
All apps currently connected to the Internet are shown in the test results. Just tap an app to
Blocklist
Blocklist automatically filters all types of spam, phishing, and marketing calls and
messages for you. This screen displays the history of your filtered SMS messages and
incoming calls.
• SMS
Highlighted phone numbers indicate unread messages. Phone numbers will go from red to
Tap a message to read it. You can unblock and restore all messages sent from a particular
number, or reply to messages directly.
Tap the Edit button or tap and hold any SMS message to unblock or delete multiple
messages.
• Incoming calls
Tap a call history record to view the complete history for a particular phone number. You can
choose to unblock this number, return the call, or send an SMS message.
Tap the Edit button or tap and hold any record to unblock or delete multiple items.
2. Blocklist settings
• Blocklist switch
Toggle this switch to turn Blocklist on and off. Once it's turned off, it will no longer
You can use phone numbers, prefixes, and contacts to establish which incoming calls and
• Blocklist notifications
You can choose whether the Notification shade should display the content from a blocked
call or message.
You can choose to block, filter, or allow messages from strangers and services. Options for
You can choose to block or allow calls from strangers, forwarded calls, calls from contacts,
and calls from hidden numbers. Options for contacts are also available.
• SIM 2 settings
You can establish whether the same rules should be applied to SIM card 2, or set up
different rules.
App lock
1. Setting password
Use App lock to protect the data of individual apps and your privacy.
Open Security and tap App lock to set your password. Password type is set to pattern
by default.
When you set your password, tap Change password type to switch between different
password types. Pattern, PIN, and combined password are available now.
After setting your password, you can choose to add your Mi Account. If you forget your
We strongly recommend adding your Mi Account if you use App lock. Unless you add your
account, you'll be able to reset your App lock password only by performing a factory reset.
• Using fingerprints
You can use the fingerprints recorded on your device for App lock verification. You'll have to
When you use App lock for the first time, the feature will check what apps are installed
on your device and recommend the ones that might require protection.
Just toggle the switch next to an app's name to add or remove App lock protection.
Tap the Search box at the top of the screen to search for apps.
Toggle the switch to add or remove App lock protection. When you toggle the switch
off, protection will be removed from all apps along with the App lock password.
You can choose when exactly App lock is applied. Three options are available now.
• When your device is locked: Once verified, App lock won't be applied until you
lock password after you unlock your device or exit a protected app.
• When your device is locked or in 1 minute after exiting app: You'll have to verify
your App lock password after you unlock your device or fail to reopen a
• Changing password
You can change the App lock password type and the password itself.
If you don't want to use your fingerprint with App lock, you can toggle the
corresponding switch. You'll have to verify your fingerprint if you decide to turn on this
feature again.
• Hide content
App lock allows you to hide notification content on the Lock screen and in the
Notification shade for individual apps. You'll see all compatible apps after you tap Hide
You'll see "You have a new message" instead of the actual content when this feature is
on.
This feature allows you to unlock all protected apps by entering the password only once.
• Add Mi Account
You can add your Mi Account to be able to reset your App lock password.
When App lock is on, a dialog which requires password input will appear after you open a
protected app.
You can enter the password or use your fingerprint to unlock the app.
Tap Forgot password to reset your App lock password. The options available to you may
vary depending on whether you add your Mi Account before trying to reset the password.
If you don’t want to open the app, tap the Back button in the upper left corner of the
Hidden apps are different from locked apps in your mobile phone. Once your selected app is
Hide apps allows you to quickly hide apps in your Mi mobile phones.
2. From a list of all the apps in your mobile phone, turn on the app lock for the apps you
want to hide.
Then, the apps you selected have been hidden from your mobile.
Mi Video
In Mi Video, you can watch movies and TV shows purchased. You can also view videos
saved on your device. The Mi Video player can be minimized in the Notification shade.
With Mi Video, you can play, download, stream, and manage your videos all in one place.
You can create playlists and private folders to store the contents you’ll consume in the Mi
Video app. It also lets you change the audio track or adjust the brightness and volume with
gestures.
Music
In Music, you can stream and browse playlists, albums, and artists. You can also play
music saved on your phone. It allows you to easily find the songs you're looking for and
File Manager
File Manager is an easy and powerful file explorer. It helps you easily manage storages on
your device, network-attached storage, and cloud storages. What’s more, you can find how
many files & apps you have on your device at a glance immediately after opening the app.
1. Quick search
Recent files on the start screen are arranged according to the creation date. They are also
2. Storage statistics
Learn what files occupy the internal storage of your device at a glance and see all the items
3. Deep clean
4. Transfer files
Built-in ShareMe functionality allows you to share files with nearby devices without
5. Dark mode
You can change the color scheme of File Manager to Dark mode, making your screen
easier to read.
6. Private files
Allow you to view private files available on your phone. You can also make files private and
Document view
Documents are sorted into various categories, such as images, videos, docs, music, APKs,
Bluetooth & downloads, and archives. You can tap the corresponding category to locate a
document.
Clock
1. Adding alarms
Open the Clock app and tap the icon on the home page to add an alarm. Choose
whether you're adding a repeating alarm, select your ringtone, and tap OK.
2. World clock
In the Clock app, open the World Clock tab and tap the icon to add a clock for a
3. Stopwatch
Open the Stopwatch tab and simply tap the Start button to use the stopwatch. Tap the
button to record time. You can pause and resume your stopwatch as well. Tap Stop
4. Timer
You can set times with duration from 1 second to 23 hours 59 minutes and 59 seconds.
Open the Timer tab and simply tap the button below to start your timer.
Weather
Open the Weather app to view the current weather info and the 5-day forecast.
24-hour forecast, humidity, wind speed, real feel, chance of rain, UV index, pressure, and air
2. Managing locations
Tap the icon at the upper-left corner of the start page to search for cities.
Tap the icon again, tap and hold a city, and tap Delete to delete it. Note that the
3. Weather settings
Tap the More icon at the upper-right corner of the start page, and then tap Settings. You
can set your preferred temperature, wind speed, and air pressure units, as well as allow or
Tap the More icon at the upper-right corner of the start page, then tap Share to send the
Notes
1. Creating a note
Open the Notes app and tap the icon to add a new note. Notes allows you to add text,
To add a voice note, tap the icon, tap the icon, and then speak to your phone.
2. Features
You can use templates, add images, checklists, and voice memos, as well as format text in
Notes.
You can also share your notes as text or images on various platforms.
Open a note, tap the More icon, and then tap Reminder to set a reminder.
Tap and hold any note to hide, pin or unpin, or delete the note or move it to a folder.
3. Deleting notes
Open a note, tap the More icon, and then tap Delete to delete it. Tap and hold a note to
To view deleted notes, tap on the start page and tap Trash. Tap and hold the note you'd
If you can't find the note you need, try looking for it on i.mi.com.
5. Folders
Tap on the start page for the dropdown menu to appear, and select New folder. You
Enter keywords into the search bar on the start page to find specific notes.
7. Hidden notes
Swipe down from the upper part of the screen and stop in the middle to view hidden notes.
8. Tasks
Tap Tasks on the top of the start page. You can tap the icon to create a checklist of
subtasks. For each subtask checklist, you can set a reminder and its repeat interval.
Recorder
1. Recording audio
Open the Recorder app and just tap Record to start recording audio. You can pause
and resume the process, as well as mark specific segments while you're recording.
Tap the Settings icon at the upper-right corner to view available options. Here you can
set recording quality, allow using receiver to play audio, and more.
Screen Recorder
1. Screen Recorder
You can find Screen Recorder in the Tools folder on your Home screen. Open the app and
tap the red button to activate Recorder. Start button will appear at the lower-right
corner of your screen. Get ready and tap this button to start recording.
2. Finish recording
3. Cancel recording
Tap × next to the Start button if you want to cancel recording and quit Screen
Recorder.
4. Manage videos
The videos you record will appear on the start page of Screen Recorder. Here you can
5. Settings
• Resolution: You can record videos with different resolution. Videos with higher
• Video quality: Better video quality means crisper picture and bigger file size.
• Orientation: Define the orientation of recorded videos, which can be Auto, Portrait, or
Landscape.
• Fixed frame rate: Enhance playback on social media platforms and reduce battery life if
• Frame rate: Higher frame rates reduce motion blur in your videos, but require more
system resources. Your device may overheat when you record long videos with high
frame rates.
• Lock screen to end: Lock your device to finish and save the ongoing recording.
• Show touch gestures: A white dot will appear throughout the recording to show the
• Show button taps: Show prompts when pressing Home, Menu, and Back buttons.
Compass
Compass will instruct you to calibrate your device after it detects significant interference.
2. Compass
Tap Compass, and place your device on a horizontal surface to see the compass face.
Hold your phone vertically to see the picture taken by your camera.
3. Level
Swipe left from the start page to use your phone as a level.
Calculator
1. Basic calculator
Basic calculator is the first thing you see when you open Calculator.
2. Scientific calculator
Open Calculator and tap the toggle at the lower left corner to switch to the scientific
calculator, where you can perform operations with trigonometric functions, angular radians,
and roots.
3. Converter
4. Mortgage calculator
With adjustable repayment methods and interest rates, Mortgage calculator makes
You can report the issues you encounter while using your device to our developers. Your
suggestions on how to improve MIUI are welcome, too. We always do our best to fix the
You can access the Services & feedback app using one of the following methods:
• Tap the app icon in the Tools folder on your home screen.
• Go to Settings, scroll down, and tap Services & feedback at the very bottom.
2. Submitting feedback
Check one of the boxes before describing your issue. Use Issues for bugs and Suggestions
for improvements.
Describe the issue you've encountered. You can add images, screen recordings, and logs to
your report.
Select the item your feedback is referring to so that we can locate the issue.
3. Viewing progress
On the Feedback screen, tap My feedback to view the issues you reported.
If our developers comment your feedback, you can reply to them from the Details page of
the issue.
Scanner
Scanner allows you to scan different types of QR codes and bar codes and then tap the
identified result to be redirected to other pages for more services and information.
Position the QR code or bar code inside the frame, and wait for it to be recognized.
Mi Remote
Mi Remote is a universal remote control app that works with your phone's IR Blaster
(Infrared Blaster) port. You can control almost all the appliances in your home with Mi
Remote including TVs, set-top boxes, DVD players, smart boxes, air conditioners, projectors,
Supported brands: Samsung, LG, Sony, Panasonic, Sharp, Haier, Videocon, Micromax, Onida,
etc.
2. All mobile devices can be used to control Mi TV/Mi Box and other smart TVs with standard
protocols over Wi-Fi.
ShareMe
The ShareMe app, which is also known as the Mi Drop app, will help you back up or
seamlessly transfer your files between Android devices or between your mobile device and
your computer.
1. If this is your first time using the ShareMe app, you’ll need to give it access to
2. Once all the permissions are in place, tap the Send button and select the files you
want to transfer. By default, ShareMe displays only the installed apps and packages.
However, you can also send songs, documents, and other audio files.
Once you have selected the files, tap SEND. Meanwhile, on the other phone set the
3. Once everything is set, your phone will begin searching for the receiver phone. If the
phone is nearby, you’ll see the receiver’s avatar on the radar. Simply select it, and the
Downloads
Downloads presents the ongoing download jobs and the finished ones separately.
3. Enter an HTTP or HTTPS link in the box, and then tap Download.
FM Radio
FM Radio (Radio for Mobile) is an app to play Internet Radio stations. It allows you to
listen and enjoy a variety of programs made available by various Internet Radio
Broadcasters across the world. It also allows you to scan and add favorite radio stations.
Cleaner
Cleaner helps you delete files from your smartphone. Thanks to this useful app, you can
delete tons of files you no longer need with the tap of a button. That includes the cache files,
obsolete files, installation packages, residual files from uninstalled apps, and lots of other
To open the app, just tap Cleaner on the Home screen. After that, you'll have a complete
list of all the files Cleaner considers ready for deletion. Browse the results to decide what
stays and what goes, then get rid of everything you want with a single tap on the Clean up
button. You can also see how big each file is, when it was last modified, and where it is
Mi Browser
Mi Browser is a fast and secure full-featured web browser for mobile devices. Top
performance and amazing user experience allow you to surf the web, use search, watch
videos, shop online, and play games. Additional trendy features, such as downloading
images and videos from social media, file management tools, and private folder, will have all
You can download videos and images from Facebook, Instagram, and Twitter. Mi
Browser also lets you save WhatsApp statuses of your friends. Save all the important
Manage files
Manage videos, audio files, and images stored on your device. Add items intended for
Incognito mode
Incognito mode allows you to browse the web safely and privately without leaving any
search or browsing history. You can also turn on/off aggregated data-sharing under this
mode.
Dark mode
Mi Community
Mi Community is our official community forum, the ultimate playground for our Mi fans
to hang out together. With Mi Community, you will be able to join events, share your
views and photos, and meet new friends with the same interests.
Google apps
Assistant
Assistant allows you to get stuff done faster. Instead of performing tasks manually by
tapping your finger on the screen a gazillion times, you can get the job done by using voice
Calendar
The new Calendar app helps you spend less time managing your schedule and more
Schedule view brings your schedule to life and makes it easy to see what’s ahead with
Chrome
Browse the Internet with Chrome and bring your open tabs, bookmarks, and address bar
Contacts
With Contacts, it’s easy to keep all your contact information in one place and reach
several people at once. You can organize, review, and merge your contacts, create personal
mailing lists, and quickly send messages to groups of people you contact the most, without
Drive
Open, view, rename, and share files saved to your Drive cloud account.
Duo
With Duo, it’s easy for you to make one-to-one video calls.
Gmail
Gmail enables you to send and receive emails with Google’s web-based email service.
With Google, you can find online content with tools and learn what interests you, and
Google One
The Google One app lets you automatically back up your phone and manage your Google
cloud storage.
• Automatically back up the important things on your phone, like photos, contacts and
messages using your free 15 GB of storage that comes with every Google account. If you
break, lose or upgrade your phone, you can restore everything to your new Android
device.
• Manage your existing Google account storage across Drive, Gmail and Photos.
Maps
With Maps, you can easily get directions and other location-based information. You must
News
News is a personalized news aggregator that organizes and highlights what’s happening
in the world so you can discover more about the stories that matter to you.
Photos
Store and back up your photos and videos automatically to your Google Account with
Photos.
Play Store
Find new apps, movies and TV shows, music, books, magazines, and games in Play Store.
Podcasts
With Podcasts, you can play the latest episodes from your favorite shows, explore
podcast recommendations just for you, and manage your listening activity.
YouTube
YT Music
Legal information
WEEE
Special precautions must be taken to safely dispose of this product. This marking
indicates that this product may not be discarded with other household waste in the EU.
To prevent harm to the environment or human health from inappropriate waste
disposal, and to promote sustainable reuse of material resources, please recycle responsibly.
To safely recycle your device, please use return and collection systems or contact the retailer
where the device was originally purchased.
To view our Environmental Declaration, please refer to the following link:
www.mi.com/en/about/environment
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for long
periods.
Additional safety information and precautions can be accessed at the following link:
www.mi.com/en/certification
- Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat,
or explode.
- Do not burn the battery, as this may cause fire or explosion.
User shall not remove or alter the battery. Removal or repair of the battery shall only be
done by an authorized repair center of the manufacturer.
Keep your device dry.
Do not try to repair the device yourself. If any part of the device does not work properly,
contact Mi customer support or bring your device to an authorized repair center.
Connect other devices according to their instruction manuals. Do not connect incompatible
devices to this device.
For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be
easily accessible.
Safety Precautions
Observe all applicable laws and rules restricting use of mobile phones in specific situations
and environments.
Do not use your phone at petrol stations or in any explosive atmosphere or potentially
explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer
or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust,
or metal powders. Obey all posted signs to turn off wireless devices such as your phone or other
radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in
areas requiring "two-way radios" or "electronic devices" to be turned off to prevent potential
hazards.
Do not use your phone in hospital operating rooms, emergency rooms, or intensive care
units. Always comply with all rules and regulations of hospitals and health centers. If you have a
medical device, please consult your doctor and the device manufacturer to determine whether
your phone may interfere with the device’s operation. To avoid potential interference with a
pacemaker, always maintain a minimum distance of 15 cm between your mobile phone and the
pacemaker. This can be done by using your phone on the ear opposite to your pacemaker and
not carrying your phone in a breast pocket. To avoid interference with medical equipment, do
not use your phone near hearing aids, cochlear implants, or other similar devices.
Observe all aircraft safety regulations and turn off your phone on board aircraft when
required.
When driving a vehicle, use your phone in accordance with relevant traffic laws and
regulations.
To avoid being struck by lightning, do not use your phone outdoors during thunderstorms.
Do not use your phone to make calls while it is charging.
Do not use your phone in places with high humidity, such as bathrooms. Doing so may result
in electric shock, injury, fire, and charger damage.
Security Statement
Please update your phone’s operating system using the built-in software update feature, or visit
any of our authorized service outlets. Updating software through other means may damage the
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE /5G
NR Digital Mobile Phone with Bluetooth and Wi-Fi 22041219G is in compliance with the essential
requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
www.mi.com/en/certification
This device is in compliance with Specific Absorption Rate (SAR) limits for general
population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0 W/kg)
specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive
2014/53/EU).
During SAR testing, this device was set to transmit at its highest certified power level in all
tested frequency bands and placed in positions that simulate RF exposure during use against
the head with no separation and near the body with a separation of 5 mm.
SAR compliance for body operation is based on a separation distance of 5 mm between the unit
and the human body. This device should be carried at least 5 mm away from the body to ensure
RF exposure level is compliant or lower than the reported level. When attaching the device near
the body, a belt clip or holster should be used which does not contain metallic components and
allows a separation of at least 5 mm to be maintained between the device and the body. RF
exposure compliance was not tested or certified with any accessory containing metal worn on
the body, and use of such an accessory should be avoided.
Legal Information
This device may be operated in all member states of the EU. Observe national and local
regulations where the device is used.
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency
range in the following countries:
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK(NI)
IS LI NO CH TR
• Supports Dual Nano-SIM card slots, either card can be set as the primary card
• Please do not insert non-standard SIM cards into the SIM card slot. They may damage the
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Note
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification, or open Settings and type
“Certification” into the search bar.
Model: 22041219G
2204 indicates that this product will be launched after 202204.
Disclaimer
This quick start guide is published by Xiaomi or its local affiliated company. Improvements and
changes to this guide necessitated by typographical errors, inaccuracies of current information,
or improvements to programs and/or equipment, may be made by Xiaomi at any time and
without notice. Such changes will, however, be incorporated into new online editions of the quick
start guide (please see details at www.mi.com/global/service/userguide). All illustrations are for
illustration purposes only and may not accurately depict the actual device.