SS638: Code of Practice For Electrical Installations
SS638: Code of Practice For Electrical Installations
COURSE OBJECTIVES
Upon completion of this course, participants will be able to:
• Understand the SS638 Code of Practice for Electrical Installations
• Learn the key changes with respect to CP5
• Familiarize with the reassigned codes on amendments made to suit local conditions
MAIN CONTENTS
• Overview of SS638
• Key changes from CP5 to SS638
• Scope, objectives and fundamental principles
• Definitions
• Assessment of general characteristics
• Safety protection
• Selection and erection of equipment
• Inspection and testing
• Special installations or locations requirements
METHODOLOGY
Lecture
TARGET AU DIENCE
Engineering and technical staff who are involved in design and installation of electrical wiring and systems
COURSE DETAILS
Duration : 14 hours
Mode of Delivery : Face-to-face or Synchronous E-learning
Certification : SIPG Certificate of Completion
PDU by PE Board : Pending
Additional Requirement/s : NIL
COURSE FEES
Full Course Fee : S$700 (before GST)
For Singapore Citizens/PR/LTVP+ : S$210 (before GST)
For Singapore Citizens : S$70 (before GST)
(40 years old and above)
ADDITIONAL REMARKS
• Trainee must attain at least 75% attendance rate and pass the assessment to receive Certificate of
Completion and funding grant (if applicable).
• Subsidy of up to 70% is applicable for Singapore Citizens, Permanent Residents or Long-Term Visitor Pass
Plus (LTVP+) Holders, subject to funding agency’s approval.
• Enhanced subsidy of up to 90% is applicable for Singapore Citizens aged 40 years and above, subject
to funding agency’s approval. Note that GST payable will be computed from fee after 70% funding.
• Professional Development Unit (PDU) is applicable for Professional Engineers registered under the
Professional Engineers (PE) Board only.
• All published fees are subject to prevailing GST.
CONTACT U S
For more information, please contact SIPG at +65 6916 7930 or email [email protected].