The document provides an overview of engineering environments, concurrent engineering, virtual test functions, target test functions, project common items, station configuration viewers, custom plant hierarchies, user name and user switching, and security levels for an engineering course. Concurrent engineering allows multiple PCs to engineer simultaneously to reduce time. Virtual test functions enable full-scale system testing without target hardware. Security levels are assigned to function blocks to prevent illegal operations and ensure safety.
The document provides an overview of engineering environments, concurrent engineering, virtual test functions, target test functions, project common items, station configuration viewers, custom plant hierarchies, user name and user switching, and security levels for an engineering course. Concurrent engineering allows multiple PCs to engineer simultaneously to reduce time. Virtual test functions enable full-scale system testing without target hardware. Security levels are assigned to function blocks to prevent illegal operations and ensure safety.
The document provides an overview of engineering environments, concurrent engineering, virtual test functions, target test functions, project common items, station configuration viewers, custom plant hierarchies, user name and user switching, and security levels for an engineering course. Concurrent engineering allows multiple PCs to engineer simultaneously to reduce time. Virtual test functions enable full-scale system testing without target hardware. Security levels are assigned to function blocks to prevent illegal operations and ensure safety.
The document provides an overview of engineering environments, concurrent engineering, virtual test functions, target test functions, project common items, station configuration viewers, custom plant hierarchies, user name and user switching, and security levels for an engineering course. Concurrent engineering allows multiple PCs to engineer simultaneously to reduce time. Virtual test functions enable full-scale system testing without target hardware. Security levels are assigned to function blocks to prevent illegal operations and ensure safety.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group By IGS – Rev 0.0807 OVERVIEW
Engineering Environment
PT YOKOGAWA INDONESIA Training Center – Technical Support Group ENGINEERING ENVIRONMENT OVERVIEW
• There are potentially the following two types of
engineering environments: - Engineering on the target system. - Engineering on other than the target system. • Platform: Generic PC • Concurrent Engineering – Uses multiple machines for parallel engineering • It is able to exchange data with general Windows applications • Virtual Test Functions – Multiple-FCS simulation is possible on a PC – FCSs can communicate with each other
PT YOKOGAWA INDONESIA Training Center – Technical Support Group CONCURRENT ENGINEERING OVERVIEW
• Engineering can be done by multiple PCs simultaneously
• Contributes to reducing engineering time
Engineering PC HIS Master Database
Engineering PC DOWNLOAD the project FCS
Backup Engineering PC
PT YOKOGAWA INDONESIA Training Center – Technical Support Group VIRTUAL TEST FUNCTION OVERVIEW
Full-scale system test can be performed without target hardware.
Real Plant Virtual Test Loading HIS configuration Loading HIS configuration
HIS HIS Configuration Configuration Data Data
FCS
Loading Loading control function control function FCS Simulator Auto Wiring Input Input
Output Real Plant Output Virtual Plant
In PC (HIS) Memory
PT YOKOGAWA INDONESIA Training Center – Technical Support Group TARGET TEST FUNCTION OVERVIEW
Target Test Function
These use actual HIS and FCS for the test.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group Project Common PROJECT Item COMMON ITEM OVERVIEW
Click folder [Common] to open the Common item
PT YOKOGAWA INDONESIA Training Center – Technical Support Group STATION CONFIGURATION VIEWER OVERVIEW
The Station Configuration Viewer displays the overview of the station configured for the project and a printout can be generated. However, modification to the configuration is not allowed in this viewer.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group Custom Plant (Plant Hierarchy) OVERVIEW
A plant hierarchy refers to the various equipment used to operate the plant such as, factories, departments, lines, unit instruments, and devices that are organized into layered architectures according to the ISA S88.01 physical model. The plant hierarchy of the CS 1000/CS 3000 consists of five levels that are assigned features, such as project, station, control drawing, unit, and device, respectively.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group Custom Plant (Plant Hierarchy) OVERVIEW
The CS 1000/CS 3000
system project is usually comprised of multiple stations, while each station is comprised of multiple control drawings. Each multiple control drawing is then comprised of multiple unit instruments, and each unit instrument consists of multiple devices. A function block or element is assigned to each device.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group Custom Plant (Plant Hierarchy) OVERVIEW
By using the plant hierarchy, a range of
equipment in the system can be used in hierarchical and systematic manner, according to the plant’s running and operating states, as well as, the equipment format. This, in turn, allows efficient implementation of engineering, operation and monitoring tasks. In such cases, the operation and monitoring can easily be targeted to a certain range by specifying the name of the equipment in the hierarchy.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group SECURITY BUILDER OVERVIEW
PT YOKOGAWA INDONESIA Training Center – Technical Support Group USER NAME & USER SWITCHING OVERVIEW
Start the Operation and Monitoring Function
OFFUSER
USER A USER B …. USER N
User in User out PT YOKOGAWA INDONESIA Training Center – Technical Support Group SECURITY LEVEL OVERVIEW
Level Monitoring Operation
OFFUSER ONUSER ENGUSER OFFUSER ONUSER ENGUSER
An attribute called “security 1 O O O O O O level” is assigned 2 O O O 1* O O to the function 3 O O O 2* O O blocks. 4 O O O X O O The security policy 5 X O O X X X is set to prevent illegal operations 6 X O O X X O and other 7 X X O X X X problems and 8 X X X X X X ensuring the safety of the system. O : Allowed X : Not allowed 1* : Only alarm settings, sv, mv and block mode can be changed. 2* : Only sv, mv, and block mode can be changed.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group PRIVILEGE LEVEL OVERVIEW
The users’ rights and abilities on operation and monitoring are
defined according to privilege levels.
Default privilege levels
PT YOKOGAWA INDONESIA Training Center – Technical Support Group AUTOMATIC USER OUT TIME OVERVIEW
When an automatic user out-time is defined, the user
automatically changes to the OFFUSER when the automatic user-out time elapsed.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group USER GROUP OVERVIEW
Users group classified into groups based on their operation and monitoring authorities/scopes.
The following attributes are assigned to each user group :
User group name, Operation scope, Operation and monitoring scope, Windows scope, Confirmation operation scope, Messaging scope, Comment
PT YOKOGAWA INDONESIA Training Center – Technical Support Group VALID USER OVERVIEW
Valid User classified into User name based on their users group of operation and monitoring authorities/scopes. Users can be defined to automatic user out time, the users automatically changes to OFFUSER when automatic user out time elapsed.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group DETAIL SETTING OF SECURITY BUILDER OVERVIEW
PT YOKOGAWA INDONESIA Training Center – Technical Support Group OPERATION MARK BUILDER OVERVIEW
Tag label Up to 8 single-byte characters can be entered as the text on the label (string). OPERATION MARK The operation mark label may be temporarily changed during the operation on the HIS Setup window.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group PRIVILEGE LEVEL & COLOR OVERVIEW
The privilege level
required for a user to attach/remove the operation mark.
Color The following colors may be used on operation marks. The color of the operation mark may be temporarily changed on the HIS Setup window.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group ENGINEERING UNIT SYMBOL BUILDER OVERVIEW
One engineering unit
symbol can be defined with up to six alphanumeric characters. The engineering unit symbol is case- sensitive. Multiple engineering unit symbols can be defined. Engineering unit symbols No.1 to 8 cannot be changed or deleted. Define the engineering unit symbol starting at No.9. Note : that the following characters cannot be used to define the engineering unit symbol: , (comma), | (pipe), ‘ (single quotation mark), “ (double quotation mark), @, \ ((backslash), and #
PT YOKOGAWA INDONESIA Training Center – Technical Support Group MANUALLY REGISTER ENGINEERING UNIT OVERVIEW
Uncheck the option button to
manually register the engineering unit symbol
PT YOKOGAWA INDONESIA Training Center – Technical Support Group AUTOMATIC REGISTER ENGINEERING UNIT OVERVIEW
Check the option button to
automatic register the engineering unit symbol
PT YOKOGAWA INDONESIA Training Center – Technical Support Group SWITCH POSITION LABEL BUILDER OVERVIEW
Label 1
Label 3
The switch position labels refer to character strings displayed as labels for switches on the switch instruments,the operations, the logic operation blocks, etc. Up to 64 switch position labels can be used for one project.
PT YOKOGAWA INDONESIA Training Center – Technical Support Group MANUALLY OR AUTOMATIC OVERVIEW
PT YOKOGAWA INDONESIA Training Center – Technical Support Group Alarm Builder ALARM BUILDER OVERVIEW
Alarm status bit position
PT YOKOGAWA INDONESIA Training Center – Technical Support Group OVERVIEW
To be continued…..
PT YOKOGAWA INDONESIA Training Center – Technical Support Group
